Hexafluoride

A hexafluoride is a chemical compound with the general formula QXnF6, QXnF6m−, or QXnF6m+. Many molecules fit this formula. An important hexafluoride is hexafluorosilicic acid (H2SiF6), which is a byproduct of the mining of phosphate rock. In the nuclear industry, uranium hexafluoride (UF6) is an important intermediate in the purification of this element.

## Contents

* 1 Hexafluoride cations
* 2 Hexafluoride anions
* 3 Binary hexafluorides
* 3.1 Binary hexafluorides of the chalcogens
* 3.2 Binary hexafluorides of the noble gases
* 3.3 Binary hexafluorides of the transition metals
* 3.4 Binary hexafluorides of the actinides
* 3.5 Chemical properties of binary hexafluorides
* 3.6 Applications of binary hexafluorides
* 3.7 Predicted binary hexafluorides
* 3.7.1 Radon hexafluoride
* 3.7.2 Others
* 4 Literature
* 5 References
* 6 Sources

## Hexafluoride cations

Cationic hexafluorides exist but are rarer than neutral or anionic hexafluorides. Examples are the hexafluorochlorine (ClF6+), and hexafluorobromine (BrF6+) cations.[1]

## Hexafluoride anions

Structure of the hexafluorophosphate anion, PF6−.

Many elements form anionic hexafluorides. Members of commercial interest are hexafluorophosphate (PF6−) and hexafluorosilicate (SiF62−).

Many transition metals form hexafluoride anions. Often the monoanions are generated by reduction of the neutral hexafluorides. For example, PtF6− arises by reduction of PtF6 by O2. Because of its highly basic nature and its resistance to oxidation, the fluoride ligand stabilizes some metals in otherwise rare high oxidation states, such as hexafluorocuprate(IV), CuF2−
6 and hexafluoronickelate(IV), NiF2−

## Binary hexafluorides

Hexafluoride-forming elements Octahedral structure of SF6

Seventeen elements are known to form binary hexafluorides.[2] Nine of these elements are transition metals, three are actinides, four are chalcogens, and one is a noble gas. Most hexafluorides are molecular compounds with low melting and boiling points. Four hexafluorides (S, Se, Te, and W) are gases at room temperature (25 °C) and a pressure of 1 atm, two are liquids (Re, Mo), and the others are volatile solids. The group 6, chalcogen, and noble gas hexafluorides are colourless, but the other hexafluorides have colours ranging from white, through yellow, orange, red, brown, and grey, to black.

The molecular geometry of binary hexafluorides is generally octahedral, although some derivatives are distorted from Oh symmetry. For the main group hexafluorides, distortion is pronounced for the 14-electron noble gas derivatives. Distortions in gaseous XeF6 are caused by its non-bonding lone pair, according to VSEPR theory. In the solid state, it adopts a complex structure involving tetramers and hexamers. According to quantum chemical calculations, ReF6 and RuF6 should have tetragonally distorted structures (where the two bonds along one axis are longer or shorter than the other four), but this has not been verified experimentally.[3]

Polonium hexafluoride is known, but not well-studied. It could not be made from 210Po, but using the longer-lived isotope 208Po and reacting it with fluorine found a volatile product that is almost certainly PoF6.[2] The quoted boiling point in the table below is a prediction.

### Binary hexafluorides of the chalcogens

Compound | Formula | m.p (°C) | b.p. (°C) | subl.p. (°C) | MW | solid ρ (g cm−3) (at m.p.)[4] | Bond distance (pm) | Colour

|
|
|
|
|
|
|
|

Sulfur hexafluoride | SF6 | −50.8 |  | −63.8 | 146.06 | 2.51 (−50 °C) | 156.4 | colourless
Selenium hexafluoride | SeF6 | −34.6 |  | −46.6 | 192.95 | 3.27 | 167–170 | colourless
Tellurium hexafluoride[5] | TeF6 | −38.9 | −37.6 |  | 241.59 | 3.76 | 184 | colourless
Polonium hexafluoride[6][7] | PoF6 |  | ≈ −40? |  | 322.99 |  |  | colourless[7]

