Contraction (operator theory)

Short description: Bounded operators with sub-unit norm

In operator theory, a bounded operator T: X → Y between normed vector spaces X and Y is said to be a contraction if its operator norm ||T || ≤ 1\. This notion is a special case of the concept of a contraction mapping, but every bounded operator becomes a contraction after suitable scaling. The analysis of contractions provides insight into the structure of operators, or a family of operators. The theory of contractions on Hilbert space is largely due to Béla Szőkefalvi-Nagy and Ciprian Foias.

## Contents

* 1 Contractions on a Hilbert space
* 2 Dilation theorem for contractions
* 3 Dilation theorem for contraction semigroups
* 4 Functional calculus
* 5 C0 contractions
* 6 Quasi-similarity
* 7 See also
* 8 Notes
* 9 References

## Contractions on a Hilbert space

If T is a contraction acting on a Hilbert space ℋ, the following basic objects associated with T can be defined.

The defect operators of T are the operators DT = (1 − T*T)½ and DT* = (1 − TT*)½. The square root is the positive semidefinite one given by the spectral theorem. The defect spaces 𝒟T and 𝒟T* are the closure of the ranges Ran(DT) and Ran(DT*) respectively. The positive operator DT induces an inner product on ℋ. The inner product space can be identified naturally with Ran(DT). A similar statement holds for 𝒟T*.

The defect indices of T are the pair

(dim⁡𝒟T,dim⁡𝒟T*).

The defect operators and the defect indices are a measure of the non-unitarity of T.

A contraction T on a Hilbert space can be canonically decomposed into an orthogonal direct sum

T=Γ⊕U

where U is a unitary operator and Γ is completely non-unitary in the sense that it has no non-zero reducing subspaces on which its restriction is unitary. If U = 0, T is said to be a completely non-unitary contraction. A special case of this decomposition is the Wold decomposition for an isometry, where Γ is a proper isometry.

Contractions on Hilbert spaces can be viewed as the operator analogs of cos θ and are called operator angles in some contexts. The explicit description of contractions leads to (operator-)parametrizations of positive and unitary matrices.

## Dilation theorem for contractions

Sz.-Nagy's dilation theorem, proved in 1953, states that for any contraction T on a Hilbert space H, there is a unitary operator U on a larger Hilbert space K ⊇ H such that if P is the orthogonal projection of K onto H then Tn = P Un P for all n > 0\. The operator U is called a dilation of T and is uniquely determined if U is minimal, i.e. K is the smallest closed subspace invariant under U and U* containing H.

In fact define[1]

ℋ=H⊕H⊕H⊕⋯,

the orthogonal direct sum of countably many copies of H.

Let V be the isometry on ℋ defined by

V(ξ1,ξ2,ξ3,…)=(Tξ1,I−T*Tξ1,ξ2,ξ3,…).

Let

𝒦=ℋ⊕ℋ.

Define a unitary W on 𝒦 by

W(x,y)=(Vx+(I−VV*)y,−V*y).

W is then a unitary dilation of T with H considered as the first component of ℋ⊂𝒦.

The minimal dilation U is obtained by taking the restriction of W to the closed subspace generated by powers of W applied to H.

## Dilation theorem for contraction semigroups

There is an alternative proof of Sz.-Nagy's dilation theorem, which allows significant generalization.[2]

Let G be a group, U(g) a unitary representation of G on a Hilbert space K and P an orthogonal projection onto a closed subspace H = PK of K.

The operator-valued function

Φ(g)=PU(g)P,

with values in operators on K satisfies the positive-definiteness condition

∑λiλj‾Φ(gj−1gi)=PT*TP≥0,

where

T=∑λiU(gi).

Moreover,

Φ(1)=P.

Conversely, every operator-valued positive-definite function arises in this way. Recall that every (continuous) scalar-valued positive-definite function on a topological group induces an inner product and group representation φ(g) = 〈Ug v, v〉 where Ug is a (strongly continuous) unitary representation (see Bochner's theorem). Replacing v, a rank-1 projection, by a general projection gives the operator-valued statement. In fact the construction is identical; this is sketched below.

Let ℋ be the space of functions on G of finite support with values in H with inner product

(f1,f2)=∑g,h(Φ(h−1g)f1(g),f2(h)).

