Porcelain tile

Short description: Type of tile commonly used to cover floors and walls

"Glazed tile" and "glazed tiles" redirect here. For roofing material used in China, see Chinese glazed roof tile.

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)

This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (March 2024) (Learn how and when to remove this template message)

|

(Learn how and when to remove this template message)

Hand-painted Chinese porcelain tiles on the floor of a Jewish synagogue in Cochin, Kerala, India

Porcelain tiles are a dense, vitrified ceramic tiles characterised by a water absorption less 0.5 per cent. Modern standards include ISO 13006 and BS EN 14411.[1][2] Unlike other ceramic tiles porcelain tiles are engineered to achieve a near-total elimination of internal porosity through a combintion of raw material selection, high-pressure mechanical shaping and high-temperature firing.[3]

Historically, porcelain was not a common material for tiles, which were much more often made of terracotta or stoneware. The first porcelain tiles were made in China, and were largely used for decorating walls, such as in the 15th-century Porcelain Tower of Nanjing (largely destroyed during Taiping Rebellion but recently reconstructed); the use of porcelain tile as wall decoration long remained typical. In Europe, palaces also occasionally featured a few rooms with walls decorated in porcelain plaques, often with forms in high relief. These were manufactured by Capodimonte porcelain and Real Fábrica del Buen Retiro, among others. Historically, porcelain was too expensive for most tiling purposes, but it is now much cheaper and is widely used.

Modern porcelain tiles can often reach 1,600 x 3,200 mm, with specialist manufacturers achieving 1,840 x 3,300 mm.[4][5][6]

## Contents

* 1 Production
* 1.1 Formulation
* 1.2 Shaping process
* 1.3 Firing
* 2 Production locations
* 3 Use
* 3.1 Polished porcelain tiles
* 4 Installation
* 4.1 Cutting
* 4.2 Adhesives
* 4.3 Tile profiles and trims
* 4.4 Sealing
* 4.5 Innovation
* 5 See also
* 6 References

## Production

### Formulation

​The performance characteristics of porcelain are dictated by the ratio of refractory and fluxing minerals. A modern body typically consists of the following dry-weight proportions:[7]

* Kaolin and ball clay (40% – 50%): these hydrous aluminium silicates provide the necessary plasticity for the shaping phase. Kaolin ensures a light-coloured fired body while ball clay contributes to "green strength", allowing the unfired tile to maintain its shape during transport.
* Feldspar (35% – 45%): primarily potassium or sodium-rich minerals. Feldspar acts as a fluxing agent; during firing, it melts into a liquid glass phase that fills the interstitial spaces between the more stable minerals.[8]
* Quartz (10% – 15%): a filler that remains largely inert. It provides a structural framework that prevents the tile from deforming or excessive shrinkage when the other components liquefy.
* Metallic oxides (< 5%): including iron, manganese and cobalt, these are used as pigments in through-body porcelain tiles to ensure colour uniformity throughout the entire cross-section of the material.

### Shaping process

​A dust-pressing method is used, which can be summarised as:[9]

* Wet milling: the raw materials are loaded into large ball mills, rotating horizontal cylinders filled with high-density alumina grinding media. Water and deflocculants are added to create a liquid slurry.[10]
* Granulation by spray drying: ehe slurry is pumped into the top of a spray drying tower and atomised through high-pressure nozzles into a stream of hot air. As the droplets fall, the water evaporates, leaving behind uniform, spherical granules.[11] The granules are collected at the base of the tower with a controlled moisture content of 4% to 7%. This residual moisture acts as a lubricant during the pressing stage, allowing the particles to slide past one another and pack tightly without leaving air pockets.

### Firing

​The pressed tiles are subject to a high temperature firing process to induce permanent chemical and physical transformations. Key stages include:

* Vitrification: the tiles are processed through a roller kiln at peak temperatures around 1,200°C. At this temperature, the feldspar undergoes a phase change into a viscous liquid.[12]
* Pore occlusion: through capillary action, this liquid glass phase fills the microscopic pores between the quartz and clay particles. As the temperature rises, the liquid phase increases in volume and decreases in viscosity, effectively "self-sealing" the material's internal structure.
* Cooling and solidification: upon cooling, this liquid solidifies into a glass-like matrix. The resulting material is a monolithic, chemically inert and frost-resistant slab with superior mechanical properties compared to traditional ceramic tiles.[13][14]

