Aluminum Model Toys

A built version of the 1953 Studebaker Commander. The 3-in-1 kit was first issued about 1965 and has been reissued several times since. Aluminum Model ToysIndustry| Pre-assembled plastic promotional models

|

Founded| 1948
Founder| West Gallogly, Sr.
Headquarters|

Troy, Michigan

United States

Owner| Round 2 LLC

Aluminum Model Toys, commonly abbreviated as AMT, was a Troy, Michigan-based company that manufactured various pre-assembled plastic promotional models starting in 1948, when attorney West Gallogly, Sr. started it as a side business. Later, a variety of kits became very popular. Most of the company's vehicle products were American cars and trucks in 1:25 scale. In the 1970s, hot rods, customs, trucks and movie and TV vehicles were also produced.

## Contents

* 1 Startup
* 2 Beyond Banthrico
* 3 Promotionals came first
* 3.1 Promotional development
* 3.2 Promotional details
* 3.3 Frictions and Radios
* 3.4 Decline of promotionals
* 4 Then came kits
* 5 Restoration and resin
* 6 Big trucks
* 7 Star Trek and other science fiction
* 8 Fire engines
* 9 AMT today
* 10 References
* 10.1 Citations
* 10.2 Sources
* 11 External links

## Startup

Because Gallogly had solid connections with Ford Motor Company, he was able to place his first models exclusively in Ford dealerships, starting a long promotional relationship (Cawthon 2002). Gallogly's first model was a 1947-1948 Ford Fordor sedan made of cast aluminum and painted with official Ford paint (Cawthon 2002). After issuing successful Ford sedan models, the company set up shop on Eight Mile Road outside Detroit (Chrysler 2008).

In 1949, injection plastic molding became available. After the first Ford aluminum promotional model was offered (Doty 2008, 89), aluminum was abandoned. Different colors of plastic could now be used, so the company name was quietly changed to AMT, which deemphasized the word "aluminum" (Cawthon 2002). For example, AMT's 1949 and 1950 Plymouth sedans were among its first plastic models, along with some Fords. These promos often had wind-up motors which could not be seen through the shiny silver-tinted windows. They had metal chassis and diecast metal chrome-plated bumpers, which were later replaced with chrome-plated plastic. Often, official factory paint colors were applied to the models. The company's first commercial products were pre-assembled plastic promotional models, which were only available through automobile dealerships,

In the early 1950s day-to-day operations of the company were turned over to George Toteff so that Gallogly could better attend to his law firm (Cawthon 2002). Model design was kept in-house, but molding was outsourced. Continental Plastics in Fraser, Michigan, was one of the companies contracted to mold AMT's models (Cawthon 2002).

## Beyond Banthrico

AMT was the most successful company in the mid-1950s to mold accurate plastic models in 1:25 scale and sell them to auto manufacturer dealerships, but it was not the first promotional automobile model maker.

AMT 1959 Mercury 3-in-1 kit. Design, logo, wording and 3-in-1 concept were identical to the SMP brand.

National Products of Chicago, Illinois, starting manufacturing pot metal promotional models in the 1930s. Among their models were the 1934 Studebaker, 1940 and 1941 Buick four-door sedans and a variety of other cars and trucks. National Products was purchased by Banthrico in 1949. Banthrico started making promotional banks of animals and buildings in the 1930s. After World War II, Banthrico continued with a focus on precision metal replica banks of cars, accurately painted, and mostly in 1:25 scale. According to promo aficionado Clarence Young (accessed 2010), these car models were used to display factory car colors to prospective buyers. Through the early 1950s Banthrico was the leader in metal promotional models.

Nevertheless, the use of plastic was on the rise and would become dominant by the mid-1950s. At this time, AMT and its competitors began making plastic promotional models. These companies were Scale Model Products (SMP), Product Miniature Company (PMC), National Products and Ideal Models, which later became Jo-Han because of the name conflict with the Ideal Toy Company. PMC may have been the first to actually produce a model in plastic, but Banthrico, PMC, and others faded while AMT and Jo-Han gained momentum on the promo scene.

