Music technology (mechanical)

For electric music technologies, see Music technology; for electronic or digital music technologies, see Music technology

The modern bassoon was only feasible as an instrument when the mechanical technology for creating precise key mechanisms was developed. In the 2010s, flutes, clarinets and many other woodwind instruments use similar key mechanisms.

Mechanical music technology is the use of any device, mechanism, machine or tool by a musician or composer to make or perform music; to compose, notate, play back or record songs or pieces; or to analyze or edit music. The earliest known applications of technology to music was prehistoric peoples' use of a tool to hand-drill holes in bones to make simple flutes. Ancient Egyptians developed stringed instruments, such as harps, lyres and lutes, which required making thin strings and some type of peg system for adjusting the pitch of the strings. Ancient Egyptians also used wind instruments such as double clarinets and percussion instruments such as cymbals. In Ancient Greece , instruments included the double-reed aulos and the lyre. Numerous instruments are referred to in the Bible, including the horn, pipe, lyre, harp, and bagpipe. During Biblical times, the cornet, flute, horn, organ, pipe, and trumpet were also used. During the Middle Ages, hand-written music notation was developed to write down the notes of religious Plainchant melodies; this notation enabled the Catholic church to disseminate the same chant melodies across its entire empire.

During the Renaissance music era, the printing press was invented, which made it much easier to mass-produce music (which had previously been hand-copied). This helped to spread musical styles more quickly and across a larger area. During the Baroque era (1600–1750), technologies for keyboard instruments developed, which led to improvements in the designs of pipe organs and harpsichords, and the development of a new keyboard instrument in about 1700, the piano. In the Classical era (1750–1820), Beethoven added new instruments to the orchestra to create new sounds, such as the piccolo, contrabassoon, trombones, and untuned percussion in his Ninth Symphony. During the Romantic music era (c. 1810 to 1900), one of the key ways that new compositions became known to the public was by the sales of relatively inexpensive sheet music, which amateur middle class music lovers would perform at home on their piano or other instruments. In the 19th century, new instruments such as piston valve-equipped cornets, saxophones, euphoniums, and Wagner tubas were added to the orchestra. Many of the mechanical innovations developed for instruments in the 19th century, notably on the piano, brass and woodwinds continued to be used in the 20th and early 21st century.

## Contents

* 1 History
* 1.1 Prehistoric eras
* 1.2 Ancient Egypt
* 1.3 Asian cultures
* 1.4 References in the Bible
* 1.5 Ancient Greece
* 1.6 Ancient Rome
* 1.7 Middle Ages
* 1.8 Renaissance
* 1.9 Baroque
* 1.10 Classicism
* 1.11 Romanticism
* 2 References
* 3 External links

## History

### Prehistoric eras

A bone flute which is over 41,000 years old.

Findings from paleolithic archaeology sites suggest that prehistoric people used carving and piercing tools to create instruments. Archeologists have found Paleolithic flutes carved from bones in which lateral holes have been pierced. The Divje Babe flute, carved from a cave bear femur, is thought to be at least 40,000 years old. Instruments such as the seven-holed flute and various types of stringed instruments, such as the Ravanahatha, have been recovered from the Indus Valley civilization archaeological sites.[1] India has one of the oldest musical traditions in the world—references to Indian classical music (marga) are found in the Vedas, ancient scriptures of the Hindu tradition.[2] The earliest and largest collection of prehistoric musical instruments was found in China and dates back to between 7000 and 6600 BC.[3]

### Ancient Egypt

Musicians of Amun, 18th Dynasty (c. 1543–1292 BC)

In prehistoric Egypt, music and chanting were commonly used in magic and rituals, and small shells were used as whistles.[4]: 26–30 Evidence of Egyptian musical instruments dates to the Predynastic period, when funerary chants played an important role in Egyptian religion and were accompanied by clappers and possibly the flute. The most reliable evidence of instrument technologies dates from the Old Kingdom, when technologies for constructing harps, flutes and double clarinets were developed.[5] Percussion instruments, lyres and lutes were used by the Middle Kingdom. Metal cymbals were used by ancient Egyptians.[6] In the early 21st century, interest in the music of the pharaonic period began to grow, inspired by the research of such foreign-born musicologists as Hans Hickmann. By the early 21st century, Egyptian musicians and musicologists led by the musicology professor Khairy El-Malt at Helwan University in Cairo had begun to reconstruct musical instruments of Ancient Egypt, a project that is ongoing.[7]

### Asian cultures

The Indus Valley civilization has sculptures that show old musical instruments, like the seven-holed flute. Various types of stringed instruments and drums have been recovered from Harappa and Mohenjo Daro by excavations carried out by Sir Mortimer Wheeler.[8]

### References in the Bible

"David with his harp", from the Paris Psalter, c. 960, Constantinople.

