Unconventional wind turbines

Short description: Wind turbines of unconventional design

Counter-rotating wind turbines Light pole wind turbine

Unconventional wind turbines are those that differ significantly from the most common types in use.

As of 2024[update], the most common type of wind turbine is the three-bladed upwind horizontal-axis wind turbine (HAWT), where the turbine rotor is at the front of the nacelle and facing the wind upstream of its supporting turbine tower. A second major unit type is the vertical-axis wind turbine (VAWT), with blades extending upwards, supported by a rotating framework.

Due to the large growth of the wind power industry, many wind turbine designs exist, are in development, or have been proposed. The variety of designs reflects ongoing commercial, technological, and inventive interests in harvesting wind resources more efficiently and in greater volume.

Some unconventional designs have entered commercial use, while others have only been demonstrated or are only theoretical concepts. Unconventional designs cover a wide gamut of innovations, including different rotor types, basic functionalities, supporting structures and form-factors.

Crosswind kite generator with fast motion transfer

## Contents

* 1 Horizontal axis
* 1.1 Twin-bladed rotor
* 1.2 Downwind rotor
* 1.3 Ducted rotor
* 1.4 Co-axial, multi-rotor
* 1.5 Counter-rotating horizontal-axis
* 1.6 Furling tail and twisting blades
* 1.7 Wind-mill style
* 1.8 Archimedean screw
* 2 Bladeless
* 2.1 Boundary layer
* 2.2 Vaneless ion wind generator
* 2.3 Piezoelectric
* 2.4 Solar updraft tower
* 2.5 Vortex
* 2.6 Saphonian
* 2.7 Windbeam
* 2.8 Wind belt
* 3 Aerial
* 4 Vertical
* 4.1 Gorlov
* 4.2 Enclosed blades
* 4.3 H-rotor
* 4.4 Revolving-wing VAWT
* 4.5 O-wind turbine
* 5 Revolving blade
* 6 Components
* 6.1 INVELOX
* 7 Applications
* 7.1 Rooftop
* 7.2 Traffic-driven
* 7.3 Education
* 8 See also
* 9 References

## Horizontal axis

### Twin-bladed rotor

Nearly all modern wind turbines use rotors with three blades, but some use only two blades. This was the type used at Kaiser-Wilhelm-Koog, Germany, where a large experimental two-bladed unit—the GROWIAN, or Große Windkraftanlage (big wind turbine)—operated from 1983 to 1987. Other prototypes and wind turbine types were manufactured by NedWind. The Eemmeerdijk Wind Park in Zeewolde, Netherlands uses only two-bladed turbines. Wind turbines with two blades are manufactured by Windflow Technology, Mingyang Wind Power, GC China Turbine Corp and Nordic Windpower.[1] The NASA wind turbines (1975–1996) each had 2-blade rotors, producing the same energy at lower cost than three-blade rotor designs.

### Downwind rotor

Nearly all wind turbines place the rotor in front of the nacelle when the wind is blowing (upwind design). Some turbines place the rotor behind the nacelle (downwind design). This design has the advantage that the turbine can be made to passively align itself with the wind, reducing cost. The main drawback is that the load on the blades changes as they pass behind the tower, increasing fatigue loading, and potentially exciting resonances in other turbine structures.

### Ducted rotor

A research project,[2] the ducted rotor consists of a turbine inside a duct that flares at the back. They are also referred as Diffuser-Augmented Wind Turbines (i.e. DAWT). Its main advantage is that it can operate in a wide range of winds and generate a higher power per unit of rotor area. Another advantage is that the generator operates at a high rotation rate, so it doesn't require a bulky gearbox, allowing the mechanical portion to be smaller and lighter. A disadvantage is that (apart from the gearbox) it is more complicated than the unducted rotor and the duct's weight increases tower weight. The Éolienne Bollée is an example of a DAWT.

