Cylinder

Short description: Three-dimensional solid

Cylinder

A circular right cylinder of height h and diameter d=2r

Type| Smooth surface
Algebraic surface
χ| 2
Symmetry group| O(2)×O(1)
Surface Area| 2πr(r + h)
Volume| πr2h

A cylinder (from grc κύλινδρος (kúlindros) 'roller, tumbler')[1] has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base.

A cylinder may also be defined as an infinite curvilinear surface in various modern branches of geometry and topology. The shift in the basic meaning—solid versus surface (as in ball and sphere)—has created some ambiguity with terminology. The two concepts may be distinguished by referring to solid cylinders and cylindrical surfaces. In the literature the unadorned term cylinder could refer to either of these or to an even more specialized object, the right circular cylinder.

## Contents

* 1 Types
* 1.1 Right circular cylinders
* 2 Properties
* 2.1 Cylindric sections
* 2.2 Volume
* 2.3 Surface area
* 2.4 Right circular hollow cylinder (cylindrical shell)
* 2.5 On the Sphere and Cylinder
* 3 Cylindrical surfaces
* 3.1 Elliptic cylinder
* 3.2 Hyperbolic cylinder
* 3.3 Parabolic cylinder
* 4 Projective geometry
* 5 Prisms
* 6 See also
* 7 Notes
* 8 References
* 9 External links

## Types

The definitions and results in this section are taken from the 1913 text Plane and Solid Geometry by George A. Wentworth and David Eugene Smith (Wentworth Smith).

A  cylindrical surface is a surface consisting of all the points on all the lines which are parallel to a given line and which pass through a fixed plane curve in a plane not parallel to the given line. Any line in this family of parallel lines is called an element of the cylindrical surface. From a kinematics point of view, given a plane curve, called the directrix, a cylindrical surface is that surface traced out by a line, called the generatrix, not in the plane of the directrix, moving parallel to itself and always passing through the directrix. Any particular position of the generatrix is an element of the cylindrical surface.

A right and an oblique circular cylinder

A solid bounded by a cylindrical surface and two parallel planes is called a (solid)  cylinder. The line segments determined by an element of the cylindrical surface between the two parallel planes is called an element of the cylinder. All the elements of a cylinder have equal lengths. The region bounded by the cylindrical surface in either of the parallel planes is called a  base of the cylinder. The two bases of a cylinder are congruent figures. If the elements of the cylinder are perpendicular to the planes containing the bases, the cylinder is a  right cylinder, otherwise it is called an  oblique cylinder. If the bases are disks (regions whose boundary is a circle) the cylinder is called a  circular cylinder. In some elementary treatments, a cylinder always means a circular cylinder.[2]

The  height (or altitude) of a cylinder is the perpendicular distance between its bases.

The cylinder obtained by rotating a line segment about a fixed line that it is parallel to is a  cylinder of revolution. A cylinder of revolution is a right circular cylinder. The height of a cylinder of revolution is the length of the generating line segment. The line that the segment is revolved about is called the  axis of the cylinder and it passes through the centers of the two bases.

A right circular cylinder with radius r and height h

### Right circular cylinders

Main article: Right circular cylinder

The bare term cylinder often refers to a solid cylinder with circular ends perpendicular to the axis, that is, a right circular cylinder, as shown in the figure. The cylindrical surface without the ends is called an  open cylinder. The formulae for the surface area and the volume of a right circular cylinder have been known from early antiquity.

A right circular cylinder can also be thought of as the solid of revolution generated by rotating a rectangle about one of its sides. These cylinders are used in an integration technique (the "disk method") for obtaining volumes of solids of revolution.[3]

A tall and thin needle cylinder has a height much greater than its diameter, whereas a short and wide disk cylinder has a diameter much greater than its height.

## Properties

### Cylindric sections

Cylindric section

A cylindric section is the intersection of a cylinder's surface with a plane. They are, in general, curves and are special types of plane sections. The cylindric section by a plane that contains two elements of a cylinder is a parallelogram.[4] Such a cylindric section of a right cylinder is a rectangle.[4]

A cylindric section in which the intersecting plane intersects and is perpendicular to all the elements of the cylinder is called a  right section.[5] If a right section of a cylinder is a circle then the cylinder is a circular cylinder. In more generality, if a right section of a cylinder is a conic section (parabola, ellipse, hyperbola) then the solid cylinder is said to be parabolic, elliptic and hyperbolic, respectively.

