Diamond

A rough diamond[lower-alpha 1]

General
Category| Native minerals
Formula
(repeating unit)| C
Strunz classification| 1.CB.10a
Dana classification| 1.3.6.1
Crystal system| Cubic
Crystal class| Hexoctahedral (m3m)
H-M symbol: (4/m 3 2/m)
Space group| Fd3m (No. 227)
Structure
Jmol (3D)| Interactive image
Identification
Formula mass| 12.01 g/mol
Color| Typically yellow, brown, or gray to colorless. Less often blue, green, black, translucent white, pink, violet, orange, purple, and red.
Crystal habit| Octahedral
Twinning| Spinel law common (yielding "macle")
Cleavage| 111 (perfect in four directions)
Fracture| Irregular/Uneven
Mohs scale hardness| 10 (defining mineral)
|re|er}}| Adamantine
Streak| Colorless
Diaphaneity| Transparent to subtransparent to translucent
Specific gravity| 3.52±0.01
Density| 3.5–3.53 g/cm3 3500–3530 kg/m3
Polish luster| Adamantine
Optical properties| Isotropic
Refractive index| 2.418 (at 500 nm)
Birefringence| None
Pleochroism| None
Dispersion| 0.044
Melting point| Pressure dependent
References| [2][3]
Main diamond producing countries (in French)

Diamond is a mineral form of the element carbon with its atoms arranged in a crystal structure called diamond cubic. Diamond is a tasteless, odorless, strong, brittle solid, a poor conductor of electricity, colorless in pure form, and insoluble in water. Another solid form of carbon known as graphite is the chemically stable form of carbon at room temperature and pressure, but diamond is metastable and converts to it at a negligible rate under those conditions. Diamond has the highest hardness and thermal conductivity of any natural material, properties that are used in major industrial applications such as cutting and polishing tools.

Because the arrangement of atoms in diamond is extremely rigid, few types of impurity can contaminate it (two exceptions are boron and nitrogen). Small numbers of defects or impurities—about one per million of lattice atoms—can color a diamond blue (boron), yellow (nitrogen), brown (defects), green (radiation exposure), purple, pink, orange, or red. Diamond also has a very high refractive index and a relatively high optical dispersion.

Most natural diamonds have ages between 1 billion and 3.5 billion years. Most were formed at depths between 150 and 250 kilometres (93 and 155 mi) in the Earth's mantle, although a few have come from as deep as 800 kilometres (500 mi). Under high pressure and temperature, carbon-containing fluids dissolved various minerals and replaced them with diamonds. Much more recently (hundreds to tens of million years ago), they were carried to the surface in volcanic eruptions and deposited in igneous rocks known as kimberlites and lamproites.

Synthetic diamonds can be grown from high-purity carbon under high pressures and temperatures or from hydrocarbon gases by chemical vapor deposition (CVD). Natural and synthetic diamonds are most commonly distinguished using optical techniques or thermal conductivity measurements.

## Contents

* 1 Etymology, earliest use and composition discovery
* 2 Properties
* 2.1 Thermodynamics
* 2.2 Crystal structure
* 2.3 Crystal habit
* 2.4 Mechanical
* 2.4.1 Hardness
* 2.4.2 Toughness
* 2.4.3 Yield strength
* 2.4.4 Elasticity and tensile strength
* 2.5 Electrical conductivity
* 2.6 Surface property
* 2.7 Chemical stability
* 2.8 Color
* 2.9 Clarity
* 2.10 Fluorescence
* 2.11 Thermal conductivity
* 3 Geology
* 3.1 Surface distribution
* 3.2 Exploration
* 3.3 Ages
* 3.4 Origin in mantle
* 3.5 Carbon sources
* 3.6 Formation and growth
* 3.7 Transport to the surface
* 3.8 Double diamonds
* 3.9 In space
* 4 Industry
* 4.1 Gem-grade diamonds
* 4.1.1 Cutting
* 4.1.2 Marketing
* 4.2 Industrial-grade diamonds
* 4.3 Mining
* 4.3.1 Political issues
* 5 Synthetics, simulants, and enhancements
* 5.1 Synthetics
* 5.2 Simulants
* 5.3 Enhancements
* 5.4 Identification
* 6 See also
* 7 Notes
* 8 Citations
* 9 General and cited references
* 10 Further reading
* 11 External links

## Etymology, earliest use and composition discovery

The name diamond is derived from Ancient Greek: ἀδάμας (adámas), 'proper, unalterable, unbreakable, untamed', from ἀ- (a-), 'not' + Ancient Greek: δαμάω (damáō), 'to overpower, tame'.[5] Diamonds are thought to have been first recognized and mined in India, where significant alluvial deposits of the stone could be found many centuries ago along the rivers Penner, Krishna, and Godavari. Diamonds have been known in India for at least 3,000 years but most likely 6,000 years.[6]

Diamonds have been treasured as gemstones since their use as religious icons in ancient India. Their usage in engraving tools also dates to early human history.[7][8] The popularity of diamonds has risen since the 19th century due to increased supply, improved cutting and polishing techniques, growth in the world economy, and innovative and successful advertising campaigns.[9]

In 1772, the French scientist Antoine Lavoisier used a lens to concentrate the rays of the sun on a diamond in an atmosphere of oxygen, and showed that the only product of the combustion was carbon dioxide, proving that diamond is composed of carbon.[10] Later, in 1797, the English chemist Smithson Tennant repeated and expanded that experiment.[11] By demonstrating that burning diamond and graphite releases the same amount of gas, he established the chemical equivalence of these substances.[12]

## Properties

Main article: Chemistry:Material properties of diamond

Diamond is a solid form of pure carbon with its atoms arranged in a crystal. Solid carbon comes in different forms known as allotropes depending on the type of chemical bond. The two most common allotropes of pure carbon are diamond and graphite. In graphite, the bonds are sp2 orbital hybrids and the atoms form in planes, with each bound to three nearest neighbors, 120 degrees apart. In diamond, they are sp3 and the atoms form tetrahedral, with each bound to four nearest neighbors.[13][14] Tetrahedra are rigid, the bonds are strong, and, of all known substances, diamond has the greatest number of atoms per unit volume, which is why it is both the hardest and the least compressible.[15][16] It also has a high density, ranging from 3150 to 3530 kilograms per cubic metre (over three times the density of water) in natural diamonds and 3520 kg/m3 in pure diamond.[2] In graphite, the bonds between nearest neighbors are even stronger, but the bonds between parallel adjacent planes are weak, so the planes easily slip past each other. Thus, graphite is much softer than diamond. However, the stronger bonds make graphite less flammable.[17]

Diamonds have been adopted for many uses because of the material's exceptional physical characteristics. It has the highest thermal conductivity and the highest sound velocity. It has low adhesion and friction, and its coefficient of thermal expansion is extremely low. Its optical transparency extends from the far infrared to the deep ultraviolet, and it has high optical dispersion. It also has high electrical resistance. It is chemically inert, not reacting with most corrosive substances, and has excellent biological compatibility.[18]

### Thermodynamics

Theoretically predicted phase diagram of carbon, from 1989 and updated with newer work[19]

The equilibrium pressure and temperature conditions for a transition between graphite and diamond are well established theoretically and experimentally. The equilibrium pressure varies linearly with temperature, between 1.7 GPa at 0 K and 12 GPa at 5000 K (the diamond/graphite/liquid triple point).[20][21] However, the phases have a wide region about this line where they can coexist. At standard temperature and pressure, 20 °C (293 K) and 1 standard atmosphere (0.10 MPa), the stable phase of carbon is graphite, but diamond is metastable, with a significant kinetic energy barrier that the atoms must overcome to reach the lower energy state,[22] and its rate of conversion to graphite is negligible, with a timescale of millions to billions of years.[16][22] However, at temperatures above about 4500 K, diamond rapidly converts to graphite. Experiments have found that diamond, in the presence of H
2O passes through an intermediate linear carbon phase.[23]

Rapid conversion of graphite to diamond requires pressures well above the equilibrium line: at 2000 K, a pressure of 35 GPa (about 350,000 standard atmospheres) is needed.[20]

Above the graphite–diamond–liquid carbon triple point, the melting point of diamond increases slowly with increasing pressure, but at pressures of hundreds of GPa, it decreases.[24] At high pressures, silicon and germanium have a BC8 body-centered cubic crystal structure, and a similar structure is predicted for carbon at high pressures. At 0 K, the transition is predicted to occur at 1100 GPa.[25]

Results published in Nature Physics in 2010 suggest that, at ultra-high pressures and temperatures (about 10 million atmospheres or 1 TPa and 50,000 °C), diamond melts into a metallic fluid. The extreme conditions required for this to occur are present in the ice giant planets Neptune and Uranus, both of which are made up of approximately 10 percent carbon and could hypothetically contain oceans of liquid carbon. Since large quantities of metallic fluid can affect the magnetic field, this could serve to explain why the geographic and magnetic poles of the two planets are not aligned.[26][27]

### Crystal structure

See also: Chemistry:Crystallographic defects in diamond

Diamond unit cell, showing the tetrahedral structure

The most common crystal structure of diamond is called diamond cubic. It is formed of unit cells stacked together. Although there are 18 atoms in the figure, each corner atom is shared by eight unit cells and each atom in the center of a face is shared by two, so there are a total of eight atoms per unit cell.[28] The length of each side of the unit cell is denoted by a and is 3.567 angstroms.[29]

The nearest neighbor distance in the diamond lattice is 1.732a/4 where a is the lattice constant, usually given in Angstrøms as a = 3.567 Å, which is 0.3567 nm.

A diamond cubic lattice can be thought of as two interpenetrating face-centered cubic lattices with one displaced by ​1⁄4 of the diagonal along a cubic cell, or as one lattice with two atoms associated with each lattice point.[29] Viewed from a <1 1 1> crystallographic direction, it is formed of layers stacked in a repeating ABCABC ... pattern. Diamonds can also form an ABAB ... structure, which is known as hexagonal diamond or lonsdaleite, but this is far less common and is formed under different conditions from cubic carbon.[30]

### Crystal habit

One face of an uncut octahedral diamond, showing trigons (of positive and negative relief) formed by natural chemical etching

Diamonds occur most often as euhedral or rounded octahedra and twinned octahedra known as macles. As diamond's crystal structure has a cubic arrangement of the atoms, they have many facets that belong to a cube, octahedron, rhombicosidodecahedron, tetrakis hexahedron, or disdyakis dodecahedron. The crystals can have rounded-off and unexpressive edges and can be elongated. Diamonds (especially those with rounded crystal faces) are commonly found coated in nyf, an opaque gum-like skin.[31]

Some diamonds contain opaque fibers. They are referred to as opaque if the fibers grow from a clear substrate or fibrous if they occupy the entire crystal. Their colors range from yellow to green or gray, sometimes with cloud-like white to gray impurities. Their most common shape is cuboidal, but they can also form octahedra, dodecahedra, macles, or combined shapes. The structure is the result of numerous impurities with sizes between 1 and 5 microns. These diamonds probably formed in kimberlite magma and sampled the volatiles.[32]

Diamonds can also form polycrystalline aggregates. There have been attempts to classify them into groups with names such as boart, ballas, stewartite, and framesite, but there is no widely accepted set of criteria.[32] Carbonado, a type in which the diamond grains were sintered (fused without melting by the application of heat and pressure), is black in color and tougher than single crystal diamond.[33] It has never been observed in a volcanic rock. There are many theories for its origin, including formation in a star, but no consensus.[32][34][35]

### Mechanical

#### Hardness

The extreme hardness of diamond in certain orientations makes it useful in materials science, as in this pyramidal diamond embedded in the working surface of a Vickers hardness tester.

Diamond is the hardest material on the qualitative Mohs scale. To conduct the quantitative Vickers hardness test, samples of materials are struck with a pyramid of standardized dimensions using a known force – a diamond crystal is used for the pyramid to permit a wide range of materials to be tested. From the size of the resulting indentation, a Vickers hardness value for the material can be determined. Diamond's great hardness relative to other materials has been known since antiquity, and is the source of its name. This does not mean that it is infinitely hard, indestructible, or unscratchable.[36] Indeed, diamonds can be scratched by other diamonds[37] and worn down over time even by softer materials, such as vinyl phonograph records.[38]

Diamond hardness depends on its purity, crystalline perfection, and orientation: hardness is higher for flawless, pure crystals oriented to the <111> direction (along the longest diagonal of the cubic diamond lattice).[39] Therefore, whereas it might be possible to scratch some diamonds with other materials, such as boron nitride, the hardest diamonds can only be scratched by other diamonds and nanocrystalline diamond aggregates.

The hardness of diamond contributes to its suitability as a gemstone. Because it can only be scratched by other diamonds, it maintains its polish extremely well. Unlike many other gems, it is well-suited to daily wear because of its resistance to scratching—perhaps contributing to its popularity as the preferred gem in engagement or wedding rings, which are often worn every day.

