Titanium

Titanium is a chemical element; it has symbol Ti and atomic number 22\. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength that is resistant to corrosion in sea water, aqua regia, and chlorine.

Titanium was discovered in Cornwall, Great Britain, by William Gregor in 1791 and was named by Martin Heinrich Klaproth after the Titans of Greek mythology. The element occurs within a number of minerals, principally rutile and ilmenite, which are widely distributed in the Earth's crust and lithosphere; it is found in almost all living things, as well as bodies of water, rocks, and soils.[1] The metal is extracted from its principal mineral ores by the Kroll and Hunter processes.[2] The most common compound, titanium dioxide (TiO2), is a popular photocatalyst and is used in the manufacture of white pigments.[3] Other compounds include titanium tetrachloride (TiCl4), a component of smoke screens and catalysts; and titanium trichloride (TiCl3), which is used as a catalyst in the production of polypropylene.[1]

Titanium can be alloyed with iron, aluminium, vanadium, and molybdenum, among other elements. The resulting titanium alloys are strong, lightweight, and versatile, with applications including aerospace (jet engines, missiles, and spacecraft), military, industrial processes (chemicals and petrochemicals, desalination plants, pulp, and paper), automotive, agriculture (farming), sporting goods, jewelry, and consumer electronics.[1] Titanium is also considered one of the most biocompatible metals, leading to a range of medical applications including prostheses, orthopedic implants, dental implants, and surgical instruments.[4]

The two most useful properties of the metal are its corrosion resistance and tensile-strength-to-density ratio, the highest of any metallic element,[5] although resistance to tensile stress does not mean it has the highest ratio for other stresses: bulk compression, shear, and pressure wave. In its unalloyed condition, titanium is as tensile-strong as some steels, but less dense.[6] There are two allotropic forms[7] and five naturally occurring isotopes of this element, 46Ti through 50Ti, with 48Ti being the most abundant (73.8%).[8]

## Contents

* 1 Characteristics
* 1.1 Physical properties
* 1.2 Chemical properties
* 1.3 Occurrence
* 1.4 Isotopes
* 2 Compounds
* 2.1 Oxides, sulfides, and alkoxides
* 2.2 Nitrides and carbides
* 2.3 Halides
* 2.4 Organometallic complexes
* 3 History
* 4 Production
* 4.1 Mineral beneficiation processes
* 4.2 Purification processes
* 4.2.1 Hunter process
* 4.2.2 Kroll process
* 4.2.3 Arkel-Boer process
* 4.2.4 Armstrong process
* 4.2.5 Other processes
* 4.3 Fabrication
* 4.3.1 Titanium alloys
* 4.3.2 Forming and forging
* 5 Applications
* 5.1 Pigments, additives, and coatings
* 5.2 Aerospace and marine
* 5.3 Industrial
* 5.4 Consumer and architectural
* 5.5 Jewelry
* 5.6 Medical
* 5.6.1 Anticancer therapy studies
* 5.7 Nuclear waste storage
* 6 Hazards and safety
* 7 Function in plants
* 8 See also
* 9 Footnotes
* 10 References
* 11 Bibliography
* 12 External links

## Characteristics

### Physical properties

<section begin=properties/> As a metal, titanium is recognized for its high strength-to-weight ratio.[7] It is a strong metal with low density that is quite ductile (especially in an oxygen-free environment),[1] lustrous, and metallic-white in color.[9] Due to its relatively high melting point (1,668 °C or 3,034 °F) it has sometimes been described as a refractory metal, but this is not the case.[10] It is paramagnetic and has fairly low electrical and thermal conductivity compared to other metals.[1] Titanium is superconducting when cooled below its critical temperature of 0.49 K.[11][12]<section end=properties/>

Commercially pure (99.2% pure) grades of titanium have ultimate tensile strength of about 434 MPa (63,000 psi), equal to that of common, low-grade steel alloys, but are less dense. Titanium is 60% denser than aluminium, but more than twice as strong[6] as the most commonly used 6061-T6 aluminium alloy. Certain titanium alloys (e.g., Beta C) achieve tensile strengths of over 1,400 MPa (200,000 psi).[13] However, titanium loses strength when heated above 430 °C (806 °F).[14]

Titanium is not as hard as some grades of heat-treated steel; it is non-magnetic and a poor conductor of heat and electricity. Machining requires precautions, because the material can gall unless sharp tools and proper cooling methods are used. Like steel structures, those made from titanium have a fatigue limit that guarantees longevity in some applications.[9]

The metal is a dimorphic allotrope of a hexagonal close packed α form that changes into a body-centered cubic (lattice) β form at 882 °C (1,620 °F).[14][15] The specific heat of the α form increases dramatically as it is heated to this transition temperature but then falls and remains fairly constant for the β form regardless of temperature.[14]

### Chemical properties

Pourbaix diagram for titanium in pure water, perchloric acid, or sodium hydroxide[16]

Like aluminium and magnesium, the surface of titanium metal and its alloys oxidizes immediately upon exposure to air to form a thin non-porous passivation layer that protects the bulk metal from further oxidation or corrosion.[1] When it first forms, this protective layer is only 1–2 nm thick, but it continues to grow slowly, reaching a thickness of 25 nm in four years.[17] This layer gives titanium excellent resistance to corrosion against oxidizing acids, but it will dissolve in dilute hydrofluoric acid, hot hydrochloric acid, and hot sulfuric acid.[18]

Titanium is capable of withstanding attack by dilute sulfuric and hydrochloric acids at room temperature, chloride solutions, and most organic acids.[2] However, titanium is corroded by concentrated acids.[19] Titanium burns in normal air at temperatures lower than its melting point, so melting the metal is possible only in an inert atmosphere or vacuum.[2] At room temperature, titanium is fairly inert to halogens, but will violently combine with chlorine and bromine at 550 °C (1,022 °F) to form titanium tetrachloride and titanium tetrabromide, respectively.[18]

Titanium readily reacts with oxygen at 1,200 °C (2,190 °F) in air, and at 610 °C (1,130 °F) in pure oxygen, forming titanium dioxide.[7] This oxide is also formed by reaction between titanium and pure oxygen at room temperature and pressure of 25 bars (2,500 kPa).[18] Titanium is one of the few elements that burns in pure nitrogen gas, reacting at 800 °C (1,470 °F) to form titanium nitride, which causes embrittlement.[20]

### Occurrence

Titanium is the ninth-most abundant element in Earth's crust (0.63% by mass)[21] and the seventh-most abundant metal. It is present as oxides in most igneous rocks, in sediments derived from them, in living things, and natural bodies of water.[1][2] Of the 801 types of igneous rocks analyzed by the United States Geological Survey, 784 contained titanium. Its proportion in soils is approximately 0.5–1.5%.[21]

Common titanium-containing minerals are anatase, brookite, ilmenite, perovskite, rutile, and titanite (sphene).[17] Akaogiite is an extremely rare mineral consisting of titanium dioxide. Of these minerals, only rutile and ilmenite have economic importance, yet even they are difficult to find in high concentrations. About 6.0 and 0.7 million tonnes of those minerals were mined in 2011, respectively.[22] Significant titanium-bearing ilmenite deposits exist in Australia, Canada, China, India, Mozambique, New Zealand, Norway, Sierra Leone, South Africa, and Ukraine.[17] Total reserves of anatase, ilmenite, and rutile are estimated to exceed 2 billion tonnes.[22]

The concentration of titanium is about 4 picomolar in the ocean. At 100 °C, the concentration of titanium in water is estimated to be less than 10−7 M at pH 7. The identity of titanium species in aqueous solution remains unknown because of its low solubility and the lack of sensitive spectroscopic methods, although only the 4+ oxidation state is stable in air. No evidence exists for a biological role, although rare organisms are known to accumulate high concentrations of titanium.[23]

Titanium is contained in meteorites, and it has been detected in the Sun and in M-type stars[2] (the coolest type) with a surface temperature of 3,200 °C (5,790 °F).[24] Rocks brought back from the Moon during the Apollo 17 mission are composed of 12.1% TiO2.[2] Native titanium is only found in rocks that have been exposed to pressures between roughly 2.8 to 4.0 gigapascal on Earth,[25] but it has been identified in nanocrystals on the Moon.[26]

### Isotopes

Main article: Physics:Isotopes of titanium

Naturally occurring titanium is composed of five stable isotopes: 46Ti, 47Ti, 48Ti, 49Ti, and 50Ti, with 48Ti being the most abundant (73.8% natural abundance). Twenty-three radioisotopes have been characterized,[lower-alpha 1] the most stable of which are 44Ti with a half-life of 63 years; 45Ti, 184.8 minutes; 51Ti, 5.76 minutes; and 52Ti, 1.7 minutes. All other radioactive isotopes have half-lives less than 33 seconds, with the majority less than half a second.[8][27]

The isotopes of titanium range from 39Ti to 66Ti.[29][28] The primary decay mode for isotopes lighter than 46Ti is positron emission (with the exception of 44Ti which undergoes electron capture), leading to isotopes of scandium, and the primary mode for isotopes heavier than 50Ti is beta emission, leading to isotopes of vanadium.[8] Titanium becomes radioactive upon bombardment with deuterons, emitting mainly positrons and hard gamma rays.[2]

## Compounds

See also the categories Titanium compounds and Titanium minerals

See also: Chemistry:Titanium alloy

A titanium nitride-coated drill bit

The +4 oxidation state dominates titanium chemistry,[30] but compounds in the +3 oxidation state are also numerous.[31] Commonly, titanium adopts an octahedral coordination geometry in its complexes,[32][33] but tetrahedral TiCl4 is a notable exception. Because of its high oxidation state, titanium(IV) compounds exhibit a high degree of covalent bonding.[30]

### Oxides, sulfides, and alkoxides

The most important oxide is TiO2, which exists in three important polymorphs; anatase, brookite, and rutile. All three are white diamagnetic solids, although mineral samples can appear dark, as in rutile. They adopt polymeric structures in which Ti is surrounded by six oxide ligands that link to other Ti centers.[34]

The term titanates usually refers to titanium(IV) compounds, as represented by barium titanate (BaTiO3). With a perovskite structure, this material exhibits piezoelectric properties and is used as a transducer in the interconversion of sound and electricity.[7] Many minerals are titanates, such as ilmenite (FeTiO3). Star sapphires and rubies get their asterism (star-forming shine) from the presence of titanium dioxide impurities.[17]

A variety of reduced oxides (suboxides) of titanium are known, mainly reduced stoichiometries of titanium dioxide obtained by atmospheric plasma spraying. Ti3O5, described as a Ti(IV)-Ti(III) species, is a purple semiconductor produced by reduction of TiO2 with hydrogen at high temperatures,[35] and is used industrially when surfaces need to be vapor-coated with titanium dioxide: it evaporates as pure TiO, whereas TiO2 evaporates as a mixture of oxides and deposits coatings with variable refractive index.[36] Also known is Ti2O3, with the corundum structure, and TiO, with the rock salt structure, although often nonstoichiometric.[37]

The alkoxides of titanium(IV), prepared by treating TiCl4 with alcohols, are colorless compounds that convert to the dioxide on reaction with water. They are industrially useful for depositing solid TiO2 via the sol-gel process. Titanium isopropoxide is used in the synthesis of chiral organic compounds via the Sharpless epoxidation.[38]

Titanium forms a variety of sulfides, but only TiS2 has attracted significant interest. It adopts a layered structure and was used as a cathode in the development of lithium batteries. Because Ti(IV) is a "hard cation", the sulfides of titanium are unstable and tend to hydrolyze to the oxide with release of hydrogen sulfide.[39]

### Nitrides and carbides

Titanium nitride (TiN) is a refractory solid exhibiting extreme hardness, thermal/electrical conductivity, and a high melting point.[40] TiN has a hardness equivalent to sapphire and carborundum (9.0 on the Mohs scale),[41] and is often used to coat cutting tools, such as drill bits.[42] It is also used as a gold-colored decorative finish and as a barrier layer in semiconductor fabrication.[43] Titanium carbide (TiC), which is also very hard, is found in cutting tools and coatings.[44]

### Halides

Titanium(III) compounds are characteristically violet, illustrated by this aqueous solution of titanium trichloride.

