Plastic

Plastics are a wide range of synthetic or semisynthetic materials composed primarily of polymers. Their defining characteristic, plasticity, allows them to be molded, extruded, or pressed into a diverse range of solid forms. This adaptability, combined with a wide range of other properties such as low weight, durability, flexibility, chemical resistance, low toxicity, and low-cost production, has led to their widespread use around the world.[1] While most plastics are produced from natural gas and petroleum, a growing minority are produced from renewable resources like polylactic acid.[2]

Between 1950 and 2017, 9.2 billion metric tons of plastic are estimated to have been made, with more than half of this amount being produced since 2004. In 2023 alone, preliminary figures indicate that over 400 million metric tons of plastic were produced worldwide.[3] If global trends in plastic demand continue, it is projected that annual global plastic production will exceed 1.3 billion tons by 2060.[3] The primary uses for plastic include packaging, which makes up about 40% of its usage, and building and construction, which makes up about 20% of its usage.[1]

The success and dominance of plastics since the early 20th century has had major benefits for mankind, ranging from medical devices to light-weight construction materials. The sewage systems in many countries relies on the resiliency and adaptability of polyvinyl chloride. It is also true that plastics are the basis of widespread environmental concerns,[4] due to their slow decomposition rate in natural ecosystems. Most plastic produced has not been reused. Some is unsuitable for reuse. Much is captured in landfills or as plastic pollution. Particular concern focuses on microplastics. Marine plastic pollution, for example, creates garbage patches. Of all the plastic discarded so far, some 14% has been incinerated and less than 10% has been recycled.[5]

In developed economies, about a third of plastic is used in packaging and roughly the same in buildings in applications such as piping, plumbing or vinyl siding.[6] Other uses include automobiles (up to 20% plastic[6]), furniture, and toys.[6] In the developing world, the applications of plastic may differ; 42% of India's consumption is used in packaging.[6] Worldwide, about 50 kg of plastic is produced annually per person, with production doubling every ten years.

The world's first fully synthetic plastic was Bakelite, invented in New York in 1907, by Leo Baekeland,[7] who coined the term "plastics".[8] Dozens of different types of plastics are produced today, such as polyethylene, which is widely used in product packaging, and polyvinyl chloride (PVC), used in construction and pipes because of its strength and durability. Many chemists have contributed to the materials science of plastics, including Nobel laureate Hermann Staudinger, who has been called "the father of polymer chemistry", and Herman Mark, known as "the father of polymer physics".[9]

## Contents

* 1 Etymology
* 2 Structure
* 3 Classifications
* 3.1 Thermoplastics and thermosetting polymers
* 3.2 Commodity, engineering, and high-performance plastics
* 3.2.1 Commodity plastics
* 3.2.2 Engineering plastics
* 3.2.3 High-performance plastics
* 3.3 Amorphous and crystalline plastics
* 3.4 Conductive polymers
* 3.5 Biodegradable plastics and bioplastics
* 3.5.1 Biodegradable plastics
* 3.5.2 Bioplastics
* 4 Plastic industry
* 4.1 Production
* 4.2 Compounding
* 4.3 Converting
* 5 Gallery
* 6 Applications
* 7 Additives
* 7.1 Leaching
* 7.2 Recycling
* 7.3 Health effects
* 7.3.1 Poor countries
* 7.3.2 Animals
* 7.4 Types of additive
* 8 Health effects
* 8.1 Bisphenol A (BPA)
* 9 Environmental effects
* 9.1 Microplastics
* 9.2 Decomposition of plastics
* 9.3 Recycling
* 9.3.1 Pyrolysis
* 9.4 Greenhouse gas emissions
* 9.4.1 Reducing plastic production as a climate solution
* 9.5 Production of plastics
* 9.6 Incineration of plastics
* 9.7 Facilitation of natural degradation
* 10 History
* 11 Policy
* 12 See also
* 13 References
* 14 Sources
* 15 Further reading
* 16 External links

## Etymology

The word plastic derives from the Ancient Greek πλαστικός (plastikos), meaning "capable of being shaped or molded," which itself comes from πλαστός (plastos), meaning "molded" or "formed."[10] In modern usage, the word plastic most commonly refers to the solid synthetic products of petrochemical-derived manufacturing.[11]

The word plasticity, as a noun, specifically refers to the deformability of the materials used in the manufacture of plastics. Plasticity allows molding, extrusion, or compression into a variety of shapes, including films, fibers, plates, tubes, bottles, and boxes, among many others. In materials science, plasticity also has a more technical definition, describing the nonreversible change in form of solid substances when subjected to external forces. However, this definition extends beyond the scope of this article.[citation needed]

## Structure

See also: Polymer

Most plastics contain organic polymers.[12] The vast majority of these polymers are formed from chains of carbon atoms, with or without the attachment of oxygen, nitrogen or sulfur atoms. These chains comprise many repeating units formed from monomers. Each polymer chain consists of several thousand repeating units. The backbone is the part of the chain that is on the main path, linking together a large number of repeat units. To customize the properties of a plastic, different molecular groups called side chains hang from this backbone; they are usually attached to the monomers before the monomers themselves are linked together to form the polymer chain. The structure of these side chains influences the properties of the polymer.[citation needed]

## Classifications

Plastics are usually classified by the chemical structure of the polymer's backbone and side chains. Important groups classified in this way include the acrylics, polyesters, silicones, polyurethanes, and halogenated plastics. Plastics can be classified by the chemical process used in their synthesis, such as condensation, polyaddition, and cross-linking.[13] They can also be classified by their physical properties, including hardness, density, tensile strength, thermal resistance, and glass transition temperature. Plastics can additionally be classified by their resistance and reactions to various substances and processes, such as exposure to organic solvents, oxidation, and ionizing radiation.[14] Other classifications of plastics are based on qualities relevant to manufacturing or product design for a particular purpose. Examples include thermoplastics, thermosets, conductive polymers, biodegradable plastics, engineering plastics and elastomers.

### Thermoplastics and thermosetting polymers

A plastic handle from a kitchen utensil, deformed by heat and partially melted

One important classification of plastics is the degree to which the chemical processes used to make them are reversible or not.

Thermoplastics do not undergo chemical change in their composition when heated and thus can be molded repeatedly. Examples include polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC).[15]

Thermosets, or thermosetting polymers, can melt and take shape only once: after they have solidified, they stay solid and retain their shape permanently.[16] If reheated, thermosets decompose rather than melt. Examples of thermosets include epoxy resin, polyimide, and Bakelite. The vulcanization of rubber is an example of this process. Before heating in the presence of sulfur, natural rubber (polyisoprene) is a sticky, slightly runny material, and after vulcanization, the product is dry and rigid.

Thermosets consist of closely cross-linked polymers. Cross-links are shown as red dots in the figure.  |  Elastomers consist of wide-meshed cross-linked polymers. The wide mesh allows the material to stretch under tensile load.  |  Thermoplastics consist of non-crosslinked polymers, often with a semi-crystalline structure (shown in red). They have a glass transition temperature and are fusible.

|
|

### Commodity, engineering, and high-performance plastics

#### Commodity plastics

Chemical structures and uses of some common plastics

Approximately 80% of global plastic production includes commodity plastics, a type of plastics primarily chosen for their low cost and ease of manufacturing. These plastics are mass-produced and used in everyday applications such as packaging, food containers, and household products. Most commodity plastics are identifiable by their Resin Identification Codes (RICs), a standardized numbering system developed by ASTM International.

Polyethylene terephthalate (PET or PETE)
High-density polyethylene (HDPE or PE-HD)
Polyvinyl chloride (PVC or V)
Low-density polyethylene (LDPE or PE-LD),
Polypropylene (PP)
Polystyrene (PS)

Beyond the six most widely recognized listed above, there are more commodity plastics that are also mass-produced and commonly used, such as polyurethanes (PURs). PURs are a class of plastics also designated as commodity plastics due to their low cost, ease of manufacturing, and versatility. However, they lack RICs because they encompass many chemically diverse formulations such as foams and adhesives.

Packaging represents the largest application of commodity plastics, consuming 146 million metric tons (36% of global production) in 2015 alone. Beyond packaging, however, these plastics are critical in various other fields such as agriculture, construction, consumer goods, and healthcare.

Although many traits such as durability and resistance to biodegradability are desirable in various applications, they have led to significant environmental issues. An estimated 8 to 12 million tons of plastic enter oceans annually, primarily from mismanaged packaging waste. Commodity plastics account for the majority of this pollution, as their recycling rates remain low (e.g., only ~9% of all plastics are recycled globally). Microplastics derived from their degradation further threaten ecosystems and human health.

A huge number of plastics exist beyond the commodity plastics, with many having exceptional properties.

Template:Div flex row <graph>{"legends":[{"properties":{"legend":{"y":{"value":-110}},"title":{"fill":{"value":"#54595d"}},"labels":{"fill":{"value":"#54595d"}}},"stroke":"color","title":"Polymer","fill":"color"}],"scales":[{"domain":{"data":"chart","field":"x"},"type":"ordinal","name":"color","range":"category10"}],"version":2,"marks":[{"type":"arc","properties":{"hover":{"fill":{"value":"red"}},"update":{"fill":{"scale":"color","field":"x"}},"enter":{"endAngle":{"field":"layout_end"},"innerRadius":{"value":0},"outerRadius":{"value":110},"startAngle":{"field":"layout_start"},"stroke":{"value":"white"},"fill":{"scale":"color","field":"x"},"strokeWidth":{"value":1}}},"from":{"data":"chart","transform":[{"type":"pie","field":"y"}]}},{"type":"text","properties":{"enter":{"theta":{"field":"layout_mid"},"baseline":{"value":"bottom"},"align":{"value":"center"},"text":{"template":"{{datum.y|number:'.1%'}}"},"y":{"group":"height","mult":0.5},"x":{"group":"width","mult":0.5},"fontSize":{"value":11},"angle":{"mult":57.29577951308232,"field":"layout_mid"},"radius":{"offset":5,"value":110},"fill":{"value":"#54595d"}}},"from":{"data":"chart","transform":[{"field":"y","type":"pie"}]}}],"height":110,"axes":[],"data":[{"format":{"parse":{"y":"number","x":"string"},"type":"json"},"name":"chart","values":[{"y":0.157,"x":"LDPE"},{"y":0.128,"x":"HDPE"},{"y":0.167,"x":"PP"},{"y":0.061,"x":"PS"},{"y":0.093,"x":"PVC"},{"y":0.081,"x":"PET"},{"y":0.066,"x":"PUR"},{"y":0.145,"x":"PP&A Fibers"},{"y":0.039,"x":"All Others"},{"y":0.061,"x":"Additives"}]}],"width":110}</graph>

Global plastic production by polymer type (2015)[17] Polymer | Production (Mt) | Percentage of all plastics (%) | Polymer type | Thermal character

|
|
|
|

Low-density polyethylene (LDPE) | 64 | 15.7 | Polyolefin | Thermoplastic
High-density polyethylene (HDPE) | 52 | 12.8 | Polyolefin | Thermoplastic
polypropylene (PP) | 68 | 16.7 | Polyolefin | Thermoplastic
Polystyrene (PS) | 25 | 6.1 | Unsaturated polyolefin | Thermoplastic
Polyvinyl chloride (PVC) | 38 | 9.3 | Halogenated | Thermoplastic
Polyethylene terephthalate (PET) | 33 | 8.1 | Condensation | Thermoplastic
Polyurethane (PUR) | 27 | 6.6 | Condensation | Thermoset[18]
PP&A Fibers[19] | 59 | 14.5 | Condensation | Thermoplastic
All Others | 16 | 3.9 | Various | Varies
Additives | 25 | 6.1 | - | \-
Total | 407 | 100 | - | \-

Template:Div flex row end

#### Engineering plastics

Engineering plastics are more robust and are used to manufacture products such as vehicle parts, building and construction materials, and some machine parts. In some cases, they are polymer blends formed by mixing different plastics together (ABS, HIPS etc.). Engineering plastics can replace metals in vehicles, lowering their weight and improving fuel efficiency by 6–8%. Roughly 50% of the volume of modern cars is made of plastic, but this only accounts for 12–17% of the vehicle weight.[20]