### Co-axial, multi-rotor

Two or more rotors may be mounted to a single driveshaft, with their combined co-rotation together turning the same generator: fresh wind is brought to each rotor by sufficient spacing between rotors combined with an offset angle (alpha) from the wind direction. Wake vorticity is recovered as the top of a wake hits the bottom of the next rotor. Power was multiplied several times using co-axial, multiple rotors in testing conducted by inventor and researcher Douglas Selsam in 2004. The first commercially available co-axial multi-rotor turbine is the patented dual-rotor American Twin Superturbine from Selsam Innovations in California, with two rotors separated by twelve feet (3.7 m). It is the most powerful seven-foot-diameter (2.1 m) turbine available, due to this extra rotor. In 2015, Iowa State University aerospace engineers Hui Hu and Anupam Sharma were optimizing designs of multi-rotor systems, including a horizontal-axis co-axial dual-rotor model. In addition to a conventional three-blade rotor, it has a smaller secondary three-blade rotor, covering the near-axis region usually inefficiently harvested. Preliminary results indicated 10–20% gains, less efficient than is claimed by existing counter-rotating designs.[3]

Counter-rotating wind turbine

### Counter-rotating horizontal-axis

When a system expels or accelerates mass in one direction, the accelerated mass causes a proportional but opposite force on that system. The spinning blade of a single-rotor wind turbine causes a significant amount of tangential, or rotational, air flow. The energy of this tangential air flow is wasted in a single-rotor turbine design. To use this wasted effort, the placement of a second rotor behind the first takes advantage of the disturbed airflow, and can gain up to 40% more energy from a given swept area as compared with a single rotor. Other advantages of contra-rotation include no gear boxes and auto-centering on the wind (no yaw motors/mechanism required). A patent application dated 1992 exists based on work done with the Trimblemill.[4]

When land or sea area for a second wind turbine does not come at a premium the 40% gain with a second rotor has to be compared with a 100% gain via the expense of a separate foundation and tower with cabling for the second turbine. The overall power coefficient of a Counter-rotating horizontal-axis wind turbine may depend by the axial and the radial shift of the rotors [5] and by the rotors' size.[6] As of 2005[update], no large, counter-rotating HAWTs are commercially sold.

### Furling tail and twisting blades

In addition to variable pitch blades, furling tails and twisting blades are other improvements on wind turbines. Similar to the variable pitch blades, they may also greatly increase efficiency and be used in "do-it-yourself" construction.[7]

### Wind-mill style

De Nolet is a wind turbine in Schiedam disguised as a windmill.

### Archimedean screw

Instead of airplane-inspired wing blades, the design takes after the Archimedean screw turbine, a helix-patterned pipe used in ancient Greece to pump water up from a deeper source. [8][9]

## Bladeless

### Boundary layer

The boundary-layer turbine, or Tesla turbine, uses boundary layers instead of blades.

One modern version is the Fuller turbine.[10] The concept is similar to a stack of disks on a central shaft, separated by a small air gap. The surface tension of air in the small gaps creates friction, rotating the disks around the shaft. Vanes direct the air for improved performance, hence it is not strictly bladeless.

### Vaneless ion wind generator

A vaneless ion wind generator is a theoretical device that produces electrical energy by using the wind to move electric charge from one electrode to another.

### Piezoelectric

See also: Physics:Piezoelectricity

Piezoelectric wind turbines work by flexing piezoelectric crystals as they rotate, sufficient to power small electronic devices. They operate with diameters on the scale of 10 centimeters.[11]

### Solar updraft tower

Main article: Physics:Solar updraft tower

Wind turbines may be used in conjunction with a solar collector to extract energy from air heated by the sun and rising through a large vertical updraft tower.

### Vortex

The Vortex Bladeless device maximizes vortex shedding, using the vorticity in wind to flutter a lightweight vertical pole, which delivers that energy to a generator at the bottom of the pole.[12][13][14][15] The design has been criticized for its efficiency of 40%, compared to 70% for conventional designs.[16] However, individual poles can be placed more closely together, offsetting the losses. The design avoids mechanical components, lowering costs. The system also does not threaten bird life and operates silently.[17]

### Saphonian

The Saphonian design uses an oscillating dish to drive a piston, which then connects to a generator.[18][19]

### Windbeam

The Windbeam generator consists of a beam suspended by springs within an outer frame. The beam oscillates rapidly when exposed to airflow due to multiple fluid flow phenomena. A linear alternator converts the beam motion. The absence of bearings and gears eliminates frictional inefficiencies and noise. Costs are low due to low cost components and simple construction.[20]

### Wind belt

Windbelt is a flexible, tensioned belt that vibrates from the passing flow of air, due to aeroelastic flutter. A magnet, mounted at one end of the belt oscillates in and out of coiled windings, producing electricity. The inventor is Shawn Frayne.[21][22]

## Aerial

Concept for an airborne wind generator

Airborne wind turbines may operate in low or high altitudes; they are part of a wider class of airborne wind energy systems (AWES) addressed by high-altitude wind power and crosswind kite power. Wind turbines could be flown in high-speed winds using high-altitude wind power tactics, taking advantage of high altitude winds.