## Production locations

Large-scale production of porcelain tile is undertaken in many countries, with the major producers being China, Italy, India, Spain and Turkey. Smaller scale production is found in many other countries.[15][16] The global ceramic and porcelain tile industry was valued at approximately $251 billion in 2023 and is projected to reach $333 billion by 2032, reflecting steady growth and widespread demand across residential and commercial sectors.[17]

## Use

Porcelain tiles are significantly harder and more abrasion resistant than other types of ceramic tiles and consequently are often selected for more challenging environments.[18]

The wear rating of the tile can be graded from zero to five according to methods defined in ISO 10545-7 and ASTM C1027 for surface abrasion resistance of glazed tile, and this can be used to determine suitability for various end-use conditions.[19][20][21][22]

Modern polished porcelain floor tiles in a large format

### Polished porcelain tiles

Polished porcelain tiles have a high-lustre, reflective upper surface through a mechanical grinding process rather than the application of a glaze. Buffing the tile surface with diamond-tipped discs results in smooth, glass-like texture.[23] While this process enhances the material's aesthetic appeal and light-reflecting properties, making it a popular choice for high-end residential and commercial interiors, the grinding action may simultaneously open microscopic pores on the surface, rendering the tile more susceptible to deep-seated staining unless treated with a penetrating sealant.[24] It possesses a lower coefficient of friction and requires more diligent maintenance compared to its glazed counterparts.[25]

## Installation

### Cutting

Manual cutting methods, such as scoring and splitting, can also be used for porcelain paving slabs. This process involves marking the cutting line, scoring it with a chisel and hammer, and deepening the groove until the slab can be split cleanly.[26][27]

### Adhesives

Specialized cement is necessary for installation of porcelain tiles, and in the US specifications, are set by the Tile Council of America[28] and supported by the Tile Contractors Association. Porcelain, being denser and heavier than ordinary ceramic tiles, needs a stronger adhesive to hold the weight on walls. Therefore, typical ready-mix adhesives are not recommended for porcelain. Standard adhesives used for porcelain tiles often include cement, redispersible polymers such as ethylene-vinyl acetate, silica sand, and additives like cellulose ethers, which enhance adhesion, flexibility, and durability.[29]

### Tile profiles and trims

Ceramic tile trims and profiles are specialized edging or transitional pieces that are used in conjunction with ceramic tiles. They serve several purposes:

1. Edge protection: Profiles protect the edges of tiles from chipping and wear.
2. Transition: They provide a smooth transition between different surface materials or tile heights.
3. Aesthetic enhancement: Profiles add a finished look, contributing to the overall design of the tiled area.

Transition profiles are used when there are two different types of flooring or tiles that meet in the middle. A transition profile can help create a smooth and seamless transition between the two. Tile trims are used to cover the edges of tiles, creating a finished look and protecting them from damage.

Profiles and trims are generally installed at the same time that the tiles are laid down.

### Sealing

When porcelain is first made, it is not absorbent, but the polishing process for making the unglazed surface shiny cuts into the surface, leaving it more porous and prone to absorbing stains, in the same way as natural stone tiles. Unless they have a suitable, long-lasting treatment applied by the manufacturer, polished porcelain tiles may need sealing to make the maintenance of paving easier. Porcelain sealants are either solvent-based or water-based, which is cheaper but does not last.

### Innovation

Recent advancements in porcelain tile manufacturing have focused on both performance and safety. Manufacturers now offer tiles with anti-slip finishes designed to increase traction in wet or outdoor environments. Additionally, antimicrobial surface treatments can be applied to inhibit the growth of bacteria and mold, making porcelain tiles more hygienic and suitable for high-traffic or moisture-prone areas.[30]