Among these companies, SMP of Birmingham, Michigan, is the most significant to AMT. About 1958, SMP started what was to become the plastic modeling craze by introducing the “annual” kit, often with a 3-in-1 theme where the model could be built in stock, custom, or racing versions. Aluminum Model Toys bought SMP in 1961, adopting SMP's 3-in-1 kit idea and the SMP logo, which at the time was a diamond shape (Doty 2007, 86). AMT also adopted some of the SMP kit features when making promotional models. For example the 1959 Imperial came with a detailed chassis and glued-in axle mounts (Doty 1999c, 88). Also, the universally recognizable red rectangle with rounded corners shifted from SMP to AMT with a simple change of the diagonally-formed white letters. Thus, SMP seems to have created the 3-in-1 annual kit and logo, not AMT. AMT then marketed both the SMP and AMT names simultaneously for a couple of years. On promo boxes, the diagonal SMP logo was copied by AMT but that style did not last.

## Promotionals came first

AMT then, through the early 1960s, ruled supreme in the promotional (and kit) market rivaled only by Jo-Han. It is important to compare AMT marketing with that of other plastic model makers. Newcomer MPC (Model Products Corporation) entered the arena in 1964 with their Chevrolet Corvette kit, followed by 1965 promotionals of the Dodge car line. Plastic model makers like Pyro Plastics Corporation and Premier Products came and went, while other kit makers focused on different vehicles. Lindberg rarely touched the promo market. Monogram focused on custom, hot rod, TV, movie, racing cars, aircraft, and ships. Revell did U.S. vehicles, but focused on European Sports and racing cars. Aurora Plastics Corporation diversified, specializing in aircraft, TV, classic Universal Monsters & figure kits. Aurora also made a large range of 1:32 scale and a several 1:25 scale car kits. Palmer Plastics sold a number of American 1:32 scale car models for 98 cents each throughout the 1960s, but these models were poorly detailed and lacked basic features such as clear windows and correct wheel covers.

Importantly, through the 1950s post World War II, plastic gradually became the primary material for the modeling and collecting hobby in the United States. The post-war labor and business environment in the U.S. supported only the simpler casting of cheaper materials for toys, although they could be made with great detail. By contrast the common trend in Europe was making more sophisticated diecast metal zamac toys in smaller sizes with many working features. These were more complex products for a labor structure driven by a densely populated European craft guild environment. Such characteristics were not as prevalent in the United States.

### Promotional development

Promotional makers like AMT worked very closely with styling departments of American automobile manufacturers (Anderson 2003). One fascinating article appearing in Ford Times (1961) chronicled the manufacturing process of AMT models. Intricate drawings and styling models, just like with the real thing, were first constructed. Larger 1:10 or 1:12 scale clay models would be crafted to perfect details. Accurate dies in 1:25 scale, which was the most common, would be made from these for plastic injection. Bumpers and hood ornaments were chrome-plated and bodies were painted, often in factory colors. Painted bodies were baked in ovens, then the models were assembled and packaged.

Often the actual auto manufacturers would pay the cost of tooling. Such costs could range anywhere from $20,000 to $250,000 (Automotive News 1948; Donneley 2009;Ford Times 1961). The model companies were often pressed to get sales, display, paint and promotional details correct in order to offer the models to the “Big Three” before the real vehicles hit the market. Detroit's annual model changes required last minute alterations in model details and showroom displays had to be finished in advance of the actual cars reaching the dealerships (Anderson 2003). One example was AMT’s 1968 Chevy hardtop kit. AMT did not have access to GM’s 1968 details, so the resulting model was not correct (Doty 2000a, p. 88). Another example was the 1960 Ford Falcon promo that was offered in a hardtop, which was not available on the actual car (Doty 2002a, p. 88). Limitations of models offered also sometimes had interesting results. The 1966 Mercury Comet promo came only in a hardtop and that year a convertible paced the Indianapolis 500, so the 500 promo came in any style desired as long as it was a hardtop (Doty 2001, p. 89).

Models were sometimes used in dealerships as display materials that were not generally sold. They were also used to promote sales to customers (Anderson 2003). Models would be used to show prospective customers what new models would look like. Of course, they could also be purchased at the parts counter for around one dollar. Commonly, especially in the 1950s, they were simply given away in the showroom after a test drive, usually to children (Ostrander 2011; Gibson 1970 pp. 44–45). For example, a 1958 Edsel ad prompted "Road Check The Big One, Get A Little One Free" (Feder 1990; see also Clarence Young Autohobby museum).

