Raman scattering

Short description: Inelastic scattering of photons by matter

Template:Scattering

In chemistry and physics, Raman scattering or the Raman effect (/ˈrɑːmən/) is the inelastic scattering of photons by matter, meaning that there is both an exchange of energy and a change in the light's direction. Typically this effect involves vibrational energy being gained by a molecule as incident photons from a visible laser are shifted to lower energy. This is called normal Stokes-Raman scattering.

Light has a certain probability of being scattered by a material. When photons are scattered, most of them are elastically scattered (Rayleigh scattering), such that the scattered photons have the same energy (frequency, wavelength, and therefore color) as the incident photons, but different direction. Rayleigh scattering usually has an intensity in the range 0.1% to 0.01% relative to that of a radiation source. An even smaller fraction of the scattered photons (about 1 in a million) can be scattered inelastically, with the scattered photons having an energy different (usually lower) from those of the incident photons—these are Raman scattered photons.[1] Because of conservation of energy, the material either gains or loses energy in the process.

The effect is exploited by chemists and physicists to gain information about materials for a variety of purposes by performing various forms of Raman spectroscopy. Many other variants of Raman spectroscopy allow rotational energy to be examined, if gas samples are used, and electronic energy levels may be examined if an X-ray source is used, in addition to other possibilities. More complex techniques involving pulsed lasers, multiple laser beams and so on are known.

The Raman effect is named after Indian scientist C. V. Raman, who discovered it in 1928 with assistance from his student K. S. Krishnan. Raman was awarded the 1930 Nobel Prize in Physics for his discovery of Raman scattering.

## Contents

* 1 History
* 2 Instrumentation
* 3 Theory
* 3.1 Molecular vibrations
* 3.1.1 Degrees of freedom
* 3.1.2 Vibrational energy
* 3.2 Raman scattering
* 3.3 Selection rules
* 3.4 Symmetry and polarization
* 4 Stimulated Raman scattering and Raman amplification
* 4.1 Requirement for space-coherence
* 5 Inverse Raman effect
* 5.1 Supercontinuum generation
* 6 Applications
* 7 See also
* 8 References
* 9 Further reading
* 10 External links

## History

First page of Molecular Diffraction of Light (1922)

The elastic light scattering phenomena called Rayleigh scattering, in which light retains its energy, was described in the 19th century. The intensity of Rayleigh scattering is about 10−3 to 10−4 compared to the intensity of the exciting source.[2] In 1908, another form of elastic scattering, called Mie scattering was discovered.

The inelastic scattering of light was predicted by Adolf Smekal in 1923[3] and in older German-language literature it has been referred to as the Smekal-Raman-Effekt.[4] In 1922, Indian physicist C. V. Raman published his work on the "Molecular Diffraction of Light", the first of a series of investigations with his collaborators that ultimately led to his discovery (on 16 February 1928) of the radiation effect that bears his name. The Raman effect was first reported by Raman and his coworker K. S. Krishnan,[5] and independently by Grigory Landsberg and Leonid Mandelstam, in Moscow on 21 February 1928 (5 days after Raman and Krishnan). In the former Soviet Union, Raman's contribution was always disputed; thus in Russian scientific literature the effect is usually referred to as "combination scattering" or "combinatory scattering". Raman received the Nobel Prize in 1930 for his work on the scattering of light.[6]

In 1998 the Raman effect was designated a National Historic Chemical Landmark by the American Chemical Society in recognition of its significance as a tool for analyzing the composition of liquids, gases, and solids.[7]

## Instrumentation

An early Raman spectrum of benzene published by Raman and Krishnan.[8] Schematic of a dispersive Raman spectroscopy setup in a 180° backscattering arrangement.[9]

Modern Raman spectroscopy nearly always involves the use of lasers as an exciting light source. Because lasers were not available until more than three decades after the discovery of the effect, Raman and Krishnan used a mercury lamp and photographic plates to record spectra.[10] Early spectra took hours or even days to acquire due to weak light sources, poor sensitivity of the detectors and the weak Raman scattering cross-sections of most materials. The most common modern detectors are charge-coupled devices (CCDs). Photodiode arrays and photomultiplier tubes were common prior to the adoption of CCDs.[11]

## Theory

The following focuses on the theory of normal (non-resonant, spontaneous, vibrational) Raman scattering of light by discrete molecules. X-ray Raman spectroscopy is conceptually similar but involves excitation of electronic, rather than vibrational, energy levels.

