Hydrogen storage

Short description: Methods of storing hydrogen for later use

Not to be confused with green hydrogen for energy storage.

Liquid hydrogen Tank at NASA Kennedy Space Center

Several methods exist for storing hydrogen.[1] These include mechanical approaches such as using high pressures and low temperatures, or employing chemical compounds that release H2 upon demand. While large amounts of hydrogen are produced by various industries, it is mostly consumed at the site of production, notably for the synthesis of ammonia. For many years hydrogen has been stored as compressed gas or cryogenic liquid, and transported as such in cylinders, tubes, and cryogenic tanks[2] for use in industry or as propellant in space programs. The overarching challenge is the very low boiling point of H2: it boils around 20.268 K (−252.882 °C or −423.188 °F). Achieving such low temperatures requires expending significant energy.

Although molecular hydrogen has very high energy density on a mass basis, partly because of its low molecular weight, as a gas at ambient conditions it has very low energy density by volume. If it is to be used as fuel stored on board a vehicle, pure hydrogen gas must be stored in an energy-dense form to provide sufficient driving range. Because hydrogen is the smallest molecule, it easily escapes from containers. Its effective 100-year global warming potential (GWP100) is estimated to be Template:Plusminus.

## Contents

* 1 Established technologies
* 1.1 Compressed hydrogen
* 1.2 Liquefied hydrogen
* 2 Chemical storage
* 2.1 Hydrogenation of CO2
* 2.2 Metal hydrides
* 2.2.1 Selected advances using metal hydrides
* 2.3 Aluminium
* 2.4 Magnesium
* 2.5 Alanates-based systems
* 2.6 Organic hydrogen carriers
* 2.6.1 Cycloalkanes
* 2.6.2 N-Heterocycles
* 2.6.3 Formic acid
* 2.7 Ammonia and related compounds
* 2.7.1 Ammonia
* 2.7.1.1 Positive attributes of Ammonia
* 2.7.1.2 Negative attributes of Ammonia
* 2.7.2 Hydrazine
* 2.7.3 Amine boranes
* 3 Physical storage
* 3.1 Zeolites
* 3.2 Porous or layered carbon
* 3.3 Metal–organic frameworks
* 3.3.1 Factors influencing hydrogen storage ability
* 3.3.2 Modification of MOFs
* 3.4 Cryo-compressed
* 3.5 Cryo-supercritical
* 3.6 Clathrate hydrates
* 3.7 Glass capillary arrays
* 3.8 Glass microspheres
* 4 Stationary hydrogen storage
* 4.1 Underground hydrogen storage
* 4.1.1 Salt caverns
* 4.1.2 Development
* 4.2 Power to gas
* 5 Automotive onboard hydrogen storage
* 5.1 Fuel cells and storage
* 5.2 Other advantages of nanomaterials in fuel cells
* 5.3 Pressurized hydrogen gas
* 5.4 Liquid hydrogen
* 5.5 Liquid organic hydrogen carriers (LOHC)
* 6 Research
* 7 See also
* 8 References
* 9 External links

## Established technologies

Net storage density of hydrogen

### Compressed hydrogen

Compressed hydrogen is a storage form whereby hydrogen gas is kept under pressures to increase the storage density. Compressed hydrogen in hydrogen tanks at 350 bar (5,000 psi) and 700 bar (10,000 psi) are used for hydrogen tank systems in vehicles, based on type IV carbon-composite technology.[clarification needed][3] Car manufacturers including Honda[4] and Nissan[5] have been developing this solution.

### Liquefied hydrogen

Liquid hydrogen tanks for cars, producing for example the BMW Hydrogen 7. Japan has a liquid hydrogen (LH2) storage site in Kobe port.[6] Hydrogen is liquefied by reducing its temperature to −253 °C, similar to liquefied natural gas (LNG) which is stored at −162 °C. A potential efficiency loss of only 12.79% can be achieved, or 4.26 kW⋅h/kg out of 33.3 kW⋅h/kg.[7]

## Chemical storage

Hydrogen gravimetric capacity of proposed storage materials for hydrogen fuel as a function of hydrogen release temperature. The targets have since been lowered.[8]

Regeneration of storage material is problematic. A large number of chemical storage systems have been investigated. H2 release can be induced by hydrolysis reactions or catalyzed dehydrogenation reactions. Illustrative storage compounds are hydrocarbons, boron hydrides, ammonia, and alane etc.[9] A most promising chemical approach is electrochemical hydrogen storage, as the release of hydrogen can be controlled by the applied electricity.[10] Most of the materials listed below can be directly used for electrochemical hydrogen storage.

Nanomaterials, particularly those produced by ball mill and severe plastic deformation, offer an alternative that overcomes the two major barriers of bulk materials, rate of sorption and activation.[11] High-entropy alloy materials such as TiZrCrMnFeNi also show advantages of fast and reversible hydrogen storage at room temperature with good storage capacity for stationary applications.[12][13]

Enhancement of sorption kinetics and storage capacity can be improved through nanomaterial-based catalyst doping, as shown in the work of the Clean Energy Research Center in the University of South Florida.[14] This research group studied LiBH4 doped with nickel nanoparticles and analyzed the weight loss and release temperature of the different species. They observed that an increasing amount of nanocatalyst lowers the release temperature by approximately 20 °C and increases the weight loss of the material by 2-3%. The optimum amount of Ni particles was found to be 3 mol%, for which the temperature was within the limits established (around 100 °C) and the weight loss was notably greater than the undoped species.

The rate of hydrogen sorption improves at the nanoscale due to the short diffusion distance in comparison to bulk materials. They also have favorable surface-area-to-volume ratio.

The release temperature of a material is defined as the temperature at which the desorption process begins. The energy or temperature to induce release affects the cost of any chemical storage strategy. If the hydrogen is bound too weakly, the pressure needed for regeneration is high, thereby cancelling any energy savings. The target for onboard hydrogen fuel systems is roughly <100 °C for release and <700 bar for recharge (20–60 kJ/mol H2).[15] A modified van 't Hoff equation, relates temperature and partial pressure of hydrogen during the desorption process. The modifications to the standard equation are related to size effects at the nanoscale.

ln⁡(pH2)=ΔH(r)RT+3VmγrRT+ΔS(r)R

Where pH2 is the partial pressure of hydrogen, ΔH is the enthalpy of the sorption process (exothermic), ΔS is the change in entropy, R is the ideal gas constant, T is the temperature in Kelvin, Vm is the molar volume of the metal, r is the radius of the nanoparticle and γ is the surface free energy of the particle.

From the above relation we see that the enthalpy and entropy change of desorption processes depend on the radius of the nanoparticle. Moreover, a new term is included that takes into account the specific surface area of the particle and it can be mathematically proven that a decrease in particle radius leads to a decrease in the release temperature for a given partial pressure.[16]

### Hydrogenation of CO2

Hydrogenation of CO2 to methanol has been evaluated for hydrogen storage. Barriers of CO2 hydrogenation includes purification of captured CO2, H2 source from splitting water and energy inputs for hydrogenation. For industrial applications, CO2 is often converted to methanol. Until now, much progress has been made for CO2 to C1 molecules. However, CO2 to high value molecules still face many roadblocks and the future of CO2 hydrogenation depends on the advancement of catalytic technologies.[17]

### Metal hydrides

Metal hydride hydrogen storage

Metal hydrides, such as MgH2, NaAlH4, LiAlH4, LiH, LaNi5H6, TiFeH2, ammonia borane, and palladium hydride represent sources of stored hydrogen. There are three main classes of metal hydrides:[18][19]

* Inter-metallic Hydrides: exhibit fast kinetics and moderate hydrogen capacities. Such as LaNi5H6, TiFeH2.
* Complex Hydrides: capable of higher hydrogen storage capacities but require catalysts. Such as NaAlH4, LiBH4.
* Lightweight Hydrides: offer high gravimetric hydrogen storage but require high temperatures for desorption. Such as MgH2, CaH2.

Here are the properties of some metal hydrides:[20]

Metal Hydride  | H₂ Capacity (wt%)  | Absorption Temp (°C)  | Desorption Temp (°C)  | Applications

|
|
|
|

LaNi5H6 | 1.5-2.0  | 30-60  | 50-100  | Stationary Storage, Fuel Cells
NaAlH4 | 5.6  | 100-150  | 200-250  | Solid-State Hydrogen Batteries
MgH2 | 7.6  | 300-400  | >300  | High-Density Hydrogen Storage

Again the persistent problems are the % weight of H2 that they carry and the reversibility of the storage process.[21] Some are easy-to-fuel liquids at ambient temperature and pressure, whereas others are solids which could be turned into pellets. These materials have good energy density, although their specific energy is often worse than the leading hydrocarbon fuels.

An alternative method for lowering dissociation temperatures is doping with activators. This strategy has been used for aluminium hydride, but the complex synthesis makes the approach unattractive.[22]

Proposed hydrides for use in a hydrogen economy include simple hydrides of magnesium[23] or transition metals and complex metal hydrides, typically containing sodium, lithium, or calcium and aluminium or boron. Hydrides chosen for storage applications provide low reactivity (high safety) and high hydrogen storage densities. Leading candidates are lithium hydride, sodium borohydride, lithium aluminium hydride and ammonia borane. A French company McPhy Energy is developing the first industrial product, based on magnesium hydride, already sold to some major clients such as Iwatani and ENEL.[citation needed]

Reversible hydrogen storage is exhibited by frustrated Lewis pairs.[24][25][26]

Phosphino borane hydrogenstorage

The phosphino-borane on the left accepts one equivalent of hydrogen at one atmosphere and 25 °C and expels it again by heating to 100 °C. The storage capacity is 0.25 wt%.

#### Selected advances using metal hydrides

### Aluminium

Main article: Chemistry:Aluminium

Hydrogen is produced by hydrolysis of aluminium. It was previously believed that, to react with water, aluminium must be stripped of its natural oxide passivation layer,[27] or mixing with gallium (which produces aluminium nanoparticles that allow 90% of the aluminium to react).[28] It has since been demonstrated that efficient reaction is possible by increasing the temperature and pressure of the reaction.[29] The byproduct of the reaction to create hydrogen is aluminium oxide, which can be recycled back into aluminium with the Hall–Héroult process, making the reaction theoretically renewable. Although this requires electrolysis, which consumes a large amount of energy, the energy is then stored in the aluminium (and released when the aluminium is reacted with water).

### Magnesium

Traditional MgH2 stores 7.6 wt% hydrogen, but its high desorption temperature (>300 °C) limits applications. Mg-Ti-V nanocomposites can lower the desorption temperature to below 200 °C. Carbon-coordinated MgH2 exhibits 80% of improvement on cycling stability over 1000 cycles.[30]

LiBH4 \+ MgH2 composites stored about 11 wt% of hydrogen, one of the highest capacities reported. And ammonia borane (H₃NBH₃) releases 12 wt% hydrogen at moderate temperatures (~100–150 °C).[19]

Mg-based hydrogen storage materials include pure Mg, Mg-based alloys, and Mg-based composites.[31] Nonetheless, the inferior hydrogen absorption/desorption kinetics rooting in the overly undue thermodynamic stability of metal hydride make the Mg-based hydrogen storage alloys currently not appropriate for the real applications, and therefore, massive attempts have been dedicated to overcoming these shortages. Some sample preparation methods, such as smelting, powder sintering, diffusion, mechanical alloying, the hydriding combustion synthesis method, surface treatment, and heat treatment, etc., have been broadly employed for altering the dynamic performance and cycle life of Mg-based hydrogen storage alloys. Besides, some intrinsic modification strategies, including alloying,[32][33][34][35] nanostructuring,[36][37][38] doping by catalytic additives,[39][40] and acquiring nanocomposites with other hydrides,[41][42] etc., have been mainly explored for intrinsically boosting the performance of Mg-based hydrogen storage alloys.[43] Like aluminium, magnesium also reacts with water to produce hydrogen.[44]

Of the primary hydrogen storage alloys progressed formerly, Mg and Mg-based hydrogen storage materials are believed to provide the remarkable possibility of the practical application, on account of the advantages as following: 1) the resource of Mg is plentiful and economical. Mg element exists abundantly and accounts for ≈2.35% of the earth's crust with the rank of the eighth; 2) low density of merely 1.74 g cm-3; 3) superior hydrogen storage capacity. The theoretical hydrogen storage amounts of the pure Mg is 7.6 wt % (weight percent),[45][46][47] and the Mg2Ni is 3.6 wt%, respectively.[43]

### Alanates-based systems

Lithium alanate (LiAlH4) was synthesized for the first time in 1947 by dissolution of lithium hydride in an ether solution of aluminium chloride.[48] LiAlH4 has a theoretical gravimetric capacity of 10.5 wt %H2 and dehydrogenates in the following three steps:[49][50][51] 3LiAlH4 ↔ Li3AlH6 \+ 3H2 \+ 2Al (423–448 K; 5.3 wt %H2; ∆H = −10 kJ·mol−1 H2); Li3AlH6 ↔ 3LiH + Al + 1.5H2 (453–493 K; 2.6 wt %H2; ∆H = 25 kJ·mol−1 H2); 3LiH + 3Al ↔ 3LiAl + 3/2H2 (>673 K; 2.6 wt %H2; ∆H = 140 kJ·mol−1 H2).[52] The first two steps lead to a total amount of hydrogen released equal to 7.9 wt %, which could be attractive for practical applications, but the working temperatures and the desorption kinetics are still far from the practical targets. Several strategies have been applied in the last few years to overcome these limits, such as ball-milling and catalysts additions.[53][54][55][56][57][52]

Potassium Alanate (KAlH4) was first prepared by Ashby et al.[58] by one-step synthesis in toluene, tetrahydrofuran, and diglyme. Concerning the hydrogen absorption and desorption properties, this alanate was only scarcely studied. Morioka et al.,[59] by temperature programmed desorption (TPD) analyses, proposed the following dehydrogenation mechanism: 3KAlH4 →K3AlH6 \+ 2Al + 3H2 (573 K, ∆H = 55 kJ·mol−1 H2; 2.9 wt %H2), K3AlH6 → 3KH + Al + 3/2H2 (613 K, ∆H = 70 kJ·mol−1 H2; 1.4 wt %H2), 3KH → 3K + 3/2H2 (703 K, 1.4 wt %H2). These reactions were demonstrated reversible without catalysts addition at relatively low hydrogen pressure and temperatures. The addition of TiCl3 was found to decrease the working temperature of the first dehydrogenation step of 50 K,[60] but no variations were recorded for the last two reaction steps.[52]

### Organic hydrogen carriers

Main article: Physics:Liquid organic hydrogen carriers

Reversible hydrogenation of N-ethylcarbazole.