### Promotional details

1959 Edsel Corsair with warped body panels which were made out of cellulose acetate. Styrene bumpers did not warp.

Though simply cast, promotional models were exquisitely detailed and proportioned, and by 1960, AMT became the main supplier of the pre-assembled model to American car companies. AMT worked most closely with Ford Motor Company and General Motors Corporation, but promo contracts among the model manufacturers seemed to alternate year to year (See Doty 2009a for a nice history of AMT's Ford Galaxie). Shapes of the vehicles were near perfect, though in the 1950s, cellulose acetate, the plastic of choice, was prone to serious warping. In 1960, AMT and some other manufacturers switched to styrene (the brand name being Cycolac, which is actually ABS or alpha butadiene styrene - or rubbery styrene, more flexible and less brittle) and by 1964, all of the major model car manufacturers had changed over to the new plastic. This solved the problem and styrene models 50 years later still maintain their form. 1961 was a key year for the switchover. For example some early 1961 Mercury Monterey two door promos were done in acetate while most for that year were done in the new non-warping Cycolac (Doty 2000b, p. 89).

Models were molded in different colors, but often painted with actual factory paints, a practice that went back to the 1930s. Also, as with the 1964 Pontiac Grand Prix, the roof was cast in "vinyl" black. Script and emblem details were intricately molded into plastic bodies, grilles and wheels. Hoods did not open, there was no engine detail and no interiors on most models in the 1950s. Thus promos without interior or engine detail were called “coaster models” as opposed to kits with more detail. With the development of kits, however, viewing the interior became practical and as important as exterior appearance. Speedometer numbers could be read on the instrument panels. Horn rings on the steering wheels were accurately depicted brand by brand.

1962 Ford Galaxie chassis detail with promotional slogans and specifications

Early on, AMT chassis were often made of metal, but later, they were usually a single piece of plastic with lower engine, exhaust and suspension details molded in a single piece with metal axles fitted through holes in the sides of the plastic. Normally, on the chassis, there were no operating suspension parts. Wheels were one-piece plastic pressed onto the axles. With parts typically "melted" together, forming a permanent bond, promotional models were much more durable than their counterpart assembled kits. Of course, promotionals were simpler and had fewer parts than kits which were a later marketing ploy to enhance sales. Hoods did not normally open and suspension details were molded into the chassis. One exception to this was the 1962 Ford Fairlane promo which had an opening hood and a detailed engine (Doty 1999a, pp. 88-89). Beyond this, extras were not often built in, but there were occasional surprises like the button on the 1959 "Wide Track" Pontiacs which pushed the wheels inward toward the body to simulate how wide the new cars were (Doty 1999b, p. 87).

Seats were often, but not always, part of the single bucket of the interior whereas they were usually separate parts in kits. Many promotional models have survived intact for decades, whereas assembled kits tend to fall apart as the plastic cement deteriorates and small parts fall off, unless they were "solvent welded" with acetone or some other specific solvent for ABS. What was really fun was, AMT's common molding of sales specifications into the chassis, especially on Ford cars. The promo 1962 Ford Galaxie, for example, had thirteen different phrases molded on the chassis, from the very factual "Vacation Volume Trunk-28 Cubic Feet" to the more fanstastical "Galaxie, Silent As A Secret" or "Enduring Elegance With The Power To Please”.

Beginning collectors may try to simply identify a year of a promo from its license plate, but not all promos followed this tradition. 1970 and 1971 Thunderbirds had no year-stamped license plates, so telling them apart can be difficult (Doty 1999c, p. 89).

### Frictions and Radios

Commercial versions of AMT promos were marketed in retail toy and dime stores like Zayre and Murphy. A few, in the mid-1950s, like the 1954 Buick Roadmaster, 1954 Ford Customline sedan or the 1955 Sunliner, were also offered in remote control versions (Doty 2003, p.88; Doty 2004a, pp. 86-87). In the 1960s they were commonly sold for $1.00. Jo-Han also offered friction models at that time.

Differences of retail friction models from the dealer promos were the lack of manufacturing paint schemes (they were simply molded in different colors, like many other promotionals) and usually had the addition of a friction motor located on the front axle, noticeable by the studded white vinyl gear that protruded around the axle (and through the oil pan)(see Gibson, p. 45). By contrast, the promo version often had a special lower engine plate that covered where the friction motor was placed on the commercial model. Early on, some cars, such as the 1953 Studebaker Commander promo, had the addition of acetate windows, while the friction powered model was windowless (Doty 2000b, p. 88).

