Protected Extensible Authentication Protocol

Short description: Protocol that encapsulates Extensible Authentication Protocol

PEAP is also an acronym for Personal Egress Air Packs.

The Protected Extensible Authentication Protocol, also known as Protected EAP or simply PEAP, is a protocol that encapsulates the Extensible Authentication Protocol (EAP) within an encrypted and authenticated Transport Layer Security (TLS) tunnel.[1][2][3][4] The purpose was to correct deficiencies in EAP; EAP assumed a protected communication channel, such as that provided by physical security, so facilities for protection of the EAP conversation were not provided.[5]

PEAP was jointly developed by Cisco Systems, Microsoft, and RSA Security. PEAPv0 was the version included with Microsoft Windows XP and was nominally defined in draft-kamath-pppext-peapv0-00. PEAPv1 and PEAPv2 were defined in different versions of draft-josefsson-pppext-eap-tls-eap. PEAPv1 was defined in draft-josefsson-pppext-eap-tls-eap-00 through draft-josefsson-pppext-eap-tls-eap-05,[6] and PEAPv2 was defined in versions beginning with draft-josefsson-pppext-eap-tls-eap-06.[7]

The protocol only specifies chaining multiple EAP mechanisms and not any specific method.[3][8] However, use of the EAP-MSCHAPv2 and EAP-GTC methods are the most commonly supported.[citation needed]

## Contents

* 1 Overview
* 2 PEAPv0 with EAP-MSCHAPv2
* 3 PEAPv1 with EAP-GTC
* 4 References
* 5 External links

## Overview

PEAP is similar in design to EAP-TTLS, requiring only a server-side PKI certificate to create a secure TLS tunnel to protect user authentication, and uses server-side public key certificates to authenticate the server. It then creates an encrypted TLS tunnel between the client and the authentication server. In most configurations, the keys for this encryption are transported using the server's public key. The ensuing exchange of authentication information inside the tunnel to authenticate the client is then encrypted and user credentials are safe from eavesdropping.

As of May 2005, there were two PEAP sub-types certified for the updated WPA and WPA2 standard. They are:

* PEAPv0/EAP-MSCHAPv2
* PEAPv1/EAP-GTC

PEAPv0 and PEAPv1 both refer to the outer authentication method and are the mechanisms that create the secure TLS tunnel to protect subsequent authentication transactions. EAP-MSCHAPv2 and EAP-GTC refer to the inner authentication methods which provide user or device authentication. A third authentication method commonly used with PEAP is EAP-SIM.

Within Cisco products, PEAPv0 supports inner EAP methods EAP-MSCHAPv2 and EAP-SIM while PEAPv1 supports inner EAP methods EAP-GTC and EAP-SIM. Since Microsoft only supports PEAPv0 and doesn't support PEAPv1, Microsoft simply calls it "PEAP" without the v0 or v1 designator. Another difference between Microsoft and Cisco is that Microsoft only supports the EAP-MSCHAPv2 method and not the EAP-SIM method.

However, Microsoft supports another form of PEAPv0 (which Microsoft calls PEAP-EAP-TLS) that many Cisco and other third-party server and client software don't support. PEAP-EAP-TLS requires client installation of a client-side digital certificate or a more secure smartcard. PEAP-EAP-TLS is very similar in operation to the original EAP-TLS but provides slightly more protection because portions of the client certificate that are unencrypted in EAP-TLS are encrypted in PEAP-EAP-TLS. Ultimately, PEAPv0/EAP-MSCHAPv2 is by far the most prevalent implementation of PEAP, due to the integration of PEAPv0 into Microsoft Windows products. Cisco's CSSC client (discontinued in 2008 [9]) now supports PEAP-EAP-TLS.

PEAP has been so successful in the market place that even Funk Software (acquired by Juniper Networks in 2005), the inventor and backer of EAP-TTLS, added support for PEAP in their server and client software for wireless networks.

## PEAPv0 with EAP-MSCHAPv2

MS-CHAPv2 is an old authentication protocol which Microsoft introduced with NT4.0 SP4 and Windows 98.

PEAPv0/EAP-MSCHAPv2 is the most common form of PEAP in use, and what is usually referred to as PEAP. The inner authentication protocol is Microsoft's Challenge Handshake Authentication Protocol, meaning it allows authentication to databases that support the MS-CHAPv2 format, including Microsoft NT and Microsoft Active Directory.

Behind EAP-TLS, PEAPv0/EAP-MSCHAPv2 is the second most widely supported EAP standard in the world. There are client and server implementations of it from various vendors, including support in all recent releases from Microsoft, Apple Computer and Cisco. Other implementations exist, such as the xsupplicant from the Open1x.org project, and wpa supplicant.

As with other 802.1X and EAP types, dynamic encryption can be used with PEAP.

