Error diffusion

Short description: Type of halftoning

Error diffusion is a type of halftoning in which the quantization residual is distributed to neighboring pixels that have not yet been processed. Its main use is to convert a multi-level image into a binary image, though it has other applications.

Unlike many other halftoning methods, error diffusion is classified as an area operation, because what the algorithm does at one location influences what happens at other locations. This means buffering is required, and complicates parallel processing. Point operations, such as ordered dither, do not have these complications.

Error diffusion has the tendency to enhance edges in an image. This can make text in images more readable than in other halftoning techniques.

An error-diffused image

## Contents

* 1 Early history
* 2 Digital era
* 2.1 Floyd-Steinberg
* 2.2 Jarvis, Judice and Ninke
* 2.3 Ostromoukhov's Variable Error Diffusion
* 3 Algorithm description
* 3.1 One-dimensional error diffusion
* 3.2 Two-dimensional error diffusion
* 3.3 Color error diffusion
* 3.4 Error diffusion with several gray levels
* 3.5 Printer considerations
* 3.6 Edge enhancement versus lightness preservation
* 4 See also
* 5 References
* 6 External links

## Early history

Richard Howland Ranger received United States patent 1790723 for his invention, "Facsimile system". The patent, which issued in 1931, describes a system for transmitting images over telephone or telegraph lines, or by radio.[1] Ranger's invention permitted continuous-tone photographs to be converted first into black and white, then transmitted to remote locations, which had a pen moving over a piece of paper. To render black, the pen was lowered to the paper; to produce white, the pen was raised. Shades of gray were rendered by intermittently raising and lowering the pen, depending upon the luminance of the gray desired.

Ranger's invention used capacitors to store charges, and vacuum tube comparators to determine when the present luminance, plus any accumulated error, was above a threshold (causing the pen to be raised) or below (causing the pen to be lowered). In this sense, it was an analog version of error diffusion.

## Digital era

### Floyd-Steinberg

Floyd and Steinberg described a system for performing error diffusion on digital images based on a simple kernel[2]

116[−#7351]

where "−" denotes a pixel in the current row which has already been processed (hence diffusing error to it would be pointless), and "#" denotes the pixel currently being processed. "−" can be seen as no error diffused or "0"

A variant called Atkinson dithering was devised by Bill Atkinson and used on the early Macintosh computers that had 1-bit black-and-white displays. This variant only propagates ​3⁄4 of the error.

### Jarvis, Judice and Ninke

Nearly concurrently, J. F. Jarvis, C. N. Judice, and W. H. Ninke of Bell Labs disclosed a similar method, which they termed "minimized average error" using a larger kernel[3]

148[−−#753575313531]

### Ostromoukhov's Variable Error Diffusion

Later, Victor Ostromoukhov introduced a variable error diffusion method, which enhances dithering quality by dynamically adjusting the diffusion coefficients based on the color values of the pixel’s RGB channels.[4]

The algorithm employs a serpentine scan instead of a traditional raster scan and modifies the error buffer, leading to better dithering results.

According to his paper, this technique achieves a blue-noise characteristic while maintaining lower computational complexity. However, despite its advantages, the method did not gain widespread adoption at the time and was largely forgotten in later years.

1sum[−#RDLD−]

where "R" denotes the right weight, "DL" denotes the down-left weight, "D" denotes the down weight, and "sum" represents the total of all weights.

## Algorithm description

Error diffusion takes a monochrome or color image and reduces the number of quantization levels.[5][6] A popular application of error diffusion involves reducing the number of quantization states to just two per channel. This makes the image suitable for printing on binary printers such as black and white laser printers.

In the discussion which follows, it is assumed that the number of quantization states in the error diffused image is two per channel, unless otherwise stated.

### One-dimensional error diffusion

The simplest form of the algorithm scans the image one row at a time and one pixel at a time. The current pixel is compared to a half-gray value. If it is above the value a white pixel is generated in the resulting image. If the pixel is below the half way brightness, a black pixel is generated. Different methods may be used if the target palette is not monochrome, such as thresholding with two values if the target palette is black, gray and white. The generated pixel is either full bright, or full black, so there is an error in the image. The error is then added to the next pixel in the image and the process repeats.