Unsaturated organic compounds can store huge amounts of hydrogen. These Liquid Organic Hydrogen Carriers (LOHC) are hydrogenated for storage and dehydrogenated again when the energy/hydrogen is needed. Using LOHCs, relatively high gravimetric storage densities can be reached (about 6 wt-%) and the overall energy efficiency is higher than for other chemical storage options such as producing methane from the hydrogen.[61] Both hydrogenation and dehydrogenation of LOHCs requires catalysts.[62] It was demonstrated that replacing hydrocarbons by hetero-atoms, like N, O etc. improves reversible de/hydrogenation properties.

#### Cycloalkanes

Cycloalkanes have relatively high hydrogen capacity (6-8 wt %).[62] Heterocyclic aromatic compounds (or N-Heterocycles) are also appropriate for this task.[63] but many others do exist.[64] Dibenzyltoluene, which is already used as a heat transfer fluid in industry, was identified as potential LOHC. With a wide liquid range between -39 °C (melting point) and 390 °C (boiling point) and a hydrogen storage density of 6.2 wt% dibenzyltoluene is ideally suited as LOHC material.[65] Formic acid has been suggested as a promising hydrogen storage material with a 4.4wt% hydrogen capacity.[66]

Cycloalkanes reported as LOHC include cyclohexane, methyl-cyclohexane and decalin. The dehydrogenation of cycloalkanes is highly endothermic (63-69 kJ/mol H2), which means this process requires high temperature.[62] Dehydrogenation of decalin is the most thermodynamically favored among the three cycloalkanes, and methyl-cyclohexane is second because of the presence of the methyl group.[67] The dehydrogenation of cycloalkanes is a mature area. Nickel-, molybdenum-, andcat platinum-based catalysts are established. Coking remains a challenge.[68][69]

#### N-Heterocycles

The temperature required for hydrogenation and dehydrogenation drops significantly for heterocycles vs simple carbocycles.[70] Among all the N-heterocycles, the saturated-unsaturated pair of dodecahydro-N-ethylcarbazole (12H-NEC) and NEC has been considered as a promising candidate for hydrogen storage with a fairly large hydrogen content (5.8wt%).[71] The figure on the top right shows dehydrogenation and hydrogenation of the 12H-NEC and NEC pair. The standard catalyst for NEC to 12H-NEC is Ru and Rh based. The selectivity of hydrogenation can reach 97% at 7 MPa and 130 °C-150 °C.[62] Although N-Heterocyles can optimize the unfavorable thermodynamic properties of cycloalkanes, a lot of issues remain unsolved, such as high cost, high toxicity and kinetic barriers etc.[62]

The imidazolium ionic liquids such alkyl(aryl)-3-methylimidazolium N-bis(trifluoromethanesulfonyl)imidate salts can reversibly add 6–12 hydrogen atoms in the presence of classical Pd/C or Ir0 nanoparticle catalysts and can be used as alternative materials for on-board hydrogen-storage devices. These salts can hold up to 30 g L−1 of hydrogen at atmospheric pressure.[72]

#### Formic acid

Formic acid is a highly effective hydrogen storage material, although its H2density is low. Carbon monoxide free hydrogen has been generated in a very wide pressure range (1–600 bar). A homogeneous catalytic system based on water-soluble ruthenium catalysts selectively decompose HCOOH into H2 and CO2 in aqueous solution.[73] This catalytic system overcomes the limitations of other catalysts (e.g. poor stability, limited catalytic lifetimes, formation of CO) for the decomposition of formic acid making it a viable hydrogen storage material.[74] And the co-product of this decomposition, carbon dioxide, can be used as hydrogen vector by hydrogenating it back to formic acid in a second step. The catalytic hydrogenation of CO2 has long been studied and efficient procedures have been developed.[75][76] Formic acid contains 53 g L−1 hydrogen at room temperature and atmospheric pressure. By weight, pure formic acid stores 4.3 wt% hydrogen. Pure formic acid is a liquid with a flash point 69 °C (cf. gasoline −40 °C, ethanol 13 °C). 85% formic acid is not flammable.

### Ammonia and related compounds

#### Ammonia

Ammonia (NH3) releases H2 in an appropriate catalytic reformer. Ammonia provides high hydrogen storage densities as a liquid with mild pressurization and cryogenic constraints: It can also be stored as a liquid at room temperature and pressure when mixed with water. Ammonia is the second most commonly produced chemical in the world and a large infrastructure for making, transporting, and distributing ammonia exists. Ammonia can be reformed to produce hydrogen with no harmful waste, or can mix with existing fuels and under the right conditions burn efficiently. Since there is no carbon in ammonia, no carbon by-products are produced; thereby making this possibility a "carbon neutral" option for the future. Pure ammonia burns poorly at the atmospheric pressures found in natural gas fired water heaters and stoves. Under compression in an automobile engine it is a suitable fuel for slightly modified gasoline engines. Ammonia is a suitable alternative fuel because it has 18.6 MJ/kg energy density at NTP and carbon-free combustion byproducts.[77]

Ammonia has several challenges to widespread adaption as a hydrogen storage material. Ammonia is a toxic gas with a potent odor at standard temperature and pressure.[78] Additionally, advances in the efficiency and scalability of ammonia decomposition are needed for commercial viability, as fuel cell membranes are highly sensitive to residual ammonia and current decomposition techniques have low yield rates.[79] A variety of transition metals can be used to catalyze the ammonia decomposition reaction, the most effective being ruthenium. This catalysis works through chemisorption, where the adsorption energy of N2 is less than the reaction energy of dissociation.[80] Hydrogen purification can be achieved in several ways. Hydrogen can be separated from unreacted ammonia using a permeable, hydrogen-selective membrane.[81] It can also be purified through the adsorption of ammonia, which can be selectively trapped due to its polarity.[82]

In September 2005 chemists from the Technical University of Denmark announced a method of storing hydrogen in the form of ammonia saturated into a salt tablet. They claim it will be an inexpensive and safe storage method.[83][needs update]

##### Positive attributes of Ammonia

* High theoretical energy density
* Wide spread availability
* Large scale commercial production
* Benign decomposition pathway to H2 and N2

##### Negative attributes of Ammonia

* Toxicity
* Corrosive
* High decomposition temperature leading to efficiency loss

#### Hydrazine

Hydrazine breaks down in the cell to form nitrogen and hydrogen.[84] Silicon hydrides and germanium hydrides are also candidates of hydrogen storage materials, as they can subject to energetically favored reaction to form covalently bonded dimers with loss of a hydrogen molecule.[85][86]

#### Amine boranes

Prior to 1980, several compounds were investigated for hydrogen storage including complex borohydrides, or aluminohydrides, and ammonium salts. These hydrides have an upper theoretical hydrogen yield limited to about 8.5% by weight. Amongst the compounds that contain only B, N, and H (both positive and negative ions), representative examples include: amine boranes, boron hydride ammoniates, hydrazine-borane complexes, and ammonium octahydrotriborates or tetrahydroborates. Of these, amine boranes (and especially ammonia borane) have been extensively investigated as hydrogen carriers. During the 1970s and 1980s, the U.S. Army and Navy funded efforts aimed at developing hydrogen/deuterium gas-generating compounds for use in the HF/DF and HCl chemical lasers, and gas dynamic lasers. Earlier hydrogen gas-generating formulations used amine boranes and their derivatives. Ignition of the amine borane(s) forms boron nitride (BN) and hydrogen gas. In addition to ammonia borane

## Physical storage

In this case hydrogen remains in physical forms, i.e., as gas, supercritical fluid, adsorbate, or molecular inclusions. Theoretical limitations and experimental results are considered[87] concerning the volumetric and gravimetric capacity of glass microvessels, microporous, and nanoporous media, as well as safety and refilling-time demands. Because hydrogen is the smallest molecule, it easily escapes from containers and during transfer from container to container. While it does not directly contribute to radiative forcing, hydrogen is estimated to have an effective 100-year global warming potential of Template:Plusminus due to its impact on processes such as atmospheric methane oxidation and tropospheric ozone production.[88][89]

### Zeolites

Zeolites are microporous and highly crystalline aluminosilicate materials. As they exhibit cage and tunnel structures, they offer the potential for the encapsulation of non-polar gases such as H2. In this system, hydrogen is physisorbed on the surface of the zeolite pores through a mechanism of adsorption that involves hydrogen being forced into the pores under pressure and low temperature.[90] Therefore, similar to other porous materials, its hydrogen storage capacity depends on the BET surface area, pore volume, the interaction of molecular hydrogen with the internal surfaces of the micropores, and working conditions such as pressure and temperature.[91]

Channel diameter is also one of the parameters determining this capacity, especially at high pressure. In this case, an effective material should exhibit a large pore volume and a channel diameter close to the kinetic diameter of the hydrogen molecule (dH=2.89 Å).[90]

Table below shows the hydrogen uptake of several zeolites at liquid nitrogen temperature (77K):

H2 uptake of several high surface area zeolites[92] Zeolite  | Framework Type (IZA Code)  | Pressure (bar)  | H2 Uptake (wt%)  | BET Surface Area (m2/g)

|
|
|
|

NaY (Si/Al = 2.4)  | FAU  | 0.57  | 0.37  |
HY (Si/Al = 2.7)  | FAU  | 0.95  | 0.56  |
MCM-41  |  | 1  | 0.58  | 1017
H-ZSM-5 (Si/Al = 40)  | MFI  | 0.92  | 0.71  | 418
H-SAPO-34  | CHA  | 0.92  | 1.09  | 547
H-CHA (Si/Al = 2.1)  | CHA  | 0.92  | 1.10  | 490
H-SSZ-13 (Si/Al = 11.6)  | CHA  | 0.92  | 1.28  | 638
NaA  | LTA  | 0.93  | 1.21  |
LiX (Si/Al = 1.4)  | FAU  | 0.60  | 0.88  |
NaX (Si/Al = 1.05)  | FAU  | 0.61  | 1.22  |
CaX (Si/Al = 1.4)  | FAU  | 1.01  | 1.25  | 669
Li-LSX (Si/Al = 1.0)  | FAU  | 1.01  | 1.50  | 717
Na-LSX (Si/Al = 1.0)  | FAU  | 1.01  | 1.46  | 642
K-LSX (Si/Al = 1.0)  | FAU  | 1.01  | 1.33  | 570

### Porous or layered carbon

Activated carbons are highly porous amorphous carbon materials with high apparent surface area. Hydrogen physisorption can be increased in these materials by increasing the apparent surface area and optimizing pore diameter to around 7 Å.[93] These materials are of particular interest due to the fact that they can be made from waste materials, such as cigarette butts which have shown great potential as precursor materials for high-capacity hydrogen storage materials.[94][95]

Graphene can store hydrogen efficiently. The H2 adds to the double bonds giving graphane. The hydrogen is released upon heating to 450 °C.[96][97]

Carbon nanotubes

To realize carbon materials as effective hydrogen storage technologies, carbon nanotubes (CNTs) have been doped with MgH2.[14] The metal hydride has proven to have a theoretical storage capacity (7.6 wt%) that fulfills the United States Department of Energy requirement of 6 wt%, but has limited practical applications due to its high release temperature. The proposed mechanism involves the creation of fast diffusion channels by CNTs within the MgH2 lattice. Fullerene substances are other carbonaceous nanomaterials that have been tested for hydrogen storage in this center. Fullerene molecules are composed of a C60 close-caged structure, that allows for hydrogenation of the double bonded carbons leading to a theoretical C60H60 isomer with a hydrogen content of 7.7 wt%. However, the release temperature in these systems is high (600 °C).

