Sediment

Sediment is a solid material made of loose particles that is transported to a new location where it is deposited.[1] It occurs naturally and, through the processes of weathering and erosion, is broken down and subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification.

Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments.

## Contents

* 1 Classification
* 1.1 Grain size
* 1.2 Shape
* 1.2.1 Form
* 1.2.2 Roundness
* 1.2.3 Surface texture
* 1.3 Composition
* 2 Sediment transport
* 2.1 Fluvial processes
* 2.2 Aeolian processes: wind
* 2.3 Glacial processes
* 2.4 Mass balance
* 3 Shores and shallow seas
* 3.1 Key marine depositional environments
* 4 Environmental issues
* 4.1 Erosion and agricultural sediment delivery to rivers
* 4.2 Coastal development and sedimentation near coral reefs
* 4.3 Biological considerations
* 5 See also
* 6 References
* 7 Further reading

## Classification

Sediment in the Gulf of Mexico Sediment off the Yucatán Peninsula

Sediment can be classified based on its grain size, grain shape, and composition.

### Grain size

Sediment size is measured on a log base 2 scale, called the "Phi" scale, which classifies particles by size from "colloid" to "boulder".

φ scale | Size range
(metric) | Size range
(inches) | Aggregate class
(Wentworth) | Other names

|
|
|
|

< −8 | > 256 mm | > 10.1 in | Boulder
−6 to −8 | 64–256 mm | 2.5–10.1 in | Cobble
−5 to −6 | 32–64 mm | 1.26–2.5 in | Very coarse gravel | Pebble
−4 to −5 | 16–32 mm | 0.63–1.26 in | Coarse gravel | Pebble
−3 to −4 | 8–16 mm | 0.31–0.63 in | Medium gravel | Pebble
−2 to −3 | 4–8 mm | 0.157–0.31 in | Fine gravel | Pebble
−1 to −2 | 2–4 mm | 0.079–0.157 in | Very fine gravel | Granule
0 to −1 | 1–2 mm | 0.039–0.079 in | Very coarse sand
1 to 0 | 0.5–1 mm | 0.020–0.039 in | Coarse sand
2 to 1 | 0.25–0.5 mm | 0.010–0.020 in | Medium sand
3 to 2 | 125–250 μm | 0.0049–0.010 in | Fine sand
4 to 3 | 62.5–125 μm | 0.0025–0.0049 in | Very fine sand
8 to 4 | 3.9–62.5 μm | 0.00015–0.0025 in | Silt | Mud
> 8 | < 3.9 μm | < 0.00015 in | Clay | Mud
> 10 | < 1 μm | < 0.000039 in | Colloid | Mud

### Shape

Schematic representation of difference in grain shape. Two parameters are shown: sphericity (vertical) and rounding (horizontal).

The shape of particles can be defined in terms of three parameters. The form is the overall shape of the particle, with common descriptions being spherical, platy, or rodlike. The roundness is a measure of how sharp grain corners are. This varies from well-rounded grains with smooth corners and edges to poorly rounded grains with sharp corners and edges. Finally, surface texture describes small-scale features such as scratches, pits, or ridges on the surface of the grain.[2]

#### Form

See also: Sphericity

Form (also called sphericity) is determined by measuring the size of the particle on its major axes. William C. Krumbein proposed formulas for converting these numbers to a single measure of form,[3] such as

ψl=DSDIDL23

where DL, DI, and DS are the long, intermediate, and short axis lengths of the particle.[4] The form ψl varies from 1 for a perfectly spherical particle to very small values for a platelike or rodlike particle.

An alternate measure was proposed by Sneed and Folk:[5]

ψp=DS2DLDI3

which, again, varies from 0 to 1 with increasing sphericity.

#### Roundness

Main article: Earth:Roundness (geology)

Comparison chart for evaluating roundness of sediment grains

Roundness describes how sharp the edges and corners of particle are. Complex mathematical formulas have been devised for its precise measurement, but these are difficult to apply, and most geologists estimate roundness from comparison charts. Common descriptive terms range from very angular to angular to subangular to subrounded to rounded to very rounded, with increasing degree of roundness.[6]

#### Surface texture

Surface texture describes the small-scale features of a grain, such as pits, fractures, ridges, and scratches. These are most commonly evaluated on quartz grains, because these retain their surface markings for long periods of time. Surface texture varies from polished to frosted, and can reveal the history of transport of the grain; for example, frosted grains are particularly characteristic of aeolian sediments, transported by wind. Evaluation of these features often requires the use of a scanning electron microscope.[7]

### Composition

Composition of sediment can be measured in terms of:

* Parent rock lithology
* Mineral composition
* Chemical make-up

This leads to an ambiguity in which clay can be used as both a size-range and a composition (see clay minerals).