* Acrylonitrile butadiene styrene (ABS): electronic equipment cases (e.g., computer monitors, printers, keyboards) and drainage pipes
* High-impact polystyrene (HIPS): refrigerator liners, food packaging, and vending cups
* Polycarbonate (PC): compact discs, eyeglasses, riot shields, security windows, traffic lights, and lenses
* Polycarbonate + acrylonitrile butadiene styrene (PC + ABS): a blend of PC and ABS that creates a stronger plastic used in car interior and exterior parts, and in mobile phone bodies
* Polyethylene + acrylonitrile butadiene styrene (PE + ABS): a slippery blend of PE and ABS used in low-duty dry bearings
* Polymethyl methacrylate (PMMA) (acrylic): contact lenses (of the original "hard" variety), glazing (best known in this form by its various trade names around the world; e.g. Perspex, Plexiglas, and Oroglas), fluorescent-light diffusers, and rear light covers for vehicles. It also forms the basis of artistic and commercial acrylic paints, when suspended in water with the use of other agents.
* Silicones (polysiloxanes): heat-resistant resins used mainly as sealants but also used for high-temperature cooking utensils and as a base resin for industrial paints
* Urea-formaldehyde (UF): one of the aminoplasts used as a multi-colorable alternative to phenolics: used as a wood adhesive (for plywood, chipboard, hardboard) and electrical switch housings

#### High-performance plastics

High-performance plastics are a category of polymers exhibiting superior properties compared to commodity and engineering plastics. These plastics can withstand high temperatures, often above 302°F (150°C), are highly resistant to chemical corrosion and degradation, have excellent mechanical and electric properties, and are lightweight and extremely versatile.

* Aramids: best known for their use in the manufacture of body armor, this class of heat-resistant and strong synthetic fibers also has applications in aerospace and military and includes Kevlar, Nomex, and Twaron.
* Ultra-high-molecular-weight polyethylenes (UHMWPE)
* Polyetheretherketone (PEEK): strong, chemical- and heat-resistant thermoplastic; its biocompatibility allows for use in medical implant applications and aerospace moldings. It is one of the most expensive commercial polymers.
* Polyetherimide (PEI): a high-temperature, chemically stable polymer that does not crystallize
* Polyimide: a high-temperature plastic used in materials such as Kapton tape
* Polysulfone (PS): high-temperature melt-processable resin used in membranes, filtration media, water heater dip tubes and other high-temperature applications
* Polytetrafluoroethylene (PTFE): heat-resistant, low-friction coatings used in non-stick surfaces for frying pans, plumber's tape, and water slides
* Polyamide-imide (PAI): high-performance engineering plastic extensively used in high-performance gears, switches, transmissions, and other automotive components and aerospace parts[21]
* Polyphenylene sulfide (PPS): extreme chemical resistance, flame retardancy, and thermal stability (up to 428°F).
* Polyethersulfone (PES): best known for their clarity, high-temperature resistance (up to 392°F), and biocompatibility. Commonly used in medical devices, food-grade equipment, and aerospace lighting.
* Polyvinylidene fluoride (PVDF): a nonreactive thermoplastic fluoropolymer known for extreme chemical resistance, ultraviolet stability, and piezoelectric properties. Commonly used in semiconductor tubing, lithium-ion battery binders, and architectural coatings.
* Liquid-crystal polymers (LCPs): a class of polymers combining the properties of both liquids and crystals, known for extreme dimensional stability, low thermal expansion, and high dielectric strength. Commonly used in miniature electronics, fiber-optic cables, and surgical devices.
* Polyimides (PIs): a class of high-performance thermosets, able to operate up to 572°F and best known for their excellent dielectric properties and radiation resistance. Commonly used in flexible printed circuits, space suit layers, and jet engine components.
* Polybenzimidazole (PBI): extremely high heat resistance (up to 752°F short-term), low outgassing, and flame resistance. Commonly used in firefighting gear, semiconductor tools, and aerospace thermal shields.
* Bismaleimide (BMI): known for its high glass transition temperature (around 482°F) and low moisture absorption. Commonly used in composite aircraft matrices and military radar systems.
* Cyanate esters: known for their low dielectric loss and space-grade radiation resistance. Commonly used in satellite components and radar antennas.

### Amorphous and crystalline plastics

Many plastics are completely amorphous, meaning they lack a highly ordered molecular structure.[22] Crystalline plastics exhibit a pattern of more regularly spaced atoms, such as high-density polyethylene (HDPE), polybutylene terephthalate (PBT), and polyether ether ketone (PEEK). However, some plastics are partially amorphous and partially crystalline in molecular structure, giving them both a melting point and one or more glass transitions (the temperature above which the extent of localized molecular flexibility is substantially increased). These so-called semi-crystalline plastics include polyethylene, polypropylene, polyvinyl chloride, polyamides (nylons), polyesters and some polyurethanes.

### Conductive polymers

Main article: Chemistry:Conductive polymer

Intrinsically conducting polymers (ICPs) are organic polymers that conduct electricity. While a conductivity of up to 80 kilosiemens per centimeter (kS/cm) in stretch-oriented polyacetylene[23] has been achieved, it does not approach that of most metals. For example, copper has a conductivity of several hundred kS/cm.[24]

### Biodegradable plastics and bioplastics

#### Biodegradable plastics

Main article: Chemistry:Biodegradable plastic

Biodegradable plastics are plastics that degrade (break down) upon exposure to biological factors, such as sunlight, ultra-violet radiation, moisture, bacteria, enzymes, or wind abrasion. Attacks by insects, such as waxworms and mealworms, can also be considered forms of biodegradation. Aerobic degradation requires the plastic to be exposed at the surface, whereas anaerobic degradation would be effective in landfill or composting systems. Some companies produce biodegradable additives to further promote biodegradation. Although starch powder can be added as a filler to facilitate degradation of some plastics, such treatment does not lead to complete breakdown. Some researchers have genetically engineered bacteria to synthesize completely biodegradable plastics, such as polyhydroxybutyrate (PHB); however, As of 2021,[update] these were still relatively expensive.[25]

#### Bioplastics

Main article: Chemistry:Bioplastic

While most plastics are produced from petrochemicals, bioplastics are made substantially from renewable plant materials like cellulose and starch.[26] Due both to the finite limits of fossil fuel reserves and to rising levels of greenhouse gases caused primarily by the burning of those fuels, the development of bioplastics is a growing field.[27][28] Global production capacity for bio-based plastics is estimated at 327,000 tonnes per year. In contrast, global production of polyethylene (PE) and polypropylene (PP), the world's leading petrochemical-derived polyolefins, was estimated at over 150 million tonnes in 2015.[29]

## Plastic industry

The plastic industry includes the global production, compounding, conversion and sale of plastic products. Although the Middle East and Russia produce most of the required petrochemical raw materials, the production of plastic is concentrated in the global East and West. The plastic industry comprises a huge number of companies and can be divided into several sectors:

### Production

Between 1950 and 2017, 9.2 billion tonnes of plastic are estimated to have been made, with more than half of this having been produced since 2004. Since the birth of the plastic industry in the 1950s, global production has increased enormously, reaching 400 million tonnes a year in 2021; this is up from 381 million metric tonnes in 2015 (excluding additives).[5][17] From the 1950s, rapid growth occurred in the use of plastics for packaging, in building and construction, and in other sectors.[5] If global trends on plastic demand continue, it is estimated that by 2050 annual global plastic production will exceed 1.1-billion tonnes annually.[5]

* Polypropylene plants
* A Slovnaft facility in Bratislava, Slovakia

* A SOCAR Polymer polypropylene plant in Sumgayit, Azerbaijan

<graph>{"legends":[],"scales":[{"type":"linear","name":"x","zero":false,"domain":{"data":"chart","field":"x"},"range":"width","nice":true},{"type":"linear","name":"y","domain":{"data":"chart","field":"y"},"zero":false,"range":"height","nice":true},{"domain":{"data":"chart","field":"series"},"type":"ordinal","name":"color","range":"category10"}],"version":2,"marks":[{"type":"line","properties":{"hover":{"stroke":{"value":"red"}},"update":{"stroke":{"scale":"color","field":"series"}},"enter":{"y":{"scale":"y","field":"y"},"x":{"scale":"x","field":"x"},"stroke":{"scale":"color","field":"series"},"strokeWidth":{"value":2.5}}},"from":{"data":"chart"}},{"type":"rule","properties":{"update":{"y":{"value":0},"x":{"scale":"x","field":"x"},"opacity":{"value":0.75},"y2":{"field":{"group":"height"}},"stroke":{"value":"#54595d"},"strokeWidth":{"value":"#54595d"}}},"from":{"data":"v_anno"}},{"type":"text","properties":{"update":{"y":{"offset":-3,"field":{"group":"height"}},"x":{"scale":"x","offset":3,"field":"x"},"opacity":{"value":0.75},"baseline":{"value":"top"},"text":{"field":"label"},"angle":{"value":-90},"fill":{"value":"#54595d"}}},"from":{"data":"v_anno"}}],"height":250,"axes":[{"type":"x","title":"","scale":"x","format":"d","properties":{"title":{"fill":{"value":"#54595d"}},"grid":{"stroke":{"value":"#54595d"}},"ticks":{"stroke":{"value":"#54595d"}},"axis":{"strokeWidth":{"value":2},"stroke":{"value":"#54595d"}},"labels":{"fill":{"value":"#54595d"}}},"grid":true},{"type":"y","title":"Million metric tonnes","scale":"y","format":"d","properties":{"title":{"fill":{"value":"#54595d"}},"grid":{"stroke":{"value":"#54595d"}},"ticks":{"stroke":{"value":"#54595d"}},"axis":{"strokeWidth":{"value":2},"stroke":{"value":"#54595d"}},"labels":{"fill":{"value":"#54595d"}}},"grid":true}],"data":[{"format":{"parse":{"y":"integer","x":"integer"},"type":"json"},"name":"chart","values":[{"y":2,"series":"y","x":1950},{"y":2,"series":"y","x":1951},{"y":2,"series":"y","x":1952},{"y":3,"series":"y","x":1953},{"y":3,"series":"y","x":1954},{"y":4,"series":"y","x":1955},{"y":5,"series":"y","x":1956},{"y":5,"series":"y","x":1957},{"y":6,"series":"y","x":1958},{"y":7,"series":"y","x":1959},{"y":8,"series":"y","x":1960},{"y":9,"series":"y","x":1961},{"y":11,"series":"y","x":1962},{"y":13,"series":"y","x":1963},{"y":15,"series":"y","x":1964},{"y":17,"series":"y","x":1965},{"y":20,"series":"y","x":1966},{"y":23,"series":"y","x":1967},{"y":27,"series":"y","x":1968},{"y":32,"series":"y","x":1969},{"y":35,"series":"y","x":1970},{"y":38,"series":"y","x":1971},{"y":44,"series":"y","x":1972},{"y":51,"series":"y","x":1973},{"y":52,"series":"y","x":1974},{"y":46,"series":"y","x":1975},{"y":54,"series":"y","x":1976},{"y":59,"series":"y","x":1977},{"y":64,"series":"y","x":1978},{"y":71,"series":"y","x":1979},{"y":70,"series":"y","x":1980},{"y":72,"series":"y","x":1981},{"y":73,"series":"y","x":1982},{"y":80,"series":"y","x":1983},{"y":86,"series":"y","x":1984},{"y":90,"series":"y","x":1985},{"y":96,"series":"y","x":1986},{"y":104,"series":"y","x":1987},{"y":110,"series":"y","x":1988},{"y":114,"series":"y","x":1989},{"y":120,"series":"y","x":1990},{"y":124,"series":"y","x":1991},{"y":132,"series":"y","x":1992},{"y":137,"series":"y","x":1993},{"y":151,"series":"y","x":1994},{"y":156,"series":"y","x":1995},{"y":168,"series":"y","x":1996},{"y":180,"series":"y","x":1997},{"y":188,"series":"y","x":1998},{"y":202,"series":"y","x":1999},{"y":213,"series":"y","x":2000},{"y":218,"series":"y","x":2001},{"y":231,"series":"y","x":2002},{"y":241,"series":"y","x":2003},{"y":256,"series":"y","x":2004},{"y":263,"series":"y","x":2005},{"y":280,"series":"y","x":2006},{"y":295,"series":"y","x":2007},{"y":281,"series":"y","x":2008},{"y":288,"series":"y","x":2009},{"y":313,"series":"y","x":2010},{"y":325,"series":"y","x":2011},{"y":338,"series":"y","x":2012},{"y":352,"series":"y","x":2013},{"y":367,"series":"y","x":2014},{"y":381,"series":"y","x":2015}]},{"format":{"parse":{"x":"integer"},"type":"json"},"name":"v_anno","values":[{"label":"","x":"1975"},{"label":"","x":"2008"}]}],"width":500}</graph>

Annual global plastic production 1950–2015.[17] Vertical lines denote the 1973–1975 recession and the 2008 financial crisis which caused brief lowering of plastic production.