A CA certificate must be used at each client to authenticate the server to each client before the client submits authentication credentials. If the CA certificate is not validated, in general it is trivial to introduce a fake Wireless Access Point which then allows gathering of MS-CHAPv2 handshakes.[10]

Several weaknesses have been found in MS-CHAPv2, some of which severely reduce the complexity of brute-force attacks making them feasible with modern hardware.[11]

## PEAPv1 with EAP-GTC

PEAPv1/EAP-GTC was created by Cisco to provide interoperability with existing token card and directory based authentication systems via a protected channel. Even though Microsoft co-invented the PEAP standard, Microsoft never added support for PEAPv1 in general, which means PEAPv1/EAP-GTC has no native Windows OS support. Since Cisco has typically recommended lightweight EAP protocols such as LEAP and EAP-FAST protocols instead of PEAP, the latter has not been as widely adopted as some had hoped.

With no interest from Microsoft to support PEAPv1 and no promotion from Cisco, PEAPv1 authentication is rarely used.[when?] Even in Windows 7, released in late 2009, Microsoft has not added support for any other authentication system other than MSCHAPv2.

Nokia E66 and later mobile phones ship with a version of Symbian which includes EAP-GTC support.

LDAP (Lightweight Directory Access Protocol) only supports EAP-GTC.[citation needed]

## References

1. ↑ "Understanding the updated WPA and WPA2 standards". ZDNet. 2005-06-02. http://www.zdnet.com/blog/ou/understanding-the-updated-wpa-and-wpa2-standards/67. Retrieved 2012-07-17.
2. ↑ Microsoft's PEAP version 0, draft-kamath-pppext-peapv0-00, §1.1
3. ↑ 3.0 3.1 Protected EAP Protocol (PEAP) Version 2, draft-josefsson-pppext-eap-tls-eap-10, abstract
4. ↑ Protected EAP Protocol (PEAP) Version 2, draft-josefsson-pppext-eap-tls-eap-10, §1
5. ↑ Protected EAP Protocol (PEAP) Version 2, draft-josefsson-pppext-eap-tls-eap-07, §1
6. ↑ Protected EAP Protocol (PEAP), draft-josefsson-pppext-eap-tls-eap-05, §2.3
7. ↑ Protected EAP Protocol (PEAP), draft-josefsson-pppext-eap-tls-eap-06, §2.3
8. ↑ Protected EAP Protocol (PEAP) Version 2, draft-josefsson-pppext-eap-tls-eap-10, §2
9. ↑ "End-of-Sale and End-of-Life Announcement for the Cisco Secure Services Client v4.0" (in en). https://www.cisco.com/c/en/us/products/collateral/wireless/secure-services-client/EOL_c51-459086.html.
10. ↑ "Man-in-the-Middle in Tunneled Authentication Protocols". Nokia Research Center. //eprint.iacr.org/2002/163.pdf. Retrieved 14 November 2013.
11. ↑ "Divide and Conquer: Cracking MS-CHAPv2 with a 100% success rate". 2016-03-16. https://www.cloudcracker.com/blog/2012/07/29/cracking-ms-chap-v2/.

## External links

* Microsoft's PEAP version 0 (Implementation in Windows XP SP1), IETF, 25 October 2002, I-D draft-kamath-pppext-peapv0-00, https://tools.ietf.org/html/draft-kamath-pppext-peapv0-00
* draft-josefsson-pppext-eap-tls-eap \- The EAP-TLS protocol specifications

* v
* t
* e

Authentication

Authentication APIs|

* BSD Authentication (BSD Auth)
* eAuthentication
* Generic Security Services API (GSSAPI)
* Java Authentication and Authorization Service (JAAS)
* Pluggable Authentication Modules (PAM)
* Simple Authentication and Security Layer (SASL)
* Security Support Provider Interface (SSPI)
* XCert Universal Database API (XUDA)

Authentication protocol|

* ACF2
* AKA
* CAVE-based authentication
* Challenge-Handshake Authentication Protocol (CHAP)
* MS-CHAP
* Central Authentication Service (CAS)
* CRAM-MD5
* Diameter
* Extensible Authentication Protocol (EAP)
* Host Identity Protocol (HIP)
* IndieAuth
* Kerberos
* LAN Manager
* NT LAN Manager (NTLM)
* OAuth
* OpenID
* OpenID Connect (OIDC)
* Password-authenticated key agreement protocols
* Password Authentication Protocol (PAP)
* Protected Extensible Authentication Protocol (PEAP)
* Remote Access Dial In User Service (RADIUS)
* Resource Access Control Facility (RACF)
* Secure Remote Password protocol (SRP)
* TACACS
* Woo–Lam

* Category
* Commons

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Protected Extensible Authentication Protocol. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Protected_Extensible_Authentication_Protocol&oldid=310328"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template