IEC 61511

This article relies largely or entirely on a single source. Please help improve this article by introducing citations to additional sources.
Find sources: "IEC 61511" – news · newspapers · books · scholar · JSTOR (March 2017)

|

IEC standard 61511 is a technical standard which sets out practices in the engineering of systems that ensure the safety of an industrial process through the use of instrumentation. Such systems are referred to as Safety Instrumented Systems. The title of the standard is "Functional safety - Safety instrumented systems for the process industry sector".

## Contents

* 1 Scope
* 2 History
* 3 The Standard
* 4 References

## Scope

The process industry sector includes many types of manufacturing processes, such as refineries, petrochemical, chemical, pharmaceutical, pulp and paper, and power. The process sector standard does not cover nuclear power facilities or nuclear reactors. IEC 61511 covers the application of electrical, electronic and programmable electronic equipment. While IEC 61511 does apply to equipment using pneumatic or hydraulic systems to manipulate final elements, the standard does not cover the design and implementation of pneumatic or hydraulic logic solvers.

This standard defines the functional safety requirements established by IEC 61508 in process industry sector terminology. IEC 61511 focuses attention on one type of instrumented safety system used within the process sector, the Safety Instrumented System (SIS).

## History

In 1998 the IEC, which stands for International Electrotechnical Commission published a document, IEC 61508, entitled: “Functional safety of electrical/electronic/programmable electronic safety-related systems”. This document sets the standards for safety-related system design of hardware and software. IEC 61508 is generic functional safety standard, providing the framework and core requirements for sector specific standard. Three sector specific standards have been released using the IEC 61508 framework, IEC 61511 (process), IEC 61513 (nuclear) and IEC 62061 (manufacturing/machineries). IEC 61511 provides good engineering practices for the application of safety instrumented systems in the process sector.

In the United States ANSI/ISA 84.00.01-2004 was issued in September 2004. It primarily mirrors IEC 61511 in content with the exception that it contains a grandfathering clause:

> For existing safety instrumented systems (SIS) designed and constructed in accordance with codes, standards, or practices prior to the issuance of this standard (e.g. ANSI/ISA 84.01-1996), the owner/operator shall determine and document that the equipment is designed, maintained, inspected, tested, and operated in a safe manner.

The European standards body, CENELEC, has adopted the standard as EN 61511. This means that in each of the member states of the European Union, the standard is published as a national standard. For example, in Great Britain, it is published by the national standards body, BSI, as BS EN 61511. The content of these national publications is identical to that of IEC 61511. Note, however, that 61511 is not harmonized under any directive of the European Commission.

## The Standard

IEC 61511 covers the design and management requirements for SISs throughout the entire safety life cycle. Its scope includes: initial concept, design, implementation, operation, and maintenance through to decommissioning. It starts in the earliest phase of a project and continues through startup. It contains sections that cover modifications that come along later, along with maintenance activities and the eventual decommissioning activities.

The standard consists of three parts:

1. Framework, definitions, system, hardware and software requirements
2. Guidelines in the application of IEC 61511-1
3. Guidance for the determination of the required safety integrity levels

ISA 84.01/IEC 61511 requires a management system for identified SIS. An SIS is composed of a separate and independent combination of sensors, logic solvers, final elements, and support systems that are designed and managed to achieve a specified safety integrity level (SIL). An SIS may implement one or more safety instrumented functions (SIFs), which are designed and implemented to address a specific process hazard or hazardous event. The SIS management system should define how an owner/operator intends to assess, design, engineer, verify, install, commission, validate, operate, maintain, and continuously improve their SIS. The essential roles of the various personnel assigned responsibility for the SIS should be defined and procedures developed, as necessary, to support the consistent execution of their responsibilities.

ISA 84.01/IEC 61511 uses an order of magnitude metric, the SIL, to establish the necessary performance. A hazard and risk analysis is used to identify the required safety functions and risk reduction for specified hazardous events. Safety functions allocated to the SIS are safety instrumented functions; the allocated risk reduction is related to the SIL. The design and operating basis is developed to ensure that the SIS meets the required SIL. Field data are collected through operational and mechanical integrity program activities to assess actual SIS performance. When the required performance is not met, action should be taken to close the gap, ensuring safe and reliable operation.