### Molecular vibrations

Main article: Physics:Molecular vibration

Raman scattering generally gives information about vibrations within a molecule. In the case of gases, information about rotational energy can also be gleaned.[12] For solids, phonon modes may also be observed.[13] The basics of infrared absorption regarding molecular vibrations apply to Raman scattering although the selection rules are different.

#### Degrees of freedom

Main article: Chemistry:Degrees of freedom (physics and chemistry)

For any given molecule, there are a total of 3N degrees of freedom, where N is the number of atoms. This number arises from the ability of each atom in a molecule to move in three dimensions.[14] When dealing with molecules, it is more common to consider the movement of the molecule as a whole. Consequently, the 3N degrees of freedom are partitioned into molecular translational, rotational, and vibrational motion. Three of the degrees of freedom correspond to translational motion of the molecule as a whole (along each of the three spatial dimensions). Similarly, three degrees of freedom correspond to rotations of the molecule about the x, y, and z-axes. Linear molecules only have two rotations because rotations along the bond axis do not change the positions of the atoms in the molecule. The remaining degrees of freedom correspond to molecular vibrational modes. These modes include stretching and bending motions of the chemical bonds of the molecule. For a linear molecule, the number of vibrational modes is 3N-5, whereas for a non-linear molecule the number of vibrational modes is 3N-6.[14]

#### Vibrational energy

Main article: Physics:Quantum harmonic oscillator

Molecular vibrational energy is known to be quantized and can be modeled using the quantum harmonic oscillator (QHO) approximation or a Dunham expansion when anharmonicity is important. The vibrational energy levels according to the QHO are

En=h(n+12)ν=h(n+12)12πkm,

where n is a quantum number. Since the selection rules for Raman and infrared absorption generally dictate that only fundamental vibrations are observed, infrared excitation or Stokes Raman excitation results in an energy change of E=hν=h2πkm

The energy range for vibrations is in the range of approximately 5 to 3500 cm−1. The fraction of molecules occupying a given vibrational mode at a given temperature follows a Boltzmann distribution. A molecule can be excited to a higher vibrational mode through the direct absorption of a photon of the appropriate energy, which falls in the terahertz or infrared range. This forms the basis of infrared spectroscopy. Alternatively, the same vibrational excitation can be produced by an inelastic scattering process. This is called Stokes Raman scattering, by analogy with the Stokes shift in fluorescence discovered by George Stokes in 1852, with light emission at longer wavelength (now known to correspond to lower energy) than the absorbed incident light. Conceptually similar effects can be caused by neutrons or electrons rather than light.[15] An increase in photon energy which leaves the molecule in a lower vibrational energy state is called anti-Stokes scattering.

### Raman scattering

Raman scattering is conceptualized as involving a virtual electronic energy level which corresponds to the energy of the exciting laser photons. Absorption of a photon excites the molecule to the imaginary state and re-emission leads to Raman or Rayleigh scattering. In all three cases the final state has the same electronic energy as the initial state but is higher in vibrational energy in the case of Stokes Raman scattering, lower in the case of anti-Stokes Raman scattering or the same in the case of Rayleigh scattering. Normally this is thought of in terms of wavenumbers, where ν~0 is the wavenumber of the laser and ν~M is the wavenumber of the vibrational transition. Thus Stokes scattering gives a wavenumber of ν~0−ν~M while ν~0+ν~M is given for anti-Stokes. When the exciting laser energy corresponds to an actual electronic excitation of the molecule then the resonance Raman effect occurs.

A classical physics based model is able to account for Raman scattering and predicts an increase in the intensity which scales with the fourth-power of the light frequency. Light scattering by a molecule is associated with oscillations of an induced electric dipole. The oscillating electric field component of electromagnetic radiation may bring about an induced dipole in a molecule which follows the alternating electric field which is modulated by the molecular vibrations. Oscillations at the external field frequency are therefore observed along with beat frequencies resulting from the external field and normal mode vibrations.[10][2]

The different possibilities of light scattering: Rayleigh scattering (no exchange of energy: incident and scattered photons have the same energy), Stokes Raman scattering (atom or molecule absorbs energy: scattered photon has less energy than the incident photon) and anti-Stokes Raman scattering (atom or molecule loses energy: scattered photon has more energy than the incident photon)