Plastics are produced in chemical plants by the polymerization of their starting materials (monomers); which are almost always petrochemical in nature. Such facilities are normally large and are visually similar to oil refineries, with sprawling pipework running throughout. The large size of these plants allows them to exploit economies of scale. Despite this, plastic production is not particularly monopolized, with about 100 companies accounting for 90% of global production.[30] This includes a mixture of private and state-owned enterprises. Roughly half of all production takes place in East Asia, with China being the largest single producer. Major international producers include:

Global plastic production (2020)[31] Region | Global production

|

China | 31%
Japan | 3%
Rest of Asia | 17%
NAFTA | 19%
Latin America | 4%
Europe | 16%
CIS | 3%
Middle East & Africa | 7%

* Dow Chemical
* LyondellBasell
* ExxonMobil
* SABIC
* BASF
* Sibur
* Shin-Etsu Chemical
* Indorama Ventures
* Sinopec
* Braskem

Historically, Europe and North America have dominated global plastics production. However, since 2010 Asia has emerged as a significant producer, with China accounting for 31% of total plastic resin production in 2020.[31] Regional differences in the volume of plastics production are driven by user demand, the price of fossil fuel feedstocks, and investments made in the petrochemical industry. For example, since 2010 over US$200 billion has been invested in the United States in new plastic and chemical plants, stimulated by the low cost of raw materials. In the European Union (EU), too, heavy investments have been made in the plastics industry, which employs over 1.6-million people with a turnover of more than 360 billion euros per year. In China in 2016 there were over 15,000 plastic manufacturing companies, generating more than US$366 billion in revenue.[5]

In 2017, the global plastics market was dominated by thermoplastics– polymers that can be melted and recast. Thermoplastics include polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS) and synthetic fibers, which together represent 86% of all plastics.[5]

### Compounding

Plastic compounding scheme for a thermosoftening material

Plastic is not sold as a pure unadulterated substance, but is instead mixed with various chemicals and other materials, which are collectively known as additives. These are added during the compounding stage and include substances such as stabilizers, plasticizers and dyes, which are intended to improve the lifespan, workability or appearance of the final item. In some cases, this can involve mixing different types of plastic together to form a polymer blend, such as high impact polystyrene. Large companies may do their own compounding prior to production, but some producers have it done by a third party. Companies that specialize in this work are known as Compounders.

The compounding of thermosetting plastic is relatively straightforward; as it remains liquid until it is cured into its final form. For thermosoftening materials, which are used to make the majority of products, it is necessary to melt the plastic in order to mix-in the additives. This involves heating it to anywhere between 150–320 °C (300–610 °F). Molten plastic is viscous and exhibits laminar flow, leading to poor mixing. Compounding is therefore done using extrusion equipment, which is able to supply the necessary heat and mixing to give a properly dispersed product.

The concentrations of most additives are usually quite low, however high levels can be added to create Masterbatch products. The additives in these are concentrated but still properly dispersed in the host resin. Masterbatch granules can be mixed with cheaper bulk polymer and will release their additives during processing to give a homogeneous final product. This can be cheaper than working with a fully compounded material and is particularly common for the introduction of color.

### Converting

File:Plastic Injection Molding.webm

Short video on injection molding (9 min 37 s)

Blow molding a plastic drinks bottle

Converters (sometimes known as processors) are companies or specialists that fabricate finished plastic products from raw materials, often in the form of resins, pellets, or films.

* Injection molding: involves injecting molten plastic into a mold cavity under high pressure. The plastic solidifies in the mold to form the desired shape.
* Blow molding: involves heating a plastic tube called a parison and inflating it inside a mold to form hollow products such as bottles and toys.
* Rotational molding: involves rotating a mold on two axes while it is heated. Plastic powder is added to the mold and melts and sticks to the walls as the mold is rotated, which forms thick-walled hollow parts such as intermediate bulk containers.
* Casting: involves pouring liquid resin into a mold where it solidifies into a predesigned shape.
* Film blowing: involves heating a polymer and blowing it into a thin, continuous sheet. Commonly used for making polyethylene and polypropylene films used in packaging.
* Spinning: involves transforming a polymer melt or solution into continuous strands
* 3D printing: involves three-dimensionally printing an object layer by layer following a digital model using computer-aided design software.

For thermosetting materials, the process is slightly different, as the plastics are liquid to begin with and but must be cured to give solid products, but much of the equipment is broadly similar.

The most commonly produced plastic consumer products include packaging made from LDPE (e.g. bags, containers, food packaging film), containers made from HDPE (e.g. milk bottles, shampoo bottles, ice cream tubs), and PET (e.g. bottles for water and other drinks). Together these products account for around 36% of plastics use in the world. Most of them (e.g. disposable cups, plates, cutlery, takeaway containers, carrier bags) are used for only a short period, many for less than a day. The use of plastics in building and construction, textiles, transportation and electrical equipment also accounts for a substantial share of the plastics market. Plastic items used for such purposes generally have longer life spans. They may be in use for periods ranging from around five years (e.g. textiles and electrical equipment) to more than 20 years (e.g. construction materials, industrial machinery).[5]

Plastic consumption differs among countries and communities, with some form of plastic having made its way into most people's lives. North America (i.e. the North American Free Trade Agreement or NAFTA region) accounts for 21% of global plastic consumption, closely followed by China (20%) and Western Europe (18%). In North America and Europe, there is high per capita plastic consumption (94 kg and 85 kg/capita/year, respectively). In China, there is lower per capita consumption (58 kg/capita/year), but high consumption nationally because of its large population.[5]

## Gallery

* Water bottles made of PET

* High density polythene (HDPE) is used for making sturdy containers; transparent containers may be made of PET.

* Disposable suits can be made from non-woven HDPE fabric.

* Plastic mailing envelopes made of HDPE

* A Ziploc bag made of LDPE

* Food wrap made of LDPE

* Metalized polypropylene film is a commonly used snack pack material.[32]

* Kinder Joy shell made of polypropylene

* A polypropylene chair

* Stools made of HDPE

* Expanded polystyrene foam ("Thermocol")

* Extruded polystyrene foam ("Styrofoam")

* Thermocol take-away food container

* Egg tray made of PETE

* A piece of packaging foam made of LDPE

* A kitchen sponge made of polyurethane foam

* Non-stick cookware with Teflon coating

* iPhone 5c, a smartphone with a polycarbonate "unibody" shell

* To withstand the extreme water pressure, this 10-meter deep Monterey Bay Aquarium tank has windows made of acrylic glass up to 33 cm thick.

* PVC pipes

* PVC blister pack

## Applications

The largest application for plastics is as packaging materials, but they are used in a wide range of other sectors, including: construction (pipes, gutters, door and windows), textiles (stretchable fabrics, fleece), consumer goods (toys, tableware, toothbrushes), transportation (headlights, bumpers, body panels, wing mirrors), electronics (phones, computers, televisions) and as machine parts.[17] In optics, plastics are used to manufacture aspheric lenses.[33]

<graph>{"legends":[],"scales":[{"type":"ordinal","name":"x","zero":false,"domain":{"data":"chart","field":"x"},"padding":0.2,"range":"width","nice":true},{"type":"linear","name":"y","domain":{"data":"chart","field":"y"},"zero":true,"range":"height","nice":true},{"domain":{"data":"chart","field":"series"},"type":"ordinal","name":"color","range":"category10"}],"version":2,"marks":[{"type":"group","from":{"data":"chart","transform":[{"groupby":"x","type":"facet"}]},"properties":{"enter":{"width":{"scale":"x","band":true},"x":{"scale":"x","field":"key"}}},"marks":[{"properties":{"hover":{"fill":{"value":"red"}},"update":{"fill":{"scale":"color","field":"series"}},"enter":{"y":{"scale":"y","field":"y"},"x":{"scale":"series","field":"series"},"y2":{"scale":"y","value":0},"width":{"scale":"series","offset":-1,"band":true},"fill":{"scale":"color","field":"series"}}},"type":"rect"},{"properties":{"enter":{"baseline":{"value":"middle"},"align":{"value":"left"},"text":{"field":"y"},"y":{"scale":"y","offset":-4,"field":"y"},"dy":{"scale":"series","mult":0.5,"band":true},"x":{"scale":"series","field":"series"},"angle":{"value":-90},"fontSize":{"value":11},"fill":{"value":"#54595d"}}},"type":"text"}],"scales":[{"domain":{"field":"series"},"type":"ordinal","name":"series","range":"width"}]}],"height":300,"axes":[{"type":"x","title":"Primary plastic production by industrial sector 2015","scale":"x","properties":{"title":{"fill":{"value":"#54595d"}},"grid":{"stroke":{"value":"#54595d"}},"ticks":{"stroke":{"value":"#54595d"}},"axis":{"strokeWidth":{"value":2},"stroke":{"value":"#54595d"}},"labels":{"align":{"value":"left"},"angle":{"value":30},"fill":{"value":"#54595d"}}},"grid":false},{"type":"y","title":"Million metric tonnes","scale":"y","format":"d","properties":{"title":{"fill":{"value":"#54595d"}},"grid":{"stroke":{"value":"#54595d"}},"ticks":{"stroke":{"value":"#54595d"}},"axis":{"strokeWidth":{"value":2},"stroke":{"value":"#54595d"}},"labels":{"fill":{"value":"#54595d"}}},"grid":false}],"data":[{"format":{"parse":{"y":"integer","x":"string"},"type":"json"},"name":"chart","values":[{"y":146,"series":"y1","x":"Packaging"},{"y":65,"series":"y2","x":"Construction"},{"y":59,"series":"y3","x":"Other sectors"},{"y":47,"series":"y4","x":"Textiles"},{"y":42,"series":"y5","x":"Consumer products"},{"y":27,"series":"y6","x":"Transportation"},{"y":18,"series":"y7","x":"Electronics"},{"y":3,"series":"y8","x":"Industrial Machinery"}]}],"width":600}</graph>