### Metal–organic frameworks

Metal–organic frameworks represent another class of synthetic porous materials that store hydrogen and energy at the molecular level. MOFs are highly crystalline inorganic-organic hybrid structures that contain metal clusters or ions (secondary building units) as nodes and organic ligands as linkers. When guest molecules (solvent) occupying the pores are removed during solvent exchange and heating under vacuum, porous structure of MOFs can be achieved without destabilizing the frame and hydrogen molecules will be adsorbed onto the surface of the pores by physisorption. Compared to traditional zeolites and porous carbon materials, MOFs have very high number of pores and surface area which allow higher hydrogen uptake in a given volume.[citation needed]

#### Factors influencing hydrogen storage ability

Temperature, pressure and composition of MOFs can influence their hydrogen storage ability. The adsorption capacity of MOFs is lower at higher temperature and higher at lower temperatures. With the rising of temperature, physisorption decreases and chemisorption increases.[98] For MOF-519 and MOF-520, the isosteric heat of adsorption decreased with pressure increase.[99] For MOF-5, both gravimetric and volumetric hydrogen uptake increased with increase in pressure.[98] The total capacity may not be consistent with the usable capacity under pressure swing conditions. For instance, MOF-5 and IRMOF-20, which have the highest total volumetric capacity, show the least usable volumetric capacity.[100] Absorption capacity can be increased by modification of structure. For example, the hydrogen uptake of PCN-68 is higher than PCN-61.[101] Porous aromatic frameworks (PAF-1), which is known as a high surface area material, can achieve a higher surface area by doping.[102]

#### Modification of MOFs

There are many different ways to modify MOFs, such as MOF catalysts, MOF hybrids, MOF with metal centers and doping. MOF catalysts have high surface area, porosity and hydrogen storage capacity. However, the active metal centers are low. MOF hybrids have enhanced surface area, porosity, loading capacity and hydrogen storage capacity. Nevertheless, they are not stable and lack active centers. Doping in MOFs can increase hydrogen storage capacity, but there might be steric effect and inert metals have inadequate stability. There might be formation of interconnected pores and low corrosion resistance in MOFs with metal centers, while they might have good binding energy and enhanced stability. These advantages and disadvantages for different kinds of modified MOFs show that MOF hybrids are more promising because of the good controllability in selection of materials for high surface area, porosity and stability.[98]

In 2006, chemists achieved hydrogen storage concentrations of up to 7.5 wt% in MOF-74 at a low temperature of 77 K.[103][104] MOF NOTT-112 exhibit 10 wt% at 77 bar (1,117 psi) and 77 K with .[105] Most articles about hydrogen storage in MOFs report hydrogen subitptake capacity at a temperature of 77K and a pressure of 1 bar because these conditions are commonly available and the binding energy between hydrogen and the MOF at this temperature is large compared to the thermal vibration energy. Varying several factors such as surface area, pore size, catenation, ligand structure, and sample purity can result in different amounts of hydrogen uptake in MOFs.

NU-1501-Al, an ultraporous metal–organic framework (MOF) has a hydrogen delivery capacity of 14.0% w/w, 46.2 g/litre.[106][107]

### Cryo-compressed

Cryo-compressed storage of hydrogen is the only technology that meets 2015 DOE targets for volumetric and gravimetric efficiency (see "CcH2" on slide 6 in[108]).

Furthermore, another study has shown that cryo-compression exhibits interesting cost advantages: ownership cost (price per mile) and storage system cost (price per vehicle) are actually the lowest when compared to any other technology (see third row in slide 13 of[109]).

Consequently, it has been demonstrated that a high driving range could be achieved with a cryo-compressed tank : more than 650 miles (1,050 km) were driven with a full tank mounted on a hydrogen-fueled engine of Toyota Prius.[110][111]

As of 2010, the BMW Group has started a thorough component and system level validation of cryo-compressed vehicle storage on its way to a commercial product.[112]

### Cryo-supercritical

### Clathrate hydrates

H2 caged in a clathrate hydrate are stable at very high pressures. Some solid H2-containing hydrates form at ambient temperature and tens of bars in the presence of THF.[113][114] These clathrates have a theoretical maximum hydrogen densities of around 5 wt% and 40 kg/m3.

### Glass capillary arrays

Glass capillary arrays show potential for the safe infusion, storage and controlled release of hydrogen in mobile applications.[115][116] The C.En technology has achieved the United States Department of Energy (DOE) 2010 targets for on-board hydrogen storage systems.[117] DOE 2015 targets can be achieved using flexible glass capillaries and cryo-compressed method of hydrogen storage.[118]

### Glass microspheres

Hollow glass microspheres (HGM) can be utilized for controlled storage and release of hydrogen. HGMs with a diameter of 1 to 100 μm, a density of 1.0 to 2.0 gm/cc and a porous wall with openings of 10 to 1000 angstroms are considered for hydrogen storage. The advantages of HGMs for hydrogen storage are that they are nontoxic, light, cheap, recyclable, reversible, easily handled at atmospheric conditions, capable of being stored in a tank, and the hydrogen within is non-explosive.[119] Each of these HGMs is capable of containing hydrogen up to 150 MPa without the heaviness and bulk of a large pressurized tank. All of these qualities are favorable in vehicular applications. Beyond these advantages, HGMs are seen as a possible hydrogen solution due to hydrogen diffusivity having a large temperature dependence. At room temperature, the diffusivity is very low, and the hydrogen is trapped in the HGM. The disadvantage of HGMs is that to fill and outgas hydrogen effectively the temperature must be at least 300 °C which significantly increases the operational cost of HGM in hydrogen storage.[120] The high temperature can be partly attributed to glass being an insulator and having a low thermal conductivity; this hinders hydrogen diffusivity, and subsequently a higher temperature is required to achieve the desired storage capacity.

To make this technology more economically viable for commercial use, research is being done to increase the efficiency of hydrogen diffusion through the HGMs. One study done by Dalai et al. sought to increase the thermal conductivity of the HGM through doping the glass with cobalt. In doing so they increased the thermal conductivity from 0.0072 to 0.198 W/m-K at 10 wt% Co. Increases in hydrogen adsorption though were only seen up to 2 wt% Co (0.103 W/m-K) as the metal oxide began to cover pores in the glass shell. This study concluded with a hydrogen storage capacity of 3.31 wt% with 2 wt% Co at 200 °C and 10 bar.[119]

A study done by Rapp and Shelby sought to increase the hydrogen release rate through photo-induced outgassing in doped HGMs in comparison to conventional heating methods. The glass was doped with optically active metals to interact with the high-intensity infrared light. The study found that 0.5 wt% Fe3O4 doped 7070 borosilicate glass had hydrogen release increase proportionally to the infrared lamp intensity. In addition to the improvements to diffusivity by infrared alone, reactions between the hydrogen and iron-doped glass increased the Fe2+/Fe3+ ratio which increased infrared absorption therefore further increasing the hydrogen yield.[121]

As of 2020, the progress made in studying HGMs has increased its efficiency but it still falls short of Department of Energy targets for this technology. The operation temperatures for both hydrogen adsorption and release are the largest barrier to commercialization.[122]

## Stationary hydrogen storage

Unlike mobile applications, hydrogen density is not a huge problem for stationary applications. As for mobile applications, stationary applications can use established technology:

* Compressed hydrogen (CGH2) in a hydrogen tank[123]
* Liquid hydrogen in a (LH2) cryogenic hydrogen tank
* Slush hydrogen in a cryogenic hydrogen tank

### Underground hydrogen storage

'Available storage technologies, their capacity and discharge time.'[124]: 12

Underground hydrogen storage[125] is the practice of hydrogen storage in caverns, salt domes and depleted oil and gas fields. Large quantities of gaseous hydrogen have been stored in caverns by ICI for many years without any difficulties.[126] The storage of large quantities of liquid hydrogen underground can function as grid energy storage. The round-trip efficiency is approximately 40% (vs. 75–80% for pumped-hydro (PHES)), and the cost is slightly higher than pumped hydro, if only a limited number of hours of storage is required.[127] Another study referenced by a European staff working paper found that for large scale storage, the cheapest option is hydrogen at €140/MWh for 2,000 hours of storage using an electrolyser, salt cavern storage and combined-cycle power plant.[124]: 15 The European project Hyunder[128] indicated in 2013 that for the storage of wind and solar energy an additional 85 caverns are required as it cannot be covered by PHES and CAES systems.[129] A German case study on storage of hydrogen in salt caverns found that if the German power surplus (7% of total variable renewable generation by 2025 and 20% by 2050) would be converted to hydrogen and stored underground, these quantities would require some 15 caverns of 500,000 cubic metres each by 2025 and some 60 caverns by 2050 – corresponding to approximately one third of the number of gas caverns currently operated in Germany.[130] In the US, Sandia Labs are conducting research into the storage of hydrogen in depleted oil and gas fields, which could easily absorb large amounts of renewably produced hydrogen as there are some 2.7 million depleted wells in existence.[131]

Underground hydrogen storage is the practice of hydrogen storage in caverns,[132][133] salt domes and depleted oil/gas fields.[134][135] Large quantities of gaseous hydrogen have been stored in caverns for many years.[136] The storage of large quantities of hydrogen underground in solution-mined salt domes,[137] aquifers,[138] excavated rock caverns, or mines can function as grid energy storage,[139] essential for the hydrogen economy.[140] By using a turboexpander the electricity needs for compressed storage on 200 bar amounts to 2.1% of the energy content.[141]

#### Salt caverns

The Chevron Phillips Clemens Terminal in Texas has stored hydrogen since the 1980s in a solution-mined salt cavern. The cavern roof is about 2,800 feet (850 m) underground. The cavern is a cylinder with a diameter of 160 feet (49 m), a height of 1,000 feet (300 m), and a usable hydrogen capacity of 1,066 million cubic feet (30.2×10 ~~^~~ 6 m3), or 2,520 metric tons (2,480 long tons; 2,780 short tons).[142]

Salt caverns are artificially created by injecting water from the surface into a well in the rock salt, where rock salt is a polycrystalline material made of NaCl, halite. Locations such as salt domes or bedded salt are usually picked for salt caverns' creation. Salt caverns can reach a maximum depth of 2000 m and a maximum volume capacity of 1,000,000 m3. The frequency of injection and withdrawal cycles ranges between 10 and 12 cycles per year. The leak rate is around 1%.[143][144]

Due to the physiochemical properties of the rock salt, salt caverns exhibit multiple advantages. Key characteristics are low water content, low porosity and permeability, and its chemical inertia towards hydrogen.[145] Permeability is a key parameter in underground hydrogen storage, which affects its ability to seal. Though studies have found dilatancy and extensional fracture can cause significant permeability increase, rock salt crystal's recrystallization, which is a grain boundaries healing process, may contribute to its mechanical stiffness and permeability recovery.[146] Its plastic properties prevent the formation and spread of fractures and protect it from losing its tightness, which is particularly important for hydrogen storage.[145] Some of the disadvantages of salt caverns include lower storage capacity, large amount of water needed, and the effect of corrosion. Cushion gas is needed to avoid creep due to pressure drop when withdrawing gas from the reservoir. Though the need for cushion gas is relatively small, around 20%, the operational cost can still add up when working with a larger storage capacity. Cost is another big concern, where the cost of construction and operation are still high.[144][147]

Though people have experience with storing natural gas, storing hydrogen is a lot more complex. Factors such as hydrogen diffusivity in solids cause restrictions in salt cavern storage. Microbial activity is under extensive research worldwide because of its impact on hydrogen loss. As a result of methanogenic bacteria's bacterial metabolism, carbon dioxide and hydrogen are consumed and methane is produced, which leads to the loss of hydrogen stored in the salt caverns.[148][147]

#### Development

* Sandia National Laboratories released in 2011 a life-cycle cost analysis framework for geologic storage of hydrogen.[149]
* The European project Hyunder[150] indicated in 2013 that for the storage of wind and solar energy an additional 85 caverns are required as it cannot be covered by pumped-storage hydroelectricity and compressed air energy storage systems.[151]
* ETI released in 2015 a report The role of hydrogen storage in a clean responsive power system noting that the UK has sufficient salt bed resources to provide tens of GWe.[152]
* RAG Austria AG finished a hydrogen storage project in a depleted oil and gas field in Austria in 2017, and is conducting its second project "Underground Sun Conversion".[153]

A cavern sized 800 m tall and 50 m diameter can hold hydrogen equivalent to 150 GWh.[154][155]

### Power to gas

Power to gas is a technology which converts electrical power to a gas fuel. There are two methods: the first is to use the electricity for water splitting and inject the resulting hydrogen into the natural gas grid; the second, less efficient method is used to convert carbon dioxide and hydrogen to methane, (see natural gas) using electrolysis and the Sabatier reaction. A third option is to combine the hydrogen via electrolysis with a source of carbon (either carbon dioxide or carbon monoxide from biogas, from industrial processes or via direct air-captured carbon dioxide) via biomethanation,[156][157] where biomethanogens (archaea) consume carbon dioxide and hydrogen and produce methane within an anaerobic environment. This process is highly efficient, as the archaea are self-replicating and only require low-grade (60 °C) heat to perform the reaction.