Titanium tetrachloride (titanium(IV) chloride, TiCl4[45]) is a colorless volatile liquid (commercial samples are yellowish) that, in air, hydrolyzes with spectacular emission of white clouds. Via the Kroll process, TiCl4 is used in the conversion of titanium ores to titanium metal. Titanium tetrachloride is also used to make titanium dioxide, e.g., for use in white paint.[46] It is widely used in organic chemistry as a Lewis acid, for example in the Mukaiyama aldol condensation.[47] In the van Arkel–de Boer process, titanium tetraiodide (TiI4) is generated in the production of high purity titanium metal.[48]

Titanium(III) and titanium(II) also form stable chlorides. A notable example is titanium(III) chloride (TiCl3), which is used as a catalyst for production of polyolefins (see Ziegler–Natta catalyst) and a reducing agent in organic chemistry.[49]

### Organometallic complexes

Owing to the important role of titanium compounds as polymerization catalyst, compounds with Ti-C bonds have been intensively studied. The most common organotitanium complex is titanocene dichloride ((C5H5)2TiCl2). Related compounds include Tebbe's reagent and Petasis reagent. Titanium forms carbonyl complexes, e.g. (C5H5)2Ti(CO)2.[50]

## History

Martin Heinrich Klaproth named titanium for the Titans of Greek mythology.

Titanium was discovered in 1791 by the clergyman and geologist William Gregor as an inclusion of a mineral in Cornwall, Great Britain.[51] Gregor recognized the presence of a new element in ilmenite[3] when he found black sand by a stream and noticed the sand was attracted by a magnet.[51] Analyzing the sand, he determined the presence of two metal oxides: iron oxide (explaining the attraction to the magnet) and 45.25% of a white metallic oxide he could not identify.[21] Realizing that the unidentified oxide contained a metal that did not match any known element, in 1791 Gregor reported his findings in both German and French science journals: Crell's Annalen and Observations et Mémoires sur la Physique.[51][52][53] He named this oxide manaccanite.[54]

Around the same time, Franz-Joseph Müller von Reichenstein produced a similar substance, but could not identify it.[3] The oxide was independently rediscovered in 1795 by Prussian chemist Martin Heinrich Klaproth in rutile from Boinik (the German name of Bajmócska), a village in Hungary (now Bojničky in Slovakia).[51][lower-alpha 2] Klaproth found that it contained a new element and named it for the Titans of Greek mythology.[24] After hearing about Gregor's earlier discovery, he obtained a sample of manaccanite and confirmed that it contained titanium.[56]

The currently known processes for extracting titanium from its various ores are laborious and costly; it is not possible to reduce the ore by heating with carbon (as in iron smelting) because titanium combines with the carbon to produce titanium carbide.[51] An extraction of 95% pure titanium was achieved by Lars Fredrik Nilson and Otto Petterson. To achieve this they chlorinated titanium oxide in a carbon monoxide atmosphere with chlorine gas before reducing it to titanium metal by the use of sodium.[57] Pure metallic titanium (99.9%) was first prepared in 1910 by Matthew A. Hunter at Rensselaer Polytechnic Institute by heating TiCl4 with sodium at 700–800 °C (1,292–1,472 °F) under great pressure[58] in a batch process known as the Hunter process.[2] Titanium metal was not used outside the laboratory until 1932 when William Justin Kroll produced it by reducing titanium tetrachloride (TiCl4) with calcium.[59] Eight years later he refined this process with magnesium and with sodium in what became known as the Kroll process.[59] Although research continues to seek cheaper and more efficient routes, such as the FFC Cambridge process, the Kroll process is still predominantly used for commercial production.[2][3]

Titanium "sponge", made by the Kroll process

Titanium of very high purity was made in small quantities when Anton Eduard van Arkel and Jan Hendrik de Boer discovered the iodide process in 1925, by reacting with iodine and decomposing the formed vapors over a hot filament to pure metal.[60]

In the 1950s and 1960s, the Soviet Union pioneered the use of titanium in military and submarine applications[58] (Alfa class and Mike class)[61] as part of programs related to the Cold War.[62] Starting in the early 1950s, titanium came into use extensively in military aviation, particularly in high-performance jets, starting with aircraft such as the F-100 Super Sabre and Lockheed A-12 and SR-71.[63]

Throughout the Cold War period, titanium was considered a strategic material by the U.S. government, and a large stockpile of titanium sponge (a porous form of the pure metal) was maintained by the Defense National Stockpile Center, until the stockpile was dispersed in the 2000s.[64] Even so, the U.S. government annually allocates 15,000 metric tons of titanium sponge as potential acquisitions for the stockpile.[65]

## Production

2024 production of ilmenite and rutile[65] Country | thousand
tonnes | % of total

|
|

China[lower-alpha 3] | 3,300 | 35.3
Mozambique | 1,908 | 20.4
South Africa | 1,400 | 15.0
Australia | 600 | 6.4
Norway[lower-alpha 3] | 360 | 3.8
Canada[lower-alpha 3] | 350 | 3.7
Senegal[lower-alpha 3] | 300 | 3.2
Madagascar[lower-alpha 3] | 240 | 2.6
India | 222 | 4.3
Ukraine | 130 | 1.4
United States | 100 | 1.1
Sierra Leone[lower-alpha 4] | 60 | 0.6
Kenya[lower-alpha 4] | 40 | 0.4
Other countries | 350 | 3.7
World | 9,360 | 100

Titanium production is largely divided into three measured categories: manufacture of porous titanium metal "sponge", titanium oxide pigment, and titanium mineral concentrates used for the production of sponge, pigment, metal ingots, and other titanium products such as coatings. These concentrates are largely made up of the mineral ilmenite, but also include anatase, natural and synthetic rutile, tailings, slag, and leucoxene. As of 2024, the largest producers of titanium mineral concentrates were China, Mozambique, and South Africa.[65]

Most of the world's titanium is produced in China. The United States Geological Survey's 2025 report on mineral commodities estimated that out of the 320,000 metric tons (310,000 long tons) of titanium sponge produced globally in 2024, 220,000 (69%) were produced in China, with the second-largest producer being Japan (which produced 55,000 metric tons in the same year, 17% of the total). Japan was the largest exporter of titanium sponge in 2024, but did not produce any titanium minerals on its own.[65] A prior report in 2021 noted that the four leading producers of titanium sponge were China (52%), Japan (24%), Russia (16%) and Kazakhstan (7%).[22] Russia remains the third-largest producer of titanium sponge[65] through the efforts of the metallurgy company VSMPO-AVISMA, despite international sanctions during the Russian invasion of Ukraine.[66] Production statistics on titanium dioxide pigment are not as clear-cut, but estimates placed the maximum capacity on global pigment production at 9,800,000 metric tons (9,600,000 long tons) in 2024.[65]

Various methods have been developed to extract and refine titanium from ore since the metal was first purified in 1910.[18][67]

### Mineral beneficiation processes

Mineral concentrate of fine-grained titanium

Several processes have been developed to extract titanium and usable titanium-containing minerals from ore. The Becher process is an industrial process used to produce synthetic rutile, a form of titanium dioxide, from the ore ilmenite by removing iron.[68] It is not used at scale.[67] The chloride process produces titanium tetrachloride through treatment of rutile ore with chlorine and carbon at high heat,[32] then oxidizes the product with an oxygen flame or plasma to produce titanium dioxide.[69] The sulfate process uses sulfuric acid (H2SO4) to leach titanium from ilmenite ore (FeTiO3), producing titanyl sulfate (TiOSO
4). This sulfate is broken into two hydrates, TiO
2 and H
2SO
4, through addition of water, and this water is removed by adding heat, which produces titanium dioxide as the end product.[70]

### Purification processes

#### Hunter process

The Hunter process was the first industrial process to produce pure metallic titanium. It was invented in 1910 by Matthew A. Hunter, a chemist born in New Zealand who worked in the United States.[71] The process involves reducing titanium tetrachloride (TiCl4) with sodium (Na) in a batch reactor with an inert atmosphere at a temperature of 1,000 °C. Dilute hydrochloric acid is then used to leach the salt from the product.[72]

TiCl4(g) + 4 Na(l) → 4 NaCl(l) + Ti(s)

#### Kroll process

Sample of titanium tetrachloride, a volatile liquid

The processing of titanium metal occurs in four major steps: reduction of titanium ore into "sponge", a porous form; melting of sponge, or sponge plus a master alloy to form an ingot; primary fabrication, where an ingot is converted into general mill products such as billet, bar, plate, sheet, strip, and tube; and secondary fabrication of finished shapes from mill products.[73]

Because it cannot be readily produced by reduction of titanium dioxide,[9] titanium metal is obtained by reduction of titanium tetrachloride (TiCl4) with magnesium metal in the Kroll process. The complexity of this batch production in the Kroll process explains the relatively high market value of titanium,[74] despite the Kroll process being less expensive than the Hunter process.[58] To produce the TiCl4 required by the Kroll process, the dioxide is subjected to carbothermic reduction in the presence of chlorine. In this process, the chlorine gas is passed over a red-hot mixture of rutile or ilmenite in the presence of carbon. After extensive purification by fractional distillation, the TiCl4 is reduced with 800 °C (1,470 °F) molten magnesium in an argon atmosphere.[7]