When the generator is on the ground, then the tethered aircraft need not carry the generator mass or have a conductive tether. When the generator is aloft, then a conductive tether would be used to transmit energy to the ground or used aloft or beamed to receivers using microwave or laser.

The principle of the kite airborne wind turbine A possible flight path of the kite airborne wind turbine

For instance, a system of tethered kites[23] could capture energy from high-altitude winds. Another concept uses a helium balloon with attached sails to generate pressure and drive rotation around a horizontal axis. Circular motion of ropes transfer kinetic energy to ground-based generator.[24]

## Vertical

Vertical-axis wind turbines offshore

### Gorlov

The Gorlov helical turbine (GHT) is a modification of the Darrieus turbine design that uses helical blades/foils.[25][26]

### Enclosed blades

One design uses many nylon blades to run a generator. Its permanent magnets are on the tips of the blades, while the stator is a ring outside the blades.[27]

### H-rotor

The giromill is a vertical-axis turbine that rotates one blade in one direction while another moves in the opposite direction. Consequently, only one blade is working at a time. Its efficiency is low.[28]

### Revolving-wing VAWT

Revolving-wing wind turbines, or rotating-wing wind turbines, are a category of lift-type vertical-axis wind turbines that use one vertically standing, non-helical airfoil to generate 360-degree rotation around a vertical shaft which runs through the center of the airfoil.

### O-wind turbine

A omnidirectional turbine which uses the Bernoulli principle to generate energy using wind from any direction. The design is spherical with a number of ducts across the surface, a pressure difference causes the rotation. The design won the James Dyson Award 2018.[29][30]

## Revolving blade

Airloom is developing a turbine that uses vertical blades that move around an oval track. The system is 25 meters tall. The system is modular: blades can be added and the track length adjusted accordingly. The vendor claimed that the levelized cost of electricity is one-third of conventional turbines. The design is a terrestrial equivalent of an airborne turbine whose trajectory is fixed. A system can be installed and operating within one day.[31]

## Components

### INVELOX

SheerWind's INVELOX technology was developed by Daryoush Allaei. A large funnel-shaped intake acts as a wind concentrator, which ends in a Venturi section. Wind exits from a diffuser; turbines are placed inside the Venturi section. Inside the Venturi, the dynamic pressure is high while the static pressure is low. The turbine converts dynamic pressure or kinetic energy to mechanical rotation and thereby to electrical power using a generator.[32][33] The device has been constructed and tested, but has been criticized for lack of efficiency.[34] As of 2017[update], prototypes are being installed.[35][36]

## Applications

### Rooftop

Wind-turbines can be installed on building roofs. Examples include Marthalen Landi-Silo in Switzerland, Council House 2 in Melbourne, Australia. Ridgeblade in the UK is a vertical wind turbine on its side mounted on the apex of a pitched roof. Another example installed in France is the Aeolta AeroCube. Discovery Tower is an office building in Houston, Texas, that incorporates ten wind turbines.

The Museum of Science in Boston, Massachusetts began constructing a rooftop Wind Turbine Lab in 2009.[37] The lab is testing nine wind turbines from five different manufacturers. Rooftop wind turbines may suffer from turbulence, especially in cities, which reduces power output and accelerates turbine wear.[38] The lab seeks to address the general lack of performance data for urban wind turbines.[37]

Due to structural limitations of buildings, limited space in urban areas, and safety considerations, building turbines are usually small (with capacities in the low kilowatts). An exception is the Bahrain World Trade Centre with three 225 kW wind turbines mounted between twin skyscrapers.

### Traffic-driven

Highway wind turbine

Proposals call for generating power from the energy in the draft created by traffic.[39][40]

### Education

Some installations have installed visitor centers on turbine bases, or by providing viewing areas.[41] The wind turbines themselves are generally of conventional design, while serving the unconventional roles of technology demonstration, public relations, and education.