G acts unitarily on ℋ by

U(g)f(x)=f(g−1x).

Moreover, H can be identified with a closed subspace of ℋ using the isometric embedding sending v in H to fv with

fv(g)=δg,1v.

If P is the projection of ℋ onto H, then

PU(g)P=Φ(g),

using the above identification.

When G is a separable topological group, Φ is continuous in the strong (or weak) operator topology if and only if U is.

In this case functions supported on a countable dense subgroup of G are dense in ℋ, so that ℋ is separable.

When G = Z any contraction operator T defines such a function Φ through

Φ(0)=I,Φ(n)=Tn,Φ(−n)=(T*)n,

for n > 0\. The above construction then yields a minimal unitary dilation.

The same method can be applied to prove a second dilation theorem of Sz._Nagy for a one-parameter strongly continuous contraction semigroup T(t) (t ≥ 0) on a Hilbert space H. (Cooper 1947) had previously proved the result for one-parameter semigroups of isometries,[3]

The theorem states that there is a larger Hilbert space K containing H and a unitary representation U(t) of R such that

T(t)=PU(t)P

and the translates U(t)H generate K.

In fact T(t) defines a continuous operator-valued positove-definite function Φ on R through

Φ(0)=I,Φ(t)=T(t),Φ(−t)=T(t)*,

for t > 0\. Φ is positive-definite on cyclic subgroups of R, by the argument for Z, and hence on R itself by continuity.

The previous construction yields a minimal unitary representation U(t) and projection P.

The Hille-Yosida theorem assigns a closed unbounded operator A to every contractive one-parameter semigroup T'(t) through

Aξ=limt↓01t(T(t)−I)ξ,

where the domain on A consists of all ξ for which this limit exists.

A is called the generator of the semigroup and satisfies

−ℜ(Aξ,ξ)≥0

on its domain. When A is a self-adjoint operator

T(t)=eAt,

in the sense of the spectral theorem and this notation is used more generally in semigroup theory.

The cogenerator of the semigroup is the contraction defined by

T=(A+I)(A−I)−1.

A can be recovered from T using the formula

A=(T+I)(T−I)−1.

In particular a dilation of T on K ⊃ H immediately gives a dilation of the semigroup.[4]

## Functional calculus

Let T be totally non-unitary contraction on H. Then the minimal unitary dilation U of T on K ⊃ H is unitarily equivalent to a direct sum of copies the bilateral shift operator, i.e. multiplication by z on L2(S1).[5]

If P is the orthogonal projection onto H then for f in L∞ = L∞(S1) it follows that the operator f(T) can be defined by

f(T)ξ=Pf(U)ξ.

Let H∞ be the space of bounded holomorphic functions on the unit disk D. Any such function has boundary values in L∞ and is uniquely determined by these, so that there is an embedding H∞ ⊂ L∞.

For f in H∞, f(T) can be defined without reference to the unitary dilation.

In fact if

f(z)=∑n≥0anzn

for |z| < 1, then for r < 1

fr(z))=∑n≥0rnanzn

is holomorphic on |z| < 1/r.

In that case fr(T) is defined by the holomorphic functional calculus and f (T ) can be defined by

f(T)ξ=limr->1fr(T)ξ.

The map sending f to f(T) defines an algebra homomorphism of H∞ into bounded operators on H. Moreover, if

f∼(z)=∑n≥0anz‾n,

then

f∼(T)=f(T*)*.

This map has the following continuity property: if a uniformly bounded sequence fn tends almost everywhere to f, then fn(T) tends to f(T) in the strong operator topology.

For t ≥ 0, let et be the inner function

et(z)=exp⁡tz+1z−1.

If T is the cogenerator of a one-parameter semigroup of completely non-unitary contractions T(t), then

T(t)=et(T)

and

T=12I−12∫0∞e−tT(t)dt.

## C0 contractions

A completely non-unitary contraction T is said to belong to the class C0 if and only if f(T) = 0 for some non-zero f in H∞. In this case the set of such f forms an ideal in H∞. It has the form φ ⋅ H∞ where g is an inner function, i.e. such that |φ| = 1 on S1: φ is uniquely determined up to multiplication by a complex number of modulus 1 and is called the minimal function of T. It has properties analogous to the minimal polynomial of a matrix.