<graph>{"legends":[],"scales":[{"domain":{"data":"chart","field":"x"},"type":"ordinal","name":"color","range":"category10"}],"version":2,"marks":[{"type":"arc","properties":{"hover":{"fill":{"value":"red"}},"update":{"fill":{"scale":"color","field":"x"}},"enter":{"endAngle":{"field":"layout_end"},"innerRadius":{"value":0},"outerRadius":{"value":110},"startAngle":{"field":"layout_start"},"stroke":{"value":"white"},"fill":{"scale":"color","field":"x"},"strokeWidth":{"value":1}}},"from":{"data":"chart","transform":[{"type":"pie","field":"y"}]}},{"type":"text","properties":{"enter":{"theta":{"field":"layout_mid"},"baseline":{"value":"bottom"},"align":{"value":"center"},"text":{"template":"{{datum.y|number:'.0%'}}"},"y":{"group":"height","mult":0.5},"x":{"group":"width","mult":0.5},"fontSize":{"value":11},"angle":{"mult":57.29577951308232,"field":"layout_mid"},"radius":{"offset":6,"value":110},"fill":{"value":"#54595d"}}},"from":{"data":"chart","transform":[{"field":"y","type":"pie"}]}}],"height":110,"axes":[],"data":[{"format":{"parse":{"y":"number","x":"string"},"type":"json"},"name":"chart","values":[{"y":0.358722359,"x":"Packaging"},{"y":0.15970516,"x":"Construction"},{"y":0.144963145,"x":"Other sectors"},{"y":0.115479115,"x":"Textiles"},{"y":0.103194103,"x":"Consumer products"},{"y":0.066339066,"x":"Transportation"},{"y":0.044226044,"x":"Electronics"},{"y":0.007371007,"x":"Industrial Machinery"}]}],"width":110}</graph>

## Additives

Additives are chemicals blended into plastics to improved their performance or appearance.[34][35] Additives are therefore one of the reasons why plastic is used so widely.[36] Plastics are composed of chains of polymers. Many different chemicals are used as plastic additives. A randomly chosen plastic product generally contains around 20 additives. The identities and concentrations of additives are generally not listed on products.[5]

In the EU, over 400 additives are used in high volumes.[37][5] In a global market analysis, 5,500 additives were found.[38] At a minimum, all plastic contains some polymer stabilizers which permit them to be melt-processed (molded) without suffering polymer degradation.Additives in polyvinyl chloride (PVC), used widely for sanitary plumbing, can constitute up to 80% of the total volume.[5] Unadulterated plastic (barefoot resin) is rarely sold.[citation needed]

### Leaching

Additives may be weakly bound to the polymers or react in the polymer matrix. Although additives are blended into plastic they remain chemically distinct from it and can gradually leach back out during normal use, when in landfills, or following improper disposal in the environment.[39] Additives may also degrade to form other compounds that could be more benign or more toxic. Plastic fragmentation into microplastics and nanoplastics can allow chemical additives to move in the environment far from the point of use. Once released, some additives and derivatives may persist in the environment and bioaccumulate in organisms. They can have adverse effects on human health and biota. A recent review by the United States Environmental Protection Agency (US EPA) revealed that out of 3,377 chemicals potentially associated with plastic packaging and 906 likely associated with it, 68 were ranked by ECHA as "highest for human health hazards" and 68 as "highest for environmental hazards".[5]

### Recycling

Main article: Physics:Plastic recycling

As additives change the properties of plastics they have to be considered during recycling. Presently, almost all recycling is performed by simply remelting and fabricating used plastic into new items. Additives present risks in recycled products due to their difficulty to remove. When plastic products are recycled, it is highly likely that the additives will be integrated into the new products. Plastic waste, even if it is all of the same polymer type, will contain varying types and amounts of additives. Mixing these together can give a material with inconsistent properties, which can be unappealing to industry. For example, mixing different colored plastics with different plastic colorants together can produce a discolored or brown material and for this reason plastic is usually sorted both by polymer type and color prior to recycling.[5]

Lack of transparency and reporting across the value chain often results in lack of knowledge concerning the chemical profile of the final products. For example, products containing brominated flame retardants have been incorporated into new plastic products. Flame retardants are a group of chemicals used in electronic and electrical equipment, textiles, furniture and construction materials which should not be present in food packaging or child care products. A recent study found brominated dioxins as unintentional contaminants in toys made from recycled plastic electronic waste that contained brominated flame retardants. Brominated dioxins have been found to exhibit toxicity similar to that of chlorinated dioxins. They can have negative developmental effects and negative effects on the nervous system and interfere with mechanisms of the endocrine system.[5]

### Health effects

Plastics have proliferated in part because they are relatively benign. They are not acutely toxic, in large part because they are insoluble and or indigestible owing to their large molecular weight. Their degradation products also are rarely toxic. The same cannot be said about some additives, which tend to be lower molecular weight.

Controversies associated with plastics often relate to their additives, some of which are potentially harmful.[40][41][34] For example, some flame retardants, such as octabromodiphenyl ether and pentabromodiphenyl ether, are unsuitable for food packaging. Other harmful additives include cadmium, chromium, lead and mercury (regulated under the Minamata Convention on Mercury), which have previously been used in plastic production, are banned in many jurisdictions. However, they are still routinely found in some plastic packaging, including for food.[citation needed]

#### Poor countries

Additives can also be problematic if waste is burned, especially when burning is uncontrolled or takes place in low-technology incinerators, as is common in many developing countries. Incomplete combustion can cause emissions of hazardous substances such as acid gases and ash, which can contain persistent organic pollutants (POPs) such as dioxins.[5]

A number of additives identified as hazardous to humans and/or the environment are regulated internationally. The Stockholm Convention on Persistent Organic Pollutants is a global treaty to protect human health and the environment from chemicals that remain intact in the environment for long periods, become widely distributed geographically, accumulate in the fatty tissue of humans and wildlife, and have harmful impacts on human health or on the environment.[5] The use of bisphenol A (BPA) in plastic baby bottles is banned in many parts of the world but is not restricted in some low-income countries.[5]

#### Animals

In 2023, plasticosis, a new disease caused by the ingestion of plastic waste, was discovered in seabirds. Birds affected with this disease were found to have scarred and inflamed digestive tracts, which can impair their ability to digest food.[42] "When birds ingest small pieces of plastic, they found, it inflames the digestive tract. Over time, the persistent inflammation causes tissues to become scarred and disfigured, affecting digestion, growth and survival."[43]

### Types of additive

Additive type | Typical concentration when present (%)[34] | Description | Example compounds | Comment | Share of global additive production (by weight)[17]

|
|
|
|
|

Plasticizers | 10–70 | Plastics can be brittle, adding some plasticizer makes them more durable, adding lots makes them flexible | Phthalates are the dominant class, safer alternatives include adipate esters (DEHA, DOA) and citrate esters (ATBC and TEC) | 80–90% of world production is used in PVC, much of the rest is used in cellulose acetate. For most products loadings are between 10 and 35%, high loadings are used for plastisols | 34%
Flame retardants | 1–30 | Being petrochemicals, most plastics burn readily, flame retardants can prevent this | Brominated flame retardants, chlorinated paraffins | Non-chlorinated organophosphates are ecologically safer, though often less efficient | 13%
Heat stabilizers | 0.3-5 | Prevents heat related degradation | Traditionally derivatives of lead, cadmium & tin. Safer modern alternatives include barium/zinc mixtures and calcium stearate, along with various synergists | Almost exclusively used in PVC. | 5%
Fillers | 0–50 | Bulking agents. Can change appearance and mechanical properties, can lower price | Calcium carbonate "chalk", talc, glass beads, carbon black. Also reinforcing fillers like carbon-fiber | Most opaque plastic contains fillers. High levels can also protect against UV rays. | 28%
Impact modifiers | 10–40 | Improved toughness and resistance to damage[44] | Typically some other elastomeric polymer, e.g. rubbers, styrene copolymers | Chlorinated polyethylene is used for PVC | 5%
Antioxidants | 0.05–3 | Protects against degradation during processing | Phenols, phosphite esters, certain thioethers | The most widely used type of additives, all plastics will contain polymer stabilizers of some sort | 6%
Colorants | 0.001-10 | Imparts color | Numerous dyes or pigments |  | 2%
Lubricants | 0.1-3 | Assist in forming/molding the plastic, includes processing aids (or flow aids), release agents, slip additives | Hazardous PFASs. Paraffin wax, wax esters, metal stearates (i.e. zinc stearate), long-chain fatty acid amides (oleamide, erucamide) | Very common. All examples form a coating between the plastic and machine parts during production. Reduces pressure and power usage in the extruder. Reduces imperfections. | 2%
Light stabilizers | 0.05–3 | Protects against UV damage | HALS, UV blockers and quenchers | Normally only used for items intended for outdoor use | 1%
Other |  | Various | Antimicrobials, antistatics, blowing agents, nucleating agents, clarifying agents |  | 4%

## Health effects

Plastics per se have low toxicity due to their insolubility in water and because they have a large molecular weight. They are biochemically inert. Additives in plastic products can be more problematic.[45] For example, plasticizers like adipates and phthalates are often added to brittle plastics like PVC to make them pliable. Traces of these compounds can leach out of the product. Owing to concerns over the effects of such leachates, the EU has restricted the use of DEHP (di-2-ethylhexyl phthalate) and other phthalates in some applications, and the US has limited the use of DEHP, DPB, BBP, DINP, DIDP, and DnOP in children's toys and child-care articles through the Consumer Product Safety Improvement Act. Some compounds leaching from polystyrene food containers have been proposed to interfere with hormone functions and are suspected human carcinogens (cancer-causing substances).[46] Other chemicals of potential concern include alkylphenols.[41]

While a finished plastic may be non-toxic, the monomers used in the manufacture of its parent polymers may be toxic. In some cases, small amounts of those chemicals can remain trapped in the product unless suitable processing is employed. For example, the World Health Organization's International Agency for Research on Cancer (IARC) has recognized vinyl chloride, the precursor to PVC, as a human carcinogen.[46]

### Bisphenol A (BPA)

See also: Chemistry:Health effects of Bisphenol A

Some plastic products degrade to chemicals with estrogenic activity.[47] The primary building block of polycarbonates, bisphenol A (BPA), is an estrogen-like endocrine disruptor that may leach into food.[46] Research in Environmental Health Perspectives finds that BPA leached from the lining of tin cans, dental sealants and polycarbonate bottles can increase the body weight of lab animals' offspring.[48] A more recent animal study suggests that even low-level exposure to BPA results in insulin resistance, which can lead to inflammation and heart disease.[49] As of January 2010, the Los Angeles Times reported that the US Food and Drug Administration (FDA) is spending $30 million to investigate indications of BPA's link to cancer.[50] Bis(2-ethylhexyl) adipate, present in plastic wrap based on PVC, is also of concern, as are the volatile organic compounds present in new car smell. The EU has a permanent ban on the use of phthalates in toys. In 2009, the US government banned certain types of phthalates commonly used in plastic.[51]

## Environmental effects

Because the chemical structure of most plastics renders them durable, they are resistant to many natural degradation processes. Much of this material may persist for centuries or longer, given the demonstrated persistence of structurally similar natural materials such as amber.[clarification needed]

Estimates differ as to the amount of plastic waste produced in the last century. By one estimate, one billion tons of plastic waste have been discarded since the 1950s.[52] Others estimate a cumulative human production of 8.3-billion tons of plastic, of which 6.3-billion tons is waste, with only 9% getting recycled.[53]

It is estimated that this waste is made up of 81% polymer resin, 13% polymer fibers and 32% additives. In 2018 more than 343 million tons of plastic waste were generated, 90% of which was composed of post-consumer plastic waste (industrial, agricultural, commercial and municipal plastic waste). The rest was pre-consumer waste from resin production and manufacturing of plastic products (e.g. materials rejected due to unsuitable color, hardness, or processing characteristics).[5]

The Ocean Conservancy reported that China, Indonesia, Philippines, Thailand, and Vietnam dump more plastic into the sea than all other countries combined.[54] The rivers Yangtze, Indus, Yellow, Hai, Nile, Ganges, Pearl, Amur, Niger, and Mekong "transport 88% to 95% of the global [plastics] load into the sea."[55][56][verify quote punctuation]

The presence of plastics, particularly microplastics, within the food chain is increasing. In the 1960s microplastics were observed in the guts of seabirds, and since then have been found in increasing concentrations.[57] The long-term effects of plastics in the food chain are poorly understood. In 2009 it was estimated that 10% of modern waste was plastic,[58] although estimates vary according to region.[57] Meanwhile, 50% to 80% of debris in marine areas is plastic.[57] Plastic is often used in agriculture. There is more plastic in the soil than in the oceans. The presence of plastic in the environment hurts ecosystems and human health.[59]

Research on the environmental impacts has typically focused on the disposal phase. However, the production of plastics is also responsible for substantial environmental, health and socioeconomic impacts.[60]

Prior to the Montreal Protocol, CFCs had been commonly used in the manufacture of the plastic polystyrene, the production of which had contributed to depletion of the ozone layer.