The hardest natural diamonds mostly originate from the Copeton and Bingara fields located in the New England area in New South Wales, Australia. These diamonds are generally small, perfect to semiperfect octahedra, and are used to polish other diamonds. Their hardness is associated with the crystal growth form, which is single-stage crystal growth. Most other diamonds show more evidence of multiple growth stages, which produce inclusions, flaws, and defect planes in the crystal lattice, all of which affect their hardness. It is possible to treat regular diamonds under a combination of high pressure and high temperature to produce diamonds that are harder than the diamonds used in hardness gauges.[40]

Diamonds cut glass, but this does not positively identify a diamond because other materials, such as quartz, also lie above glass on the Mohs scale and can also cut it. Diamonds can scratch other diamonds, but this can result in damage to one or both stones. Hardness tests are infrequently used in practical gemology because of their potentially destructive nature.[41] The extreme hardness and high value of diamond means that gems are typically polished slowly, using painstaking traditional techniques and greater attention to detail than is the case with most other gemstones;[12] these tend to result in extremely flat, highly polished facets with exceptionally sharp facet edges. Diamonds also possess an extremely high refractive index and fairly high dispersion. Taken together, these factors affect the overall appearance of a polished diamond and most diamantaires still rely upon skilled use of a loupe (magnifying glass) to identify diamonds "by eye".[42]

#### Toughness

Somewhat related to hardness is another mechanical property toughness, which is a material's ability to resist breakage from forceful impact. The toughness of natural diamond has been measured as 50–65 MPa·m1/2.[contradictory][43][44] This value is good compared to other ceramic materials, but poor compared to most engineering materials such as engineering alloys, which typically exhibit toughness over 80 MPa·m1/2. As with any material, the macroscopic geometry of a diamond contributes to its resistance to breakage. Diamond has a cleavage plane and is therefore more fragile in some orientations than others. Diamond cutters use this attribute to cleave some stones before faceting them.[45] "Impact toughness" is one of the main indexes to measure the quality of synthetic industrial diamonds.

#### Yield strength

Diamond has a compressive yield strength of 130–140 GPa.[46] This exceptionally high value, along with the hardness and transparency of diamond, are the reasons that diamond anvil cells are the main tool for high pressure experiments.[47] These anvils have reached pressures of 600 GPa.[48] Much higher pressures may be possible with nanocrystalline diamonds.[47][48]

#### Elasticity and tensile strength

Usually, attempting to deform bulk diamond crystal by tension or bending results in brittle fracture. However, when single crystalline diamond is in the form of micro/nanoscale wires or needles (~100–300 nanometers in diameter, micrometers long), they can be elastically stretched by as much as 9–10 percent tensile strain without failure,[49] with a maximum local tensile stress of about 89–98 GPa,[50] very close to the theoretical limit for this material.[51]

### Electrical conductivity

Other specialized applications also exist or are being developed, including use as semiconductors: some blue diamonds are natural semiconductors, in contrast to most diamonds, which are excellent electrical insulators. The conductivity and blue color originate from boron impurity. Boron substitutes for carbon atoms in the diamond lattice, donating a hole into the valence band.[52]

Substantial conductivity is commonly observed in nominally undoped diamond grown by chemical vapor deposition. This conductivity is associated with hydrogen-related species adsorbed at the surface, and it can be removed by annealing or other surface treatments.[53][54]

Thin needles of diamond can be made to vary their electronic band gap from the normal 5.6 eV to near zero by selective mechanical deformation.[55]

High-purity diamond wafers 5 cm in diameter exhibit perfect resistance in one direction and perfect conductance in the other, creating the possibility of using them for quantum data storage. The material contains only 3 parts per million of nitrogen. The diamond was grown on a stepped substrate, which eliminated cracking.[56]

### Surface property

Diamonds are naturally lipophilic and hydrophobic, which means the diamonds' surface cannot be wet by water, but can be easily wet and stuck by oil. This property can be utilized to extract diamonds using oil when making synthetic diamonds. However, when diamond surfaces are chemically modified with certain ions, they are expected to become so hydrophilic that they can stabilize multiple layers of water ice at human body temperature.[57]

The surface of diamonds is partially oxidized. The oxidized surface can be reduced by heat treatment under hydrogen flow. That is to say, this heat treatment partially removes oxygen-containing functional groups. But diamonds (sp3C) are unstable against high temperature (above about 400 °C (752 °F)) under atmospheric pressure. The structure gradually changes into sp2C above this temperature. Thus, diamonds should be reduced below this temperature.[58]

### Chemical stability

At room temperature, diamonds do not react with any chemical reagents including strong acids and bases.

In an atmosphere of pure oxygen, diamond has an ignition point that ranges from 690 °C (1,274 °F) to 840 °C (1,540 °F); smaller crystals tend to burn more easily. It increases in temperature from red to white heat and burns with a pale blue flame, and continues to burn after the source of heat is removed. By contrast, in air the combustion will cease as soon as the heat is removed because the oxygen is diluted with nitrogen. A clear, flawless, transparent diamond is completely converted to carbon dioxide; any impurities will be left as ash.[59] Heat generated from cutting a diamond will not ignite the diamond,[60] and neither will a cigarette lighter,[61] but house fires and blow torches are hot enough. Jewelers must be careful when molding the metal in a diamond ring.[62]

Diamond powder of an appropriate grain size (around 50 microns) burns with a shower of sparks after ignition from a flame. Consequently, pyrotechnic compositions based on synthetic diamond powder can be prepared. The resulting sparks are of the usual red-orange color, comparable to charcoal, but show a very linear trajectory which is explained by their high density.[63] Diamond also reacts with fluorine gas above about 700 °C (1,292 °F).

### Color

Main article: Chemistry:Diamond color

Brown diamonds at the National Museum of Natural History in Washington, D.C. The most famous colored diamond, the Hope Diamond

Diamond has a wide band gap of 5.5 eV corresponding to the deep ultraviolet wavelength of 225 nanometers. This means that pure diamond should transmit visible light and appear as a clear colorless crystal. Colors in diamond originate from lattice defects and impurities. The diamond crystal lattice is exceptionally strong, and only atoms of nitrogen, boron, and hydrogen can be introduced into diamond during the growth at significant concentrations (up to atomic percents). Transition metals nickel and cobalt, which are commonly used for growth of synthetic diamond by high-pressure high-temperature techniques, have been detected in diamond as individual atoms; the maximum concentration is 0.01% for nickel[64] and even less for cobalt. Virtually any element can be introduced to diamond by ion implantation.[65]

Nitrogen is by far the most common impurity found in gem diamonds and is responsible for the yellow and brown color in diamonds. Boron is responsible for the blue color.[66] Color in diamond has two additional sources: irradiation (usually by alpha particles), that causes the color in green diamonds, and plastic deformation of the diamond crystal lattice. Plastic deformation is the cause of color in some brown[67] and perhaps pink and red diamonds.[68] In order of increasing rarity, yellow diamond is followed by brown, colorless, then by blue, green, black, pink, orange, purple, and red.[45] "Black", or carbonado, diamonds are not truly black, but rather contain numerous dark inclusions that give the gems their dark appearance. Colored diamonds contain impurities or structural defects that cause the coloration, while pure or nearly pure diamonds are transparent and colorless. Most diamond impurities replace a carbon atom in the crystal lattice, known as a carbon flaw. The most common impurity, nitrogen, causes a slight to intense yellow coloration depending upon the type and concentration of nitrogen present.[45] The Gemological Institute of America (GIA) classifies low saturation yellow and brown diamonds as diamonds in the normal color range, and applies a grading scale from "D" (colorless) to "Z" (light yellow). Yellow diamonds of high color saturation or a different color, such as pink or blue, are called fancy colored diamonds and fall under a different grading scale.[45]

In 2008, the Wittelsbach Diamond, a 35.56-carat (7.112 g) blue diamond once belonging to the King of Spain, fetched over US$24 million at a Christie's auction.[69] In May 2009, a 7.03-carat (1.406 g) blue diamond fetched the highest price per carat ever paid for a diamond when it was sold at auction for 10.5 million Swiss francs (6.97 million euros, or US$9.5 million at the time).[70] That record was, however, beaten the same year: a 5-carat (1.0 g) vivid pink diamond was sold for US$10.8 million in Hong Kong on December 1, 2009.[71]

### Clarity

Clarity is one of the 4C's (color, clarity, cut and carat weight) that helps in identifying the quality of diamonds. The Gemological Institute of America (GIA) developed 11 clarity scales to decide the quality of a diamond for its sale value. The GIA clarity scale spans from Flawless (FL) to included (I) having internally flawless (IF), very, very slightly included (VVS), very slightly included (VS) and slightly included (SI) in between. Impurities in natural diamonds are due to the presence of natural minerals and oxides. The clarity scale grades the diamond based on the color, size, location of impurity and quantity of clarity visible under 10x magnification.[72] Inclusions in diamond can be extracted by optical methods. The process is to take pre-enhancement images, identifying the inclusion removal part and finally removing the diamond facets and noises.[73]

### Fluorescence

Necklace of rough light brown diamonds under UV light (top) and normal light (bottom)

Between 25% and 35% of natural diamonds exhibit some degree of fluorescence when examined under invisible long-wave ultraviolet light or higher energy radiation sources such as X-rays and lasers.[74] Incandescent lighting will not cause a diamond to fluoresce. Diamonds can fluoresce in a variety of colors including blue (most common), orange, yellow, white, green and very rarely red and purple. Although the causes are not well understood, variations in the atomic structure, such as the number of nitrogen atoms present are thought to contribute to the phenomenon.

### Thermal conductivity

Diamonds can be identified by their high thermal conductivity (900–2320 W·m−1·K−1).[75] Their high refractive index is also indicative, but other materials have similar refractivity.

## Geology

Diamonds are extremely rare, with concentrations of at most parts per billion in source rock.[32] Before the 20th century, most diamonds were found in alluvial deposits. Loose diamonds are also found along existing and ancient shorelines, where they tend to accumulate because of their size and density.[76]: 149 Rarely, they have been found in glacial till (notably in Wisconsin and Indiana), but these deposits are not of commercial quality.[76]: 19 These types of deposit were derived from localized igneous intrusions through weathering and transport by wind or water.[77]

Most diamonds come from the Earth's mantle, and most of this section discusses those diamonds. However, there are other sources. Some blocks of the crust, or terranes, have been buried deep enough as the crust thickened so they experienced ultra-high-pressure metamorphism. These have evenly distributed microdiamonds that show no sign of transport by magma. In addition, when meteorites strike the ground, the shock wave can produce high enough temperatures and pressures for microdiamonds and nanodiamonds to form.[77] Impact-type microdiamonds can be used as an indicator of ancient impact craters.[78] Popigai impact structure in Russia may have the world's largest diamond deposit, estimated at trillions of carats, and formed by an asteroid impact.[79]

A common misconception is that diamonds form from highly compressed coal. Coal is formed from buried prehistoric plants, and most diamonds that have been dated are far older than the first land plants. It is possible that diamonds can form from coal in subduction zones, but diamonds formed in this way are rare, and the carbon source is more likely carbonate rocks and organic carbon in sediments, rather than coal.[80][81]

### Surface distribution

Geologic provinces of the world. The pink and orange areas are shields and platforms, which together constitute cratons.