2FeTiOA3+7ClA2+6C→900AoC2FeClA3+2TiClA4+6CO
TiClA4+2Mg→1100AoCTi+2MgClA2

#### Arkel-Boer process

The van Arkel–de Boer process was the first semi-industrial process developed to produce pure titanium, invented by Anton Eduard van Arkel and Jan Hendrik de Boer in 1925 for the electronics company Philips.[75] It is a closed-loop process[76] that involves thermal decomposition of titanium tetraiodide.[77] This same process is used to purify other metals, such as thorium, hafnium, and zirconium,[75] and a similar process using further refined iodide was used to refine chromium. A desire to develop processes that could be run continuously led to the development of commercial processes to refine titanium.[76]

#### Armstrong process

Titanium powder is manufactured using a flow production process known as the Armstrong process[78] that is similar to the batch production Hunter process. A stream of titanium tetrachloride gas is added to a stream of molten sodium; the products (sodium chloride salt and titanium particles) are filtered from the extra sodium. Titanium is then separated from the salt by water washing. Both the sodium and chlorine are recycled to produce and process more titanium tetrachloride.[79]

#### Other processes

The titanium tetrachloride used as an intermediate in both the Hunter and Kroll process is a volatile and corrosive liquid, and is thus hazardous to work with. The processes involving the tetrachloride, both its formation and the vacuum distillation processes used to purify the final material, are slow, and have prompted development of other techniques.[80]

Methods for electrolytic production of Ti metal from TiO
2 using molten salt electrolytes have been proposed starting in the 1990s,[80] and have been researched and tested at laboratory and small pilot plant scales.[81] While some metals such as nickel and copper can be refined by electrowinning at room temperature, titanium must be in the molten state, which is likely to damage the refractory lining of a reaction vessel.[82] Zhang and colleagues concluded in 2017 that despite industry interests in finding new ways to manufacture titanium metal, no method had yet been developed to commercially replace the Kroll process.[83] One manufacturer in Virginia has developed a method to recycle scrap titanium metal back into powder, though their scale remains small, having the goal of producing only 125 tons of titanium per year as of 2025.[65]

One method that has been developed to potentially supplant the Kroll process is known as hydrogen-assisted magnesiothermic reduction and makes use of magnesium, hydrochloric acid, and a hydrogen atmosphere to directly reduce titanium dioxide to pure titanium. The reduction of titanium dioxide powder by magnesium in an atomphere of hydrogen can be followed by a leaching step with hydrochloric acid, which removes magnesium and residual non-titanium oxides. This is followed by additional reduction and leaching steps, and eventually results in pure titanium powder or titanium hydride.[84]

### Fabrication

All welding of titanium must be done in an inert atmosphere of argon or helium to shield it from contamination with atmospheric gases (oxygen, nitrogen, and hydrogen).[14] Contamination causes a variety of conditions, such as embrittlement, which reduce the integrity of the assembly welds and lead to joint failure.[85]

Titanium is very difficult to solder directly, and hence a solderable metal or alloy such as steel is coated on titanium prior to soldering.[86] Titanium metal can be machined with the same equipment and the same processes as stainless steel.[14]

#### Titanium alloys

Main article: Chemistry:Titanium alloys

Basic titanium products: plate, tube, rods, and powder

Common titanium alloys are made by reduction. For example, cuprotitanium (rutile with copper added), ferrocarbon titanium (ilmenite reduced with coke in an electric furnace), and manganotitanium (rutile with manganese or manganese oxides) are reduced.[87]

About fifty grades of titanium alloys are designed and currently used, although only a couple of dozen are readily available commercially.[88] The ASTM International recognizes 31 grades of titanium metal and alloys, of which grades one through four are commercially pure (unalloyed). Those four vary in tensile strength as a function of oxygen content, with grade 1 being the most ductile (lowest tensile strength with an oxygen content of 0.18%), and grade 4 the least ductile (highest tensile strength with an oxygen content of 0.40%).[17] The remaining grades are alloys, each designed for specific properties of ductility, strength, hardness, electrical resistivity, creep resistance, specific corrosion resistance, and combinations thereof.[89]

In addition to the ASTM specifications, titanium alloys are also produced to meet aerospace and military specifications (SAE-AMS, MIL-T), ISO standards, and country-specific specifications, as well as proprietary end-user specifications for aerospace, military, medical, and industrial applications.[90]

#### Forming and forging

Commercially pure flat product (sheet, plate) can be formed readily, but processing must take into account of the tendency of the metal to springback. This is especially true of certain high-strength alloys.[91][92] Exposure to the oxygen in air at the elevated temperatures used in forging results in formation of a brittle oxygen-rich metallic surface layer called "alpha case" that worsens the fatigue properties, so it must be removed by milling, etching, or electrochemical treatment.Cite error: Invalid parameter in `<ref>` tag The working of titanium may include friction welding,[93] cryo-forging,[94] and vacuum arc remelting.[95]

## Applications

A titanium cylinder

Titanium is used in steel as an alloying element (ferro-titanium) to reduce grain size and as a deoxidizer, and in stainless steel to reduce carbon content.[1] Titanium is often alloyed with aluminium (to refine grain size), vanadium, copper (to harden), iron, manganese, molybdenum, and other metals.[96] Titanium mill products (sheet, plate, bar, wire, forgings, castings) find application in industrial, aerospace, recreational, and emerging markets. Powdered titanium is used in pyrotechnics as a source of bright-burning particles.[97]

### Pigments, additives, and coatings

Titanium dioxide is the most commonly used compound of titanium.[22]

Titanium dioxide (TiO2) is the most common compound of the element, being the end point of 95% of the world's refined titanium. It is a widely used white pigment.[22] It is also used in cement, in gemstones, and as an optical opacifier in paper.[98]

TiO2 pigment is chemically inert, resists fading in sunlight, and is very opaque: it imparts a pure and brilliant white color to the brown or grey chemicals that form the majority of household plastics.[3] In nature, this compound is found in the minerals anatase, brookite, and rutile.[1] Paint made with titanium dioxide does well in severe temperatures and marine environments.[3] Pure titanium dioxide has a very high index of refraction and an optical dispersion higher than diamond.[2] Titanium dioxide is used in sunscreens because it reflects and absorbs UV light.[9]

### Aerospace and marine

The Lockheed A-12, one of the first planes with a frame mostly made of titanium

Because titanium alloys have high tensile strength to density ratio,[7] high corrosion resistance,[2] fatigue resistance, high crack resistance,[99] and ability to withstand moderately high temperatures without creeping, they are used in aircraft, armor plating, naval ships, spacecraft, and missiles.[2][3] For these applications, titanium is alloyed with aluminium, zirconium, nickel,[100] vanadium, and other elements to manufacture a variety of components including critical structural parts, landing gear, firewalls, exhaust ducts (helicopters), and hydraulic systems. About two thirds of all titanium metal produced is used in aircraft frames and engines.[101] The titanium 6AL-4V alloy accounts for almost 50% of all alloys used in aircraft applications.[102]

The Lockheed A-12 and the SR-71 "Blackbird" were two of the first aircraft frames where titanium was used, paving the way for much wider use in modern military and commercial aircraft. A large amount of titanium mill products are used in the production of many aircraft, such as (following values are amount of raw mill products used, only a fraction of this ends up in the finished aircraft): 116 metric tons are used in the Boeing 787, 77 in the Airbus A380, 59 in the Boeing 777, 45 in the Boeing 747, 32 in the Airbus A340, 18 in the Boeing 737, 18 in the Airbus A330, and 12 in the Airbus A320.[103] In aero engine applications, titanium is used for rotors, compressor blades, hydraulic system components, and nacelles.[104][105] An early use in jet engines was for the Orenda Iroquois in the 1950s.[106][107][108]

Because titanium is resistant to corrosion by sea water, it is used to make propeller shafts, rigging, heat exchangers in desalination plants,[2] heater-chillers for salt water aquariums, fishing line and leader, and divers' knives. Titanium is used in the housings and components of ocean-deployed surveillance and monitoring devices for science and military. The former Soviet Union developed techniques for making submarines with hulls of titanium alloys,[109] forging titanium in huge vacuum tubes.[100]

### Industrial

Welded titanium pipe and process equipment (heat exchangers, tanks, process vessels, valves) are used in the chemical and petrochemical industries primarily for corrosion resistance. Specific alloys are used in oil and gas downhole applications and nickel hydrometallurgy for their high strength (e. g.: titanium beta C alloy), corrosion resistance, or both. The pulp and paper industry uses titanium in process equipment exposed to corrosive media, such as sodium hypochlorite or wet chlorine gas (in the bleachery).[110] Titanium is also used in sputtering targets.[111]

Powdered titanium acts as a non-evaporative getter, and is one of several gas-reactive materials used to remove gases from ultra-high vacuum systems.[112] This application manifested in titanium sublimation pumps[113] first employed in 1961,[114] though the metal was first used in vacuum systems to prevent chambers from oxidizing in a design created by Raymond Herb in 1953.[115]

Titanium tetrachloride (TiCl4), a colorless liquid, is important as an intermediate in the process of making TiO2 and is also used to produce the Ziegler–Natta catalyst. Titanium tetrachloride is also used to iridize glass and, because it fumes strongly in moist air, it is used to make smoke screens.[9] In many industrial applications, titanium and its alloys can serve as a potential substitute for other metals, such as nickel, niobium, scandium, silver, tantalum, and tungsten.[116]

### Consumer and architectural

Tweeter loudspeaker driver with a membrane with 25 mm diameter made from titanium; from a JBL TI 5000 loudspeaker box, c. 1997

Titanium metal is used in automotive applications, particularly in automobile and motorcycle racing where low weight and high strength and rigidity are critical.[117] The metal is generally too expensive for the general consumer market, though some late model Corvettes have been manufactured with titanium exhausts.[118]

Titanium is used in many sporting goods: tennis rackets, golf clubs, lacrosse stick shafts; cricket, hockey, lacrosse, and football helmet grills, and bicycle frames and components. Although not a mainstream material for bicycle production, titanium bikes have been used by racing teams and adventure cyclists.[119] Titanium is used in spectable frames, as it is durable and protect the lenses, though it may be less flexible than alternatives.[120] Its biocompatibility is a potential benefit over other glasses frame materials.[121] Titanium is a common material for backpacking cookware and eating utensils. Titanium horseshoes are preferred to steel by farriers because they are lighter and more durable.[122] Some upmarket lightweight and corrosion-resistant tools, such as shovels, knife handles and flashlights, are made of titanium or titanium alloys.[123]

