Polyatomic ion

Short description: Ion containing two or more atoms

An electrostatic potential map of the nitrate ion (NO−
3). Areas coloured translucent red, around the outside of the red oxygen atoms themselves, signify the regions of most negative electrostatic potential.

A polyatomic ion (also known as a molecular ion) is a covalent bonded set of two or more atoms, or of a metal complex, that can be considered to behave as a single unit and that usually has a net charge that is not zero,[1] or in special case of zwitterion wear spatially separated charges where the net charge may be variable depending on acidity conditions. The term molecule may or may not be used to refer to a polyatomic ion, depending on the definition used. The prefix poly- carries the meaning "many" in Greek, but even ions of two atoms are commonly described as polyatomic.[2] There may be more than one atom in the structure that has non-zero charge, therefore the net charge of the structure may have a cationic (positive) or anionic nature depending on those atomic details.

In older literature, a polyatomic ion may instead be referred to as a radical (or less commonly, as a radical group). In contemporary usage, the term radical refers to various free radicals, which are species that have an unpaired electron and need not be charged.[3]

A simple example of a polyatomic ion is the hydroxide ion, which consists of one oxygen atom and one hydrogen atom, jointly carrying a net charge of −1; its chemical formula is OH−
. In contrast, an ammonium ion consists of one nitrogen atom and four hydrogen atoms, with a charge of +1; its chemical formula is NH+

Polyatomic ions often are useful in the context of acid–base chemistry and in the formation of salts.

Often, a polyatomic ion can be considered as the conjugate acid or base of a neutral molecule. For example, the conjugate base of sulfuric acid (H2SO4) is the polyatomic hydrogen sulfate anion (HSO−
4). The removal of another hydrogen ion produces the sulfate anion (SO2−
4).

## Contents

* 1 Nomenclature of polyatomic anions
* 1.1 Naming oxyanions
* 2 Other examples of common polyatomic ions
* 3 Zwitterion and polycharged polyatomic ions
* 4 Applications
* 5 See also
* 6 References
* 7 External links

## Nomenclature of polyatomic anions

There are several patterns that can be used for learning the nomenclature of polyatomic anions. First, when the prefix bi is added to a name, a hydrogen is added to the ion's formula and its charge is increased by 1, the latter being a consequence of the hydrogen ion's +1 charge. An alternative to the bi- prefix is to use the word hydrogen in its place: the anion derived from H+
. For example, let us consider the carbonate(CO2−
3) ion:

\+ CO2−
3 → HCO−

which is called either bicarbonate or hydrogen carbonate. The process that forms these ions is called protonation.

### Naming oxyanions

Most of the common polyatomic anions are oxyanions, conjugate bases of oxyacids (acids derived from the oxides of non-metallic elements). For example, the sulfate anion, SO2−
4, is derived from H
2SO
4, which can be regarded as SO
3 \+ H
2O.

The second rule is based on the oxidation state of the central atom in the ion, which in practice is often (but not always) directly related to the number of oxygen atoms in the ion, following the pattern shown below. The following table shows the chlorine oxyanion family:

Oxidation state  | −1  | +1  | +3  | +5  | +7

|
|
|
|
|

Anion name  | chloride | hypochlorite | chlorite | chlorate | perchlorate
Formula  | Cl−
| ClO−
| ClO−
2 | ClO−
3 | ClO−

Structure  |  |  |  |  |

As the number of oxygen atoms bound to chlorine increases, the chlorine's oxidation number becomes more positive. This gives rise to the following common pattern: first, the -ate ion is considered to be the base name; adding a per- prefix adds an oxygen (or otherwise increases the oxidation state), while changing the -ate suffix to -ite will reduce the oxygens by one, and keeping the suffix -ite and adding the prefix hypo- reduces the number of oxygens by one more, all without changing the charge. The naming pattern follows within many different oxyanion series based on a standard root for that particular series. The -ite has one less oxygen than the -ate, but different -ate anions might have different numbers of oxygen atoms.

Generally, the change in prefix corresponds to a change in oxidation state. The main exception is the per- prefix, as only halogens and some transition metals can be oxidized to the +7 or greater oxidation states that would normally use per-. For other elements, it is used as shorthand for peroxy-, which has the same oxidation state as the prior -ate anion, but contains a peroxide group instead of a single oxygen. There are also cases where the oxidation state increases but the number of oxygen atoms does not, such as the oxidation of manganate (MnO2−
4) to permanganate (MnO−
4).

Some oxyanions form dimers, usually by losing an equivalent of oxide. These anions are given the prefix di- or pyro- (as many can be prepared by heating).[4] These anions contain X–O–X bonds, and are structurally related to acid anhydrides of the conjugate acid. The pyro- prefix is only used for these kinds of dimers; others, such as hyponitrite, contain different bond structures despite having a formula that suggests it is "made" of two nitroxide units.