Diamonds are far from evenly distributed over the Earth. A rule of thumb known as Clifford's rule states that they are almost always found in kimberlites on the oldest part of cratons, the stable cores of continents with typical ages of 2.5 billion years or more.[77][82]: 314 However, there are exceptions. The Argyle diamond mine in Australia, the largest producer of diamonds by weight in the world, is located in a mobile belt, also known as an orogenic belt,[83] a weaker zone surrounding the central craton that has undergone compressional tectonics. Instead of kimberlite, the host rock is lamproite. Lamproites with diamonds that are not economically viable are also found in the United States, India, and Australia.[77] In addition, diamonds in the Wawa belt of the Superior province in Canada and microdiamonds in the island arc of Japan are found in a type of rock called lamprophyre.[77]

Kimberlites can be found in narrow (1 to 4 meters) dikes and sills, and in pipes with diameters that range from about 75 m to 1.5 km. Fresh rock is dark bluish green to greenish gray, but after exposure rapidly turns brown and crumbles.[84] It is hybrid rock with a chaotic mixture of small minerals and rock fragments (clasts) up to the size of watermelons. They are a mixture of xenocrysts and xenoliths (minerals and rocks carried up from the lower crust and mantle), pieces of surface rock, altered minerals such as serpentine, and new minerals that crystallized during the eruption. The texture varies with depth. The composition forms a continuum with carbonatites, but the latter have too much oxygen for carbon to exist in a pure form. Instead, it is locked up in the mineral calcite (CaCO3).[77]

All three of the diamond-bearing rocks (kimberlite, lamproite and lamprophyre) lack certain minerals (melilite and kalsilite) that are incompatible with diamond formation. In kimberlite, olivine is large and conspicuous, while lamproite has Ti-phlogopite and lamprophyre has biotite and amphibole. They are all derived from magma types that erupt rapidly from small amounts of melt, are rich in volatiles and magnesium oxide, and are less oxidizing than more common mantle melts such as basalt. These characteristics allow the melts to carry diamonds to the surface before they dissolve.[77]

### Exploration

File:Diavik Mine.tif

Kimberlite pipes can be difficult to find. They weather quickly (within a few years after exposure) and tend to have lower topographic relief than surrounding rock. If they are visible in outcrops, the diamonds are never visible because they are so rare. In any case, kimberlites are often covered with vegetation, sediments, soils, or lakes. In modern searches, geophysical methods such as aeromagnetic surveys, electrical resistivity, and gravimetry, help identify promising regions to explore. This is aided by isotopic dating and modeling of the geological history. Then surveyors must go to the area and collect samples, looking for kimberlite fragments or indicator minerals. The latter have compositions that reflect the conditions where diamonds form, such as extreme melt depletion or high pressures in eclogites. However, indicator minerals can be misleading; a better approach is geothermobarometry, where the compositions of minerals are analyzed as if they were in equilibrium with mantle minerals.[77]

Finding kimberlites requires persistence, and only a small fraction contain diamonds that are commercially viable. The only major discoveries since about 1980 have been in Canada. Since existing mines have lifetimes of as little as 25 years, there could be a shortage of new natural diamonds in the future.[77]

### Ages

Diamonds are dated by analyzing inclusions using the decay of radioactive isotopes. Depending on the elemental abundances, one can look at the decay of rubidium to strontium, samarium to neodymium, uranium to lead, argon-40 to argon-39, or rhenium to osmium. Those found in kimberlites have ages ranging from 1 to 3.5 billion years, and there can be multiple ages in the same kimberlite, indicating multiple episodes of diamond formation. The kimberlites themselves are much younger. Most of them have ages between tens of millions and 300 million years old, although there are some older exceptions (Argyle, Premier and Wawa). Thus, the kimberlites formed independently of the diamonds and served only to transport them to the surface.[32][77] Kimberlites are also much younger than the cratons they have erupted through. The reason for the lack of older kimberlites is unknown, but it suggests there was some change in mantle chemistry or tectonics. No kimberlite has erupted in human history.[77]

### Origin in mantle

Eclogite with centimeter-size garnet crystals Red garnet inclusion in a diamond[85]

Most gem-quality diamonds come from depths of 150–250 km in the lithosphere. Such depths occur below cratons in mantle keels, the thickest part of the lithosphere. These regions have high enough pressure and temperature to allow diamonds to form and they are not convecting, so diamonds can be stored for billions of years until a kimberlite eruption samples them.[77]

Host rocks in a mantle keel include harzburgite and lherzolite, two type of peridotite. The most dominant rock type in the upper mantle, peridotite is an igneous rock consisting mostly of the minerals olivine and pyroxene; it is low in silica and high in magnesium. However, diamonds in peridotite rarely survive the trip to the surface.[77] Another common source that does keep diamonds intact is eclogite, a metamorphic rock that typically forms from basalt as an oceanic plate plunges into the mantle at a subduction zone.[32]

A smaller fraction of diamonds (about 150 have been studied) come from depths of 330–660 km, a region that includes the transition zone. They formed in eclogite but are distinguished from diamonds of shallower origin by inclusions of majorite (a form of garnet with excess silicon). A similar proportion of diamonds comes from the lower mantle at depths between 660 and 800 km.[32]

Diamond is thermodynamically stable at high pressures and temperatures, with the phase transition from graphite occurring at greater temperatures as the pressure increases. Thus, underneath continents it becomes stable at temperatures of 950 degrees Celsius and pressures of 4.5 gigapascals, corresponding to depths of 150 kilometers or greater. In subduction zones, which are colder, it becomes stable at temperatures of 800 °C and pressures of 3.5 gigapascals. At depths greater than 240 km, iron–nickel metal phases are present and carbon is likely to be either dissolved in them or in the form of carbides. Thus, the deeper origin of some diamonds may reflect unusual growth environments.[32][77]

In 2018 the first known natural samples of a phase of ice called Ice VII were found as inclusions in diamond samples. The inclusions formed at depths between 400 and 800 km, straddling the upper and lower mantle, and provide evidence for water-rich fluid at these depths.[86][87]

### Carbon sources

The mantle has roughly one billion gigatonnes of carbon (for comparison, the atmosphere-ocean system has about 44,000 gigatonnes).[88] Carbon has two stable isotopes, 12C and 13C, in a ratio of approximately 99:1 by mass.[77] This ratio has a wide range in meteorites, which implies that it also varied a lot in the early Earth. It can also be altered by surface processes like photosynthesis. The fraction is generally compared to a standard sample using a ratio δ13C expressed in parts per thousand. Common rocks from the mantle such as basalts, carbonatites, and kimberlites have ratios between −8 and −2. On the surface, organic sediments have an average of −25 while carbonates have an average of 0.[32]

Populations of diamonds from different sources have distributions of δ13C that vary markedly. Peridotitic diamonds are mostly within the typical mantle range; eclogitic diamonds have values from −40 to +3, although the peak of the distribution is in the mantle range. This variability implies that they are not formed from carbon that is primordial (having resided in the mantle since the Earth formed). Instead, they are the result of tectonic processes, although (given the ages of diamonds) not necessarily the same tectonic processes that act in the present.[77] Diamond-forming carbon originates in the top 700 kilometers (430 mi) or so of the upper mantle closest to the surface, known as the asthenosphere.[32]

### Formation and growth

Age zones in a diamond[85]

Diamonds in the mantle form through a metasomatic process where a C–O–H–N–S fluid or melt dissolves minerals in a rock and replaces them with new minerals. (The vague term C–O–H–N–S is commonly used because the exact composition is not known.) Diamonds form from this fluid either by reduction of oxidized carbon (e.g., CO2 or CO3) or oxidation of a reduced phase such as methane.[32]

Using probes such as polarized light, photoluminescence, and cathodoluminescence, a series of growth zones can be identified in diamonds. The characteristic pattern in diamonds from the lithosphere involves a nearly concentric series of zones with very thin oscillations in luminescence and alternating episodes where the carbon is resorbed by the fluid and then grown again. Diamonds from below the lithosphere have a more irregular, almost polycrystalline texture, reflecting the higher temperatures and pressures as well as the transport of the diamonds by convection.[77]

### Transport to the surface

Diagram of a volcanic pipe

Geological evidence supports a model in which kimberlite magma rises at 4–20 meters per second, creating an upward path by hydraulic fracturing of the rock. As the pressure decreases, a vapor phase exsolves from the magma, and this helps to keep the magma fluid. At the surface, the initial eruption explodes out through fissures at high speeds (over 200 m/s (450 mph)). Then, at lower pressures, the rock is eroded, forming a pipe and producing fragmented rock (breccia). As the eruption wanes, there is pyroclastic phase and then metamorphism and hydration produces serpentinites.[77]

### Double diamonds

In rare cases, diamonds have been found that contain a cavity within which is a second diamond. The first double diamond, the Matryoshka, was found by Alrosa in Yakutia, Russia, in 2019.[89] Another one was found in the Ellendale Diamond Field in Western Australia in 2021.[90]

### In space

Main article: Astronomy:Extraterrestrial diamonds

Although diamonds on Earth are rare, they are very common in space. In meteorites, about three percent of the carbon is in the form of nanodiamonds, having diameters of a few nanometers. Sufficiently small diamonds can form in the cold of space because their lower surface energy makes them more stable than graphite. The isotopic signatures of some nanodiamonds indicate they were formed outside the Solar System in stars.[91]

High pressure experiments predict that large quantities of diamonds condense from methane into a "diamond rain" on the ice giant planets Uranus and Neptune.[92][93][94] Some extrasolar planets may be almost entirely composed of diamond.[95]

Diamonds may exist in carbon-rich stars, particularly white dwarfs. One theory for the origin of carbonado, the toughest form of diamond, is that it originated in a white dwarf or supernova.[96][97] Diamonds formed in stars may have been the first minerals.[98]

## Industry

See also: Chemistry:Diamonds as an investment, List of countries by diamond production, and Clean Diamond Trade Act

A round brilliant cut diamond set in a ring

The most familiar uses of diamonds today are as gemstones used for adornment, and as industrial abrasives for cutting hard materials. The markets for gem-grade and industrial-grade diamonds value diamonds differently.

### Gem-grade diamonds

Main article: Chemistry:Diamond (gemstone)

The dispersion of white light into spectral colors is the primary gemological characteristic of gem diamonds. In the 20th century, experts in gemology developed methods of grading diamonds and other gemstones based on the characteristics most important to their value as a gem. Four characteristics, known informally as the four Cs, are now commonly used as the basic descriptors of diamonds: these are its mass in carats (a carat being equal to 0.2 grams), cut (quality of the cut is graded according to proportions, symmetry and polish), color (how close to white or colorless; for fancy diamonds how intense is its hue), and clarity (how free is it from inclusions). A large, flawless diamond is known as a paragon.[99]

A large trade in gem-grade diamonds exists. Although most gem-grade diamonds are sold newly polished, there is a well-established market for resale of polished diamonds (e.g. pawnbroking, auctions, second-hand jewelry stores, diamantaires, bourses, etc.). One hallmark of the trade in gem-quality diamonds is its remarkable concentration: wholesale trade and diamond cutting is limited to just a few locations; in 2003, 92% of the world's diamonds were cut and polished in Surat, India.[100] Other important centers of diamond cutting and trading are the Antwerp diamond district in Belgium, where the International Gemological Institute is based, London, the Diamond District in New York City, the Diamond Exchange District in Tel Aviv and Amsterdam. One contributory factor is the geological nature of diamond deposits: several large primary kimberlite-pipe mines each account for significant portions of market share (such as the Jwaneng mine in Botswana, which is a single large-pit mine that can produce between 12,500,000 and 15,000,000 carats (2,500 and 3,000 kg) of diamonds per year[101]).

The production and distribution of diamonds is largely consolidated in the hands of a few key players, and concentrated in traditional diamond trading centers, the most important being Antwerp, where 80% of all rough diamonds, 50% of all cut diamonds and more than 50% of all rough, cut and industrial diamonds combined are handled.[102] This makes Antwerp a de facto "world diamond capital".[103] The city of Antwerp also hosts the Antwerpsche Diamantkring, created in 1929 to become the first and biggest diamond bourse dedicated to rough diamonds.[104] Another important diamond center is New York City, where almost 80% of the world's diamonds are sold, including auction sales.[102]

The De Beers company, as the world's largest diamond mining company, holds a dominant position in the industry, and has done so since soon after its founding in 1888 by the British businessman Cecil Rhodes. De Beers is currently the world's largest operator of diamond production facilities (mines) and distribution channels for gem-quality diamonds. The Diamond Trading Company (DTC) is a subsidiary of De Beers and markets rough diamonds from De Beers-operated mines. De Beers and its subsidiaries own mines that produce some 40% of annual world diamond production. For most of the 20th century over 80% of the world's rough diamonds passed through De Beers,[105] but by 2001–2009 the figure had decreased to around 45%,[106] and by 2013 the company's market share had further decreased to around 38% in value terms and even less by volume.[107] De Beers sold off the vast majority of its diamond stockpile in the late 1990s – early 2000s[108] and the remainder largely represents working stock (diamonds that are being sorted before sale).[109] This was well documented in the press[110] but remains little known to the general public.

As a part of reducing its influence, De Beers withdrew from purchasing diamonds on the open market in 1999 and ceased, at the end of 2008, purchasing Russian diamonds mined by the largest Russian diamond company Alrosa.[111] As of January 2011, De Beers states that it only sells diamonds from the following four countries: Botswana, Namibia, South Africa and Canada.[112] Apart from Alrosa, other important diamond mining companies include BHP, which is the world's largest mining company;[113] Rio Tinto, the owner of the Argyle (100%), Diavik (60%), and Murowa (78%) diamond mines;[114] and Petra Diamonds, the owner of several major diamond mines in Africa.