Titanium cladding of Frank Gehry's Guggenheim Museum, Bilbao

Titanium has occasionally been used in architecture. The 42.5 m (139 ft) Monument to Yuri Gagarin, the first man to travel in space, as well as the upper part of the 110 m (360 ft) Monument to the Conquerors of Space on top of the Cosmonaut Museum in Moscow are made of titanium.[124][125] The Guggenheim Museum Bilbao and the Cerritos Millennium Library were the first buildings in Europe and North America, respectively, to be sheathed in titanium panels.[101] Titanium sheathing was used in the Frederic C. Hamilton Building in Denver, Colorado.[126]

Because of titanium's superior strength and light weight relative to other metals (steel, stainless steel, and aluminium), and because of advances in metalworking techniques, its use has become widespread in the manufacture of firearms. Primary uses include pistol frames and revolver cylinders. For the same reasons, it is used in the body of some laptop computers (for example, in Apple's PowerBook G4)[127][123] and phones (such as the iPhone 15 Pro).[128]

### Jewelry

Relation between voltage and color for anodized titanium

Because of its durability, titanium is used in some designer jewelry, such as titanium rings.[122] Its inertness makes it hypoallergenic and wearable in environments such as swimming pools. Titanium is also alloyed with gold to produce an alloy that can be marketed as 24-karat gold, because the 1% of alloyed Ti is insufficient to require a lesser mark. The resulting alloy is roughly the hardness of 14-karat gold and is more durable than pure 24-karat gold.[129]

Titanium's durability, light weight, and dent and corrosion resistance make it useful for watch cases.[122] Some artists work with titanium to produce sculptures, decorative objects and furniture.[130] Titanium may be anodized to vary the thickness of the surface oxide layer, causing optical interference fringes and a variety of bright colors.[131] With its variable coloration and chemical inertness, titanium is a popular metal for body piercing.[132]

Titanium has a minor use in dedicated non-circulating coins and medals. In 1999, the world's first titanium coin was minted for Gibraltar's millennium celebration.[133] Pobjoy Mint, the British mint that produced the coin, continued to manufacture anodized titanium coins[134] until its closure in 2023.[135] The Gold Coast Titans, an Australian rugby league team, award a medal of pure titanium to their player of the year.[136]

### Medical

Main article: Chemistry:Titanium biocompatibility

Because titanium is biocompatible (non-toxic and not rejected by the body), it has many medical uses, including surgical implements and implants, such as hip balls and sockets (joint replacement) and dental implants.[51] Titanium and titanium alloy implants have been used in surgery since the 1950s, and are favored due to their low rate of corrosion, long life, and low Young's modulus. A titanium alloy that contains 6% aluminium and 4% vanadium commonly used in the aerospace industry is also a common material for artificial joints.[137]

Medical screws and plate used to repair wrist fractures. Scale is in centimeters.

Titanium has the inherent ability to osseointegrate, enabling use in dental implants that can last for over 30 years. This property is also useful for orthopedic implant applications.[51] These benefit from titanium's lower modulus of elasticity to more closely match that of the bone that such devices are intended to repair. As a result, skeletal loads are more evenly shared between bone and implant, leading to a lower incidence of bone degradation due to stress shielding and periprosthetic bone fractures, which occur at the boundaries of orthopedic implants. However, titanium alloys' stiffness is still more than twice that of bone, so adjacent bone bears a greatly reduced load and may deteriorate.[138][139] Biomedical implants coated with a combination of silver and titanium have been researched as a potential option for load-bearing implants that need antimicrobial surfaces.[137]

Modern advancements in additive manufacturing techniques have increased potential for titanium use in orthopedic implant applications.[140] Complex implant scaffold designs can be 3D-printed using titanium alloys, which allows for more patient-specific applications and increased implant osseointegration.[141] Because titanium is non-ferromagnetic, patients with titanium implants can be safely examined with magnetic resonance imaging (convenient for long-term implants). Preparing titanium for implantation in the body involves subjecting it to a high-temperature plasma arc which removes the surface atoms, exposing fresh titanium that is instantly oxidized.[51] Titanium is used for the surgical instruments used in image-guided surgery, as well as wheelchairs, crutches, and any other products where high strength and low weight are desirable.[142]

Titanium dioxide nanoparticles are widely used in electronics and the delivery of pharmaceuticals and cosmetics.[143]

#### Anticancer therapy studies

Following the success of platinum-based chemotherapy, titanium(IV) complexes were among the first non-platinum compounds to be tested and accepted for clinical trials in cancer treatment.[144] The advantage of titanium compounds lies in their high efficacy and low toxicity in vivo. In biological environments, hydrolysis leads to the safe and inert titanium dioxide. Despite these advantages, the first candidate compounds failed clinical trials due to insufficient efficacy to toxicity ratios and formulation complications. Further development resulted in the creation of potentially effective, selective, and stable titanium-based drugs.[145]

### Nuclear waste storage

Because of its corrosion resistance, containers made of titanium have been studied for the long-term storage of nuclear waste. Containers lasting more than 100,000 years are thought possible with manufacturing conditions that minimize material defects.[146] A titanium "drip shield" has been considered for installation over containers of other types to enhance their longevity.[147]

## Hazards and safety

Titanium (powder)  Hazards

GHS pictograms |
GHS Signal word | Danger

GHS hazard statements

| H228

GHS precautionary statements

| P210, P240, P241, P280, PP370+378Script error: No such module "Preview warning".Category:GHS errors[148]
NFPA 704 (fire diamond)  |

[149]

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Infobox references

Titanium is non-toxic, even in large doses, and does not play any natural role inside the human body.[24] An estimated 0.8 milligrams of titanium is ingested by humans each day, but most passes through the digestive system without being absorbed in the tissues.[24] However, it can sometimes bioaccumulate in tissues that contain silica. Yellow nail syndrome has been reported in individuals that have been exposed to titanium, though the disorder's rarity have made it difficult to determine a direct association between exposure and disorder development.[150][151]

As a powder or in the form of metal shavings, titanium metal poses a significant fire hazard and, when heated in air, an explosion hazard.[152] Water and carbon dioxide are ineffective for extinguishing a titanium fire; Class D dry powder agents must be used instead.[3] When used in the production or handling of chlorine, titanium exposed to dry chlorine gas may result in a titanium–chlorine fire.[153] Titanium can also catch fire when a fresh, non-oxidized surface comes in contact with liquid oxygen.[154]

## Function in plants

Nettles contain up to 80 parts per million of titanium.[24]

An unknown mechanism in plants may use titanium to stimulate the production of carbohydrates and encourage growth. This may explain why most plants contain about 1 part per million (ppm) of titanium, food plants have about 2 ppm, and horsetail and nettle contain up to 80 ppm.[24]

## See also

* Titanium alloys
* Suboxide
* Titanium in zircon geothermometry
* Titanium Man

## Footnotes

1. ↑ Twenty-one radioisotopes were known as of 2021 with the publication of the NUBASE2020 nuclear data library,[27] with two more radioisotopes, 65Ti and 66Ti being discovered in 2025.[28]
2. ↑ "Diesem zufolge will ich den Namen für die gegenwärtige metallische Substanz, gleichergestalt wie bei dem Uranium geschehen, aus der Mythologie, und zwar von den Ursöhnen der Erde, den Titanen, entlehnen, und benenne also diese neue Metallgeschlecht: Titanium; ... "[55](p 244)
[By virtue of this I will derive the name for the present metallic substance — as happened similarly in the case of uranium — from mythology, namely from the first sons of the Earth, the Titans, and thus [I] name this new species of metal: "titanium"; ... ]
3. ↑ 3.0 3.1 3.2 3.3 3.4 Country reports only produced ilmenite
4. ↑ 4.0 4.1 Country reports only produced rutile