The following table shows the patterns of ion naming for some common ions and their derivatives. Exceptions to the rules are highlighted in yellow, while anions too unstable to exist are marked out with a red "none".

Element  | Type of anion  | Reduced anion  | hypo- | -ite | -ate | per- or peroxy-

|
|
|
|
|
|

Chlorine | All  | Chloride | Cl−
| Hypochlorite | ClO−
| Chlorite | ClO−
2 | Chlorate | ClO−
3 | Perchlorate | ClO−

Nitrogen | Simple anion  | Nitride | N3− | Template:CellCategory | Template:CellCategory | Nitrite | NO−
2 | Nitrate | NO−
3 | Peroxynitrate | NO−

Dimer | Template:CellCategory | Template:CellCategory | Template:CellCategory | Template:CellCategory | None  | None  | None
Sulfur | Simple anion  | Sulfide | S2− | Template:CellCategory | Template:CellCategory | Sulfite | SO2−
3 | Sulfate | SO2−
4 | Persulfate or peroxysulfate | SO2−

Protonated  | Bisulfide | HS−
| Hydrogen sulfoxylate | HSO−
2 | Bisulfite or hydrogen sulfite | HSO−
3 | Bisulfate or hydrogen sulfate | HSO−
4 | Hydrogen persulfate | HSO−

Dimer  | Disulfide | S2−
2 | None | Pyrosulfite or disulfite | S
2O2−
5 | Pyrosulfate or disulfate | S
2O2−
7 | Peroxydisulfate | S
2O2−

Phosphorus | Simple anion  | Phosphide | P3− | None  | None  | Phosphate or orthophosphate | PO3−
4 | Peroxymonophosphate | PO3−

Protonated once  | None  | None  | Template:CellCategory | Template:CellCategory | Hydrogen phosphate | HPO2−
4 | Hydrogen peroxymonophosphate | HPO2−

Protonated twice  | Template:CellCategory | Template:CellCategory | Template:CellCategory | Template:CellCategory | Hydrogen phosphite | H
2PO−
3 | Dihydrogen phosphate | H
2PO−
4 | Dihydrogen peroxymonophosphate | H
2PO−

Dimer  | No dimer; many other polyphosphides | P2−
4, P3−
7, P3−
11, etc.  | None  | Diphosphite or pyrophosphite | H

2O2−
5 | Diphosphate or pyrophosphate | P
2O4−
7 | Peroxydiphosphate | P
4O4−

## Other examples of common polyatomic ions

The following tables give additional examples of commonly encountered polyatomic ions in various categories. Only a few representatives are given, as the number of polyatomic ions encountered in practice is very large.

Anions  Inorganic carbon anions  | Alkoxides | Carboxylates | Transition metal oxyanions  | Other notable anions

|
|
|
|

Carbonate | CO2−
3 | Methoxide (methanolate) | CH
3O−
| Formate (methanoate) | HCOO−
| Manganate | MnO2−
4 | Hydroxide | OH−

Bicarbonate or hydrogen carbonate | HCO−
3 | Ethoxide (ethanolate) | CH
3CH
2O−
or C

5O−
| Acetate (ethanoate) | CH
3COO−
or C

3O−
| Permanganate | MnO−
4 | Peroxide | O2−

Acetylide | C2−
2 | Phenolate | C

5O−
| Benzoate | C

5COO−
or C

5O−
2 | Chromate | CrO2−
4 | Superoxide | O−

Cyanide | CN−
| tert-Butoxide | (CH

3CO−
| Oxalate | C
2O2−
4 | Dichromate | Cr
2O2−
7 | Azanide | NH−

Cyanate | OCN−
|  | Citrate | C

5O3−
7 | Orthotungstate | WO2−
4 | Orthosilicate | SiO4−

Thiocyanate | SCN−
|  |  | Borohydride | BH−

Cations  Onium ions | Carbenium ions | Others

|
|

Guanidinium | C(NH
2)+
3 | Tropylium | C
7H+
7 | Mercury(I) | Hg2+

Ammonium | NH+
4 | Triphenylcarbenium | (C

3C+
| Dihydrogen | H+

Phosphonium | PH+
4 | Cyclopropenium | C
3H+
3 |  |
Hydronium | H
3O+
| Trifluoromethyl | CF+
3 |  |
Fluoronium | H
2F+
|  |  |  |
Pyrylium | C

5O+
|  |  |  |
Sulfonium | H
3S+
|  |  |  |

## Zwitterion and polycharged polyatomic ions

Many polyatomic molecules can carry spatially separated charges, forming polycharged polyatomic ions. An important case of these compounds are zwitterions, which are neutral compounds but have opposing formal charges within the same molecule.[5] A typical example are amino acids, which carry both charged amino and carboxyl groups. These charges can influence the chemical[6] and physical properties of substances.[7]