Diamond polisher in Amsterdam

Further down the supply chain, members of The World Federation of Diamond Bourses (WFDB) act as a medium for wholesale diamond exchange, trading both polished and rough diamonds. The WFDB consists of independent diamond bourses in major cutting centers such as Tel Aviv, Antwerp, Johannesburg and other cities across the US, Europe and Asia.[45] In 2000, the WFDB and The International Diamond Manufacturers Association established the World Diamond Council to prevent the trading of diamonds used to fund war and inhumane acts. WFDB's additional activities include sponsoring the World Diamond Congress every two years, as well as the establishment of the International Diamond Council (IDC) to oversee diamond grading.[115]

Once purchased by Sightholders (which is a trademark term referring to the companies that have a three-year supply contract with DTC), diamonds are cut and polished in preparation for sale as gemstones ('industrial' stones are regarded as a by-product of the gemstone market; they are used for abrasives).[116] The cutting and polishing of rough diamonds is a specialized skill that is concentrated in a limited number of locations worldwide.[116] Traditional diamond cutting centers are Antwerp, Amsterdam, Johannesburg, New York City, and Tel Aviv. Recently, diamond cutting centers have been established in China, India, Thailand, Namibia and Botswana.[116] Cutting centers with lower cost of labor, notably Surat in Gujarat, India, handle a larger number of smaller carat diamonds, while smaller quantities of larger or more valuable diamonds are more likely to be handled in Europe or North America. The recent expansion of this industry in India, employing low cost labor, has allowed smaller diamonds to be prepared as gems in greater quantities than was previously economically feasible.[102]

Diamonds prepared as gemstones are sold on diamond exchanges called bourses. There are 28 registered diamond bourses in the world.[117] Bourses are the final tightly controlled step in the diamond supply chain; wholesalers and even retailers are able to buy relatively small lots of diamonds at the bourses, after which they are prepared for final sale to the consumer. Diamonds can be sold already set in jewelry, or sold unset ("loose"). According to the Rio Tinto, in 2002 the diamonds produced and released to the market were valued at US$9 billion as rough diamonds, US$14 billion after being cut and polished, US$28 billion in wholesale diamond jewelry, and US$57 billion in retail sales.[118]

#### Cutting

Main articles: Engineering:Diamond cutting and Diamond cut

The Daria-i-Noor Diamond—an example of unusual diamond cut and jewelry arrangement.

Mined rough diamonds are converted into gems through a multi-step process called "cutting". Diamonds are extremely hard, but also brittle and can be split up by a single blow. Therefore, diamond cutting is traditionally considered as a delicate procedure requiring skills, scientific knowledge, tools and experience. Its final goal is to produce a faceted jewel where the specific angles between the facets would optimize the diamond luster, that is dispersion of white light, whereas the number and area of facets would determine the weight of the final product. The weight reduction upon cutting is significant and can be of the order of 50%.[119] Several possible shapes are considered, but the final decision is often determined not only by scientific, but also practical considerations. For example, the diamond might be intended for display or for wear, in a ring or a necklace, singled or surrounded by other gems of certain color and shape.[120] Some of them may be considered as classical, such as round, pear, marquise, oval, hearts and arrows diamonds, etc. Some of them are special, produced by certain companies, for example, Phoenix, Cushion, Sole Mio diamonds, etc.[121]

The most time-consuming part of the cutting is the preliminary analysis of the rough stone. It needs to address a large number of issues, bears much responsibility, and therefore can last years in case of unique diamonds. The following issues are considered:

* The hardness of diamond and its ability to cleave strongly depend on the crystal orientation. Therefore, the crystallographic structure of the diamond to be cut is analyzed using X-ray diffraction to choose the optimal cutting directions.
* Most diamonds contain visible non-diamond inclusions and crystal flaws. The cutter has to decide which flaws are to be removed by the cutting and which could be kept.
* Splitting a diamond with a hammer is difficult, a well-calculated, angled blow can cut the diamond, piece-by-piece, but it can also ruin the diamond itself. Alternatively, it can be cut with a diamond saw, which is a more reliable method.[120][122]

After initial cutting, the diamond is shaped in numerous stages of polishing. Unlike cutting, which is a responsible but quick operation, polishing removes material by gradual erosion and is extremely time-consuming. The associated technique is well developed; it is considered as a routine and can be performed by technicians.[123] After polishing, the diamond is reexamined for possible flaws, either remaining or induced by the process. Those flaws are concealed through various diamond enhancement techniques, such as repolishing, crack filling, or clever arrangement of the stone in the jewelry. Remaining non-diamond inclusions are removed through laser drilling and filling of the voids produced.[41]

#### Marketing

Diamond balance scale 0.01–25 carat jeweler's measuring tool

Marketing has significantly affected the image of diamond as a valuable commodity.

N. W. Ayer & Son, the advertising firm retained by De Beers in the mid-20th century, succeeded in reviving the American diamond market and the firm created new markets in countries where no diamond tradition had existed before. N. W. Ayer's marketing included product placement, advertising focused on the diamond product itself rather than the De Beers brand, and associations with celebrities and royalty. Without advertising the De Beers brand, De Beers was advertising its competitors' diamond products as well,[124] but this was not a concern as De Beers dominated the diamond market throughout the 20th century. De Beers' market share dipped temporarily to second place in the global market below Alrosa in the aftermath of the global economic crisis of 2008, down to less than 29% in terms of carats mined, rather than sold.[125] The campaign lasted for decades but was effectively discontinued by early 2011. De Beers still advertises diamonds, but the advertising now mostly promotes its own brands, or licensed product lines, rather than completely "generic" diamond products.[125] The campaign was perhaps best captured by the slogan "a diamond is forever".[9] This slogan is now being used by De Beers Diamond Jewelers,[126] a jewelry firm which is a 50/50% joint venture between the De Beers mining company and LVMH, the luxury goods conglomerate.

Brown-colored diamonds constituted a significant part of the diamond production, and were predominantly used for industrial purposes. They were seen as worthless for jewelry (not even being assessed on the diamond color scale). After the development of Argyle diamond mine in Australia in 1986, and marketing, brown diamonds have become acceptable gems.[127][128] The change was mostly due to the numbers: the Argyle mine, with its 35,000,000 carats (7,000 kg) of diamonds per year, makes about one-third of global production of natural diamonds;[129] 80% of Argyle diamonds are brown.[130]

### Industrial-grade diamonds

A scalpel with synthetic diamond blade Close-up photograph of an angle grinder blade with tiny diamonds shown embedded in the metal A diamond knife blade used for cutting ultrathin sections (typically 70 to 350 nm) for transmission electron microscopy

Industrial diamonds are valued mostly for their hardness and thermal conductivity, making many of the gemological characteristics of diamonds, such as the 4 Cs, irrelevant for most applications. Eighty percent of mined diamonds (equal to about 135,000,000 carats (27,000 kg) annually) are unsuitable for use as gemstones and are used industrially.[131] In addition to mined diamonds, synthetic diamonds found industrial applications almost immediately after their invention in the 1950s; in 2014, 4,500,000,000 carats (900,000 kg) of synthetic diamonds were produced, 90% of which were produced in China. Approximately 90% of diamond grinding grit is currently of synthetic origin.[132]

The boundary between gem-quality diamonds and industrial diamonds is poorly defined and partly depends on market conditions (for example, if demand for polished diamonds is high, some lower-grade stones will be polished into low-quality or small gemstones rather than being sold for industrial use). Within the category of industrial diamonds, there is a sub-category comprising the lowest-quality, mostly opaque stones, which are known as bort.[133]

Industrial use of diamonds has historically been associated with their hardness, which makes diamond the ideal material for cutting and grinding tools. As the hardest known naturally occurring material, diamond can be used to polish, cut, or wear away any material, including other diamonds. Common industrial applications of this property include diamond-tipped drill bits and saws, and the use of diamond powder as an abrasive. Less expensive industrial-grade diamonds (bort) with more flaws and poorer color than gems, are used for such purposes.[134] Diamond is not suitable for machining ferrous alloys at high speeds, as carbon is soluble in iron at the high temperatures created by high-speed machining, leading to greatly increased wear on diamond tools compared to alternatives.[135]

Specialized applications include use in laboratories as containment for high-pressure experiments (see diamond anvil cell), high-performance bearings, and limited use in specialized windows.[133] With the continuing advances being made in the production of synthetic diamonds, future applications are becoming feasible. The high thermal conductivity of diamond makes it suitable as a heat sink for integrated circuits in electronics.[136]

### Mining

Approximately 130,000,000 carats (26,000 kg) of diamonds are mined annually, with a total value of nearly US$9 billion, and about 100,000 kg (220,000 lb) are synthesized annually.[137]

Roughly 49% of diamonds originate from Central and Southern Africa, although significant sources of the mineral have been discovered in Canada, India, Russia, Brazil, and Australia.[132] They are mined from kimberlite and lamproite volcanic pipes, which can bring diamond crystals, originating from deep within the Earth where high pressures and temperatures enable them to form, to the surface. The mining and distribution of natural diamonds are subjects of frequent controversy such as concerns over the sale of blood diamonds or conflict diamonds by African paramilitary groups.[138] The diamond supply chain is controlled by a limited number of powerful businesses, and is also highly concentrated in a small number of locations around the world.

Only a very small fraction of the diamond ore consists of actual diamonds. The ore is crushed, during which care is required not to destroy larger diamonds, and then sorted by density. Today, diamonds are located in the diamond-rich density fraction with the help of X-ray fluorescence, after which the final sorting steps are done by hand. Before the use of X-rays became commonplace,[119] the separation was done with grease belts; diamonds have a stronger tendency to stick to grease than the other minerals in the ore.[45]

Siberia's Udachnaya diamond mine The slightly misshapen octahedral shape of this rough diamond crystal in matrix is typical of the mineral. Its lustrous faces also indicate that this crystal is from a primary deposit

Historically, diamonds were found only in alluvial deposits in Guntur and Krishna district of the Krishna River delta in Southern India.[139] India led the world in diamond production from the time of their discovery in approximately the 9th century BC[6][140] to the mid-18th century AD, but the commercial potential of these sources had been exhausted by the late 18th century and at that time India was eclipsed by Brazil where the first non-Indian diamonds were found in 1725.[6] Currently, one of the most prominent Indian mines is located at Panna.[141]

Diamond extraction from primary deposits (kimberlites and lamproites) started in the 1870s after the discovery of the Diamond Fields in South Africa.[142] Production has increased over time and now an accumulated total of 4,500,000,000 carats (900,000 kg) have been mined since that date.[143] Twenty percent of that amount has been mined in the last five years, and during the last 10 years, nine new mines have started production; four more are waiting to be opened soon. Most of these mines are located in Canada, Zimbabwe, Angola, and one in Russia.[143]

In the U.S., diamonds have been found in Arkansas, Colorado, New Mexico, Wyoming, and Montana.[144][145] In 2004, the discovery of a microscopic diamond in the U.S. led to the January 2008 bulk-sampling of kimberlite pipes in a remote part of Montana. The Crater of Diamonds State Park in Arkansas is open to the public, and is the only mine in the world where members of the public can dig for diamonds.[145]

Today, most commercially viable diamond deposits are in Russia (mostly in Sakha Republic, for example Mir pipe and Udachnaya pipe), Botswana, Australia (Northern and Western Australia) and the Democratic Republic of the Congo.[146] In 2005, Russia produced almost one-fifth of the global diamond output, according to the British Geological Survey. Australia boasts the richest diamantiferous pipe, with production from the Argyle diamond mine reaching peak levels of 42 metric tons per year in the 1990s.[144][147] There are also commercial deposits being actively mined in the Northwest Territories of Canada and Brazil.[132] Diamond prospectors continue to search the globe for diamond-bearing kimberlite and lamproite pipes.

#### Political issues

File:Unsustainable Growth.webmUnsustainable diamond mining in Sierra Leone. Documentary as part of the Vrinda Project for Wikibooks

In some of the more politically unstable central African and west African countries, revolutionary groups have taken control of diamond mines, using proceeds from diamond sales to finance their operations. Diamonds sold through this process are known as conflict diamonds or blood diamonds.[138]

In response to public concerns that their diamond purchases were contributing to war and human rights abuses, the United Nations, the diamond industry and diamond-trading nations introduced the Kimberley Process in 2002.[148] The Kimberley Process aims to ensure that conflict diamonds do not become intermixed with the diamonds not controlled by such rebel groups. This is done by requiring diamond-producing countries to provide proof that the money they make from selling the diamonds is not used to fund criminal or revolutionary activities. Although the Kimberley Process has been moderately successful in limiting the number of conflict diamonds entering the market, some still find their way in. According to the International Diamond Manufacturers Association, conflict diamonds constitute 2–3% of all diamonds traded.[149] Two major flaws still hinder the effectiveness of the Kimberley Process: (1) the relative ease of smuggling diamonds across African borders, and (2) the violent nature of diamond mining in nations that are not in a technical state of war and whose diamonds are therefore considered "clean".[148]

The Canadian Government has set up a body known as the Canadian Diamond Code of Conduct[150] to help authenticate Canadian diamonds. This is a stringent tracking system of diamonds and helps protect the "conflict free" label of Canadian diamonds.[151]

Mineral resource exploitation in general causes irreversible environmental damage, which must be weighed against the socio-economic benefits to a country.[152]

## Synthetics, simulants, and enhancements

### Synthetics

Main article: Earth:Synthetic diamond

Synthetic diamonds are diamonds manufactured in a laboratory, as opposed to diamonds mined from the Earth. The gemological and industrial uses of diamond have created a large demand for rough stones. This demand has been satisfied in large part by synthetic diamonds, which have been manufactured by various processes for more than half a century. However, in recent years it has become possible to produce gem-quality synthetic diamonds of significant size.[76] It is possible to make colorless synthetic gemstones that, on a molecular level, are identical to natural stones and so visually similar that only a gemologist with special equipment can tell the difference.[153]