### Binary hexafluorides of the noble gases

Compound | Formula | m.p (°C) | b.p. (°C) | subl.p. (°C) | MW | solid ρ (g cm−3) | Bond (pm) | Colour

|
|
|
|
|
|
|
|

Xenon hexafluoride | XeF6 | 49.5 | 75.6 |  | 245.28 | 3.56 |  | colourless (solid)
yellow (gas)

### Binary hexafluorides of the transition metals

Compound | Formula | m.p (°C) | b.p. (°C) | subl.p. (°C) | MW | solid ρ (g cm−3) | Bond (pm) | Colour

|
|
|
|
|
|
|
|

Molybdenum hexafluoride | MoF6 | 17.5 | 34.0 |  | 209.94 | 3.50 (−140 °C)[3] | 181.7[3] | colourless
Technetium hexafluoride | TcF6 | 37.4 | 55.3 |  | (212) | 3.58 (−140 °C)[3] | 181.2[3] | yellow
Ruthenium hexafluoride | RuF6 | 54 |  |  | 215.07 | 3.68 (−140 °C)[3] | 181.8[3] | dark brown
Rhodium hexafluoride | RhF6 | ≈ 70 |  |  | 216.91 | 3.71 (−140 °C)[3] | 182.4[3] | black
Tungsten hexafluoride | WF6 | 2.3 | 17.1 |  | 297.85 | 4.86 (−140 °C)[3] | 182.6[3] | colourless
Rhenium hexafluoride | ReF6 | 18.5 | 33.7 |  | 300.20 | 4.94 (−140 °C)[3] | 182.3[3] | yellow
Osmium hexafluoride | OsF6 | 33.4 | 47.5 |  | 304.22 | 5.09 (−140 °C)[3] | 182.9[3] | yellow
Iridium hexafluoride | IrF6 | 44 | 53.6 |  | 306.21 | 5.11 (−140 °C)[3] | 183.4[3] | yellow
Platinum hexafluoride | PtF6 | 61.3 | 69.1 |  | 309.07 | 5.21 (−140 °C)[3] | 184.8[3] | deep red

### Binary hexafluorides of the actinides

Compound | Formula | m.p (°C) | b.p. (°C) | subl.p. (°C) | MW | solid ρ (g cm−3) | Bond (pm) | Colour

|
|
|
|
|
|
|
|

Uranium hexafluoride | UF6 | 64.052 |  | 56.5 | 351.99 | 5.09 | 199.6 | colorless
Neptunium hexafluoride | NpF6 | 54.4 | 55.18 |  | (351) |  | 198.1 | orange
Plutonium hexafluoride | PuF6 | 52 | 62 |  | (358) | 5.08 | 197.1 | brown

### Chemical properties of binary hexafluorides

The hexafluorides have a wide range of chemical reactivity. Sulfur hexafluoride is nearly inert and non-toxic due to steric hindrance (the six fluorine atoms are arranged so tightly around the sulfur atom that it is extremely difficult to attack the bonds between the fluorine and sulfur atoms). It has several applications due to its stability, dielectric properties, and high density. Selenium hexafluoride is nearly as unreactive as SF6, but tellurium hexafluoride is not very stable and can be hydrolyzed by water within 1 day. Also, both selenium hexafluoride and tellurium hexafluoride are toxic, while sulfur hexafluoride is non-toxic. In contrast, metal hexafluorides are corrosive, readily hydrolyzed, and may react violently with water. Some of them can be used as fluorinating agents. The metal hexafluorides have a high electron affinity, which makes them strong oxidizing agents.[8] Platinum hexafluoride in particular is notable for its ability to oxidize the dioxygen molecule, O2, to form dioxygenyl hexafluoroplatinate, and for being the first compound that was observed to react with xenon (see xenon hexafluoroplatinate).