## Sediment transport

Sediment builds up on human-made breakwaters because they reduce the speed of water flow, so the stream cannot carry as much sediment load. Glacial transport of boulders. These boulders will be deposited as the glacier retreats.

Main article: Physics:Sediment transport

See also: Rouse number

Sediment is transported based on the strength of the flow that carries it and its own size, volume, density, and shape. Stronger flows will increase the lift and drag on the particle, causing it to rise, while larger or denser particles will be more likely to fall through the flow.

### Fluvial processes

This section is an excerpt from Fluvial sediment processes[ edit ]

### Aeolian processes: wind

Main article: Earth:Aeolian processes

Wind results in the transportation of fine sediment and the formation of sand dune fields and soils from airborne dust.

### Glacial processes

Glacial sediments from Montana

Glaciers carry a wide range of sediment sizes, and deposit it in moraines.

### Mass balance

Main article: Exner equation

The overall balance between sediment in transport and sediment being deposited on the bed is given by the Exner equation. This expression states that the rate of increase in bed elevation due to deposition is proportional to the amount of sediment that falls out of the flow. This equation is important in that changes in the power of the flow change the ability of the flow to carry sediment, and this is reflected in the patterns of erosion and deposition observed throughout a stream. This can be localized, and simply due to small obstacles; examples are scour holes behind boulders, where flow accelerates, and deposition on the inside of meander bends. Erosion and deposition can also be regional; erosion can occur due to dam removal and base level fall. Deposition can occur due to dam emplacement that causes the river to pool and deposit its entire load, or due to base level rise.

## Shores and shallow seas

Seas, oceans, and lakes accumulate sediment over time. The sediment can consist of terrigenous material, which originates on land, but may be deposited in either terrestrial, marine, or lacustrine (lake) environments, or of sediments (often biological) originating in the body of water. Terrigenous material is often supplied by nearby rivers and streams or reworked marine sediment (e.g. sand). In the mid-ocean, the exoskeletons of dead organisms are primarily responsible for sediment accumulation.

Deposited sediments are the source of sedimentary rocks, which can contain fossils of the inhabitants of the body of water that were, upon death, covered by accumulating sediment. Lake bed sediments that have not solidified into rock can be used to determine past climatic conditions.

### Key marine depositional environments

Holocene eolianite and a carbonate beach on Long Island, Bahamas

The major areas for deposition of sediments in the marine environment include:

* Littoral sands (e.g. beach sands, runoff river sands, coastal bars and spits, largely clastic with little faunal content)
* The continental shelf (silty clays, increasing marine faunal content).
* The shelf margin (low terrigenous supply, mostly calcareous faunal skeletons)
* The shelf slope (much more fine-grained silts and clays)
* Beds of estuaries with the resultant deposits called "bay mud".

One other depositional environment which is a mixture of fluvial and marine is the turbidite system, which is a major source of sediment to the deep sedimentary and abyssal basins as well as the deep oceanic trenches.

Any depression in a marine environment where sediments accumulate over time is known as a sediment trap.

The null point theory explains how sediment deposition undergoes a hydrodynamic sorting process within the marine environment leading to a seaward fining of sediment grain size.

## Environmental issues

### Erosion and agricultural sediment delivery to rivers

One cause of high sediment loads is slash and burn and shifting cultivation of tropical forests. When the ground surface is stripped of vegetation and then seared of all living organisms, the upper soils are vulnerable to both wind and water erosion. In a number of regions of the earth, entire sectors of a country have become erodible. For example, on the Madagascar high central plateau, which constitutes approximately ten percent of that country's land area, most of the land area is devegetated, and gullies have eroded into the underlying soil to form distinctive gulleys called lavakas. These are typically 40 meters (130 ft) wide, 80 meters (260 ft) long and 15 meters (49 ft) deep.[8] Some areas have as many as 150 lavakas/square kilometer,[9] and lavakas may account for 84% of all sediments carried off by rivers.[10] This siltation results in discoloration of rivers to a dark red brown color and leads to fish kills. In addition, sedimentation of river basins implies sediment management and siltation costs. The cost of removing an estimated 135 million m3 of accumulated sediments due to water erosion only is likely exceeding 2.3 billion euro (€) annually in the EU and UK, with large regional differences between countries.[11]

Erosion is also an issue in areas of modern farming, where the removal of native vegetation for the cultivation and harvesting of a single type of crop has left the soil unsupported.[12] Many of these regions are near rivers and drainages. Loss of soil due to erosion removes useful farmland, adds to sediment loads, and can help transport anthropogenic fertilizers into the river system, which leads to eutrophication.[13]

