Artificial photosynthesis

Short description: Artificial process that uses sunlight energy to drive chemical synthesis

Artificial photosynthesis is a chemical process that biomimics the natural process of photosynthesis to convert sunlight, water, and carbon dioxide into carbohydrates and oxygen. The term artificial photosynthesis is commonly used to refer to any scheme for capturing and storing the energy from sunlight in the chemical bonds of a fuel (a solar fuel). Photocatalytic water splitting converts water into hydrogen and oxygen and is a major research topic of artificial photosynthesis. Light-driven carbon dioxide reduction is another process studied that replicates natural carbon fixation.

Research on this topic includes the design and assembly of devices for the direct production of solar fuels, photoelectrochemistry and its application in fuel cells, and the engineering of enzymes and photoautotrophic microorganisms for microbial biofuel and biohydrogen production from sunlight.

## Contents

* 1 Overview
* 2 History
* 3 Current research
* 3.1 Hydrogen catalysts
* 3.2 Water-oxidizing catalysts
* 3.3 Photosensitizers
* 3.4 Carbon dioxide reduction catalysts
* 3.5 Photobiological production of fuels
* 3.6 Food production
* 4 Employed research techniques
* 5 Advantages, disadvantages, and efficiency
* 6 See also
* 7 References
* 8 External links

## Overview

The photosynthetic reaction can be divided into two half-reactions of oxidation and reduction, both of which are essential to producing fuel. In plant photosynthesis, water molecules are photo-oxidized to release oxygen and protons. The second phase of plant photosynthesis (also known as the Calvin-Benson cycle) is a light-independent reaction that converts carbon dioxide into glucose (fuel). Researchers of artificial photosynthesis are developing photocatalysts that are able to perform both of these reactions. Furthermore, the protons resulting from water splitting can be used for hydrogen production. These catalysts must be able to react quickly and absorb a large percentage of the incident solar photons.[1]

Natural (left) versus artificial photosynthesis (right)

Whereas photovoltaics can provide energy directly from sunlight, the inefficiency of fuel production from photovoltaic electricity (indirect process) and the fact that sunshine is not constant throughout the day sets a limit to its use.[2][3] One way of using natural photosynthesis is for the production of a biofuel, which is an indirect process that suffers from low energy conversion efficiency (due to photosynthesis' own low efficiency in converting sunlight to biomass), the cost of harvesting and transporting the fuel, and conflicts due to the increasing need of land mass for food production.[4] The purpose of artificial photosynthesis is to produce a fuel from sunlight that can be stored conveniently and used when sunlight is not available,[5] by using direct processes, that is, to produce a solar fuel. With the development of catalysts able to reproduce the major parts of photosynthesis, the only inputs needed to produce clean energy would ultimately be water, carbon dioxide and sunlight. The only by-product would be oxygen, and production of a solar fuel has the potential to be cheaper than gasoline.[6]

One process for the creation of a clean and affordable energy supply is the development of photocatalytic water splitting under solar light. This method of sustainable hydrogen production is a major objective for the development of alternative energy systems.[7] It is also predicted to be one of the more, if not the most, efficient ways of obtaining hydrogen from water.[8] The conversion of solar energy into hydrogen via a water-splitting process assisted by photosemiconductor catalysts is one of the most promising technologies in development.[9] This process has the potential for large quantities of hydrogen to be generated in an ecologically sound manner.[citation needed] The conversion of solar energy into a clean fuel (H2) under ambient conditions is one of the greatest challenges facing scientists in the twenty-first century.[10]

Two methods are generally recognized for the construction of solar fuel cells for hydrogen production:[11]

* A homogeneous system is one such that catalysts are not compartmentalized, that is, components are present in the same compartment. This means that hydrogen and oxygen are produced in the same location. This can be a drawback, since they compose an explosive mixture, demanding gas product separation. Also, all components must be active in approximately the same conditions (e.g., pH).
* A heterogeneous system has two separate electrodes, an anode and a cathode, making possible the separation of oxygen and hydrogen production. Furthermore, different components do not necessarily need to work in the same conditions. However, the increased complexity of these systems makes them harder to develop and more expensive.

Another area of research within artificial photosynthesis is the selection and manipulation of photosynthetic microorganisms, namely green microalgae and cyanobacteria, for the production of solar fuels. Many strains are able to produce hydrogen naturally, and scientists are working to improve them.[12] Algae biofuels such as butanol and methanol are produced both at laboratory and commercial scales. This method has benefited from the development of synthetic biology,[12] which is also being explored by the J. Craig Venter Institute to produce a synthetic organism capable of biofuel production.[13][14] In 2017, an efficient process was developed to produce acetic acid from carbon dioxide using "cyborg bacteria".[15]

## History

Artificial photosynthesis was first anticipated by the Italian chemist Giacomo Ciamician during 1912.[16] In a lecture that was later published in Science[17] he proposed a switch from the use of fossil fuels to radiant energy provided by the sun and captured by technical photochemistry devices. In this switch he saw a possibility to lessen the difference between the rich north of Europe and poor south and ventured a guess that this switch from coal to solar energy would "not be harmful to the progress and to human happiness."[18]

During the late 1960s, Akira Fujishima discovered the photocatalytic properties of titanium dioxide, the so-called Honda-Fujishima effect, which could be used for hydrolysis.[19]

Visible light water splitting with a one piece multijunction semiconductor device (vs. UV light with titanium dioxide semiconductors) was first demonstrated and patented by William Ayers at Energy Conversion Devices during 1983.[20][21] This group demonstrated water photolysis into hydrogen and oxygen, now referred to as an "artificial leaf" with a low cost, thin film amorphous silicon multijunction sheet immersed directly in water. Hydrogen evolved on the front amorphous silicon surface decorated with various catalysts while oxygen evolved from the back side metal substrate which also eliminated the hazard of mixed hydrogen/oxygen gas evolution. A polymer membrane above the immersed device provided a path for proton transport. The higher photovoltage available from the multijunction thin film device with visible light was a major advance over previous photolysis attempts with UV or other single junction semiconductor photoelectrodes. The group's patent also lists several other semiconductor multijunction compositions in addition to amorphous silicon.