The majority of commercially available synthetic diamonds are yellow and are produced by so-called high-pressure high-temperature (HPHT) processes.[154] The yellow color is caused by nitrogen impurities. Other colors may also be reproduced such as blue, green or pink, which are a result of the addition of boron or from irradiation after synthesis.[155]

Another popular method of growing synthetic diamond is chemical vapor deposition (CVD). The growth occurs under low pressure (below atmospheric pressure). It involves feeding a mixture of gases (typically 1 to 99 methane to hydrogen) into a chamber and splitting them into chemically active radicals in a plasma ignited by microwaves, hot filament, arc discharge, welding torch, or laser.[156] This method is mostly used for coatings, but can also produce single crystals several millimeters in size (see picture).[137]

As of 2010, nearly all 5,000 million carats (1,000 tonnes) of synthetic diamonds produced per year are for industrial use. Around 50% of the 133 million carats of natural diamonds mined per year end up in industrial use.[153][157] Mining companies' expenses average 40 to 60 US dollars per carat for natural colorless diamonds, while synthetic manufacturers' expenses average $2,500 per carat for synthetic, gem-quality colorless diamonds.[153]: 79 However, a purchaser is more likely to encounter a synthetic when looking for a fancy-colored diamond because only 0.01% of natural diamonds are fancy-colored, while most synthetic diamonds are colored in some way.[158]

* Synthetic diamonds of various colors grown by the high-pressure high-temperature technique

* Colorless gem cut from diamond grown by chemical vapor deposition

### Simulants

Main article: Physics:Diamond simulant

Gem-cut synthetic silicon carbide set in a ring

A diamond simulant is a non-diamond material that is used to simulate the appearance of a diamond, and may be referred to as diamante. Cubic zirconia is the most common. The gemstone moissanite (silicon carbide) can be treated as a diamond simulant, though more costly to produce than cubic zirconia. Both are produced synthetically.[159]

### Enhancements

Main article: Chemistry:Diamond enhancement

Diamond enhancements are specific treatments performed on natural or synthetic diamonds (usually those already cut and polished into a gem), which are designed to better the gemological characteristics of the stone in one or more ways. These include laser drilling to remove inclusions, application of sealants to fill cracks, treatments to improve a white diamond's color grade, and treatments to give fancy color to a white diamond.[160]

Coatings are increasingly used to give a diamond simulant such as cubic zirconia a more "diamond-like" appearance. One such substance is diamond-like carbon—an amorphous carbonaceous material that has some physical properties similar to those of the diamond. Advertising suggests that such a coating would transfer some of these diamond-like properties to the coated stone, hence enhancing the diamond simulant. Techniques such as Raman spectroscopy should easily identify such a treatment.[161]

### Identification

Cathodoluminescence image of a diamond, taken in a scanning electron microscope

Early diamond identification tests included a scratch test relying on the superior hardness of diamond. This test is destructive, as a diamond can scratch another diamond, and is rarely used nowadays. Instead, diamond identification relies on its superior thermal conductivity. Electronic thermal probes are widely used in the gemological centers to separate diamonds from their imitations. These probes consist of a pair of battery-powered thermistors mounted in a fine copper tip. One thermistor functions as a heating device while the other measures the temperature of the copper tip: if the stone being tested is a diamond, it will conduct the tip's thermal energy rapidly enough to produce a measurable temperature drop. This test takes about two to three seconds.[162]

Whereas the thermal probe can separate diamonds from most of their simulants, distinguishing between various types of diamond, for example synthetic or natural, irradiated or non-irradiated, etc., requires more advanced, optical techniques. Those techniques are also used for some diamonds simulants, such as silicon carbide, which pass the thermal conductivity test. Optical techniques can distinguish between natural diamonds and synthetic diamonds. They can also identify the vast majority of treated natural diamonds.[163] "Perfect" crystals (at the atomic lattice level) have never been found, so both natural and synthetic diamonds always possess characteristic imperfections, arising from the circumstances of their crystal growth, that allow them to be distinguished from each other.[164]

Laboratories use techniques such as spectroscopy, microscopy, and luminescence under shortwave ultraviolet light to determine a diamond's origin.[163] They also use specially made instruments to aid them in the identification process. Two screening instruments are the DiamondSure and the DiamondView, both produced by the DTC and marketed by the GIA.[165]

Several methods for identifying synthetic diamonds can be performed, depending on the method of production and the color of the diamond. CVD diamonds can usually be identified by an orange fluorescence. D–J colored diamonds can be screened through the Swiss Gemmological Institute's[166] Diamond Spotter. Stones in the D–Z color range can be examined through the DiamondSure UV/visible spectrometer, a tool developed by De Beers.[164] Similarly, natural diamonds usually have minor imperfections and flaws, such as inclusions of foreign material, that are not seen in synthetic diamonds.

Screening devices based on diamond type detection can be used to make a distinction between diamonds that are certainly natural and diamonds that are potentially synthetic. Those potentially synthetic diamonds require more investigation in a specialized lab. Examples of commercial screening devices are D-Screen (WTOCD / HRD Antwerp), Alpha Diamond Analyzer (Bruker / HRD Antwerp), and D-Secure (DRC Techno).

## See also

* Deep carbon cycle
* Diamondoid
* List of diamonds
* List of largest rough diamonds
* List of minerals
* Superhard material

## Notes

1. ↑ The brownish hue is due to superficial ferrous impurities that constitute evidence of the geological sedimentary context in which it was found. This diamond is potentially colorless.[1]

## Citations

1. ↑ "Gold and Diamonds from Brazil". https://www.tesouroreal.pt/en/pages/b9ed8b00-ouro-e-diamantes-do-brasil.
2. ↑ 2.0 2.1 "Diamond". Mindat. https://www.mindat.org/min-1282.html.
3. ↑ "Diamond". WebMineral. http://webmineral.com/data/Diamond.shtml.
4. ↑ "IMA–CNMNC approved mineral symbols". Mineralogical Magazine 85 (3): 291–320. 2021. doi:10.1180/mgm.2021.43. ISSN 0026-461X. Bibcode: 2021MinM...85..291W.
5. ↑ "Adamas". A Greek-English Lexicon. Perseus Project. https://www.perseus.tufts.edu/cgi-bin/ptext?doc=Perseus:text:1999.04.0057:entry=#1145.
6. ↑ 6.0 6.1 6.2 The Book of Diamonds (Reprint ed.). New York: Hearthside Press. 2004. pp. 22–28. ISBN 978-1-4179-7715-4. https://books.google.com/books?id=35eij1e1al8C&pg=PA23. Retrieved November 9, 2020.
7. ↑ Pliny the Elder (2004). Natural History: A Selection. Penguin Books. p. 371. ISBN 978-0-14-044413-1.
8. ↑ "Chinese made first use of diamond". BBC News. May 17, 2005. https://news.bbc.co.uk/2/hi/science/nature/4555235.stm.
9. ↑ 9.0 9.1 "Have You Ever Tried To Sell a Diamond?". The Atlantic. 1982. https://www.theatlantic.com/issues/82feb/8202diamond1.htm.
10. ↑ See:

* "Premier mémoire sur la destruction du diamant par le feu" (in fr), Histoire de l'Académie royale des sciences, avec les Mémoires de Mathématique & de Physique, tirés des registres de cette Académie (Académie des sciences): pp. 564–591, October 15, 2007, ark:/12148/bpt6k35711, ISSN 1967-4783, http://gallica.bnf.fr/ark:/12148/bpt6k35711/f739.image, retrieved July 1, 2022
* "Second mémoire sur la destruction du diamant par le feu" (in fr), Histoire de l'Académie royale des sciences, avec les Mémoires de Mathématique & de Physique, tirés des registres de cette Académie (Académie des sciences): pp. 591–616, October 15, 2007, ark:/12148/bpt6k35711, ISSN 1967-4783, http://gallica.bnf.fr/ark:/12148/bpt6k35711/f766.image, retrieved July 1, 2022

