Lasing threshold

Short description: Input power level at which a laser generates light primarily by stimulated emission

In laser science, the lasing threshold is the lowest excitation level at which a laser's output is dominated by stimulated emission rather than by spontaneous emission. Below the threshold, the laser's output power rises slowly with increasing excitation. Above the threshold, the slope of power vs. excitation is orders of magnitude greater. The linewidth of the laser's emission also becomes orders of magnitude smaller above the threshold than it is below. Above the threshold, the laser is said to be lasing. The term "lasing" is a back formation from "laser," which is an acronym, not an agent noun.

## Theory

The lasing threshold is reached when the optical gain of the laser medium is exactly balanced by the sum of all the losses experienced by light in one round trip of the laser's optical cavity. This can be expressed, assuming steady-state operation, as

R1R2exp⁡(2gthresholdl)exp⁡(−2αl)=1.

Here R1 and R2 are the mirror (power) reflectivities, l is the length of the gain medium, exp⁡(2gthresholdl) is the round-trip threshold power gain, and exp⁡(−2αl) is the round trip power loss. Note that α>0. This equation separates the losses in a laser into localised losses due to the mirrors, over which the experimenter has control, and distributed losses such as absorption and scattering. The experimenter typically has little control over the distributed losses.

The optical loss is nearly constant for any particular laser (α=α0), especially close to threshold. Under this assumption the threshold condition can be rearranged as[1]

gthreshold=α0−12lln⁡(R1R2).

Since R1R2<1, both terms on the right side are positive, hence both terms increase the required threshold gain parameter. This means that minimising the gain parameter gthreshold requires low distributed losses and high reflectivity mirrors. The appearance of l in the denominator suggests that the required threshold gain would be decreased by lengthening the gain medium, but this is not generally the case. The dependence on l is more complicated because α0 generally increases with l due to diffraction losses.

### Measuring the internal losses

The analysis above is predicated on the laser operating in a steady-state at the laser threshold. However, this is not an assumption which can ever be fully satisfied. The problem is that the laser output power varies by orders of magnitude depending on whether the laser is above or below threshold. When very close to threshold, the smallest perturbation is able to cause huge swings in the output laser power. The formalism can, however, be used to obtain good measurements of the internal losses of the laser as follows:[2]

Most types of laser use one mirror that is highly reflecting, and another (called the output coupler) that is partially reflective. Reflectivities greater than 99.5% are routinely achieved in dielectric mirrors. The analysis can be simplified by taking R1=1. The reflectivity of the output coupler can then be denoted ROC. The equation above then simplifies to

2gthresholdl=2α0l−ln⁡ROC.

In most cases the pumping power required to achieve lasing threshold will be proportional to the left side of the equation, that is Pthreshold∝2gthresholdl. (This analysis is equally applicable to considering the threshold energy instead of the threshold power. This is more relevant for pulsed lasers). The equation can be rewritten:

Pthreshold=K(L−ln⁡ROC),

where L is defined by L=2α0l and K is a constant. This relationship allows the variable L to be determined experimentally.

In order to use this expression, a series of slope efficiencies have to be obtained from a laser, with each slope obtained using a different output coupler reflectivity. The power threshold in each case is given by the intercept of the slope with the x-axis. The resulting power thresholds are then plotted versus −ln⁡ROC. The theory above suggests that this graph is a straight line. A line can be fitted to the data and the intercept of the line with the x-axis found. At this point the x value is equal to the round trip loss L=2α0l. Quantitative estimates of gthreshold can then be made.

One of the appealing features of this analysis is that all of the measurements are made with the laser operating above the laser threshold. This allows for measurements with low random error, however it does mean that each estimate of Pthreshold requires extrapolation.

A good empirical discussion of laser loss quantification is given in the book by W. Koechner.[3]

## References

1. ↑ Yariv, Amnon (1989). Quantum Electronics (3rd ed.). Wiley. ISBN 0-4716-0997-8.
2. ↑ Findlay, D.; Clay, R.A. (1966). "The measurement of internal losses in 4-level lasers". Physics Letters (Elsevier BV) 20 (3): 277–278. doi:10.1016/0031-9163(66)90363-5. ISSN 0031-9163. Bibcode: 1966PhL....20..277F.
3. ↑ W. Koechner, Solid-State Laser Engineering, Springer Series in Optical Sciences, Volume 1, Second Edition, Springer-Verlag 1985, ISBN 0-387-18747-2.