The Swedish Consortium for Artificial Photosynthesis, the first of its kind, was established during 1994 as a collaboration between groups of three different universities, Lund, Uppsala and Stockholm, being presently active around Lund and the Ångström Laboratories in Uppsala.[22] The consortium was built with a multidisciplinary approach to focus on learning from natural photosynthesis and applying this knowledge in biomimetic systems.[23]

Research of artificial photosynthesis is experiencing a boom at the beginning of the 21st century.[2] During 2000, Commonwealth Scientific and Industrial Research Organisation (CSIRO) researchers publicized their intent to emphasize carbon dioxide capture and its conversion to hydrocarbons.[24][25] In 2003, the Brookhaven National Laboratory announced the discovery of an important intermediate part of the reduction of CO2 to CO (the simplest possible carbon dioxide reduction reaction), which could result in better catalysts.[26][27]

One of the disadvantages of artificial systems for water-splitting catalysts is their general reliance on scarce, expensive elements, such as ruthenium or rhenium.[2] During 2008, with the funding of the United States Air Force Office of Scientific Research,[28] MIT chemist and director of the Solar Revolution Project Daniel G. Nocera and postdoctoral fellow Matthew Kanan attempted to circumvent this problem by using a catalyst containing the cheaper and more abundant elements cobalt and phosphate.[29][30] The catalyst was able to split water into oxygen and protons using sunlight, and could potentially be coupled to a hydrogen gas producing catalyst such as platinum. Furthermore, while the catalyst broke down during catalysis, it could self-repair.[31] This experimental catalyst design was considered a major improvement by many researchers.[32][33]

Whereas CO is the prime reduction product of CO2, more complex carbon compounds are usually desired. During 2008, Andrew B. Bocarsly reported the direct conversion of carbon dioxide and water to methanol using solar energy in a very efficient photochemical cell.[34]

While Nocera and coworkers had accomplished water splitting to oxygen and protons, a light-driven process to produce hydrogen is desirable. During 2009, the Leibniz Institute for Catalysis reported inexpensive iron carbonyl complexes able to do just that.[35][36] During the same year, researchers at the University of East Anglia also used iron carbonyl compounds to achieve photoelectrochemical hydrogen production with 60% efficiency, this time using a gold electrode covered with layers of indium phosphide to which the iron complexes were linked.[37] Both of these processes used a molecular approach, where discrete nanoparticles are responsible for catalysis.

During 2009, F. del Valle and K. Domen showed the effect of the thermal treatment in a closed atmosphere using Cd1-xZnxS photocatalysts. Cd1-xZnxS solid solution reports high activity in hydrogen production from water splitting under sunlight irradiation.[38] A mixed heterogeneous/molecular approach by researchers at the University of California, Santa Cruz, during 2010, using both nitrogen-doped and cadmium selenide quantum dots-sensitized titanium dioxide nanoparticles and nanowires, also yielded photoproduced hydrogen.[39]

Artificial photosynthesis remained an academic field for many years. However, in the beginning of 2009, Mitsubishi Chemical Holdings was reported to be developing its own artificial photosynthesis research by using sunlight, water and carbon dioxide to "create the carbon building blocks from which resins, plastics and fibers can be synthesized."[40] This was confirmed with the establishment of the KAITEKI Institute later that year, with carbon dioxide reduction through artificial photosynthesis as one of the main goals.[41][42]

During 2010, the United States Department of Energy established, as one of its Energy Innovation Hubs, the Joint Center for Artificial Photosynthesis.[43] The mission of JCAP is to find a cost-effective method to produce fuels using only sunlight, water, and carbon-dioxide as inputs. JCAP is managed by a team from the California Institute of Technology (Caltech), directed by Professor Nathan Lewis and brings together more than 120 scientists and engineers from Caltech and its main partner, Lawrence Berkeley National Laboratory. JCAP also draws on the expertise and capabilities of key partners from Stanford University, the University of California at Berkeley, UCSB, University of California, Irvine, and University of California at San Diego, and the Stanford Linear Accelerator. Additionally, JCAP serves as a central hub for other solar fuels research teams across the United States, including 20 DOE Energy Frontier Research Center. The program had a budget of $122M over five years, subject to Congressional appropriation[44]

Also during 2010, a team directed by professor David Wendell at the University of Cincinnati successfully demonstrated photosynthesis in an artificial construct consisting of enzymes suspended in a foam housing.[45]

During 2011, Daniel Nocera and his research team announced the creation of the first practical artificial leaf. In a speech at the 241st National Meeting of the American Chemical Society, Nocera described an advanced solar cell the size of a poker card capable of splitting water into oxygen and hydrogen, approximately ten times more efficient than natural photosynthesis.[46] The cell is mostly made of inexpensive materials that are widely available, works under simple conditions, and shows increased stability over previous catalysts: in laboratory studies, the authors demonstrated that an artificial leaf prototype could operate continuously for at least forty-five hours without a drop in activity.[47] In May 2012, Sun Catalytix, the startup based on Nocera's research, stated that it will not be scaling up the prototype as the device offers few savings over other ways to make hydrogen from sunlight.[48] Leading experts in the field have supported a proposal for a Global Project on Artificial Photosynthesis as a combined energy security and climate change solution.[49] Conferences on this theme have been held at Lord Howe Island during 2011,[50] at Chicheley Hall in the UK in 2014[51] and at Canberra and Lord Howe island during 2016.[52]

## Current research

In energy terms, natural photosynthesis can be divided in three steps:[11][23]

* Light-harvesting complexes in bacteria and plants capture photons and transduce them into electrons, injecting them into the photosynthetic chain.
* Proton-coupled electron transfer along several cofactors of the photosynthetic chain, causing local, spatial charge separation.
* Redox catalysis, which uses the aforementioned transferred electrons to oxidize water to dioxygen and protons; these protons can in some species be utilized for dihydrogen production.

A triad assembly, with a photosensitizer (P) linked in tandem to a water oxidation catalyst (D) and a hydrogen evolving catalyst (A). Electrons flow from D to A when catalysis occurs.

Using biomimetic approaches, artificial photosynthesis tries to construct systems doing the same type of processes. Ideally, a triad assembly could oxidize water with one catalyst, reduce protons with another and have a photosensitizer molecule to power the whole system. One of the simplest designs is where the photosensitizer is linked in tandem between a water oxidation catalyst and a hydrogen evolving catalyst:

* The photosensitizer transfers electrons to the hydrogen catalyst when hit by light, becoming oxidized in the process.
* This drives the water splitting catalyst to donate electrons to the photosensitizer. In a triad assembly, such a catalyst is often referred to as a donor. The oxidized donor is able to perform water oxidation.

The state of the triad with one catalyst oxidized on one end and the second one reduced on the other end of the triad is referred to as a charge separation, and is a driving force for further electron transfer, and consequently catalysis, to occur. The different components may be assembled in diverse ways, such as supramolecular complexes, compartmentalized cells, or linearly, covalently linked molecules.[11]

Research into finding catalysts that can convert water, carbon dioxide, and sunlight to carbohydrates or hydrogen is a current, active field. By studying the natural oxygen-evolving complex (OEC), researchers have developed catalysts such as the "blue dimer" to mimic its function. However, these catalysts are still inefficient.[6]

Photoelectrochemical cells that reduce carbon dioxide into carbon monoxide (CO), formic acid (HCOOH) and methanol (CH3OH) are under development.[53] Similar to natural photosynthesis, such artificial leaves can use a tandem of light absorbers for overall water splitting or CO2 reduction. These integrated systems can be assembled on lightweight, flexible substrates, resulting in floating devices resembling lotus leaves.[54]

Phycobilitproteins from algae are under development for renewable energy production.[55]

### Hydrogen catalysts

Hydrogen is the simplest solar fuel to synthesize, since it involves only the transference of two electrons to two protons. It must, however, be done stepwise, with formation of an intermediate hydride anion:

2 e− \+ 2 H+ ⇌ H+ \+ H− ⇌ H2

The proton-to-hydrogen converting catalysts present in nature are hydrogenases. These are enzymes that can either reduce protons to molecular hydrogen or oxidize hydrogen to protons and electrons. Spectroscopic and crystallographic studies spanning several decades have resulted in a good understanding of both the structure and mechanism of hydrogenase catalysis.[56][57] Using this information, several molecules mimicking the structure of the active site of both nickel-iron and iron-iron hydrogenases have been synthesized.[11][58] Other catalysts are not structural mimics of hydrogenase but rather functional ones. Synthesized catalysts include structural H-cluster models,[11][59] a dirhodium photocatalyst,[60] and cobalt catalysts.[11][61]

### Water-oxidizing catalysts

Water oxidation is a more complex chemical reaction than proton reduction. In nature, the oxygen-evolving complex performs this reaction by accumulating reducing equivalents (electrons) in a manganese-calcium cluster within photosystem II (PS II), then delivering them to water molecules, with the resulting production of molecular oxygen and protons:

2 H2O → O2 \+ 4 H+ \+ 4e−

Without a catalyst (natural or artificial), this reaction is very endothermic, requiring high temperatures (at least 2500 K).[8]

The exact structure of the oxygen-evolving complex has been hard to determine experimentally.[62] As of 2011, the most detailed model was from a 1.9 Å resolution crystal structure of photosystem II.[63] The complex is a cluster containing four manganese and one calcium ions, but the exact location and mechanism of water oxidation within the cluster is unknown. Nevertheless, bio-inspired manganese and manganese-calcium complexes have been synthesized, such as [Mn4O4] cubane-type clusters, some with catalytic activity.[64]

Some ruthenium complexes, such as the dinuclear µ-oxo-bridged "blue dimer" (the first of its kind to be synthesized), are capable of light-driven water oxidation, thanks to being able to form high valence states.[11] In this case, the ruthenium complex acts as both photosensitizer and catalyst. This complexes and other molecular catalysts still attract researchers in the field, having different advantages such as clear structure, active site, and easy to study mechanism. One of the main challenges to overcome is their short-term stability and their effective heterogenization for applications in artificial photosynthesis devices.[65]

Many metal oxides have been found to have water oxidation catalytic activity, including ruthenium(IV) oxide (RuO2), iridium(IV) oxide (IrO2), cobalt oxides (including nickel-doped Co3O4), manganese oxide (including layered MnO2 (birnessite), Mn2O3), and a mix of Mn2O3 with CaMn2O4. Oxides are easier to obtain than molecular catalysts, especially those from relatively abundant transition metals (cobalt and manganese), but suffer from low turnover frequency and slow electron transfer properties, and their mechanism of action is hard to decipher and, therefore, to adjust.[7]

Recently Metal-Organic Framework (MOF)-based materials have been shown to be a highly promising candidate for water oxidation with first row transition metals.[66][67] The stability and tunability of this system is projected to be highly beneficial for future development.[68]

### Photosensitizers

Structure of [Ru(bipy)3]2+, a broadly used photosensitizer.

Nature uses pigments, mainly chlorophylls, to absorb a broad part of the visible spectrum. Artificial systems can use either one type of pigment with a broad absorption range or combine several pigments for the same purpose.

Ruthenium polypyridine complexes, in particular tris(bipyridine)ruthenium(II) and its derivatives, have been extensively used in hydrogen photoproduction due to their efficient visible light absorption and long-lived consequent metal-to-ligand charge transfer excited state, which makes the complexes strong reducing agents.[11] Other noble metal-containing complexes used include ones with platinum, rhodium and iridium.[11]

Metal-free organic complexes have also been successfully employed as photosensitizers. Examples include eosin Y and rose bengal.[11] Pyrrole rings such as porphyrins have also been used in coating nanomaterials or semiconductors for both homogeneous and heterogeneous catalysis.[7][53]

As part of current research efforts artificial photonic antenna systems are being studied to determine efficient and sustainable ways to collect light for artificial photosynthesis. Gion Calzaferri (2009) describes one such antenna that uses zeolite L as a host for organic dyes, to mimic plant's light collecting systems.[69] The antenna is fabricated by inserting dye molecules into the channels of zeolite L. The insertion process, which takes place under vacuum and at high temperature conditions, is made possible by the cooperative vibrational motion of the zeolite framework and of the dye molecules.[70] The resulting material may be interfaced to an external device via a stopcock intermediate.[71][72]

### Carbon dioxide reduction catalysts

In nature, carbon fixation is done by green plants using the enzyme RuBisCO as a part of the Calvin cycle. RuBisCO is a rather slow catalyst compared to the vast majority of other enzymes, incorporating only a few molecules of carbon dioxide into ribulose-1,5-bisphosphate per minute, but does so at atmospheric pressure and in mild, biological conditions.[73] The resulting product is further reduced and eventually used in the synthesis of glucose, which in turn is a precursor to more complex carbohydrates, such as cellulose and starch. The process consumes energy in the form of ATP and NADPH.

Artificial CO2 reduction for fuel production aims mostly at producing reduced carbon compounds from atmospheric CO2. Some transition metal polyphosphine complexes have been developed for this end; however, they usually require previous concentration of CO2 before use, and carriers (molecules that would fixate CO2) that are both stable in aerobic conditions and able to concentrate CO2 at atmospheric concentrations haven't been yet developed.[74] The simplest product from CO2 reduction is carbon monoxide (CO), but for fuel development, further reduction is needed (for example, to multi-carbon products), and a key step also needing further development is the transfer of hydride anions to CO.[74]

### Photobiological production of fuels

Some photoautotrophic microorganisms can, under certain conditions, produce hydrogen. Nitrogen-fixing microorganisms, such as filamentous cyanobacteria, possess the enzyme nitrogenase, responsible for conversion of atmospheric N2 into ammonia; molecular hydrogen is a byproduct of this reaction, and is many times not released by the microorganism, but rather taken up by a hydrogen-oxidizing (uptake) hydrogenase. One way of forcing these organisms to produce hydrogen is then to annihilate uptake hydrogenase activity. This has been done on a strain of Nostoc punctiforme: one of the structural genes of the NiFe uptake hydrogenase was inactivated by insertional mutagenesis, and the mutant strain showed hydrogen evolution under illumination.[75]

Many of these photoautotrophs also have bidirectional hydrogenases, which can produce hydrogen under certain conditions. However, other energy-demanding metabolic pathways can compete with the necessary electrons for proton reduction, decreasing the efficiency of the overall process; also, these hydrogenases are very sensitive to oxygen.[12]

Several carbon-based biofuels have also been produced using cyanobacteria, such as 1-butanol.[76]

Synthetic biology techniques are predicted to be useful for this topic. Microbiological and enzymatic engineering have the potential of improving enzyme efficiency and robustness, as well as constructing new biofuel-producing metabolic pathways in photoautotrophs that previously lack them, or improving on the existing ones.[12][76] Another topic being developed is the optimization of photobioreactors for commercial application.[77]

### Food production

Researchers have achieved controlled growth of diverse foods in the dark via solar energy and electrocatalysis-based artificial photosynthesis. It may become a way to increase energy efficiency of food production and reduce its environmental impacts.[78][79] However, it is unclear if food production mechanisms based on the experimental process are viable and can be scaled.