The spectrum of the scattered photons is termed the Raman spectrum. It shows the intensity of the scattered light as a function of its frequency difference Δν to the incident photons, more commonly called a Raman shift. The locations of corresponding Stokes and anti-Stokes peaks form a symmetric pattern around the RayleighΔν=0 line. The frequency shifts are symmetric because they correspond to the energy difference between the same upper and lower resonant states. The intensities of the pairs of features will typically differ, though. They depend on the populations of the initial states of the material, which in turn depend on the temperature. In thermodynamic equilibrium, the lower state will be more populated than the upper state. Therefore, the rate of transitions from the more populated lower state to the upper state (Stokes transitions) will be higher than in the opposite direction (anti-Stokes transitions). Correspondingly, Stokes scattering peaks are stronger than anti-Stokes scattering peaks. Their ratio depends on the temperature, and can therefore be exploited to measure it:

IStokesIanti-Stokes=(ν~0−ν~M)4(ν~0+ν~M)4exp⁡(hcν~MkBT)

### Selection rules

In contrast to IR spectroscopy, where there is a requirement for a change in dipole moment for vibrational excitation to take place, Raman scattering requires a change in polarizability. A Raman transition from one state to another is allowed only if the molecular polarizability of those states is different. For a vibration, this means that the derivative of the polarizability with respect to the normal coordinate associated to the vibration is non-zero: ∂α∂Q≠0. In general, a normal mode is Raman active if it transforms with the same symmetry of the quadratic forms (x2,y2,z2,xy,xz,yz), which can be verified from the character table of the molecule's point group. As with IR spectroscopy, only fundamental excitations (Δν=±1) are allowed according to the QHO. There are however many cases where overtones are observed. The rule of mutual exclusion, which states that vibrational modes cannot be both IR and Raman active, applies to certain molecules.

The specific selection rules state that the allowed rotational transitions are ΔJ=±2, where J is the rotational state. This generally is only relevant to molecules in the gas phase where the Raman linewidths are small enough for rotational transitions to be resolved.

A selection rule relevant only to ordered solid materials states that only phonons with zero phase angle can be observed by IR and Raman, except when phonon confinement is manifest.[13]

### Symmetry and polarization

Main article: Depolarization ratio

Monitoring the polarization of the scattered photons is useful for understanding the connections between molecular symmetry and Raman activity which may assist in assigning peaks in Raman spectra.[16] Light polarized in a single direction only gives access to some Raman–active modes, but rotating the polarization gives access to other modes. Each mode is separated according to its symmetry.[17]

The symmetry of a vibrational mode is deduced from the depolarization ratio ρ, which is the ratio of the Raman scattering with polarization orthogonal to the incident laser and the Raman scattering with the same polarization as the incident laser: ρ=IrIu Here Ir is the intensity of Raman scattering when the analyzer is rotated 90 degrees with respect to the incident light's polarization axis, and Iu the intensity of Raman scattering when the analyzer is aligned with the polarization of the incident laser.[18] When polarized light interacts with a molecule, it distorts the molecule which induces an equal and opposite effect in the plane-wave, causing it to be rotated by the difference between the orientation of the molecule and the angle of polarization of the light wave. If ρ≥34, then the vibrations at that frequency are depolarized; meaning they are not totally symmetric.[19][18]

## Stimulated Raman scattering and Raman amplification

The Raman-scattering process as described above takes place spontaneously; i.e., in random time intervals, one of the many incoming photons is scattered by the material. This process is thus called spontaneous Raman scattering.

On the other hand, stimulated Raman scattering can take place when some Stokes photons have previously been generated by spontaneous Raman scattering (and somehow forced to remain in the material), or when deliberately injecting Stokes photons ("signal light") together with the original light ("pump light"). In that case, the total Raman-scattering rate is increased beyond that of spontaneous Raman scattering: pump photons are converted more rapidly into additional Stokes photons. The more Stokes photons that are already present, the faster more of them are added. Effectively, this amplifies the Stokes light in the presence of the pump light, which is exploited in Raman amplifiers and Raman lasers.

Stimulated Raman scattering is a nonlinear optical effect.