Another process has also been achieved by SoCalGas to convert the carbon dioxide in raw biogas to methane in a single electrochemical step, representing a simpler method of converting excess renewable electricity into storable natural gas.[158]

The UK has completed surveys and is preparing to start injecting hydrogen into the gas grid as the grid previously carried 'town gas' which is a 50% hydrogen-methane gas formed from coal. Auditors KPMG found that converting the UK to hydrogen gas could be £150bn to £200bn cheaper than rewiring British homes to use electric heating powered by lower-carbon sources.[159]

Excess power or off peak power generated by wind generators or solar arrays can then be used for load balancing in the energy grid. Using the existing natural gas system for hydrogen, Fuel cell maker Hydrogenics and natural gas distributor Enbridge have teamed up to develop such a power to gas system in Canada.[160]

Pipeline storage of hydrogen where a natural gas network is used for the storage of hydrogen. Before switching to natural gas, the German gas networks were operated using towngas, which for the most part (60-65%) consisted of hydrogen. The storage capacity of the German natural gas network is more than 200,000 GW·h which is enough for several months of energy requirement. By comparison, the capacity of all German pumped storage power plants amounts to only about 40 GW·h. The transport of energy through a gas network is done with much less loss (<0.1%) than in a power network (8%). The use of the existing natural gas pipelines for hydrogen was studied by NaturalHy.[161]

## Automotive onboard hydrogen storage

Portability is one of the biggest challenges in the automotive industry, where high density storage systems are problematic due to safety concerns. High-pressure tanks weigh much more than the hydrogen they can hold. For example, in the 2014 Toyota Mirai, a full tank contains only 5.7% hydrogen, the rest of the weight being the tank.[162]

### Fuel cells and storage

Due to its clean-burning characteristics, hydrogen is a clean fuel alternative for the automotive industry. Hydrogen-based fuel could significantly reduce the emissions of greenhouse gases such as CO2, SO2 and NOx. Three problems for the use of hydrogen fuel cells (HFC) are efficiency, size, and safe onboard storage of the gas. Other major disadvantages of this emerging technology involve cost, operability and durability issues, which still need to be improved from the existing systems. To address these challenges, the use of nanomaterials has been proposed as an alternative option to the traditional hydrogen storage systems. The use of nanomaterials could provide a higher density system and increase the driving range towards the target set by the DOE at 300 miles. Carbonaceous materials such as carbon nanotube and metal hydrides are the main focus of research. They are currently being considered for onboard storage systems due to their versatility, multi-functionality, mechanical properties and low cost with respect to other alternatives.[163]

### Other advantages of nanomaterials in fuel cells

The introduction of nanomaterials in onboard hydrogen storage systems may be a major turning point in the automotive industry. However, storage is not the only aspect of the fuel cell to which nanomaterials may contribute. Different studies have shown that the transport and catalytic properties of Nafion membranes used in HFCs can be enhanced with TiO2/SnO2 nanoparticles.[163] The increased performance is caused by an improvement in hydrogen splitting kinetics due to catalytic activity of the nanoparticles. Furthermore, this system exhibits faster transport of protons across the cell which makes HFCs with nanoparticle composite membranes a promising alternative.

Another application of nanomaterials in water splitting has been introduced by a research group at Manchester Metropolitan University in the UK using screen-printed electrodes consisting of a graphene-like material.[164] Similar systems have been developed using photoelectrochemical techniques.

### Pressurized hydrogen gas

See also: Physics:Compressed hydrogen

Pressurized gas pipelines are always made of steel and operate at much lower pressures than tube trailers.

### Liquid hydrogen

See also: Liquid hydrogen

Alternatively, higher volumetric energy density liquid hydrogen or slush hydrogen may be used. However, liquid hydrogen is cryogenic and boils at 20.268 K (−252.882 °C or −423.188 °F). Cryogenic storage cuts weight but requires large liquification energies. The liquefaction process, involving pressurizing and cooling steps, is energy intensive.[165] The liquefied hydrogen has lower energy density by volume than gasoline by approximately a factor of four, because of the low density of liquid hydrogen – there are actually more oxidizable hydrogen atoms in a litre of gasoline (116 grams) than there are in a litre of pure liquid hydrogen (71 grams). Like any other liquid at cryogenic temperatures, the liquid hydrogen storage tanks must also be well insulated to minimize boil off.

Japan has a liquid hydrogen (LH2) storage facility at a terminal in Kobe, and was expected to receive the first shipment of liquid hydrogen via LH2 carrier in 2020.[166] Hydrogen is liquified by reducing its temperature to −253 °C, similar to liquified natural gas (LNG) which is stored at −162 °C. A potential efficiency loss of 12.79% can be achieved, or 4.26 kWh/kg out of 33.3 kWh/kg.[167]

### Liquid organic hydrogen carriers (LOHC)

Main article: Physics:Liquid organic hydrogen carriers

## Research

The Hydrogen Storage Materials research field is vast, having tens of thousands of published papers.[168] According to Papers in the 2000 to 2015 period collected from Web of Science and processed in VantagePoint bibliometric software, a scientometric review of research in hydrogen storage materials was constituted. According to the literature, hydrogen energy went through a hype-cycle type of development in the 2000s. Research in Hydrogen Storage Materials grew at increasing rates from 2000 to 2010. Afterwards, growth continued but at decreasing rates, and a plateau was reached in 2015. Looking at individual country output, there is a division between countries that after 2010 inflected to a constant or slightly declining production, such as the European Union countries, the US and Japan, and those whose production continued growing until 2015, such as China and South Korea. The countries with most publications were China, the EU and the United States, followed by Japan. China kept the leading position throughout the entire period, and had a higher share of hydrogen storage materials publications in its total research output.[169]

Among materials classes, Metal-Organic Frameworks were the most researched materials, followed by Simple Hydrides. Three typical behaviors were identified:

1. New materials, researched mainly after 2004, such as MOFs and Borohydrides;
2. Classic materials, present through the entire period with growing number of papers, such as Simple Hydrides, and
3. Materials with stagnant or declining research through the end of the period, such as AB5 alloys and Carbon Nanotubes.[169]

However, current physisorption technologies are still far from being commercialized. The experimental studies are executed for small samples less than 100 g.[170] The described technologies require high pressure and/or low temperatures as a rule. Therefore, at their current state of the art these techniques are not considered as a separate novel technology but as a type of valuable add-on to current compression and liquefaction methods.

Physisorption processes are reversible since no activation energy is involved and the interaction energy is very low. In materials such as metal–organic frameworks, porous carbons, zeolites, clathrates, and organic polymers, hydrogen is physisorbed on the surface of the pores. In these classes of materials, the hydrogen storage capacity mainly depends on the surface area and pore volume. The main limitation of use of these sorbents as H2storage materials is weak van der Waals interaction energy between hydrogen and the surface of the sorbents. Therefore, many of the physisorption based materials have high storage capacities at liquid nitrogen temperature and high pressures, but their capacities become very low at ambient temperature and pressure.[171]

LOHC, liquid organic hydrogen storage systems is a promising technique for future hydrogen storage. LOHC are organic compounds that can absorb and release hydrogen through chemical reactions. These compounds are characterized by the fact that they can be loaded and un-loaded with considerable amounts of hydrogen in a cyclic process. In principle, every unsaturated compound (organic molecules with C-C double or triple bonds) can take up hydrogen during hydrogenation. This technique ensures that the release of compounds into the atmosphere are entirely avoided in hydrogen storage. Therefore, LOHCs is an attractive way to provide wind and solar energy for mobility applications in the form of liquid energy carrying molecules of similar energy storage densities and manageability as today's fossil fuels.[172][obsolete source]

## See also

* Cascade storage system
* Cryo-adsorption
* Electrochemical hydrogen compressor
* Hydrogenography
* Hydrogen energy plant in Denmark
* Industrial gas
* Tunable nanoporous carbon
* Combined cycle hydrogen power plant
* Grid energy storage
* Hydrogen infrastructure
* Hydrogen economy
* Hydrogen turboexpander-generator
* Power-to-gas
* Timeline of hydrogen technologies