According to the Scriptures, Jubal was the father of harpists and organists (Gen. 4:20–21). The harp was among the chief instruments and the favorite of David, and it is referred to more than fifty times in the Bible. It was used at both joyful and mournful ceremonies, and its use was "raised to its highest perfection under David" (1 Sam. 16:23). Lockyer adds that "It was the sweet music of the harp that often dispossessed Saul of his melancholy (1 Sam. 16:14–23; 18:10–11).[9]: 46 When the Jews were captive in Babylon they hung their harps up and refused to use them while in exile, earlier being part of the instruments used in the Temple (1 Kgs. 10:12). Another stringed instrument of the harp class, and one also used by the ancient Greeks, was the lyre. A similar instrument was the lute, which had a large pear-shaped body, long neck, and fretted fingerboard with head screws for tuning. Coins displaying musical instruments, the Bar Kochba Revolt coinage, were issued by the Jews during the Second Jewish Revolt against the Roman Empire of 132–135 AD.

Miriam and women celebrate the crossing of the Red Sea with "timbrels" (small hand drums) (from the Tomić Psalter).

In addition there was the psaltery, another stringed instrument which is referred to almost thirty times in Scripture. According to Josephus, it had twelve strings and was played with a quill, not with the hand. Another writer suggested that it was like a guitar, but with a flat triangular form and strung from side to side.[9]: 49

Among the wind instruments used in the biblical period were the cornet, wood flute, horn, organ, pipe, and early trumpet.[9]: 50 There were also silver trumpets and the double oboe. Werner concludes that from the measurements taken of the trumpets on the Arch of Titus in Rome and from coins, that "the trumpets were very high pitched with thin body and shrill sound." He adds that in War of the Sons of Light Against the Sons of Darkness, a manual for military organization and strategy discovered among the Dead Sea Scrolls, these trumpets "appear clearly capable of regulating their pitch pretty accurately, as they are supposed to blow rather complicated signals in unison."[10]: 2 Whitcomb writes that the pair of silver trumpets were fashioned according to Mosaic law and were probably among the trophies which the Emperor Titus brought to Rome when he conquered Jerusalem. She adds that on the Arch raised to the victorious Titus, "there is a sculptured relief of these trumpets, showing their ancient form. (see photo)[11]

The flute was commonly used for festal and mourning occasions, according to Whitcomb. "Even the poorest Hebrew was obliged to employ two flute-players to perform at his wife's funeral."[11] The shofar (the horn of a ram) is still used for special liturgical purposes such as the Jewish New Year services in orthodox communities. As such, it is not considered a musical instrument but an instrument of theological symbolism which has been intentionally kept to its primitive character. In ancient times it was used for warning of danger, to announce the new moon or beginning of Sabbath, or to announce the death of a notable. "In its strictly ritual usage it carried the cries of the multitude to God," writes Werner.[10]: 12

Among the percussion instruments were bells, cymbals, sistrum, tabret, hand drums, and tambourines. The tabret, or timbrel, was a small hand-drum used for festive occasions, and was considered a woman's instrument. In modern times it was often used by the Salvation Army. According to the Bible, when the children of Israel came out of Egypt and crossed the Red Sea, "Miriam took a timbrel in her hands; and all the women went out after her with timbrels and with dance."[9]

### Ancient Greece

The hydraulis or "water organ". Note the curved trumpet, called the bukanē by the Greeks and, later, cornu by the Romans.

In Ancient Greece , instruments in all music can be divided into three categories,[12] based on how sound is produced: string, wind, and percussion. The following were among the instruments used in the music of ancient Greece:

* the lyre: a strummed and occasionally plucked string instrument, essentially a hand-held zither built on a tortoise-shell frame, generally with seven or more strings tuned to the notes of one of the modes. The lyre was used to accompany others or even oneself for recitation and song.
* the kithara, also a strummed string instrument, more complicated than the lyre. It had a box-type frame with strings stretched from the cross-bar at the top to the sounding box at the bottom; it was held upright and played with a plectrum. The strings were tunable by adjusting wooden wedges along the cross-bar.
* the aulos, usually double, consisting of two double-reed (like an oboe) pipes, not joined but generally played with a mouth-band to hold both pipes steadily between the player's lips. Modern reconstructions indicate that they produced a low, clarinet-like sound. There is some confusion about the exact nature of the instrument; alternate descriptions indicate single-reeds instead of double reeds.
* the Pan pipes, also known as panflute and syrinx (Greek συριγξ), (so-called for the nymph who was changed into a reed in order to hide from Pan) is an ancient musical instrument based on the principle of the stopped pipe, consisting of a series of such pipes of gradually increasing length, tuned (by cutting) to a desired scale. Sound is produced by blowing across the top of the open pipe (like blowing across a bottle top).
* the hydraulis, a keyboard instrument, the forerunner of the modern organ. As the name indicates, the instrument used water to supply a constant flow of pressure to the pipes. Two detailed descriptions have survived: that of Vitruvius [13] and Heron of Alexandria.[14] These descriptions deal primarily with the keyboard mechanism and with the device by which the instrument was supplied with air. A well-preserved model in pottery was found at Carthage in 1885. Essentially, the air to the pipes that produce the sound comes from a wind-chest connected by a pipe to a dome; air is pumped in to compress water, and the water rises in the dome, compressing the air, and causing a steady supply of air to the pipes.[15]