## References

1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 "Titanium". Encyclopædia Britannica. 2006. http://www.britannica.com/eb/article-9072643/titanium. Retrieved 19 January 2022.
2. ↑ 2.00 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.10 2.11 2.12 Lide, D. R., ed (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press. ISBN 0-8493-0486-5.
3. ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Krebs, Robert E. (2006). The History and Use of Our Earth's Chemical Elements: A Reference Guide (2nd ed.). Westport, CT: Greenwood Press. ISBN 978-0-313-33438-2. https://books.google.com/books?id=yb9xTj72vNAC.
4. ↑ Medical, Tokyo; University, Dental (2022-05-24). "Exploring what gives titanium implants their remarkable biocompatibility". https://phys.org/news/2022-05-exploring-titanium-implants-remarkable-biocompatibility.html.
5. ↑ Donachie 1988, p. 11
6. ↑ 6.0 6.1 Barksdale 1968, p. 738
7. ↑ 7.0 7.1 7.2 7.3 7.4 7.5 "Titanium". Columbia Encyclopedia (6th ed.). New York: Columbia University Press. 2000–2006. ISBN 978-0-7876-5015-5. https://archive.org/details/columbiaencyclop00laga.
8. ↑ 8.0 8.1 8.2 Barbalace, Kenneth L. (2006). "Periodic Table of Elements: Ti – Titanium". http://environmentalchemistry.com/yogi/periodic/Ti-pg2.html#Nuclides.
9. ↑ 9.0 9.1 9.2 9.3 9.4 Stwertka, Albert (1998). "Titanium". Guide to the Elements (Revised ed.). Oxford University Press. pp. 81–82. ISBN 978-0-19-508083-4. https://books.google.com/books?id=K3RWAAAAYAAJ.
10. ↑ "Is Titanium A Refractory Metal". 3 August 2021. https://special-metals.co.uk/is-titanium-a-refractory-metal.
11. ↑ Steele, M. C.; Hein, R. A. (1953). "Superconductivity of Titanium". Phys. Rev. 92 (2): 243–247. doi:10.1103/PhysRev.92.243. Bibcode: 1953PhRv...92..243S. https://archive.org/details/sim_physical-review_1953-10-15_92_2/page/242.
12. ↑ Thiemann, M. (2018). "Complete electrodynamics of a BCS superconductor with μeV energy scales: Microwave spectroscopy on titanium at mK temperatures". Phys. Rev. B 97 (21). doi:10.1103/PhysRevB.97.214516. Bibcode: 2018PhRvB..97u4516T.
13. ↑ Donachie 1988, Appendix J, Table J.2
14. ↑ 14.0 14.1 14.2 14.3 14.4 Barksdale 1968, p. 734
15. ↑ Schmidt, F. F.; Wood, R. A. (1965). HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS BY (TECHNICAL MEMORANDUM X-53445 ed.). GEORGE C. MARSHALL SPACE FLIGHT CENTER: NASA. https://ntrs.nasa.gov/api/citations/19660015720/downloads/19660015720.pdf.
16. ↑ Puigdomenech, Ignasi (2004) Hydra/Medusa Chemical Equilibrium Database and Plotting Software, KTH Royal Institute of Technology.
17. ↑ 17.0 17.1 17.2 17.3 17.4 Emsley 2001, p. 453
18. ↑ 18.0 18.1 18.2 18.3 Sicius, Hermann (2024), "Titanium Group: Elements of the Fourth Subgroup" (in en), Handbook of the Chemical Elements (Berlin, Heidelberg: Springer Berlin Heidelberg): pp. 487–535, doi:10.1007/978-3-662-68921-9_9, ISBN 978-3-662-68920-2, https://link.springer.com/10.1007/978-3-662-68921-9_9, retrieved 2025-10-08
19. ↑ Casillas, N.; Charlebois, S.; Smyrl, W.H.; White, H.S. (1994). "Pitting corrosion of titanium". J. Electrochem. Soc. 141 (3): 636–642. doi:10.1149/1.2054783. Bibcode: 1994JElS..141..636C. https://apps.dtic.mil/dtic/tr/fulltext/u2/a274980.pdf.
20. ↑ Forrest, A.L. (1981). "Effects of Metal Chemistry on Behavior of Titanium in Industrial Applications". Industrial Applications of Titanium and Zirconium. p. 112. https://books.google.com/books?id=0Adr4zleybgC&pg=PA112.
21. ↑ 21.0 21.1 21.2 Barksdale 1968, p. 732
22. ↑ 22.0 22.1 22.2 22.3 22.4 "Titanium". United States Geological Survey (USGS). https://minerals.usgs.gov/minerals/pubs/commodity/titanium/.
23. ↑ Buettner, K. M.; Valentine, A. M. (2012). "Bioinorganic Chemistry of Titanium". Chemical Reviews 112 (3): 1863–81. doi:10.1021/cr1002886. PMID 22074443. Bibcode: 2012ChRv..112.1863B.
24. ↑ 24.0 24.1 24.2 24.3 24.4 24.5 Emsley 2001, p. 451
25. ↑ Chen, Jing; Li, Jiliang; Wu, Jun (2000-04-30). "Native titanium inclusions in the coesite eclogites from Dabieshan, China" (in en). Earth and Planetary Science Letters 177 (3–4): 237–240. doi:10.1016/S0012-821X(00)00057-1. Bibcode: 2000E&PSL.177..237C. https://linkinghub.elsevier.com/retrieve/pii/S0012821X00000571.
26. ↑ Mokhov, A. V.; Gornostaeva, T. A.; Kartashov, P. M.; Asadulin, En. E.; Bogatikov, O. A. (2015). "Nanocrystals of native iron and titanium in impact glasses of the lunar regolith" (in en). Doklady Earth Sciences 460 (2): 118–122. doi:10.1134/S1028334X15020038. ISSN 1028-334X. Bibcode: 2015DokES.460..118M. http://link.springer.com/10.1134/S1028334X15020038.
27. ↑ 27.0 27.1 Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties". Chinese Physics C 45 (3). doi:10.1088/1674-1137/abddae. https://www-nds.iaea.org/amdc/ame2020/NUBASE2020.pdf. Retrieved 10 October 2025.
28. ↑ 28.0 28.1 Tarasov, O. B.; Sherrill, B. M.; Dombos, A. C.; Fukushima, K.; Gade, A.; Haak, K.; Hausmann, M.; Kahl, D. et al. (2025-09-04). "Discovery of new isotopes in the fragmentation of 82Se and insights into their production". Physical Review C 112 (3): 034604. doi:10.1103/573p-7fjp. https://link.aps.org/doi/10.1103/573p-7fjp.
29. ↑ Wang, M.; Audi, G.; Kondev, F. G.; Huang, W. J.; Naimi, S.; Xu, X. (2017). "The AME2016 atomic mass evaluation (II). Tables, graphs, and references". Chinese Physics C 41 (3): 030003-1—030003-442. doi:10.1088/1674-1137/41/3/030003. http://nuclearmasses.org/resources_folder/Wang_2017_Chinese_Phys_C_41_030003.pdf.
30. ↑ 30.0 30.1 Greenwood & Earnshaw 1997, p. 958
31. ↑ Greenwood & Earnshaw 1997, p. 970
32. ↑ 32.0 32.1 Greenwood & Earnshaw 1997, p. 960
33. ↑ Greenwood & Earnshaw 1997, p. 967
34. ↑ Greenwood & Earnshaw 1997, p. 961
35. ↑ Liu, Gang; Huang, Wan-Xia; Yi, Yong (26 June 2013). "Preparation and Optical Storage Properties of λTi3O5 Powder". Journal of Inorganic Materials 28 (4): 425–430. doi:10.3724/SP.J.1077.2013.12309.
36. ↑ Bonardi, Antonio; Pühlhofer, Gerd; Hermanutz, Stephan; Santangelo, Andrea (2014). "A new solution for mirror coating in γ-ray Cherenkov Astronomy". Experimental Astronomy 38 (1–2): 1–9. doi:10.1007/s10686-014-9398-x. Bibcode: 2014ExA....38....1B.γ-ray+Cherenkov+Astronomy&rft.jtitle=Experimental+Astronomy&rft.aulast=Bonardi&rft.aufirst=Antonio&rft.au=Bonardi, Antonio&rft.au=Pühlhofer, Gerd&rft.au=Hermanutz, Stephan&rft.au=Santangelo, Andrea&rft.date=2014&rft.volume=38&rft.issue=1–2&rft.pages=1–9&rft_id=info:doi/10.1007/s10686-014-9398-x&rft_id=info:bibcode/2014ExA....38....1B&rfr_id=info:sid/en.wikibooks.org:Chemistry:Titanium">
37. ↑ Greenwood & Earnshaw 1997, p. 962.
38. ↑ Ramón, Diego J.; Yus, Miguel (2006). "In the arena of enantioselective synthesis, titanium complexes wear the laurel wreath". Chem. Rev. 106 (6): 2126–2308. doi:10.1021/cr040698p. PMID 16771446.
39. ↑ McKelvy, M.J.; Glaunsinger, W.S. (1995). "Titanium Disulfide". Inorganic Syntheses. 30. pp. 28–32. doi:10.1002/9780470132616.ch7. ISBN 978-0-470-13261-6.
40. ↑ Saha, Naresh (1992). "Titanium nitride oxidation chemistry: An x-ray photoelectron spectroscopy study". Journal of Applied Physics 72 (7): 3072–3079. doi:10.1063/1.351465. Bibcode: 1992JAP....72.3072S.
41. ↑ Schubert, E.F.. "The hardness scale introduced by Friederich Mohs". Rensselaer Polytechnic Institute. https://www.ecse.rpi.edu/~schubert/Educational-resources/Materials-Hardness.pdf.
42. ↑ Truini, Joseph (May 1988). "Drill bits". Popular Mechanics 165 (5): 91. ISSN 0032-4558. https://books.google.com/books?id=Z-QDAAAAMBAJ.
43. ↑ Baliga, B. Jayant (2005). Silicon carbide power devices. World Scientific. p. 91. ISBN 978-981-256-605-8. https://books.google.com/books?id=LNLVwAzhN7EC.
44. ↑ "Titanium carbide product information". H.C. Starck. http://www.hcstarck.com/titanium_carbide_tic.
45. ↑ Seong, S.; Younossi, O.; Goldsmith, B.W. (2009). ﻿Titanium: Industrial base, price trends, and technology initiatives﻿ (Report). Rand Corporation. p. 10. ISBN 978-0-8330-4575-1. https://books.google.com/books?id=tIPFfYW304IC&pg=PA10.
46. ↑ Johnson, Richard W. (1998). The Handbook of Fluid Dynamics. Springer. pp. 38–21. ISBN 978-3-540-64612-9. https://books.google.com/books?id=JBTlucgGdegC.
47. ↑ Coates, Robert M.; Paquette, Leo A. (2000). Handbook of Reagents for Organic Synthesis. John Wiley and Sons. p. 93. ISBN 978-0-470-85625-3. https://books.google.com/books?id=xxYjJgupBSMC.
48. ↑ Greenwood & Earnshaw 1997, p. 965
49. ↑ Gundersen, Lise-Lotte; Rise, Frode; Undheim, Kjell; Méndez Andino, José (2007). "Titanium(III) Chloride". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rt120.pub2. ISBN 978-0-471-93623-7.
50. ↑ Hartwig, J.F. (2010). Organotransition Metal Chemistry, from Bonding to Catalysis. New York, NY: University Science Books. ISBN 978-1-891389-53-5.
51. ↑ 51.0 51.1 51.2 51.3 51.4 51.5 51.6 51.7 Emsley 2001, p. 452
52. ↑ Gregor, William (1791). "Beobachtungen und Versuche über den Menakanit, einen in Cornwall gefundenen magnetischen Sand" (in de). Chemische Annalen 1: pp. 40–54, 103–119.
53. ↑ Gregor, William (1791). "Sur le menakanite, espèce de sable attirable par l'aimant, trouvé dans la province de Cornouilles" (in fr). Observations et Mémoires sur la Physique 39: 72–78, 152–160.
54. ↑ Habashi, Fathi (January 2001). "Historical Introduction to Refractory Metals". Mineral Processing and Extractive Metallurgy Review 22 (1): 25–53. doi:10.1080/08827509808962488. Bibcode: 2001MPEMR..22...25H.
55. ↑ Klaproth, Martin Heinrich (1795). "Chemische Untersuchung des sogenannten hungarischen rothen Schörls". Beiträge zur chemischen Kenntniss der Mineralkörper [Contributions to the chemical knowledge of mineral substances] (Berlin, DE: Heinrich August Rottmann) 1: 233–244. https://books.google.com/books?id=5zFGAAAAYAAJ&pg=PA233.
