Impurity

Short description: Substance within a material that differs from its chemical composition

In chemistry and materials science, impurities are chemical substances inside a confined amount of liquid, gas, or solid, which differ from the chemical composition of the material or compound.[1] Firstly, a pure chemical should appear thermodynamically in at least one chemical phase and can also be characterized by its one-component-phase diagram. Secondly, practically speaking, a pure chemical should prove to be homogeneous (i.e., will show no change of properties after undergoing a wide variety of consecutive analytical chemical procedures). The perfect pure chemical will pass all attempts and tests of further separation and purification. Thirdly, and here we focus on the common chemical definition, it should not contain any trace of any other kind of chemical species. In reality, there are no absolutely 100% pure chemical compounds, as there is always some minute contamination. Indeed, as detection limits in analytical chemistry decrease, the number of impurities detected tends to increase.[2]

Impurities are either naturally occurring or added during synthesis of a chemical or commercial product. During production, impurities may be purposely, accidentally, inevitably, or incidentally added into the substance.

The levels of impurities in a material are generally defined in relative terms. Standards have been established by various organizations that attempt to define the permitted levels of various impurities in a manufactured product. Strictly speaking, then a material's level of purity can only be stated as being more or less pure than some other material.

## Contents

* 1 Destructive impurities
* 2 Impurities and nucleation
* 3 See also
* 4 References

## Destructive impurities

Impurities can be destructive when they obstruct the working nature of the material. Examples include ash and debris in metals and leaf pieces in blank white papers. The removal of impurities is usually done chemically. For example, in the manufacturing of iron, calcium carbonate is added to the blast furnace to remove silicon dioxide from the iron ore. Zone refining is an economically important method for the purification of semiconductors.

However, some kinds of impurities can be removed by physical means. A mixture of water and salt can be separated by distillation, with water as the distillate and salt as the solid residue. Impurities are usually physically removed from liquids and gases. Removal of sand particles from metal ore is one example with solids.

No matter what method is used, it is usually impossible to separate an impurity completely from a material. The reason that it is impossible to remove impurities completely is of thermodynamic nature and is predicted by the second law of thermodynamics. Removing impurities completely means reducing their concentration to zero. This would require an infinite amount of work and energy as predicted by the second law of thermodynamics. What technicians can do is to increase the purity of a material to as near 100% as possible or economically feasible.

Impurities in pharmaceuticals and therapeutics are of special concern and the last couple of decades have witnessed a fair number of scandals, from insecure ingredients and incorrect dosage forms to intentionally fortified medications and accidental contaminations.[2]

## Impurities and nucleation

When an impure liquid is cooled to its melting point the liquid, undergoing a phase transition, crystallizes around the impurities and becomes a crystalline solid. If there are no impurities then the liquid is said to be pure and can be supercooled below its melting point without becoming a solid. This occurs because the liquid has nothing to condense around so the solid cannot form a natural crystalline solid. The solid is eventually formed when dynamic arrest or glass transition occurs, but it forms into an amorphous solid – a glass, instead, as there is no long-range order in the structure.

Impurities play an important role in the nucleation of other phase transitions. For example, the presence of foreign elements may have important effects on the mechanical and magnetic properties of metal alloys. Iron atoms in copper cause the renowned Kondo effect where the conduction electron spins form a magnetic bound state with the impurity atom. Magnetic impurities in superconductors can serve as generation sites for vortex defects. Point defects can nucleate reversed domains in ferromagnets and dramatically affect their coercivity. In general impurities are able to serve as initiation points for phase transitions because the energetic cost of creating a finite-size domain of a new phase is lower at a point defect. In order for the nucleus of a new phase to be stable, it must reach a critical size. This threshold size is often lower at an impurity site.

## See also

* Dross
* Fineness
* Pollution
* Semiconductor
* Slag
* Spin wave

## References

1. ↑ "Impurity definition". 4 August 2023. https://www.merriam-webster.com/dictionary/impurity.
2. ↑ 2.0 2.1 Abdin, Ahmad Yaman; Yeboah, Prince; Jacob, Claus (January 2020). "Chemical Impurities: An Epistemological Riddle with Serious Side Effects" (in en). International Journal of Environmental Research and Public Health 17 (3): 1030. doi:10.3390/ijerph17031030. PMID 32041209.

* Longman's English-Chinese Dictionary of Chemistry, Hong Kong, 1997.
* Cheng, E. et al., Chemistry – A Modern View, Aristo-Wilson, Hong Kong, 2004

* v
* t
* e

Combined substance use and adulteration

Combined substance use|

* Active metabolite
* Codrug
* Combination drug
* Combined drug intoxication
* Drug interaction
* Poly drug use
* Polypharmacy
* Polysubstance dependence
* Prodrug
* Synergy

Adulteration|

* Contamination
* Clandestine chemistry
* Cutting agent
* Diluent
* Impurity
* Lacing
* Mickey Finn

Harm reduction|

* Pill testing
* Reagent testing

ru:Примесь (металлургия)

0.00

(0 votes)

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Impurity&oldid=3869883"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template