## See also

* EWICON
* Compact wind acceleration turbine
* Savonius wind turbine
* Wind lens
* Unconventional oil
* Unconventional gas

## References

1. ↑ NedWind Rhenen bV NW 43/500 (Turbine) , Nedwind website. Retrieved 27 January 2013.
2. ↑ "Uni-Stuttgart.de website". http://www.ifb.uni-stuttgart.de/~doerner/diffuser.html.
3. ↑ "Iowa State engineers study the benefits of adding a second, smaller rotor to wind turbines – News Service – Iowa State University". https://www.news.iastate.edu/news/2015/03/06/dualrotorturbines.
4. ↑ "WIPO - Search International and National Patent Collections : WO1992012343 Wind Turbine". https://patentscope.wipo.int/search/en/detail.jsf?docId=WO1992012343.
5. ↑ Hetyei, Csaba; Szlivka, Ferenc (2021-04-30). "Counter-Rotating Dual Rotor Wind Turbine Layout Optimisation" (in en). Acta Polytechnica 61 (2): 342–349. doi:10.14311/AP.2021.61.0342. ISSN 1805-2363. https://ojs.cvut.cz/ojs/index.php/ap/article/view/6721.
6. ↑ Hetyei, Csaba; Szlivka, Ferenc (2020-12-20). "Rotor size optimisation of a counter-rotating dual-rotor wind turbine" (in en). Safety and Security Sciences Review 2 (4): 89–104. ISSN 2676-9042. https://biztonsagtudomanyi.szemle.uni-obuda.hu/index.php/home/article/view/86.
7. ↑ Furling tail windturbines (page 18) PDF
8. ↑ "Is this odd-looking wind turbine the most efficient you can buy?". Washington Post. https://www.washingtonpost.com/news/innovations/wp/2014/06/10/is-this-odd-looking-wind-turbine-the-most-efficient-you-can-buy/.
9. ↑ "StarWind, roof mountable wind turbine". https://www.youtube.com/watch?v=BchzNf5lNmw.
10. ↑ "Virtually silent, fully enclosed, bladeless wind turbines on the way". 7 May 2010. https://newatlas.com/bladeless-wind-turbines/14977/.
11. ↑ "Description of several types of wind turbines –including piezoelectric". http://www.worldchanging.com/archives/003739.html#piezo.
12. ↑ Sam Davis. "A Wind Turbine Without Blades" . 2015.
13. ↑ Phil McKenna. "Bladeless Wind Turbines May Offer More Form Than Function". 2015.
14. ↑ Liz Stinson. "The future of wind turbines? No blades". 2015.
15. ↑ Clarke, Chris (May 15, 2015). "You Should Probably Be Skeptical About This Bladeless Wind Turbine". https://www.kcet.org/redefine/you-should-probably-be-skeptical-about-this-bladeless-wind-turbine.
16. ↑ McKenna, Phil (May 15, 2015). "Why the Bladeless Wind Turbine Has Its Skeptics" (in en). https://www.technologyreview.com/s/537721/bladeless-wind-turbines-may-offer-more-form-than-function/.
17. ↑ Stinson, Elizabeth (2015-05-15). "The Future of Wind Turbines? No Blades". Wired. ISSN 1059-1028. https://www.wired.com/2015/05/future-wind-turbines-no-blades/. Retrieved 2019-02-28.
18. ↑ "Saphonian bladeless turbine boasts impressive efficiency, low cost". 8 November 2012. https://newatlas.com/saphonian-bladeless-wind-turbine/24890/.
19. ↑ Clarke, Chris (December 12, 2013). "Bladeless Wind Turbine Too Good To Be True?". https://www.kcet.org/redefine/bladeless-wind-turbine-too-good-to-be-true.
20. ↑ "Zephyr Energy | Windbeam | | Zephyr Energy Corporation’s patented Windbeam micro generator captures energy from airflow to recharge batteries and power electronic devices. Zephyr Energy | Windbeam | | Zephyr Energy Corporation’s patented Windbeam micro generator captures energy from airflow to recharge batteries and power electronic devices.". http://zephyrenergy.com/.
21. ↑ Ward, Logan. Windbelt, Cheap Generator Alternative, Set to Power Third World , Popular Mechanics website, October 1, 2007.
22. ↑ Sofge, Erik. Shawn Frayne Makes Another Leap in Wind Power: Breakthrough Winner Update, Popular Mechanics website, December 18, 2009.
23. ↑ "Kite Energy at KiteEnergySystems". http://www.kiteenergysystems.com/.