In the Aeneid, Virgil makes numerous references to the trumpet. The lyre, kithara, aulos, hydraulis (water organ) and trumpet all found their way into the music of ancient Rome.

### Ancient Rome

Musicians in a detail from the Zliten mosaic (2nd century AD), originally shown as accompanying gladiator combat and wild-animal events in the arena: from left, the tuba, hydraulis (water pipe organ), and two cornua

The Romans may have borrowed the Greek method[1][page needed] of 'enchiriadic notation' to record their music, if they used any notation at all. Four letters (in English notation 'A', 'G', 'F' and 'C') indicated a series of four succeeding tones. Rhythm signs, written above the letters, indicated the duration of each note. Roman art depicts various woodwinds, "brass", percussion and stringed instruments.[2] Roman-style instruments are found in parts of the Empire where they did not originate, and indicate that music was among the aspects of Roman culture that spread throughout the provinces.

Roman instruments include:

* The Roman tuba was a long, straight bronze trumpet with a detachable, conical mouthpiece. Extant examples are about 1.3 metres long, and have a cylindrical bore from the mouthpiece to the point where the bell flares abruptly,[3] similar to the modern straight trumpet seen in presentations of 'period music'. Since there were no valves, the tuba was capable only of a single overtone series.[4] In the military, it was used for "bugle calls". The tuba is also depicted in art such as mosaics accompanying games (ludi) and spectacle events.
* The cornu (Latin "horn") was a long tubular metal wind instrument that curved around the musician's body, shaped rather like an uppercase G. It had a conical bore (again like a French horn) and a conical mouthpiece. It may be hard to distinguish from the buccina. The cornu was used for military signals and on parade.[5] The cornicen was a military signal officer who translated orders into calls. Like the tuba, the cornu also appears as accompaniment for public events and spectacle entertainments.
* The tibia (Greek aulos – αὐλός), usually double, had two double-reed (as in a modern oboe) pipes, not joined but generally played with a mouth-band capistrum to hold both pipes steadily between the player's lips.[6]
* The askaules – a bagpipe.
* Versions of the modern flute and panpipes.
* The lyre, borrowed from the Greeks, was not a harp, but instead had a sounding body of wood or a tortoise shell covered with skin, and arms of animal horn or wood, with strings stretched from a cross bar to the sounding body.[7]
* The cithara was the premier musical instrument of ancient Rome and was played both in popular and elevated forms of music. Larger and heavier than a lyre, the cithara was a loud, sweet and piercing instrument with precision tuning ability.
* The lute (pandura or monochord) was known by several names among the Greeks and Romans. In construction, the lute differs from the lyre in having fewer strings stretched over a solid neck or fret-board, on which the strings can be stopped to produce graduated notes. Each lute string is thereby capable of producing a greater range of notes than a lyre string.[8] Although long-necked lutes are depicted in art from Mesopotamia as early as 2340–2198 BC, and also occur in Egyptian iconography, the lute in the Greco-Roman world was far less common than the lyre and cithara. The lute of the medieval West is thought to owe more to the Arab oud, from which its name derives (al ʿūd).[9]
* The hydraulic pipe organ (hydraulis), which worked by water pressure, was "one of the most significant technical and musical achievements of antiquity".[10] Essentially, the air to the pipes that produce the sound comes from a mechanism of a wind-chest connected by a pipe to a dome; air is pumped in to compress water, and the water rises in the dome, compressing the air and causing a steady supply to reach the pipes[11][page needed] (also see Pipe organ). The hydraulis accompanied gladiator contests and events in the arena, as well as stage performances.
* Variations of a hinged wooden or metal device called a scabellum used to beat time. Also, there were various rattles, bells and tambourines.
* Drum and percussion instruments like timpani and castanets, the Egyptian sistrum, and brazen pans, served various musical and other purposes in ancient Rome, including backgrounds for rhythmic dance, celebratory rites like those of the Bacchantes and military uses.
* The sistrum was a rattle consisting of rings strung across the cross-bars of a metal frame, which was often used for ritual purposes.
* Cymbala (Lat. plural of cymbalum, from the Greek kymbalon) were small cymbals: metal discs with concave centres and turned rims, used in pairs which were clashed together.