Many zwitterions exhibit tautomerism with a "parent" molecule without formal charges. For example, glycine reversibly converts between the parent molecule and a zwitterionic form by transfer of a labile hydrogen atom between the protonated amino group and carboxylate group.[8] By contrast, trimethylglycine has three non-labile methyl groups, making quaternary ammonium, so it does not interconvert with the non-zwitterionic isomer (a dimethylglycine ester). These non-tautomeric zwitterions are called betaines.[9]

## Applications

Polyatomic ion structure may influence thin film growth.[10] Analyses of polyatomic ion composition is key point in mass-spectrometry.[11][12][13]

## See also

* Monatomic ion
* Protonation
* Onium ion

## References

1. ↑ Petrucci, Ralph H.; Herring, F. Geoffrey; Madura, Jeffry D.; Bissonnette, Carey (2017). General chemistry: principles and modern applications (Eleventh ed.). Toronto: Pearson. p. A50. ISBN 978-0-13-293128-1.
2. ↑ "Ionic Compounds Containing Polyatomic Ions". https://www.chem.purdue.edu/gchelp/nomenclature/poly_atom.htm.
3. ↑ "IUPAC - radical (free radical) (R05066)". https://goldbook.iupac.org/terms/view/R05066.
4. ↑ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006-) "pyro". doi:10.1351/goldbook.P04959
5. ↑ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006-) "Zwitterions". doi:10.1351/goldbook.Z06752
6. ↑ Pizzi, Andrea; Dhaka, Arun; Beccaria, Roberta; Resnati, Giuseppe (2024-07-01). "Anion⋯anion self-assembly under the control of σ- and π-hole bonds" (in en). Chemical Society Reviews 53 (13): 6654–6674. doi:10.1039/D3CS00479A. ISSN 1460-4744. PMID 38867604.
7. ↑ Novikov, Anton P.; Safonov, Alexey V.; German, Konstantin E.; Grigoriev, Mikhail S. (2023-12-18). "What kind of interactions we may get moving from zwitter to "dritter" ions: C–O⋯Re(O4) and Re–O⋯Re(O4) anion⋯anion interactions make structural difference between L-histidinium perrhenate and pertechnetate" (in en). CrystEngComm 26 (1): 61–69. doi:10.1039/D3CE01164J. ISSN 1466-8033. Bibcode: 2023CEG....26...61N. https://pubs.rsc.org/en/content/articlelanding/2024/ce/d3ce01164j.
8. ↑ Tuñón, Iñaki; Silla, Estanislao; Ruiz-López, Manuel F. (2000). "On the tautomerization process of glycine in aqueous solution". Chemical Physics Letters 321 (5–6): 433–437. doi:10.1016/S0009-2614(00)00365-1. Bibcode: 2000CPL...321..433T.
9. ↑ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006-) "Betaines". doi:10.1351/goldbook.B00637
10. ↑ Wijesundara, Muthu B. J.; Ji, Yuan; Ni, Boris; Sinnott, Susan B.; Hanley, Luke (2000-11-01). "Effect of polyatomic ion structure on thin-film growth: Experiments and molecular dynamics simulations". Journal of Applied Physics 88 (9): 5004–5016. doi:10.1063/1.1315329. ISSN 0021-8979. https://pubs.aip.org/aip/jap/article-abstract/88/9/5004/486174/Effect-of-polyatomic-ion-structure-on-thin-film?redirectedFrom=fulltext.
11. ↑ Boulicault, Jean E.; Alves, Sandra; Cole, Richard B. (2016-08-01). "Negative Ion MALDI Mass Spectrometry of Polyoxometalates (POMs): Mechanism of Singly Charged Anion Formation and Chemical Properties Evaluation". Journal of the American Society for Mass Spectrometry 27 (8): 1301–1313. doi:10.1007/s13361-016-1400-6. https://pubs.acs.org/doi/abs/10.1007/s13361-016-1400-6.
12. ↑ Ehlers, A. W.; de Koster, C. G.; Meier, Robert J.; Lammertsma, K. (2001-09-01). "MALDI-TOF-MS of Saturated Polyolefins by Coordination of Metal Cations: A Theoretical Study". The Journal of Physical Chemistry A 105 (38): 8691–8695. doi:10.1021/jp010627j. ISSN 1089-5639. https://pubs.acs.org/doi/abs/10.1021/jp010627j.
13. ↑ Roithová, Jana; Schröder, Detlef (2010-02-10). "Selective Activation of Alkanes by Gas-Phase Metal Ions". Chemical Reviews 110 (2): 1170–1211. doi:10.1021/cr900183p. ISSN 0009-2665. https://pubs.acs.org/doi/10.1021/cr900183p.

## External links

* General Chemistry Online: Companion Notes: Compounds: Polyatomic ions
* List of polyatomic ions
* Tables of Common Polyatomic Ions, including PDB files

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Polyatomic ion. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Polyatomic_ion&oldid=3843919"