56. ↑ ﻿Twenty-five years of Titanium news: A concise and timely report on titanium and titanium recycling﻿ (Report). Suisman Titanium Corporation. 1995. p. 37. https://books.google.com/books?id=amIQAQAAMAAJ.
57. ↑ Takeda, Osamu; Uda, Tetsuya; Okabe, Toru H. (2024-01-01), Seetharaman, Seshadri; Guthrie, Roderick; McLean, Alexander et al., eds., "Chapter 2.7 - Rare Earth, Titanium Group Metals, and Reactive Metals Production", Treatise on Process Metallurgy (Elsevier): pp. 697–750, doi:10.1016/B978-0-323-85373-6.00010-7, ISBN 978-0-323-85373-6, https://www.sciencedirect.com/science/article/abs/pii/B9780323853736000107, retrieved 2024-11-22
58. ↑ 58.0 58.1 58.2 Roza 2008, p. 9
59. ↑ 59.0 59.1 Greenwood & Earnshaw 1997, p. 955
60. ↑ van Arkel, A.E.; de Boer, J.H. (1925). "Preparation of pure titanium, zirconium, hafnium, and thorium metal". Zeitschrift für anorganische und allgemeine Chemie 148: 345–50. doi:10.1002/zaac.19251480133.
61. ↑ Yanko, Eugene (2006). "Submarines: General information". Omsk VTTV Arms Exhibition and Military Parade JSC. http://warfare.be/db/catid/243/linkid/1756/.
62. ↑ "VSMPO stronger than ever". KCI Publishing B.V.. July–August 2001. pp. 16–19. http://www.stainless-steel-world.net/pdf/ssw0107.pdf?issueID=30.
63. ↑ Jasper, Adam, ed (2020). Architecture and Anthropology. Taylor & Francis. p. 42. ISBN 978-1-351-10627-6.
64. ↑ Defense National Stockpile Center (2008). ﻿Strategic and Critical Materials Report to the Congress. Operations under the Strategic and Critical Materials Stock Piling Act during the Period October 2007 through September 2008﻿ (Report). United States Department of Defense. p. 3304. https://www.dnsc.dla.mil/Uploads/Materials/esolomon_5-21-2009_13-29-4_2008OpsReport.pdf.
65. ↑ 65.0 65.1 65.2 65.3 65.4 65.5 65.6 United States Geological Survey (March 2025). "Titanium and titanium dioxide". https://pubs.usgs.gov/periodicals/mcs2025/mcs2025.pdf#page=190.
66. ↑ Taylor, Adam (March 21, 2024). "Two years after start of Ukraine war, Russian titanium keeps flowing to West". The Washington Post. https://www.washingtonpost.com/world/2024/03/21/russia-titanium-exports-sanctions/.
67. ↑ 67.0 67.1 Sibum, Heinz; Güther, Volker; Roidl, Oskar; Habashi, Fathi; Wolf, Hans Uwe (2000). "Titanium, Titanium Alloys, and Titanium Compounds". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a27_095. ISBN 978-3-527-30385-4.
68. ↑ "Rutile and ilmenite - Australian production and potential profile". http://www.chemlink.com.au/titan_rutile.htm.
69. ↑ Auer, Gerhard; Woditsch, Peter; Westerhaus, Axel; Kischkewitz, Jürgen; Griebler, Wolf-Dieter; Rohe, Markus; Liedekerke, Marcel (2017). "Pigments, Inorganic, 2. White Pigments". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. p. 13. doi:10.1002/14356007.n20_n01.pub2. ISBN 978-3-527-30673-2.
70. ↑ "Application Note Titanium Dioxide - Sulfate Process". Barben Analytical. Ametek. 2015. https://www.barbenanalytical.com/-/media/ametekbarbenanalytical/downloads/application_notes/tio2_an_reva.pdf?la=en&revision=eee43ea5-f5e3-4167-af19-4c177cc3dcdd.
71. ↑ Hunter, M. A. (1910). "Metallic Titanium". J. Am. Chem. Soc. 32 (3): 330–336. doi:10.1021/ja01921a006. Bibcode: 1910JAChS..32..330H.
72. ↑ Schaschke, Carl (2014) (in en). Oxford University Press. doi:10.1093/acref/9780199651450.001.0001. ISBN 978-0-19-965145-0. http://www.oxfordreference.com/view/10.1093/acref/9780199651450.001.0001/acref-9780199651450-e-1447.
73. ↑ Donachie 1988, Ch. 4
74. ↑ Barksdale 1968, p. 733
75. ↑ 75.0 75.1 Binnewies, Michael; Schmidt, Marcus (2012). "The Iodide Process – a Key to many Divisions of Modern Technology" (in en). Zeitschrift für anorganische und allgemeine Chemie 638 (6): 891–893. doi:10.1002/zaac.201210009. ISSN 0044-2313. Bibcode: 2012ZAACh.638..891B. https://onlinelibrary.wiley.com/doi/10.1002/zaac.201210009.
76. ↑ 76.0 76.1 Commission, U. S. Atomic Energy; Development, U. S. Atomic Energy Commission Division of Reactor (1960) (in en). The Metallurgy of Hafnium. Naval Reactors, Division of Reactor Development, U.S. Atomic Energy Commission. p. 109. https://books.google.com/books?id=dqKgCIbq7hEC.
77. ↑ Rosenqvist, Terkel (2004) (in en). Principles of Extractive Metallurgy. Tapir Academic Press. pp. 393–395. ISBN 978-82-519-1922-7. https://books.google.com/books?id=I2mg2ine4AEC.
78. ↑ Roza 2008, p. 25
79. ↑ "Titanium". York, UK: University of York. 15 January 2015. http://www.essentialchemicalindustry.org/metals/titanium.html.
80. ↑ 80.0 80.1 Flower, Harvey M. (2000). "Materials Science: A moving oxygen story". Nature 407 (6802): 305–306. doi:10.1038/35030266. PMID 11014169.
81. ↑ Fray, Derek; Schwandt, Carsten (2017). "Aspects of the Application of Electrochemistry to the Extraction of Titanium and Its Applications". Materials Transactions 58 (3): 306–312. doi:10.2320/matertrans.MK201619. ISSN 1345-9678.
82. ↑ Shamsuddin, Mohammad; Sohn, Hong Yong (2023). "Role of electrochemical processes in the extraction of metals and alloys – a review". Mineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy 132 (3–4): 193–209. doi:10.1080/25726641.2023.2255368. Bibcode: 2023MPEM..132..193S.
83. ↑ Zhang, Ying; Fang, Zhigang Zak; Sun, Pei; Zheng, Shili; Xia, Yang; Free, Michael (2017). "A Perspective on Thermochemical and Electrochemical Processes for Titanium Metal Production". JOM 69 (10): 1861–1868. doi:10.1007/s11837-017-2481-9. Bibcode: 2017JOM....69j1861Z.
84. ↑ Lefler, Hyrum; Fang, Z. Zak; Zhang, Ying; Sun, Pei; Xia, Yang (2018). "Mechanisms of Hydrogen-Assisted Magnesiothermic Reduction of TiO2" (in en). Metallurgical and Materials Transactions B 49 (6): 2998–3006. doi:10.1007/s11663-018-1399-0. ISSN 1073-5615. https://link.springer.com/10.1007/s11663-018-1399-0.
85. ↑ Engel, Abraham L.; Huber, R.W.; Lane, I.R. (1955). Arc-welding Titanium. U.S. Department of the Interior, Bureau of Mines.
86. ↑ Lewis, W.J.; Faulkner, G.E.; Rieppel, P.J. (1956). Report on Brazing and Soldering of Titanium. Titanium Metallurgical Laboratory, Battelle Memorial Institute. https://books.google.com/books?id=316b7CW_HOMC&dq=Titanium+soldering&pg=PA2.
87. ↑ "Titanium". Microsoft Encarta. 2005. http://encarta.msn.com/encyclopedia_761569280/Titanium.html. Retrieved 29 December 2006.
88. ↑ Donachie 1988, p. 16, Appendix J
89. ↑ Annual Book of ASTM Standards. West Conshohocken, PA: ASTM International. 2006. section 2. ISBN 978-0-8031-4086-8. https://books.google.com/books?id=yCGIPQAACAAJ. Annual Book of ASTM Standards. West Conshohocken, PA: ASTM International. 1998. sections 2 & 13. ISBN 978-0-8031-2452-3.
90. ↑ Donachie 1988, pp. 13–16, Appendices H and J
91. ↑ AWS G2.4/G2.4M:2007 Guide for the Fusion Welding of Titanium and Titanium Alloys. Miami: American Welding Society. 2006. http://pdfcast.org/pdf/titanium-design-and-fabrication-handbook-for-industrial-applications.
92. ↑ Titanium design and fabrication handbook for industrial applications. Dallas: Titanium Metals Corporation. 1997. http://www.timet.com/design&fabframe.html;.
93. ↑ "Linear Friction Welding: A Solution for Titanium Forgings". 28 August 2023. https://www.mtiwelding.com/blog/linear-friction-welding-a-solution-for-titanium-forgings/.
94. ↑ "Ultra-Cold Forging Makes Titanium Strong and Ductile". 21 October 2021. https://www.machinedesign.com/materials/article/21179098/ultra-cold-forging-makes-titanium-strong-and-ductile.
95. ↑ Karimi-Sibaki, E.; Kharicha, A.; Wu, M.; Ludwig, A.; Bohacek, J. (2020). "A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling" (in en). Metallurgical and Materials Transactions B 51 (1): 222–235. doi:10.1007/s11663-019-01719-5. ISSN 1073-5615. https://link.springer.com/10.1007/s11663-019-01719-5.
96. ↑ Hampel, Clifford A. (1968). The Encyclopedia of the Chemical Elements. Van Nostrand Reinhold. p. 738. ISBN 978-0-442-15598-8.
97. ↑ Mocella, Chris; Conkling, John A. (2019). Chemistry of Pyrotechnics. CRC Press. p. 86. ISBN 978-1-351-62656-9.
98. ↑ Smook, Gary A. (2002). Handbook for Pulp & Paper Technologists (3rd ed.). Angus Wilde Publications. p. 223. ISBN 978-0-9694628-5-9. https://books.google.com/books?id=TgtFPgAACAAJ.
99. ↑ Moiseyev, Valentin N. (2006). Titanium Alloys: Russian Aircraft and Aerospace Applications. Taylor and Francis, LLC. p. 196. ISBN 978-0-8493-3273-9. https://books.google.com/books?id=legtmQEACAAJ.
100. ↑ 100.0 100.1 Kramer, Andrew E. (5 July 2013). "Titanium Fills Vital Role for Boeing and Russia". The New York Times. https://www.nytimes.com/2013/07/06/business/global/titanium-fills-vital-role-for-boeing-and-russia.html.
101. ↑ 101.0 101.1 Emsley 2001, p. 454
102. ↑ Donachie 1988, p. 13
103. ↑ Froes, F.H., ed (2015). Titanium Physical Metallurgy, Processing, and Applications. ASM International. p. 7. ISBN 978-1-62708-080-4.
104. ↑ "Titanium in Aerospace – Titanium" (in en). 2024-04-10. https://titaniumthemetal.org/blog/titanium-in-aerospace/.
105. ↑ "Titanium Metal (Ti) / Sponge / Titanium Powder". https://www.lb7.uscourts.gov/documents/13cr5152.pdf.
106. ↑ (in en) Flight. 73. IPC Transport Press Limited. 1958. p. 864. https://books.google.com/books?id=nYRXELgG2MoC.
107. ↑ "Iroquois". 1957. p. 412. https://www.flightglobal.com/pdfarchive/view/1957/1957 - 1324.html.
108. ↑ Gunston, Bill (2004-01-15) (in en). Night Fighters: A Development and Combat History: A Development and Combat History. The History Press. ISBN 978-0-7524-9512-5. https://books.google.com/books?id=DrM7AwAAQBAJ.
109. ↑ "Unravelling a Cold War Mystery". 2007. https://www.cia.gov/resources/csi/static/the-ALFA-SSN.pdf.
110. ↑ Donachie 1988, pp. 11–16