Cylindric sections of a right circular cylinder

For a right circular cylinder, there are several ways in which planes can meet a cylinder. First, planes that intersect a base in at most one point. A plane is tangent to the cylinder if it meets the cylinder in a single element. The right sections are circles and all other planes intersect the cylindrical surface in an ellipse.[6] If a plane intersects a base of the cylinder in exactly two points then the line segment joining these points is part of the cylindric section. If such a plane contains two elements, it has a rectangle as a cylindric section, otherwise the sides of the cylindric section are portions of an ellipse. Finally, if a plane contains more than two points of a base, it contains the entire base and the cylindric section is a circle.

In the case of a right circular cylinder with a cylindric section that is an ellipse, the eccentricity e of the cylindric section and semi-major axis a of the cylindric section depend on the radius of the cylinder r and the angle α between the secant plane and cylinder axis, in the following way:

e=cos⁡α,

a=rsin⁡α.

### Volume

If the base of a circular cylinder has a radius r and the cylinder has height h, then its volume is given by

V = πr2h.

This formula holds whether or not the cylinder is a right cylinder.[7]

This formula may be established by using Cavalieri's principle.

A solid elliptic cylinder with the semi-axes a and b for the base ellipse and height h

In more generality, by the same principle, the volume of any cylinder is the product of the area of a base and the height. For example, an elliptic cylinder with a base having semi-major axis a, semi-minor axis b and height h has a volume V = Ah, where A is the area of the base ellipse (= πab). This result for right elliptic cylinders can also be obtained by integration, where the axis of the cylinder is taken as the positive x-axis and A(x) = A the area of each elliptic cross-section, thus:

V=∫0hA(x)dx=∫0hπabdx=πab∫0hdx=πabh.

Using cylindrical coordinates, the volume of a right circular cylinder can be calculated by integration over

=∫0h∫02π∫0rsdsdϕdz
=πr2h.

### Surface area

Having radius r and altitude (height) h, the surface area of a right circular cylinder, oriented so that its axis is vertical, consists of three parts:

* the area of the top base: πr2
* the area of the bottom base: πr2
* the area of the side: 2πrh

The area of the top and bottom bases is the same, and is called the base area, B. The area of the side is known as the  lateral area, L.

An open cylinder does not include either top or bottom elements, and therefore has surface area (lateral area)

L = 2πrh.

The surface area of the solid right circular cylinder is made up the sum of all three components: top, bottom and side. Its surface area is therefore,

A = L \+ 2B = 2πrh \+ 2πr2 = 2πr(h \+ r) = πd(r \+ h),

where d = 2r is the diameter of the circular top or bottom.

For a given volume, the right circular cylinder with the smallest surface area has h = 2r. Equivalently, for a given surface area, the right circular cylinder with the largest volume has h = 2r, that is, the cylinder fits snugly in a cube of side length = altitude ( = diameter of base circle).[8]

The lateral area, L, of a circular cylinder, which need not be a right cylinder, is more generally given by:

L = e × p,

where e is the length of an element and p is the perimeter of a right section of the cylinder.[9] This produces the previous formula for lateral area when the cylinder is a right circular cylinder.

Hollow cylinder

### Right circular hollow cylinder (cylindrical shell)

A right circular hollow cylinder (or  cylindrical shell) is a three-dimensional region bounded by two right circular cylinders having the same axis and two parallel annular bases perpendicular to the cylinders' common axis, as in the diagram.

Let the height be h, internal radius r, and external radius R. The volume is given by

V=π(R2−r2)h=2π(R+r2)h(R−r)..

Thus, the volume of a cylindrical shell equals 2π(average radius)(altitude)(thickness).[10]

The surface area, including the top and bottom, is given by

A=2π(R+r)h+2π(R2−r2)..