## Employed research techniques

Research in artificial photosynthesis is necessarily a multidisciplinary topic, requiring a multitude of different expertise.[12] Some techniques employed in making and investigating catalysts and solar cells include:

* Organic and inorganic chemical synthesis.
* Electrochemistry methods, such as photoelectrochemistry, cyclic voltammetry, electrochemical impedance spectroscopy, dielectric spectroscopy and bulk electrolysis.
* Spectroscopic methods:
* fast techniques, such as time-resolved spectroscopy and ultrafast laser spectroscopy;
* magnetic resonance spectroscopies, such as nuclear magnetic resonance, electron paramagnetic resonance;
* X-ray spectroscopy methods, including x-ray absorption such as XANES and EXAFS, but also x-ray emission.
* Crystallography.
* Molecular biology, microbiology and synthetic biology methodologies.

## Advantages, disadvantages, and efficiency

Advantages of solar fuel production through artificial photosynthesis include:

* The solar energy can be immediately converted and stored. In photovoltaic cells, sunlight is converted into electricity and then converted again into chemical energy for storage, with some necessary losses of energy associated with the second conversion.
* The byproducts of these reactions are environmentally friendly. Artificially photosynthesized fuel would be a carbon-neutral source of energy, which could be used for transportation or homes.

Disadvantages include:

* Materials used for artificial photosynthesis often corrode in water, so they may be less stable than photovoltaics over long periods of time. Most hydrogen catalysts are very sensitive to oxygen, being inactivated or degraded in its presence; also, photodamage may occur over time.[11][80]
* The cost is not (yet) advantageous enough to compete with fossil fuels as a commercially viable source of energy.[3]

A concern usually addressed in catalyst design is efficiency, in particular how much of the incident light can be used in a system in practice. This is comparable with photosynthetic efficiency, where light-to-chemical-energy conversion is measured. Photosynthetic organisms are able to collect about 50% of incident solar radiation, however the theoretical limit of photosynthetic efficiency is 4.6 and 6.0% for C3 and C4 plants respectively.[81]

## See also

* Bacteriorhodopsin
* ATP synthase
* Photoelectrochemistry
* AlgaePARC
* Carbon footprint
* Fuel cell
* Hydrogen economy
* List of emerging technologies
* Metabolic engineering
* Photosensitizer