Efforts to minimize environmental impact of plastics may include lowering of plastics production and use, waste- and recycling-policies, and the proactive development and deployment of alternatives to plastics such as for sustainable packaging.[citation needed]

### Microplastics

This section is an excerpt from Microplastics[ edit ]

### Decomposition of plastics

Main article: Chemistry:Polymer degradation

Plastics degrade by a variety of processes, the most significant of which is usually photo-oxidation. Their chemical structure determines their fate. Polymers' marine degradation takes much longer as a result of the saline environment and cooling effect of the sea, contributing to the persistence of plastic debris in certain environments.[57] Recent studies have shown, however, that plastics in the ocean decompose faster than had been previously thought, due to exposure to the sun, rain, and other environmental conditions, resulting in the release of toxic chemicals such as bisphenol A. However, due to the increased volume of plastics in the ocean, decomposition has slowed down.[61] The Marine Conservancy has predicted the decomposition rates of several plastic products: It is estimated that a foam plastic cup will take 50 years, a plastic beverage holder will take 400 years, a disposable diaper will take 450 years, and fishing line will take 600 years to degrade.[62]

Microbial species capable of degrading plastics are known to science, some of which are potentially useful for disposal of certain classes of plastic waste.

* In 1975, a team of Japanese scientists studying ponds containing waste water from a nylon factory discovered a strain of Flavobacterium that digests certain byproducts of nylon 6 manufacture, such as the linear dimer of 6-aminohexanoate.[63] Nylon 4 (polybutyrolactam) can be degraded by the ND-10 and ND-11 strands of Pseudomonas sp. found in sludge, resulting in GABA (γ-aminobutyric acid) as a byproduct.[64]
* Several species of soil fungi can consume polyurethane,[65] including two species of the Ecuadorian fungus Pestalotiopsis. They can consume polyurethane both aerobically and anaerobically (such as at the bottom of landfills).[66]
* Methanogenic microbial consortia degrade styrene, using it as a carbon source.[67] Pseudomonas putida can convert styrene oil into various biodegradable plastic|biodegradable polyhydroxyalkanoates.[68][69]
* Microbial communities isolated from soil samples mixed with starch have been shown to be capable of degrading polypropylene.[70]
* The fungus Aspergillus fumigatus effectively degrades plasticized PVC.[71]: 45–46 Phanerochaete chrysosporium has been grown on PVC in a mineral salt agar.[71]: 76 P. chrysosporium, Lentinus tigrinus, A. niger, and A. sydowii can also effectively degrade PVC.[71]: 122
* Phenol-formaldehyde, commonly known as Bakelite, is degraded by the white rot fungus P. chrysosporium.[72]
* Acinetobacter has been found to partially degrade low-molecular-weight polyethylene oligomers.[64] When used in combination, Pseudomonas fluorescens and Sphingomonas can degrade over 40% of the weight of plastic bags in less than three months.[73] The thermophilic bacterium Brevibacillus borstelensis (strain 707) was isolated from a soil sample and found capable of using low-density polyethylene as a sole carbon source when incubated at 50 °C. Pre-exposure of the plastic to ultraviolet radiation broke chemical bonds and aided biodegradation; the longer the period of UV exposure, the greater the promotion of the degradation.[74]
* Hazardous molds have been found aboard space stations that degrade rubber into a digestible form.[75]
* Several species of yeasts, bacteria, algae and lichens have been found growing on synthetic polymer artifacts in museums and at archaeological sites.[76]
* In the plastic-polluted waters of the Sargasso Sea, bacteria have been found that consume various types of plastic; however, it is unknown to what extent these bacteria effectively clean up poisons rather than simply release them into the marine microbial ecosystem.
* Plastic-eating microbes also have been found in landfills.[77]
* Nocardia can degrade PET with an esterase enzyme.[78]
* The fungus Geotrichum candidum, found in Belize, has been found to consume the polycarbonate plastic found in CDs.[79][80]
* Futuro houses are made of fiberglass-reinforced polyesters, polyester-polyurethane, and PMMA. One such house was found to be harmfully degraded by Cyanobacteria and Archaea.[81][82]

Manual material triage for recycling

### Recycling

This section is an excerpt from Plastic recycling[ edit ]

#### Pyrolysis

By heating to above 500 °C (932 °F) in the absence of oxygen (pyrolysis), plastics can be broken down into simpler hydrocarbons, which can be used as feedstocks for the fabrication of new plastics.[83] These hydrocarbons can also be used as fuels.[84]

### Greenhouse gas emissions

According to the Organisation for Economic Co-operation and Development, plastic contributed greenhouse gases in the equivalent of 1.8 billion tons of carbon dioxide (CO
2) to the atmosphere in 2019, 3.4% of global emissions.[85] They say that by 2060, plastic could emit 4.3 billion tons of greenhouse gas a year. The effect of plastics on global warming is mixed. Plastics are generally made from fossil gas or petroleum; thus, the production of plastics creates further fugitive emissions of methane when the fossil gas or petroleum is produced. Additionally, much of the energy used in plastic production is not sustainable energy; for example, high temperature from burning fossil gas. However, plastics can also limit methane emissions; for example, packaging to reduce food waste.[86]

A study from 2024 found that compared to glass and aluminum, plastic may actually have less of a negative effect on the environment and therefore might be the best option for must food packaging and other common uses.[87] The study found that, "replacing plastics with alternatives is worse for greenhouse gas emissions in most cases." and that the study involving European researchers found, "15 of the 16 applications a plastic product incurs fewer greenhouse gas emissions than their alternatives."[87]

#### Reducing plastic production as a climate solution

In 2025, for the first time in history almost every country discussed not about just recycling but about reducing plastic production. This can be considered as indispensable part of the solution to the problem of climate change because plastic is responsible for 3-5% of emissions according to the United Nations and the US Lawrence Berkeley National Laboratory and this can triple by 2060 One of the reasons is that burning of plastics releases black carbon, which has a global warming potential of up to 5,000 times greater than CO2.[88]

### Production of plastics

Production of plastics from crude oil requires 7.9 to 13.7 kWh/lb (taking into account the average efficiency of US utility stations of 35%). Producing silicon and semiconductors for modern electronic equipment is even more energy consuming: 29.2 to 29.8 kWh/lb for silicon, and about 381 kWh/lb for semiconductors.[89] This is much higher than the energy needed to produce many other materials. For example, to produce iron (from iron ore) requires 2.5-3.2 kWh/lb of energy; glass (from sand, etc.) 2.3–4.4 kWh/lb; steel (from iron) 2.5–6.4 kWh/lb; and paper (from timber) 3.2–6.4 kWh/lb.[90]

### Incineration of plastics

Quickly burning plastics at very high temperatures breaks down many toxic components, such as dioxins and furans. This approach is widely used in municipal solid waste incineration. Municipal solid waste incinerators also normally treat the flue gas to decrease pollutants further, which is needed because uncontrolled incineration of plastic produces carcinogenic polychlorinated dibenzo-p-dioxins.[91] Open-air burning of plastic occurs at lower temperatures and normally releases such toxic fumes.

In the European Union, municipal waste incineration is regulated by the Industrial Emissions Directive,[92] which stipulates a minimum temperature of 850 °C for at least two seconds.[93]

### Facilitation of natural degradation

The bacterium Blaptica dubia is claimed to help degradation of commercial polysterene. This biodegradation seems to occur in some plastic degrading bacteria inhabiting the gut of cockroaches. The biodegradation products have been found in their feces too.[94]

## History

For a chronological guide to this subject, see Timeline of plastic development.

The development of plastics has evolved from the use of naturally plastic materials (e.g., gums and shellac) to the use of the chemical modification of those materials (e.g., natural rubber, cellulose, collagen, and milk proteins), and finally to completely synthetic plastics (e.g., bakelite, epoxy, and PVC). Early plastics were bio-derived materials such as egg and blood proteins, which are organic polymers. In around 1600 BC, Mesoamericans used natural rubber for balls, bands, and figurines.[6] Treated cattle horns were used as windows for lanterns in the Middle Ages.[citation needed] Materials that mimicked the properties of horns were developed by treating milk proteins with lye. In the nineteenth century, as chemistry developed during the Industrial Revolution, many materials were reported. The development of plastics accelerated with Charles Goodyear's 1839 discovery of vulcanization to harden natural rubber.

Plaque commemorating Parkes at the Birmingham Science Museum

Parkesine, invented by Alexander Parkes in 1855 and patented the following year,[95] is considered the first man-made plastic. It was manufactured from cellulose (the major component of plant cell walls) treated with nitric acid as a solvent. The output of the process (commonly known as cellulose nitrate or pyroxilin) could be dissolved in alcohol and hardened into a transparent and elastic material that could be molded when heated.[96] By incorporating pigments into the product, it could be made to resemble ivory. Parkesine was unveiled at the 1862 International Exhibition in London and garnered for Parkes the bronze medal.[97]

In 1893, French chemist Auguste Trillat discovered the means to insolubilize casein (milk proteins) by immersion in formaldehyde, producing material marketed as galalith.[98] In 1897, mass-printing press owner Wilhelm Krische of Hanover, Germany, was commissioned to develop an alternative to blackboards.[98] The resultant horn-like plastic made from casein was developed in cooperation with the Austrian chemist (Friedrich) Adolph Spitteler (1846–1940). Although unsuitable for the intended purpose, other uses would be discovered.[98]

The world's first fully synthetic plastic was Bakelite, invented in New York in 1907 by Leo Baekeland,[7] who coined the term plastics.[8] Many chemists have contributed to the materials science of plastics, including Nobel laureate Hermann Staudinger, who has been called "the father of polymer chemistry", and Herman Mark, known as "the father of polymer physics".[9] After World War I, improvements in chemistry led to an explosion of new forms of plastics, with mass production beginning in the 1940s and 1950s.[58] Among the earliest examples in the wave of new polymers were polystyrene (first produced by BASF in the 1930s)[6] and polyvinyl chloride (first created in 1872 but commercially produced in the late 1920s).[6] In 1923, Durite Plastics, Inc., was the first manufacturer of phenol-furfural resins.[99] In 1933, polyethylene was discovered by Imperial Chemical Industries (ICI) researchers Reginald Gibson and Eric Fawcett.[6]

The discovery of polyethylene terephthalate (PETE) is credited to employees of the Calico Printers' Association in the UK in 1941; it was licensed to DuPont for the US and ICI otherwise, and as one of the few plastics appropriate as a replacement for glass in many circumstances, resulting in widespread use for bottles in Europe.[6] In 1954 polypropylene was discovered by Giulio Natta and began to be manufactured in 1957.[6] Also in 1954 expanded polystyrene (used for building insulation, packaging, and cups) was invented by Dow Chemical.[6] Since the 1960s, plastic production has surged with the advent of polycarbonate and HDPE, widely used in various products.[100] In the 1980s and 1990s, plastic recycling and the development of biodegradable plastics began to flourish to mitigate environmental impacts.[101][102] From 2000 to the present, bioplastics from renewable sources and awareness of microplastics have spurred extensive research and policies to control plastic pollution.[103]

## Policy

Work is currently underway to develop a global treaty on plastic pollution. On March 2, 2022, UN Member States voted at the resumed fifth UN Environment Assembly (UNEA-5.2) to establish an Intergovernmental Negotiating Committee (INC) with the mandate of advancing a legally-binding international agreement on plastics.[104] The resolution is entitled "End plastic pollution: Towards an international legally binding instrument." The mandate specifies that the INC must begin its work by the end of 2022 with the goal of "completing a draft global legally binding agreement by the end of 2024."[105]