Cylindrical shells are used in a common integration technique for finding volumes of solids of revolution.[11]

### On the Sphere and Cylinder

A sphere has 2/3 the volume and surface area of its circumscribing cylinder including its bases

Main article: On the Sphere and Cylinder

In the treatise by this name, written c. 225 BCE, Archimedes obtained the result of which he was most proud, namely obtaining the formulas for the volume and surface area of a sphere by exploiting the relationship between a sphere and its circumscribed right circular cylinder of the same height and diameter. The sphere has a volume two-thirds that of the circumscribed cylinder and a surface area two-thirds that of the cylinder (including the bases). Since the values for the cylinder were already known, he obtained, for the first time, the corresponding values for the sphere. The volume of a sphere of radius r is ⁠4/3⁠πr3 = ⁠2/3⁠ (2πr3). The surface area of this sphere is 4πr2 = ⁠2/3⁠ (6πr2). A sculpted sphere and cylinder were placed on the tomb of Archimedes at his request.

## Cylindrical surfaces

In some areas of geometry and topology the term cylinder refers to what has been called a cylindrical surface. A cylinder is defined as a surface consisting of all the points on all the lines which are parallel to a given line and which pass through a fixed plane curve in a plane not parallel to the given line.[12] Such cylinders have, at times, been referred to as  generalized cylinders. Through each point of a generalized cylinder there passes a unique line that is contained in the cylinder.[13] Thus, this definition may be rephrased to say that a cylinder is any ruled surface spanned by a one-parameter family of parallel lines.

A cylinder having a right section that is an ellipse, parabola, or hyperbola is called an elliptic cylinder, parabolic cylinder and hyperbolic cylinder, respectively. These are degenerate quadric surfaces.[14]

Parabolic cylinder

When the principal axes of a quadric are aligned with the reference frame (always possible for a quadric), a general equation of the quadric in three dimensions is given by

f(x,y,z)=Ax2+By2+Cz2+Dx+Ey+Gz+H=0,

with the coefficients being real numbers and not all of A, B and C being 0. If at least one variable does not appear in the equation, then the quadric is degenerate. If one variable is missing, we may assume by an appropriate rotation of axes that the variable z does not appear and the general equation of this type of degenerate quadric can be written as[15]

A(x+D2A)2+B(y+E2B)2=ρ,

where

ρ=−H+D24A+E24B.

### Elliptic cylinder

If AB > 0 this is the equation of an elliptic cylinder.[15] Further simplification can be obtained by translation of axes and scalar multiplication. If ρ has the same sign as the coefficients A and B, then the equation of an elliptic cylinder may be rewritten in Cartesian coordinates as:

(xa)2+(yb)2=1.

This equation of an elliptic cylinder is a generalization of the equation of the ordinary, circular cylinder (a = b). Elliptic cylinders are also known as cylindroids, but that name is ambiguous, as it can also refer to the Plücker conoid.

If ρ has a different sign than the coefficients, we obtain the imaginary elliptic cylinders:

(xa)2+(yb)2=−1,

which have no real points on them. (ρ=0 gives a single real point.)

### Hyperbolic cylinder

If A and B have different signs and ρ≠0, we obtain the hyperbolic cylinders, whose equations may be rewritten as:

(xa)2−(yb)2=1.

### Parabolic cylinder

Finally, if AB = 0 assume, without loss of generality, that B = 0 and A = 1 to obtain the parabolic cylinders with equations that can be written as:[16]

x2+2ay=0.
In projective geometry, a cylinder is simply a cone whose apex is at infinity, which corresponds visually to a cylinder in perspective appearing to be a cone towards the sky.

## Projective geometry

In projective geometry, a cylinder is simply a cone whose apex (vertex) lies on the plane at infinity. If the cone is a quadratic cone, the plane at infinity (which passes through the vertex) can intersect the cone at two real lines, a single real line (actually a coincident pair of lines), or only at the vertex. These cases give rise to the hyperbolic, parabolic or elliptic cylinders respectively.[17]

This concept is useful when considering degenerate conics, which may include the cylindrical conics.

## Prisms

Tycho Brahe Planetarium building, Copenhagen, is an example of a truncated cylinder

A solid circular cylinder can be seen as the limiting case of a n-gonal prism where n approaches infinity. The connection is very strong and many older texts treat prisms and cylinders simultaneously. Formulas for surface area and volume are derived from the corresponding formulas for prisms by using inscribed and circumscribed prisms and then letting the number of sides of the prism increase without bound.[18] One reason for the early emphasis (and sometimes exclusive treatment) on circular cylinders is that a circular base is the only type of geometric figure for which this technique works with the use of only elementary considerations (no appeal to calculus or more advanced mathematics). Terminology about prisms and cylinders is identical. Thus, for example, since a truncated prism is a prism whose bases do not lie in parallel planes, a solid cylinder whose bases do not lie in parallel planes would be called a truncated cylinder.