## References

1. ↑ Yarris, Lynn (2009-03-10). "Turning Sunlight into Liquid Fuels: Berkeley Lab Researchers Create a Nano-sized Photocatalyst for Artificial Photosynthesis". Berkeley Lab News Center. Lawrence Berkeley National Laboratory. http://newscenter.lbl.gov/press-releases/2009/03/10/turning-sunlight-into-liquid-fuels-berkeley-lab-researchers-create-a-nano-sized-photocatalyst-for-artificial-photosynthesis/.
2. ↑ 2.0 2.1 2.2 Styring, Stenbjörn (21 December 2011). "Artificial photosynthesis for solar fuels". Faraday Discussions 155 (Advance Article): 357–376. doi:10.1039/C1FD00113B. PMID 22470985. Bibcode: 2012FaDi..155..357S.
3. ↑ 3.0 3.1 "The Difference Engine: The sunbeam solution". The Economist. 11 February 2011. https://www.economist.com/blogs/babbage/2011/02/artificial_photosynthesis.
4. ↑ Listorti, Andrea; Durrant, James; Barber, Jim (December 2009). "Solar to Fuel". Nature Materials 8 (12): 929–930. doi:10.1038/nmat2578. PMID 19935695. Bibcode: 2009NatMa...8..929L.
5. ↑ "Artificial Photosynthesis Can Produce Food in Complete Darkness" (in en-US). 25 June 2022. https://scitechdaily.com/artificial-photosynthesis-can-produce-food-in-complete-darkness/amp/.
6. ↑ 6.0 6.1 Gathman, Andrew. "Energy at the Speed of Light". Online Research. PennState. http://www.rps.psu.edu/0009/energy.html.
7. ↑ 7.0 7.1 7.2 Carraro, Mauro; Sartorel, Andrea; Toma, Francesca; Puntoriero, Fausto; Scandola, Franco; Campagna, Sebastiano; Prato, Maurizio; Bonchio, Marcella (2011). Artificial Photosynthesis Challenges: Water Oxidation at Nanostructured Interfaces. Topics in Current Chemistry. 303. pp. 121–150. doi:10.1007/128_2011_136. ISBN 978-3-642-22293-1.
8. ↑ 8.0 8.1 Bockris, J.O'M.; Dandapani, B.; Cocke, D.; Ghoroghchian, J. (1985). "On the splitting of water". International Journal of Hydrogen Energy 10 (3): 179–201. doi:10.1016/0360-3199(85)90025-4.
9. ↑ Wang, Qian (24 August 2020). "Molecularly engineered photocatalyst sheet for scalable solar formate production from carbon dioxide and water". Nature Energy 5 (9): 703–710. doi:10.1038/s41560-020-0678-6. Bibcode: 2020NatEn...5..703W. http://nrl.northumbria.ac.uk/id/eprint/44595/1/Nature Energy AAM.pdf.
10. ↑ Navarro, R.M.; del Valle, F.; de la Mano, J.A. Villoria; Álvarez-Galván, M.C.; Fierro, J.L.G. (2009). Photocatalytic Water Splitting Under Visible Light: Concept and Catalysts Development. Advances in Chemical Engineering. 36. pp. 111–143. doi:10.1016/S0065-2377(09)00404-9. ISBN 9780123747631.
11. ↑ 11.00 11.01 11.02 11.03 11.04 11.05 11.06 11.07 11.08 11.09 11.10 Andreiadis, Eugen S.; Chavarot-Kerlidou, Murielle; Fontecave, Marc; Artero, Vincent (September–October 2011). "Artificial Photosynthesis: From Molecular Catalysts for Light-driven Water Splitting to Photoelectrochemical Cells". Photochemistry and Photobiology 87 (5): 946–964. doi:10.1111/j.1751-1097.2011.00966.x. PMID 21740444.
12. ↑ 12.0 12.1 12.2 12.3 12.4 Magnuson, Ann; Anderlund, Magnus; Johansson, Olof; Lindblad, Peter; Lomoth, Reiner; Polivka, Tomas; Ott, Sascha; Stensjö, Karin et al. (December 2009). "Biomimetic and Microbial Approaches to Solar Fuel Generation". Accounts of Chemical Research 42 (12): 1899–1909. doi:10.1021/ar900127h. PMID 19757805. https://zenodo.org/record/3424059.
13. ↑ JCVI. "Synthetic Biology & Bioenergy – Overview". J. Craig Venter Institute. http://www.jcvi.org/cms/research/groups/synthetic-biology-bioenergy/.
14. ↑ "Hydrogen from Water in a Novel Recombinant Cyanobacterial System". J. Craig Venter Institute. http://www.jcvi.org/cms/research/projects/hydrogen-from-water-in-a-novel-recombinant-cyanobacterial-system/overview/.
15. ↑ McGrath, Matt (22 August 2017). "'Cyborg' bacteria deliver green fuel source from sunlight". BBC News. https://www.bbc.co.uk/news/science-environment-40975719.
16. ↑ Armaroli, Nicola; Balzani, Vincenzo (2007). "The Future of Energy Supply: Challenges and Opportunities". Angewandte Chemie 46 (1–2): 52–66. doi:10.1002/anie.200602373. PMID 17103469.
17. ↑ Ciamician, Giacomo (1912). "The Photochemistry of the Future". Science 36 (926): 385–394. doi:10.1126/science.36.926.385. PMID 17836492. Bibcode: 1912Sci....36..385C. https://zenodo.org/record/1448090.
18. ↑ Balzani, Vincenzo (2008). "Photochemical Conversion of Solar Energy". ChemSusChem 1 (1–2): 26–58. doi:10.1002/cssc.200700087. PMID 18605661.
19. ↑ Fujishima, Akira; Rao, Tata N.; Tryk, Donald A. (29 June 2000). "Titanium dioxide photocatalysis". Journal of Photochemistry and Photobiology C: Photochemistry Reviews 1 (1): 1–21. doi:10.1016/S1389-5567(00)00002-2.
20. ↑ William Ayers, U.S. Patent 4,466,869 "Photolytic Production of Hydrogen"
21. ↑ Ayers, W.M. and Cannella, V. (1984) "Tandem Amorphous Silicon Photocathodes", Proc. Int'l. Conf. on Electrodynamics and Quantum Phenomena at Interfaces, Telavi, USSR
22. ↑ "Swedish Consortium for Artificial Photosynthesis". Uppsala University. http://www.fotomol.uu.se/Forskning/Biomimetics/consortium/index.shtm.
23. ↑ 23.0 23.1 Hammarström, Leif; Styring, Stenbjörn (27 March 2008). "Coupled electron transfers in artificial photosynthesis". Philosophical Transactions of the Royal Society 363 (1494): 1283–1291. doi:10.1098/rstb.2007.2225. PMID 17954432.
24. ↑ "Scientists Developing "Artificial" Plants". Sciencedaily.com. 28 November 2000. https://www.sciencedaily.com/releases/2000/11/001127224712.htm.
25. ↑ "Artificial Photosynthesis". Csiro.au. 20 September 2005. http://www.csiro.au/promos/ozadvances/Series14Artifical.htm.
26. ↑ "Designing a Better Catalyst for Artificial Photosynthesis". Bnl.gov. 9 September 2003. http://www.bnl.gov/bnlweb/pubaf/pr/2003/bnlpr090903.htm.
27. ↑ "Designing A Better Catalyst For 'Artificial Photosynthesis'". Sciencedaily.com. 10 September 2003. https://www.sciencedaily.com/releases/2003/09/030910073052.htm.
28. ↑ Lachance, Molly. "AF Funding Enables Artificial Photosynthesis". Wright-Patterson Air Force Base News. Wright-Patterson Air Force Base. http://www.wpafb.af.mil/news/story.asp?id=123118409.
29. ↑ Kanan, Matthew W.; Nocera, Daniel G. (22 August 2008). "In Situ Formation of an Oxygen-Evolving Catalyst in Neutral Water Containing Phosphate and Co2+". Science 321 (5892): 1072–1075. doi:10.1126/science.1162018. PMID 18669820. Bibcode: 2008Sci...321.1072K.
30. ↑ Trafton, Anne (July 31, 2008). "'Major discovery' from MIT primed to unleash solar revolution". MIT News. Massachusetts Institute of Technology. https://news.mit.edu/2008/major-discovery-mit-primed-unleash-solar-revolution.
