Carbon nanotube

Short description: Allotropes of carbon with a cylindrical nanostructure

Error creating thumbnail:

A scanning tunneling microscopy image of a single-walled carbon nanotube.

Error creating thumbnail:

Rotating single-walled zigzag carbon nanotube

Part of a series of articles on

Nanomaterials
File:C60-rods.png
Carbon nanotubes

* Synthesis
* Chemistry
* Mechanical properties
* Optical properties
* Applications
* Timeline

Fullerenes

* Buckminsterfullerene
* C70 fullerene
* Chemistry
* Health impact
* Carbon allotropes

Other nanoparticles

* Quantum dots
* Aluminium oxide
* Cellulose
* Ceramic
* Cobalt oxide
* Copper
* Gold
* Iron
* Iron oxide
* Iron–platinum
* Lipid
* Platinum
* Silver
* Titanium dioxide

Nanostructured materials

* Nanocomposite
* Nanofoam
* Nanoporous materials
* Nanocrystalline material

*   *

* v
* t
* e

A carbon nanotube (CNT) is a molecular-scale structure consisting of carbon atoms arranged in one or more cylindrical layers, joined by covalent bonds in a hexagonal tiling pattern within each layer, so as to form a hollow tube up to a few hundred nanometres in diameter. Carbon nanotubes are considered to be allotropes of carbon, intermediate between fullerene cages and flat graphene sheets (as in graphite).

A single-wall carbon nanotube (SWCNT) has a single cylindrical layer of atoms, comprising a single molecule, with diameter in the range of a nanometer.[1] A multi-wall carbon nanotube (MWCNT) may consist of two or more nested single-wall carbon nanotubes, joined mostly by weak inter-molecular forces;[1] or may be a single graphene-like sheet rolled up several times around a cylindrical hollow.[2] The term "carbon nanotube" has also been used, more generically, for carbon tubes with undetermined wall structure and diameters less than 100 nanometers.[3][4]

While nanotubes of other compositions exist, most research has been focused on the carbon ones. Therefore, the "carbon" qualifier is often left implicit in the acronyms, and the names are abbreviated NT, SWNT, and MWNT.

Common production methods yield nanotubes with variable lengths, but usually much larger than their diameters. Although rare, nanotubes half a meter long have been created, with a length-to-diameter ratio of more than 100,000,000:1.[5] The "dangling" bonds of carbon atoms along the edges at the ends of the tube are usually satisfied by various chemical groups, such as hydroxyl (–OH) or hydrogen (–H); however, the influence of these terminating groups usually becomes negligible as the tube length increases. In many practical and theoretical contexts, carbon nanotubes can be idealized as having infinite length and no edges.

Infinitely-long single-wall carbon nanotubes have helical and translational symmetry along the tube axis and many also have nontrivial rotational symmetry about this axis. Although not manufactured this way, an SWCNT can be thought of as a strip cut out from a flat graphene sheet—a hexagonal lattice of carbon atoms—rolled up along one of the Bravais vectors to form a hollow cylinder, with the atoms along the edges bonded so as to form a seamless lattice with helical symmetry.[1] This theoretical construction gives a classification of single-wall carbon nanotubes into infinitely many non-congruent types, each labeled by a pair of small integers.[6] Some of these types are chiral, meaning the tube and its mirror image cannot be superimposed–even though both have the same chemical and physical properties, apart from handedness.[6]

Carbon nanotubes can exhibit remarkable electrical conductivity.[7][8] Some achiral SWCNT types are metallic,[7] but all the rest are either small or moderate band gap semiconductors.[6] They also have exceptional tensile strength[9] and thermal conductivity,[10][11] because of their nanostructure and strength of the bonds between carbon atoms. In addition, they can be chemically modified.[12] Individual carbon nanotubes naturally align themselves into "ropes" held together by relatively weak van der Waals forces.

Carbon nanotubes are expected to be valuable in many areas of technology, such as electronics, optics, composite materials (replacing or complementing carbon fibers), nanotechnology, and other applications of materials science.

The observation of carbon tubes of 50 nm diameter was reported in 1952 by Radushkevich and Lukyanovich in the Soviet Union.[3][4] Similar structures were re-discovered and even patented several times in the following years; however, these reports attracted little attention at the time.[4] In 1971, Oberlin, Endo and Koyama reported the observation of rolled-up multi-wall tubes.[2] Research on these structures only took off after the independent (re)discovery and characterization of single-wall nanotubes by Iijima and Ichihashi[13] and Bethune et al.[14] in 1991.

## Contents

* 1 Structure of single-walled tubes
* 1.1 The zigzag and armchair configurations
* 1.2 The (n,m) notation
* 1.3 Nanotube types
* 1.4 Chirality and mirror symmetry
* 1.5 Circumference and diameter
* 2 Physical limits
* 2.1 Narrowest nanotubes
* 2.2 Length
* 2.3 Density
* 3 Variants
* 3.1 Multi-walled
* 3.2 Junctions and crosslinking
* 3.3 Other morphologies
* 4 Properties
* 4.1 Mechanical
* 4.2 Electrical
* 4.3 Optical
* 4.4 Thermal
* 5 Synthesis
* 6 Modeling
* 7 Metrology
* 8 Chemical modification
* 9 Applications
* 9.1 Current
* 9.2 Under development
* 9.3 Potential
* 10 Safety and health
* 11 History
* 12 See also
* 13 References
* 14 External links

## Structure of single-walled tubes

The structure of an ideal (infinitely long) single-walled carbon nanotube is that of a regular hexagonal lattice drawn on an infinite cylindrical surface, whose vertices are the positions of the carbon atoms. Since the length of the carbon-carbon bonds is fairly fixed, there are constraints on the diameter of the cylinder and the arrangement of the atoms on it.[15]

### The zigzag and armchair configurations

In the study of nanotubes, one defines a "zigzag" path on a graphene-like lattice as a path that turns 60 degrees, alternating left and right, after stepping through each bond. It is also conventional to define an "armchair" path as one that makes two left turns of 60 degrees followed by two right turns every four steps.

On some carbon nanotubes, there is a closed zigzag path that goes around the tube. One says that the tube is of the zigzag type or configuration, or simply is a zigzag nanotube. If the tube is instead encircled by a closed armchair path, it is said to be of the armchair type, or an armchair nanotube.

Error creating thumbnail:

Zigzag nanotube

Error creating thumbnail:

Armchair nanotube

|

An infinite nanotube that is of the zigzag (or armchair) type consists entirely of closed zigzag (or armchair) paths, connected to each other.

### The (n,m) notation

Error creating thumbnail:

A "sliced and unrolled" representation of a carbon nanotube as a strip of a graphene molecule, overlaid on diagram of the full molecule (faint background). The arrow shows the gap A2 where the atom A1 on one edge of the strip would fit in the opposite edge, as the strip is rolled up.

The zigzag and armchair configurations are not the only structures that a single-walled nanotube can have. To describe the structure of a general infinitely long tube, one should imagine it being sliced open by a cut parallel to its axis, that goes through some atom A, and then unrolled flat on the plane, so that its atoms and bonds coincide with those of an imaginary graphene sheet—more precisely, with an infinitely long strip of that sheet.

The two halves of the atom A will end up on opposite edges of the strip, over two atoms A1 and A2 of the graphene. The line from A1 to A2 will correspond to the circumference of the cylinder that went through the atom A, and will be perpendicular to the edges of the strip.

In the graphene lattice, the atoms can be split into two classes, depending on the directions of their three bonds. Half the atoms have their three bonds directed the same way, and half have their three bonds rotated 180 degrees relative to the first half. The atoms A1 and A2, which correspond to the same atom A on the cylinder, must be in the same class.

It follows that the circumference of the tube and the angle of the strip are not arbitrary, because they are constrained to the lengths and directions of the lines that connect pairs of graphene atoms in the same class.

File:Nanotube strip master.pdf

The basis vectors u and v of the relevant sub-lattice, the (n,m) pairs that define non-isomorphic carbon nanotube structures (red dots), and the pairs that define the enantiomers of the chiral ones (blue dots).

Let u and v be two linearly independent vectors that connect the graphene atom A1 to two of its nearest atoms with the same bond directions. That is, if one numbers consecutive carbons around a graphene cell with C1 to C6, then u can be the vector from C1 to C3, and v be the vector from C1 to C5. Then, for any other atom A2 with same class as A1, the vector from A1 to A2 can be written as a linear combination n u \+ m v, where n and m are integers. And, conversely, each pair of integers (n,m) defines a possible position for A2.[15]

Given n and m, one can reverse this theoretical operation by drawing the vector w on the graphene lattice, cutting a strip of the latter along lines perpendicular to w through its endpoints A1 and A2, and rolling the strip into a cylinder so as to bring those two points together. If this construction is applied to a pair (k,0), the result is a zigzag nanotube, with closed zigzag paths of 2k atoms. If it is applied to a pair (k,k), one obtains an armchair tube, with closed armchair paths of 4k atoms.

### Nanotube types

Moreover, the structure of the nanotube is not changed if the strip is rotated by 60 degrees clockwise around A1 before applying the hypothetical reconstruction above. Such a rotation changes the corresponding pair (n,m) to the pair (−2m,n+m).

It follows that many possible positions of A2 relative to A1 — that is, many pairs (n,m) — correspond to the same arrangement of atoms on the nanotube. That is the case, for example, of the six pairs (1,2), (−2,3), (−3,1), (−1,−2), (2,−3), and (3,−1). In particular, the pairs (k,0) and (0,k) describe the same nanotube geometry.

These redundancies can be avoided by considering only pairs (n,m) such that n > 0 and m ≥ 0; that is, where the direction of the vector w lies between those of u (inclusive) and v (exclusive). It can be verified that every nanotube has exactly one pair (n,m) that satisfies those conditions, which is called the tube's type. Conversely, for every type there is a hypothetical nanotube. In fact, two nanotubes have the same type if and only if one can be conceptually rotated and translated so as to match the other exactly.

Instead of the type (n,m), the structure of a carbon nanotube can be specified by giving the length of the vector w (that is, the circumference of the nanotube), and the angle α between the directions of u and w, which may range from 0 (inclusive) to 60 degrees clockwise (exclusive). If the diagram is drawn with u horizontal, the latter is the tilt of the strip away from the vertical.

Here are some unrolled nanotube diagrams:

* Chiral nanotube of the (3,1) type.

* Chiral nanotube of the (1,3) type, mirror image of the (3,1) type.

* Nanotube of the (2,2) type, the narrowest "armchair" one

* Nanotube of the (3,0) type, the narrowest "zigzag" one

### Chirality and mirror symmetry

A nanotube is chiral if it has type (n,m), with m > 0 and m ≠ n; then its enantiomer (mirror image) has type (m,n), which is different from (n,m). This operation corresponds to mirroring the unrolled strip about the line L through A1 that makes an angle of 30 degrees clockwise from the direction of the u vector (that is, with the direction of the vector u+v). The only types of nanotubes that are achiral are the (k,0) "zigzag" tubes and the (k,k) "armchair" tubes.

If two enantiomers are to be considered the same structure, then one may consider only types (n,m) with 0 ≤ m ≤ n and n > 0\. Then the angle α between u and w, which may range from 0 to 30 degrees (inclusive both), is called the "chiral angle" of the nanotube.

### Circumference and diameter

From n and m one can also compute the circumference c, which is the length of the vector w, which turns out to be

[math]\displaystyle{ c = \left|\boldsymbol{u}\right| \sqrt{(n^2 + n m + m^2)} \approx 246 \sqrt{((n+m)^2-n m)} }[/math]

in picometres. The diameter [math]\displaystyle{ d }[/math] of the tube is then [math]\displaystyle{ c/\pi }[/math], that is

[math]\displaystyle{ d \approx 78.3 \sqrt{((n+m)^2-n m)} }[/math]

also in picometres. (These formulas are only approximate, especially for small n and m where the bonds are strained; and they do not take into account the thickness of the wall.)

The tilt angle α between u and w and the circumference c are related to the type indices n and m by

[math]\displaystyle{ \alpha \;=\; \arg(n + m/2,\, m \sqrt{3}/2) \;=\; \mathop{\mathrm{arc}}\cos\frac{n + m/2}{c} }[/math]

where arg(x,y) is the clockwise angle between the X-axis and the vector (x,y); a function that is available in many programming languages as `atan2`(y,x). Conversely, given c and α, one can get the type (n,m) by the formulas

[math]\displaystyle{ m = \frac{2 c}{\sqrt{3}}\sin \alpha \quad\quad n = c \cos\alpha - \frac{m}{2} }[/math]

which must evaluate to integers.