As collectibles today, the friction powered models are worth somewhat less than official promos, but the quaintness of the frictions makes them equally appealing. Nevertheless, not all models offered as promotionals were also made as commercial frictions, like the 1964 Comet Caliente which came as a dealer promo only. Conversely, some dealer promotionals like the 1961 Falcons, did come with friction motors but were painted in dealer colors (Doty 2002a, p 88). Like promotionals, friction car models are extremely durable, using the same basic plastic components as the promos.

Slightly different were unassembled versions of the promo cars, like the AMT 1971 Ford Torino. These were typically simpler and easier to assemble than the full blown kits. In fact, before the 3-in-1 kits discussed below, promos were offered as kits without all the extra custom and hot rod parts (Doty 2004b, p. 88). These were sometimes molded in color instead of the traditional white for the kits and easily assembled without glue.

Some cars were only manufactured as frictions or kits, but not promotional models. One example is the 1968 Ford XL Fastback, which was available only in bright yellow as a friction, or as an annual kit molded in the standard white color. However, the 1967 and 1969 XL were available as promos. Other cars were available as frictions and promos, but not kits. An example of this is the 1963 Ford Galaxie 500/XL "boxtop" square-roof hardtop. Some versions were only available in some forms as hardtops, others as convertibles. Also, some models were made with built-in radios, like the 1967-1968 Ford Thunderbirds. These generally do not hold as much value as promos or frictions (Doty 1999c, p. 88).

### Decline of promotionals

Gradually, perhaps since the mid-1960s, the importance of promotionals began to dwindle. AMT produced their last dealer promos for the 1972 model year and by the late 1970s, plastic promos were mostly a thing of the past (Anderson 2003). AMT, along with MPC and Jo-Han, continued to produce promotionals until the 1980s, but it was not the enterprise it once was. Eventually models were offered only for the most sporty or prestigious cars and sold in dealerships for steep prices and not given away, so the term “promotional” hardly applied any longer. Also, the auto companies, which earlier had seen promotional models as easy and free advertising, began to charge fees to modeling companies in the late 1980s for the use of their names and designs (Clor 1990). Thus smaller companies had a more difficult time affording manufacturing licensing.

Models began to appear in dealerships in metal by Ertl, Brookfield, and even Maisto, and in scales other than 1:25. Through the 1990s, AMT/Ertl continued some plastic promotionals in the traditional fashion, though metallic flake molded into the plastics was a new twist. These models were now made in China and were mainly Corvettes and Vipers. Plastic promotionals still exist, like the AMT/Ertl 2008 Dodge Challenger, but it costs at least $25.00.

## Then came kits

AMT 3 in 1 1957 Thunderbird kit instructions. Notice the distinction made between “customizing” and “stylizing”.

It is important to remember that in the 1950s promotional models came first, followed by kit development. Jim Donnelly, of Hemmings Classic Car wrote, "...once companies realized that built up promos were already licensed, they could be reintroduced as assembly kits" (Donnelly 2009).

Like most plastic model kits, AMT’s parts were molded onto "trees" and could be separated easily for assembly. Kits of cars in stock form were soon augmented with parts to build custom and hot rod versions. Thus, the annual promotional model was also offered in kit form as an extra sales benefit. As mentioned above, this configuration was soon named the “3-in-1” kit where the modeler could build a car in stock, custom, or hot rod versions by selecting different parts included in the box. Some of AMT's first successful kits were of 1932 and other early Fords. These were reissued several times over the years (Doty 2009b,87).

Unlike promotional models which had sealed hoods, no engine detail and basic suspension detail molded into the chassis, kits usually had opening hoods, full engine detail, complete interiors and detailed multi-part suspensions. Earlier kits had less chassis detail and featured promo-like interiors, metal axles, whitewall tires and screws to attach the body to the chassis. Later kits often had more detail but metal parts such as axles, screws and hood clips were either deleted or made of plastic instead. Miniature whitewall tires, which were once a regular feature of kits, became outdated and modern blackwall tires took their place as they did on actual cars.

AMT George Barris design "Ala Kart" 1:25 scale built kit.