* v
* t
* e

Lasers

* List of laser articles
* List of laser types
* List of laser applications
* Laser acronyms

* Laser types: Solid-state
* Semiconductor
* Dye
* Gas
* Chemical
* Excimer
* Ion
* Metal Vapor

Laser physics|

* Active laser medium
* Amplified spontaneous emission
* Continuous wave
* Doppler cooling
* Laser ablation
* Laser cooling
* Laser linewidth
* Lasing threshold
* Magneto-optical trap
* Optical tweezers
* Population inversion
* Resolved sideband cooling
* Ultrashort pulse

Laser optics|

* Beam expander
* Beam homogenizer
* B Integral
* Chirped pulse amplification
* Gain-switching
* Gaussian beam
* Injection seeder
* Laser beam profiler
* M squared
* Mode-locking
* Multiple-prism grating laser oscillator
* Multiphoton intrapulse interference phase scan
* Optical amplifier
* Optical cavity
* Optical isolator
* Output coupler
* Q-switching
* Regenerative amplification

Laser spectroscopy|

* Cavity ring-down spectroscopy
* Confocal laser scanning microscopy
* Laser-based angle-resolved photoemission spectroscopy
* Laser diffraction analysis
* Laser-induced breakdown spectroscopy
* Laser-induced fluorescence
* Noise-immune cavity-enhanced optical heterodyne molecular spectroscopy
* Raman spectroscopy
* Second-harmonic imaging microscopy
* Terahertz time-domain spectroscopy
* Tunable diode laser absorption spectroscopy
* Two-photon excitation microscopy
* Ultrafast laser spectroscopy

Laser ionization|

* Above threshold ionization
* Atmospheric-pressure laser ionization
* Matrix-assisted laser desorption/ionization
* Resonance-enhanced multiphoton ionization
* Soft laser desorption
* Surface-assisted laser desorption/ionization
* Surface-enhanced laser desorption/ionization

Laser fabrication|

* Laser beam welding
* Laser bonding
* Laser converting
* Laser cutting
* Laser cutting bridge
* Laser drilling
* Laser engraving
* Laser-hybrid welding
* Laser peening
* Multiphoton lithography
* Pulsed laser deposition
* Selective laser melting
* Selective laser sintering

Laser medicine|

* Computed tomography laser mammography
* IntraLASIK
* Laser capture microdissection
* Laser hair removal
* Laser lithotripsy
* Laser coagulation
* Laser scalpel
* Laser surgery
* Laser thermal keratoplasty
* LASIK
* Low level laser therapy
* Optical coherence tomography
* Photorefractive keratectomy
* Photorejuvenation
* Soft-tissue laser surgery

Laser fusion|

* Argus laser
* Cyclops laser
* GEKKO XII
* HiPER
* ISKRA lasers
* Janus laser
* Laboratory for Laser Energetics
* Laser integration line
* Laser Mégajoule
* Long path laser
* LULI2000
* Mercury laser
* National Ignition Facility
* Nike laser
* Nova (laser)
* Novette laser
* Shiva laser
* Trident laser
* Vulcan laser

Civil applications|

* 3D laser scanner
* CD
* DVD
* Laser lighting display
* Laser pointer
* Laser printer
* Laser tag

Military applications|

* Advanced Tactical Laser
* Boeing Laser Avenger
* Dazzler (weapon)
* Electrolaser
* Laser designator
* Laser guidance
* Laser-guided bomb
* Laser guns
* Laser rangefinder
* Laser warning receiver
* Laser weapon
* LLM01
* Multiple Integrated Laser Engagement System
* Tactical High Energy Laser
* Tactical light
* ZEUS-HLONS (HMMWV Laser Ordnance Neutralization System)

* Category
* Commons

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Lasing threshold. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Lasing_threshold&oldid=4369989"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template