## Physical limits

### Narrowest nanotubes

If n and m are too small, the structure described by the pair (n,m) will describe a molecule that cannot be reasonably called a "tube", and may not even be stable. For example, the structure theoretically described by the pair (1,0) (the limiting "zigzag" type) would be just a chain of carbons. That is a real molecule, the carbyne; which has some characteristics of nanotubes (such as orbital hybridization, high tensile strength, etc.) — but has no hollow space, and may not be obtainable as a condensed phase. The pair (2,0) would theoretically yield a chain of fused 4-cycles; and (1,1), the limiting "armchair" structure, would yield a chain of bi-connected 4-rings. These structures may not be realizable.

The thinnest carbon nanotube proper is the armchair structure with type (2,2), which has a diameter of 0.3 nm. This nanotube was grown inside a multi-walled carbon nanotube. Assigning of the carbon nanotube type was done by a combination of high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and density functional theory (DFT) calculations.[16]

The thinnest freestanding single-walled carbon nanotube is about 0.43 nm in diameter.[17] Researchers suggested that it can be either (5,1) or (4,2) SWCNT, but the exact type of the carbon nanotube remains questionable.[18] (3,3), (4,3), and (5,1) carbon nanotubes (all about 0.4 nm in diameter) were unambiguously identified using aberration-corrected high-resolution transmission electron microscopy inside double-walled CNTs.[19]

Here are some tube types that are "degenerate" for being too narrow:

* Degenerate "zigzag" tube type (1,0)

* Degenerate "zigzag" tube type (2,0)

* Degenerate "armchair" tube type (1,1)

* Possibly degenerate chiral tube type (2,1)

### Length

Error creating thumbnail:

Cycloparaphenylene

The observation of the longest carbon nanotubes grown so far, around 1/2 meter (550 mm long), was reported in 2013.[5] These nanotubes were grown on silicon substrates using an improved chemical vapor deposition (CVD) method and represent electrically uniform arrays of single-walled carbon nanotubes.[20]

The shortest carbon nanotube can be considered to be the organic compound cycloparaphenylene, which was synthesized in 2008.[21]

### Density

The highest density of CNTs was achieved in 2013, grown on a conductive titanium-coated copper surface that was coated with co-catalysts cobalt and molybdenum at lower than typical temperatures of 450 °C. The tubes averaged a height of 380 nm and a mass density of 1.6 g cm−3. The material showed ohmic conductivity (lowest resistance ∼22 kΩ).[22][23]

## Variants

There is no consensus on some terms describing carbon nanotubes in scientific literature: both "-wall" and "-walled" are being used in combination with "single", "double", "triple", or "multi", and the letter C is often omitted in the abbreviation, for example, multi-walled carbon nanotube (MWNT). International Standards Organization uses single-wall or multi-wall in its documents.

### Multi-walled

Triple-walled armchair carbon nanotube

Multi-walled nanotubes (MWNTs) consist of multiple rolled layers (concentric tubes) of graphene. There are two models that can be used to describe the structures of multi-walled nanotubes. In the Russian Doll model, sheets of graphite are arranged in concentric cylinders, e.g., a (0,8) single-walled nanotube (SWNT) within a larger (0,17) single-walled nanotube. In the Parchment model, a single sheet of graphite is rolled in around itself, resembling a scroll of parchment or a rolled newspaper. The interlayer distance in multi-walled nanotubes is close to the distance between graphene layers in graphite, approximately 3.4 Å. The Russian Doll structure is observed more commonly. Its individual shells can be described as SWNTs, which can be metallic or semiconducting. Because of statistical probability and restrictions on the relative diameters of the individual tubes, one of the shells, and thus the whole MWNT, is usually a zero-gap metal.[24]

Double-walled carbon nanotubes (DWNTs) form a special class of nanotubes because their morphology and properties are similar to those of SWNTs but they are more resistant to chemicals. This is especially important when it is necessary to graft chemical functions to the surface of the nanotubes (functionalization) to add properties to the CNT. Covalent functionalization of SWNTs will break some C=C double bonds, leaving "holes" in the structure on the nanotube and thus modifying both its mechanical and electrical properties. In the case of DWNTs, only the outer wall is modified. DWNT synthesis on the gram-scale by the CCVD technique was first proposed in 2003[25] from the selective reduction of oxide solutions in methane and hydrogen.

The telescopic motion ability of inner shells[26] and their unique mechanical properties[27] will permit the use of multi-walled nanotubes as the main movable arms in upcoming nanomechanical devices.[speculation?] The retraction force that occurs to telescopic motion is caused by the Lennard-Jones interaction between shells, and its value is about 1.5 nN.[28]

### Junctions and crosslinking

File:Nanotube junction.jpg

Transmission electron microscope image of carbon nanotube junction

Junctions between two or more nanotubes have been widely discussed theoretically.[29][30] Such junctions are quite frequently observed in samples prepared by arc discharge as well as by chemical vapor deposition. The electronic properties of such junctions were first considered theoretically by Lambin et al.,[31] who pointed out that a connection between a metallic tube and a semiconducting one would represent a nanoscale heterojunction. Such a junction could therefore form a component of a nanotube-based electronic circuit. The adjacent image shows a junction between two multiwalled nanotubes.

Junctions between nanotubes and graphene have been considered theoretically[32] and studied experimentally.[33] Nanotube-graphene junctions form the basis of pillared graphene, in which parallel graphene sheets are separated by short nanotubes.[34] Pillared graphene represents a class of three-dimensional carbon nanotube architectures.

Error creating thumbnail:

3D carbon scaffolds

Recently, several studies have highlighted the prospect of using carbon nanotubes as building blocks to fabricate three-dimensional macroscopic (>100 nm in all three dimensions) all-carbon devices. Lalwani et al. have reported a novel radical-initiated thermal crosslinking method to fabricate macroscopic, free-standing, porous, all-carbon scaffolds using single- and multi-walled carbon nanotubes as building blocks.[35] These scaffolds possess macro-, micro-, and nano-structured pores, and the porosity can be tailored for specific applications. These 3D all-carbon scaffolds/architectures may be used for the fabrication of the next generation of energy storage, supercapacitors, field emission transistors, high-performance catalysis, photovoltaics, and biomedical devices, implants, and sensors.[36][37]

### Other morphologies

A stable nanobud structure

Carbon nanobuds are a newly created material combining two previously discovered allotropes of carbon: carbon nanotubes and fullerenes. In this new material, fullerene-like "buds" are covalently bonded to the outer sidewalls of the underlying carbon nanotube. This hybrid material has useful properties of both fullerenes and carbon nanotubes. In particular, they have been found to be exceptionally good field emitters.[38] In composite materials, the attached fullerene molecules may function as molecular anchors preventing slipping of the nanotubes, thus improving the composite's mechanical properties.

A carbon peapod[39][40] is a novel hybrid carbon material which traps fullerene inside a carbon nanotube. It can possess interesting magnetic properties with heating and irradiation. It can also be applied as an oscillator during theoretical investigations and predictions.[41][42]

In theory, a nanotorus is a carbon nanotube bent into a torus (doughnut shape). Nanotori are predicted to have many unique properties, such as magnetic moments 1000 times larger than that previously expected for certain specific radii.[43] Properties such as magnetic moment, thermal stability, etc. vary widely depending on the radius of the torus and the radius of the tube.[43][44]

Graphenated carbon nanotubes are a relatively new hybrid that combines graphitic foliates grown along the sidewalls of multiwalled or bamboo style CNTs. The foliate density can vary as a function of deposition conditions (e.g., temperature and time) with their structure ranging from a few layers of graphene (< 10) to thicker, more graphite-like.[45] The fundamental advantage of an integrated graphene-CNT structure is the high surface area three-dimensional framework of the CNTs coupled with the high edge density of graphene. Depositing a high density of graphene foliates along the length of aligned CNTs can significantly increase the total charge capacity per unit of nominal area as compared to other carbon nanostructures.[46]

Cup-stacked carbon nanotubes (CSCNTs) differ from other quasi-1D carbon structures, which normally behave as quasi-metallic conductors of electrons. CSCNTs exhibit semiconducting behavior because of the stacking microstructure of graphene layers.[47]

## Properties

Many properties of single-walled carbon nanotubes depend significantly on the (n,m) type, and this dependence is non-monotonic (see Kataura plot). In particular, the band gap can vary from zero to about 2 eV and the electrical conductivity can show metallic or semiconducting behavior.

### Mechanical

Error creating thumbnail:

A scanning electron microscopy image of carbon nanotube bundles

Carbon nanotubes are the strongest and stiffest materials yet discovered in terms of tensile strength and elastic modulus. This strength results from the covalent sp2 bonds formed between the individual carbon atoms. In 2000, a multiwalled carbon nanotube was tested to have a tensile strength of 63 gigapascals (9,100,000 psi).[48] (For illustration, this translates into the ability to endure tension of a weight equivalent to 6,422 kilograms-force (62,980 N; 14,160 lbf) on a cable with cross-section of 1 square millimetre (0.0016 sq in)). Further studies, such as one conducted in 2008, revealed that individual CNT shells have strengths of up to ≈100 gigapascals (15,000,000 psi), which is in agreement with quantum/atomistic models.[49] Because carbon nanotubes have a low density for a solid of 1.3 to 1.4 g/cm3,[50] its specific strength of up to 48,000 kN·m·kg−1 is the best of known materials, compared to high-carbon steel's 154 kN·m·kg−1.

Although the strength of individual CNT shells is extremely high, weak shear interactions between adjacent shells and tubes lead to significant reduction in the effective strength of multiwalled carbon nanotubes and carbon nanotube bundles down to only a few GPa.[51] This limitation has been recently addressed by applying high-energy electron irradiation, which crosslinks inner shells and tubes, and effectively increases the strength of these materials to ≈60 GPa for multiwalled carbon nanotubes[49] and ≈17 GPa for double-walled carbon nanotube bundles.[51] CNTs are not nearly as strong under compression. Because of their hollow structure and high aspect ratio, they tend to undergo buckling when placed under compressive, torsional, or bending stress.[52]

On the other hand, there was evidence that in the radial direction they are rather soft. The first transmission electron microscope observation of radial elasticity suggested that even van der Waals forces can deform two adjacent nanotubes. Later, nanoindentations with an atomic force microscope were performed by several groups to quantitatively measure radial elasticity of multiwalled carbon nanotubes and tapping/contact mode atomic force microscopy was also performed on single-walled carbon nanotubes. Young's modulus of on the order of several GPa showed that CNTs are in fact very soft in the radial direction.

### Electrical

File:Carbon nanotube bands.gif

Band structures computed using tight binding approximation for (6,0) CNT (zigzag, metallic), (10,2) CNT (semiconducting) and (10,10) CNT (armchair, metallic).

Unlike graphene, which is a two-dimensional semimetal, carbon nanotubes are either metallic or semiconducting along the tubular axis. For a given (n,m) nanotube, if n = m, the nanotube is metallic; if n − m is a multiple of 3 and n ≠ m and nm ≠ 0, then the nanotube is quasi-metallic with a very small band gap, otherwise the nanotube is a moderate semiconductor.[53] Thus, all armchair (n = m) nanotubes are metallic, and nanotubes (6,4), (9,1), etc. are semiconducting.[54] Carbon nanotubes are not semimetallic because the degenerate point (the point where the π [bonding] band meets the π* [anti-bonding] band, at which the energy goes to zero) is slightly shifted away from the K point in the Brillouin zone because of the curvature of the tube surface, causing hybridization between the σ* and π* anti-bonding bands, modifying the band dispersion.

The rule regarding metallic versus semiconductor behavior has exceptions because curvature effects in small-diameter tubes can strongly influence electrical properties. Thus, a (5,0) SWCNT that should be semiconducting in fact is metallic according to the calculations. Likewise, zigzag and chiral SWCNTs with small diameters that should be metallic have a finite gap (armchair nanotubes remain metallic).[54] In theory, metallic nanotubes can carry an electric current density of 4 × 109 A/cm2, which is more than 1,000 times greater than those of metals such as copper,[55] where for copper interconnects, current densities are limited by electromigration. Carbon nanotubes are thus being explored as interconnects and conductivity-enhancing components in composite materials, and many groups are attempting to commercialize highly conducting electrical wire assembled from individual carbon nanotubes. There are significant challenges to be overcome however, such as undesired current saturation under voltage,[56] and the much more resistive nanotube-to-nanotube junctions and impurities, all of which lower the electrical conductivity of the macroscopic nanotube wires by orders of magnitude, as compared to the conductivity of the individual nanotubes.