## References

1. ↑ Satyapal, Sunita, John Petrovic and George Thomas (2007-04-01). "Gassing Up with Hydrogen" (in en). Scientific American 296 (4): 80–87. doi:10.1038/scientificamerican0407-80. PMID 17479634. Bibcode: 2007SciAm.296d..80S. https://www.scientificamerican.com/article/gassing-up-with-hydrogen/. Retrieved 2025-08-09.
2. ↑ "Investigation of Wall Thickness Design Method of Anti-Buckling Liner of Type IV Hydrogen Storage Tanks". 2024-02-24. doi:10.2139/ssrn.4737797. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4737797.
3. ↑ Eberle, Ulrich; Mueller, Bernd; von Helmolt, Rittmar (2012). "Fuel cell electric vehicles and hydrogen infrastructure: status 2012". Energy & Environmental Science 5 (10): 8780. doi:10.1039/C2EE22596D. Bibcode: 2012EnEnS...5.8780E. https://www.researchgate.net/publication/233987484. Retrieved 2014-12-19.
4. ↑ "FCX Clarity". http://world.honda.com/FCXClarity/package/index.html.
5. ↑ "X-TRAIL FCV '03 model". http://www.nissan-global.com/EN/TECHNOLOGY/INTRODUCTION/DETAILS/XTRAIL-FCV/index.html.
6. ↑ Savvides, Nick (2017-01-11). "Japan plans to use imported liquefied hydrogen to fuel Tokyo 2020 Olympics". IHS Markit Maritime Portal. https://fairplay.ihs.com/ship-construction/article/4280251/japan-plans-to-use-imported-liquefied-hydrogen-to-fuel-tokyo-2020-olympics.
7. ↑ Sadaghiani, Mirhadi S. (2 March 2017). "Introducing and energy analysis of a novel cryogenic hydrogen liquefaction process configuration". International Journal of Hydrogen Energy 42 (9): 6033–6050. doi:10.1016/j.ijhydene.2017.01.136. Bibcode: 2017IJHE...42.6033S.
8. ↑ "Target Explanation Document: Onboard Hydrogen Storage forLight-Duty Fuel Cell Vehicles". US Department of Energy. https://www.energy.gov/sites/default/files/2017/05/f34/fcto_targets_onboard_hydro_storage_explanation.pdf.
9. ↑ Sunita, Satyapal (2007). "The U.S. Department of Energy's National Hydrogen Storage Project: Progress towards meeting hydrogen-powered vehicle requirements". Catalysis Today 120 (3–4): 246–256. doi:10.1016/j.cattod.2006.09.022. https://zenodo.org/record/1258818. Retrieved 2019-06-27.
10. ↑ Eftekhari, Ali; Baizeng, Fang (2017). "Electrochemical hydrogen storage: Opportunities for fuel storage, batteries, fuel cells, and supercapacitors". International Journal of Hydrogen Energy 42 (40): 25143–25165. doi:10.1016/j.ijhydene.2017.08.103. Bibcode: 2017IJHE...4225143E.
11. ↑ Edalati, K.; Akiba, E.; Botta, W.J.; Estrin, Y.; Floriano, R.; Fruchart, D.; Grosdidier, T.; Horita, Z. et al. (May 2023). "Impact of severe plastic deformation on kinetics and thermodynamics of hydrogen storage in magnesium and its alloys". Journal of Materials Science and Technology 146: 221–239. doi:10.1016/j.jmst.2022.10.068.
12. ↑ Edalati, P.; Floriano, R.; Mohammadi, A.; Li, Y.; Zepon, G.; Li, H.W.; Edalati, K. (March 2020). "Reversible room temperature hydrogen storage in high-entropy alloy TiZrCrMnFeNi". Scripta Materialia 178: 387–390. doi:10.1016/j.scriptamat.2019.12.009. Bibcode: 2020ScrMa.178..387E.
13. ↑ Dangwal, S.; Ikeda, Y.; Grabowski, B.; Edalati, K. (August 2024). "Machine learning to design high-entropy alloys with desired enthalpy for room-temperature hydrogen storage: Comparison with density functional theory and experiments". Chemical Engineering Journal 493. doi:10.1016/j.cej.2024.152606.
14. ↑ 14.0 14.1 Niemann, Michael U.; Srinivasan, Sesha S.; Phani, Ayala R.; Kumar, Ashok; Goswami, D. Yogi; Stefanakos, Elias K. (2008). "Nanomaterials for hydrogen storage applications: a review". Journal of Nanomaterials 2008: 1–9. doi:10.1155/2008/950967.
15. ↑ EU Hydrogen Storage . (PDF)
16. ↑ Sunandana, C.S. (2007). "Nanomaterials for hydrogen storage". Resonance 12 (5): 31–36. doi:10.1007/s12045-007-0047-9.
17. ↑ WEATHERBEE, G (October 1982). "Hydrogenation of CO2 on group VIII metals II. Kinetics and mechanism of CO2 hydrogenation on nickel". Journal of Catalysis 77 (2): 460–472. doi:10.1016/0021-9517(82)90186-5. ISSN 0021-9517. Bibcode: 1982JCat...77..460W.
18. ↑ Schlapbach, Louis; Züttel, Andreas (November 2001). "Hydrogen-storage materials for mobile applications" (in en). Nature 414 (6861): 353–358. doi:10.1038/35104634. ISSN 0028-0836. PMID 11713542. Bibcode: 2001Natur.414..353S. https://www.nature.com/articles/35104634.
19. ↑ 19.0 19.1 Orimo, Shin-ichi; Nakamori, Yuko; Eliseo, Jennifer R.; Züttel, Andreas; Jensen, Craig M. (2007-10-01). "Complex Hydrides for Hydrogen Storage" (in en). Chemical Reviews 107 (10): 4111–4132. doi:10.1021/cr0501846. ISSN 0009-2665. PMID 17848101. https://pubs.acs.org/doi/10.1021/cr0501846.
20. ↑ Li, Hai-Wen; Yan, Yigang; Orimo, Shin-ichi; Züttel, Andreas; Jensen, Craig M. (2011-01-24). "Recent Progress in Metal Borohydrides for Hydrogen Storage" (in en). Energies 4 (1): 185–214. doi:10.3390/en4010185. ISSN 1996-1073. Bibcode: 2011Energ...4..185L.
21. ↑ DOE Metal hydrides . eere.energy.gov (2008-12-19)
22. ↑ Graetz, J.; Reilly, J.; Sandrock, G.; Johnson, J.; Zhou, W. M.; Wegrzyn, J. (2006). "Aluminum Hydride, A1H3, As a Hydrogen Storage Compound". doi:10.2172/899889. https://digital.library.unt.edu/ark:/67531/metadc887034/.
23. ↑ CNRS Institut Neel H2 Storage . Neel.cnrs.fr
24. ↑ Welch, G. C.; Juan, R. R. S.; Masuda, J. D.; Stephan, D. W. (2006). "Reversible, Metal-Free Hydrogen Activation". Science 314 (5802): 1124–6. doi:10.1126/science.1134230. PMID 17110572. Bibcode: 2006Sci...314.1124W.
25. ↑ Elizabeth Wilson H2 Activation, Reversibly Metal-free compound readily breaks and makes hydrogen , Chemical & Engineering News November 20, 2006
26. ↑ Mes stands for a mesityl substituent and C6F5 for a pentafluorophenyl group, see also tris(pentafluorophenyl)boron
27. ↑ "New process generates hydrogen from aluminium alloy to run engines, fuel cells". https://phys.org/news/2007-05-hydrogen-aluminium-alloy-fuel-cells.html.
28. ↑ Blain, Loz (2022-09-02). "Aluminum-gallium powder bubbles hydrogen out of dirty water" (in en-US). https://newatlas.com/energy/aluminum-gallium-hydrogen-powder/.
29. ↑ Trowell, Keena A.; Goroshin, Sam; Frost, David L.; Bergthorson, Jeffrey M. (2020). "The use of supercritical water for the catalyst-free oxidation of coarse aluminum for hydrogen production" (in en). Sustainable Energy & Fuels 4 (11): 5628–5635. doi:10.1039/D0SE00996B. ISSN 2398-4902. https://xlink.rsc.org/?DOI=D0SE00996B. Retrieved 2022-09-06.
30. ↑ Yu, Yuan-Hsiang; Yeh, Jui-Ming; Liou, Shir-Joe; Chang, Yen-Po (January 2004). "Organo-soluble polyimide (TBAPP–OPDA)/clay nanocomposite materials with advanced anticorrosive properties prepared from solution dispersion technique" (in en). Acta Materialia 52 (2): 475–486. doi:10.1016/j.actamat.2003.09.031. Bibcode: 2004AcMat..52..475Y. https://linkinghub.elsevier.com/retrieve/pii/S1359645403005652.
31. ↑ Zhao, Dong-Liang; Zhang, Yang-Huan (2014-10-01). "Research progress in Mg-based hydrogen storage alloys" (in en). Rare Metals 33 (5): 499–510. doi:10.1007/s12598-014-0398-9. ISSN 1867-7185. Bibcode: 2014RareM..33..499Z.
32. ↑ Cui, N.; He, P.; Luo, J. L. (1999-10-19). "Magnesium-based hydrogen storage materials modified by mechanical alloying" (in en). Acta Materialia 47 (14): 3737–3743. doi:10.1016/S1359-6454(99)00249-9. ISSN 1359-6454. Bibcode: 1999AcMat..47.3737C. https://www.sciencedirect.com/science/article/pii/S1359645499002499.
33. ↑ Bobet, J-L; Akiba, E; Nakamura, Y; Darriet, B (2000-10-01). "Study of Mg-M (M=Co, Ni and Fe) mixture elaborated by reactive mechanical alloying — hydrogen sorption properties" (in en). International Journal of Hydrogen Energy 25 (10): 987–996. doi:10.1016/S0360-3199(00)00002-1. ISSN 0360-3199. Bibcode: 2000IJHE...25..987B. https://www.sciencedirect.com/science/article/pii/S0360319900000021.
34. ↑ Yamaura, Shin-ichi; Kim, Hyang-Yeon; Kimura, Hisamichi; Inoue, Akihisa; Arata, Yoshiaki (2002-12-16). "Electrode properties of rapidly solidified Mg67Ni23Pd10 amorphous alloy" (in en). Journal of Alloys and Compounds 347 (1): 239–243. doi:10.1016/S0925-8388(02)00759-4. ISSN 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838802007594.
35. ↑ Dehouche, Z; Djaozandry, R; Goyette, J; Bose, T. K (1999-06-29). "Evaluation techniques of cycling effect on thermodynamic and crystal structure properties of Mg2Ni alloy" (in en). Journal of Alloys and Compounds 288 (1): 269–276. doi:10.1016/S0925-8388(99)00085-7. ISSN 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838899000857. Retrieved 2021-11-20.
36. ↑ Li, Weiyang; Li, Chunsheng; Ma, Hua; Chen, Jun (2007-05-01). "Magnesium Nanowires: Enhanced Kinetics for Hydrogen Absorption and Desorption". Journal of the American Chemical Society 129 (21): 6710–6711. doi:10.1021/ja071323z. ISSN 0002-7863. PMID 17488082. Bibcode: 2007JAChS.129.6710L.
37. ↑ Nielsen, Thomas K.; Manickam, Kandavel; Hirscher, Michael; Besenbacher, Flemming; Jensen, Torben R. (2009-11-24). "Confinement of MgH2 Nanoclusters within Nanoporous Aerogel Scaffold Materials". ACS Nano 3 (11): 3521–3528. doi:10.1021/nn901072w. ISSN 1936-0851. PMID 19883120. Bibcode: 2009ACSNa...3.3521N.
38. ↑ Zhao-Karger, Zhirong; Hu, Jianjiang; Roth, Arne; Wang, Di; Kübel, Christian; Lohstroh, Wiebke; Fichtner, Maximilian (2010-11-01). "Altered thermodynamic and kinetic properties of MgH2 infiltrated in microporous scaffold" (in en). Chemical Communications 46 (44): 8353–8355. doi:10.1039/C0CC03072D. ISSN 1364-548X. PMID 20890496. https://pubs.rsc.org/en/content/articlelanding/2010/cc/c0cc03072d. Retrieved 2021-11-20.
39. ↑ Du, Jiaqi; Lan, Zhiqiang; Zhang, Hao; Lü, Shaoxia; Liu, Haizhen; Guo, Jin (2019-09-25). "Catalytic enhanced hydrogen storage properties of Mg-based alloy by the addition of reduced graphene oxide supported V2O3 nanocomposite" (in en). Journal of Alloys and Compounds 802: 660–667. doi:10.1016/j.jallcom.2019.06.221. ISSN 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838819323059.
40. ↑ Xu, Cheng; Lin, Huai-Jun; Wang, Yunlei; Zhang, Peng; Meng, Yuying; Zhang, Yao; Liu, Yana; Zhang, Jiguang et al. (2019-04-25). "Catalytic effect of in situ formed nano-Mg2Ni and Mg2Cu on the hydrogen storage properties of Mg-Y hydride composites" (in en). Journal of Alloys and Compounds 782: 242–250. doi:10.1016/j.jallcom.2018.12.223. ISSN 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838818347790.
41. ↑ Zhu, M.; Wang, H.; Ouyang, L. Z.; Zeng, M. Q. (2006-02-01). "Composite structure and hydrogen storage properties in Mg-base alloys" (in en). International Journal of Hydrogen Energy. HTM 2004 31 (2): 251–257. doi:10.1016/j.ijhydene.2005.04.030. ISSN 0360-3199. Bibcode: 2006IJHE...31..251Z. https://www.sciencedirect.com/science/article/pii/S0360319905001357.
42. ↑ Lu, Chong; Zou, Jianxin; Zeng, Xiaoqin; Ding, Wenjiang; Shao, Huaiyu (2019-11-25). "Enhanced hydrogen sorption properties of core-shell like structured Mg@NaBH4/MgB2 composite" (in en). Journal of Alloys and Compounds 810. doi:10.1016/j.jallcom.2019.151763. ISSN 0925-8388. https://www.sciencedirect.com/science/article/pii/S0925838819329962.
43. ↑ 43.0 43.1 Ouyang, Liuzhang; Liu, Fen; Wang, Hui; Liu, Jiangwen; Yang, Xu-Sheng; Sun, Lixian; Zhu, Min (August 2020). "Magnesium-based hydrogen storage compounds: A review" (in en). Journal of Alloys and Compounds 832. doi:10.1016/j.jallcom.2020.154865. https://linkinghub.elsevier.com/retrieve/pii/S0925838820312287. Retrieved 2021-11-20.
44. ↑ Yabe, T.; Bagheri, B.; Ohkubo, T.; Uchida, S.; Yoshida, K.; Funatsu, T.; Oishi, T.; Daito, K. et al. (2008-10-15). "100 W-class solar pumped laser for sustainable magnesium-hydrogen energy cycle" (in en). Journal of Applied Physics 104 (8): 083104–083104–8. doi:10.1063/1.2998981. ISSN 0021-8979. Bibcode: 2008JAP...104h3104Y. http://aip.scitation.org/doi/10.1063/1.2998981. Retrieved 2022-09-06.
45. ↑ Li, Jun-Jiao; Wang, Chong-Chen; Guo, Jie; Cui, Jing-Rui; Wang, Peng; Zhao, Chen (2018-01-08). "Three coordination compounds based on tris(1-imidazolyl)benzene: Hydrothermal synthesis, crystal structure and adsorption performances toward organic dyes" (in en). Polyhedron 139: 89–97. doi:10.1016/j.poly.2017.10.011. ISSN 0277-5387. https://www.sciencedirect.com/science/article/pii/S0277538717306526.
46. ↑ "Scopus preview - Scopus - Welcome to Scopus". https://www.scopus.com/home.uri.
47. ↑ Shao, Huaiyu; Xin, Gongbiao; Zheng, Jie; Li, Xingguo; Akiba, Etsuo (2012-07-01). "Nanotechnology in Mg-based materials for hydrogen storage" (in en). Nano Energy 1 (4): 590–601. doi:10.1016/j.nanoen.2012.05.005. ISSN 2211-2855. Bibcode: 2012NEne....1..590S. https://www.sciencedirect.com/science/article/pii/S2211285512001127. Retrieved 2021-11-20.
48. ↑ Fichtner, Maximilian; Engel, Jens; Fuhr, Olaf; Glöss, Andreas; Rubner, Oliver; Ahlrichs, Reinhart (2003-10-01). "The Structure of Magnesium Alanate". Inorganic Chemistry 42 (22): 7060–7066. doi:10.1021/ic034160y. ISSN 0020-1669. PMID 14577773.
49. ↑ Dilts, J. A.; Ashby, E. C. (June 1972). "Thermal decomposition of complex metal hydrides". Inorganic Chemistry 11 (6): 1230–1236. doi:10.1021/ic50112a015. ISSN 0020-1669.
50. ↑ RESAN, M; HAMPTON, M; LOMNESS, J; SLATTERY, D (October 2005). "Effects of various catalysts on hydrogen release and uptake characteristics of LiAlH". International Journal of Hydrogen Energy 30 (13–14): 1413–1416. doi:10.1016/j.ijhydene.2004.12.009. ISSN 0360-3199.
51. ↑ Ares, J.R.; Aguey-Zinsou, K.-F.; Porcu, M.; Sykes, J.M.; Dornheim, M.; Klassen, T.; Bormann, R. (May 2008). "Thermal and mechanically activated decomposition of LiAlH4". Materials Research Bulletin 43 (5): 1263–1275. doi:10.1016/j.materresbull.2007.05.018. ISSN 0025-5408.
52. ↑ 52.0 52.1 52.2 Milanese, Chiara; Garroni, Sebastiano; Gennari, Fabiana; Marini, Amedeo; Klassen, Thomas; Dornheim, Martin; Pistidda, Claudio (2018-07-24). "Solid State Hydrogen Storage in Alanates and Alanate-Based Compounds: A Review". Metals 8 (8): 567. doi:10.3390/met8080567. ISSN 2075-4701. 50px Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License .