The Sediment Delivery Ratio (SDR) is fraction of gross erosion (interill, rill, gully and stream erosion) that is expected to be delivered to the outlet of the river.[14] The sediment transfer and deposition can be modelled with sediment distribution models such as WaTEM/SEDEM.[15] In Europe, according to WaTEM/SEDEM model estimates the Sediment Delivery Ratio is about 15%.[16]

### Coastal development and sedimentation near coral reefs

Watershed development near coral reefs is a primary cause of sediment-related coral stress. The stripping of natural vegetation in the watershed for development exposes soil to increased wind and rainfall and, as a result, can cause exposed sediment to become more susceptible to erosion and delivery to the marine environment during rainfall events. Sediment can negatively affect corals in many ways, such as by physically smothering them, abrading their surfaces, causing corals to expend energy during sediment removal, and causing algal blooms that can ultimately lead to less space on the seafloor where juvenile corals (polyps) can settle.

When sediments are introduced into the coastal regions of the ocean, the proportion of land, marine, and organic-derived sediment that characterizes the seafloor near sources of sediment output is altered. In addition, because the source of sediment (i.e., land, ocean, or organically) is often correlated with how coarse or fine sediment grain sizes that characterize an area are on average, grain size distribution of sediment will shift according to the relative input of land (typically fine), marine (typically coarse), and organically-derived (variable with age) sediment. These alterations in marine sediment characterize the amount of sediment suspended in the water column at any given time and sediment-related coral stress. [17]

### Biological considerations

In July 2020, marine biologists reported that aerobic microorganisms (mainly), in "quasi-suspended animation", were found in organically-poor sediments, up to 101.5 million years old, 250 feet below the seafloor in the South Pacific Gyre (SPG) ("the deadest spot in the ocean"), and could be the longest-living life forms ever found.[18][19]

## See also

* Earth:Bar (river morphology) - Elevated region of sediment in a river that has been deposited by the flow
* Earth:Beach cusps - Shoreline formations made up of various grades of sediment in an arc pattern
* Earth:Biorhexistasy - Theory explaining the formation of soils and transported sediments by changes of climatic conditions
* Earth:Bioswale
* Chemistry:Decantation - Process for the separation of mixtures
* Earth:Deposition (geology) - Geological process in which sediments, soil and rocks are added to a landform or landmass
* Earth:Depositional environment - Processes associated with the deposition of a particular type of sediment
* Earth:Erosion
* Exner equation - Law of sediment aggradation
* Earth:Grain size, also known as particle size - Diameter of individual grains of sediment, or of lithified particles in clastic rocks
* Earth:Sedimentology
* Sediment trap - Any topographic depression where sediments substantially accumulate over time
* Chemistry:Settling - Process by which particulates move towards the bottom of a liquid and form a sediment
* Earth:Surface runoff - Flow of excess rainwater not infiltrating in the ground over its surface