Because of its nanoscale cross-section, electrons propagate only along the tube's axis. As a result, carbon nanotubes are frequently referred to as one-dimensional conductors. The maximum electrical conductance of a single-walled carbon nanotube is 2G0, where G0 = 2e2/h is the conductance of a single ballistic quantum channel.[57]

Because of the role of the π-electron system in determining the electronic properties of graphene, doping in carbon nanotubes differs from that of bulk crystalline semiconductors from the same group of the periodic table (e.g., silicon). Graphitic substitution of carbon atoms in the nanotube wall by boron or nitrogen dopants leads to p-type and n-type behavior, respectively, as would be expected in silicon. However, some non-substitutional (intercalated or adsorbed) dopants introduced into a carbon nanotube, such as alkali metals and electron-rich metallocenes, result in n-type conduction because they donate electrons to the π-electron system of the nanotube. By contrast, π-electron acceptors such as FeCl3 or electron-deficient metallocenes function as p-type dopants because they draw π-electrons away from the top of the valence band.

Intrinsic superconductivity has been reported,[58] although other experiments found no evidence of this, leaving the claim a subject of debate.[59]

### Optical

Main page: Optical properties of carbon nanotubesCarbon nanotubes have useful absorption, photoluminescence (fluorescence), and Raman spectroscopy properties. Spectroscopic methods offer the possibility of quick and non-destructive characterization of relatively large amounts of carbon nanotubes. There is a strong demand for such characterization from the industrial point of view: numerous parameters of nanotube synthesis can be changed, intentionally or unintentionally, to alter the nanotube quality. As shown below, optical absorption, photoluminescence, and Raman spectroscopies allow quick and reliable characterization of this "nanotube quality" in terms of non-tubular carbon content, structure (chirality) of the produced nanotubes, and structural defects. These features determine nearly any other properties such as optical, mechanical, and electrical properties.

Carbon nanotubes are unique "one-dimensional systems" which can be envisioned as rolled single sheets of graphite (or more precisely graphene). This rolling can be done at different angles and curvatures resulting in different nanotube properties. The diameter typically varies in the range 0.4–40 nm (i.e., "only" ~100 times), but the length can vary ~100,000,000,000 times, from 0.14 nm to 55.5 cm.[60] The nanotube aspect ratio, or the length-to-diameter ratio, can be as high as 132,000,000:1,[61] which is unequalled by any other material. Consequently, all the properties of the carbon nanotubes relative to those of typical semiconductors are extremely anisotropic (directionally dependent) and tunable.

Whereas mechanical, electrical, and electrochemical (supercapacitor) properties of the carbon nanotubes are well established and have immediate applications, the practical use of optical properties is yet unclear. The aforementioned tunability of properties is potentially useful in optics and photonics. In particular, light-emitting diodes (LEDs)[62][63] and photo-detectors[64] based on a single nanotube have been produced in the lab. Their unique feature is not the efficiency, which is yet relatively low, but the narrow selectivity in the wavelength of emission and detection of light and the possibility of its fine tuning through the nanotube structure. In addition, bolometer[65] and optoelectronic memory[66] devices have been realised on ensembles of single-walled carbon nanotubes.

Crystallographic defects also affect the tube's electrical properties. A common result is lowered conductivity through the defective region of the tube. A defect in armchair-type tubes (which can conduct electricity) can cause the surrounding region to become semiconducting, and single monatomic vacancies induce magnetic properties.[67]

### Thermal

All nanotubes are expected to be very good thermal conductors along the tube, exhibiting a property known as "ballistic conduction", but good insulators lateral to the tube axis. Measurements show that an individual SWNT has a room-temperature thermal conductivity along its axis of about 3500 W·m−1·K−1;[68] compare this to copper, a metal well known for its good thermal conductivity, which transmits 385 W·m−1·K−1. An individual SWNT has a room-temperature thermal conductivity lateral to its axis (in the radial direction) of about 1.52 W·m−1·K−1,[69] which is about as thermally conductive as soil. Macroscopic assemblies of nanotubes such as films or fibres have reached up to 1500 W·m−1·K−1 so far.[70] Networks composed of nanotubes demonstrate different values of thermal conductivity, from the level of thermal insulation with the thermal conductivity of 0.1 W·m−1·K−1 to such high values.[71] That is dependent on the amount of contribution to the thermal resistance of the system caused by the presence of impurities, misalignments and other factors. The temperature stability of carbon nanotubes is estimated to be up to 2800 °C in vacuum and about 750 °C in air.[72]

Crystallographic defects strongly affect the tube's thermal properties. Such defects lead to phonon scattering, which in turn increases the relaxation rate of the phonons. This reduces the mean free path and reduces the thermal conductivity of nanotube structures. Phonon transport simulations indicate that substitutional defects such as nitrogen or boron will primarily lead to scattering of high-frequency optical phonons. However, larger-scale defects such as Stone Wales defects cause phonon scattering over a wide range of frequencies, leading to a greater reduction in thermal conductivity.[73]

## Synthesis

Main page: Chemistry:Synthesis of carbon nanotubes

Techniques have been developed to produce nanotubes in sizable quantities, including arc discharge, laser ablation, chemical vapor deposition (CVD) and high-pressure carbon monoxide disproportionation (HiPCO). Among these arc discharge, laser ablation, chemical vapor deposition (CVD) are batch by batch process and HiPCO is gas phase continuous process.[74] Most of these processes take place in a vacuum or with process gases. The CVD growth method is popular, as it yields high quantity and has a degree of control over diameter, length and morphology. Using particulate catalysts, large quantities of nanotubes can be synthesized by these methods, but achieving the repeatability becomes a major problem with CVD growth.[75] The HiPCO process advances in catalysis and continuous growth are making CNTs more commercially viable.[76] The HiPCO process helps in producing high purity single walled carbon nanotubes in higher quantity. The HiPCO reactor operates at high temperature 900-1100 °C and high pressure ~30-50 bar.[77] It uses carbon monoxide as the carbon source and Iron pentacarbonyl or Nickel tetracarbonyl as a catalyst. These catalyst acts as the nucleation site for the nanotubes to grow.[74]

Vertically aligned carbon nanotube arrays are also grown by thermal chemical vapor deposition. A substrate (quartz, silicon, stainless steel, etc.) is coated with a catalytic metal (Fe, Co, Ni) layer. Typically that layer is iron, and is deposited via sputtering to a thickness of 1–5 nm. A 10–50 nm underlayer of alumina is often also put down on the substrate first. This imparts controllable wetting and good interfacial properties. When the substrate is heated to the growth temperature (~700 °C), the continuous iron film breaks up into small islands... each island then nucleates a carbon nanotube. The sputtered thickness controls the island size, and this in turn determines the nanotube diameter. Thinner iron layers drive down the diameter of the islands, and they drive down the diameter of the nanotubes grown. The amount of time that the metal island can sit at the growth temperature is limited, as they are mobile, and can merge into larger (but fewer) islands. Annealing at the growth temperature reduces the site density (number of CNT/mm2) while increasing the catalyst diameter.

The as-prepared carbon nanotubes always have impurities such as other forms of carbon (amorphous carbon, fullerene, etc.) and non-carbonaceous impurities (metal used for catalyst).[78][79] These impurities need to be removed to make use of the carbon nanotubes in applications.[80]

## Modeling

Computer simulated microstructures with agglomeration regions

Carbon nanotubes are modelled in a similar manner as traditional composites in which a reinforcement phase is surrounded by a matrix phase. Ideal models such as cylindrical, hexagonal and square models are common. The size of the micromechanics model is highly function of the studied mechanical properties. The concept of representative volume element (RVE) is used to determine the appropriate size and configuration of computer model to replicate the actual behavior of CNT reinforced nanocomposite. Depending on the material property of interest (thermal, electrical, modulus, creep), one RVE might predict the property better than the alternatives. While the implementation of ideal model is comutationally efficient, they do not represent microstructural features observed in scanning electron microscopy of actual nanocomposites. To incorporate realistic modeling, computer models are also generated to incorporate variability such as waviness, orientation and agglomeration of multiwall or single wall carbon nanotubes.[81][82]

## Metrology

There are many metrology standards and reference materials available for carbon nanotubes.[83]

For single-wall carbon nanotubes, ISO/TS 10868 describes a measurement method for the diameter, purity, and fraction of metallic nanotubes through optical absorption spectroscopy,[84] while ISO/TS 10797 and ISO/TS 10798 establish methods to characterize the morphology and elemental composition of single-wall carbon nanotubes, using transmission electron microscopy and scanning electron microscopy respectively, coupled with energy dispersive X-ray spectrometry analysis.[85][86]

NIST SRM 2483 is a soot of single-wall carbon nanotubes used as a reference material for elemental analysis, and was characterized using thermogravimetric analysis, prompt gamma activation analysis, induced neutron activation analysis, inductively coupled plasma mass spectroscopy, resonant Raman scattering, UV-visible-near infrared fluorescence spectroscopy and absorption spectroscopy, scanning electron microscopy, and transmission electron microscopy.[87][88] The Canadian National Research Council also offers a certified reference material SWCNT-1 for elemental analysis using neutron activation analysis and inductively coupled plasma mass spectroscopy.[83][89] NIST RM 8281 is a mixture of three lengths of single-wall carbon nanotube.[87][90]

For multiwall carbon nanotubes, ISO/TR 10929 identifies the basic properties and the content of impurities,[91] while ISO/TS 11888 describes morphology using scanning electron microscopy, transmission electron microscopy, viscometry, and light scattering analysis.[92] ISO/TS 10798 is also valid for multiwall carbon nanotubes.[86]

## Chemical modification

Carbon nanotubes can be functionalized to attain desired properties that can be used in a wide variety of applications. The two main methods of carbon nanotube functionalization are covalent and non-covalent modifications. Because of their apparent hydrophobic nature,[93] carbon nanotubes tend to agglomerate hindering their dispersion in solvents or viscous polymer melts. The resulting nanotube bundles or aggregates reduce the mechanical performance of the final composite. The surface of the carbon nanotubes can be modified to reduce the hydrophobicity and improve interfacial adhesion to a bulk polymer through chemical attachment.[94]

Also surface of carbon nanotubes can be fluorinated or halofluorinated by CVD-method with fluorocarbons, hydro- or halofluorocarbons by heating while in contact of such carbon material with fluoroorganic substance to form partially fluorinated carbons (so called Fluocar materials) with grafted (halo)fluoroalkyl functionality.[95][96]

## Applications

A primary obstacle for applications of carbon nanotubes has been their cost. Prices for single-walled nanotubes declined from around $1500 per gram as of 2000 to retail prices of around $50 per gram of as-produced 40–60% by weight SWNTs as of March 2010. As of 2016, the retail price of as-produced 75% by weight SWNTs was $2 per gram.[97] SWNTs are forecast to make a large impact in electronics applications by 2020 according to The Global Market for Carbon Nanotubes report.

### Current

Current use and application of nanotubes has mostly been limited to the use of bulk nanotubes, which is a mass of rather unorganized fragments of nanotubes. Bulk nanotube materials may never achieve a tensile strength similar to that of individual tubes, but such composites may, nevertheless, yield strengths sufficient for many applications. Bulk carbon nanotubes have already been used as composite fibers in polymers to improve the mechanical, thermal and electrical properties of the bulk product.

* Easton-Bell Sports, Inc. have been in partnership with Zyvex Performance Materials, using CNT technology in a number of their bicycle components – including flat and riser handlebars, cranks, forks, seatposts, stems and aero bars.
* Amroy Europe Oy manufactures Hybtonite carbon nanoepoxy resins where carbon nanotubes have been chemically activated to bond to epoxy, resulting in a composite material that is 20% to 30% stronger than other composite materials. It has been used for wind turbines, marine paints and a variety of sports gear such as skis, ice hockey sticks, baseball bats, hunting arrows, and surfboards.[98]
* Surrey NanoSystems synthesises carbon nanotubes to create vantablack.