### Middle Ages

A sample of notation for the Kýrie Eléison XI (Orbis Factor), which is from the Liber Usualis, which originated in the 11th century.[16] Listen to it interpreted.

During the Medieval Music era (476 to 1400) the plainchant tunes used by monks for religious songs were primarily monophonic (a single melody line, with no harmony parts) and transmitted by oral tradition ("by ear"). The earliest Medieval music did not have any kind of notational system for writing down melodies. As Rome tried to centralize the various chants across vast distances of its empire, which stretched from Europe to North Africa, a form of music notation was needed to write down the melodies. So long as the church had to rely on teaching people chant melodies "by ear", it limited the number of people who could be taught. As well, when songs are learned by ear, variations and changes naturally slip in.

Various signs written above the chant texts, called neumes were introduced. These little signs indicated to the singer whether the melody went up in pitch or down in pitch. By the ninth century, it was firmly established as the primary method of musical notation. The next development in musical notation was "heighted neumes", in which neumes were carefully placed at different heights in relation to each other. This allowed the neumes to give a rough indication of the size of a given interval (e.g., a small interval like a tone or a large interval like a sixth) as well as the direction (up in pitch or down in pitch).

At first the little dots were just placed in the space about the words. However, this method made it hard to determine what pitch a song started on, or when a song was returning to the same pitch. This quickly led to one or two lines, each representing a particular note, being placed on the music with all of the neumes relating back to them, and being placed on or above the lines. The line or lines acted as a reference point to help the singer gauge which notes were higher or lower. At first, these lines had no particular meaning and instead had a letter placed at the beginning indicating which note was represented. However, the lines indicating middle C and the F a fifth below slowly became most common. The completion of the four-line staff is usually credited to Guido d' Arezzo (c. 1000–1050), one of the most important musical theorists of the Middle Ages. The neumatic notational system, even in its fully developed state, did not clearly define any kind of rhythm for the singing of notes. Singers were expected to be able to improvise the rhythm, using established traditions and norms.

Musical notation from a Catholic Missal, c.1310–1320

Instruments used to perform medieval music include the early flute, which was made of wood and which did not have any metal keys or pads. Flutes of this era could be made as a side-blown or end-blown instrument; the wooden recorder and the related instrument called the gemshorn; and the pan flute. Medieval music used many plucked string instruments like the lute, mandore, gittern and psaltery. The dulcimers, similar in structure to the psaltery and zither, were originally plucked, but became struck by hammers in the 14th century after the arrival of new technology that made metal strings possible.

The bowed lyra of the Byzantine Empire was the first recorded European bowed string instrument. The Persian geographer Ibn Khurradadhbih of the 9th century (d. 911) cited the Byzantine lyra as a bowed instrument equivalent to the Arab rabāb and typical instrument of the Byzantines along with the urghun (organ), shilyani (probably a type of harp or lyre) and the salandj (probably a bagpipe).[17] The hurdy-gurdy was a mechanical violin using a rosined wooden wheel attached to a crank to "bow" its strings. Instruments without sound boxes like the jaw harp were also popular in the time. Early versions of the organ, fiddle (or vielle), and trombone (called the sackbut) existed in the medieval era.

### Renaissance

The Renaissance music era (c. 1400 to 1600) saw the development of many new technologies that affected the performance and distribution of songs and musical pieces. Around 1450, the printing press was invented, which made printed sheet music much less expensive and easier to mass-produce (prior to the invention of the printing press, all notated music was laboriously hand-copied). The increased availability of printed sheet music helped to spread musical styles more quickly and across a larger geographic area. One limiting factor to the wider dissemination of musical styles was that monks, nuns, aristocrats and professional musicians and singers were among the few people who could read music.