### Requirement for space-coherence

Suppose that the distance between two points A and B of an exciting beam is x. Generally, as the exciting frequency is not equal to the scattered Raman frequency, the corresponding relative wavelengths λ and λ' are not equal. Thus, a phase-shift Θ = 2πx(1/λ − 1/λ') appears. For Θ = π, the scattered amplitudes are opposite, so that the Raman scattered beam remains weak.

* A crossing of the beams may limit the path x.

Several tricks may be used to get a larger amplitude:

* Light may be pulsed, so that beats do not appear. In Impulsive Stimulated Raman Scattering (ISRS),[20][21][22][23] the length of the pulses must be shorter than all relevant time constants.[24] Interference of Raman and incident lights is too short to allow beats, so that it produces a frequency shift roughly, in best conditions, inversely proportional to the cube of the pulse length.

## Inverse Raman effect

The inverse Raman effect is a form of Raman scattering first noted by W. J. Jones and Boris P. Stoicheff. In some circumstances, Stokes scattering can exceed anti-Stokes scattering; in these cases the continuum (on leaving the material) is observed to have an absorption line (a dip in intensity) at νL+νM. This phenomenon is referred to as the inverse Raman effect; the application of the phenomenon is referred to as inverse Raman spectroscopy, and a record of the continuum is referred to as an inverse Raman spectrum.

In the original description of the inverse Raman effect,[25] the authors discuss both absorption from a continuum of higher frequencies and absorption from a continuum of lower frequencies. They note that absorption from a continuum of lower frequencies will not be observed if the Raman frequency of the material is vibrational in origin and if the material is in thermal equilibrium.

### Supercontinuum generation

## Applications

Raman spectroscopy employs the Raman effect for substances analysis. The spectrum of the Raman-scattered light depends on the molecular constituents present and their state, allowing the spectrum to be used for material identification and analysis. Raman spectroscopy is used to analyze a wide range of materials, including gases, liquids, and solids. Highly complex materials such as biological organisms and human tissue[26] can also be analyzed by Raman spectroscopy.

For solid materials, Raman scattering is used as a tool to detect high-frequency phonon and magnon excitations.

Raman lidar is used in atmospheric physics to measure the atmospheric extinction coefficient and the water vapour vertical distribution.

Due to its velocity-selective nature, the stimulated Raman transition is useful for cooling atoms.[27] It also enables the construction of atom interferometer by providing a well-defined momentum kick.[28] Stimulated Raman transitions are also widely used for manipulating a trapped ion's energy levels, and thus basis qubit states.

Raman spectroscopy can be used to determine the force constant and bond length for molecules that do not have an infrared absorption spectrum.

Raman amplification is used in optical amplifiers.

The Raman effect is also involved in producing the appearance of the blue sky (see Rayleigh Scattering: 'Rayleigh scattering of molecular nitrogen and oxygen in the atmosphere includes elastic scattering as well as the inelastic contribution from rotational Raman scattering in air').

Raman spectroscopy has been used to chemically image small molecules, such as nucleic acids, in biological systems by a vibrational tag.[29]

## See also

* Brillouin scattering
* Coherent anti-Stokes Raman spectroscopy (CARS)
* Coherent Raman Scattering Microscopy (CRS)
* Depolarization ratio
* Fiber amplifier
* List of surface analysis methods
* National Science Day (India)
* Nonlinear optics
* Raman laser
* Raman spectroscopy
* Resonance Raman spectroscopy (RR)
* Scattering
* Surface Enhanced Raman Spectroscopy (SERS)