Sometimes the same box design was used to package different kits. For example, the 1961 Pickup kit box illustrated both the Ford and the Chevy, but the kit inside the box was identified by a label affixed to the outside. In the early 1960s AMT's 3-in-1 Trophy kit instructions usually came with short biographies of popular customizers of the day such as Bill Cushenberry, Dean Jeffries, Alex Kraus, Gene Winfield, the Alexander Brothers and of course George Barris, most of whom were employed by AMT. Gene Winfield even closed his California shop to work with AMT (Cawthon 2002). Also, instruction sheets for some kits had a section with customizing hints by George Barris exclusively. An extreme example was the 1957 Ford Thunderbird kit. The instructions included five pages devoted to “stylizing”, a practice of adding parts by using body putty and sanding which went beyond ordinary customizing. Included in the '57 T-Bird kit were additional street rod, drag and Bonneville styling ideas all suggested by George Barris.

By 1965 AMT and other kit manufacturers had made significant changes to their product lines. Although dealer-oriented promotionals were their lead business, by the mid-1960s most manufacturers developed a whole new market by tapping into customizing and customizers. These were often linked to TV and Movie themes which now drove AMT and other model companies.

AMT offered some foreign car kits, but usually only if they were associated with U.S. car companies or a film favorite. An example was the 1971 Opel GT, a General Motors product made in Germany. Foreign car kits were left to other manufacturers such as Monogram or Revell. Custom TV and movie cars, often designed by George Barris, like the ZZR (from the 1966 beach movie Out Of Sight)or the Monkeemobile, were also popular.

By the early to mid-1960s, modeling had exploded in popularity and kit sales easily overcame that of promotionals. Model Products Corporation, known as MPC, entered the promotional and kit scene in 1965 and by 1970 was just as popular as AMT. To fight back, AMT started offering kits for an even wider variety of machines and themes.

## Restoration and resin

Today, because of the high value of old promotional, friction and annual kit cars in 1:25 scale, a “cottage industry” boom has taken place. Parts for these valuable old cars are being cast in high-quality resin and sold online by such vendors as The Modelhaus, R & R Resin and Star Models. A skilled modeler can now restore a broken promo that was played with as a toy decades ago to like-new condition. Such parts as hood ornaments, wheels, tires, and even windshield frames from delicate convertibles are available. Parts that were originally chrome-plated are available pre-chromed for easy restoration.

In addition to parts, complete resin kits in the original 1:25 scale are also available. These are typically reproductions of original promos and include many of the features of the original kit including whitewall tires, metal axles and hoods molded into the body. A good example of a reproduction kit in resin is the 1960 Edsel hardtop. Some offerings are models that were never available when the kits were first issued. For example, Modelhaus offers a 1:25 scale resin model of the 1973 Chevrolet Caprice Estate Wagon, based on the original Caprice hardtop promo. These new issues typically sell at rather high prices, often $50 to $100 each.

## Big trucks

In the 1960s, competition forced diversification and AMT added new product lines, specifically trucks. For example, its early Dirt Hauler kit was merely a generic tractor-trailer with dumping trailer. Then, in 1969, AMT released the California Hauler 359 kit. This new kit was a revolution for model building, a realistic model of a Peterbilt 359 tractor-trailer, the design having been copied from the manufacturer's specifications. It also had an authentic 8V71 Detroit Diesel engine under the hood. The kit lacked a sleeper cab, but there was a coupon that could be sent in along with ten cents to get it. The following year, the second version was issued with a sleeper cab. Due to the success of the California Hauler 359, AMT proceeded to issue more truck kits through the 1970s. Examples of offerings were the Chevrolet Titan/GMC Astro, Peterbilt 352, Kenworth W925, Autocar A64B and White Road Boss. Trailer kits to accompany these trucks, such as box, flatbeds, refrigerated and tankers were introduced. These kits tended to cost about $5.

When the TV series Movin' On debuted in 1974, AMT made new versions of many of their truck kits with new features such as CB radios, dragfoilers and sometimes new engines. For example the Peterbilt 359 kit was given a Cummins NTC-350 diesel engine, a larger-windowed 1100 series cab (as opposed to the small-windowed Unilite cab) and a larger bumper in addition to the previously mentioned CB radio and dragfoiler.