Other current applications include:

* tips for atomic force microscope probes[99]
* in tissue engineering, carbon nanotubes can act as scaffolding for bone growth[100]

### Under development

Current research for modern applications include:

* Utilizing carbon nanotubes as the channel material of carbon nanotube field-effect transistors.[101]
* Using carbon nanotubes as a scaffold for diverse microfabrication techniques.[102]
* Energy dissipation in self-organized nanostructures under influence of an electric field.[103]
* Using carbon nanotubes for environmental monitoring due to their active surface area and their ability to absorb gases.[104]
* Jack Andraka used carbon nanotubes in his pancreatic cancer test. His method of testing won the Intel International Science and Engineering Fair Gordon E. Moore Award in the spring of 2012.Jack Andraka, the Teen Prodigy of Pancreatic Cancer
* The Boeing Company has patented the use of carbon nanotubes for structural health monitoring[105] of composites used in aircraft structures. This technology will greatly reduce the risk of an in-flight failure caused by structural degradation of aircraft.
* Zyvex Technologies has also built a 54' maritime vessel, the Piranha Unmanned Surface Vessel, as a technology demonstrator for what is possible using CNT technology. CNTs help improve the structural performance of the vessel, resulting in a lightweight 8,000 lb boat that can carry a payload of 15,000 lb over a range of 2,500 miles.[106]

Carbon nanotubes can serve as additives to various structural materials. For instance, nanotubes form a tiny portion of the material(s) in some (primarily carbon fiber) baseball bats, golf clubs, car parts, or damascus steel.[107][108]

IBM expected carbon nanotube transistors to be used on Integrated Circuits by 2020.[109]

### Potential

Main page: Engineering:Potential applications of carbon nanotubes

The strength and flexibility of carbon nanotubes makes them of potential use in controlling other nanoscale structures, which suggests they will have an important role in nanotechnology engineering. The highest tensile strength of an individual multi-walled carbon nanotube has been tested to be 63 GPa.[48] Carbon nanotubes were found in Damascus steel from the 17th century, possibly helping to account for the legendary strength of the swords made of it.[110][111] Recently, several studies have highlighted the prospect of using carbon nanotubes as building blocks to fabricate three-dimensional macroscopic (>1mm in all three dimensions) all-carbon devices. Lalwani et al. have reported a novel radical initiated thermal crosslinking method to fabricated macroscopic, free-standing, porous, all-carbon scaffolds using single- and multi-walled carbon nanotubes as building blocks.[35] These scaffolds possess macro-, micro-, and nano- structured pores and the porosity can be tailored for specific applications. These 3D all-carbon scaffolds/architectures may be used for the fabrication of the next generation of energy storage, supercapacitors, field emission transistors, high-performance catalysis,[112] photovoltaics, and biomedical devices and implants.

CNTs are potential candidates for future via and wire material in nano-scale VLSI circuits. Eliminating electromigration reliability concerns that plague today's Cu interconnects, isolated (single and multi-wall) CNTs can carry current densities in excess of 1000 MA/cm2 without electromigration damage.[113]

Single-walled nanotubes are likely candidates for miniaturizing electronics. The most basic building block of these systems is an electric wire, and SWNTs with diameters of an order of a nanometer can be excellent conductors.[114][115] One useful application of SWNTs is in the development of the first intermolecular field-effect transistors (FET). The first intermolecular logic gate using SWCNT FETs was made in 2001.[116] A logic gate requires both a p-FET and an n-FET. Because SWNTs are p-FETs when exposed to oxygen and n-FETs otherwise, it is possible to expose half of an SWNT to oxygen and protect the other half from it. The resulting SWNT acts as a not logic gate with both p- and n-type FETs in the same molecule. Large quantities of pure CNTs can be made into a freestanding sheet or film by surface-engineered tape-casting (SETC) fabrication technique which is a scalable method to fabricate flexible and foldable sheets with superior properties.[117][118] Another reported form factor is CNT fiber (a.k.a. filament) by wet spinning.[119] The fiber is either directly spun from the synthesis pot or spun from pre-made dissolved CNTs. Individual fibers can be turned into a yarn. Apart from its strength and flexibility, the main advantage is making an electrically conducting yarn. The electronic properties of individual CNT fibers (i.e. bundle of individual CNT) are governed by the two-dimensional structure of CNTs. The fibers were measured to have a resistivity only one order of magnitude higher than metallic conductors at 300K. By further optimizing the CNTs and CNT fibers, CNT fibers with improved electrical properties could be developed.[113][120]

CNT-based yarns are suitable for applications in energy and electrochemical water treatment when coated with an ion-exchange membrane.[121] Also, CNT-based yarns could replace copper as a winding material. Pyrhönen et al. (2015) have built a motor using CNT winding.[122][123]

## Safety and health

The National Institute for Occupational Safety and Health (NIOSH) is the leading United States federal agency conducting research and providing guidance on the occupational safety and health implications and applications of nanotechnology. Early scientific studies have indicated that some of these nanoscale particles may pose a greater health risk than the larger bulk form of these materials. In 2013, NIOSH published a Current Intelligence Bulletin detailing the potential hazards and recommended exposure limit for carbon nanotubes and fibers.[124]

As of October 2016, single wall carbon nanotubes have been registered through the European Union's Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulations, based on evaluation of the potentially hazardous properties of SWCNT. Based on this registration, SWCNT commercialization is allowed in the EU up to 10 metric tons. Currently, the type of SWCNT registered through REACH is limited to the specific type of single wall carbon nanotubes manufactured by OCSiAl, which submitted the application.[125]

## History

The true identity of the discoverers of carbon nanotubes is a subject of some controversy.[126] A 2006 editorial written by Marc Monthioux and Vladimir Kuznetsov in the journal Carbon described the interesting and often-misstated origin of the carbon nanotube.[4] A large percentage of academic and popular literature attributes the discovery of hollow, nanometer-size tubes composed of graphitic carbon to Sumio Iijima of NEC in 1991. He published a paper describing his discovery which initiated a flurry of excitement and could be credited by inspiring the many scientists now studying applications of carbon nanotubes. Though Iijima has been given much of the credit for discovering carbon nanotubes, it turns out that the timeline of carbon nanotubes goes back much further than 1991.[126]

In 1952, L. V. Radushkevich and V. M. Lukyanovich published clear images of 50 nanometer diameter tubes made of carbon in the Soviet Journal of Physical Chemistry.[3] This discovery was largely unnoticed, as the article was published in Russian, and Western scientists' access to Soviet press was limited during the Cold War. Monthioux and Kuznetsov mentioned in their Carbon editorial:[4]

> The fact is, Radushkevich and Lukyanovich [..] should be credited for the discovery that carbon filaments could be hollow and have a nanometer- size diameter, that is to say for the discovery of carbon nanotubes.

In 1976, Morinobu Endo of CNRS observed hollow tubes of rolled up graphite sheets synthesised by a chemical vapour-growth technique.[2] The first specimens observed would later come to be known as single-walled carbon nanotubes (SWNTs).[127] Endo, in his early review of vapor-phase-grown carbon fibers (VPCF), also reminded us that he had observed a hollow tube, linearly extended with parallel carbon layer faces near the fiber core.[128] This appears to be the observation of multi-walled carbon nanotubes at the center of the fiber.[127] The mass-produced MWCNTs today are strongly related to the VPGCF developed by Endo.[127] In fact, they call it the "Endo-process", out of respect for his early work and patents.[127][129]

In 1979, John Abrahamson presented evidence of carbon nanotubes at the 14th Biennial Conference of Carbon at Pennsylvania State University. The conference paper described carbon nanotubes as carbon fibers that were produced on carbon anodes during arc discharge. A characterization of these fibers was given as well as hypotheses for their growth in a nitrogen atmosphere at low pressures.[130]

In 1981, a group of Soviet scientists published the results of chemical and structural characterization of carbon nanoparticles produced by a thermocatalytical disproportionation of carbon monoxide. Using TEM images and XRD patterns, the authors suggested that their "carbon multi-layer tubular crystals" were formed by rolling graphene layers into cylinders. They speculated that by rolling graphene layers into a cylinder, many different arrangements of graphene hexagonal nets are possible. They suggested two possibilities of such arrangements: circular arrangement (armchair nanotube) and a spiral, helical arrangement (chiral tube).[131]

In 1987, Howard G. Tennent of Hyperion Catalysis was issued a U.S. patent for the production of "cylindrical discrete carbon fibrils" with a "constant diameter between about 3.5 and about 70 nanometers..., length 102 times the diameter, and an outer region of multiple essentially continuous layers of ordered carbon atoms and a distinct inner core...."[132]

Iijima's discovery of multi-walled carbon nanotubes in the insoluble material of arc-burned graphite rods in 1991[1] and Mintmire, Dunlap, and White's independent prediction that if single-walled carbon nanotubes could be made, then they would exhibit remarkable conducting properties[7] helped create the initial excitement associated with carbon nanotubes. Nanotube research accelerated greatly following the independent discoveries[13][14] by Iijima and Ichihashi at NEC and Bethune et al. at IBM of single-walled carbon nanotubes and methods to specifically produce them by adding transition-metal catalysts to the carbon in an arc discharge. The arc discharge technique was well known to produce the famed Buckminster fullerene on a preparative scale,[133] and these results appeared to extend the run of accidental discoveries relating to fullerenes. The discovery of nanotubes remains a contentious issue. Many believe that Iijima's report in 1991 is of particular importance because it brought carbon nanotubes into the awareness of the scientific community as a whole.[126][127]

## See also

## References

This article incorporates public domain text from National Institute of Environmental Health Sciences (NIEHS) as quoted.