## References

1. ↑ Harris and Bertolucci (1989). Symmetry and Spectroscopy. Dover Publications. ISBN 978-0-486-66144-5.
2. ↑ 2.0 2.1 Keresztury, Gábor (2002). "Raman Spectroscopy: Theory". Handbook of Vibrational Spectroscopy. 1. Chichester: Wiley. ISBN 0-471-98847-2.
3. ↑ Smekal, A. (1923). "Zur Quantentheorie der Dispersion". Naturwissenschaften 11 (43): 873–875. doi:10.1007/BF01576902. Bibcode: 1923NW.....11..873S.
4. ↑ Nature (19 December 1931). "A review of the 1931 book Der Smekal-Raman-Effekt". Nature 128 (3242): 1026. doi:10.1038/1281026c0.
5. ↑ Raman, C. V. (1928). "A new radiation". Indian Journal of Physics 2: 387–398. "Inaugural Address delivered to the South Indian Science Association on Friday, the 16th March, 1928".
6. ↑ Singh, R. (2002). "C. V. Raman and the Discovery of the Raman Effect". Physics in Perspective 4 (4): 399–420. doi:10.1007/s000160200002. Bibcode: 2002PhP.....4..399S.
7. ↑ "C. V. Raman: The Raman Effect". American Chemical Society. http://portal.acs.org/portal/PublicWebSite/education/whatischemistry/landmarks/ramaneffect/index.htm.
8. ↑ K. S. Krishnan; Raman, C. V. (1928). "The Negative Absorption of Radiation" (in en). Nature 122 (3062): 12–13. doi:10.1038/122012b0. ISSN 1476-4687. Bibcode: 1928Natur.122...12R.
9. ↑ Thomas Schmid; Petra Dariz (2019). "Raman Microspectroscopic Imaging of Binder Remnants in Historical Mortars Reveals Processing Conditions". Heritage 2 (2): 1662–1683. doi:10.3390/heritage2020102. ISSN 2571-9408.
10. ↑ 10.0 10.1 Long, Derek A. (2002) (in en). The Raman Effect. John Wiley & Sons, Ltd. doi:10.1002/0470845767. ISBN 978-0-471-49028-9.
11. ↑ McCreery, Richard L. (2000). Raman spectroscopy for chemical analysis. New York: John Wiley & Sons. ISBN 0-471-23187-8. OCLC 58463983.
12. ↑ Weber, Alfons (2002). "Raman Spectroscopy of Gases". Handbook of Vibrational Spectroscopy. 1. Chichester: Wiley. ISBN 0-471-98847-2.
13. ↑ 13.0 13.1 Everall, Neil J. (2002). "Raman Spectroscopy of the Condensed Phase". Handbook of Vibrational Spectroscopy. 1. Chichester: Wiley. ISBN 0-471-98847-2.
14. ↑ 14.0 14.1 Keith J. Laidler and John H. Meiser, Physical Chemistry (Benjamin/Cummings 1982), pp.646-7 ISBN 0-8053-5682-7
15. ↑ Krivanek, O. L.; Dellby, N.; Hachtel, J. A.; Idrobo, J. -C.; Hotz, M. T.; Plotkin-Swing, B.; Bacon, N. J.; Bleloch, A. L. et al. (2019-08-01). "Progress in ultrahigh energy resolution EELS". Ultramicroscopy. 75th Birthday of Christian Colliex, 85th Birthday of Archie Howie, and 75th Birthday of Hannes Lichte / PICO 2019 - Fifth Conference on Frontiers of Aberration Corrected Electron Microscopy 203: 60–67. doi:10.1016/j.ultramic.2018.12.006. ISSN 0304-3991. PMID 30577954.
16. ↑ Itoh, Yuki; Hasegawa, Takeshi (May 2, 2012). "Polarization Dependence of Raman Scattering from a Thin Film Involving Optical Anisotropy Theorized for Molecular Orientation Analysis". The Journal of Physical Chemistry A 116 (23): 5560–5570. doi:10.1021/jp301070a. PMID 22551093. Bibcode: 2012JPCA..116.5560I.
17. ↑ Iliev, M. N.; Abrashev, M. V.; Laverdiere, J.; Jandi, S. et al. (February 16, 2006). "Distortion-dependent Raman spectra and mode mixing in RMnO3 perovskites (R=La,Pr,Nd,Sm,Eu,Gd,Tb,Dy,Ho,Y)". Physical Review B 73 (6). doi:10.1103/physrevb.73.064302. Bibcode: 2006PhRvB..73f4302I.
18. ↑ 18.0 18.1 Banwell, Colin N.; McCash, Elaine M. (1994). Fundamentals of Molecular Spectroscopy (4th ed.). McGraw–Hill. pp. 117–8. ISBN 978-0-07-707976-5.
19. ↑ "What is polarised Raman spectroscopy? - HORIBA". http://www.horiba.com/us/en/scientific/products/Raman-spectroscopy/Raman-academy/Raman-faqs/what-is-polarised-Raman-spectroscopy/.
20. ↑ Weiner, A. M.; Wiederrecht, Gary P.; Nelson, Keith A.; Leaird, D. E. (1991). "Femtosecond multiple-pulse impulsive stimulated Raman scattering spectroscopy". Journal of the Optical Society of America B 8 (6): 1264. doi:10.1364/JOSAB.8.001264. Bibcode: 1991JOSAB...8.1264W.
21. ↑ Dhar, Lisa; Rogers, John A.; Nelson, Keith A. (1994). "Time-resolved vibrational spectroscopy in the impulsive limit". Chemical Reviews 94 (1): 157–193. doi:10.1021/cr00025a006.
22. ↑ Kosloff, Ronnie; Hammerich, Audrey Dell; Tannor, David (1992). "Excitation without demolition: Radiative excitation of ground-surface vibration by impulsive stimulated Raman scattering with damage control". Physical Review Letters 69 (15): 2172–2175. doi:10.1103/PhysRevLett.69.2172. PMID 10046417. Bibcode: 1992PhRvL..69.2172K.
23. ↑ Voehringer, Peter; Scherer, Norbert F. (1995). "Transient Grating Optical Heterodyne Detected Impulsive Stimulated Raman Scattering in Simple Liquids". The Journal of Physical Chemistry 99 (9): 2684–2695. doi:10.1021/j100009a027.
24. ↑ Lamb, G. L. (1971). "Analytical Descriptions of Ultrashort Optical Pulse Propagation in a Resonant Medium". Reviews of Modern Physics 43 (2): 99–124. doi:10.1103/RevModPhys.43.99. Bibcode: 1971RvMP...43...99L.
25. ↑ Jones, W. J.; Stoicheff, B. P. (1964-11-30). "Inverse Raman Spectra: Induced Absorption at Optical Frequencies" (in en). Physical Review Letters 13 (22): 657–659. doi:10.1103/PhysRevLett.13.657. ISSN 0031-9007. Bibcode: 1964PhRvL..13..657J.
26. ↑ "Painless laser device could spot early signs of disease". BBC News. 27 September 2010. https://www.bbc.co.uk/news/science-environment-11390951.
27. ↑ Kasevich, Mark; Chu, Steven (1992-09-21). "Laser Cooling below a Photon Recoil with Three-Level Atoms" (in en). Phys. Rev. Lett. 69 (12): 1741–1744. doi:10.1103/PhysRevLett.69.1741.
28. ↑ Kasevich, Mark; Chu, Steven (1991-07-08). "Atomic interferometry using stimulated Raman transitions" (in en). Phys. Rev. Lett. 67 (2): 181–184. doi:10.1103/PhysRevLett.67.181.
29. ↑ Wei, Lu; Hu, Fanghao; Chen, Zhixing; Shen, Yihui; Zhang, Luyuan; Min, Wei (2016-08-16). "Live-Cell Bioorthogonal Chemical Imaging: Stimulated Raman Scattering Microscopy of Vibrational Probes" (in en). Accounts of Chemical Research 49 (8): 1494–1502. doi:10.1021/acs.accounts.6b00210. ISSN 0001-4842. PMID 27486796.