11. ↑ "On the nature of the diamond". Philosophical Transactions of the Royal Society of London 87: 123–127. 1797. doi:10.1098/rstl.1797.0005. https://books.google.com/books?id=vlBFAAAAcAAJ&pg=PA123. Retrieved July 1, 2022.
12. ↑ 12.0 12.1 The diamond makers. Cambridge University Press. 1999. pp. 7–10. ISBN 978-0-521-65474-6. https://books.google.com/books?id=fNJQok6N9_MC&pg=PA7.
13. ↑ "Polymorphism of carbon". Graphite and precursors. Gordon & Breach. 2000. pp. 1–24. ISBN 978-90-5699-228-6.
14. ↑ Handbook of carbon, graphite, diamond, and fullerenes: properties, processing, and applications. Noyes Publications. 2012. pp. 40–41. ISBN 978-0-8155-1739-9.
15. ↑ "Structure and thermochemistry of diamond". The physics of diamond. IOS Press. 1997. pp. 9–30. ISBN 978-1-61499-220-2.
16. ↑ 16.0 16.1 Chemical Thermodynamics. University Science Books. 1983. pp. 257–260. ISBN 978-1-891389-32-0.
17. ↑ "Gone in a Flash". Popular Science. October 8, 2009. https://www.popsci.com/diy/article/2009-08/burn-diamonds-torch-and-liquid-oxygen/. Retrieved October 31, 2018.
18. ↑ Chen, Y.; Zhang, L. (2013). Polishing of diamond materials: mechanisms, modeling and implementation. Springer Science & Business Media. pp. 1–2. ISBN 978-1-84996-408-1.
19. ↑ J.H. Eggert; et al. (Nov 8, 2009). "Melting temperature of diamond at ultrahigh pressure". Nature Physics. 6 (1): 40–43. Bibcode:2010NatPh...6...40E. doi:10.1038/nphys1438.
20. ↑ 20.0 20.1 "The pressure-temperature phase and transformation diagram for carbon; updated through 1994". Carbon 34 (2): 141–153. 1996. doi:10.1016/0008-6223(96)00170-4. Bibcode: 1996Carbo..34..141B.
21. ↑ "Thermodynamic and kinetic approaches of diamond and related nanomaterials formed by laser ablation in liquid". Laser ablation in liquids: principles and applications in the preparation of nanomaterials. Pan Stanford. 2012. pp. 164–165. ISBN 978-981-4241-52-6.
22. ↑ 22.0 22.1 Baird, Christopher S. (December 17, 2013). "Why do diamonds last forever?". West Texas A&M University. https://www.wtamu.edu/~cbaird/sq/2013/12/17/why-do-diamonds-last-forever/.
23. ↑ O'Bannon, E.; Xia, G.; Shi, F.; Wirth, R.; King, A.; Dobrzhinetskaya, L. (2020). "The transformation of diamond to graphite: Experiments reveal the presence of an intermediate linear carbon phase". Diamond and Related Materials 108. doi:10.1016/j.diamond.2020.107876. Bibcode: 2020DRM...10807876O. https://www.osti.gov/servlets/purl/1631913.
24. ↑ "Carbon phase diagram from ab initio molecular dynamics". Physical Review Letters 95 (18). October 2005. doi:10.1103/PhysRevLett.95.185701. PMID 16383918. Bibcode: 2005PhRvL..95r5701W.
25. ↑ "Carbon under extreme conditions: phase boundaries and electronic properties from first-principles theory". Proceedings of the National Academy of Sciences of the United States of America 103 (5): 1204–1208. January 2006. doi:10.1073/pnas.0510489103. PMID 16432191. Bibcode: 2006PNAS..103.1204C.
26. ↑ "Diamond oceans possible on Uranus, Neptune". Discovery News. January 15, 2010. http://news.discovery.com/space/diamond-oceans-jupiter-uranus.html.
27. ↑ "Diamond: Molten under pressure". Nature Physics 6 (1): 9–10. 2010. doi:10.1038/nphys1491. Bibcode: 2010NatPh...6....9S. http://nrs.harvard.edu/urn-3:HUL.InstRepos:9121282. Retrieved November 9, 2020.
28. ↑ Materials science. Tata McGraw-Hill Pub. 2004. p. 2.16. ISBN 978-0-07-058369-6.
29. ↑ 29.0 29.1 Solid state physics. Holt, Rinehart and Winston. 1976. p. 76. ISBN 978-0-03-083993-1. https://archive.org/details/solidstatephysic00ashc/page/76.
30. ↑ "Molecular models of porous carbons". Chemistry and physics of carbon. 28. Marcel Dekker. 2003. pp. 46–47. ISBN 978-0-8247-0987-7.
31. ↑ Gems: Their sources, descriptions and identification (5th ed.). Great Britain: Butterworth-Heinemann. 2000. p. 17. ISBN 978-0-7506-1674-4.
32. ↑ 32.00 32.01 32.02 32.03 32.04 32.05 32.06 32.07 32.08 32.09 32.10 "Diamond Formation: A Stable Isotope Perspective". Annual Review of Earth and Planetary Sciences 42 (1): 699–732. May 30, 2014. doi:10.1146/annurev-earth-042711-105259. Bibcode: 2014AREPS..42..699C.
33. ↑ "High spatial resolution photoluminescence and Raman spectroscopic measurements of a natural polycrystalline diamond, carbonado". Diamond and Related Materials 14 (11–12): 1950–1954. November 2005. doi:10.1016/j.diamond.2005.08.046. Bibcode: 2005DRM....14.1950F.
34. ↑ "Poly (ADP-ribose) polymerase mediates diabetes-induced retinal neuropathy". Mediators of Inflammation 2013 (2). 2006. doi:10.1086/510451. PMID 24347828. Bibcode: 2006ApJ...653L.153G.
35. ↑ "Diamonds from Outer Space: Geologists Discover Origin of Earth's Mysterious Black Diamonds". National Science Foundation. January 8, 2007. https://www.nsf.gov/news/news_summ.jsp?cntn_id=108270&org=NSF.
36. ↑ "Diamonds Are Indestructible, Right?" (in en-US). December 16, 2015. https://dominionjewelers.com/diamonds-are-indestructible-right/.
37. ↑ "The abrasion of diamond". Proceedings of the Royal Society A 248 (1254): 379–393. November 25, 1958. doi:10.1098/rspa.1958.0250. Bibcode: 1958RSPSA.248..379S.
38. ↑ "The wear and care of records and styli". April 13, 2021. https://service.shure.com/s/article/stylus-wear-and-record-wear?language=en_US.
39. ↑ Properties, Growth and Applications of Diamond. Institution of Engineering and Technology. 2001. pp. 142–147. ISBN 978-0-85296-785-0. https://books.google.com/books?id=jtC1mUFZfQcC&pg=PA143. Retrieved November 9, 2020.
40. ↑ "Diamonds on Demand". Smithsonian 39 (3): 52–59. 2008. http://www.smithsonianmag.com/science-nature/diamonds-on-demand.html. Retrieved June 13, 2009.
41. ↑ 41.0 41.1 Gemmology. Butterworth-Heinemann. 2005. pp. 165–166. ISBN 978-0-7506-6449-3. https://books.google.com/books?id=t-OQO3Wk-JsC&pg=PA166. Retrieved November 9, 2020.
42. ↑ Synthetic, Imitation and Treated Gemstones. Gulf Professional. 1997. pp. 34–37. ISBN 978-0-7506-3173-0. https://books.google.com/books?id=Jm3FwBiHaI4C&pg=PA37.
43. ↑ Innovative superhard materials and sustainable coatings for advanced manufacturing. Springer. 2005. p. 102. ISBN 978-0-8493-3512-9. https://books.google.com/books?id=EXGcDYj8HvEC&pg=PA102.
44. ↑ Handbook of ceramic grinding and polishing. William Andrew. 2000. p. 21. ISBN 978-0-8155-1424-4. https://books.google.com/books?id=QCvqtRJJ4XwC&pg=PA21.
45. ↑ 45.0 45.1 45.2 45.3 45.4 45.5 The nature of diamonds. Cambridge University Press. 1998. pp. 223, 230–249. ISBN 978-0-521-62935-5. https://books.google.com/books?id=_WI86J88ydAC&pg=PA223.
46. ↑ "The strength of diamond". Applied Physics Letters 87 (14). October 3, 2005. doi:10.1063/1.2061853. Bibcode: 2005ApPhL..87n1902E.
47. ↑ 47.0 47.1 "Implementation of micro-ball nanodiamond anvils for high-pressure studies above 6 Mbar". Nature Communications 3 (1). October 23, 2012. doi:10.1038/ncomms2160. PMID 23093199. Bibcode: 2012NatCo...3.1163D.
48. ↑ 48.0 48.1 "Improved diamond anvil cell allows higher pressures than ever before". Physics World. Nature Communications. November 2, 2012. http://physicsworld.com/cws/article/news/2012/nov/02/improved-diamond-anvil-cell-allows-higher-pressures-than-ever-before.
49. ↑ "Achieving large uniform tensile elasticity in microfabricated diamond". Science 371 (6524): 76–78. January 2021. doi:10.1126/science.abc4174. PMID 33384375. Bibcode: 2021Sci...371...76D.
50. ↑ "Ultralarge elastic deformation of nanoscale diamond". Science 360 (6386): 300–302. April 2018. doi:10.1126/science.aar4165. PMID 29674589. Bibcode: 2018Sci...360..300B.
51. ↑ "On the quest for the strongest materials". Science 360 (6386): 264–265. April 2018. doi:10.1126/science.aat5211. PMID 29674578. Bibcode: 2018Sci...360..264L.
52. ↑ "The Optical and Electronic Properties of Semiconducting Diamond". Philosophical Transactions of the Royal Society A 342 (1664): 233–244. 1993. doi:10.1098/rsta.1993.0017. Bibcode: 1993RSPTA.342..233C.
53. ↑ "Resistivity of chemical vapor deposited diamond films". Applied Physics Letters 55 (10): 975–977. 1989. doi:10.1063/1.101694. Bibcode: 1989ApPhL..55..975L.
54. ↑ "Hydrogen-terminated diamond electrodes. II. Redox activity". Physical Review E 78 (4 Pt 1). October 2008. doi:10.1103/PhysRevE.78.041603. PMID 18999435. Bibcode: 2008PhRvE..78d1603Z.
55. ↑ "Metallization of diamond". Proceedings of the National Academy of Sciences of the United States of America 117 (40): 24634–24639. October 2020. doi:10.1073/pnas.2013565117. PMID 33020306. Bibcode: 2020PNAS..11724634S.
56. ↑ "Two-inch diamond wafers could store a billion Blu-Ray's worth of data" (in en-US). April 28, 2022. https://newatlas.com/electronics/2-inch-diamond-wafers-quantum-memory-billion-blu-rays/.
57. ↑ "Diamond stabilization of ice multilayers at human body temperature". Physical Review E 76 (2 Pt 1). 27 August 2007. doi:10.1103/physreve.76.020501. PMID 17929997. Bibcode: 2007PhRvE..76b0501W. http://www.alexwg.org/link?url=http://www.alexwg.org/publications/PhysRevERapidComm_76-020501.pdf.
58. ↑ "Origins of sp(3)C peaks in C1s X-ray Photoelectron Spectra of Carbon Materials". Analytical Chemistry 88 (12): 6110–6114. June 2016. doi:10.1021/acs.analchem.6b01327. PMID 27264720. Bibcode: 2016AnaCh..88.6110F.
59. ↑ Precious Stones. 1. Dover Publications. 2012. pp. 115–117. ISBN 978-0-486-15125-0.
60. ↑ "Diamond Care and Cleaning Guide" (in en). Gemological Institute of America. https://www.gia.edu/diamond-care-cleaning.
61. ↑ "Diamonds are Flammable! How to Safeguard Your Jewelry". August 27, 2016. http://www.dmia.net/diamonds-are-flammable/.
62. ↑ "Can you light diamond on fire?". https://wtamu.edu/~cbaird/sq/2014/03/27/can-you-light-diamond-on-fire/.
63. ↑ "Colored Sparks". European Journal of Inorganic Chemistry 2019 (7): 928–937. February 21, 2019. doi:10.1002/ejic.201801300. Bibcode: 2019EJIC.2019..928L.
64. ↑ "Correlation between optical absorption and EPR in high-pressure diamond grown from a nickel solvent catalyst". Diamond and Related Materials 7 (2–5): 333–338. 1998. doi:10.1016/S0925-9635(97)00270-7. Bibcode: 1998DRM.....7..333C.
65. ↑ "Vibronic spectra of impurity-related optical centers in diamond". Physical Review B 61 (19): 12909–12922. 2000. doi:10.1103/PhysRevB.61.12909. Bibcode: 2000PhRvB..6112909Z.
66. ↑ "Optical absorption and luminescence in diamond". Reports on Progress in Physics 42 (10): 1605–1659. 1979. doi:10.1088/0034-4885/42/10/001. Bibcode: 1979RPPh...42.1605W. http://accreditedgemologists.org/lightingtaskforce/OpticalAbsorptionand.pdf.
67. ↑ "Origin of brown coloration in diamond". Physical Review B 73 (12). 2006. doi:10.1103/PhysRevB.73.125203. Bibcode: 2006PhRvB..73l5203H.
68. ↑ Secrets Of The Gem Trade, The Connoisseur's Guide To Precious Gemstones. Brunswick House Press. 2001. pp. 223–224. ISBN 978-0-9728223-8-1.
69. ↑ "Blue-grey diamond belonging to King of Spain has sold for record 16.3 GBP". The Daily Telegraph (London). December 10, 2008. https://www.telegraph.co.uk/culture/3703861/Blue-grey-diamond-belonging-to-King-of-Spain-has-sold-for-record-16.3m.html. GBP&rft.jtitle=The+Daily+Telegraph&rft.date=December+10,+2008&rft.place=London&rft_id=https://www.telegraph.co.uk/culture/3703861/Blue-grey-diamond-belonging-to-King-of-Spain-has-sold-for-record-16.3m.html&rfr_id=info:sid/en.wikibooks.org:Chemistry:Diamond">
70. ↑ "Rare blue diamond sells for record $9.5 million". Reuters. May 12, 2009. https://www.reuters.com/article/artsNews/idUSTRE54B6O020090512.
71. ↑ "Vivid pink diamond sells for record $10.8 million". Reuters. December 1, 2009. https://www.reuters.com/article/idUSTRE5B02P620091201.
72. ↑ "Objective ciamond clarity grading". Journal of Gemmology 34 (4): 316–332. 2014. doi:10.15506/JoG.2014.34.4.316. Bibcode: 2014JGem...34..316C. https://acagemlab.com/wp-content/uploads/2019/01/JoG2014_34_4_Cowing_Obj_Diamond_Clarity-1.pdf. Retrieved September 19, 2021.
73. ↑ "Inclusion extraction from diamond clarity images based on the analysis of diamond optical properties". Optics Express 27 (19): 27242–27255. September 2019. doi:10.1364/OE.27.027242. PMID 31674589. Bibcode: 2019OExpr..2727242W.
74. ↑ "Fact Checking Diamond Fluorescence: 11 Myths Dispelled" (in en-US). March 27, 2018. https://4cs.gia.edu/en-us/blog/fact-checking-diamond-fluorescence-myths-dispelled/.
75. ↑ "Thermal conductivity of isotopically modified single crystal diamond". Physical Review Letters 70 (24): 3764–3767. June 1993. doi:10.1103/PhysRevLett.70.3764. PMID 10053956. Bibcode: 1993PhRvL..70.3764W.
76. ↑ 76.0 76.1 76.2 Diamond deposits: origin, exploration, and history of discovery. Littleton, CO: Society for Mining, Metallurgy, and Exploration. 2002. ISBN 978-0-87335-213-0.
77. ↑ 77.00 77.01 77.02 77.03 77.04 77.05 77.06 77.07 77.08 77.09 77.10 77.11 77.12 77.13 77.14 77.15 77.16 77.17 "Recent Advances in Understanding the Geology of Diamonds". Gems & Gemology 49 (4): 188–222. December 1, 2013. doi:10.5741/GEMS.49.4.188.
78. ↑ The Mantle and Core. Elsevier. 2005. p. 248. ISBN 978-0-08-044848-0. https://books.google.com/books?id=1clZ4ABsfoAC&pg=PA248. Retrieved November 9, 2020.
79. ↑ "Popigai, Siberia—well preserved giant impact structure, national treasury, and world's geological heritage". Episodes 23 (1): 3–12. 2000. doi:10.18814/epiiugs/2000/v23i1/002.
80. ↑ "How do diamonds form? They don't form from coal!". Geology and Earth Science News and Information. geology.com. 2012. http://geology.com/articles/diamonds-from-coal/.
81. ↑ "10 common scientific misconceptions". The Christian Science Monitor. October 31, 2013. https://www.csmonitor.com/Science/2013/1031/10-common-scientific-misconceptions/Diamonds-form-from-pressurized-coal. Retrieved August 30, 2017.
82. ↑ Economic Geology: Principles and Practice. John Wiley & Sons. 2011. ISBN 978-1-4443-9486-3.
83. ↑ "mobile belt". A dictionary of geology and earth sciences (4th ed.). Oxford: Oxford University Press. 2013. ISBN 978-0-19-174433-4.
84. ↑ "Kimberlite pipe models: significance for exploration". Proceedings of Exploration 07: Fifth Decennial International Conference on Mineral Exploration. Decennial Mineral Exploration Conferences, 2007. 2007. pp. 667–677. http://www.dmec.ca/ex07-dvd/E07/pdfs/46.pdf. Retrieved March 1, 2018.