1. ↑ 1.0 1.1 1.2 1.3 Iijima, Sumio (7 November 1991). "Helical microtubules of graphitic carbon". Nature 354 (6348): 56–58. doi:10.1038/354056a0. Bibcode: 1991Natur.354...56I.
2. ↑ 2.0 2.1 2.2 Oberlin, A.; Endo, M.; Koyama, T. (1976). "Filamentous growth of carbon through benzene decomposition". Journal of Crystal Growth 32 (3): 335–349. doi:10.1016/0022-0248(76)90115-9. Bibcode: 1976JCrGr..32..335O. http://www.kroto.info/wp-content/uploads/2015/10/1.M.ENdoJCrystalGrowth1976.pdf.
3. ↑ 3.0 3.1 3.2 Радушкевич, Л. В. (1952). "Archived copy" (in Russian). Журнал Физической Химии 26: 88–95. http://nanotube.msu.edu/HSS/2006/4/2006-4.pdf. Retrieved 5 April 2012.
4. ↑ 4.0 4.1 4.2 4.3 4.4 Monthioux, Marc; Kuznetsov, V (2006). "Who should be given the credit for the discovery of carbon nanotubes?". Carbon 44 (9): 1621–1623. doi:10.1016/j.carbon.2006.03.019. http://nanotube.msu.edu/HSS/2006/1/2006-1.pdf. Retrieved 1 March 2017.
5. ↑ 5.0 5.1 Zhang, R.; Zhang, Y.; Zhang, Q.; Xie, H.; Qian, W.; Wei, F. (2013). "Growth of Half-Meter Long Carbon Nanotubes Based on Schulz–Flory Distribution". ACS Nano 7 (7): 6156–6161. doi:10.1021/nn401995z. PMID 23806050. https://figshare.com/articles/Growth_of_Half_Meter_Long_Carbon_Nanotubes_Based_on_Schulz_Flory_Distribution/2393992.
6. ↑ 6.0 6.1 6.2 Hamada, N.; Sawada, S.; Oshiyama, A. (1992). "New one-dimensional conductors: graphitic microtubules". Phys. Rev. Lett. 68 (10): 1579–1581. doi:10.1103/PhysRevLett.68.1579. PMID 10045167. Bibcode: 1992PhRvL..68.1579H.
7. ↑ 7.0 7.1 7.2 Mintmire, J.W.; Dunlap, B.I.; White, C.T. (1992). "Are fullerene tubules metallic?". Phys. Rev. Lett. 68 (5): 631–634. doi:10.1103/PhysRevLett.68.631. PMID 10045950. Bibcode: 1992PhRvL..68..631M.
8. ↑ Tans, S.J.; Devoret, M.H.; Dai., H.; Thess, A.; Smalley, R.E.; Geerligs, L.J.; Dekker, C. (1997). "Individual single-wall carbon nanotubes as quantum wires". Nature 386 (6624): 374–377. doi:10.1038/386474a0. Bibcode: 1997Natur.386..474T. http://resolver.tudelft.nl/uuid:4e58e2bc-5f69-4dbe-9942-aabcc9eaad35.
9. ↑ Yu, M.-F; Lourie, O.; Dyer, M.J.; Moloni, K.; Kelley, T.F.; Ruoff, R.S. (2000). "Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load". Science 287 (5453): 637–40. doi:10.1126/science.287.5453.637. PMID 10649994. Bibcode: 2000Sci...287..637Y.
10. ↑ Bever, S.; Kwon, Y.-K.; Tomanek, D. (2000). "Unusually high thermal conductivity of carbon nanotubes". Phys. Rev. Lett. 84 (20): 4613–4616. doi:10.1103/PhysRevLett.84.4613. PMID 10990753. Bibcode: 2000PhRvL..84.4613B.
11. ↑ Kim, P.; Shi, L.; Majumdar, A.; McEuen, P.L. (2001). "Thermal transport measurements of individual multi walled nanotubes". Phys. Rev. Lett. 87 (21): 215502. doi:10.1103/PhysRevLett.87.215502. PMID 11736348. Bibcode: 2001PhRvL..87u5502K.
12. ↑ Karousis, Nikolaos; Tagmatarchis, Nikos; Tasis, Dimitrios (2010-06-14). "Current progress on the chemical modification of carbon nanotubes". Chemical Reviews 110 (9): 5366–5397. doi:10.1021/cr100018g. PMID 20545303.
13. ↑ 13.0 13.1 Iijima, Sumio; Ichihashi, Toshinari (1993). "Single-shell carbon nanotubes of 1-nm diameter". Nature 363 (6430): 603–605. doi:10.1038/363603a0. Bibcode: 1993Natur.363..603I.
14. ↑ 14.0 14.1 Bethune, D. S.; Kiang, C. H.; De Vries, M. S.; Gorman, G.; Savoy, R.; Vazquez, J.; Beyers, R. (1993). "Cobalt-catalyzed growth of carbon nanotubes with single-atomic-layer walls". Nature 363 (6430): 605–607. doi:10.1038/363605a0. Bibcode: 1993Natur.363..605B.
15. ↑ 15.0 15.1 S. B. Sinnott; R. Andreys (2001). "Carbon Nanotubes: Synthesis, Properties, and Applications". Critical Reviews in Solid State and Materials Sciences 26 (3): 145–249. doi:10.1080/20014091104189. Bibcode: 2001CRSSM..26..145S.
16. ↑ Zhao, X.; Liu, Y.; Inoue, S.; Suzuki, T.; Jones, R.; Ando, Y. (2004). "Smallest Carbon Nanotube is 3 Å in Diameter". Phys. Rev. Lett. 92 (12): 125502. doi:10.1103/PhysRevLett.92.125502. PMID 15089683. Bibcode: 2004PhRvL..92l5502Z. http://juser.fz-juelich.de/record/38262/files/48588.pdf.
17. ↑ Torres-Dias, Abraao C. (2017). "From mesoscale to nanoscale mechanics in single-wall carbon nanotubes". Carbon 123: 145–150. doi:10.1016/j.carbon.2017.07.036. http://qmro.qmul.ac.uk/xmlui/handle/123456789/25311.
18. ↑ Hayashi, Takuya; Kim, Yoong Ahm; Matoba, Toshiharu; Esaka, Masaya; Nishimura, Kunio; Tsukada, Takayuki; Endo, Morinobu; Dresselhaus, Mildred S. (2003). "Smallest Freestanding Single-Walled Carbon Nanotube". Nano Letters 3 (7): 887–889. doi:10.1021/nl034080r. Bibcode: 2003NanoL...3..887H.
19. ↑ Guan, L.; Suenaga, K.; Iijima, S. (2008). "Smallest Carbon Nanotube Assigned with Atomic Resolution Accuracy". Nano Letters 8 (2): 459–462. doi:10.1021/nl072396j. PMID 18186659. Bibcode: 2008NanoL...8..459G.
20. ↑ Wang, X.; Li, Qunqing; Xie, Jing; Jin, Zhong; Wang, Jinyong; Li, Yan; Jiang, Kaili; Fan, Shoushan (2009). "Fabrication of Ultralong and Electrically Uniform Single-Walled Carbon Nanotubes on Clean Substrates". Nano Letters 9 (9): 3137–3141. doi:10.1021/nl901260b. PMID 19650638. Bibcode: 2009NanoL...9.3137W.
21. ↑ Jasti, Ramesh; Bhattacharjee, Joydeep; Neaton, Jeffrey B; Bertozzi, Carolyn R (4 December 2008). "Synthesis, Characterization, and Theory of [9-, [12]-, and [18]Cycloparaphenylene: Carbon Nanohoop Structures"]. Journal of the American Chemical Society 130 (52): 17646–17647. doi:10.1021/ja807126u. PMID 19055403.
22. ↑ "Densest array of carbon nanotubes grown to date". KurzweilAI. 27 September 2013. http://www.kurzweilai.net/densest-array-of-carbon-nanotubes-grown-to-date.
23. ↑ Sugime, H.; Esconjauregui, S.; Yang, J.; d'Arsié, L.; Oliver, R. A.; Bhardwaj, S.; Cepek, C.; Robertson, J. (2013). "Low temperature growth of ultra-high mass density carbon nanotube forests on conductive supports". Applied Physics Letters 103 (7): 073116. doi:10.1063/1.4818619. Bibcode: 2013ApPhL.103g3116S.
24. ↑ Das, S. (2013). "A review on Carbon nano-tubes – A new era of nanotechnology". International Journal of Emerging Technology and Advanced Engineering 3 (3): 774–781. ISSN 2250-2459.
25. ↑ Flahaut, E.; Bacsa, Revathi; Peigney, Alain; Laurent, Christophe (2003). "Gram-Scale CCVD Synthesis of Double-Walled Carbon Nanotubes". Chemical Communications 12 (12): 1442–1443. doi:10.1039/b301514a. PMID 12841282. http://hal.archives-ouvertes.fr/hal-00926035.
26. ↑ Cumings, J.; Zettl, A. (2000). "Low-Friction Nanoscale Linear Bearing Realized from Multiwall Carbon Nanotubes". Science 289 (5479): 602–604. doi:10.1126/science.289.5479.602. PMID 10915618. Bibcode: 2000Sci...289..602C.
27. ↑ Treacy, M.M.J.; Ebbesen, T.W.; Gibson, J.M. (1996). "Exceptionally high Young's modulus observed for individual carbon nanotubes". Nature 381 (6584): 678–680. doi:10.1038/381678a0. Bibcode: 1996Natur.381..678T.
28. ↑ Zavalniuk, V.; Marchenko, S. (2011). "Theoretical analysis of telescopic oscillations in multi-walled carbon nanotubes". Low Temperature Physics 37 (4): 337–342. doi:10.1063/1.3592692. Bibcode: 2011LTP....37..337Z. http://dspace.nbuv.gov.ua/xmlui/bitstream/123456789/118539/1/12-Zavalniuk.pdf.
29. ↑ Chernozatonskii, L.A. (1992). "Carbon nanotube connectors and planar jungle gyms". Physics Letters A 172 (3): 173–176. doi:10.1016/0375-9601(92)90978-u. Bibcode: 1992PhLA..172..173C.
30. ↑ Menon, M. (1997). "Carbon Nanotube "T Junctions": Nanoscale Metal-Semiconductor-Metal Contact Devices". Physical Review Letters 79 (22): 4453–4456. doi:10.1103/physrevlett.79.4453. Bibcode: 1997PhRvL..79.4453M.
31. ↑ Lambin, P. (1996). "Atomic structure and electronic properties of bent carbon nanotubes". Synth. Met. 77 (1–3): 249–1254. doi:10.1016/0379-6779(96)80097-x.
32. ↑ Ma, K.L. (2011). "Electronic transport properties of junctions between carbon nanotubes and graphene nanoribbons". European Physical Journal B 83 (4): 487–492. doi:10.1140/epjb/e2011-20313-9. Bibcode: 2011EPJB...83..487M.
33. ↑ Harris, P.J.F. (2016). "The structure of junctions between carbon nanotubes and graphene shells". Nanoscale 8 (45): 18849–18854. doi:10.1039/c6nr06461b. PMID 27808332. http://centaur.reading.ac.uk/67327/1/NANOSCALE FOR CENTAUR.pdf.
34. ↑ Dimitrakakis, G. K. (2008). "Pillared graphene: a new 3-D network nanostructure for enhanced hydrogen storage". Nano Lett. 8 (10): 3166–3170. doi:10.1021/nl801417w. PMID 18800853. Bibcode: 2008NanoL...8.3166D.
35. ↑ 35.0 35.1 Balaji Sitharaman., Lalwani, Gaurav, Andrea Trinward Kwaczala, Shruti Kanakia, Sunny C. Patel, Stefan Judex (2013). "Fabrication and characterization of three-dimensional macroscopic all-carbon scaffolds". Carbon 53: 90–100. doi:10.1016/j.carbon.2012.10.035. PMID 23436939.
36. ↑ Balaji Sitharaman., Lalwani, Gaurav, Anu Gopalan, Michael D'Agati, Jeyantt Srinivas Sankaran, Stefan Judex, Yi-Xian Qin (2015). "Porous three-dimensional carbon nanotube scaffolds for tissue engineering". Journal of Biomedical Materials Research Part A 103 (10): 3212–3225. doi:10.1002/jbm.a.35449. PMID 25788440.
37. ↑ Noyce, Steven G.; Vanfleet, Richard R.; Craighead, Harold G.; Davis, Robert C. (1999-02-22). "High surface-area carbon microcantilevers". Nanoscale Advances 1 (3): 1148–1154. doi:10.1039/C8NA00101D. https://pubs.rsc.org/en/content/articlehtml/2019/na/c8na00101d. Retrieved 2019-05-29.
38. ↑ Nasibulin, Albert G. et al. (2007). "A novel hybrid carbon material". Nature Nanotechnology 2 (3): 156–161. doi:10.1038/nnano.2007.37. PMID 18654245. Bibcode: 2007NatNa...2..156N. http://tfy.tkk.fi/nanomat/PDF publications/nnano.2007.37.print.pdf. Retrieved 10 October 2016.
39. ↑ Smith, Brian W.; Monthioux, Marc; Luzzi, David E. (1998). "Encapsulated C-60 in carbon nanotubes". Nature 396 (6709): 323–324. doi:10.1038/24521. Bibcode: 1998Natur.396R.323S.
40. ↑ Smith, B.W.; Luzzi, D.E. (2000). "Formation mechanism of fullerene peapods and coaxial tubes: a path to large scale synthesis". Chem. Phys. Lett. 321 (1–2): 169–174. doi:10.1016/S0009-2614(00)00307-9. Bibcode: 2000CPL...321..169S.
41. ↑ Su, H.; Goddard, W.A.; Zhao, Y. (2006). "Dynamic friction force in a carbon peapod oscillator". Nanotechnology 17 (22): 5691–5695. doi:10.1088/0957-4484/17/22/026. Bibcode: 2006Nanot..17.5691S. https://authors.library.caltech.edu/6289/1/SUHnanotech06.pdf.
42. ↑ Wang, M.; Li, C.M. (2010). "An oscillator in a carbon peapod controllable by an external electric field: A molecular dynamics study". Nanotechnology 21 (3): 035704. doi:10.1088/0957-4484/21/3/035704. PMID 19966399. Bibcode: 2010Nanot..21c5704W.
43. ↑ 43.0 43.1 Liu, L.; Guo, G.; Jayanthi, C.; Wu, S. (2002). "Colossal Paramagnetic Moments in Metallic Carbon Nanotori". Phys. Rev. Lett. 88 (21): 217206. doi:10.1103/PhysRevLett.88.217206. PMID 12059501. Bibcode: 2002PhRvL..88u7206L. http://ntur.lib.ntu.edu.tw/handle/246246/163841.
44. ↑ Huhtala, M.; Kuronen, A.; Kaski, K. (2002). "Carbon nanotube structures: Molecular dynamics simulation at realistic limit". Computer Physics Communications 146 (1): 30–37. doi:10.1016/S0010-4655(02)00432-0. Bibcode: 2002CoPhC.146...30H. Archived from the original on 27 June 2008. https://web.archive.org/web/20080627183309/http://www.princeton.edu/~msammalk/publications/cpc146_02.pdf.