24. ↑ Michailidis, Giannis (2023-01-09), High-Altitude-Wind-Turbine-Concept, https://github.com/John-Mich/High-Altitude-Wind-Turbine-Concept, retrieved 2023-02-22
25. ↑ A.M. Gorlov, Unidirectional helical reaction turbine operable under reversible fluid flow for power systems, United States Patent 5,451,137 , Sept. 19, 1995.
26. ↑ A.M. Gorlov, Method for maintaining flotation using a helical turbine assembly, United States Patent 6,253,700 , July 3, 2001.
27. ↑ Windtronics]
28. ↑ S. Brusca, R. Lanzafame, M. Messina. "Design of a vertical-axis wind turbine: how the aspect ratio affects the turbine’s performance". 2014.
29. ↑ "O-Wind Turbine" (in en). https://www.jamesdysonaward.org/2018/project/o-wind-turbine/.
30. ↑ Smithers, Rebecca (2018-09-05). "Groundbreaking 'spinning' wind turbine wins UK Dyson award" (in en-GB). The Guardian. ISSN 0261-3077. https://www.theguardian.com/environment/2018/sep/05/groundbreaking-spinning-wind-turbine-wins-uk-dyson-award.
31. ↑ Hanson, Karen (November 20, 2023). "Airloom CEO: Small Wind Turbine Functions Like a Roller Coaster". EE Power. https://eepower.com/news/airloom-ceo-small-wind-turbine-functions-like-a-roller-coaster/#.
32. ↑ McKenna, Phil (2012-12-03). "Ducted Wind Turbines: An Energy Game Changer?". https://www.technologyreview.com/s/508136/ducted-wind-turbines-an-energy-game-changer/.
33. ↑ "SheerWind, Changing the Course of Power Generation". http://sheerwind.com/.
34. ↑ "Sheerwind Invelox: All Hype, No Substance". CleanTechnica. 8 July 2014. http://cleantechnica.com/2014/07/08/invelox-ducted-turbine-latest-long-line-failures/.
35. ↑ "Strange structure at Fort Custer harnesses wind power". WWMT. 16 March 2016. http://wwmt.com/news/local/strange-structure-at-fort-custer-harnesses-wind-power.
36. ↑ "Nieuws – NedpowerSWH". NedpowerSWH. 28 February 2016. http://nedpowerswh.com/nieuws/.
37. ↑ 37.0 37.1 "New US Rooftop Wind Turbine Lab". Renewable Energy World. 2009-06-01. http://www.renewableenergyworld.com/rea/news/article/2009/06/new-us-rooftop-wind-turbine-lab.
38. ↑ Leake, Jonathan (2006-04-16). "Home wind turbines dealt killer blow". London: The Sunday Times. http://www.timesonline.co.uk/tol/news/uk/article706123.ece.
39. ↑ "Power generation system utilizing wind draft from vehicular traffic". https://www.freepatentsonline.com/7427173.html.
40. ↑ "Mark Oberholzer's roadside Darrieus wind turbine design". http://www.metropolismag.com/story/20070110/the-new-i-jersey-barrier.
41. ↑ Young, Kathryn (2007-08-03). "Canada wind farms blow away turbine tourists". Edmonton Journal. http://www.canada.com/edmontonjournal/news/business/story.html?id=63a5438a-ae99-4b76-9629-b7b59d238932.

* v
* t
* e

Wind power

Wind power|

* High-altitude
* History
* By country
* Land vehicles
* Offshore
* Turbines
* on public display
* Windmill

Wind turbines|

* Aerodynamics
* Airborne
* Crosswind kite
* Darrieus
* Design
* Floating
* Savonius
* Small
* Unconventional
* Vertical axis

Wind power industry|

* Consulting companies
* Farm management
* Manufacturers
* Software
* Windmade

Wind farms|

* Community-owned
* Farms by country
* Offshore farms
* by country
* Onshore farms

Concepts|

* Betz's law
* Capacity factor
* EROEI
* Forecasting
* Grid energy storage
* HVDC
* Intermittency
* Variability
* Laddermill
* Net energy gain
* Resource assessment
* Storage
* Subsidies
* Virtual power plant
* Wind hybrid power systems
* Wind profile power law

Manufacturers|

* Siemens Gamesa
* Nordex
* Suzlon
* Senvion
* Vestas
* Enercon
* GE Wind Energy
* including GE Wind offshore

* Category
* Commons
* Portals: Energy
* Renewable energy

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Unconventional wind turbines. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Unconventional_wind_turbines&oldid=4128098"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template