## See also

* American Recyclable Plastic Bag Alliance
* Corn construction
* Light activated resin
* Organic light emitting diode
* Plastic film
* Plastic pollution
* Plastics engineering
* Plasticulture
* Plastisphere
* Refill (scheme)
* Roll-to-roll processing
* Self-healing plastic
* Thermal cleaning
* Thermoforming
* Timeline of materials technology

Plastic in the sense of malleable

* Plastic arts
* Plastic ratio - Number, approximately 1.3247

## References

1. ↑ 1.0 1.1 Elias, Hans-Georg; Mülhaupt, Rolf (2015). "Plastics, General Survey, 1. Definition, Molecular Structure and Properties". Ullmann's Encyclopedia of Industrial Chemistry. pp. 1–70. doi:10.1002/14356007.a20_543.pub2. ISBN 978-3-527-30673-2.
2. ↑ "Life Cycle of a Plastic Product" (in en). http://www.americanchemistry.com/s_plastics/doc.asp?CID=1571&DID=5972.
3. ↑ 3.0 3.1 "Global plastic production with projections, 1950 to 2060" (in en). 2023-04-13. https://ourworldindata.org/grapher/global-plastic-production-projections?form=MG0AV3.
4. ↑ "The environmental impacts of plastics and micro-plastics use, waste and pollution: EU and national measures". October 2020. https://www.europarl.europa.eu/RegData/etudes/STUD/2020/658279/IPOL_STU(2020)658279_EN.pdf.
5. ↑ 5.00 5.01 5.02 5.03 5.04 5.05 5.06 5.07 5.08 5.09 5.10 5.11 5.12 5.13 5.14 5.15 5.16 5.17 Environment, U. N. (October 21, 2021). "Drowning in Plastics – Marine Litter and Plastic Waste Vital Graphics" (in en). http://www.unep.org/resources/report/drowning-plastics-marine-litter-and-plastic-waste-vital-graphics.
6. ↑ 6.00 6.01 6.02 6.03 6.04 6.05 6.06 6.07 6.08 6.09 6.10 "Applications and societal benefits of plastics". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences 364 (1526): 1977–84. July 2009. doi:10.1098/rstb.2008.0304. PMID 19528050.
7. ↑ 7.0 7.1 American Chemical Society National Historic Chemical Landmarks. "Bakelite: The World's First Synthetic Plastic". http://www.acs.org/content/acs/en/education/whatischemistry/landmarks/bakelite.html.
8. ↑ 8.0 8.1 Fantastic Recycled Plastic: 30 Clever Creations to Spark Your Imagination. Sterling Publishing Company, Inc.. 2009. ISBN 978-1-60059-342-0. https://books.google.com/books?id=_9WGar3yxsAC&q=Baekeland+coined&pg=PA11.
9. ↑ 9.0 9.1 Polymer Chemistry: Introduction to an Indispensable Science. NSTA Press. 2004. ISBN 978-0-87355-221-9. https://books.google.com/books?id=0qFQ5OuKoy8C&q="father+of+polymer"&pg=PA58.
10. ↑ "Plastikos". https://www.perseus.tufts.edu/cgi-bin/ptext?doc=Perseus:text:1999.04.0057:entry=#83506.
11. ↑ "Plastic". https://www.etymonline.com/search?q=plastic.
12. ↑ (in en) General Chemistry. Cengage Learning. 2016. ISBN 978-1-305-88729-9. https://books.google.com/books?id=BnccCgAAQBAJ&q=most+plastics+contain+organic+compounds&pg=PA52.
13. ↑ "Classification of Plastics" (in en). http://dwb.unl.edu/Teacher/NSF/C06/C06Links/qlink.queensu.ca/~6jrt/chem210/Page3.html.
14. ↑ "Periodic Table of Polymers" (in en). http://www.pcn.org/Technical Notes - Periodic Table of Polymers.htm.
15. ↑ "Composition and Types of Plastic" (in en). http://www.infoplease.com/ce6/sci/A0860420.html.
16. ↑ (in en) Area Array Packaging Processes: For BGA, Flip Chip, and CSP. McGraw Hill Professional. 2004. ISBN 978-0-07-142829-3. https://books.google.com/books?id=k_2qLoLA_tgC&q= Thermosets,+or+thermosetting+polymers,+can+melt+and+take+shape+only+once.
17. ↑ 17.0 17.1 17.2 17.3 17.4 Geyer, Roland; Jambeck, Jenna R.; Law, Kara Lavender (July 2017). "Production, use, and fate of all plastics ever made". Science Advances 3 (7). doi:10.1126/sciadv.1700782. PMID 28776036. Bibcode: 2017SciA....3E0782G.
18. ↑ The majority of polyurethanes are thermosets, however some thermoplastics are also produced, for instance spandex
19. ↑ PP&A stand for polyester, polyamide and acrylate polymers; all of which are used to make synthetic fibers. Care should be taken not to confuse it with polyphthalamide (PPA)
20. ↑ "Plastic Recycling Factsheet". EuRIC - European Recycling Industries' Confederation. https://circulareconomy.europa.eu/platform/sites/default/files/euric_-_plastic_recycling_fact_sheet.pdf.
21. ↑ "Polymers in aerospace applications". Euroshore. https://www.euroshore.com.my/about/industries/aerospace-plastics/.
22. ↑ (in en) Handbook of Materials Selection. John Wiley & Sons. 2002. ISBN 978-0-471-35924-1. https://books.google.com/books?id=gWg-rchM700C&q=many+plastics+completely+amorphous&pg=PA336.
23. ↑ "Solitons in Conducting Polymers". Reviews of Modern Physics 60 (3): 781–850. 1988. doi:10.1103/RevModPhys.60.781. Bibcode: 1988RvMP...60..781H.
24. ↑ "Properties of Copper" (in en). https://copperalliance.org.uk/about-copper/copper-alloys/properties-copper/.
25. ↑ "Biodegradation Biodegradation of Plastic Bottles Made from 'Biopol' in an Aquatic Ecosystem Under In Situ Conditions". Biodegradation 2 (4): 237–43. 1992. doi:10.1007/BF00114555.
26. ↑ "Biochemical Opportunities in the UK, NNFCC 08-008 — NNFCC". http://www.nnfcc.co.uk/tools/biochemical-opportunities-in-the-uk-nnfcc-08-008.
27. ↑ "Bioplastics industry shows dynamic growth". Packaging Europe. December 5, 2019. https://packagingeurope.com/bioplastics-growth-report/#:~:text=Packaging remains the largest field,total bioplastics market in 2019.&text=According to the report, global,2.4 million tonnes in 2024..
28. ↑ "Becoming Employed in a Growing Bioplastics Industry - bioplastics MAGAZINE". https://www.bioplasticsmagazine.com/en/news/meldungen/20181130-becoming-employed.php.
29. ↑ "Global Market Trends and Investments in Polyethylene and Polyproplyene". ICIS Whitepaper (Reed business Information, Inc.). November 2016. https://www.icis.com/globalassets/documents/forms/ppf-pdf/global_trends_whitepaper_pp_pe.pdf.
30. ↑ "Top 100 Producers: The Minderoo Foundation". https://www.minderoo.org/plastic-waste-makers-index/data/indices/producers/.
31. ↑ 31.0 31.1 "Plastics – the Facts 2020". https://www.plasticseurope.org/application/files/5716/0752/4286/AF_Plastics_the_facts-WEB-2020-ING_FINAL.pdf.
32. ↑ "Sustainable packaging materials for snacks". October 28, 2021. https://www.bakeryandsnacks.com/Article/2013/06/06/Sustainable-packaging-materials-for-snacks.
33. ↑ Paschotta, Dr Rüdiger. "plastic optics" (in en). https://www.rp-photonics.com/plastic_optics.html.
34. ↑ 34.0 34.1 34.2 "An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling". Journal of Hazardous Materials 344: 179–199. February 2018. doi:10.1016/j.jhazmat.2017.10.014. PMID 29035713. Bibcode: 2018JHzM..344..179H.
35. ↑ Marturano, Valentina; Cerruti, Pierfrancesco; Ambrogi, Veronica (June 27, 2017). "Polymer additives". Physical Sciences Reviews 2 (6): 130. doi:10.1515/psr-2016-0130. Bibcode: 2017PhSRv...2..130M.
36. ↑ Pfaendner, Rudolf (September 2006). "How will additives shape the future of plastics?". Polymer Degradation and Stability 91 (9): 2249–2256. doi:10.1016/j.polymdegradstab.2005.10.017.
37. ↑ "Mapping exercise – Plastic additives initiative - ECHA". https://echa.europa.eu/mapping-exercise-plastic-additives-initiative.
38. ↑ Wiesinger, Helene; Wang, Zhanyun; Hellweg, Stefanie (July 6, 2021). "Deep Dive into Plastic Monomers, Additives, and Processing Aids". Environmental Science & Technology 55 (13): 9339–9351. doi:10.1021/acs.est.1c00976. PMID 34154322. Bibcode: 2021EnST...55.9339W.
39. ↑ "Emission Scenario Documents: N°3 Plastic Additives (2004, revised in 2009)". Organisation for Economic Co-operation and Development. https://www.oecd.org/officialdocuments/publicdisplaydocumentpdf/?cote=env/jm/mono(2004)8/rev1&doclanguage=en.
40. ↑ Elias, Hans-Georg; Mülhaupt, Rolf (April 14, 2015). "Plastics, General Survey, 1. Definition, Molecular Structure and Properties". Ullmann's Encyclopedia of Industrial Chemistry: 1–70. doi:10.1002/14356007.a20_543.pub2. ISBN 978-3-527-30673-2.
41. ↑ 41.0 41.1 "Transport and release of chemicals from plastics to the environment and to wildlife". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences 364 (1526): 2027–45. July 2009. doi:10.1098/rstb.2008.0284. PMID 19528054.
42. ↑ "New disease caused by plastics discovered in seabirds". The Guardian. March 3, 2023. https://www.theguardian.com/environment/2023/mar/03/plasticosis-new-disease-caused-by-plastics-discovered-in-seabirds.
43. ↑ "New disease caused solely by plastics discovered in seabirds". Natural History Museum. March 3, 2023. https://www.nhm.ac.uk/press-office/press-releases/new-disease-caused-solely-by-plastics-discovered-in-seabirds-.html.
44. ↑ "Impact modifiers: how to make your compound tougher". Plastics, Additives and Compounding 6 (3): 46–49. May 2004. doi:10.1016/S1464-391X(04)00203-X.
45. ↑ "An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling". Journal of Hazardous Materials 344: 179–199. February 2018. doi:10.1016/j.jhazmat.2017.10.014. PMID 29035713. Bibcode: 2018JHzM..344..179H.
46. ↑ 46.0 46.1 46.2 "Plastic Water Bottles". National Geographic. March–April 2004. http://www.thegreenguide.com/doc/101/plastic.
47. ↑ "Most plastic products release estrogenic chemicals: a potential health problem that can be solved". Environmental Health Perspectives 119 (7): 989–96. July 2011. doi:10.1289/ehp.1003220. PMID 21367689. Bibcode: 2011EnvHP.119..989Y.
48. ↑ "Perinatal exposure to low doses of bisphenol A affects body weight, patterns of estrous cyclicity, and plasma LH levels". Environmental Health Perspectives 109 (7): 675–80. July 2001. doi:10.2307/3454783. PMID 11485865.
49. ↑ "The estrogenic effect of bisphenol A disrupts pancreatic beta-cell function in vivo and induces insulin resistance". Environmental Health Perspectives 114 (1): 106–12. January 2006. doi:10.1289/ehp.8451. PMID 16393666. PMC 1332664. Bibcode: 2006EnvHP.114..106A. http://www.ehponline.org/docs/2005/8451/abstract.html.
50. ↑ "FDA Issues BPA Guidelines" (in en). Los Angeles Times. January 16, 2010. https://www.latimes.com/archives/la-xpm-2010-jan-16-la-na-fda-bpa16-2010jan16-story.html.
51. ↑ "More Kids' Products Found Containing Unsafe Chemicals". ConsumerAffairs.com. October 30, 2009. http://www.consumeraffairs.com/news04/2009/10/pirg_lead_tests.html.
52. ↑ The world without us. New York: Thomas Dunne Books/St. Martin's Press. 2007. ISBN 978-1-4434-0008-4.
53. ↑ "Production, use, and fate of all plastics ever made". Science Advances 3 (7). July 2017. doi:10.1126/sciadv.1700782. PMID 28776036. Bibcode: 2017SciA....3E0782G.
54. ↑ "Five Asian Countries Dump More Plastic Into Oceans Than Anyone Else Combined: How You Can Help" (in en). Forbes. April 21, 2018. https://www.forbes.com/sites/hannahleung/2018/04/21/five-asian-countries-dump-more-plastic-than-anyone-else-combined-how-you-can-help/#1d663de71234. "China, Indonesia, the Philippines, Thailand, and Vietnam are dumping more plastic into oceans than the rest of the world combined, according to a 2017 report by Ocean Conservancy"