### Applications of binary hexafluorides

Some metal hexafluorides find applications due to their volatility. Uranium hexafluoride is used in the uranium enrichment process to produce fuel for nuclear reactors. Fluoride volatility can also be exploited for nuclear fuel reprocessing. Tungsten hexafluoride is used in the production of semiconductors through the process of chemical vapor deposition.[9]

### Predicted binary hexafluorides

#### Radon hexafluoride

Radon hexafluoride (RnF6), the heavier homologue of xenon hexafluoride, has been studied theoretically,[10] but its synthesis has not yet been confirmed. Higher fluorides of radon may have been observed in experiments where unknown radon-containing products distilled together with xenon hexafluoride, and perhaps in the production of radon trioxide: these may have been RnF4, RnF6, or both.[11] It is likely that the difficulty in identifying higher fluorides of radon stems from radon being kinetically hindered from being oxidised beyond the divalent state. This is due to the strong ionicity of RnF2 and the high positive charge on Rn in RnF+. Spatial separation of RnF2 molecules may be necessary to clearly identify higher fluorides of radon, of which RnF4 is expected to be more stable than RnF6 due to spin–orbit splitting of the 6p shell of radon (RnIV would have a closed-shell 6s26p21/2 configuration).[12] The ionicity of the Rn–F bond may also result in a strongly fluorine-bridged structure in the solid, so that radon fluorides may not be volatile.[2] Continuing the trend, the heavier oganesson hexafluoride should be unbound.[2]

#### Others

Krypton hexafluoride (KrF6) has been predicted to be stable, but has not been synthesised due to the extreme difficulty of oxidising krypton beyond Kr(II).[13] The synthesis of americium hexafluoride (AmF6) by the fluorination of americium(IV) fluoride (AmF4) was attempted in 1990,[14] but was unsuccessful; there have also been possible thermochromatographic identifications of it and curium hexafluoride (CmF6), but it is debated if these are conclusive.[2] Palladium hexafluoride (PdF6), the lighter homologue of platinum hexafluoride, has been calculated to be stable,[15] but has not yet been produced; the possibility of silver (AgF6) and gold hexafluorides (AuF6) has also been discussed.[2] Chromium hexafluoride (CrF6), the lighter homologue of molybdenum hexafluoride and tungsten hexafluoride, was reported, but has been shown to be a mistaken identification of the known pentafluoride (CrF5).[16] CrF6, MnF6, and FeF6 are predicted to exist at 300 GPa.[17]

## Literature

* Galkin, N. P.; Tumanov, Yu. N. (1971). "Reactivity and Thermal Stability of Hexafluorides". Russian Chemical Reviews 40 (2): 154–164. doi:10.1070/RC1971v040n02ABEH001902. Bibcode: 1971RuCRv..40..154G. http://www.turpion.org/php/paper.phtml?journal_id=rc&paper_id=1902. Retrieved 2012-05-12.