Mechanical plate engraving was developed in the late sixteenth century.[18] Although plate engraving had been used since the early fifteenth century for creating visual art and maps, it was not applied to music until 1581.[18] In this method, a mirror image of a complete page of music was engraved onto a metal plate. Ink was then applied to the grooves, and the music print was transferred onto paper. Metal plates could be stored and reused, which made this method an attractive option for music engravers. Copper was the initial metal of choice for early plates, but by the eighteenth century pewter became the standard material due to its malleability and lower cost.[19]

Many instruments originated during the Renaissance. Some instruments used during the Renaissance were variations of, or improvements upon, instruments that had existed previously in the medieval era. Brass instruments in the Renaissance were traditionally played by professionals who were part of guilds, which kept playing techniques secret. Some of the more common brass instruments that were played included:

* Slide trumpet: Similar to the trombone of today except that instead of a section of the body sliding, only a small part of the body near the mouthpiece and the mouthpiece itself is stationary.
* Cornett: Made of wood and was played like the recorder, but blown like a trumpet.
* Trumpet: Early trumpets from the Renaissance era had no valves, and were limited to the tones present in the overtone series. This limited the types of melodies that Renaissance trumpets could play. They were also made in different sizes.
* Sackbut: A different name for the trombone, which replaced the slide trumpet by the middle of the 15th century

Stringed instruments included:

* Viol: This hollow, wooden stringed instrument, developed in the 15th century, commonly had six strings. It was usually played with a bow.
* Lyre: Its construction is similar to a small harp, although instead of being plucked, it is strummed with a plectrum (or "pick"). Its strings varied in quantity from four, seven, and ten, depending on the era. It was played with the right hand, while the left hand silenced the notes that were not desired. Some newer lyres were modified to be played with a bow.
* Hurdy-gurdy: (Also known as the "wheel fiddle"), in which the strings are sounded by a wheel which the strings pass over. Its functionality can be compared to that of a mechanical violin, in that its bow (wheel) is turned by a crank. Its distinctive sound is mainly because of its "drone strings" which provide a constant pitch similar in their sound to that of bagpipes.
* Gittern and mandore: these instruments were used throughout Europe. They were the forerunners of modern plucked string instruments including the mandolin and acoustic guitar.

Percussion instruments included:

* Tambourine: The tambourine is a frame drum equipped with jingles that produce a sound when the drum is struck.
* Jew's harp: An instrument that produces sound using shapes of the mouth and attempting to pronounce different vowels with ones mouth.

Woodwind instruments included:

* Shawm: A typical shawm is keyless and about a foot long, with seven finger holes and a thumb hole. The pipes were commonly made of wood and more expensive models had carvings and decorations on them. It was the most popular double reed instrument of the Renaissance period; it was commonly used in the streets with drums and trumpets because of its brilliant, piercing, and often deafening sound. To play the shawm a person puts the entire reed in their mouth, puffs out their cheeks, and blows into the pipe whilst breathing through their nose.

Renaissance recorders

* Reed pipe: Made from a single short length of cane with a mouthpiece, four or five finger holes, and reed fashioned from it. The reed is made by cutting out a small tongue, but leaving the base attached. It is the early predecessor of the saxophone and the clarinet.
* Hornpipe: Same as reed pipe but with a bell at the end.
* Bagpipe/Bladderpipe: It used a bag made out of sheep or goat skin that would provide air pressure for a pipe. When its player takes a breath, the player only needs to squeeze the bag tucked underneath their arm to continue the tone. The mouth pipe has a simple round piece of leather hinged on to the bag end of the pipe and acts like a non-return valve. The reed is located inside the long metal mouthpiece, known as a bocal.
* Panpipe: Designed to have sixteen wooden tubes with a stopper at one end and open on the other. Each tube is a different size (thereby producing a different tone), giving it a range of an octave and a half. The player can then place their lips against the desired tube and blow across it.
* Transverse flute: The transverse flute is similar to the modern flute with a mouth hole near the stoppered end and finger holes along the body. The player blows in the side and holds the flute to the right side.
* Recorder: It uses a whistle mouth piece, which is a beak shaped mouth piece, as its main source of sound production. It is usually made of wood, with seven finger holes and a thumb hole.

### Baroque

During the Baroque era of music (ca. 1600–1750), technologies for keyboard instruments developed, which led to improvements in the designs of pipe organs and harpsichords, and to the development of the first pianos. During the Baroque period, organ builders developed new types of pipes and reeds that created new tonal colors (timbres and sounds). Organ builders fashioned new stops that imitated various instruments, such as the viola da gamba stop. The Baroque period is often thought of as organ building's "golden age," as virtually every important refinement to the instrument was brought to a peak. Builders such as Arp Schnitger, Jasper Johannsen, Zacharias Hildebrandt and Gottfried Silbermann constructed instruments that displayed both exquisite craftsmanship and beautiful sound. These organs featured well-balanced mechanical key actions, giving the organist precise control over the pipe speech. Schnitger's organs featured particularly distinctive reed timbres and large Pedal and Rückpositiv divisions.