31. ↑ Lutterman, Daniel A.; Surendranath, Yogesh; Nocera, Daniel G. (2009). "A Self-Healing Oxygen-Evolving Catalyst". Journal of the American Chemical Society 131 (11): 3838–3839. doi:10.1021/ja900023k. PMID 19249834.
32. ↑ "Solar-Power Breakthrough: Researchers have found a cheap and easy way to store the energy made by solar power". Technologyreview.com. http://www.technologyreview.com/Energy/21155/?a=f.
33. ↑ Kleiner, Kurt. "Electrode lights the way to artificial photosynthesis". NewScientist. Reed Business Information Ltd.. https://www.newscientist.com/article/dn14441.
34. ↑ Barton, Emily E.; Rampulla, David M.; Bocarsly, Andrew B. (2008). "Selective Solar-Driven Reduction of CO2 to Methanol Using a Catalyzed p-GaP Based Photoelectrochemical Cell". Journal of the American Chemical Society 130 (20): 6342–6344. doi:10.1021/ja0776327. PMID 18439010.
35. ↑ "Light-Driven Hydrogen Generation System Based on Inexpensive Iron Carbonyl Complexes". AZoNano.com. AZoNetwork. 2 December 2009. http://www.azonano.com/news.asp?newsID=14936.
36. ↑ Gärtner, Felix; Sundararaju, Basker; Surkus, Annette-Enrica; Boddien, Albert; Loges, Björn; Junge, Henrik; Dixneuf, Pierre H; Beller, Matthias (21 December 2009). "Light-Driven Hydrogen Generation: Efficient Iron-Based Water Reduction Catalysts". Angewandte Chemie International Edition 48 (52): 9962–9965. doi:10.1002/anie.200905115. PMID 19937629.
37. ↑ Nann, Thomas; Ibrahim, Saad K; Woi, Pei-Meng; Xu, Shu; Ziegler, Jan; Pickett, Christopher J. (22 February 2010). "Water Splitting by Visible Light: A Nanophotocathode for Hydrogen Production". Angewandte Chemie International Edition 49 (9): 1574–1577. doi:10.1002/anie.200906262. PMID 20140925.
38. ↑ del Valle, F.; Ishikawa, A.; Domen, K. (May 2009). "Influence of Zn concentration in the activity of Cd1-xZnxS solid solutions for water splitting under visible light". Catalysis Today 143 (1–2): 51–59. doi:10.1016/j.cattod.2008.09.024.Cd1-xZnxS+solid+solutions+for+water+splitting+under+visible+light&rft.jtitle=Catalysis+Today&rft.aulast=del+Valle&rft.aufirst=F.&rft.au=del+Valle, F.&rft.au=Ishikawa, A.&rft.au=Domen, K.&rft.date=May+2009&rft.volume=143&rft.issue=1–2&rft.pages=51–59&rft_id=info:doi/10.1016/j.cattod.2008.09.024&rfr_id=info:sid/en.wikibooks.org:Physics:Artificial_photosynthesis">
39. ↑ Hensel, Jennifer; Wang, Gongming; Li, Yat; Zhang, Jin Z. (2010). "Synergistic Effect of CdSe Quantum Dot Sensitization and Nitrogen Doping of TiO2 Nanostructures for Photoelectrochemical Solar Hydrogen Generation". Nano Letters 10 (2): 478–483. doi:10.1021/nl903217w. PMID 20102190. Bibcode: 2010NanoL..10..478H.
40. ↑ "Man-made photosynthesis looking to change the world". Digitalworldtokyo.com. 14 January 2009. http://www.digitalworldtokyo.com/index.php/digital_tokyo/articles/man-made_photosynthesis_looking_to_change_the_world.
41. ↑ "The Establishment of the KAITEKI Institute Inc.". CSR Environment. mitsubishi.com. http://www.mitsubishi.com/e/csr/back/environment.html.
42. ↑ "Research". The KAITEKI Institute. http://www.kaiteki-institute.com/research/index.html.
43. ↑ "Home – Joint Center for Artificial Photosynthesis". Solarfuelshub.org. http://solarfuelshub.org/.
44. ↑ "Caltech-led Team Gets up to $122 Million for Energy Innovation Hub". Caltech Media Relations. 21 July 2010. http://media.caltech.edu/press_releases/13365.
45. ↑ "Frogs, Foam and Fuel: UC Researchers Convert Solar Energy to Sugars - University of Cincinnati | University Of Cincinnati". http://www.uc.edu/news/NR.aspx?id=11558.
46. ↑ "Debut of the first practical "artificial leaf"". ACS News Releases. American Chemical Society. http://portal.acs.org/portal/acs/corg/content?_nfpb=true&_pageLabel=PP_ARTICLEMAIN&node_id=222&content_id=CNBP_026944&use_sec=true&sec_url_var=region1&__uuid=fc6e4031-a1f8-4093-9d1a-07bbc67134d0.
47. ↑ Reece, Steven Y.; Hamel, Jonathan A.; Sung, Kimberly; Jarvi, Thomas D.; Esswein, Arthur J.; Pijpers, Joep J. H.; Nocera, Daniel G. (4 November 2011). "Wireless Solar Water Splitting Using Silicon-Based Semiconductors and Earth-Abundant Catalysts". Science 334 (6056): 645–648. doi:10.1126/science.1209816. PMID 21960528. Bibcode: 2011Sci...334..645R.
48. ↑ Van Noorden, Richard (2012). "'Artificial leaf' faces economic hurdle". Nature. doi:10.1038/nature.2012.10703. http://www.nature.com/news/artificial-leaf-faces-economic-hurdle-1.10703.
49. ↑ "Energy and Environment Policy Case for a Global Project on Artificial Photosynthesis". Energy and Environmental Science 6 (3): 695–698. 2013. doi:10.1039/C3EE00063J.
50. ↑ Towards Global Artificial Photosynthesis Lord Howe Island 2011 "Artificial Photosynthesis". https://law.anu.edu.au/conferences/artificial-photosynthesis. published in Australian Journal of Chemistry Volume 65 Number 6 2012 as 'Artificial Photosynthesis: Energy, Nanochemistry, and Governance'
51. ↑ Do We Need a Global Project on Artificial Photosynthesis? published in Interface Focus Vol 5(3) June 2015
52. ↑ Global Artificial Photosynthesis- Breakthroughs for the Sustainocene Canberra and Lord Howe island 2016. medicalschool.anu.edu.au
53. ↑ 53.0 53.1 Kalyanasundaram, K.; Grätzel, M. (June 2010). "Artificial photosynthesis: biomimetic approaches to solar energy conversion and storage". Current Opinion in Biotechnology 21 (3): 298–310. doi:10.1016/j.copbio.2010.03.021. PMID 20439158.
54. ↑ Andrei, Virgil; Ucoski, Geani M.; Pornrungroj, Chanon; Uswachoke, Chawit; Wang, Qian; Achilleos, Demetra S.; Kasap, Hatice; Sokol, Katarzyna P. et al. (2022-08-17). "Floating perovskite-BiVO4 devices for scalable solar fuel production". Nature 608 (7923): 518–522. doi:10.1038/s41586-022-04978-6. PMID 35978127. Bibcode: 2022Natur.608..518A. https://www.repository.cam.ac.uk/bitstreams/7787036d-4bad-4347-8c8e-7afbc6dbbb88/download.
55. ↑ Lavars, Nick (2021-10-19). "Encasing algae triples the efficiency of artificial photosynthesis" (in en-US). https://newatlas.com/energy/algae-artificial-photosynthesis-efficiency-liquid-crystal-ntu/.
56. ↑ "[NiFe] and [FeFe] Hydrogenases Studied by Advanced Magnetic Resonance Techniques". Chemical Reviews 107 (10): 4331–4365. 2007. doi:10.1021/cr050186q. PMID 17845059.
57. ↑ Fontecilla-Camps, Juan C.; Volbeda, Anne; Cavazza, Christine; Nicolet, Yvain (2007). "Structure/Function Relationships of [NiFe]- and [FeFe]-Hydrogenases". Chemical Reviews 107 (10): 4273–4303. doi:10.1021/cr050195z. PMID 17850165.