From a polyhedral viewpoint, a cylinder can also be seen as a dual of a bicone as an infinite-sided bipyramid.

## See also

* List of shapes
* Steinmetz solid, the intersection of two or three perpendicular cylinders

## Notes

1. ↑ κύλινδρος , Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus
2. ↑ Jacobs, Harold R. (1974), Geometry, W. H. Freeman and Co., p. 607, ISBN 0-7167-0456-0
3. ↑ Swokowski 1983, p. 283
4. ↑ 4.0 4.1 Wentworth & Smith 1913, p. 354
5. ↑ Wentworth & Smith 1913, p. 357
6. ↑ "MathWorld: Cylindric section". http://mathworld.wolfram.com/CylindricSection.html.
7. ↑ Wentworth & Smith 1913, p. 359
8. ↑ Lax, Peter D.; Terrell, Maria Shea (2013), Calculus With Applications, Undergraduate Texts in Mathematics, Springer, p. 178, ISBN 9781461479468, https://books.google.com/books?id=dDq3BAAAQBAJ&pg=PA178 .
9. ↑ Wentworth & Smith 1913, p. 358
10. ↑ Swokowski 1983, p. 292
11. ↑ Swokowski 1983, p. 291
12. ↑ Albert 2016, p. 43
13. ↑ Albert 2016, p. 49
14. ↑ Brannan, David A.; Esplen, Matthew F.; Gray, Jeremy J. (1999), Geometry, Cambridge University Press, p. 34, ISBN 978-0-521-59787-6
15. ↑ 15.0 15.1 Albert 2016, p. 74
16. ↑ Albert 2016, p. 75
17. ↑ Pedoe, Dan (1988), Geometry a Comprehensive Course, Dover, p. 398, ISBN 0-486-65812-0
18. ↑ Slaught, H.E.; Lennes, N.J. (1919), Solid Geometry with Problems and Applications (Revised ed.), Allyn and Bacon, pp. 79–81, http://www.gutenberg.org/files/29807/29807-pdf.pdf

## References

* Albert, Abraham Adrian (2016), Solid Analytic Geometry, Dover, ISBN 978-0-486-81026-3
* Swokowski, Earl W. (1983), Calculus with Analytic Geometry (Alternate ed.), Prindle, Weber & Schmidt, ISBN 0-87150-341-7, https://archive.org/details/calculuswithanal00swok
* Wentworth, George; Smith, David Eugene (1913), Plane and Solid Geometry, Ginn and Co.

## External links

| Wikimedia Commons has media related to Cylinder (geometry).

|

| Wikisource has the text of the 1911 Encyclopædia Britannica article Cylinder.

|

* Weisstein, Eric W.. "Cylinder". http://mathworld.wolfram.com/Cylinder.html.
* Surface area of a cylinder at MATHguide
* Volume of a cylinder at MATHguide

* v
* t
* e

Compact topological surfaces and their immersions in 3D

Without boundary|

| Orientable|

* Sphere (genus 0)
* Torus (genus 1)
* Number 8 (genus 2)
* Pretzel (genus 3) ...

|

Non-orientable|

* Real projective plane
* genus 1; Boy's surface
* Roman surface
* Klein bottle (genus 2)
* Dyck's surface (genus 3) ...

With boundary|

* Disk
* Semisphere
* Ribbon
* Annulus
* Cylinder
* Möbius strip
* Cross-cap
* Sphere with three holes ...

Related
notions|

| Properties|

* Connectedness
* Compactness
* Triangulatedness or smoothness
* Orientability

|

Characteristics|

* Number of boundary components
* Genus
* Euler characteristic

Operations|

* Connected sum
* Making a hole
* Gluing a handle
* Gluing a cross-cap
* Immersion

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Cylinder. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Cylinder&oldid=237197"
*[c.]: circa
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template