Harpsichord builders in the Southern Netherlands built instruments with two keyboard (two manuals) which could be used for transposition. These Flemish instruments served as the model for Baroque-era harpsichord construction in other nations. In France, the double keyboards were adapted to control different choirs (groups) of strings, making a more musically flexible instrument (e.g., the upper manual could be set to a quiet lute stop, while the lower manual could be set to a stop with multiple string choirs, for a louder sound; this enabled the harpsichordist to have two dynamics and tone colours from one instrument). Another approach that could be used on a two manual harpsichord would be to use a coupler to make one manual play two choirs of strings (e.g., an 8' set of strings and a 16' set of strings an octave lower), so that this manual could be used for a loud solo sound, and then having another manual set to trigger only one manual, creating an accompaniment volume. Instruments from the peak of the French tradition, by makers such as the Blanchet family and Pascal Taskin, are among the most widely admired of all harpsichords, and are frequently used as models for the construction of modern instruments. In England, the Kirkman and Shudi firms produced sophisticated harpsichords of great power and sonority. German builders extended the sound repertoire of the instrument by adding sixteen foot choirs, adding to the lower register and two-foot choirs, which added to the upper register.

The piano was invented during the Baroque era by the expert harpsichord maker Bartolomeo Cristofori (1655–1731) of Padua, Italy, who was employed by Ferdinando de' Medici, Grand Prince of Tuscany. Cristofori invented the piano at some point before 1700.[20][21] While the clavichord allowed expressive control of volume and sustain, it was too quiet for large performances. The harpsichord produced a sufficiently loud sound, but offered little expressive control over each note. The piano offered the best of both, combining loudness with dynamic control.

Cristofori's great success was solving, with no prior example, the fundamental mechanical problem of piano design: the hammer must strike the string, but not remain in contact with it (as a tangent remains in contact with a clavichord string) because this would damp the sound. Moreover, the hammer must return to its rest position without bouncing violently, and it must be possible to repeat the same note rapidly. Cristofori's piano action was a model for the many approaches to piano actions that followed. Cristofori's early instruments were much louder and had more sustain than the clavichord. The harpsichord continued to be used in performances during the first 50 years of the piano's existence; however, after 1750, the harpsichord was gradually phased out of orchestras and small music groups.

### Classicism

From about 1790 onward, the Mozart-era piano underwent tremendous changes that led to the modern form of the instrument. This revolution was in response to a preference by composers and pianists for a more powerful, sustained piano sound, and made possible by the ongoing Industrial Revolution with resources such as high-quality steel piano wire for strings, and precision casting for the production of iron frames. Over time, the tonal range of the piano was also increased from the five octaves of Mozart's day to the 7-plus range found on modern pianos. Early technological progress owed much to the firm of Broadwood. John Broadwood joined with another Scot, Robert Stodart, and a Dutchman, Americus Backers, to design a piano in the harpsichord case—the origin of the "grand". They achieved this in about 1777. They quickly gained a reputation for the splendour and powerful tone of their instruments, with Broadwood constructing ones that were progressively larger, louder, and more robustly constructed.

They sent pianos to both Joseph Haydn and Ludwig van Beethoven, and were the first firm to build pianos with a range of more than five octaves: five octaves and a fifth (interval) during the 1790s, six octaves by 1810 (Beethoven used the extra notes in his later works), and seven octaves by 1820. The Viennese makers similarly followed these trends; however the two schools used different piano actions: Broadwoods were more robust, Viennese instruments were more sensitive.

The cornet, a piston-valved brass instrument related to the trumpet, could not have been developed without the improvement of piston valves by Heinrich Stölzel and Friedrich Blühmel. In the early 19th century these two instrument makers almost simultaneously invented the valves still used today. Beethoven's instrumentation for orchestra added piccolo, contrabassoon, and trombones to the triumphal finale of his Symphony No. 5 (1804–1808). A piccolo and a pair of trombones help deliver effects of "storm" and "sunshine" in the composer's dramatic Sixth Symphony. Beethoven's use of piccolo, contrabassoon, trombones, and untuned percussion in his Ninth Symphony expanded the sound of the orchestra.

### Romanticism

During the Romantic music era (c. 1810 to 1900), one of the key ways that new compositions became known to the public was by the sales of sheet music, which amateur music lovers would perform at home on their piano or in chamber music groups, such as string quartets. Since mass-market sheet music was relatively inexpensive, this enabled composers and songwriters to distribute their songs and musical pieces to a larger audience and over a larger geographic area. While the widespread dissemination of sheet music helped to spread musical styles across a larger area, the impact was nevertheless restricted to the socioeconomic segments that could read music, sing melodies from sheet music and own pianos and other musical instruments–namely the middle class and the upper class. Individuals from lower socioeconomic segments were only indirectly able to benefit from this wider dissemination of musical styles (i.e., by hearing new songs performed by professional musicians in brothels or taverns), as poor people could typically not read music or own pianos or other expensive instruments.