58. ↑ Tard, Cédric; Pickett, Christopher J. (2009). "Structural and Functional Analogues of the Active Sites of the [Fe]-, [NiFe]-, and [FeFe]-Hydrogenases". Chemical Reviews 109 (6): 2245–2274. doi:10.1021/cr800542q. PMID 19438209.
59. ↑ Tard, Cédric; Liu, Xiaoming; Ibrahim, Saad K.; Bruschi, Maurizio; De Gioia, Luca; Davies, Siân C.; Yang, Xin; Wang, Lai-Sheng et al. (2005). "Synthesis of the H-cluster framework of iron-only hydrogenase". Nature 433 (7026): 610–613. doi:10.1038/nature03298. PMID 15703741. Bibcode: 2005Natur.433..610T.
60. ↑ Heyduk, Alan F.; Nocera (31 August 2001). "Daniel G.". Science 293 (5535): 1639–1641. doi:10.1126/science.1062965. PMID 11533485. Bibcode: 2001Sci...293.1639H.
61. ↑ Hu, Xile; Cossairt, Brandi M.; Brunschwig, Bruce S.; Lewis, Nathan S.; Peters, Jonas C. (2005). "Electrocatalytic hydrogen evolution by cobalt difluoroboryl-diglyoximate complexes". Chemical Communications 37 (37): 4723–4725. doi:10.1039/B509188H. PMID 16175305. https://authors.library.caltech.edu/4825/3/HUXcc05supp.pdf.
62. ↑ Yano, Junko; Kern, Jan; Irrgang, Klaus-Dieter; Latimer, Matthew J.; Bergmann, Uwe; Glatzel, Pieter; Pushkar, Yulia; Biesiadka, Jacek et al. (23 August 2005). "X-ray damage to the Mn4Ca complex in single crystals of photosystem II: A case study for metalloprotein crystallography". Proceedings of the National Academy of Sciences 102 (34): 12047–12052. doi:10.1073/pnas.0505207102. PMID 16103362. Bibcode: 2005PNAS..10212047Y.
63. ↑ Yasufumi, Umena; Kawakami, Keisuke; Shen, Jian-Ren; Kamiya, Nobuo (5 May 2011). "Crystal structure of oxygen-evolving photosystem II at a resolution of 1.9 Å". Nature 473 (7345): 55–60. doi:10.1038/nature09913. PMID 21499260. Bibcode: 2011Natur.473...55U. http://ousar.lib.okayama-u.ac.jp/files/public/4/47455/20160528084139320094/Nature_473_55–60.pdf.
64. ↑ Dismukes, G. Charles; Brimblecombe, Robin; Felton, Greg A. N.; Pryadun, Ruslan S.; Sheats, John E.; Spiccia, Leone; Swiegers, Gerhard F. (2009). "Development of Bioinspired 4O4−Cubane Water Oxidation Catalysts: Lessons from Photosynthesis". Accounts of Chemical Research 42 (12): 1935–1943. doi:10.1021/ar900249x. PMID 19908827.
65. ↑ Zhang, Biaobiao; Sun, Licheng (2019). "Artificial photosynthesis: opportunities and challenges of molecular catalysts". Chemical Society Reviews 48 (7): 2216–2264. doi:10.1039/C8CS00897C. PMID 30895997.
66. ↑ Binod Nepal; Siddhartha Das (2013). "Sustained Water Oxidation by a Catalyst Cage-Isolated in a Metal–Organic Framework". Angew. Chem. Int. Ed. 52 (28): 7224–27. doi:10.1002/anie.201301327. PMID 23729244.
67. ↑ Rebecca E. Hansen; Siddhartha Das (2014). "Biomimetic di-manganese catalyst cage-isolated in a MOF: robust catalyst for water oxidation with Ce(IV), a non-O-donating oxidant". Energy Environ. Sci. 7 (1): 317–322. doi:10.1039/C3EE43040E.
68. ↑ Chemical & Engineering News
69. ↑ Calzaferri, Gion (2010). "Artificial Photosynthesis". Topics in Catalysis 53 (3): 130–140. doi:10.1007/s11244-009-9424-9. https://boris.unibe.ch/5081/1/11244_2009_Article_9424.pdf.
70. ↑ Tabacchi, Gloria; Calzaferri, Gion; Fois, Ettore (2016). "One-dimensional self-assembly of perylene-diimide dyes by unidirectional transit of zeolite channel openings". Chemical Communications 52 (75): 11195–11198. doi:10.1039/C6CC05303C. PMID 27484884. http://pubs.rsc.org/en/content/articlepdf/2016/cc/c6cc05303c.
71. ↑ Calzaferri, Gion; Méallet-Renault, Rachel; Brühwiler, Dominik; Pansu, Robert; Dolamic, Igor; Dienel, Thomas; Adler, Pauline; Li, Huanrong et al. (2011). "Designing Dye–Nanochannel Antenna Hybrid Materials for Light Harvesting, Transport and Trapping". ChemPhysChem 12 (3): 580–594. doi:10.1002/cphc.201000947. PMID 21337487.
72. ↑ Tabacchi, Gloria; Fois, Ettore; Calzaferri, Gion (2015). "Structure of Nanochannel Entrances in Stopcock-Functionalized Zeolite L". Angewandte Chemie International Edition 54 (38): 11112–11116. doi:10.1002/anie.201504745. PMID 26255642. https://figshare.com/articles/Structure_of_nanochannel_entrances_in_stopcock-functionalized_Zeolite_L/3798654.
73. ↑ Ellis J.R. (2010). "Tackling unintelligent design". Nature 463 (7278): 164–165. doi:10.1038/463164a. PMID 20075906. Bibcode: 2010Natur.463..164E.
74. ↑ 74.0 74.1 Dubois, M. Rakowski; Dubois, Daniel L. (2009). "Development of Molecular Electrocatalysts for CO2Reduction and H2Production/Oxidation". Accounts of Chemical Research 42 (12): 1974–1982. doi:10.1021/ar900110c. PMID 19645445.
75. ↑ Lindberg, Pia; Schûtz, Kathrin; Happe, Thomas; Lindblad, Peter (November–December 2002). "A hydrogen-producing, hydrogenase-free mutant strain of Nostoc punctiforme ATCC 29133". International Journal of Hydrogen Energy 27 (11–12): 1291–1296. doi:10.1016/S0360-3199(02)00121-0.
76. ↑ 76.0 76.1 Lan, Ethan I.; Liao, James C. (July 2011). "Metabolic engineering of cyanobacteria for 1-butanol production from carbon dioxide". Metabolic Engineering 13 (4): 353–363. doi:10.1016/j.ymben.2011.04.004. PMID 21569861.
77. ↑ Kunjapur, Aditya M.; Eldridge, R. Bruce (2010). "Photobioreactor Design for Commercial Biofuel Production from Microalgae". Industrial and Engineering Chemistry Research 49 (8): 3516–3526. doi:10.1021/ie901459u.
78. ↑ Reynolds, Matt. "Scientists Are Trying to Grow Crops in the Dark". Wired. https://www.wired.com/story/plants-growing-in-darkness/. Retrieved 23 July 2022.
79. ↑ Hann, Elizabeth C.; Overa, Sean; Harland-Dunaway, Marcus; Narvaez, Andrés F.; Le, Dang N.; Orozco-Cárdenas, Martha L.; Jiao, Feng; Jinkerson, Robert E. (June 2022). "A hybrid inorganic–biological artificial photosynthesis system for energy-efficient food production". Nature Food 3 (6): 461–471. doi:10.1038/s43016-022-00530-x. PMID 37118051.
80. ↑ Krassen, Henning; Ott, Sascha; Heberle, Joachim (2011). "In vitro hydrogen production—using energy from the sun". Physical Chemistry Chemical Physics 13 (1): 47–57. doi:10.1039/C0CP01163K. PMID 21103567. Bibcode: 2011PCCP...13...47K.
81. ↑ Biello, David; Tiede, David M.; Barber, James; Brudvig, Gary W.; Fleming, Graham; Ghirardi, Maria; Gunner, M. R.; Junge, Wolfgang et al. (13 May 2011). "Plants versus Photovoltaics: Which Are Better to Capture Solar Energy?". Science (Scientific American) 332 (6031): 805–809. doi:10.1126/science.1200165. PMID 21566184. Bibcode: 2011Sci...332..805B. http://www.scientificamerican.com/article.cfm?id=plants-versus-photovoltaics-at-capturing-sunlight. Retrieved 17 January 2012.