111. ↑ Bunshah, Rointan F., ed (2001). "Wear and corrosion resistant hard coatings for non-cutting tool applications". Handbook of Hard Coatings. Norwich, NY: William Andrew Inc.. pp. 411–419. ISBN 978-0-8155-1438-1. https://books.google.com/books?id=daamnz8el2sC&pg=PA413.
112. ↑ Krasnov, A. A.; Semenov, A. M. (2023). "Lumped Ultra-High Vacuum Pumps Based on Non-Evaporable Getters" (in en). Bulletin of the Russian Academy of Sciences: Physics 87 (5): 568–572. doi:10.3103/S1062873822701726. ISSN 1062-8738. Bibcode: 2023BRASP..87..568K. https://link.springer.com/10.3103/S1062873822701726.
113. ↑ Gupta, Ak; Leck, Jh (1975). "An evaluation of the titanium sublimation pump" (in en). Vacuum 25 (8): 362–372. doi:10.1016/0042-207X(75)91654-1. Bibcode: 1975Vacuu..25..362G. https://linkinghub.elsevier.com/retrieve/pii/0042207X75916541.
114. ↑ Welch, Kimo M. (December 1993). ﻿Some Important Developments in Capture Pumping Technology in the Last Forty Years﻿ (Report). Brookhaven National Laboratory. https://www.agsrhichome.bnl.gov/RHIC/RAP/rhic_notes/AD-RHIC-1-142/AD-RHIC-126.pdf.
115. ↑ Buie, John. "Evolution Of The Laboratory Vacuum Pump" (in en). https://www.labmanager.com/evolution-of-the-laboratory-vacuum-pump-19365.
116. ↑ United States Geological Survey (March 2025). "Mineral Commodities Summaries 2025". https://pubs.usgs.gov/periodicals/mcs2025/mcs2025.pdf.
117. ↑ Funatani, K. (9–12 October 2000). "Recent trends in surface modification of light metals § Metal matrix composite technologies". 20th ASM Heat Treating Society Conference. 1 & 2. St. Louis, MO: ASM International (published 2001). pp. 138–144, esp. 141. ISBN 978-0-87170-727-7. https://books.google.com/books?id=4F1zYT4FHyMC.
118. ↑ "Titanium exhausts". National Corvette Museum. 2006. http://www.iglou.com/corvette/specs/2001/exhaust.htm.
119. ↑ Davis, Joseph R. (1998). Metals Handbook. ASM International. p. 584. ISBN 978-0-87170-654-6. https://archive.org/details/metalshandbook00davi.
120. ↑ Kaneko, H.; Kakunai, S.; Morita, M.; Nishimura, J. (2007). "Mechanical characteristics of spectacles". Experimental Analysis of Nano and Engineering Materials and Structures. pp. 521–522. doi:10.1007/978-1-4020-6239-1_258. ISBN 978-1-4020-6238-4.
121. ↑ Hansraj, Rekha; Govender, Bavahnee; Joosab, Muhammed; Magubane, Sinenhlanhla; Rawat, Zahira; Bissessur, Ajay (2021-05-14). "Spectacle frames: Disposal practices, biodegradability and biocompatibility – A pilot study" (in en). African Vision and Eye Health 80 (1): 7. doi:10.4102/aveh.v80i1.621. ISSN 2410-1516. https://avehjournal.org/index.php/aveh/article/view/621.
122. ↑ 122.0 122.1 122.2 Donachie 1988, pp. 11, 255
123. ↑ 123.0 123.1 Qian, Ma; Niinomi, Mitsuo (2019). Real-World Use of Titanium. Elsevier Science. pp. 7–8. ISBN 978-0-12-815820-3.
124. ↑ Mike Gruntman (2004). Blazing the Trail: The Early History of Spacecraft and Rocketry. Reston, VA: American Institute of Aeronautics and Astronautics. p. 457. ISBN 978-1-56347-705-8. https://books.google.com/books?id=2XY9KXxF8OEC.
125. ↑ Lütjering, Gerd; Williams, James Case (12 June 2007). "Appearance Related Applications". Titanium. Springer. ISBN 978-3-540-71397-5. https://books.google.com/books?id=41EqJFxjA4wC&pg=PA408.
126. ↑ "Denver Art Museum, Frederic C. Hamilton Building". Design Build Network. SPG Media. 2006. http://www.designbuild-network.com/projects/dam/.
127. ↑ "Apple PowerBook G4 400 (Original – Ti) Specs". everymac.com. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_400.html.
128. ↑ "Apple Announces iPhone 15 Pro Models With Titanium Enclosure" (in en). https://www.cnet.com/tech/mobile/apple-announces-iphone-15-pro-models-with-titanium-enclosure/.
129. ↑ Gafner, G. (1989). "The development of 990 Gold-Titanium: its Production, use and Properties". Gold Bulletin 22 (4): 112–122. doi:10.1007/BF03214709. http://goldbulletin.org/assets/file/goldbulletin/downloads/Gafner_4_22.pdf.
130. ↑ "Fine Art and Functional Works in Titanium and Other Earth Elements". http://www.titanium-arts.com/home.html.
131. ↑ Alwitt, Robert S. (2002). "Electrochemistry Encyclopedia". Chemical Engineering Department, Case Western Reserve University, U.S.. http://electrochem.cwru.edu/ed/encycl/art-a02-anodizing.htm.
132. ↑ "Body Piercing Safety". doctorgoodskin.com. 1 August 2006. http://www.doctorgoodskin.com/tp/bodypiercing/.
133. ↑ "World Firsts". British Pobjoy Mint. https://www.pobjoy.com/us/world-firsts.
134. ↑ "Pobjoy issues colored titanium coins" (in en). 2018-06-06. https://www.numismaticnews.net/world-coins/pobjoy-issues-colored-titanium-coins.
135. ↑ Starck, Jeff (12 October 2023). "After 58 years of operation, UK's Pobjoy Mint closing" (in en). https://www.coinworld.com/news/us-coins/after-58-years-of-operation-uk-s-pobjoy-mint-closing.
136. ↑ Turgeon, Luke (20 September 2007). "Titanium Titan: Broughton immortalised". The Gold Coast Bulletin. http://www.goldcoast.com.au/article/2007/09/20/2947_gold-coast-titans.html.
137. ↑ 137.0 137.1 Sarraf, Masoud; Rezvani Ghomi, Erfan; Alipour, Saeid; Ramakrishna, Seeram; Liana Sukiman, Nazatul (2022). "A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications". Bio-Design and Manufacturing 5 (2): 371–395. doi:10.1007/s42242-021-00170-3. ISSN 2096-5524. PMID 34721937. PMC 8546395. https://link.springer.com/content/pdf/10.1007/s42242-021-00170-3.pdf. Retrieved 2025-05-28.
138. ↑ "Titanium foams replace injured bones". Research News. 1 September 2010. http://www.fraunhofer.de/en/press/research-news/2010/09/titanium-foams-replace-injured-bones.jsp. Retrieved 27 September 2010.
139. ↑ Lavine, Marc S. (11 January 2018). Vignieri, Sacha. ed. "Make no bones about titanium". Science 359 (6372): 173.6–174. doi:10.1126/science.359.6372.173-f. Bibcode: 2018Sci...359..173L.
140. ↑ Harun, W.S.W.; Manam, N.S.; Kamariah, M.S.I.N.; Sharif, S.; Zulkifly, A.H.; Ahmad, I.; Miura, H. (2018). "A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications". Powder Technology 331: 74–97. doi:10.1016/j.powtec.2018.03.010. http://irep.iium.edu.my/64319/1/A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications.pdf.
141. ↑ Trevisan, Francesco; Calignano, Flaviana; Aversa, Alberta; Marchese, Giulio; Lombardi, Mariangela; Biamino, Sara; Ugues, Daniele; Manfredi, Diego (2017). "Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications". Journal of Applied Biomaterials & Functional Materials 16 (2): 57–67. doi:10.5301/jabfm.5000371. PMID 28967051.
142. ↑ Qian, Ma; Niinomi, Mitsuo (2019). Real-World Use of Titanium. Elsevier Science. pp. 51, 128. ISBN 978-0-12-815820-3.
143. ↑ Pinsino, Annalisa; Russo, Roberta; Bonaventura, Rosa; Brunelli, Andrea; Marcomini, Antonio; Matranga, Valeria (28 September 2015). "Titanium dioxide nanoparticles stimulate sea urchin immune cell phagocytic activity involving TLR/p38 MAPK-mediated signalling pathway". Scientific Reports 5. doi:10.1038/srep14492. PMID 26412401. Bibcode: 2015NatSR...514492P.
144. ↑ Miller, Maya; Mellul, Anna; Braun, Maya; Sherill-Rofe, Dana; Cohen, Emiliano; Shpilt, Zohar; Unterman, Irene; Braitbard, Ori et al. (2020-07-24). "Titanium Tackles the Endoplasmic Reticulum: A First Genomic Study on a Titanium Anticancer Metallodrug". iScience 23 (7). doi:10.1016/j.isci.2020.101262. ISSN 2589-0042. PMID 32585595. Bibcode: 2020iSci...23j1262M.
145. ↑ Tshuva, Edit Y.; Miller, Maya (2018). "Chapter 8\. Coordination complexes of titanium(IV) for anticancer therapy". in Sigel, Astrid; Sigel, Helmut; Freisinger, Eva et al.. Metallo-drugs: Development and action of anticancer agents. Metal Ions in Life Sciences. 18. Berlin, DE: de Gruyter GmbH. pp. 219–250. doi:10.1515/9783110470734-014. ISBN 978-3-11-047073-4. https://books.google.com/books?id=4nBLDwAAQBAJ.
146. ↑ Shoesmith, D. W.; Noel, J. J.; Hardie, D.; Ikeda, B. M. (2000). "Hydrogen Absorption and the Lifetime Performance of Titanium Nuclear Waste Containers". Corrosion Reviews 18 (4–5): 331–360. doi:10.1515/CORRREV.2000.18.4-5.331.
147. ↑ Carter, L.J.; Pigford, T.J. (2005). "Proof of Safety at Yucca Mountain". Science 310 (5747): 447–448. doi:10.1126/science.1112786. PMID 16239463.
148. ↑ "Titanium". 27 June 2025. https://www.sigmaaldrich.com/US/en/sds/aldrich/268496.
149. ↑ "Titanium powder, hydrided". 26 March 2024. https://www.fishersci.com/store/msds?partNumber=AA3667822&productDescription=TITNM+PWR+HYDRIDD+-+99.99+100G&vendorId=VN00024248&countryCode=US&language=en.
150. ↑ Hsu, Ting-Yuan; Lin, Chun-Chen; Lee, Ming-Dar; Chang, Brian Pin-Hsuan; Tsai, Jeng-Daw (2017-01-01). "Titanium Dioxide in Toothpaste Causing Yellow Nail Syndrome" (in en). Pediatrics 139 (1). doi:10.1542/peds.2016-0546. ISSN 0031-4005. PMID 27940507. https://publications.aap.org/pediatrics/article/139/1/e20160546/51867/Titanium-Dioxide-in-Toothpaste-Causing-Yellow-Nail.
151. ↑ Ataya, Ali; Kline, Kristopher P.; Cope, Jessica; Alnuaimat, Hassan (2015). "Titanium exposure and yellow nail syndrome". Respiratory Medicine Case Reports 16: 146–147. doi:10.1016/j.rmcr.2015.10.002. ISSN 2213-0071. PMID 26744684.
152. ↑ Cotell, Catherine Mary; Sprague, J.A.; Smidt, F.A. (1994). ASM Handbook: Surface Engineering (10th ed.). ASM International. p. 836. ISBN 978-0-87170-384-2. https://books.google.com/books?id=RGtsPjqUwy0C.
153. ↑ Compressed Gas Association (1999). Handbook of compressed gases (4th ed.). Springer. p. 323. ISBN 978-0-412-78230-5. https://books.google.com/books?id=WSLULtCG9JgC.
154. ↑ Solomon, Robert E. (2002). Fire and Life Safety Inspection Manual. National Fire Prevention Association (8th ed.). Jones & Bartlett Publishers. p. 45. ISBN 978-0-87765-472-8. https://books.google.com/books?id=2fHsoobsCNwC.