85. ↑ 85.0 85.1 Deep Carbon Observatory (2019). Deep Carbon Observatory: A Decade of Discovery. Washington, DC: Deep Carbon Observatory Secretariat. doi:10.17863/CAM.44064. https://deepcarbon.net/deep-carbon-observatory-decade-discovery. Retrieved December 13, 2019.
86. ↑ "Diamond Impurities Reveal Water Deep Within the Mantle". Eos 99. April 2, 2018. doi:10.1029/2018EO095949.
87. ↑ "Pockets of water may lie deep below Earth's surface". Science. March 8, 2018. https://www.science.org/content/article/pockets-water-may-lay-deep-below-earth-s-surface. Retrieved June 30, 2022.
88. ↑ "A Framework for Understanding Whole-Earth Carbon Cycling". Deep carbon: past to present. Cambridge University Press. 2019. pp. 313–357. doi:10.1017/9781108677950.011. ISBN 978-1-108-67795-0.
89. ↑ "Bizarre 'nesting doll' diamond found inside another diamond". National Geographic. October 10, 2019. https://www.nationalgeographic.com/science/article/rare-diamond-diamond-found-siberia.
90. ↑ "Rare 'double diamond' discovery comes as race to restart mothballed Ellendale mine heats up". Australian Broadcasting Corporation. November 26, 2021. https://www.abc.net.au/news/2021-11-26/ellendale-discovery-comes-as-race-to-restart-production-heats-up/100648088.
91. ↑ "The molecular universe". Reviews of Modern Physics 85 (3): 1021–1081. July 12, 2013. doi:10.1103/RevModPhys.85.1021. Bibcode: 2013RvMP...85.1021T.
92. ↑ "Neptune may crush methane into diamonds". Science 286 (5437): 25. October 1999. doi:10.1126/science.286.5437.25a. PMID 10532884.
93. ↑ "The Centers of Planets: In laboratories and computers, shocked and squeezed matter turns metallic, coughs up diamonds and reveals Earth's white-hot center". American Scientist 91 (6): 516–525. November–December 2003. doi:10.1511/2003.38.905. Bibcode: 2003AmSci..91..516S.
94. ↑ "It rains solid diamonds on Uranus and Neptune". The Washington Post. August 25, 2017. https://www.washingtonpost.com/news/speaking-of-science/wp/2017/08/25/it-rains-solid-diamonds-on-uranus-and-neptune/.
95. ↑ Max Planck Institute for Radio Astronomy (August 25, 2011). "A planet made of diamond". Astronomy magazine. http://www.astronomy.com/news/2011/08/a-planet-made-of-diamond.
96. ↑ "Strange Diamonds: the Mysterious Origins of Carbonado and Framesite". Elements 1 (2): 85–89. 2005. doi:10.2113/gselements.1.2.85. Bibcode: 2005Eleme...1...85H.
97. ↑ "A "diamond-like star" in the lab. Diamond-like glass". Carbon 100: 703–709. April 2016. doi:10.1016/j.carbon.2016.01.068. Bibcode: 2016Carbo.100..703S.
98. ↑ "Life and Rocks May Have Co-Evolved on Earth" (in en). Smithsonian. http://www.smithsonianmag.com/science-nature/life-and-rocks-may-have-co-evolved-on-earth-180957807/.
99. ↑ Jewelrymaking through history. Greenwood Publishing Group. 2007. p. 42. ISBN 978-0-313-33507-5. https://books.google.com/books?id=DIWEi5Hg93gC&pg=PA42. Retrieved November 9, 2020.
100. ↑ "Uncommon Brilliance". Time. April 12, 2004. http://www.time.com/time/magazine/article/0,9171,501040419-610100,00.html.
101. ↑ "Jwaneng". Debswana. http://www.debswana.com/Operations/Pages/Jwaneng.aspx.
102. ↑ 102.0 102.1 102.2 Russia's Diamond Colony: The Republic of Sakha. Routledge. 2000. p. 254. ISBN 978-90-5702-420-7. https://books.google.com/books?id=F7N4G_wxkUYC. Retrieved November 9, 2020.
103. ↑ "Jews Surrender Gem Trade to Indians". Spiegel Online. May 15, 2006. http://www.spiegel.de/international/spiegel/0,1518,416243,00.html.
104. ↑ "The history of the Antwerp Diamond Center". August 16, 2012. https://www.awdc.be/en/20th-century.
105. ↑ "Commission Decision of 25 July 2001 declaring a concentration to be compatible with the common market and the EEA Agreement". Case No COMP/M.2333 – De Beers/LVMH. EUR-Lex. 2003. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CELEX:32003D0079:EN:HTML.
106. ↑ "Business: Changing facets; Diamonds". The Economist 382 (8517): p. 68. 2007. https://www.economist.com/business/2007/02/22/changing-facets.
107. ↑ "Certainty in the Diamond Industry? Watch Out For Tipping Points – IDEX's Memo". idexonline.com. http://www.idexonline.com/portal_FullEditorial.asp?id=38357.
108. ↑ "The Elusive Sparcle". The Gem & Jewellery Export Promotion Council. http://www.gjepc.org/solitaire/magazines/Aug05_Sep05/aug05_sep05.aspx?inclpage=Specials&section_id=3.
109. ↑ "Crisis Mitigation at De Beers". DIB online. November 6, 2008. http://www.docstoc.com/docs/19770902/Crisis-Mitigation-at-De-Beers.
110. ↑ "De Beers to Halve Diamond Stockpile". National Jeweler. November 3, 1999. http://www.allbusiness.com/retail-trade/apparel-accessory-stores-womens-specialty/4224156-1.html.
111. ↑ "Judgment of the Court of First Instance of 11 July 2007 – Alrosa v Commission". EUR-Lex. 2007. http://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:C2007/199/70.
112. ↑ "Mining operations". The De Beers Group. 2007. http://www.debeersgroup.com/en/Exploration-and-mining/Mining-operations/.
113. ↑ "Another record profit for BHP". ABC News. August 22, 2007. http://www.abc.net.au/news/stories/2007/08/22/2012367.htm.
114. ↑ "Our Companies". Rio Tinto web site. Rio Tinto. http://www.riotinto.com/whatweproduce/218_our_companies.asp.
115. ↑ "Introduction | IDC" (in en). https://internationaldiamondcouncil.org/introduction.
116. ↑ 116.0 116.1 116.2 Africa's silk road. World Bank Publications. 2007. pp. 297–299. ISBN 978-0-8213-6835-0. https://books.google.com/books?id=fkBJ0HL34WsC&pg=PA297. Retrieved November 9, 2020.
117. ↑ "Bourse listing". World Federation of Diamond Bourses. http://www.wfdb.com/wfdb-bourses.
118. ↑ "North America Diamond Sales Show No Sign of Slowing". A&W diamonds. http://www.awdiamonds.com/article-8.html.
119. ↑ 119.0 119.1 Handbook of carbon, graphite, diamond, and fullerenes: properties, processing, and applications. William Andrew. 1993. p. 280. ISBN 978-0-8155-1339-1. https://books.google.com/books?id=jPT6JADCqgwC&pg=PA280.
120. ↑ 120.0 120.1 Antique jewellery: its manufacture, materials and design. Osprey Publishing. 1998. pp. 82–102. ISBN 978-0-7478-0385-0.
121. ↑ "The Classical and Special Shapes of Diamonds". kristallsmolensk.com. http://www.kristallsmolensk.com/backstage/benchmarks/shapes/.
122. ↑ Handbook of industrial diamonds and diamond films. CRC Press. 1998. pp. 984–992. ISBN 978-0-8247-9994-6. https://books.google.com/books?id=X3qe9jzYUAQC&pg=PA984. Retrieved November 9, 2020.
123. ↑ "Gem Cutting". Popular Mechanics 74 (5): 760–764. 1940. ISSN 0032-4558. https://books.google.com/books?id=i9kDAAAAMBAJ&pg=PA760. Retrieved November 9, 2020.
124. ↑ "Keep the Diamond Dream Alive". http://www.diamonds.net/news/NewsItem.aspx?ArticleID=33243.
125. ↑ 125.0 125.1 JCK Staff (January 26, 2011). "10 Things Rocking the Industry". http://www.jckonline.com/2011/01/26/10-things-rocking-industry.
126. ↑ "Interview with Forevermark CEO". January 14, 2011. http://www.jckonline.com/blogs/cutting-remarks/2011/01/14/interview-forevermark-ceo.
127. ↑ The nature of diamonds. Cambridge University Press. 1998. p. 34. ISBN 978-0-521-62935-5. https://books.google.com/books?id=_WI86J88ydAC&pg=PA34.
128. ↑ Industrial minerals & rocks. Society for Mining, Metallurgy, and Exploration (U.S.). 2006. p. 416. ISBN 978-0-87335-233-8. https://books.google.com/books?id=zNicdkuulE4C&pg=PA416.
129. ↑ "The Australian Diamond Industry". http://www.costellos.com.au/diamonds/industry.html.
130. ↑ Diamond deposits: origin, exploration, and history of discovery. SME. 2002. p. 158. ISBN 978-0-87335-213-0. https://books.google.com/books?id=068-M3xrDSQC&pg=PT158.
131. ↑ "Diamond: The mineral Diamond information and pictures". minerals.net. http://www.minerals.net/mineral/diamond.aspx.
132. ↑ 132.0 132.1 132.2 "Industrial Diamonds Statistics and Information". United States Geological Survey. http://minerals.usgs.gov/minerals/pubs/commodity/diamond/.
133. ↑ 133.0 133.1 Synthetic Diamond: Emerging CVD Science and Technology. Wiley–IEEE. 1994. p. 628. ISBN 978-0-471-53589-8. https://books.google.com/books?id=RR5HF25DB7UC.
134. ↑ Turning And Mechanical Manipulation. Holtzapffel & Co. 1846. pp. 176–178. https://archive.org/details/turningandmecha01holtgoog.
135. ↑ "The application of polycrystalline diamond (PCD) tool materials when drilling and reaming aluminum-based alloys including MMC". International Journal of Machine Tools and Manufacture 35 (5): 761–774. 1995. doi:10.1016/0890-6955(95)93044-7.
136. ↑ "120 W CW output power from monolithic AlGaAs (800 nm) laser diode array mounted on diamond heatsink". Electronics Letters 28 (2): 197–199. 1992. doi:10.1049/el:19920123. Bibcode: 1992ElL....28..197S.
137. ↑ 137.0 137.1 "The Many Facets of Man-Made Diamonds". Chemical and Engineering News 82 (5): 26–31. 2004. doi:10.1021/cen-v082n005.p026. http://pubs.acs.org/cen/coverstory/8205/8205diamonds.html. Retrieved October 3, 2006.
138. ↑ 138.0 138.1 "Conflict Diamonds". United Nations. March 21, 2001. https://www.un.org/peace/africa/Diamond.html.
139. ↑ The Diamond. John Lane Co.. 1911. p. 159.
140. ↑ "1". Diamonds, Gold and Coal of India. London: Trübner & Co. 1881. p. 1. https://archive.org/details/diamondscoalgold00ballrich. Ball was a geologist in British service.
141. ↑ "Biggest diamond found in Panna". Mail Today. July 1, 2010. http://www.9newz.com/mail-today-biggest-diamond-found-in-panna.
142. ↑ Encyclopedia of African history. CRC Press. 2005. p. 767. ISBN 978-1-57958-453-5. https://books.google.com/books?id=Ftz_gtO-pngC&pg=PA767. Retrieved November 9, 2020.
143. ↑ 143.0 143.1 "Global Rough Diamond Production Since 1870". Gems & Gemology 43 (2): 98–119. 2007. doi:10.5741/GEMS.43.2.98. Bibcode: 2007GemG...43...98J.
144. ↑ 144.0 144.1 "Argyle in Western Australia: The world's richest diamantiferous pipe; its past and future". Gemmologie, Zeitschrift der Deutschen Gemmologischen Gesellschaft 56 (1–2): 35–40. 2007.
145. ↑ 145.0 145.1 "Microscopic diamond found in Montana". The Montana Standard. October 17, 2004. http://www.montanastandard.com/articles/2004/10/18/featuresbusiness/hjjfijicjbhdjc.txt.
146. ↑ "The Diamond Life". Guerrilla News Network. 2004. http://gnn.tv/videos/2/The_Diamond_Life.
147. ↑ "Discovery and Mining of the Argyle Diamond Deposit, Australia". Gems & Gemology 37 (1): 26–41. 2001. doi:10.5741/GEMS.37.1.26. Bibcode: 2001GemG...37...26S. http://www.argylediamonds.com.au/docs/gems_and_gemology.pdf. Retrieved February 20, 2010.
148. ↑ 148.0 148.1 Resource politics in Sub-Saharan Africa. GIGA-Hamburg. 2005. pp. 305–313. ISBN 978-3-928049-91-7. https://books.google.com/books?id=hWrEcl2ydzEC&pg=PA305. Retrieved November 9, 2020.
149. ↑ World Federation of Diamond Bourses (WFDB) and International Diamond Manufacturers Association: Joint Resolution of 19 July 2000. World Diamond Council. July 19, 2000. ISBN 978-90-04-13656-4. https://books.google.com/books?id=fnRnyS7I9cYC&pg=PA334. Retrieved November 5, 2006.
150. ↑ "Voluntary Code of Conduct For Authenticating Canadian Diamond Claims". Canadian Diamond Code Committee. 2006. http://www.canadiandiamondcodeofconduct.ca/images/EN_CDCC_Committee_Procedures.pdf.
151. ↑ "Diamonds in Canada". Gems and Gemology 38 (3): 208–238. 2002. doi:10.5741/GEMS.38.3.208. Bibcode: 2002GemG...38..208K.
152. ↑ A meta-analysis of the environmental impact specific to diamond mining is in  ﻿Environmental Impacts of Mined Diamonds﻿ (Report). Imperial College London Consultants. https://www.imperial-consultants.co.uk/wp-content/uploads/2021/02/Final-report-Environmental-Impacts-of-Mined-Diamonds-updated-8-21.pdf. Retrieved July 1, 2022.
153. ↑ 153.0 153.1 153.2 "The Global Diamond Industry: Lifting the Veil of Mystery". Bain & Company. http://www.bain.com/Images/PR_BAIN_REPORT_The_global_diamond_industry.pdf.
154. ↑ "Gemesis Laboratory Created Diamonds". Gems & Gemology 38 (4): 301–309. 2002. doi:10.5741/GEMS.38.4.301. Bibcode: 2002GemG...38..301S.
155. ↑ "Lab Grown Colored Diamonds from Chatham Created Gems". Gems & Gemology 40 (2): 128–145. 2004. doi:10.5741/GEMS.40.2.128. Bibcode: 2004GemG...40..128S.
156. ↑ "Growth and application of undoped and doped diamond films". Reports on Progress in Physics 61 (12): 1665–1710. 1998. doi:10.1088/0034-4885/61/12/002. Bibcode: 1998RPPh...61.1665W.
157. ↑ "The Business of Diamonds, From Mining to Retail". CNBC. August 27, 2012. https://www.cnbc.com/2012/08/27/the-billion-dollar-business-of-diamonds-from-mining-to-retail.html.
158. ↑ Industrial Minerals & Rocks. SME. 2006. pp. 426–430. ISBN 978-0-87335-233-8. https://books.google.com/books?id=zNicdkuulE4C&pg=PA428. Retrieved November 9, 2020.
159. ↑ Identification of gemstones. Great Britain: Butterworth-Heinemann. 2003. pp. 12–19. ISBN 978-0-7506-5512-5.
160. ↑ The diamond formula. Butterworth-Heinemann. 2000. p. 115. ISBN 978-0-7506-4244-6. https://books.google.com/books?id=kCc80Q4gzSgC&pg=PA115. Retrieved November 9, 2020.
161. ↑ "Observations on new coated gemstones". Gemmologie: Zeitschrift der Deutschen Gemmologischen Gesellschaft 56 (1–2): 53–56. 2007.
162. ↑ Wenckus JF, "Method and means of rapidly distinguishing a simulated diamond from natural diamond", US patent 4488821, published December 18, 1984, assigned to Ceres Electronics Corporation; U.S. Patent 4,488,821
163. ↑ 163.0 163.1 Raman spectroscopy in archaeology and art history. Royal Society of Chemistry. 2005. pp. 387–394. ISBN 978-0-85404-522-8. https://books.google.com/books?id=W2cSkEsWbSkC&pg=PA387. Retrieved November 9, 2020.
164. ↑ 164.0 164.1 "Identification of Synthetic Diamonds: Present Status and Future Developments, Proceedings of the 4th International Gemological Symposium". Gems and Gemology 42 (3): 34–35. 2006.
165. ↑ "DTC Appoints GIA Distributor of DiamondSure and DiamondView". Professional Jeweler Magazine. April 19, 2004. http://www.professionaljeweler.com/archives/news/2004/041904story.html.
166. ↑ "SSEF diamond spotter and SSEF illuminator". SSEF Swiss Gemmological Institute. http://dkamhi.com/ssef type IIa.htm.