53. ↑ Balema, V.P.; Wiench, J.W.; Dennis, K.W.; Pruski, M.; Pecharsky, V.K. (November 2001). "Titanium catalyzed solid-state transformations in LiAlH4 during high-energy ball-milling". Journal of Alloys and Compounds 329 (1–2): 108–114. doi:10.1016/s0925-8388(01)01570-5. ISSN 0925-8388.
54. ↑ Ismail, M.; Zhao, Y.; Yu, X.B.; Ranjbar, A.; Dou, S.X. (March 2011). "Improved hydrogen desorption in lithium alanate by addition of SWCNT–metallic catalyst composite". International Journal of Hydrogen Energy 36 (5): 3593–3599. doi:10.1016/j.ijhydene.2010.12.050. ISSN 0360-3199. Bibcode: 2011IJHE...36.3593I.
55. ↑ Li, Li; Qiu, Fangyuan; Wang, Yijing; Xu, Yanan; An, Cuihua; Liu, Guang; Jiao, Lifang; Yuan, Huatang (March 2013). "Enhanced hydrogen storage properties of TiN–LiAlH4 composite". International Journal of Hydrogen Energy 38 (9): 3695–3701. doi:10.1016/j.ijhydene.2013.01.088. ISSN 0360-3199.
56. ↑ Li, Zhibao; Liu, Shusheng; Si, Xiaoliang; Zhang, Jian; Jiao, Chengli; Wang, Shuang; Liu, Shuang; Zou, Yong-Jin et al. (February 2012). "Significantly improved dehydrogenation of LiAlH4 destabilized by K2TiF6". International Journal of Hydrogen Energy 37 (4): 3261–3267. doi:10.1016/j.ijhydene.2011.10.038. ISSN 0360-3199.
57. ↑ Tan, Chia-Yen; Tsai, Wen-Ta (August 2015). "Catalytic and inhibitive effects of Pd and Pt decorated MWCNTs on the dehydrogenation behavior of LiAlH4". International Journal of Hydrogen Energy 40 (32): 10185–10193. doi:10.1016/j.ijhydene.2015.06.106. ISSN 0360-3199.
58. ↑ Ashby, E. C.; Kobetz, P. (September 1966). "The Direct Synthesis of Na3AlH6". Inorganic Chemistry 5 (9): 1615–1617. doi:10.1021/ic50043a034. ISSN 0020-1669.
59. ↑ Morioka, Hiroyuki; Kakizaki, Kenichi; Chung, Sai-Cheong; Yamada, Atsuo (April 2003). "Reversible hydrogen decomposition of KAlH4". Journal of Alloys and Compounds 353 (1–2): 310–314. doi:10.1016/s0925-8388(02)01307-5. ISSN 0925-8388. Bibcode: 2003JAllC.353..310M.
60. ↑ Ares, Jose R.; Aguey-Zinsou, Kondo-Francois; Leardini, Fabrice; Ferrer, Isabel Jímenez; Fernandez, Jose-Francisco; Guo, Zheng-Xiao; Sánchez, Carlos (2009-03-26). "Hydrogen Absorption/Desorption Mechanism in Potassium Alanate (KAlH4) and Enhancement by TiCl3 Doping". The Journal of Physical Chemistry C 113 (16): 6845–6851. doi:10.1021/jp807184v. ISSN 1932-7447.
61. ↑ Müller, Benjamin (2011). "Energiespeicherung mittels Methan und energietragenden Stoffen - ein thermodynamischer Vergleich" (in de). Chemie Ingenieur Technik 83 (11): 2002–2013. doi:10.1002/cite.201100113.
62. ↑ 62.0 62.1 62.2 62.3 62.4 He, Teng; Pei, Qijun; Chen, Ping (2015-09-01). "Liquid organic hydrogen carriers". Journal of Energy Chemistry 24 (5): 587–594. doi:10.1016/j.jechem.2015.08.007. Bibcode: 2015JEnCh..24..587H. https://zenodo.org/record/895538. Retrieved 2019-11-29.
63. ↑ Teichmann, Daniel; Arlt, Wolfgang; Wasserscheid, Peter; Freymann, Raymond (2011). "A future energy supply based on Liquid Organic Hydrogen Carriers (LOHC)". Energy & Environmental Science 4 (8): 2767–2773. doi:10.1039/C1EE01454D. Bibcode: 2011EnEnS...4.2767T.
64. ↑ "Hydrogen storage by reversible hydrogenation of pi-conjugated substrates" US patent 7351395
65. ↑ Brückner, Nicole (2013). "Evaluation of Industrially Applied Heat-Transfer Fluids as Liquid Organic Hydrogen Carrier Systems". ChemSusChem 7 (1): 229–235. doi:10.1002/cssc.201300426. PMID 23956191.
66. ↑ Grasemann, Martin; Laurenczy, Gábor (2012-07-18). "Formic acid as a hydrogen source – recent developments and future trends". Energy & Environmental Science 5 (8): 8171–8181. doi:10.1039/C2EE21928J. Bibcode: 2012EnEnS...5.8171G. https://infoscience.epfl.ch/record/180528.
67. ↑ Wang, Bo; Goodman, D. Wayne; Froment, Gilbert F. (2008-01-25). "Kinetic modeling of pure hydrogen production from decalin". Journal of Catalysis 253 (2): 229–238. doi:10.1016/j.jcat.2007.11.012.
68. ↑ Kariya, Nobuko; Fukuoka, Atsushi; Ichikawa, Masaru (2002-07-10). "Efficient evolution of hydrogen from liquid cycloalkanes over Pt-containing catalysts supported on active carbons under "wet–dry multiphase conditions"". Applied Catalysis A: General 233 (1–2): 91–102. doi:10.1016/S0926-860X(02)00139-4. Bibcode: 2002AppCA.233...91K.
69. ↑ Yolcular, Sevim; Olgun, Özden (2008-11-01). "Ni/Al2O3 catalysts and their activity in dehydrogenation of methylcyclohexane for hydrogen production". Catalysis Today. Selected papers from the EUROPACAT VIII Hydrogen Society Session, Turku, Finland, 26–31 August 2007 138 (3–4): 198–202. doi:10.1016/j.cattod.2008.07.020. Bibcode: 2008CatT..138..198Y.
70. ↑ Clot, Eric; Eisenstein, Odile; Crabtree, Robert H. (2007-05-30). "Computational structure–activity relationships in H2 storage: how placement of N atoms affects release temperatures in organic liquid storage materials". Chemical Communications 22 (22): 2231–2233. doi:10.1039/B705037B. PMID 17534500. Bibcode: 2007ChCom..22.2231C.
71. ↑ Eblagon, Katarzyna Morawa; Tam, Kin; Tsang, Shik Chi Edman (2012). "Comparison of catalytic performance of supported ruthenium and rhodium for hydrogenation of 9-ethylcarbazole for hydrogen storage applications". Energy & Environmental Science 5 (9): 8621. doi:10.1039/C2EE22066K. Bibcode: 2012EnEnS...5.8621E.
72. ↑ Stracke, Marcelo P.; Ebeling, Günter; Cataluña, Renato; Dupont, Jairton (2007). "Hydrogen-Storage Materials Based on Imidazolium Ionic Liquids". Energy & Fuels 21 (3): 1695–1698. doi:10.1021/ef060481t. Bibcode: 2007EnFue..21.1695S.
73. ↑ Fellay, C; Dyson, PJ; Laurenczy, G (2008). "A Viable Hydrogen-Storage System Based On Selective Formic Acid Decomposition with a Ruthenium Catalyst". Angewandte Chemie International Edition in English 47 (21): 3966–8. doi:10.1002/anie.200800320. PMID 18393267. Bibcode: 2008ACIE...47.3966F. https://infoscience.epfl.ch/record/124832.
74. ↑ F. Joó (2008). "Breakthroughs in Hydrogen Storage – Formic Acid as a Sustainable Storage Material for Hydrogen". ChemSusChem 1 (10): 805–8. doi:10.1002/cssc.200800133. PMID 18781551. Bibcode: 2008ChSCh...1..805J.
75. ↑ P. G. Jessop, in Handbook of Homogeneous Hydrogenation (Eds.: J. G. de Vries, C. J. Elsevier), Wiley-VCH, Weinheim, Germany, 2007, pp. 489–511.
76. ↑ P. G. Jessop; F. Joó; C.-C. Tai (2004). "Recent advances in the homogeneous hydrogenation of carbon dioxide". Coordination Chemistry Reviews 248 (21–24): 2425. doi:10.1016/j.ccr.2004.05.019. Bibcode: 2004CooCR.248.2425J.
77. ↑ AVERY, W (1988). "A role for ammonia in the hydrogen economy". International Journal of Hydrogen Energy 13 (12): 761–773. doi:10.1016/0360-3199(88)90037-7. ISSN 0360-3199. Bibcode: 1988IJHE...13..761A.
78. ↑ The ammonia economy . Memagazine.org (2003-07-10)
79. ↑ Lamb, Krystina E.; Dolan, Michael D.; Kennedy, Danielle F. (2019-02-05). "Ammonia for hydrogen storage; A review of catalytic ammonia decomposition and hydrogen separation and purification" (in en). International Journal of Hydrogen Energy 44 (7): 3580–3593. doi:10.1016/j.ijhydene.2018.12.024. ISSN 0360-3199. Bibcode: 2019IJHE...44.3580L. http://www.sciencedirect.com/science/article/pii/S0360319918339272.
80. ↑ Bligaard, T.; Nørskov, J. K.; Dahl, S.; Matthiesen, J.; Christensen, C. H.; Sehested, J. (2004-05-15). "The Brønsted–Evans–Polanyi relation and the volcano curve in heterogeneous catalysis" (in en). Journal of Catalysis 224 (1): 206–217. doi:10.1016/j.jcat.2004.02.034. ISSN 0021-9517. http://www.sciencedirect.com/science/article/pii/S0021951704001010. Retrieved 2020-11-18.
81. ↑ Dolan, Michael D.; Viano, David M.; Langley, Matthew J.; Lamb, Krystina E. (2018-03-01). "Tubular vanadium membranes for hydrogen purification" (in en). Journal of Membrane Science 549: 306–311. doi:10.1016/j.memsci.2017.12.031. ISSN 0376-7388. http://www.sciencedirect.com/science/article/pii/S037673881733185X.
82. ↑ Park, Soo-Jin; Kim, Byung-Joo (2005-11-15). "Ammonia removal of activated carbon fibers produced by oxyfluorination" (in en). Journal of Colloid and Interface Science 291 (2): 597–599. doi:10.1016/j.jcis.2005.05.012. ISSN 0021-9797. PMID 15975585. Bibcode: 2005JCIS..291..597P. http://www.sciencedirect.com/science/article/pii/S0021979705005291.
83. ↑ Focus Denmark . Netpublikationer.dk (2006-06-13)
84. ↑ "Liquid asset". The Engineer. 2008-01-15. http://www.theengineer.co.uk/Articles/303939/Liquid+asset.htm.
85. ↑ Zong, J., J. T. Mague, and R. A. Pascal, Jr., Exceptional Steric Congestion in an in,in-Bis(hydrosilane), J. Am. Chem. Soc. 2013, 135, 13235-13237.
86. ↑ Echeverría, Jorge; Aullón, Gabriel; Alvarez, Santiago (2017). "Intermolecular interactions in group 14 hydrides: Beyond C-H··· H-C contacts". International Journal of Quantum Chemistry 117 (21). doi:10.1002/qua.25432.
87. ↑ Compendium of Hydrogen Energy.Volume 2:hydrogen Storage, Transportation and Infrastructure. A volume in Woodhead Publishing Series in Energy 2016, Chapter 8 – Other methods for the physical storage of hydrogen doi:10.1016/B978-1-78242-362-1.00008-0
88. ↑ Bjørnæs, Christian. "Global warming potential of hydrogen estimated", Centre for International Climate and Environmental Research, June 7, 2023. Retrieved June 15, 2023.
89. ↑ Sand, Maria; Skeie, Ragnhild Bieltvedt; Sandstad, Marit; Krishnan, Srinath; Myhre, Gunnar; Bryant, Hannah; Derwent, Richard; Hauglustaine, Didier et al. (2023). "A multi-model assessment of the Global Warming Potential of hydrogen". Communications Earth & Environment 4 (1): 203. doi:10.1038/s43247-023-00857-8. Bibcode: 2023ComEE...4..203S.
90. ↑ 90.0 90.1 Dong, Jinxiang; Wang, Xiaoyan; Xu, Hong; Zhao, Qiang; Li, Jinping (2007-12-01). "Hydrogen storage in several microporous zeolites" (in en). International Journal of Hydrogen Energy 32 (18): 4998–5004. doi:10.1016/j.ijhydene.2007.08.009. ISSN 0360-3199. Bibcode: 2007IJHE...32.4998D. https://www.sciencedirect.com/science/article/pii/S0360319907004843.
91. ↑ Ren, Jianwei; Musyoka, Nicholas M.; Langmi, Henrietta W.; Mathe, Mkhulu; Liao, Shijun (2017-01-05). "Current research trends and perspectives on materials-based hydrogen storage solutions: A critical review" (in en). International Journal of Hydrogen Energy 42 (1): 289–311. doi:10.1016/j.ijhydene.2016.11.195. ISSN 0360-3199. Bibcode: 2017IJHE...42..289R. https://www.sciencedirect.com/science/article/pii/S0360319916335285.
92. ↑ Li, Yingwei; Yang, Ralph T. (2006-08-01). "Hydrogen Storage in Low Silica Type X Zeolites" (in en). The Journal of Physical Chemistry B 110 (34): 17175–17181. doi:10.1021/jp0634508. ISSN 1520-6106. PMID 16928014. Bibcode: 2006JPCB..11017175L. https://pubs.acs.org/doi/10.1021/jp0634508.
93. ↑ Sevilla, Marta; Mokaya, Robert (2014-03-21). "Energy storage applications of activated carbons: supercapacitors and hydrogen storage" (in en). Energy Environ. Sci. 7 (4): 1250–1280. doi:10.1039/c3ee43525c. ISSN 1754-5706. Bibcode: 2014EnEnS...7.1250S.
94. ↑ Blankenship II, Troy Scott; Balahmar, Norah; Mokaya, Robert (2017-11-16). "Oxygen-rich microporous carbons with exceptional hydrogen storage capacity" (in En). Nature Communications 8 (1): 1545. doi:10.1038/s41467-017-01633-x. ISSN 2041-1723. PMID 29146978. Bibcode: 2017NatCo...8.1545B.
95. ↑ Blankenship, Troy Scott; Mokaya, Robert (2017-12-06). "Cigarette butt-derived carbons have ultra-high surface area and unprecedented hydrogen storage capacity" (in en). Energy & Environmental Science 10 (12): 2552–2562. doi:10.1039/c7ee02616a. ISSN 1754-5706. Bibcode: 2017EnEnS..10.2552B. http://eprints.nottingham.ac.uk/47622/1/RMokaya Cigarette butt-derived carbons.pdf. Retrieved 2019-06-27.
96. ↑ Graphene as suitable hydrogen storage substance . Physicsworld.com
97. ↑ Graphene to graphane . Rsc.org. January 2009
98. ↑ 98.0 98.1 98.2 Shet, Sachin P.; Shanmuga Priya, S.; Sudhakar, K.; Tahir, Muhammad (March 2021). "A review on current trends in potential use of metal-organic framework for hydrogen storage". International Journal of Hydrogen Energy 46 (21): 11782–11803. doi:10.1016/j.ijhydene.2021.01.020. ISSN 0360-3199. Bibcode: 2021IJHE...4611782S.
99. ↑ Xia, Liangzhi; Liu, Qing (January 2017). "Adsorption of H2 on aluminum-based metal-organic frameworks: A computational study". Computational Materials Science 126: 176–181. doi:10.1016/j.commatsci.2016.09.039. ISSN 0927-0256.
100. ↑ Ahmed, Alauddin; Seth, Saona; Purewal, Justin; Wong-Foy, Antek G.; Veenstra, Mike; Matzger, Adam J.; Siegel, Donald J. (2019-04-05). "Exceptional hydrogen storage achieved by screening nearly half a million metal-organic frameworks". Nature Communications 10 (1): 1568. doi:10.1038/s41467-019-09365-w. ISSN 2041-1723. PMID 30952862. Bibcode: 2019NatCo..10.1568A.
101. ↑ Liu, Jia; Zou, Ruqiang; Zhao, Yanli (November 2016). "Recent developments in porous materials for H2 and CH4 storage". Tetrahedron Letters 57 (44): 4873–4881. doi:10.1016/j.tetlet.2016.09.085. ISSN 0040-4039.
102. ↑ Rochat, Sébastien; Polak-Kraśna, Katarzyna; Tian, Mi; Holyfield, Leighton T.; Mays, Timothy J.; Bowen, Christopher R.; Burrows, Andrew D. (2017). "Hydrogen storage in polymer-based processable microporous composites". Journal of Materials Chemistry A 5 (35): 18752–18761. doi:10.1039/c7ta05232d. ISSN 2050-7488.
103. ↑ MOF-74 – A Potential Hydrogen-Storage Compound . Nist.gov
104. ↑ Researchers Demonstrate 7.5 wt% Hydrogen Storage in MOFs . Green Car Congress (2006-03-06)
105. ↑ New MOF Material With hydrogen Uptake Of Up To 10 wt% . 22 February 2009
106. ↑ "Climate change: 'Bath sponge' breakthrough could boost cleaner cars". 18 April 2020. https://www.bbc.co.uk/news/science-environment-52328786.
107. ↑ Zhijie Chen (2020). "Balancing volumetric and gravimetric uptake in highly porous materials for clean energy". Science 368 (6488): 297–303. doi:10.1126/science.aaz8881. PMID 32299950. Bibcode: 2020Sci...368..297C. https://www.science.org/doi/10.1126/science.aaz8881. Retrieved 19 April 2020.
108. ↑ R. K. Ahluwalia, T. Q. Hua, J. K. Peng and R. Kumar System Level Analysis of Hydrogen Storage Options . 2010 DOE Hydrogen Program Review, Washington, DC, June 8–11, 2010