IEC 61511 references IEC 61508 (the master standard) for many items such as manufacturers of hardware and instruments and so IEC 61511 cannot be fully implemented without reference to IEC 61508. IEC 61511 is the process industry implementation of IEC 61508. [1]

IEC61511 is updated with Edition 2.0

## References

1. ↑ IEC61511 Part 1 (normative)

* v
* t
* e

List of International Electrotechnical Commission standards

IEC standards|

* IEC 60027
* IEC 60034
* IEC 60038
* IEC 60062
* IEC 60063
* IEC 60068
* IEC 60112
* IEC 60228
* IEC 60269
* IEC 60297
* IEC 60309
* IEC 60320
* IEC 60364
* IEC 60446
* IEC 60559
* IEC 60601
* IEC 60870
* IEC 60870-5
* IEC 60870-6
* IEC 60906-1
* IEC 60908
* IEC 60929
* IEC 60958
* AES3
* S/PDIF
* IEC 61030
* IEC 61131
* IEC 61131-3
* IEC 61158
* IEC 61162
* IEC 61334
* IEC 61346
* IEC 61355
* IEC 61360
* IEC 61400
* IEC 61499
* IEC 61508
* IEC 61511
* IEC 61850
* IEC 61851
* IEC 61883
* IEC 61960
* IEC 61968
* IEC 61970
* IEC 62014-4
* IEC 62056
* IEC 62061
* IEC 62196
* IEC 62262
* IEC 62264
* IEC 62304
* IEC 62325
* IEC 62351
* IEC 62365
* IEC 62366
* IEC 62379
* IEC 62386
* IEC 62455
* IEC 62680
* IEC 62682
* IEC 62700

ISO/IEC standards|

* ISO/IEC 646
* ISO/IEC 2022
* ISO/IEC 4909
* ISO/IEC 5218
* ISO/IEC 6429
* ISO/IEC 6523
* ISO/IEC 7810
* ISO/IEC 7811
* ISO/IEC 7812
* ISO/IEC 7813
* ISO/IEC 7816
* ISO/IEC 7942
* ISO/IEC 8613
* ISO/IEC 8632
* ISO/IEC 8652
* ISO/IEC 8859
* ISO/IEC 9126
* ISO/IEC 9293
* ISO/IEC 9592
* ISO/IEC 9593
* ISO/IEC 9899
* ISO/IEC 9945
* ISO/IEC 9995
* ISO/IEC 10021
* ISO/IEC 10116
* ISO/IEC 10165
* ISO/IEC 10179
* ISO/IEC 10646
* ISO/IEC 10967
* ISO/IEC 11172
* ISO/IEC 11179
* ISO/IEC 11404
* ISO/IEC 11544
* ISO/IEC 11801
* ISO/IEC 12207
* ISO/IEC 13250
* ISO/IEC 13346
* ISO/IEC 13522-5
* ISO/IEC 13568
* ISO/IEC 13818
* ISO/IEC 14443
* ISO/IEC 14496
* ISO/IEC 14882
* ISO/IEC 15288
* ISO/IEC 15291
* ISO/IEC 15408
* ISO/IEC 15444
* ISO/IEC 15445
* ISO/IEC 15504
* ISO/IEC 15511
* ISO/IEC 15693
* ISO/IEC 15897
* ISO/IEC 15938
* ISO/IEC 16262
* ISO/IEC 17024
* ISO/IEC 17025
* ISO/IEC 18000
* ISO/IEC 18004
* ISO/IEC 18014
* ISO/IEC 19752
* ISO/IEC 19757
* ISO/IEC 19770
* ISO/IEC 19788
* ISO/IEC 20000
* ISO/IEC 21000
* ISO/IEC 21827
* ISO/IEC 23000
* ISO/IEC 23003
* ISO/IEC 23008
* ISO/IEC 23270
* ISO/IEC 23360
* ISO/IEC 24707
* ISO/IEC 24727
* ISO/IEC 24744
* ISO/IEC 24752
* ISO/IEC 26300
* ISO/IEC 27000
* ISO/IEC 27000-series
* ISO/IEC 27002
* ISO/IEC 27040
* ISO/IEC 29119
* ISO/IEC 33001
* ISO/IEC 38500
* ISO/IEC 42010
* ISO/IEC 80000

Related|

* International Electrotechnical Commission

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/IEC 61511. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:IEC_61511&oldid=604696"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template