Internet checksum

Short description: Mechanism to detect corruption in the header of an IPv4 packet

The Internet checksum,[1][2] also called the IPv4 header checksum is a checksum used in version 4 of the Internet Protocol (IPv4) to detect corruption in the header of IPv4 packets. It is carried in the IPv4 packet header, and represents the 16-bit result of the summation of the header words.[3]

The IPv6 protocol does not use header checksums. Its designers considered that the whole-packet link layer checksumming provided in protocols, such as PPP and Ethernet, combined with the use of checksums in upper layer protocols such as TCP and UDP, are sufficient.[4] Thus, IPv6 routers are relieved of the task of recomputing the checksum whenever the packet changes, for instance by the lowering of the hop limit counter on every hop.

The Internet checksum is mandatory to detect errors in IPv6 UDP packets (including data payload).

The Internet checksum is used to detect errors in ICMP packets (including data payload).

## Contents

* 1 Computation
* 2 Examples
* 2.1 Calculating the IPv4 header checksum
* 2.2 Verifying the IPv4 header checksum
* 3 See also
* 4 Notes
* 5 References
* 6 External links

## Computation

The checksum calculation is defined as follows:REFERENCE FOR RFC791 IS NOT DEFINED YET. You are invited to add it here.

> The checksum field is the 16 bit one's complement of the one's complement sum of all 16 bit words in the header. For purposes of computing the checksum, the value of the checksum field is zero.

If there is no corruption, the result of summing the entire IP header, including checksum, and then taking its one's complement should be zero. At each hop, the checksum is verified. Packets with checksum mismatch are discarded. The router must adjust the checksum if it changes the IP header (such as when decrementing the TTL).REFERENCE FOR RFC1812 IS NOT DEFINED YET. You are invited to add it here.

The procedure is explained in detail in RFC 1071 "Computing the Internet Checksum".REFERENCE FOR RFC1071 IS NOT DEFINED YET. You are invited to add it here. Optimizations are presented in RFC 1624 "Computation of the Internet Checksum via Incremental Update", REFERENCE FOR RFC1624 IS NOT DEFINED YET. You are invited to add it here. to cover the case in routers that need to recompute the header checksum during packet forwarding when only a single field has changed.

## Examples

### Calculating the IPv4 header checksum

Take the following truncated excerpt of an IPv4 packet. The header is shown in bold and the checksum is underlined.

`4500 0073 0000 4000 4011 b861 c0a8 0001
` `c0a8 00c7 0035 e97c 005f 279f 1e4b 8180`

For ones' complement addition, each time a carry occurs, we must add a 1 to the sum.[5] A carry check and correction can be performed with each addition or as a post-process after all additions. If another carry is generated by the correction, another 1 is added to the sum.

To calculate the checksum, we can first calculate the sum of each 16-bit value within the header, skipping only the checksum field itself. Note that these values are in hexadecimal notation.

Initial addition: `4500 + 0073 + 0000 + 4000 + 4011 + 0000[lower-alpha 1] + c0a8 + 0001 + c0a8 + 00c7 = 2479c`

Carry addition is then made by adding the fifth hexadecimal digit to the first 4 digits: `2 + 479c = 479e`

The checksum is then the ones' complement (bitwise NOT) of this result: `NOT 479e = b861`

This checksum value is shown as underlined in the original IP packet header above.

### Verifying the IPv4 header checksum

When verifying a checksum, the same procedure is used as above, except that the original header checksum is not omitted.
`4500 + 0073 + 0000 + 4000 + 4011 + b861 + c0a8 + 0001 + c0a8 + 00c7 = 2fffd`
Add the carry bits:
`fffd + 2 = ffff`
Taking the ones' complement (flipping every bit) yields 0000, which indicates that no error is detected. IP header checksum does not check for the correct order of 16-bit values within the header.

## See also

* Frame check sequence
* Header check sequence

## Notes

1. ↑ `0000` is the initial checksum value before the calculation and is also included in the calculation steps.

## References

1. ↑ Cite error: Invalid `<ref>` tag; no text was provided for refs named `rfc1071`
2. ↑ Cite error: Invalid `<ref>` tag; no text was provided for refs named `rfc1624`
3. ↑ IP Datagram General Format
4. ↑ Iljitsch van Beijnum (September 2006). "IPv6 Internals". Cisco. http://www.cisco.com/web/about/ac123/ac147/archived_issues/ipj_9-3/ipv6_internals.html.
5. ↑ "Compute 16-bit One's Complement Sum". http://mathforum.org/library/drmath/view/54379.html.

## External links

* Header Checksum

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Internet checksum. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Internet_checksum&oldid=4298624"