109. ↑ Stephen Lasher Analyses of Hydrogen Storage Materials and On-Board Systems . DOE Annual Merit Review June 7–11, 2010
110. ↑ S&TR | Setting a World Driving Record with Hydrogen . Llnl.gov (2007-06-12)
111. ↑ Compact (L)H2 Storage with Extended Dormancy in Cryogenic Pressure Vessels . Lawrence Livermore National Laboratory June 8, 2010
112. ↑ Technical Sessions . FISITA 2010
113. ↑ Hassanpouryouzband, Aliakbar; Joonaki, Edris; Vasheghani Farahani, Mehrdad; Takeya, Satoshi; Ruppel, Carolyn; Yang, Jinhai; J. English, Niall; M. Schicks, Judith et al. (2020). "Gas hydrates in sustainable chemistry". Chemical Society Reviews 49 (15): 5225–5309. doi:10.1039/C8CS00989A. PMID 32567615. Bibcode: 2020CSRev..49.5225H.
114. ↑ Florusse, L. J.; Peters, CJ; Schoonman, J; Hester, KC; Koh, CA; Dec, SF; Marsh, KN; Sloan, ED (2004). "Stable Low-Pressure Hydrogen Clusters Stored in a Binary Clathrate Hydrate". Science 306 (5695): 469–71. doi:10.1126/science.1102076. PMID 15486295. Bibcode: 2004Sci...306..469F.
115. ↑ Zhevago, N.K.; Glebov, V.I. (2007). "Hydrogen storage in capillary arrays". Energy Conversion and Management 48 (5): 1554–1559. doi:10.1016/j.enconman.2006.11.017. Bibcode: 2007ECM....48.1554Z.
116. ↑ Zhevago, N.K.; Denisov, E.I.; Glebov, V.I. (2010). "Experimental investigation of hydrogen storage in capillary arrays". International Journal of Hydrogen Energy 35 (1): 169–175. doi:10.1016/j.ijhydene.2009.10.011. Bibcode: 2010IJHE...35..169Z.
117. ↑ Dan Eliezer et al. A New Technology for Hydrogen Storage in Capillary Arrays. C.En & BAM
118. ↑ Zhevago, N. K.; Chabak, A. F.; Denisov, E. I.; Glebov, V. I.; Korobtsev, S. V. (2013). "Storage of cryo-compressed hydrogen in flexible glass capillaries". International Journal of Hydrogen Energy 38 (16): 6694–6703. doi:10.1016/j.ijhydene.2013.03.107. Bibcode: 2013IJHE...38.6694Z.
119. ↑ 119.0 119.1 Dalai, Sridhar; Savithri, Vijayalakshmi (26 October 2017). "Investigating the effect of cobalt loading on thermal conductivity and hydrogen storage capacity of hollow glass microspheres (HGMs)". MaterialsToday: Proceedings 4 (11): 11608–11616. doi:10.1016/j.matpr.2017.09.072. https://www.sciencedirect.com/science/article/pii/S2214785317318059. Retrieved 16 November 2020.
120. ↑ Qi, Xiaobo; Gao, Cong; Zhang, Zhanwen; Chen, Sufen; Li, Bo; Wei, Sheng (January 2012). "Production and characterization of hollow glass microspheres with high diffusivity for hydrogen storage". International Journal of Hydrogen Energy 37 (2): 1518–1530. doi:10.1016/j.ijhydene.2011.10.034. Bibcode: 2012IJHE...37.1518Q. https://www.sciencedirect.com/science/article/pii/S0360319911023937. Retrieved 16 November 2020.
121. ↑ Rapp, Douglas; Shelby, James (1 December 2004). "Photo-induced hydrogen outgassing of glass". Journal of Non-Crystalline Solids 349: 254–259. doi:10.1016/j.jnoncrysol.2004.08.151. Bibcode: 2004JNCS..349..254R. https://www.sciencedirect.com/science/article/pii/S0022309304007549. Retrieved 16 November 2020.
122. ↑ Zarezadeh Mehrizi, Majid; Abdi, Jafar; Rezakazemi, Mashallah; Salehi, Ehsan (10 July 2020). "A review on recent advances in hollow spheres for hydrogen storage". International Journal of Hydrogen Energy 45 (35): 17583–17604. doi:10.1016/j.ijhydene.2020.04.201. Bibcode: 2020IJHE...4517583Z. https://www.sciencedirect.com/science/article/pii/S0360319920316104. Retrieved 16 November 2020.
123. ↑ "R&D of large stationary hydrogen/CNG/HCNG storage vessels". http://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/ihfpv_zheng2.pdf.
124. ↑ 124.0 124.1 "COMMISSION STAFF WORKING DOCUMENT: Energy storage – the role of electricity". European Commission. 1 Feb 2017. https://ec.europa.eu/energy/sites/ener/files/documents/swd2017_61_document_travail_service_part1_v6.pdf.
125. ↑ Hassanpouryouzband, Aliakbar; Joonaki, Edris; Edlmann, Katriona; Haszeldine, R. Stuart (2021). "Offshore Geological Storage of Hydrogen: Is This Our Best Option to Achieve Net-Zero?". ACS Energy Lett. 6 (6): 2181–2186. doi:10.1021/acsenergylett.1c00845. Bibcode: 2021ACSEL...6.2181H. https://www.research.ed.ac.uk/en/publications/4de280c0-20f2-40be-bdeb-31ef68929826. Retrieved 2022-06-27.
126. ↑ 1994 – ECN abstract . Hyweb.de
127. ↑ "European Renewable Energy Network Study". Brussels: European Union. January 2012. pp. 86, 188. http://www.europarl.europa.eu/document/activities/cont/201202/20120208ATT37544/20120208ATT37544EN.pdf.
128. ↑ "Why storing large scale intermittent renewable energies with hydrogen?". http://www.hyunder.eu/.
129. ↑ "Storing renewable energy: Is hydrogen a viable solution?". http://www.hyunder.eu/images/Presentations EUSEW/2 HyUnder EUSEW workshop Luis Correas.pdf.
130. ↑ "Bringing North Sea Energy Ashore Efficiently". World Energy Council Netherlands. https://www.worldenergy.org/wp-content/uploads/2018/01/WEC-brochure_Online-offshore.pdf.
131. ↑ Gerdes, Justin (2018-04-10). "Enlisting Abandoned Oil and Gas Wells as 'Electron Reserves'". https://www.greentechmedia.com/articles/read/enlisting-abandoned-oil-and-gas-wells-as-electron-reserves#gs.ByNEEjY.
132. ↑ 1979 - Underground hydrogen storage. Final report.
133. ↑ hydrogen storage cavern system
134. ↑ Hassanpouryouzband, Aliakbar; Joonaki, Edris; Edlmann, Katriona; Haszeldine, R. Stuart (2021). "Offshore Geological Storage of Hydrogen: Is This Our Best Option to Achieve Net-Zero?". ACS Energy Lett. 6 (6): 2181–2186. doi:10.1021/acsenergylett.1c00845. Bibcode: 2021ACSEL...6.2181H.
135. ↑ Energy storage 2012
136. ↑ 1994 - ECN abstract
137. ↑ "2006-Underground hydrogen storage in geological formations". http://energy.ruc.dk/HstoreMerida07.pdf.
138. ↑ Brookhaven National Lab -Final report
139. ↑ Large-scale hydrogen underground storage for securing future energy supplies
140. ↑ LINDBLOM U.E.; A conceptual design for compressed hydrogen storage in mined caverns
141. ↑ Energy technology analysis: Prospects for Hydrogen and Fuel Cells (International Energy Agency 2005) p.70
142. ↑ ORNL-Pag.20
143. ↑ Tarkowski, Radoslaw (2019-05-01). "Underground hydrogen storage: Characteristics and prospects". Renewable and Sustainable Energy Reviews 105: 86–94. doi:10.1016/j.rser.2019.01.051. ISSN 1364-0321. Bibcode: 2019RSERv.105...86T. https://www.sciencedirect.com/science/article/pii/S1364032119300528.
144. ↑ 144.0 144.1 Thiyagarajan, Sugan Raj; Emadi, Hossein; Hussain, Athar; Patange, Prathamesh; Watson, Marshall (2022-07-01). "A comprehensive review of the mechanisms and efficiency of underground hydrogen storage". Journal of Energy Storage 51. doi:10.1016/j.est.2022.104490. ISSN 2352-152X. Bibcode: 2022JEnSt..5104490T. https://www.sciencedirect.com/science/article/pii/S2352152X22005114.
145. ↑ 145.0 145.1 Małachowska, Aleksandra; Łukasik, Natalia; Mioduska, Joanna; Gębicki, Jacek (January 2022). "Hydrogen Storage in Geological Formations—The Potential of Salt Caverns" (in en). Energies 15 (14): 5038. doi:10.3390/en15145038. ISSN 1996-1073. Bibcode: 2022Energ..15.5038M.
146. ↑ Grgic, D.; Al Sahyouni, F.; Golfier, F.; Moumni, M.; Schoumacker, L. (2022-02-01). "Evolution of Gas Permeability of Rock Salt Under Different Loading Conditions and Implications on the Underground Hydrogen Storage in Salt Caverns" (in en). Rock Mechanics and Rock Engineering 55 (2): 691–714. doi:10.1007/s00603-021-02681-y. ISSN 1434-453X. Bibcode: 2022RMRE...55..691G.
147. ↑ 147.0 147.1 Lankof, Leszek; Tarkowski, Radosław (2020-07-31). "Assessment of the potential for underground hydrogen storage in bedded salt formation". International Journal of Hydrogen Energy 45 (38): 19479–19492. doi:10.1016/j.ijhydene.2020.05.024. ISSN 0360-3199. Bibcode: 2020IJHE...4519479L. https://www.sciencedirect.com/science/article/pii/S0360319920317523.
148. ↑ Panfilov, Mikhail (December 2010). "Underground Storage of Hydrogen: In Situ Self-Organisation and Methane Generation" (in en). Transport in Porous Media 85 (3): 841–865. doi:10.1007/s11242-010-9595-7. ISSN 0169-3913. Bibcode: 2010TPMed..85..841P. https://link.springer.com/10.1007/s11242-010-9595-7.
149. ↑ a life-cycle cost analysis framework for geologic storage of hydrogen
150. ↑ Hyunder
151. ↑ Storing renewable energy: Is hydrogen a viable solution?
152. ↑ The role of hydrogen storage in a clean responsive power system
153. ↑ "Underground Sun Storage - Publikationen - Presse/Publikationen". https://www.underground-sun-storage.at/pressepublikationen/publikationen.html.
154. ↑ Hornyak, Tim (1 November 2020). "An $11 trillion global hydrogen energy boom is coming. Here's what could trigger it" (in en). https://www.cnbc.com/2020/11/01/how-salt-caverns-may-trigger-11-trillion-hydrogen-energy-boom-.html.
155. ↑ Cyran, Katarzyna (June 2020). "Insight into a Shape of Salt Storage Caverns". Archives of Mining Sciences (AGH University of Science and Technology in Kraków) 65(2):363-398: 384. doi:10.24425/ams.2020.133198.
156. ↑ Rathi, Akshat (11 December 2017). "Batteries can't solve the world's biggest energy-storage problem. One startup has a solution.". Quartz. https://qz.com/1133123/batteries-cant-solve-the-worlds-biggest-energy-storage-problem-one-startup-has-a-solution/.
157. ↑ "Munich-based clean-tech startup Electrochaea and Hungarian utility MVM establish power-to-gas joint venture". MVM. MVM Group. 24 October 2016. http://mvm.hu/uncategorized/munich-based-clean-tech-startup-electrochaea-hungarian-utility-mvm-establish-power-gas-joint-venture/?lang=en.
158. ↑ "SoCalGas and Opus 12 Successfully Demonstrate Technology That Simplifies Conversion of Carbon Dioxide into Storable Renewable Energy". prnewswire.com (Press release). prnewswire. Archived from the original on 23 April 2018. Retrieved 22 April 2018.
159. ↑ Ambrose, Jillian (2018-01-06). "Energy networks prepare to blend hydrogen into the gas grid for the first time". The Telegraph. https://www.telegraph.co.uk/business/2018/01/06/hydrogen/.
160. ↑ Anscombe, Nadya (4 June 2012). "Energy storage: Could hydrogen be the answer?". Solar Novus Today. http://www.solarnovus.com/energy-storage-could-hydrogen-be-the-answer_N5028.html.
161. ↑ "naturalhy.net". http://www.naturalhy.net/docs/Naturalhy_Brochure.pdf.
162. ↑ Mike Millikin (2014-11-18). "Toyota FCV Mirai launches in LA; initial TFCS specs; $57,500 or $499 lease; leaning on Prius analogy". Green Car Congress. http://www.greencarcongress.com/2014/11/20141118-mirai.html.
163. ↑ 163.0 163.1 Hussein, A.K. (2015). "Applications of nanotechnology in renewable energies—A comprehensive overview and understanding". Renewable and Sustainable Energy Reviews 42: 460–476. doi:10.1016/j.rser.2014.10.027. Bibcode: 2015RSERv..42..460H.
164. ↑ Evans, Scarlett (August 20, 2018). "Researchers to create hydrogen energy source using nanotechnology". United Kingdom. https://www.power-technology.com/news/researchers-create-hydrogen-energy-source-using-nanotechnology/.
165. ↑ Zubrin, Robert (2007). Energy Victory. Amherst, New York: Prometheus Books. pp. 117–118. ISBN 978-1-59102-591-7. https://archive.org/details/energyvictorywin00zubr. "The situation is much worse than this, however, because before the hydrogen can be transported anywhere, it needs to be either compressed or liquefied. To liquefy it, it must be refrigerated down to a temperature of −253 °C (20 degrees above absolute zero). At these temperatures, fundamental laws of thermodynamics make refrigerators extremely inefficient. As a result, about 40 percent of the energy in the hydrogen must be spent to liquefy it. This reduces the actual net energy content of our product fuel to 792 kcal. In addition, because it is a cryogenic liquid, still more energy could be expected to be lost as the hydrogen boils away as it is warmed by heat leaking in from the outside environment during transport and storage."
166. ↑ Savvides, Nick (2017-01-11). "Japan plans to use imported liquefied hydrogen to fuel Tokyo 2020 Olympics". IHS Markit Maritime Portal. https://fairplay.ihs.com/ship-construction/article/4280251/japan-plans-to-use-imported-liquefied-hydrogen-to-fuel-tokyo-2020-olympics.
167. ↑ S.Sadaghiani, Mirhadi (2 March 2017). "Introducing and energy analysis of a novel cryogenic hydrogen liquefaction process configuration". International Journal of Hydrogen Energy 42 (9): 6033. doi:10.1016/j.ijhydene.2017.01.136. Bibcode: 2017IJHE...42.6033S.
168. ↑ Chanchetti, Lucas Faccioni (2014-09-18). "Cientometria aplicada a materiais para armazenamento de hidrogênio". https://repositorio.ufscar.br/handle/ufscar/935.
169. ↑ 169.0 169.1 Chanchetti, Lucas Faccioni; Leiva, Daniel Rodrigo; Lopes de Faria, Leandro Innocentini; Ishikawa, Tomaz Toshimi (2020-02-14). "A scientometric review of research in hydrogen storage materials" (in en). International Journal of Hydrogen Energy. 22nd World Hydrogen Energy Conference 45 (8): 5356–5366. doi:10.1016/j.ijhydene.2019.06.093. ISSN 0360-3199. Bibcode: 2020IJHE...45.5356C. https://www.sciencedirect.com/science/article/pii/S0360319919323432.
170. ↑ Jain, Ankur; Ichikawa, Takayuki; Ichikawa, Takayuki; Agarwal, Shivani (2018). "Nitrogen-Based Hydrogen Storage Systems: A Detailed Overview". Hydrogen Storage Technologies. Hoboken, NJ, USA: John Wiley & Sons, Inc.. pp. 39–88. doi:10.1002/9781119460572.ch2. ISBN 978-1-119-46057-2.
171. ↑ Worth, John D.; Ting, Valeska P.; Faul, Charl F. J. (28 July 2025). "Exploring conjugated microporous polymers for hydrogen storage: A review of current advances". International Journal of Hydrogen Energy 152: 149718. doi:10.1016/j.ijhydene.2025.05.348. ISSN 0360-3199. https://www.sciencedirect.com/science/article/pii/S0360319925026564.
172. ↑ Teichmann, Daniel; Arlt, Wolfgang; Wasserscheid, Peter; Freymann, Raymond (2011). "A future energy supply based on Liquid Organic Hydrogen Carriers (LOHC)". Energy & Environmental Science 4 (8): 2767. doi:10.1039/c1ee01454d. ISSN 1754-5692. Bibcode: 2011EnEnS...4.2767T.