When Ertl bought AMT in 1983 (forming AMT-Ertl), many of AMT's old truck kits were reissued, but completely new models were rare except for the Kenworth T600A (1991). In addition, some of Ertl's plastic model truck kits were reissued under the AMT-Ertl brand. Many of the old AMT truck kits can be found on auction sites like eBay, often commanding fairly high prices.

##  Star Trek and other science fiction

In July 1966 previews began to air for Star Trek, which were seen by executives at AMT. They sought a contract to produce model kits based on the starships and other props seen in the series. A contract was signed between AMT and Desilu on August 1, 1966, stipulating that kits based on the Enterprise could be made in exchange for AMT providing a full-scale exterior of a Galileo shuttle and an interior filming set (Cushman p. 304). The prop measured 22 feet (6.7 m) long and 8 feet (2.4 m) tall. It was built by Gene Winfeld, a specialty car designer (Cushman p. 304) from blueprints created by Thomas Kellogg. (Cushman p. 307)

Around 1966 AMT obtained the plastic model rights to Star Trek and developed a model kit of the Starship Enterprise, beginning a long association between AMT, science fiction and television. AMT's 1966 Enterprise model is one of the company's highest-selling kits.[1] The original model of the Enterprise was equipped with battery-operated lights, but even after the lights were deleted, a number of features from the lighted model persisted in the kit, including a removable main deflector assembly which had covered the battery compartment and served as an on-off switch for the lighted model. There were also little indentations in the saucer section where the light bulbs were to be placed. By the 1980s an ongoing series of revisions to the tooling to correct various inaccuracies, which unfortunately created a few new inaccuracies, such as a deflector dish that is far too small and nacelle caps which are shaped incorrectly. There was also a kit of the Klingon D-7 Battlecruiser ship seen on the TV show. It too was lighted in its first couple of issues.

By the mid-1970s the Enterprise kit had been joined by a 1:12 scale figure of Spock defending himself against a three-headed reptile on an alien landscape, as well as models of a Romulan Bird Of Prey ship, a Starfleet Shuttlecraft, the Enterprise Bridge, the K-7 Space Station from the episode “The Trouble With Tribbles” and a three-piece Exploration Set consisting of approximately 3/4 scale, toylike models of a phaser, communicator and tricorder. Round 2 has reissued the Spock model, the Romulan Bird Of Prey ship, the Enterprise and the K-7 Space Station, all from the original AMT molds. The Klingon ship was reissued in 2011 and most of the other AMT Star Trek kits are scheduled to be reissued by Round2.

In 1968 AMT also produced a kit of a science fiction spaceship Leif Erickson designed by Matt Jeffries, the designer of the Enterprise and Klingon ships for Star Trek. This tooling was reused in the middle 1970s, albeit without several engine and ship parts as well as the original stand and the landing gear to the scout ship, to produce a glow-in-the-dark "UFO" kit. The glow-in-the-dark UFO model was reissued in 2010 by Round2 from the original molds, this time including the missing ship parts and the scout ship landing gear but still missing some engine parts on the main ship, as well as the original display stand. The Leif Ericson model was reissued in 2011.

AMT-Ertl has also reissued the former Model Products Corporation kits of various Star Wars spacecraft and has added several new designs based on the prequel trilogy.

## Fire engines

In 1971 AMT issued models of at least three different pieces of American LaFrance fire-fighting apparatus, including a pumper, a rear-mount aerial ladder truck and a rear-mount articulating boom truck. The prototypes were selected allow part sharing among the kits to minimize tooling costs. All three kits have been reissued by AMT-Ertl in recent years.

Surprisingly, given the company's penchant for licensing various television series, they did not offer models of any of the vehicles from the then-current Emergency TV series, such as the Crown Firecoach that was the first Engine 51, the Ward LaFrance P80 Ambassador that was the second Engine 51 or the Dodge rescue squad vehicle. Oddly, none of the decals supplied with the American LaFrance kits included markings for the Los Angeles County Fire Department that was also featured in the series. In addition, they also released a Chevrolet fire chief's car and a Chevrolet rescue van, the latter of which could be built in stock, custom, fire department or police department configurations.