## See also

* Ceramic tile cutter
* Thinset mortar
* Thick bed mortar

## References

1. ↑ International Organization for Standardization. (2018). ISO 13006:2018 — Ceramic tiles — Definitions, classification, characteristics and marking.
2. ↑ Dondi, M., Ercolani, G., Guarini, G. and Raimondo, M. (1999). Orimulsion fly ash in ceramic body mixes. Part 1: Influence on the technological properties of porcelain stoneware. British Ceramic Transactions.
3. ↑ Zanelli, C., Raimondo, M., Guarini, G. and Dondi, M. (2011). The vitrification path of porcelain stoneware tiles: Proxies for quantifying the fired porosity. Ceramics International.
4. ↑ Optimum Surfaces. (2024). Large porcelain slabs: Dimensions 1840x3300mm. https://optimumsurfaces.com/en/large-porcelain-slabs/
5. ↑ Marca Corona. (2025). Large porcelain stoneware slabs: large sizes renew design. https://www.marcacorona.it/en/technical-solutions/large-porcelain-stoneware-slabs/
6. ↑ Adila Ceramic. (2023). How big are porcelain slabs? https://adilaceramic.com/pages/how-big-are-porcelain-slabs
7. ↑ Carty, W. M. and Senapati, U. (1998). Porcelain—Raw Materials, Processing, Phase Evolution, and Mechanical Behavior. Journal of the American Ceramic Society.
8. ↑ Heimann, R. B. (2010). Classic and Advanced Ceramics: From Fundamentals to Applications. Wiley-VCH.
9. ↑ Sacmi Imola. (2002). Technology for the production of ceramic tiles. Editrice La Mandragora.
10. ↑ Sacmi Imola. (2002). Technology for the production of ceramic tiles. Editrice La Mandragora.
11. ↑ Biffi, G. (2003). Porcelain Stoneware: Production Guide. Gruppo Editoriale Faenza Editrice.
12. ↑ Martín-Marquez, J., Rincón, J. M. and Romero, M. (2008). Effect of microstructure on mechanical properties of porcelain stoneware. Journal of the European Ceramic Society.
13. ↑ Biffi, G. (2003). Porcelain Stoneware: Production Guide. Gruppo Editoriale Faenza Editrice.
14. ↑ Manfredini, T. and Hanuskova, M. (2012). Natural raw materials in the production of porcelain stoneware tiles. Key Engineering Materials.
15. ↑ Barba, A., et al. (1997). Materia prima para la fabricación de soportes de baldosas cerámicas. Instituto de Tecnología Cerámica.
16. ↑ Meyer, C. (2009). The Green Building Movement: Believers, Profits, and the Transformation of the Building Industry. Journal of the American Ceramic Society.
17. ↑ "Ceramic and Porcelain Tiles Market Size, Share, Forecast 2032". https://www.zionmarketresearch.com/report/ceramic-and-porcelain-tiles-market.
18. ↑ Tucci, A., Esposito, L., Rastelli, E. and Palmonari, C. (2007). The mechanical properties of porcelain stoneware tiles. Journal of the European Ceramic Society.
19. ↑ International Organization for Standardization. (1996). ISO 10545-7:1996 — Ceramic tiles — Part 7: Determination of resistance to surface abrasion for glazed tiles.
20. ↑ ASTM International. (2019). ASTM C1027-19 — Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile.
21. ↑ Aparicio, J., Moreno, A., Silva, G. and Ortiz, J. (2011). Review of the methods for determining the surface abrasion resistance of glazed ceramic tiles. Journal of the European Ceramic Society.
22. ↑ Esposito, L., Tucci, A. and Naldi, D. (2004). The surface hardness of ceramic tiles. Journal of the European Ceramic Society.
23. ↑ Niro Granite. (2021). How are porcelain tiles produced? Niro Ceramic Group. https://www.nirogranite.com/how-are-porcelain-tiles-produced/
24. ↑ Sánchez, E., García-Ten, J., Sanz, V., & Moreno, A. (2006). "Characteristics of pores responsible for staining of polished porcelain tile." Journal of the European Ceramic Society, 26(16), 3667-3675. doi:10.1016/j.jeurceramsoc.2005.12.012
25. ↑ CUSTOM Building Products. (2014). Technical Bulletin: Pre-Sealing Polished Porcelain Tile Before Grouting. Technical Services Department. Available at: https://www.custombuildingproducts.com/reference-library/technical-bulletins/
26. ↑ "How to Cut Porcelain Tile - The Spruce". https://www.thespruce.com/how-to-cut-porcelain-tile-7566131.
27. ↑ "How to Cut Paving Slabs: Best Methods for Cutting Paving Slabs". https://www.pavedirect.co.uk/blog/how-to-cut-paving-slabs-best-methods-for-perfect-cuts.
28. ↑ "The Tile Council of North America". http://www.tcnatile.com/.
29. ↑ Ingraham, Nicole E. (2021). "Ceramic tile production and health effects: a review". Heliyon 7 (11). doi:10.1016/j.heliyon.2021.e08411. PMID 34841113.
30. ↑ "Taking the Reins With Tech-Driven Innovation". 22 January 2025. https://www.fcnews.net/2025/01/tile-taking-the-reins-with-tech-driven-innovation/.

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Porcelain tile. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Porcelain_tile&oldid=4310110"