## External links

* Hydrogen Supply Availability with Cavern Storage
* Large Hydrogen Underground Storage
* Wasserstoff-Speicherung in Salzkavernen zur Glättung des Windstromangebots (German)
* 1993-Energy and hydrogen Pag.48
* 2009-SNL-Geologic Storage of Hydrogen
* Hydrogen stored in salt caverns could be converted into flexible power source archive
* [1]

| Wikimedia Commons has media related to Hydrogen storage.

|

* MaHyTec Hydrogen Tanks
* Nesshy[Usurped!]
* Hydrogen as the fuel of the future, report by the DLR; discusses the types of hydrogen storage
* Ammonia Borane (NhxBHx)
* Hyweb (1996)
* Research into metal–organic framework or Nano Cages [2] H2 Storage Projects
* Hydrogen Storage Technical Data

* v
* t
* e

Environmental technology

* Appropriate technology
* Clean technology
* Environmental design
* Environmental impact assessment
* Sustainable development
* Sustainable technology

Pollution|

* Air pollution (control
* dispersion modeling)
* Industrial ecology
* Solid waste treatment
* Waste management
* Water (agricultural wastewater treatment
* industrial wastewater treatment
* sewage treatment
* waste-water treatment technologies
* water purification)

Renewable energy|

* Alternative energy
* Efficient energy use
* Energy development
* Energy recovery
* Fuel (alternative fuel
* biofuel
* carbon negative fuel
* hydrogen technologies)
* List of energy storage projects
* Renewable energy (commercialization)
* Sustainable energy
* Transportation (electric vehicle
* hybrid vehicle)

Conservation|

* Birth control
* Building (green
* natural
* sustainable architecture
* New Urbanism
* New Classical)
* Conservation biology
* Conservation ethic
* Ecoforestry
* Environmental preservation
* Environmental remediation
* Green computing
* Permaculture
* Recycling

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Hydrogen storage. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Hydrogen_storage&oldid=4370060"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template