The minimal function φ admits a canonical factorization

φ(z)=cB(z)e−P(z),

where |c|=1, B(z) is a Blaschke product

B(z)=∏[|λi|λiλi−z1−λ‾i]mi,

with

∑mi(1−|λi|)<∞,

and P(z) is holomorphic with non-negative real part in D. By the Herglotz representation theorem,

P(z)=∫02π1+e−iθz1−e−iθzdμ(θ)

for some non-negative finite measure μ on the circle: in this case, if non-zero, μ must be singular with respect to Lebesgue measure. In the above decomposition of φ, either of the two factors can be absent.

The minimal function φ determines the spectrum of T. Within the unit disk, the spectral values are the zeros of φ. There are at most countably many such λi, all eigenvalues of T, the zeros of B(z). A point of the unit circle does not lie in the spectrum of T if and only if φ has a holomorphic continuation to a neighborhood of that point.

φ reduces to a Blaschke product exactly when H equals the closure of the direct sum (not necessarily orthogonal) of the generalized eigenspaces[6]

Hi={ξ:(T−λiI)miξ=0}.

## Quasi-similarity

Two contractions T1 and T2 are said to be quasi-similar when there are bounded operators A, B with trivial kernel and dense range such that

AT1=T2A,BT2=T1B.

The following properties of a contraction T are preserved under quasi-similarity:

* being unitary
* being completely non-unitary
* being in the class C0
* being multiplicity free, i.e. having a commutative commutant

Two quasi-similar C0 contractions have the same minimal function and hence the same spectrum.

The classification theorem for C0 contractions states that two multiplicity free C0 contractions are quasi-similar if and only if they have the same minimal function (up to a scalar multiple).[7]

A model for multiplicity free C0 contractions with minimal function φ is given by taking

H=H2⊖φH2,

where H2 is the Hardy space of the circle and letting T be multiplication by z.[8]

Such operators are called Jordan blocks and denoted S(φ).

As a generalization of Beurling's theorem, the commutant of such an operator consists exactly of operators ψ(T) with ψ in H≈, i.e. multiplication operators on H2 corresponding to functions in H≈.

A C0 contraction operator T is multiplicity free if and only if it is quasi-similar to a Jordan block (necessarily corresponding the one corresponding to its minimal function).

Examples.

* If a contraction T if quasi-similar to an operator S with

Sei=λiei

with the λi's distinct, of modulus less than 1, such that

∑(1−|λi|)<1

and (ei) is an orthonormal basis, then S, and hence T, is C0 and multiplicity free. Hence H is the closure of direct sum of the λi-eigenspaces of T, each having multiplicity one. This can also be seen directly using the definition of quasi-similarity.

* The results above can be applied equally well to one-parameter semigroups, since, from the functional calculus, two semigroups are quasi-similar if and only if their cogenerators are quasi-similar.[9]

Classification theorem for C0 contractions: Every C0 contraction is canonically quasi-similar to a direct sum of Jordan blocks.

In fact every C0 contraction is quasi-similar to a unique operator of the form

S=S(φ1)⊕S(φ1φ2)⊕S(φ1φ2φ3)⊕⋯

where the φn are uniquely determined inner functions, with φ1 the minimal function of S and hence T.[10]

## See also

* Contraction mapping - Function reducing distance between all points
* Kallman–Rota inequality
* Stinespring dilation theorem - Theorem
* Hille-Yosida theorem for contraction semigroups

## Notes

1. ↑ Sz.-Nagy et al. 2010, pp. 10–14
2. ↑ Sz.-Nagy et al. 2010, pp. 24–28
3. ↑ Sz.-Nagy et al. 2010, pp. 28–30
4. ↑ Sz.-Nagy et al. 2010, pp. 143, 147
5. ↑ Sz.-Nagy et al. 2010, pp. 87–88
6. ↑ Sz.-Nagy et al. 2010, p. 138
7. ↑ Sz.-Nagy et al. 2010, pp. 395–440
8. ↑ Sz.-Nagy et al. 2010, p. 126
9. ↑ Bercovici 1988, p. 95
10. ↑ Bercovici 1988, pp. 35–66