## References

1. ↑ Wiberg, Wiberg & Holleman 2001, p. 436.
2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 Seppelt, Konrad (2015). "Molecular Hexafluorides". Chemical Reviews 115 (2): 1296–1306. doi:10.1021/cr5001783. PMID 25418862.
3. ↑ 3.00 3.01 3.02 3.03 3.04 3.05 3.06 3.07 3.08 3.09 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 Drews, T.; Supeł, J.; Hagenbach, A.; Seppelt, K. (2006). "Solid state molecular structures of transition metal hexafluorides". Inorganic Chemistry 45 (9): 3782–3788. doi:10.1021/ic052029f. PMID 16634614.
4. ↑ Wilhelm Klemm and Paul Henkel "Über einige physikalische Eigenschaften von SF6, SeF6, TeF6 und CF4" Z. anorg. allgem. Chem. 1932, vol. 207, pages 73–86. doi:10.1002/zaac.19322070107
5. ↑ "4. Physical Constants of Inorganic Compound". CRC Handbook of Chemistry and Physics (90 ed.). Boca Raton, FL: CRC Press. 2009. pp. 4–95. ISBN 978-1-4200-9084-0.
6. ↑ CAS #35473-38-2
7. ↑ 7.0 7.1 Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils, ed., Inorganic Chemistry, San Diego/Berlin: Academic Press/De Gruyter, p. 594, ISBN 0-12-352651-5
8. ↑ Bartlett, N. (1968). "The Oxidizing Properties of the Third Transition Series Hexafluorides and Related Compounds". Angewandte Chemie International Edition 7 (6): 433–439. doi:10.1002/anie.196804331.
9. ↑ "Tungsten and Tungsten Silicide Chemical Vapor Deposition". http://www.timedomaincvd.com/CVD_Fundamentals/films/W_WSi.html.
10. ↑ Filatov, M.; Cremer, D. (2003). "Bonding in radon hexafluoride: An unusual relativistic problem". Physical Chemistry Chemical Physics 2003 (5): 1103–1105. doi:10.1039/b212460m. Bibcode: 2003PCCP....5.1103F.
11. ↑ Stein, L. (1970). "Ionic Radon Solution". Science 168 (3929): 362–4. doi:10.1126/science.168.3929.362. PMID 17809133. Bibcode: 1970Sci...168..362S.
12. ↑ Liebman, Joel F. (1975). "Conceptual Problems in Noble Gas and Fluorine Chemistry, II: The Nonexistence of Radon Tetrafluoride". Inorg. Nucl. Chem. Lett. 11 (10): 683–685. doi:10.1016/0020-1650(75)80185-1.
13. ↑ Dixon, D. A.; Wang, T. H.; Grant, D. J.; Peterson, K. A.; Christe, K. O.; Schrobilgen, G. J. (2007). "Heats of Formation of Krypton Fluorides and Stability Predictions for KrF4 and KrF6 from High Level Electronic Structure Calculations". Inorganic Chemistry 46 (23): 10016–10021. doi:10.1021/ic701313h. PMID 17941630.
14. ↑ Malm, J. G.; Weinstock, B.; Weaver, E. E. (1958). "The Preparation and Properties of NpF6; a Comparison with PuF6". The Journal of Physical Chemistry 62 (12): 1506–1508. doi:10.1021/j150570a009.
15. ↑ Aullón, G.; Alvarez, S. (2007). "On the Existence of Molecular Palladium(VI) Compounds: Palladium Hexafluoride". Inorganic Chemistry 46 (7): 2700–2703. doi:10.1021/ic0623819. PMID 17326630.
16. ↑ Riedel, S.; Kaupp, M. (2009). "The highest oxidation states of the transition metal elements". Coordination Chemistry Reviews 253 (5–6): 606–624. doi:10.1016/j.ccr.2008.07.014.
17. ↑ Jianyan Lin; Qiuping Yang; Xing Li; Xiaohua Zhang; Fei Li; Guochun Yang (2022). "Pressure-stabilized hexafluorides of first-row transition metals". Physical Chemistry Chemical Physics 24: 1736-1742. doi:10.1039/D1CP04446J.

## Sources

* Wiberg, Egon; Wiberg, Nils; Holleman, Arnold Frederick (2001). Inorganic chemistry. Academic Press. ISBN 978-0-12-352651-9. https://books.google.com/books?id=Mtth5g59dEIC. Retrieved 3 March 2011.

Short description: index of chemical compounds with the same name

This set index page lists chemical compounds articles associated with the same name.
If an internal link led you here, you may wish to change the link to point directly to the intended article.

|

* v
* t
* e

Binary hexafluorides

Known binary hexafluorides|

| Chalcogen binary hexafluorides|

* SF6
* SeF6
* TeF6
* PoF6

|

Noble gas binary hexafluorides|

* XeF6

Transition metal binary hexafluorides|

* MoF6
* TcF6
* RuF6
* RhF6
* WF6
* ReF6
* OsF6
* IrF6
* PtF6

Actinide binary hexafluorides|

* UF6
* NpF6
* PuF6

Predicted binary hexafluorides|

| Noble gas binary hexafluorides|

* KrF6
* RnF6

|

Transition metal binary hexafluorides|

* CrF6
* PdF6

Actinide binary hexafluorides|

* AmF6

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Hexafluoride. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Hexafluoride&oldid=4358275"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template