55. ↑ "Export of Plastic Debris by Rivers into the Sea". Environmental Science & Technology 51 (21): 12246–12253. November 2017. doi:10.1021/acs.est.7b02368. PMID 29019247. Bibcode: 2017EnST...5112246S. http://oceanrep.geomar.de/43169/4/es7b02368_si_001.pdf. "The 10 top-ranked rivers transport 88–95% of the global load into the sea".
56. ↑ "Almost all plastic in the ocean comes from just 10 rivers". Deutsche Welle. November 30, 2017. https://p.dw.com/p/2oTF6. "It turns out that about 90 percent of all the plastic that reaches the world's oceans gets flushed through just 10 rivers: The Yangtze, the Indus, Yellow River, Hai River, the Nile, the Ganges, Pearl River, Amur River, the Niger, and the Mekong (in that order)."
57. ↑ 57.0 57.1 57.2 57.3 "Accumulation and fragmentation of plastic debris in global environments". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences 364 (1526): 1985–98. July 2009. doi:10.1098/rstb.2008.0205. PMID 19528051.
58. ↑ 58.0 58.1 "Our plastic age". Philosophical Transactions of the Royal Society of London. Series B, Biological Sciences 364 (1526): 1973–6. July 2009. doi:10.1098/rstb.2009.0054. PMID 19528049.
59. ↑ Carrington, Damian (December 7, 2021). "'Disastrous' plastic use in farming threatens food safety – UN". The Guardian. https://www.theguardian.com/environment/2021/dec/07/disastrous-plastic-use-in-farming-threatens-food-safety-un.
60. ↑ Cabernard, Livia; Pfister, Stephan; Oberschelp, Christopher; Hellweg, Stefanie (December 2, 2021). "Growing environmental footprint of plastics driven by coal combustion" (in en). Nature Sustainability 5 (2): 139–148. doi:10.1038/s41893-021-00807-2. ISSN 2398-9629. Bibcode: 2021NatSu...5..139C.
61. ↑ American Chemical Society. "Plastics In Oceans Decompose, Release Hazardous Chemicals, Surprising New Study Says". https://www.sciencedaily.com/releases/2009/08/090819234651.htm.
62. ↑ "When The Mermaids Cry: The Great Plastic Tide". March 2018. http://plastic-pollution.org/.
63. ↑ "Utilization of a Cyclic Dimer and Linear Oligomers of E-Aminocaproic Acid by Achromobacter Guttatus". Agricultural and Biological Chemistry 39 (6): 1219–1223. 1975. doi:10.1271/bbb1961.39.1219.
64. ↑ 64.0 64.1 "Biodegradability of plastics". International Journal of Molecular Sciences 10 (9): 3722–42. August 2009. doi:10.3390/ijms10093722. PMID 19865515.
65. ↑ "Biodegradation of polyester polyurethane by endophytic fungi". Applied and Environmental Microbiology 77 (17): 6076–84. September 2011. doi:10.1128/aem.00521-11. PMID 21764951. Bibcode: 2011ApEnM..77.6076R.
66. ↑ "Biodegradation of polyester polyurethane by endophytic fungi". Applied and Environmental Microbiology 77 (17): 6076–84. September 2011. doi:10.1128/AEM.00521-11. PMID 21764951. Bibcode: 2011ApEnM..77.6076R.
67. ↑ "Deep Geologic Repository Project". http://www.ceaa-acee.gc.ca/050/documents/56647/56647E.pdf.
68. ↑ "Immortal Polystyrene Foam Meets its Enemy". March 7, 2006. http://www.livescience.com/technology/060307_styrofoam_cup.html.
69. ↑ "A two step chemo-biotechnological conversion of polystyrene to a biodegradable thermoplastic". Environmental Science & Technology 40 (7): 2433–7. April 2006. doi:10.1021/es0517668. PMID 16649270. Bibcode: 2006EnST...40.2433W.
70. ↑ "Isotactic polypropylene biodegradation by a microbial community: physicochemical characterization of metabolites produced". Applied and Environmental Microbiology 59 (11): 3695–700. November 1993. doi:10.1128/AEM.59.11.3695-3700.1993. PMID 8285678. Bibcode: 1993ApEnM..59.3695C.
71. ↑ 71.0 71.1 71.2 Ishtiaq AM (2011). Microbial Degradation of Polyvinyl Chloride Plastics (PDF) (Ph.D.). Islamabad: Quaid-i-Azam University. Archived from the original (PDF) on December 24, 2013. Retrieved December 23, 2013.
72. ↑ "White-rot fungi demonstrate first biodegradation of phenolic resin". Environmental Science & Technology 40 (13): 4196–9. July 2006. doi:10.1021/es060408h. PMID 16856735. Bibcode: 2006EnST...40.4196G.
73. ↑ "CanadaWorld – WCI student isolates microbe that lunches on plastic bags". The Record.com. http://woohooreport.com/2009/09/wci-student-isolates-microbe-that-lunches-on-plastic-bags/.
74. ↑ "Biodegradation of polyethylene by the thermophilic bacterium Brevibacillus borstelensis". Journal of Applied Microbiology 98 (5): 1093–100. 2005. doi:10.1111/j.1365-2672.2005.02553.x. PMID 15836478.
75. ↑ "Preventing "Sick" Spaceships". 2007. https://science.nasa.gov/science-news/science-at-nasa/2007/11may_locad3/.
76. ↑ "Microorganisms attack synthetic polymers in items representing our cultural heritage". Applied and Environmental Microbiology 74 (3): 564–9. February 2008. doi:10.1128/AEM.01768-07. PMID 18065627. Bibcode: 2008ApEnM..74..564C.
77. ↑ "Marine Microbes Digest Plastic". Nature. March 2011. doi:10.1038/news.2011.191. http://www.nature.com/news/2011/110328/full/news.2011.191.html.
78. ↑ Sharon, Chetna; Sharon, Madhuri (2012). "Studies on Biodegradation of Polyethylene terephthalate: A synthetic polymer". Journal of Microbiology and Biotechnology Research 2 (2). https://www.researchgate.net/publication/306202944.
79. ↑ "Fungus Eats CD". Nature. 2001. doi:10.1038/news010628-11. http://www.nature.com/news/1998/010628/full/news010628-11.html.
80. ↑ "Fungus 'Eats' CDs". BBC News. June 22, 2001. http://news.bbc.co.uk/2/hi/science/nature/1402533.stm.
81. ↑ "Biodeterioration of modern materials in contemporary collections: can biotechnology help?". Trends in Biotechnology 24 (8): 350–4. August 2006. doi:10.1016/j.tibtech.2006.06.001. PMID 16782219.
82. ↑ "Saving a fragile legacy. Biotechnology and microbiology are increasingly used to preserve and restore the world's cultural heritage". EMBO Reports 7 (11): 1075–9. November 2006. doi:10.1038/sj.embor.7400844. PMID 17077862.
83. ↑ Tullo, Alexander (October 10, 2022). "Amid controversy, industry goes all in on plastics pyrolysis". https://cen.acs.org/environment/recycling/Amid-controversy-industry-goes-plastics-pyrolysis/100/i36.
84. ↑ "The Zadgaonkars turn carry-bags into petrol!". The Hindu. December 12, 2005. http://www.hindu.com/mp/2005/12/19/stories/2005121900140300.htm.
85. ↑ "Plastic leakage and greenhouse gas emissions are increasing". OECD. https://www.oecd.org/environment/plastics/increased-plastic-leakage-and-greenhouse-gas-emissions.htm.
86. ↑ "How is plastic made? Climate change is a key ingredient | Friends of the Earth" (in en). https://friendsoftheearth.uk/plastics/how-is-plastic-made.
87. ↑ 87.0 87.1 Meng, Fanran; Brandão, Miguel; Cullen, Jonathan M (2024-02-13). "Replacing Plastics with Alternatives Is Worse for Greenhouse Gas Emissions in Most Cases" (in en). Environmental Science & Technology 58 (6): 2716–2727. doi:10.1021/acs.est.3c05191. ISSN 0013-936X. PMID 38291786. Bibcode: 2024EnST...58.2716M.
88. ↑ Meech, Caroline; Singh, Sakshee. "Why solving plastic pollution is one of the biggest climate wins hiding in plain sight". https://www.weforum.org/stories/2025/09/why-solving-plastic-pollution-is-one-of-the-biggest-climate-wins-hiding-in-plain-sight/.
89. ↑ "The monster footprint of digital technology". Low-Tech Magazine. June 2009. http://www.lowtechmagazine.com/2009/06/embodied-energy-of-digital-technology.html.
90. ↑ "How much energy does it take (on average) to produce 1 kilogram of the following materials?". Low-Tech Magazine. December 26, 2014. http://www.lowtechmagazine.com/what-is-the-embodied-energy-of-materials.html.
91. ↑ "Plastics and health risks". Annual Review of Public Health 31 (1): 179–94. 2010. doi:10.1146/annurev.publhealth.012809.103714. PMID 20070188.
92. ↑ Romero, Lina M.; Lyczko, Nathalie; Nzihou, Ange; Antonini, Gérard; Moreau, Eric; Richardeau, Hubert; Coste, Christophe; Madoui, Saïd et al. (July 2020). "New insights on mercury abatement and modeling in a full-scale municipal solid waste incineration flue gas treatment unit" (in en). Waste Management 113: 270–279. doi:10.1016/j.wasman.2020.06.003. PMID 32559697. Bibcode: 2020WaMan.113..270R.
93. ↑ Janhäll, Sara; Petersson, Mikaela; Davidsson, Kent; Öman, Tommy; Sommertune, Jens; Kåredal, Monica; Messing, Maria E.; Rissler, Jenny (October 2021). "Release of carbon nanotubes during combustion of polymer nanocomposites in a pilot-scale facility for waste incineration" (in en). NanoImpact 24. doi:10.1016/j.impact.2021.100357. PMID 35559816. Bibcode: 2021NanoI..2400357J.
94. ↑ "Cockroach Blaptica dubia biodegrades polystyrene plastics: Insights for superior ability, microbiome and host genes". J Hazard Mater 479. November 5, 2024. doi:10.1016/j.jhazmat.2024.135756. PMID 39255668. Bibcode: 2024JHzM..47935756L. https://www.sciencedirect.com/science/article/pii/S0304389424023355.
95. ↑ UK Patent office (1857). Patents for inventions. UK Patent office. p. 255. https://books.google.com/books?id=0nCoU-2tAx8C&pg=PA255.
96. ↑ "Dictionary – Definition of celluloid". Websters-online-dictionary.org. http://www.websters-online-dictionary.org/ce/celluloid.html.
97. ↑ Plastic: the making of a synthetic century. New York: HarperBusiness. 1996. p. 17. ISBN 978-0-88730-732-4. https://archive.org/details/plasticmakingofs00feni.
98. ↑ 98.0 98.1 98.2 "Jewelry Stone Make of Milk". GZ Art+Design. August 2004. http://www.ganoksin.com/borisat/nenam/milk-stone.htm.
99. ↑ "Historical Overview and Industrial Development". http://www.furan.com/furfural_historical_overview.html.
100. ↑ Tratzi, Patrizio; Giuliani, Chiara; Torre, Marco; Tomassetti, Laura; Petrucci, Roberto; Iannoni, Antonio; Torre, Luigi; Genova, Salvatore et al. (2021-09-01). "Effect of Hard Plastic Waste on the Quality of Recycled Polypropylene Blends" (in en). Recycling 6 (3): 58. doi:10.3390/recycling6030058. ISSN 2313-4321.
101. ↑ Keith, Matthew; Koller, Martin; Lackner, Maximilian (2024-01-01). "Carbon Recycling of High Value Bioplastics: A Route to a Zero-Waste Future" (in en). Polymers 16 (12): 1621. doi:10.3390/polym16121621. ISSN 2073-4360. PMID 38931972.
102. ↑ "Bao bì vinpack" (in en). https://baobivinpack.com.
103. ↑ Jensen, Heidi (2019-04-01). "Now and Then: A Look Back at 30 Years of Recycling" (in en-US). https://wasteadvantagemag.com/now-and-then-a-look-back-at-30-years-of-recycling/?form=MG0AV3.
104. ↑ Geddie, John; Brock, Joe (March 2, 2022). "'Biggest green deal since Paris': UN agrees plastic treaty roadmap" (in en). Reuters. https://www.reuters.com/business/environment/biggest-green-deal-since-paris-un-agrees-plastic-treaty-roadmap-2022-03-02/.
105. ↑ "Historic day in the campaign to beat plastic pollution: Nations commit to develop a legally binding agreement" (in en). March 2, 2022. http://www.unep.org/news-and-stories/press-release/historic-day-campaign-beat-plastic-pollution-nations-commit-develop.