New instruments such as the saxophone began to appear in some 19th-century orchestra scores. While appearing only as featured solo instruments in some works, for example Maurice Ravel's orchestration of Modest Mussorgsky's Pictures at an Exhibition and Sergei Rachmaninoff's Symphonic Dances, the saxophone is included in other works, such as Ravel's Boléro, Sergei Prokofiev's Romeo and Juliet Suites 1 and 2. The euphonium was used in a few late Romantic and works, usually playing parts marked "tenor tuba", including Richard Strauss's Ein Heldenleben. The Wagner tuba, a modified member of the horn family, appears in Richard Wagner's cycle Der Ring des Nibelungen and several other works by Strauss, Béla Bartók, and others; it has a prominent role in Anton Bruckner's Symphony No. 7 in E Major.[22] Cornets appear in Pyotr Ilyich Tchaikovsky's ballet Swan Lake, Claude Debussy's La Mer, and several orchestral works by Hector Berlioz.

The piano continued to undergo technological developments in the Romantic era, up until the 1860s. By the 1820s, the center of piano building innovation had shifted to Paris, where the Pleyel firm manufactured pianos used by Frédéric Chopin and the Érard firm manufactured those used by Franz Liszt. In 1821, Sébastien Érard invented the double escapement action, which incorporated a repetition lever (also called the balancier) that permitted repeating a note even if the key had not yet risen to its maximum vertical position. This facilitated rapid playing of repeated notes, a musical device exploited by Liszt. When the invention became public, as revised by Henri Herz, the double escapement action gradually became standard in grand pianos, and is still incorporated into all grand pianos currently produced.

Other improvements of the piano mechanism included the use of thick felt hammer coverings instead of layered leather or cotton. Felt, which was first introduced by Jean-Henri Pape in 1826, was a more consistent material, permitting wider dynamic ranges as hammer weights and string tension increased. The sostenuto pedal, invented in 1844 by Jean-Louis Boisselot and copied by the Steinway firm in 1874, allowed a wider range of effects.

One innovation that helped create the powerful, loud sound of the modern piano was the use of a strong iron frame. Also called the "plate", the iron frame sits atop the soundboard, and serves as the primary bulwark against the force of string tension that can exceed 20 tons in a grand piano. The single-piece cast iron frame was patented in 1825 in Boston by Alpheus Babcock,[23] combining the metal hitch pin plate (1821, claimed by Broadwood on behalf of Samuel Hervé) and resisting bars (Thom and Allen, 1820, but also claimed by Broadwood and Érard). The increased structural integrity of the iron frame allowed the use of thicker, tenser, and more numerous strings, which further increased the strength of the instrument's tone. In 1834, the Webster & Horsfal firm of Birmingham brought out a form of piano wire made from cast steel; according to Dolge it was "so superior to the iron wire that the English firm soon had a monopoly."[24]

Other important advances included changes to the way the piano is strung, such as the use of a "choir" of three strings rather than two for all but the lowest notes, which made the piano louder and the implementation of an over-strung scale, in which the strings are placed in two separate planes, each with its own bridge height. The mechanical action structure of the upright piano was invented in London, England in 1826 by Robert Wornum, and upright models became the most popular model, also amplifying the sound.[25] Upright pianos were more compact than grand pianos, and less expensive, so the invention of the upright piano helped make the piano an even more important instrument in private homes (for amateur music-making); in schools; in rehearsal halls; and in some types of performance venues.