## Bibliography

* Barksdale, Jelks (1968). "Titanium". in Clifford A. Hampel. The Encyclopedia of the Chemical Elements. New York, NY: Reinhold Book Corporation. pp. 732–738. https://archive.org/details/encyclopediaofch00hamp.
* Donachie, Matthew J. Jr. (1988). Titanium: A technical guide. Metals Park, OH: ASM International. p. 11. ISBN 978-0-87170-309-5. https://books.google.com/books?id=Ct9RAAAAMAAJ.
* Emsley, John (2001). "Titanium". Nature's Building Blocks: An A-Z guide to the elements. Oxford, England, UK: Oxford University Press. ISBN 978-0-19-850340-8. https://books.google.com/books?id=j-Xu07p3cKwC.
* Greenwood, N. N.; Earnshaw, A. (1997). Chemistry of the Elements (2nd ed.). Oxford: Butterworth-Heinemann. ISBN 978-0-7506-3365-9.
* Roza, Greg (2008). Titanium (1st ed.). New York, NY: The Rosen Publishing Group. ISBN 978-1-4042-1412-5. https://books.google.com/books?id=rsAGRf7j7fQC.

## External links

* "Titanium: Our Next Major Metal" in Popular Science (October 1950), one of first general public detailed articles on Titanium
* Titanium at Periodic Videos (University of Nottingham)
* Titanium.org: official website of the International Titanium Association, an industry association
* Metallurgy of Titanium and its Alloys \- slide presentations, movies, and other material from Harshad Bhadeshia and other Cambridge University metallurgists

* v
* t
* e

Periodic table

|  | 1 | 2 |  | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

1 | H |  | He
2 | Li | Be |  | B | C | N | O | F | Ne
3 | Na | Mg |  | Al | Si | P | S | Cl | Ar
4 | K | Ca |  | Sc | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn | Ga | Ge | As | Se | Br | Kr
5 | Rb | Sr |  | Y | Zr | Nb | Mo | Tc | Ru | Rh | Pd | Ag | Cd | In | Sn | Sb | Te | I | Xe
6 | Cs | Ba | La | Ce | Pr | Nd | Pm | Sm | Eu | Gd | Tb | Dy | Ho | Er | Tm | Yb | Lu | Hf | Ta | W | Re | Os | Ir | Pt | Au | Hg | Tl | Pb | Bi | Po | At | Rn
7 | Fr | Ra | Ac | Th | Pa | U | Np | Pu | Am | Cm | Bk | Cf | Es | Fm | Md | No | Lr | Rf | Db | Sg | Bh | Hs | Mt | Ds | Rg | Cn | Nh | Fl | Mc | Lv | Ts | Og

| Alkali metal | Alkaline earth metal | Lan­thanide | Actinide | Transition metal | Post-​transition metal | Metalloid | Reactive nonmetal | Noble gas

|
|
|
|
|
|
|
|

* v
* t
* e

Titanium compounds

Titanium(II)|

* TiCl2
* TiH2
* TiO
* TiS
* TiSi2

| Organotitanium(II) compounds|

[(C5H5)2Ti(CO)2]

|

Titanium(III)|

* TiAl
* TiBr3
* TiCl3
* TiF3
* TiI3
* TiN
* TiP
* Ti2O3
* Ti2S3

| Organotitanium(III) compounds|

[(C5H5)2TiCl]2

|

Titanium(IV)|

* TiB2
* TiBr4
* TiC
* TiCl4
* Ti(ClO4)4
* TiF4
* H2TiF6
* TiH4
* TiI4
* Ti(NMe2)4
* Ti(NO3)4
* TiO2
* H4TiO4
* Ti4(OCH2CH3)16
* Ti(OCH(CH3)2)4
* Ti(OCH2CH2CH2CH3)4
* KTiOPO4
* NiO*Sb2O3*20TiO2
* TiS2
* TiSe2
* TiSi2

| Titanate compounds|

* BaTiO3
* Ba2TiO4
* Bi4Ti3O12
* CaTiO3
* CaCu3Ti4O12
* CaZrTi2O7
* Cs2TiO3
* Dy2Ti2O7
* EuBaTiO4
* FeTiO3
* Ho2Ti2O7
* Li2TiO3
* MnTiO3
* Na2Ti3O7
* Na0.5Bi0.5TiO3
* NiTiO3
* PbTiO3
* Pb(Zr,Ti)O3
* SrTiO3
* ZnTiO3

|

Organotitanium(IV) compounds|

* [(C5H5)2TiCl2]
* [(C5H5)2Ti(CH3)2]
* [(C5H5)2TiS5]
* [(C5H5)2Ti(μ-Cl)(μ-CH2)Al(CH3)2]
* [(η5-C5H4-CH2C6H4OCH3)2TiCl2]

|

* v
* t
* e

Titanium minerals

Oxide minerals|

| Simple|

* Anatase
* Brookite
* Geikielite
* Rutile

|

Mixed|

* Aeschynite-(Y)
* Armalcolite
* Betafite
* Euxenite
* Freudenbergite
* Haggertyite
* Ilmenite
* Keilhauite
* Latrappite
* Perovskite
* Polycrase
* Zimbabweite
* Zirconolite
* Zirkelite

Silicate minerals|

* Aenigmatite
* Grossmanite
* Keilhauite
* Lorenzenite
* Melanite
* Nenadkevichite
* Titanite
* Zircophyllite

Other|

* Sabinaite (carbonate mineral)
* Warwickite (borate mineral)

* v
* t
* e

Jewellery

Forms|

* Anklet
* Barrette
* Belt buckle
* Belly chain
* Bindi
* Bolo tie
* Bracelet
* Brooch
* Chatelaine
* Collar pin
* Crown
* Cufflink
* Earring
* Ferronnière
* Lapel pin
* Necklace
* Pectoral
* Pendant
* Ring
* Tiara
* Tie chain
* Tie clip
* Tie pin
* Toe ring
* Watch
* pocket
* strap

Making|

| People|

* Bench jeweler
* Clockmaker
* Goldsmith
* Silversmith
* Jewelry designer
* Lapidary
* Watchmaker

|

Processes|

* Carving
* Casting
* centrifugal
* lost-wax
* vacuum
* Enameling
* Engraving
* Filigree
* Kazaziye
* Metal clay
* Plating
* Polishing
* Repoussé and chasing
* Soldering
* Stonesetting
* Wire sculpture
* Wire wrapped jewelry

Tools|

* Draw plate
* File
* Hammer
* Mandrel
* Pliers

Materials|

| Precious metals|

* Gold
* Palladium
* Platinum
* Rhodium
* Silver

|

Precious metal alloys|

* Britannia silver
* Colored gold
* Crown gold
* Electrum
* Shakudō
* Shibuichi
* Sterling silver
* Argentium sterling silver
* Tumbaga

Base metals|

* Brass
* Bronze
* Copper
* Nickel silver (alpac(c)a)
* Mokume-gane
* Pewter
* Pinchbeck
* Stainless steel
* Titanium
* Tungsten

Mineral gemstones|

* Aventurine
* Agate
* Amazonite
* Amethyst
* Beryl
* Carnelian
* Chrysoberyl
* Chrysocolla
* Diamond
* Diopside
* Emerald
* Fluorite
* Garnet
* Howlite
* Jade
* Jasper
* Kyanite
* Labradorite
* Lapis lazuli
* Larimar
* Malachite
* Marcasite
* Moonstone
* Obsidian
* Onyx
* Opal
* Peridot
* Prasiolite
* Quartz
* Ruby
* Sapphire
* Sodalite
* Spinel
* Sunstone
* Tanzanite
* Tiger's eye
* Topaz
* Tourmaline
* Turquoise
* Variscite
* Zircon

Organic gemstones|

* Abalone
* Amber
* Ammolite
* Copal
* Coral
* Precious coral
* Black coral
* Ivory
* Jet
* Nacre
* Operculum
* Pearl
* Tortoiseshell

Other natural objects|

* Bezoar
* Bog-wood
* Ebonite (vulcanite)
* Gutta-percha
* Hair
* Shell jewelry
* Spondylus shell
* Toadstone

Terms|

* Carat (mass)
* Carat (purity)
* Finding
* Millesimal fineness
* Art jewelry

Related topics
Body piercing
Fashion
Gemology
Phaleristics
Metalworking
Wearable art

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Titanium. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Chemistry:Titanium&oldid=4245268"
*[c.]: circa
*[H228]: Flammable solid
*[P210]: Keep away from heat/sparks/open flames/hot surfaces – No smoking
*[P240]: Ground/bond container and receiving equipment
*[P241]: Use explosion-proof electrical/ventilating/light/…/equipment
*[P280]: Wear protective gloves/protective clothing/eye protection/face protection
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template