## References

* Bercovici, H. (1988), Operator theory and arithmetic in H∞, Mathematical Surveys and Monographs, 26, American Mathematical Society, ISBN 0-8218-1528-8
* Cooper, J. L. B. (1947), "One-parameter semigroups of isometric operators in Hilbert space", Ann. of Math. 48 (4): 827–842, doi:10.2307/1969382
* Gamelin, T. W. (1969), Uniform algebras, Prentice-Hall
* Hoffman, K. (1962), Banach spaces of analytic functions, Prentice-Hall
* Sz.-Nagy, B.; Foias, C.; Bercovici, H.; Kérchy, L. (2010), Harmonic analysis of operators on Hilbert space, Universitext (Second ed.), Springer, ISBN 978-1-4419-6093-1
* Riesz, F.; Sz.-Nagy, B. (1995), Functional analysis. Reprint of the 1955 original, Dover Books on Advanced Mathematics, Dover, pp. 466–472, ISBN 0-486-66289-6

* v
* t
* e

Functional analysis (topics)

Topological vector spaces|

* Asplund
* Banach (list)
* Banach lattice
* Barrelled
* Bornological
* Brauner
* F-space
* Fréchet (tame)
* Hilbert (Inner product space
* Polarization identity)
* LF-space
* Locally convex (Seminorms/Minkowski functionals)
* Mackey
* Montel
* Nuclear
* Normed (norm)
* Quasinormed
* Reflexive
* Riesz
* Smith
* Stereotype
* Strictly convex
* Webbed
* Topological tensor product (of Hilbert spaces)

Topologies of function spaces|

* Dual
* Dual space (Dual norm)
* Operator
* Ultraweak
* Weak (polar
* operator)
* Mackey
* Strong (polar
* operator)
* Ultrastrong
* Uniform convergence

Linear operators|

* Adjoint
* Bilinear (form
* operator
* sesquilinear)
* (Un)Bounded
* Closed
* Compact (on Hilbert spaces)
* (Dis)Continuous
* Densely defined
* Fredholm
* Hilbert–Schmidt
* Functionals (positive)
* Normal
* Nuclear
* Self-adjoint
* Strictly singular
* Trace class
* Transpose
* Unitary

Operator theory|

* Banach algebras
* C*-algebras
* Spectrum (C*-algebra
* radius)
* Spectral theory (of ODEs
* Spectral theorem)
* Polar decomposition
* Singular value decomposition

Theorems|

* Banach–Alaoglu
* Banach–Mazur
* Banach–Saks
* Banach–Schauder (open mapping)
* Banach–Steinhaus (Uniform boundedness)
* Bessel's inequality
* Cauchy–Schwarz inequality
* Closed graph
* Closed range
* Eberlein–Šmulian
* Freudenthal spectral
* Gelfand–Mazur
* Gelfand–Naimark
* Goldstine
* Hahn–Banach (hyperplane separation)
* Kakutani fixed-point
* Krein–Milman
* Lomonosov's invariant subspace
* Mackey–Arens
* Mazur's lemma
* M. Riesz extension
* Riesz representation
* Parseval's identity
* Schauder fixed-point

Analysis|

* Abstract Wiener space
* Bochner space
* Differentiation in Fréchet spaces
* Derivatives (Fréchet
* Gateaux
* functional
* holomorphic)
* Integrals (Bochner
* Dunford
* Gelfand–Pettis
* regulated
* Paley–Wiener
* weak)
* Functional calculus (Borel
* continuous
* holomorphic)
* Inverse function theorem (Nash–Moser theorem)
* Measures (Lebesgue
* Projection-valued
* Vector)
* Weakly measurable function

Types of sets|

* Absolutely convex
* Absorbing
* Balanced
* Bounded
* Convex
* Convex cone (subset)
* Linear cone (subset)
* Radial
* Star-shaped
* Symmetric
* Zonotope

Subsets / set operations|

* Algebraic interior (core)
* Bounding points
* Convex hull
* Extreme point
* Interior
* Minkowski addition
* Polar

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Contraction (operator theory). Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Contraction_(operator_theory)&oldid=209395"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template