## References

1. ↑ "Sediment". https://education.nationalgeographic.org/resource/sediment/.
2. ↑ Boggs, Sam (2006). Principles of sedimentology and stratigraphy (4th ed.). Upper Saddle River, N.J.: Pearson Prentice Hall. p. 65. ISBN 0-13-154728-3.
3. ↑ Krumbein, William C. (1941). "Measurement and Geological Significance of Shape and Roundness of Sedimentary Particles". SEPM Journal of Sedimentary Research 11: 64–72. doi:10.1306/D42690F3-2B26-11D7-8648000102C1865D.
4. ↑ Boggs 2006, p. 582.
5. ↑ Sneed, Edmund D.; Folk, Robert L. (March 1958). "Pebbles in the Lower Colorado River, Texas a Study in Particle Morphogenesis". The Journal of Geology 66 (2): 114–150. doi:10.1086/626490. Bibcode: 1958JG.....66..114S.
6. ↑ Boggs 2006, pp. 66–67.
7. ↑ Boggs 2006, pp. 68–70.
8. ↑ Sawe, Benjamin Elisha (25 April 2017). "Erosion Landforms: What Is A Lavaka?". WorldAtlas. https://www.worldatlas.com/articles/erosion-landforms-what-is-a-lavaka.html.
9. ↑ Voarintsoa, N. R. G.; Cox, R.; Razanatseheno, M.O.M.; Rakotondrazafy, A.F.M. (1 June 2012). "Relation Between Bedrock Geology, Topography and Lavaka Distribution in Madagascar". South African Journal of Geology 115 (2): 225–250. doi:10.2113/gssajg.115.225. Bibcode: 2012SAJG..115..225V.
10. ↑ Cox, Rónadh; Bierman, Paul; Jungers, Matthew C.; Rakotondrazafy, A.F. Michel (July 2009). "Erosion Rates and Sediment Sources in Madagascar Inferred from 10 Be Analysis of Lavaka, Slope, and River Sediment". The Journal of Geology 117 (4): 363–376. doi:10.1086/598945. Bibcode: 2009JG....117..363C.
11. ↑ Panagos, Panos; Matthews, Francis; Patault, Edouard; De Michele, Carlo; Quaranta, Emanuele; Bezak, Nejc; Kaffas, Konstantinos; Patro, Epari Ritesh et al. (January 2024). "Understanding the cost of soil erosion: An assessment of the sediment removal costs from the reservoirs of the European Union" (in en). Journal of Cleaner Production 434. doi:10.1016/j.jclepro.2023.140183. Bibcode: 2024JCPro.43440183P. https://linkinghub.elsevier.com/retrieve/pii/S095965262304341X.
12. ↑ Ketcheson, J. W. (1 March 1980). "Long-Range Effects of Intensive Cultivation and Monoculture on the Quality of Southern Ontario Soils". Canadian Journal of Soil Science 60 (3): 403–410. doi:10.4141/cjss80-045.
13. ↑ Ohlsson, Thomas (2014). "Sustainability and Food Production". in Motarjemi, Yasmine; Lelieveld, Hubb. Food safety management: a practical guide for the food industry. Elsevier. ISBN 978-0-12-805682-0. https://books.google.com/books?id=sCR3DAAAQBAJ&dq="Monoculture+agriculture"+"eutrophication"&pg=PP6. Retrieved 24 September 2021.
14. ↑ Fernandez, C.; Wu, J. Q.; McCool, D. K.; Stöckle, C. O. (2003-05-01). "Estimating water erosion and sediment yield with GIS, RUSLE, and SEDD" (in en). Journal of Soil and Water Conservation 58 (3): 128–136. ISSN 0022-4561. http://www.jswconline.org/content/58/3/128.
15. ↑ Van Rompaey, Anton J. J.; Verstraeten, Gert; Van Oost, Kristof; Govers, Gerard; Poesen, Jean (2001-10-01). "Modelling mean annual sediment yield using a distributed approach" (in en). Earth Surface Processes and Landforms 26 (11): 1221–1236. doi:10.1002/esp.275. ISSN 1096-9837. Bibcode: 2001ESPL...26.1221V. https://lirias.kuleuven.be/handle/123456789/76728.
16. ↑ Borrelli, P.; Van Oost, K.; Meusburger, K.; Alewell, C.; Lugato, E.; Panagos, P. (2018-02-01). "A step towards a holistic assessment of soil degradation in Europe: Coupling on-site erosion with sediment transfer and carbon fluxes" (in en). Environmental Research 161: 291–298. doi:10.1016/j.envres.2017.11.009. ISSN 0013-9351. PMID 29175727. Bibcode: 2018ER....161..291B.
17. ↑ Risk, Michael J (April 2014). "Assessing the effects of sediments and nutrients on coral reefs". Current Opinion in Environmental Sustainability 7: 108–117. doi:10.1016/j.cosust.2014.01.003. Bibcode: 2014COES....7..108R.
18. ↑ Wu, Katherine J. (28 July 2020). "These Microbes May Have Survived 100 Million Years Beneath the Seafloor - Rescued from their cold, cramped and nutrient-poor homes, the bacteria awoke in the lab and grew.". The New York Times. https://www.nytimes.com/2020/07/28/science/microbes-100-million-years-old.html.
19. ↑ Morono, Yuki (28 July 2020). "Aerobic microbial life persists in oxic marine sediment as old as 101.5 million years". Nature Communications 11 (3626): 3626. doi:10.1038/s41467-020-17330-1. PMID 32724059. Bibcode: 2020NatCo..11.3626M.

## Further reading

* Prothero, Donald R.; Schwab, Fred (1996), Sedimentary Geology: An Introduction to Sedimentary Rocks and Stratigraphy, W. H. Freeman, ISBN 978-0-7167-2726-2
* Siever, Raymond (1988), Sand, New York: Scientific American Library, ISBN 978-0-7167-5021-5, https://archive.org/details/sand00siev
* Nichols, Gary (1999), Sedimentology & Stratigraphy, Malden, MA: Wiley-Blackwell, ISBN 978-0-632-03578-6
* Reading, H. G. (1978), Sedimentary Environments: Processes, Facies and Stratigraphy, Cambridge, Massachusetts: Blackwell Science, ISBN 978-0-632-03627-1

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Sediment. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Earth:Sediment&oldid=4301688"