45. ↑ Parker, Charles B.; Akshay S. Raut; Billyde Brown; Brian R. Stoner; Jeffrey T. Glass (2012). "Three-dimensional arrays of graphenated carbon nanotubes". J. Mater. Res.. 7 27 (7): 1046–1053. doi:10.1557/jmr.2012.43. Bibcode: 2012JMatR..27.1046P.
46. ↑ Stoner, Brian R.; Jeffrey T. Glass (2012). "Carbon nanostructures: a morphological classification for charge density optimization". Diamond and Related Materials 23: 130–134. doi:10.1016/j.diamond.2012.01.034. Bibcode: 2012DRM....23..130S.
47. ↑ Liu, Q.; Ren, Wencai; Chen, Zhi-Gang; Yin, Lichang; Li, Feng; Cong, Hongtao; Cheng, Hui-Ming (2009). "Semiconducting properties of cup-stacked carbon nanotubes". Carbon 47 (3): 731–736. doi:10.1016/j.carbon.2008.11.005. Archived from the original on 2015-01-09. https://web.archive.org/web/20150109002837/http://carbon.imr.ac.cn/file/Journal/2009/1249016438117.pdf.
48. ↑ 48.0 48.1 Yu, M.-F.; Lourie, O; Dyer, MJ; Moloni, K; Kelly, TF; Ruoff, RS (2000). "Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load". Science 287 (5453): 637–640. doi:10.1126/science.287.5453.637. PMID 10649994. Bibcode: 2000Sci...287..637Y.
49. ↑ 49.0 49.1 Peng, B.; Locascio, Mark; Zapol, Peter; Li, Shuyou; Mielke, Steven L.; Schatz, George C.; Espinosa, Horacio D. (2008). "Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements". Nature Nanotechnology 3 (10): 626–631. doi:10.1038/nnano.2008.211. PMID 18839003.
50. ↑ Collins, P.G. (2000). "Nanotubes for Electronics". Scientific American 283 (6): 67–69. doi:10.1038/scientificamerican1200-62. PMID 11103460. Bibcode: 2000SciAm.283f..62C.
51. ↑ 51.0 51.1 Filleter, T.; Bernal, R.; Li, S.; Espinosa, H.D. (2011). "Ultrahigh Strength and Stiffness in Cross-Linked Hierarchical Carbon Nanotube Bundles". Advanced Materials 23 (25): 2855–2860. doi:10.1002/adma.201100547. PMID 21538593.
52. ↑ Jensen, K.; Mickelson, W.; Kis, A.; Zettl, A. (2007). "Buckling and kinking force measurements on individual multiwalled carbon nanotubes". Physical Review B 76 (19): 195436. doi:10.1103/PhysRevB.76.195436. Bibcode: 2007PhRvB..76s5436J.
53. ↑ Laird, Edward A.; Kuemmeth, Ferdinand; Steele, Gary A.; Grove-Rasmussen, Kasper; Nygård, Jesper; Flensberg, Karsten; Kouwenhoven, Leo P. (2015). "Quantum Transport in Carbon Nanotubes". Reviews of Modern Physics 87 (3): 703–764. doi:10.1103/RevModPhys.87.703. Bibcode: 2015RvMP...87..703L. https://repository.tudelft.nl/islandora/object/uuid:6a686f0b-1314-42ad-b6c1-7f3cc5edddb8/datastream/OBJ/download.
54. ↑ 54.0 54.1 Lu, X.; Chen, Z. (2005). "Curved Pi-Conjugation, Aromaticity, and the Related Chemistry of Small Fullerenes (C60) and Single-Walled Carbon Nanotubes". Chemical Reviews 105 (10): 3643–3696. doi:10.1021/cr030093d. PMID 16218563.
55. ↑ Hong, Seunghun; Myung, S (2007). "Nanotube Electronics: A flexible approach to mobility". Nature Nanotechnology 2 (4): 207–208. doi:10.1038/nnano.2007.89. PMID 18654263. Bibcode: 2007NatNa...2..207H.
56. ↑ Vasylenko, Andrij; Wynn, Jamie; Medeiros, Paulo V. C.; Morris, Andrew J.; Sloan, Jeremy; Quigley, David (2017). "Encapsulated nanowires: Boosting electronic transport in carbon nanotubes". Physical Review B 95 (12): 121408. doi:10.1103/PhysRevB.95.121408. Bibcode: 2017PhRvB..95l1408V.
57. ↑ Charlier, J. C.; Blase, X.; Roche, S. (2007). "Electronic and transport properties of nanotubes". Reviews of Modern Physics 79 (2): 677–732. doi:10.1103/RevModPhys.79.677. Bibcode: 2007RvMP...79..677C.
58. ↑ Tang, Z. K.; Zhang, L; Wang, N; Zhang, XX; Wen, GH; Li, GD; Wang, JN; Chan, CT et al. (2001). "Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes". Science 292 (5526): 2462–2465. doi:10.1126/science.1060470. PMID 11431560. Bibcode: 2001Sci...292.2462T.
Takesue, I.; Haruyama, J.; Kobayashi, N.; Chiashi, S.; Maruyama, S.; Sugai, T.; Shinohara, H. (2006). "Superconductivity in Entirely End-Bonded Multiwalled Carbon Nanotubes". Phys. Rev. Lett. 96 (5): 057001. doi:10.1103/PhysRevLett.96.057001. PMID 16486971. Bibcode: 2006PhRvL..96e7001T. http://www.ee.aoyama.ac.jp/Labs/j-haru-www/paper/Haruyama SuperCNT PRL publication.pdf.
Lortz, R.; Zhang, Q; Shi, W; Ye, J. T.; Qiu, C. Y.; Wang, Z.; He, H. T.; Sheng, P et al. (2009). "Superconducting characteristics of 4-A carbon nanotube–zeolite composite". Proceedings of the National Academy of Sciences 106 (18): 7299–7303. doi:10.1073/pnas.0813162106. PMID 19369206. Bibcode: 2009PNAS..106.7299L.
59. ↑ Bockrath, M. (2006). "Carbon nanotubes: The weakest link". Nature Physics 2 (3): 155–156. doi:10.1038/nphys252. Bibcode: 2006NatPh...2..155B.
60. ↑ Zhang, R.; Zhang, Y.; Zhang, Q.; Xie, H.; Qian, W.; Wei, F. (2013). "Growth of Half-Meter Long Carbon Nanotubes Based on Schulz–Flory Distribution". ACS Nano 7 (7): 6156–6161. doi:10.1021/nn401995z. PMID 23806050. https://figshare.com/articles/Growth_of_Half_Meter_Long_Carbon_Nanotubes_Based_on_Schulz_Flory_Distribution/2393992.
61. ↑ Xueshen Wang (2009). "Fabrication of Ultralong and Electrically Uniform Single-Walled Carbon Nanotubes on Clean Substrates". Nano Letters 9 (9): 3137–3141. doi:10.1021/nl901260b. PMID 19650638. Bibcode: 2009NanoL...9.3137W. http://www.chem.pku.edu.cn/page/liy/labhomepage/publications/2009/2009NL.pdf. Retrieved 24 October 2017.
62. ↑ J. A. Misewich (2003). "Electrically Induced Optical Emission from a Carbon Nanotube FET". Science 300 (5620): 783–786. doi:10.1126/science.1081294. PMID 12730598. Bibcode: 2003Sci...300..783M.
63. ↑ J. Chen (2005). "Bright Infrared Emission from Electrically Induced Excitons in Carbon Nanotubes". Science 310 (5751): 1171–1174. doi:10.1126/science.1119177. PMID 16293757. Bibcode: 2005Sci...310.1171C.
64. ↑ M. Freitag (2003). "Photoconductivity of Single Carbon Nanotubes". Nano Letters 3 (8): 1067–1071. doi:10.1021/nl034313e. Bibcode: 2003NanoL...3.1067F.
65. ↑ M. E. Itkis (2006). "Bolometric Infrared Photoresponse of Suspended Single-Walled Carbon Nanotube Films". Science 312 (5772): 413–416. doi:10.1126/science.1125695. PMID 16627739. Bibcode: 2006Sci...312..413I.
66. ↑ A. Star (2004). "Nanotube Optoelectronic Memory Devices". Nano Letters 4 (9): 1587–1591. doi:10.1021/nl049337f. Bibcode: 2004NanoL...4.1587S. https://figshare.com/articles/Nanotube_Optoelectronic_Memory_Devices/3325894.
67. ↑ Carbon-Based Magnetism: An Overview of the Magnetism of Metal Free Carbon-based Compounds and Materials, Tatiana Makarova and Fernando Palacio (eds.), Elsevier, 2006
68. ↑ Pop, Eric; Mann, David; Wang, Qian; Goodson, Kenneth; Dai, Hongjie (22 December 2005). "Thermal conductance of an individual single-wall carbon nanotube above room temperature". Nano Letters 6 (1): 96–100. doi:10.1021/nl052145f. PMID 16402794. Bibcode: 2006NanoL...6...96P.
69. ↑ Sinha, Saion; Barjami, Saimir; Iannacchione, Germano; Schwab, Alexander; Muench, George (5 June 2005). "Off-axis thermal properties of carbon nanotube films". Journal of Nanoparticle Research 7 (6): 651–657. doi:10.1007/s11051-005-8382-9. Bibcode: 2005JNR.....7..651S.
70. ↑ Koziol, Krzysztof K.; Janas, Dawid; Brown, Elisabetta; Hao, Ling (2017-04-01). "Thermal properties of continuously spun carbon nanotube fibres". Physica E: Low-dimensional Systems and Nanostructures 88: 104–108. doi:10.1016/j.physe.2016.12.011. Bibcode: 2017PhyE...88..104K.
71. ↑ Kumanek, Bogumiła; Janas, Dawid (May 2019). "Thermal conductivity of carbon nanotube networks: a review". Journal of Materials Science 54 (10): 7397–7427. doi:10.1007/s10853-019-03368-0. ISSN 0022-2461. Bibcode: 2019JMatS..54.7397K.
72. ↑ Thostenson, Erik; Li, C; Chou, T (2005). "Nanocomposites in context". Composites Science and Technology 65 (3–4): 491–516. doi:10.1016/j.compscitech.2004.11.003.
73. ↑ Mingo, N.; Stewart, D. A.; Broido, D. A.; Srivastava, D. (2008). "Phonon transmission through defects in carbon nanotubes from first principles". Phys. Rev. B 77 (3): 033418. doi:10.1103/PhysRevB.77.033418. Bibcode: 2008PhRvB..77c3418M. http://ecommons.cornell.edu/bitstream/1813/10898/1/phonon_transmission_through_defects_in_nanotubes.pdf.
74. ↑ 74.0 74.1 Nikolaev, Pavel (April 2004). "Gas-phase production of single-walled carbon nanotubes from carbon monoxide: a review of the hipco process". Journal of Nanoscience and Nanotechnology 4 (4): 307–316. doi:10.1166/jnn.2004.066. ISSN 1533-4880. PMID 15296221.
75. ↑ Schulz, Mark J.; Shanov, Vesselin N.; Yun, Yeoheung (2009). Nanomedicine Design of Particles, Sensors, Motors, Implants, Robots, and Devices. Artech House. ISBN 9781596932807. https://books.google.com/books?id=L_zVa647-80C&pg=PA476&lpg=PA476.
76. ↑ Takeuchi, K.; Hayashi, T.; Kim, Y. A.; Fujisawa, K. and Endo, M. (February 2014) "The state-of-the-art science and applications of carbon nanotubes", nanojournal.ifmo.ru. Volume 5, Issue 1, p. 15
77. ↑ Bronikowski, Michael J.; Willis, Peter A.; Colbert, Daniel T.; Smith, K. A.; Smalley, Richard E. (2001-07-01). "Gas-phase production of carbon single-walled nanotubes from carbon monoxide via the HiPco process: A parametric study". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 19 (4): 1800–1805. doi:10.1116/1.1380721. ISSN 0734-2101. Bibcode: 2001JVSTA..19.1800B.
78. ↑ Itkis, M. E.; Perea, D. E.; Niyogi, S.; Rickard, S. M.; Hamon, M. A.; Hu, H.; Zhao, B.; Haddon, R. C. (2003-03-01). "Purity Evaluation of As-Prepared Single-Walled Carbon Nanotube Soot by Use of Solution-Phase Near-IR Spectroscopy". Nano Letters 3 (3): 309–314. doi:10.1021/nl025926e. ISSN 1530-6984. Bibcode: 2003NanoL...3..309I.
79. ↑ Wang, Lu; Pumera, Martin (2014-09-25). "Residual metallic impurities within carbon nanotubes play a dominant role in supposedly "metal-free" oxygen reduction reactions". Chemical Communications 50 (84): 12662–12664. doi:10.1039/C4CC03271C. ISSN 1364-548X. PMID 25204561.
80. ↑ Eatemadi, Ali; Daraee, Hadis; Karimkhanloo, Hamzeh; Kouhi, Mohammad; Zarghami, Nosratollah; Akbarzadeh, Abolfazl; Abasi, Mozhgan; Hanifehpour, Younes et al. (2014-08-13). "Carbon nanotubes: properties, synthesis, purification, and medical applications". Nanoscale Research Letters 9 (1): 393. doi:10.1186/1556-276X-9-393. ISSN 1931-7573. PMID 25170330. Bibcode: 2014NRL.....9..393E.
81. ↑ Sanei, S. (2019). "Effect of Nanocomposite Microstructure on Stochastic Elastic Properties: an FEA Study". ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering 5 (3): 6 pages. doi:10.1115/1.4043410.
82. ↑ Sanei, Seyed Hamid Reza; Doles, Randall; Ekaitis, Tyler (2019). "Effect of Nanocomposite Microstructure on Stochastic Elastic Properties: An Finite Element Analysis Study". ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering 5 (3): 030903. doi:10.1115/1.4043410.
83. ↑ 83.0 83.1 Stefaniak, Aleksandr B. (2017). "Principal Metrics and Instrumentation for Characterization of Engineered Nanomaterials". in Mansfield, Elisabeth; Kaiser, Debra L.; Fujita, Daisuke et al.. Metrology and Standardization of Nanotechnology. Wiley-VCH Verlag. pp. 151–174. doi:10.1002/9783527800308.ch8. ISBN 9783527800308.