## General and cited references

* From Mine to Mistress: Corporate Strategies and Government Policies in the International Diamond Industry (2nd ed.). Mining Journal Press. 2007. http://www.mine2mistress.com/. Retrieved April 18, 2007.
* Properties and growth of diamond. INSPEC. 1994. ISBN 978-0-85296-875-8.
* Gems. Elsevier. 2006. ISBN 978-0-7506-5856-0.
* Identification of gemstones. Great Britain: Butterworth-Heinemann. 2003. ISBN 978-0-7506-5512-5.
* Applications of Diamond Films and Related Materials. Elsevier. 1991. ISBN 978-1-48329124-6.
* The Properties of Diamond. London: Academic Press. 1979. ISBN 978-0-12-255350-9.
* The Properties of Natural and Synthetic Diamond. London: Academic Press. 1992. ISBN 978-0-12-255352-3.
* The Book of Diamonds (Reprint ed.). Hearthside Press New York. 2004. ISBN 978-1-4179-7715-4. http://www.farlang.com/diamonds/hershey-diamond-chapters/page_001. Retrieved August 18, 2011.
* Physics and Applications of CVD Diamond. Wiley VCH. 2008. ISBN 978-3-527-40801-6. https://books.google.com/books?id=pRFUZdHb688C. Retrieved November 9, 2020.
* Diamond: Electronic Properties and Applications. Kluwer Academic Publishers. 1995. ISBN 978-0-7923-9524-9. https://books.google.com/books?id=ZtfFEoXkU8wC&pg=PP1.
* Diamond Grading ABC: the Manual. Antwerp: Rubin & Son. 2001. ISBN 978-3-9800434-6-5.
* Chemistry and physics of carbon: a series of advances. New York: Marcel Dekker. 1965. ISBN 978-0-8247-0987-7.
* Diamond Design: A Study of the Reflection and Refraction of Light in a Diamond. London: E. & F.N. Spon. 1919. http://www.folds.net/diamond/index.html. Retrieved March 13, 2007.
* Secrets of the Gem Trade: The Connoisseur's Guide to Precious Gemstones (Second ed.). Brunswick House Press. 2016. ISBN 978-0-9728223-2-9. http://secretsofthegemtrade.com/. Retrieved May 11, 2021.
* Optical Properties of Diamond: A Data Handbook. Springer. 2001. ISBN 978-3-540-66582-3. https://books.google.com/books?id=msU4jkdCEhIC&pg=PP1. Retrieved November 9, 2020.

## Further reading

* "Have You Ever Tried to Sell a Diamond?". The Atlantic Monthly. February 1982. https://www.theatlantic.com/doc/198202/diamond. Retrieved January 2, 2023.
* "Diamonds in the Sky". Nova. PBS. November 2000. https://www.pbs.org/wgbh/nova/diamond/sky.html.

## External links

| The Wikibook Development Cooperation Handbook has a page on the topic of: Unsustainable Growth

|

* Properties of diamond: Ioffe database
* ""A Contribution to the Understanding of Blue Fluorescence on the Appearance of Diamonds"". Gemological Institute of America (GIA). 2007. https://www.gia.edu/doc/A-Contribution-to-Understanding-the-Effect-of-Blue-Fluorescence-on-the-Appearance-of-Diamonds.

* v
* t
* e

Allotropes of carbon

sp3 forms|

* Diamond (cubic)
* Lonsdaleite (hexagonal diamond)

sp2 forms|

* Graphite
* Graphene
* Fullerenes, including C60 (buckminsterfullerene), C70, Fullerene whiskers, Nanotubes, Nanobuds, Nanoscrolls)
* Glassy carbon

sp forms|

* Linear acetylenic carbon
* C18 (cyclo[18]carbon)

mixed sp3/sp2 forms|

* Amorphous carbon
* Carbon nanofoam
* Carbide-derived carbon
* Q-carbon

other forms|

* C1 (atomic carbon)
* C2 (diatomic carbon)
* C3 (tricarbon)

hypothetical forms|

* C3 (cyclopropatriene)
* C6 (benzotriyne)
* C6 (prismane C8)
* Chaoite
* Haeckelites
* Cubic carbon
* Metallic carbon
* Penta-graphene

related|

* Activated carbon
* Carbon black
* Charcoal
* Carbon fiber
* Aggregated diamond nanorod

* v
* t
* e

Jewellery

Forms|

* Anklet
* Barrette
* Belt buckle
* Belly chain
* Bindi
* Bolo tie
* Bracelet
* Brooch
* Chatelaine
* Collar pin
* Crown
* Cufflink
* Earring
* Ferronnière
* Lapel pin
* Necklace
* Pectoral
* Pendant
* Ring
* Tiara
* Tie chain
* Tie clip
* Tie pin
* Toe ring
* Watch
* pocket
* strap

Making|

| People|

* Bench jeweler
* Clockmaker
* Goldsmith
* Silversmith
* Jewelry designer
* Lapidary
* Watchmaker

|

Processes|

* Carving
* Casting
* centrifugal
* lost-wax
* vacuum
* Enameling
* Engraving
* Filigree
* Kazaziye
* Metal clay
* Plating
* Polishing
* Repoussé and chasing
* Soldering
* Stonesetting
* Wire sculpture
* Wire wrapped jewelry

Tools|

* Draw plate
* File
* Hammer
* Mandrel
* Pliers

Materials|

| Precious metals|

* Gold
* Palladium
* Platinum
* Rhodium
* Silver

|

Precious metal alloys|

* Britannia silver
* Colored gold
* Crown gold
* Electrum
* Shakudō
* Shibuichi
* Sterling silver
* Argentium sterling silver
* Tumbaga

Base metals|

* Brass
* Bronze
* Copper
* Nickel silver (alpac(c)a)
* Mokume-gane
* Pewter
* Pinchbeck
* Stainless steel
* Titanium
* Tungsten

Mineral gemstones|

* Aventurine
* Agate
* Amazonite
* Amethyst
* Beryl
* Carnelian
* Chrysoberyl
* Chrysocolla
* Diamond
* Diopside
* Emerald
* Fluorite
* Garnet
* Howlite
* Jade
* Jasper
* Kyanite
* Labradorite
* Lapis lazuli
* Larimar
* Malachite
* Marcasite
* Moonstone
* Obsidian
* Onyx
* Opal
* Peridot
* Prasiolite
* Quartz
* Ruby
* Sapphire
* Sodalite
* Spinel
* Sunstone
* Tanzanite
* Tiger's eye
* Topaz
* Tourmaline
* Turquoise
* Variscite
* Zircon

Organic gemstones|

* Abalone
* Amber
* Ammolite
* Copal
* Coral
* Precious coral
* Black coral
* Ivory
* Jet
* Nacre
* Operculum
* Pearl
* Tortoiseshell

Other natural objects|

* Bezoar
* Bog-wood
* Ebonite (vulcanite)
* Gutta-percha
* Hair
* Shell jewelry
* Spondylus shell
* Toadstone

Terms|

* Carat (mass)
* Carat (purity)
* Finding
* Millesimal fineness
* Art jewelry

Related topics
Body piercing
Fashion
Gemology
Phaleristics
Metalworking
Wearable art

* v
* t
* e

Gemstones

Gemmological classifications by E. Ya. Kievlenko (1980), updated

Jewelry stones|

| 1st order|

* Diamond
* Ruby
* Emerald
* Blue Sapphire
* Alexandrite
* Natural marine pearls

|

2nd order|

* Pink sapphire
* Demantoid
* Tsavorite
* Spinel
* Precious Black Opal
* Tanzanite

3rd order|

* Yellow, Green, Violet Sapphires
* Aquamarine
* Orange topaz (Imperial)
* Rubellite
* Precious White and Fire Opal

4th order|

* Tourmaline — Verdelite
* Indicolite, polychromous
* Beryl]] — Heliodor, pink, yellow-green
* Topaz yellow, blue, pink
* Peridot
* Garnets — Spessartine (malaya), Rhodolite, Almandine, Pyrope
* Amethyst
* Citrine
* Blue Turquoise

Jewelry-Industrial
stones|

| 1st order|

* Lazurite
* Jadeite
* Nephrite
* Malachite
* Amber (Baltic amber)
* Chrysoprase
* Charoite

|

2nd order|

* Agate
* Amazonite
* Rhodonite
* Colorless, smoky and pink quartz
* Hematite
* Common opal
* Opaque iridescent feldspars

Industrial stones|

* Jasper
* Graphic granite
* Petrified wood
* Cacholong (Porouse opal)
* Marble onyx
* Obsidian
* Listwanite (green mica)
* Jet
* Selenite
* Fluorite
* Serpentinite
* Aventurine quartzite
* Ophicalcite (Serpentine/Calcite)
* Pagodite (Pyrophyllite/Talc)

Template:Mohs

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Diamond. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Diamond&oldid=4380625"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template