## External links

* Engineering light-activated metalloproteins to split water at Australia National University
* Daniel Nocera describes new process for storing solar energy at Massachusetts Institute of Technology.
* Paul Alivisatos on Artificial Photosynthesis at Lawrence Berkeley National Laboratory
* Nanocapsules for artificial photosynthesis a Nanowerk News article
* MIT Solar Revolution Project

* v
* t
* e

Emerging technologies

Fields|

| Agriculture|

* Agricultural robot
* Cellular agriculture
* Closed ecological systems
* Cultured meat
* Genetically modified food
* Precision agriculture
* Vertical farming

|

Architecture|

* Arcology
* Building printing
* Contour crafting
* Domed city

Biomedical|

* Artificial uterus
* Ampakine
* Brain transplant
* Cryonics
* Cryoprotectant
* Cryopreservation
* Vitrification
* Suspended animation
* De-extinction
* Genetic engineering
* Gene therapy
* Head transplant
* Isolated brain
* Life extension
* Strategies for Engineered Negligible Senescence
* Nanomedicine
* Nanosensors
* Organ printing
* Personalized medicine
* Regenerative medicine
* Stem-cell therapy
* Tissue engineering
* Robot-assisted surgery
* Synthetic biology
* Synthetic genomics
* Virotherapy
* Oncolytic virus
* Tricorder
* Whole genome sequencing

Displays|

| Next generation|

* FED
* FLCD
* iMoD
* Laser
* LPD
* OLED
* OLET
* QD-LED
* SED
* TPD
* TDEL
* TMOS
* MicroLED

|

Screenless|

* Bionic contact lens
* Head-mounted display
* Head-up display
* Optical head-mounted display
* Virtual retinal display

Other|

* Autostereoscopy
* Flexible display
* Holographic display
* Computer-generated holography
* Multi-primary color display
* Ultra HD
* Volumetric display

Electronics|

* Electronic nose
* E-textiles
* Flexible electronics
* Molecular electronics
* Nanoelectromechanical systems
* Memristor
* Spintronics
* Thermal copper pillar bump
* Twistronics

Energy|

| Production|

* Airborne wind turbine
* Artificial photosynthesis
* Biofuels
* Carbon-neutral fuel
* Concentrated solar power
* Fusion power
* Home fuel cell
* Hydrogen economy
* Methanol economy
* Molten salt reactor
* Nantenna
* Photovoltaic pavement
* Space-based solar power
* Vortex engine

|

Storage|

* Beltway battery
* Compressed air energy storage
* Flywheel energy storage
* Grid energy storage
* Lithium–air battery
* Molten-salt battery
* Nanowire battery
* Research in lithium-ion batteries
* Silicon–air battery
* Thermal energy storage
* Ultracapacitor

Other|

* Smart grid
* Wireless power

Information and
communications

* Ambient intelligence
* Internet of things
* Artificial intelligence
* Applications of artificial intelligence
* Progress in artificial intelligence
* Machine translation
* Mobile translation
* Machine vision
* Semantic Web
* Speech recognition
* Atomtronics
* Carbon nanotube field-effect transistor
* Cybermethodology
* Fourth-generation optical discs
* 3D optical data storage
* Holographic data storage
* GPGPU
* Memory
* CBRAM
* FRAM
* Millipede
* MRAM
* NRAM
* PRAM
* Racetrack memory
* RRAM
* SONOS
* Optical computing
* RFID
* Chipless RFID
* Software-defined radio
* Three-dimensional integrated circuit

Manufacturing|

* 3D printing
* Claytronics
* Molecular assembler
* Utility fog

Materials science|

* Aerogel
* Amorphous metal
* Artificial muscle
* Conductive polymer
* Femtotechnology
* Fullerene
* Graphene
* High-temperature superconductivity
* High-temperature superfluidity
* Linear acetylenic carbon
* Metamaterials
* Metamaterial cloaking
* Metal foam
* Multi-function structures
* Nanotechnology
* Carbon nanotubes
* Molecular nanotechnology
* Nanomaterials
* Picotechnology
* Programmable matter
* Quantum dots
* Silicene
* Superalloy
* Synthetic diamond

Military|

* Antimatter weapon
* Caseless ammunition
* Directed-energy weapon
* Laser
* Maser
* Particle-beam weapon
* Sonic weapon
* Coilgun
* Railgun
* Plasma weapon
* Pure fusion weapon
* Stealth technology
* Vortex ring gun

Neuroscience|

* Artificial brain
* Brain–computer interface
* Electroencephalography
* Mind uploading
* Brain-reading
* Neuroinformatics
* Neuroprosthetics
* Bionic eye
* Brain implant
* Exocortex
* Retinal implant

Quantum|

* Quantum algorithms
* Quantum amplifier
* Quantum bus
* Quantum channel
* Quantum circuit
* Quantum complexity theory
* Quantum computing
* Quantum cryptography
* Quantum dynamics
* Quantum electronics
* Quantum error correction
* Quantum imaging
* Quantum information
* Quantum key distribution
* Quantum logic
* Quantum logic gates
* Quantum machine
* Quantum machine learning
* Quantum metamaterial
* Quantum metrology
* Quantum network
* Quantum neural network
* Quantum optics
* Quantum programming
* Quantum sensing
* Quantum simulator
* Quantum teleportation

Robotics|

* Domotics
* Nanorobotics
* Powered exoskeleton
* Self-reconfiguring modular robot
* Swarm robotics
* Uncrewed vehicle

Space science|

| Launch|

* Fusion rocket
* Non-rocket spacelaunch
* Mass driver
* Orbital ring
* Skyhook
* Space elevator
* Space fountain
* Space tether
* Reusable launch system

|

Propulsion|

* Beam-powered propulsion
* Ion thruster
* Laser propulsion
* Plasma propulsion engine
* Helicon thruster
* VASIMR
* Nuclear pulse propulsion
* Solar sail

Other|

* Interstellar travel
* Propellant depot
* Laser communication in space

Transport|

| Aerial|

* Adaptive compliant wing
* Backpack helicopter
* Delivery drone
* Flying car
* High-altitude platform
* Jet pack
* Pulse detonation engine
* Scramjet
* Spaceplane
* Supersonic transport

|

Land|

* Airless tire
* Alternative fuel vehicle
* Hydrogen vehicle
* Driverless car
* Ground effect train
* Hyperloop
* Maglev train
* Personal rapid transit
* Transit Elevated Bus
* Vactrain
* Vehicular communication systems

Pipeline|

* Pneumatic transport
* Automated vacuum collection

Other|

* Anti-gravity
* Cloak of invisibility
* Digital scent technology
* Force field
* Plasma window
* Immersive virtual reality
* Magnetic refrigeration
* Phased-array optics

Topics|

* Collingridge dilemma
* Differential technological development
* Disruptive Innovation
* Ephemeralization
* Exploratory engineering
* Fictional technology
* Proactionary principle
* Technological change
* Technological unemployment
* Technological convergence
* Technological evolution
* Technological paradigm
* Technology forecasting
* Accelerating change
* Moore's law
* Technological singularity
* Technology scouting
* Technology readiness level
* Technology roadmap
* Transhumanism

* Category
* List

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Artificial photosynthesis. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Artificial_photosynthesis&oldid=408914"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template