## Further reading

* Klingshirn, Claus F. (2012). Semiconductor Optics. Graduate Texts in Physics. doi:10.1007/978-3-642-28362-8. ISBN 978-3-642-28361-1. Bibcode: 2012seop.book.....K.

## External links

* Explanation from Hyperphysics in Astronomy section of gsu.edu
* Prof. R. W. Wood Demonstrating the New "Raman Effect" in Physics (Scientific American, December 1930)

* v
* t
* e

Raman spectroscopy

Techniques|

* Coherent anti-Stokes Raman spectroscopy
* Raman optical activity
* Resonance Raman spectroscopy
* Rotating-polarization coherent anti-Stokes Raman spectroscopy
* Spatially offset Raman spectroscopy
* Stimulated Raman spectroscopy
* Surface-enhanced Raman spectroscopy
* Tip-enhanced Raman spectroscopy
* Transmission Raman spectroscopy

Applications|

* Raman amplification
* Raman cooling
* Raman laser
* Raman microscope
* SHERLOC
* Stimulated Raman adiabatic passage

Theory|

* Depolarization ratio
* Four-wave mixing
* Nonlinear optics
* Raman scattering
* Rayleigh scattering
* Rule of mutual exclusion
* Stokes shift

Journals|

* Journal of Raman Spectroscopy

* Category
* Commons
* Spectroscopy

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Raman scattering. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Raman_scattering&oldid=4127462"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template