84. ↑ "ISO/TS 10868:2017 – Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy". https://www.iso.org/standard/69547.html. Retrieved 2017-09-06.
85. ↑ "ISO/TS 10797:2012 – Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy". https://www.iso.org/standard/46127.html.
86. ↑ 86.0 86.1 "ISO/TS 10798:2011 – Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis". https://www.iso.org/standard/46128.html. Retrieved 2017-09-06.
87. ↑ 87.0 87.1 Fagan, Jeffrey (2009-03-05). "Carbon Nanotube Reference Materials". U.S. National Institute of Standards and Technology. https://www.nist.gov/programs-projects/carbon-nanotube-reference-materials.
88. ↑ "SRM 2483 – Single-Wall Carbon Nanotubes (Raw Soot)". https://www-s.nist.gov/srmors/view_detail.cfm?srm=2483.
89. ↑ "SWCNT-1: Single-Wall Carbon Nanotube Certified Reference Material – National Research Council Canada". 2014-11-07. https://www.nrc-cnrc.gc.ca/eng/solutions/advisory/crm/certificates/swcnt_1.html. Retrieved 2017-09-06.
90. ↑ "RM 8281 – Single-Wall Carbon Nanotubes (Dispersed, Three Length-Resolved Populations)". https://www-s.nist.gov/srmors/view_detail.cfm?srm=8281. Retrieved 2017-09-06.
91. ↑ "ISO/TR 10929:2012 – Nanotechnologies – Characterization of multiwall carbon nanotube (MWCNT) samples". https://www.iso.org/standard/46424.html.
92. ↑ "ISO/TS 11888:2017 –Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors". https://www.iso.org/standard/69549.html. Retrieved 2017-09-06.
93. ↑ Stando, Grzegorz; Łukawski, Damian; Lisiecki, Filip; Janas, Dawid (January 2019). "Intrinsic hydrophilic character of carbon nanotube networks". Applied Surface Science 463: 227–233. doi:10.1016/j.apsusc.2018.08.206. ISSN 0169-4332. Bibcode: 2019ApSS..463..227S.
94. ↑ Karousis, Nikolaos; Tagmatarchis, Nikos; Tasis, Dimitrios (14 June 2010). "Current Progress on the Chemical Modification of Carbon Nanotubes". Chemical Reviews 110 (9): 5366–5397. doi:10.1021/cr100018g. PMID 20545303.
95. ↑ Zaderko, Alexander; UA & Vasyl UA, "United States Patent: 10000382 - Method for carbon materials surface modification by the fluorocarbons and derivatives",  patent 10000382, issued June 19, 2018
96. ↑ "WO16072959 Method for Carbon Materials Surface Modification by the Fluorocarbons and Derivatives". https://patentscope.wipo.int/search/en/detail.jsf?docId=WO16072959. Retrieved 2018-09-17.
97. ↑ Single wall carbon nanotubes at OCSiAl web site
98. ↑ Pagni, John (5 March 2010). "Amroy aims to become nano-leader". European Plastics News. Archived from the original on 10 July 2011. https://web.archive.org/web/20110710204854/http://www.europeanplasticsnews.com/subscriber/headlines2.html?cat=1&id=1267781513.
99. ↑ "Nanotube Tips". nanoScience instruments. Archived from the original on 27 October 2011. https://web.archive.org/web/20111027064700/http://www.nanoscience.com/store/pc/viewCategories.asp?idCategory=9.
100. ↑ Haddon, Robert C.; Laura P. Zanello; Bin Zhao; Hui Hu (2006). "Bone Cell Proliferation on Carbon Nanotubes". Nano Letters 6 (3): 562–567. doi:10.1021/nl051861e. PMID 16522063. Bibcode: 2006NanoL...6..562Z. https://figshare.com/articles/Bone_Cell_Proliferation_on_Carbon_Nanotubes/3234403.
101. ↑ Noyce, Steven G.; Doherty, James L.; Cheng, Zhihui; Han, Hui; Bowen, Shane; Franklin, Aaron D. (2019-02-05). "Electronic Stability of Carbon Nanotube Transistors Under Long-Term Bias Stress". Nano Letters (American Chemical Society (ACS)) 19 (3): 1460–1466. doi:10.1021/acs.nanolett.8b03986. ISSN 1530-6984.
102. ↑ "Publications on carbon nanotube applications including scaffold microfabrication". 27 May 2014. http://nano.byu.edu/publications.
103. ↑ Belkin, A.; et., al. (2015). "Self-Assembled Wiggling Nano-Structures and the Principle of Maximum Entropy Production". Sci. Rep. 5: 8323. doi:10.1038/srep08323. PMID 25662746. Bibcode: 2015NatSR...5E8323B.
104. ↑ Tan, Chin Wei; Tan, Kok Hong; Ong, Yit Thai; Mohamed, Abdul Rahman; Zein, Sharif Hussein Sharif; Tan, Soon Huat (2012-09-01). "Energy and environmental applications of carbon nanotubes". Environmental Chemistry Letters 10 (3): 265–273. doi:10.1007/s10311-012-0356-4. ISSN 1610-3653.
105. ↑ [1]DeLuca, Michael J.; Christopher J. Felker & Dirk Heider, "System and methods for use in monitoring a structure",  patent
106. ↑ "Pirahna USV built using nano-enhanced carbon prepreg". ReinforcedPlastics.com. 19 February 2009. Archived from the original on 3 March 2012. https://web.archive.org/web/20120303141747/http://www.reinforcedplastics.com/view/7467/pirahna-usv-built-using-nanoenhanced-carbon-prepreg/.
107. ↑ "Legendary Swords' Sharpness, Strength From Nanotubes, Study Says". http://news.nationalgeographic.com/news/2006/11/061116-nanotech-swords.html.
108. ↑ Gullapalli, S.; Wong, M.S. (2011). "Nanotechnology: A Guide to Nano-Objects". Chemical Engineering Progress 107 (5): 28–32. http://www.aiche.org/uploadedFiles/Publications/CEPMagazine/051128_public.pdf. Retrieved 24 November 2011.
109. ↑ Simonite, Tom. "IBM Expects Nanotube Transistor Computer Chips Ready Soon After 2020". https://www.technologyreview.com/s/528601/ibm-commercial-nanotube-transistors-are-coming-soon/.
110. ↑ Sanderson, K. (2006). "Sharpest cut from nanotube sword". Nature News. doi:10.1038/news061113-11.
111. ↑ Reibold, M.; Paufler, P; Levin, AA; Kochmann, W; Pätzke, N; Meyer, DC (16 November 2006). "Materials: Carbon nanotubes in an ancient Damascus sabre". Nature 444 (7117): 286. doi:10.1038/444286a. PMID 17108950. Bibcode: 2006Natur.444..286R.
112. ↑ Valenti, G.; Boni, A.; Melchionna, M.; Cargnello, M.; Nasi, L.; Bertoli, G.; Gorte, R. J.; Marcaccio, M. et al. (2016). "Co-axial heterostructures integrating palladium/titanium dioxide with carbon nanotubes for efficient electrocatalytic hydrogen evolution". Nature Communications 7: 13549. doi:10.1038/ncomms13549. PMID 27941752. Bibcode: 2016NatCo...713549V.
113. ↑ 113.0 113.1 J. Lienig; M. Thiele (2018). "Mitigating Electromigration in Physical Design". Fundamentals of Electromigration-Aware Integrated Circuit Design. Springer. doi:10.1007/978-3-319-73558-0. ISBN 978-3-319-73557-3.
114. ↑ Mintmire, J.W.; Dunlap, B.I.; White, C.T. (1992). "Are Fullerene Tubules Metallic?". Phys. Rev. Lett. 68 (5): 631–634. doi:10.1103/PhysRevLett.68.631. PMID 10045950. Bibcode: 1992PhRvL..68..631M.
115. ↑ Dekker, C. (1999). "Carbon nanotubes as molecular quantum wires". Physics Today 52 (5): 22–28. doi:10.1063/1.882658. Bibcode: 1999PhT....52e..22D.
116. ↑ Martel, R.; Derycke, V.; Lavoie, C.; Appenzeller, J.; Chan, K.; Tersoff, J.; Avouris, Ph. (2001). "Ambipolar Electrical Transport in Semiconducting Single-Wall Carbon Nanotubes". Phys. Rev. Lett. 87 (25): 256805. doi:10.1103/PhysRevLett.87.256805. PMID 11736597. Bibcode: 2001PhRvL..87y6805M.
117. ↑ Susantyoko, Rahmat Agung; Karam, Zainab; Alkhoori, Sara; Mustafa, Ibrahim; Wu, Chieh-Han; Almheiri, Saif (2017). "A surface-engineered tape-casting fabrication technique toward the commercialisation of freestanding carbon nanotube sheets". Journal of Materials Chemistry A 5 (36): 19255–19266. doi:10.1039/c7ta04999d. ISSN 2050-7488.
118. ↑ Karam, Zainab; Susantyoko, Rahmat Agung; Alhammadi, Ayoob; Mustafa, Ibrahim; Wu, Chieh-Han; Almheiri, Saif (2018-02-26). "Development of Surface-Engineered Tape-Casting Method for Fabricating Freestanding Carbon Nanotube Sheets Containing Fe2 O3 Nanoparticles for Flexible Batteries". Advanced Engineering Materials 20 (6): 1701019. doi:10.1002/adem.201701019. ISSN 1438-1656.
119. ↑ Behabtu, Natnael; Young, Colin C.; Tsentalovich, Dmitri E.; Kleinerman, Olga; Wang, Xuan; Ma, Anson W. K.; Bengio, E. Amram; Waarbeek, Ron F. ter et al. (2013-01-11). "Strong, Light, Multifunctional Fibers of Carbon Nanotubes with Ultrahigh Conductivity". Science 339 (6116): 182–186. doi:10.1126/science.1228061. ISSN 0036-8075. PMID 23307737. Bibcode: 2013Sci...339..182B.
120. ↑ Piraux, L.; Abreu Araujo, F.; Bui, T. N.; Otto, M. J.; Issi, J.-P. (26 August 2015). "Two-dimensional quantum transport in highly conductive carbon nanotube fibers". Physical Review B 92 (8): 085428. doi:10.1103/PhysRevB.92.085428. Bibcode: 2015PhRvB..92h5428P.
121. ↑ Liu, F.; Wagterveld, R.M.; Gebben, B.; Otto, M.J.; Biesheuvel, P.M.; Hamelers, H.V.M. (November 2014). "Carbon nanotube yarns as strong flexible conductive capacitive electrodes". Colloid and Interface Science Communications 3: 9–12. doi:10.1016/j.colcom.2015.02.001.
122. ↑ Pyrhönen, Juha; Montonen, Juho; Lindh, Pia; Vauterin, Johanna Julia; Otto, Marcin (2015-02-28). "Replacing Copper with New Carbon Nanomaterials in Electrical Machine Windings". International Review of Electrical Engineering (IREE) 10 (1): 12. doi:10.15866/iree.v10i1.5253. ISSN 1827-6679.
123. ↑ Carbon Nanotube Yarn Rotates Electric Motors at LUT. Youtube
124. ↑ CDC – NIOSH Publications and Products – Current Intelligence Bulletin 65: Occupational Exposure to Carbon Nanotubes and Nanofibers (2013–145). 2013. doi:10.26616/NIOSHPUB2013145. https://www.cdc.gov/niosh/docs/2013-145/default.html. Retrieved 2017-02-01.
125. ↑ "REACH Registration Completed for Single-Wall Carbon Nanotubes". PCI Mag. 16 October 2016. http://www.pcimag.com/articles/102634-reach-registration-completed-for-single-wall-carbon-nanotubes. Retrieved 24 November 2016.
126. ↑ 126.0 126.1 126.2 Pacios Pujadó, Mercè (2012). Carbon Nanotubes as Platforms for Biosensors with Electrochemical and Electronic Transduction. Springer Theses. Springer Heidelberg. pp. xx, 208. doi:10.1007/978-3-642-31421-6. ISBN 978-3-642-31421-6.
127. ↑ 127.0 127.1 127.2 127.3 127.4 Eklund, Peter C. (2007) (PDF). ﻿WTEC Panel Report on 'International Assessment of Research and Development of Carbon Nanotube Manufacturing and Applications' Final Report﻿ (Report). World Technology Evaluation Center (WTEC). Archived on 11 March 2017. Error: If you specify `|archivedate=`, you must also specify `|archiveurl=`. http://www.wtec.org/cnm/CNM_final_report.pdf. Retrieved 5 August 2015.
128. ↑ Endo, M.. "Grow carbon fibers in the vapor phase". http://nanotube.msu.edu/nt05/abstracts/NT05_MEndo.pdf.
129. ↑ Koyama, T. and Endo, M.T. (1983) "Method for Manufacturing Carbon Fibers by a Vapor Phase Process," Japanese Patent, 1982-58, 966.
130. ↑ Abrahamson, John; Wiles, Peter G.; Rhoades, Brian L. (1999). "Structure of Carbon Fibers Found on Carbon Arc Anodes". Carbon 37 (11): 1873–1874. doi:10.1016/S0008-6223(99)00199-2.
131. ↑ Izvestiya Akademii Nauk SSSR, Metals. 1982, #3, pp. 12–17 (in Russian)
132. ↑ "Carbon fibrils, method for producing same and compositions containing same" US patent 4663230, issued 1987-05-05
133. ↑ Krätschmer, W.; Lamb, Lowell D.; Fostiropoulos, K.; Huffman, Donald R. (1990). "Solid C60: a new form of carbon". Nature 347 (6291): 354–358. doi:10.1038/347354a0. Bibcode: 1990Natur.347..354K.