* Substantial parts of this text originated from An Introduction to Plastics v1.0[Usurped!] by Greg Goebel (March 1, 2001), which is in the public domain.

## Sources

* This article incorporates text from a free content work. Licensed under Cc BY-SA 3.0 IGO License statement: Drowning in Plastics – Marine Litter and Plastic Waste Vital Graphics, United Nations Environment Programme. To learn how to add open license text to HandWiki articles, please see this how-to page. For information on reusing text from HandWiki, please see the terms of use.

## Further reading

* Hopmann, Christian; Greif, Helmut; Wolters, Leo (8 December 2023). Training in Plastics Technology. Carl Hanser Verlag GmbH & Company KG. ISBN 978-1-56990-935-5.
* Fink, Johannes Karl (2024). Future Trends in Modern Plastics. Wiley. ISBN 978-1-394-23757-9.
* Li, Zibiao; Lim, Jason Y. C.; Wang, Chen-Gang (21 February 2023). Circularity of Plastics: Sustainability, Emerging Materials, and Valorization of Waste Plastic. Elsevier. ISBN 978-0-323-91435-2.

## External links

* "J. Harry Dubois Collection on the History of Plastics, ca. 1900–1975". Archives Center, National Museum of American History, Smithsonian Institution.. http://americanhistory.si.edu/archives/d8008.htm.
* "Material Properties of Plastics – Mechanical, Thermal & Electrical Properties". Plastics International. http://www.plasticsintl.com/sortable_materials.php?display=mechanical.
* "Plastics Historical Society". http://www.plastiquarian.com/.
* "History of plastics, Society of the Plastics Industry". plasticsindustry.org. http://www.plasticsindustry.org/AboutPlastics/content.cfm?ItemNumber=670&navItemNumber=1117.
* "A brief history of plastics, natural and synthetic". BBC Magazine. May 17, 2014. https://www.bbc.com/news/magazine-27442625.
* "Timeline of important milestone of plastic injection moulding and plastics". Tangram Technology Ltd. June 27, 2014. http://www.tangram.co.uk/TI-Polymer-Timeline.html.

* v
* t
* e

Plastics

Chemical types|

* Acrylonitrile butadiene styrene (ABS)
* Cross-linked polyethylene (PEX, XLPE)
* Ethylene vinyl acetate (EVA)
* Poly(methyl methacrylate) (PMMA)
* Poly(ethyl methacrylate) (PEMA)
* Polyacrylic acid (PAA)
* Polyamide (PA)
* Polybutylene (PB)
* Polybutylene terephthalate (PBT)
* Polycarbonate (PC)
* Polyetheretherketone (PEEK)
* Polyester (PEs)
* Polyethylene (PE)
* Polyethylene terephthalate (PET, PETE)
* Polyimide (PI)
* Polylactic acid (PLA)
* Polyoxymethylene (POM)
* Polyphenyl ether (PPE)
* Polypropylene (PP)
* Polystyrene (PS)
* Polysulfone (PES)
* Polytetrafluoroethylene (PTFE)
* Polyurethane (PU)
* Polyvinyl chloride (PVC)
* Polyvinylidene chloride (PVDC)
* Styrene maleic anhydride (SMA)
* Styrene-acrylonitrile (SAN)

Mechanical types|

* Thermoplastic
* Thermosetting polymer
* Duroplast
* Corrugated plastic
* Polymeric foam
* High performance plastics

Additives|

* Polymer additive
* Colorants
* Plasticizer
* Stabilizer for polymers
* Biodegradable additives
* Filler (materials)

Plastics processing|

* injection moulding
* plastics extrusion
* stretch-blow molding
* thermoforming
* compression molding
* calendering
* transfer molding
* laminating
* fiberglass molding
* pultrusion
* filament winding
* vacuum forming
* rotational molding

Products|

* Plastics industry
* Commodity plastics
* Engineering plastics
* High-performance plastics
* Plastic film
* Plastic bottle
* Plastic bag
* Plastic shopping bag
* Plastic cutlery
* Blister pack
* Foam food container
* Construction
* Geosynthetics
* Category:Plastics applications

Environment and health|

* v
* t
* e

Health issues of plastics and polyhalogenated compounds (PHCs)

Plasticizers: Phthalates|

* DIBP
* DBP
* BBP (BBzP)
* DIHP
* DEHP (DOP)
* DIDP
* DINP

Miscellaneous plasticizers|

* Organophosphates
* Adipates (DEHA
* DOA)

Monomers|

* Bisphenol A (BPA, in Polycarbonates)
* Vinyl chloride (in PVC)

Miscellaneous additives incl. PHCs|

* PBDEs
* PCBs
* Organotins
* PFCs
* Perfluorooctanoic acid

Health issues|

* Teratogen
* Carcinogen
* Endocrine disruptor
* Diabetes
* Obesity
* Obesogen
* Polymer fume fever

Pollution|

* Plastic pollution
* Rubber pollution
* Great Pacific garbage patch
* Persistent organic pollutant
* Dioxins
* List of environmental health hazards

Regulations|

* California Proposition 65
* European REACH regulation
* Japan Toxic Substances Law
* Toxic Substances Control Act

Waste|

* Plastic pollution
* Great Pacific garbage patch
* Persistent organic pollutant
* Dioxins
* List of environmental health hazards
* Plastic recycling
* Biodegradable plastic

Identification codes

* v
* t
* e

Labeling

Label construction|

* Adhesive
* Die cutting (web)
* Hologram
* In-mould labelling
* Label
* Paper
* Perforation
* Pressure-sensitive adhesive
* Plastic
* Printing
* Security hologram
* Release liner
* Security printing
* Security label
* Smart label
* Sticker

Content|

* Advertising
* Barcode
* Country of origin
* Cigarette warning label
* Ecolabel
* EU energy label
* Fair Packaging and Labeling Act
* List of food labeling regulations
* Mandatory labelling
* Nameplate
* Nutrition facts label
* Plain tobacco packaging
* Radio-frequency identification
* United Kingdom food labelling regulations
* UPC
* Warning label
* Wine label

Use|

* Advertising
* Authentication
* Automatic identification and data capture
* Label dispenser
* Label printer
* Packaging and labeling
* Track and trace

* v
* t
* e

Rubber

Chemical types|

* Natural rubber
* Synthetic rubber
* Butyl rubber
* Styrene-butadiene
* Nitrile rubber
* Silicone rubber
* Chloroprene rubber
* EPDM rubber

Mechanical types|

* Foam rubber
* Micronized rubber powder
* Cold rubber

Additives|

* Polymer additive
* Plasticizer
* Polymer stabilizers
* Biodegradable additives
* Filler (materials)

Rubber processing|

* Rubber tapping
* Rubber technology
* Vulcanization

Industry|

* Rubber industry in Malaysia
* Rubber Industry Smallholders Development Authority
* Rubber Board
* Michelin
* Dunlop
* Bridgestone
* United States Rubber Company
* Goodyear Tire and Rubber Company
* Rubber Manufacturers Association
* List of tire companies
* Category:Rubber industry

Products|

* Tires
* Rubber mulch
* Rubberized asphalt
* Rubber band
* Category:Rubber products

Waste|

* Rubber pollution
* Great Pacific garbage patch
* Persistent organic pollutant
* Dioxins
* Environmental hazards
* Tire-derived fuel
* Rubber recycling
* Airfield rubber removal

Tire codes

Template:Sculptures

* v
* t
* e

Human impact on the environment

General|

* Environmental issues
* list of issues
* Human impact
* Impact assessment
* Planetary boundaries

Causes|

* Agriculture
* irrigation
* meat production
* cocoa production
* palm oil
* Energy industry
* biofuels
* biodiesel
* coal
* nuclear power
* oil shale
* petroleum
* reservoirs
* Genetic pollution
* Industrialisation
* Land use
* Manufacturing
* cleaning agents
* concrete
* plastics
* nanotechnology
* paint
* paper
* pesticides
* pharmaceuticals and personal care
* Marine life
* fishing
* fishing down the food web
* marine pollution
* overfishing
* Mining
* Overdrafting
* Overexploitation
* Overgrazing
* Overpopulation
* Particulates
* Pollution
* Quarrying
* Reservoirs
* Tourism
* Transport
* aviation
* roads
* shipping
* Urbanization
* urban sprawl
* War

Effects|

* Biodiversity threats
* biodiversity loss
* decline in amphibian populations
* decline in insect populations
* Climate change
* global warming
* runaway climate change
* Coral reefs
* Deforestation
* Defaunation
* Desertification
* Ecocide
* Erosion
* Environmental degradation
* Freshwater cycle
* Habitat destruction
* Holocene extinction
* Nitrogen cycle
* Land degradation
* Land consumption
* Land surface effects on climate
* Loss of green belts
* Phosphorus cycle
* Ocean acidification
* Ozone depletion
* Resource depletion
* Water degradation
* Water scarcity

Mitigation|

* Birth control
* Cleaner production
* Climate change mitigation
* Climate engineering
* Community resilience
* Decoupling
* Ecological engineering
* Environmental engineering
* Environmental mitigation
* Industrial ecology
* Mitigation banking
* Organic farming
* Reforestation
* urban
* Restoration ecology
* Sustainable consumption
* Waste minimization

* Commons
* Category
* by country
* assessment
* mitigation

Template:Technology topics

* v
* t
* e

Health issues of plastics and polyhalogenated compounds (PHCs)

Plasticizers: Phthalates|

* DIBP
* DBP
* BBP (BBzP)
* DIHP
* DEHP (DOP)
* DIDP
* DINP

Miscellaneous plasticizers|

* Organophosphates
* Adipates (DEHA
* DOA)

Monomers|

* Bisphenol A (BPA, in Polycarbonates)
* Vinyl chloride (in PVC)

Miscellaneous additives incl. PHCs|

* PBDEs
* PCBs
* Organotins
* PFCs
* Perfluorooctanoic acid

Health issues|

* Teratogen
* Carcinogen
* Endocrine disruptor
* Diabetes
* Obesity
* Obesogen
* Polymer fume fever

Pollution|

* Plastic pollution
* Rubber pollution
* Great Pacific garbage patch
* Persistent organic pollutant
* Dioxins
* List of environmental health hazards

Regulations|

* California Proposition 65
* European REACH regulation
* Japan Toxic Substances Law
* Toxic Substances Control Act

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Plastic. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Plastic&oldid=4028034"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template