The kernel for one-dimensional error diffusion is

1[#1−−]

Or vertically

1[#−1−]

### Two-dimensional error diffusion

One-dimensional error diffusion tends to have severe image artifacts that show up as distinct vertical lines. Two-dimensional error diffusion reduces the visual artifacts. The simplest algorithm is exactly like one-dimensional error diffusion, except that half the error is added to the next pixel, and half of the error is added to the pixel on the next line below.

The kernel for two-dimensional error diffusion is

12[#11−]

Further refinements can be made by:

\- Dispersing the error over a larger area (as seen in the matrices in the "Digital era" section).

\- Using a serpentine scan to reduce more artifacts.

The sample image at the start of this article is an example of two-dimensional error diffusion.

### Color error diffusion

The same algorithms may be applied to each of the red, green, and blue (or cyan, magenta, yellow, black) channels of a color image to achieve a color effect on printers such as color laser printers that can only print single color values.

However, better visual results may be obtained by first converting the color channels into a perceptive color model that will separate lightness, hue and saturation channels, so that a higher weight for error diffusion will be given to the lightness channel, than to the hue channel. The motivation for this conversion is that human vision better perceives small differences of lightness in small local areas, than similar differences of hue in the same area, and even more than similar differences of saturation on the same area.

For example, if there is a small error in the green channel that cannot be represented, and another small error in the red channel in the same case, the properly weighted sum of these two errors may be used to adjust a perceptible lightness error, that can be represented in a balanced way between all three color channels (according to their respective statistical contribution to the lightness), even if this produces a larger error for the hue when converting the green channel. This error will be diffused in the neighboring pixels.

In addition, gamma correction may be needed on each of these perceptive channels, if they don't scale linearly with the human vision, so that error diffusion can be accumulated linearly to these gamma-corrected linear channels, before computing the final color channels of the rounded pixel colors, using a reverse conversion to the native non gamma-corrected image format and from which the new residual error will be computed and converted again to be distributed to the next pixels.

### Error diffusion with several gray levels

Error Diffusion may also be used to produce output images with more than two levels (per channel, in the case of color images). This has application in displays and printers which can produce 4, 8, or 16 levels in each image plane, such as electrostatic printers and displays in compact mobile telephones. Rather than use a single threshold to produce binary output, the closest permitted level is determined, and the error, if any, is diffused as described above.

### Printer considerations

Most printers overlap the black dots slightly, so there is not an exact one-to-one relationship to dot frequency (in dots per unit area) and lightness. Tone scale linearization may be applied to the source image to get the printed image to look correct.

### Edge enhancement versus lightness preservation

When an image has a transition from light to dark, the error-diffusion algorithm tends to make the next generated pixel be black. Dark-to-light transitions tend to result in the next generated pixel being white. This causes an edge-enhancement effect at the expense of gray-level reproduction accuracy. This results in error diffusion having a higher apparent resolution than other halftone methods. This is especially beneficial with images with text in them, such as the typical facsimile.

This effect shows fairly well in the picture at the top of this article. The grass detail and the text on the sign is well preserved, and the lightness in the sky, containing little detail. A cluster-dot halftone image of the same resolution would be much less sharp.

## See also

* Floyd–Steinberg dithering
* Halftone

## References

1. ↑ Richard Howland Ranger, "Facsimile system". United States Patent 1790723, issued 3 February 1931.
2. ↑ Floyd, Robert W.; Steinberg, Louis (1976). "An Adaptive Algorithm for Spatial Grayscale". Proceedings of the Society for Information Display 17 (2): 75–77.
3. ↑ J. F. Jarvis, C. N. Judice, and W. H. Ninke, "A survey of techniques for the display of continuous tone pictures on bilevel displays". Computer Graphics and Image Processing, 5:1:13–40 (1976).
4. ↑ V. Ostromoukhov, "A Simple and Efficient Error-Diffusion Algorithm". Proceedings of SIGGRAPH 2001.
5. ↑ Wong, Ping Wah (2005). "Image Quantization, Halftoning, and Printing". Handbook of Image and Video Processing. pp. 925–937. doi:10.1016/B978-012119792-6/50117-0. ISBN 978-0-12-119792-6.
6. ↑ Shoop, Barry L.; Sayles, Andre H.; Litynski, Daniel M. (2002). "New Devices for Optoelectronics: Smart Pixels". Fiber Optic Data Communication. pp. 352–421. doi:10.1016/B978-012207892-7/50011-4. ISBN 978-0-12-207892-7.

## External links

* Error diffusion in Matlab

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Error diffusion. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Error_diffusion&oldid=4230533"