## External links

| Wikimedia Commons has media related to Carbon nanotube.

|

* Carbon nanotube (chemical compound) at the Encyclopædia Britannica
* Nanocarbon: From Graphene to Buckyballs. Interactive 3D models of cyclohexane, benzene, graphene, graphite, chiral & non-chiral nanotubes, and C60 Buckyballs - WeCanFigureThisOut.org.
* The Nanotube site. Last updated 2013.04.12
* EU Marie Curie Network CARBIO: Multifunctional carbon nanotubes for biomedical applications
* Carbon nanotube on arxiv.org
* C60 and Carbon Nanotubes a short video explaining how nanotubes can be made from modified graphite sheets and the three different types of nanotubes that are formed
* Carbon Nanotubes & Buckyballs.
* The Wondrous World of Carbon Nanotubes
* Learning module for Bandstructure of Carbon Nanotubes and Nanoribbons
* Durability of carbon nanotubes and their potential to cause inflammation by Dr Megan Osmond and others. (SafeWork Australia, May 2011). This was a collaboration between the Institute of Occupational Medicine, Edinburgh University and CSIRO in Australia.
* Selection of free-download articles on carbon nanotubes
* First computer made of carbon nanotubes is unveiled, BBC News 2013-09-25
* Research using carbon nanotubes for microfabrication and in other applications
* WOLFRAM Demonstrations Project: Electronic Band Structure of a Single-Walled Carbon Nanotube by the Zone-Folding Method
* WOLFRAM Demonstrations Project: Electronic Structure of a Single-Walled Carbon Nanotube in Tight-Binding Wannier Representation

* v
* t
* e

Allotropes of carbon

sp3 forms|

* Diamond (cubic)
* Lonsdaleite (hexagonal diamond)

sp2 forms|

* Graphite
* Graphene
* Fullerenes, including C60 (buckminsterfullerene), C70, Fullerene whiskers, Nanotubes, Nanobuds, Nanoscrolls)
* Glassy carbon

sp forms|

* Linear acetylenic carbon
* C18 (cyclo[18]carbon)

mixed sp3/sp2 forms|

* Amorphous carbon
* Carbon nanofoam
* Carbide-derived carbon
* Q-carbon

other forms|

* C1 (atomic carbon)
* C2 (diatomic carbon)
* C3 (tricarbon)

hypothetical forms|

* C3 (cyclopropatriene)
* C6 (benzotriyne)
* C6 (prismane C8)
* Chaoite
* Haeckelites
* Cubic carbon
* Metallic carbon
* Penta-graphene

related|

* Activated carbon
* Carbon black
* Charcoal
* Carbon fiber
* Aggregated diamond nanorod

* v
* t
* e

Emerging technologies

Fields|

| Agriculture|

* Agricultural robot
* Cellular agriculture
* Closed ecological systems
* Cultured meat
* Genetically modified food
* Precision agriculture
* Vertical farming

|

Architecture|

* Arcology
* Building printing
* Contour crafting
* Domed city

Biomedical|

* Artificial uterus
* Ampakine
* Brain transplant
* Cryonics
* Cryoprotectant
* Cryopreservation
* Vitrification
* Suspended animation
* De-extinction
* Genetic engineering
* Gene therapy
* Head transplant
* Isolated brain
* Life extension
* Strategies for Engineered Negligible Senescence
* Nanomedicine
* Nanosensors
* Organ printing
* Personalized medicine
* Regenerative medicine
* Stem-cell therapy
* Tissue engineering
* Robot-assisted surgery
* Synthetic biology
* Synthetic genomics
* Virotherapy
* Oncolytic virus
* Tricorder
* Whole genome sequencing

Displays|

| Next generation|

* FED
* FLCD
* iMoD
* Laser
* LPD
* OLED
* OLET
* QD-LED
* SED
* TPD
* TDEL
* TMOS
* MicroLED

|

Screenless|

* Bionic contact lens
* Head-mounted display
* Head-up display
* Optical head-mounted display
* Virtual retinal display

Other|

* Autostereoscopy
* Flexible display
* Holographic display
* Computer-generated holography
* Multi-primary color display
* Ultra HD
* Volumetric display

Electronics|

* Electronic nose
* E-textiles
* Flexible electronics
* Molecular electronics
* Nanoelectromechanical systems
* Memristor
* Spintronics
* Thermal copper pillar bump
* Twistronics

Energy|

| Production|

* Airborne wind turbine
* Artificial photosynthesis
* Biofuels
* Carbon-neutral fuel
* Concentrated solar power
* Fusion power
* Home fuel cell
* Hydrogen economy
* Methanol economy
* Molten salt reactor
* Nantenna
* Photovoltaic pavement
* Space-based solar power
* Vortex engine

|

Storage|

* Beltway battery
* Compressed air energy storage
* Flywheel energy storage
* Grid energy storage
* Lithium–air battery
* Molten-salt battery
* Nanowire battery
* Research in lithium-ion batteries
* Silicon–air battery
* Thermal energy storage
* Ultracapacitor

Other|

* Smart grid
* Wireless power

Information and
communications

* Ambient intelligence
* Internet of things
* Artificial intelligence
* Applications of artificial intelligence
* Progress in artificial intelligence
* Machine translation
* Mobile translation
* Machine vision
* Semantic Web
* Speech recognition
* Atomtronics
* Carbon nanotube field-effect transistor
* Cybermethodology
* Fourth-generation optical discs
* 3D optical data storage
* Holographic data storage
* GPGPU
* Memory
* CBRAM
* FRAM
* Millipede
* MRAM
* NRAM
* PRAM
* Racetrack memory
* RRAM
* SONOS
* Optical computing
* RFID
* Chipless RFID
* Software-defined radio
* Three-dimensional integrated circuit

Manufacturing|

* 3D printing
* Claytronics
* Molecular assembler
* Utility fog

Materials science|

* Aerogel
* Amorphous metal
* Artificial muscle
* Conductive polymer
* Femtotechnology
* Fullerene
* Graphene
* High-temperature superconductivity
* High-temperature superfluidity
* Linear acetylenic carbon
* Metamaterials
* Metamaterial cloaking
* Metal foam
* Multi-function structures
* Nanotechnology
* Carbon nanotubes
* Molecular nanotechnology
* Nanomaterials
* Picotechnology
* Programmable matter
* Quantum dots
* Silicene
* Superalloy
* Synthetic diamond

Military|

* Antimatter weapon
* Caseless ammunition
* Directed-energy weapon
* Laser
* Maser
* Particle-beam weapon
* Sonic weapon
* Coilgun
* Railgun
* Plasma weapon
* Pure fusion weapon
* Stealth technology
* Vortex ring gun

Neuroscience|

* Artificial brain
* Brain–computer interface
* Electroencephalography
* Mind uploading
* Brain-reading
* Neuroinformatics
* Neuroprosthetics
* Bionic eye
* Brain implant
* Exocortex
* Retinal implant

Quantum|

* Quantum algorithms
* Quantum amplifier
* Quantum bus
* Quantum channel
* Quantum circuit
* Quantum complexity theory
* Quantum computing
* Quantum cryptography
* Quantum dynamics
* Quantum electronics
* Quantum error correction
* Quantum imaging
* Quantum information
* Quantum key distribution
* Quantum logic
* Quantum logic gates
* Quantum machine
* Quantum machine learning
* Quantum metamaterial
* Quantum metrology
* Quantum network
* Quantum neural network
* Quantum optics
* Quantum programming
* Quantum sensing
* Quantum simulator
* Quantum teleportation

Robotics|

* Domotics
* Nanorobotics
* Powered exoskeleton
* Self-reconfiguring modular robot
* Swarm robotics
* Uncrewed vehicle

Space science|

| Launch|

* Fusion rocket
* Non-rocket spacelaunch
* Mass driver
* Orbital ring
* Skyhook
* Space elevator
* Space fountain
* Space tether
* Reusable launch system

|

Propulsion|

* Beam-powered propulsion
* Ion thruster
* Laser propulsion
* Plasma propulsion engine
* Helicon thruster
* VASIMR
* Nuclear pulse propulsion
* Solar sail

Other|

* Interstellar travel
* Propellant depot
* Laser communication in space

Transport|

| Aerial|

* Adaptive compliant wing
* Backpack helicopter
* Delivery drone
* Flying car
* High-altitude platform
* Jet pack
* Pulse detonation engine
* Scramjet
* Spaceplane
* Supersonic transport

|

Land|

* Airless tire
* Alternative fuel vehicle
* Hydrogen vehicle
* Driverless car
* Ground effect train
* Hyperloop
* Maglev train
* Personal rapid transit
* Transit Elevated Bus
* Vactrain
* Vehicular communication systems

Pipeline|

* Pneumatic transport
* Automated vacuum collection

Other|

* Anti-gravity
* Cloak of invisibility
* Digital scent technology
* Force field
* Plasma window
* Immersive virtual reality
* Magnetic refrigeration
* Phased-array optics

Topics|

* Collingridge dilemma
* Differential technological development
* Disruptive Innovation
* Ephemeralization
* Exploratory engineering
* Fictional technology
* Proactionary principle
* Technological change
* Technological unemployment
* Technological convergence
* Technological evolution
* Technological paradigm
* Technology forecasting
* Accelerating change
* Moore's law
* Technological singularity
* Technology scouting
* Technology readiness level
* Technology roadmap
* Transhumanism

* Category
* 16x16px List

* v
* t
* e

Space elevator

Main articles|

* History
* Structure
* Construction
* Economics
* Safety
* In fiction

File:Space elevator structural diagram.png

Technologies|

* Electromagnetic propulsion
* Counterweight
* Carbon nanotube
* Nanotechnology
* Space tether
* Momentum exchange tether

Related concepts|

* Launch loop
* Lunar space elevator
* Orbital ring
* Skyhook
* Space fountain

Competitions|

* List of competitions
* Elevator

People|

* Yuri Artsutanov
* Bradley C. Edwards
* Jerome Pearson
* Konstantin Tsiolkovsky

Organizations|

* KC Space Pirates
* LaserMotive
* LiftPort Group

* Non-rocket spacelaunch
* Spaceflight
* Megascale engineering

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template