## References

1. ↑ Reginald Massey; Jamila Massey (1996). The Music of India. Abhinav Publications. p. 11. ISBN 9788170173328. https://books.google.com/books?id=yySNDP9XVggC&pg=PA11.
2. ↑ Brown, RE (1971). "India's Music". Readings in Ethnomusicology.
3. ↑ Wilkinson, Endymion (2000). Chinese history. Harvard University Asia Center.
4. ↑ Arroyos, Rafael Pérez (2003). Egypt: Music in the Age of the Pyramids (1st ed.). Madrid: Centro de Estudios Egipcios. p. 28. ISBN 8493279617.
5. ↑ Music of Ancient Egypt . Kelsey Museum of Archaeology, University of Michigan, Ann Arbor.
6. ↑ "UC 33268". digitalegypt.ucl.ac.uk. http://www.digitalegypt.ucl.ac.uk/metal/uc33268.html.
7. ↑ Ancient Egyptian Music Symposium
8. ↑ World History: Societies of the Past By Charles Kahn (page 11)
9. ↑ 9.0 9.1 9.2 9.3 Lockyer, Herbert Jr. All the Music of the Bible, Hendrickson Publ. (2004)
10. ↑ 10.0 10.1 Werner, Eric. The Sacred Bridge, Columbia Univ. Press (1984)
11. ↑ 11.0 11.1 Whitcomb, Ida Prentice. Young People's Story of Music, Dodd, Mead & Co. (1928)
12. ↑ Olson, pp. 108–109.
13. ↑ De Architectura x, 8.
14. ↑ Pneumatica, I, 42.
15. ↑ Williams.
16. ↑ Apel, Willi. Gregorian Chant. Indiana University Press, 1958. p. 417
17. ↑ Kartomi, Margaret J. (1990), On Concepts and Classifications of Musical Instruments, University of Chicago Press, p. 124, ISBN 978-0-226-42548-1
18. ↑ 18.0 18.1 King, A. Hyatt (1968). Four Hundred Years of Music Printing. London: Trustees of the British Museum.
19. ↑ Wolfe, Richard J. (1980). Early American Music Engraving and Printing. Urbana, IL: University of Illinois Press.
20. ↑ Erlich, Cyril (1990). The Piano: A History. Oxford University Press, USA; Revised edition. ISBN 0-19-816171-9.
21. ↑ Powers, Wendy (2003). "The Piano: The Pianofortes of Bartolomeo Cristofori (1655–1731) | Thematic Essay | Heilbrunn Timeline of Art History | The Metropolitan Museum of Art". New York: The Metropolitan Museum of Art. http://www.metmuseum.org/toah/hd/cris/hd_cris.htm.
22. ↑ "The Wagner Tuba". The Wagner Tuba. http://www.wagner-tuba.com/.
23. ↑ Isacoff (2012, 74)
24. ↑ Dolge, Alfred (January 1972). Pianos and Their Makers: A Comprehensive History of the Piano Volume 1. New York: Dover Publications. p. 124. ISBN 0486228568. https://books.google.com/books?id=PvYgWaXfcIYC&pg=PA124. Retrieved 28 February 2017.
25. ↑ Palmieri, Robert, ed (2003). Encyclopedia of keyboard instruments, Volume 2. Routledge. p. 437. ISBN 978-0-415-93796-2.

## External links

* Music Technology in Education
* Music Technology Resources
* Detailed history of electronic instruments and electronic music technology at '120 years of Electronic Music'

* v
* t
* e

Music technology

Music technology|

* Mechanical
* Electrical
* Electronic and digital

Sound recording|

* Audio channel
* Mixing console
* Binaural recording
* Digital audio workstation (DAW)
* Effects unit
* Equalizer
* Headphones
* Microphone
* Microphone preamplifier
* Monitor speaker
* Multitrack recording
* Music production
* Music sequencer
* Outboard gear

Recording media|

* Phonograph record
* Magnetic tape
* Compact cassette
* Compact disc
* DAT
* Hard disk
* MiniDisc
* MP3
* Opus

Analog recording|

* 8-track cartridge
* Amplifier
* Cassette deck
* Comparison of analog and digital recording
* Experimental musical instrument
* Phonograph
* Player piano
* Reel-to-reel audio tape recording
* Tape recorder

Playback transducers|

* Loudspeaker
* Headphones
* Monitor speaker
* PA system
* Sound reinforcement system
* Speaker enclosure
* Subwoofer

Digital audio|

* Digital recording
* Digital signal processing

Live music|

* Mixing console
* Bass amplifier
* Effects unit
* Foldback
* Guitar amplifier
* Keyboard amplifier
* PA system
* Radio
* Reverberation
* Sound reinforcement system

Electronic music|

* Chiptune
* Circuit bending
* Drum machine
* Electronic drums
* Electronic musical instrument
* MIDI
* MIDI controller
* Music workstation
* Sampler
* Sequencer
* Sound module
* Synthesizer
* Theremin

Software|

* Digital audio editor
* Digital audio workstation
* GarageBand
* ProTools
* Scorewriter
* Software effect processor
* Software sampler
* Software synthesizer

Professions|

* Audio engineer
* DJ
* Guitar technician
* Mixing engineer
* Monitor engineer
* Piano tuner
* Record producer
* Re-recording mixer
* Sound designer
* Sound follower
* Sound operator
* Sound recording engineer
* Tape op

People and organizations|

* Audio Engineering Society
* Goji Electronics
* Institute of Broadcast Sound
* Lejaren Hiller
* IRCAM
* Max Mathews
* Musical Electronics Library
* Professional Lighting and Sound Association
* Robert Moog
* SMPTE
* STEIM

Related topics|

* Audiophile
* High fidelity
* Home audio
* Home cinema
* Music store
* Professional audio store
* New Interfaces for Musical Expression (NIME)
* Vehicle audio

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Music technology (mechanical). Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Music_technology_(mechanical)&oldid=637883"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template