## AMT today

In 1978, British Lesney, makers of Matchbox diecast vehicles, bought AMT and moved the company to Baltimore, closing the Maple Road facility in Troy, Michigan (just outside Detroit). (Cawthon 2002). By this time, prices of plastics had increased and Detroit was squeezed by government regulations of safety, emissions and fuel economy. Detroit sponsored fewer and fewer promotionals so model companies depended more on kits but the model building hobby declined as well. Also, AMT had an incredible display of models and documentary history at its headquarters that was scattered at that time (Anderson 2003).

In 1983 AMT was purchased by Ertl from Lesney and renamed AMT-Ertl. AMT-Ertl then had a twenty-four year relationship until AMT was sold in 2007. For a time, AMT kits were reissued by independent companies such as Stevens International and Model King, before AMT came solidly into the stable of Round 2, LLC of South Bend, Indiana. In an ironic turn that parallels other large companies, AMT now co-exists in the same organization alongside a revived MPC and Polar Lights. Ertl is still in the Round 2, LLC stable as Ertl Collectibles.

In the early 1990s AMT released brand new kits with new tooling for some of their old favorites, such as the 1955 Chevrolet Bel Air, 1966 Ford Fairlane GT, 1958 Edsel Pacer, 1960 Ford Starliner and 1957 Chrysler 300. These kits sold fairly well and can still be found on auction sites such as eBay at reasonable prices. The details in these kits far exceeded any from the 1960s. In the late 1990s AMT did something new in releasing pre-assembled and painted versions of these kits. These assembled models were sold as the Masterpiece Series and were nicely packaged in foam, similar to heavier diecast metal Franklin Mint or Danbury Mint models. Each had a Certificate of Authenticity enclosed. These models were beautifully finished and featured whitewall tires along with very detailed and authentically painted engines, suspensions and interiors, much more detailed than any promotional ever was, although these seem to be oriented to the adult collector and not the possible customer. Selections included a 1957 Chrysler 300C, 1960 Ford Starliner, 1962 Chevrolet Impala SS convertible, 1962 Pontiac Catalina SD421, 1966 Buick Riviera and a few others (Doty 2002b, p. 87). These ultra detailed models can still be had for less than $30.00 today on eBay and are one of the best bargains around. As assembled kits they were factory-glued together, but the glue used appears to be of high quality and when cared for properly they can be kept in good condition for years.

Today, Round 2 is making a determined effort to recreate some of the 1960s glory of the model car business. Reissued classics such as the 1962 Buick Electra 225 and the 1961 Ford Galaxie Skyline kits are now available with many of the original features including whitewall tires, metal axles, chassis screws, and molded-in suspension detail. Often the same exact artwork as when the kits originally appeared is reproduced for the new boxes. These reissues cost about $20.00, which is not unreasonable based on the value of the dollar today versus the early 1960s.

A few 1950s and 1960s models were reproduced and sold as promotionals featuring the sturdiness of the original 1960s promos in the late 1990s and early 2000s. These included the 1966 Ford Fairlaine GT/A (based on the new tool), the 1964 Ford Galaxie 500/XL hardtop (based on the original tool) and the 1953 and 1954 Corvettes.

Today certain AMT kits and promotionals, especially models from the 1960s, command premium prices on the collector market. Typically, original muscle car promos such as Mustangs, Pontiac GTOs, Camaros and Chevelles command prices in the hundreds of dollars in mint, boxed original condition. Even full-size models of GM cars such as Chevrolet Impalas, Pontiac Bonnevilles and Grand Prixs also garner high prices. Such models, like the reissued kits, are easily obtainable through Internet auction sites such as Ebay.

## References

### Citations

1. ↑ Kelly, Scott (2008). Star Trek The Collectibles. Iola, WI: Krause Publications. pp. 169.

### Sources

* Anderson, Art. 2003. History of Promo Car Models? Antique Automobile Club of America on-line forums. [1]
* Automotive News. 1948. Assembly Lines of a New Type Gain Favor. September 27.
* Cawthon, Bill. 2002. 3 in 1:87, Promotex Online Articles, December 15.
* Chrysler Museum. 2008. Display text. Model display in museum basement. Auburn Hills, Michigan.
* Clor, John M. 1990. Squeeze Play, AutoWeek, December 3, pp. 17–19.
* Cushman, Marc These are the Voyages: TOS, Season One 2013 Jacobs Brown Press = San Diego, CA
* Donnelly, Jim. 2009. Promoting the Past, Hemmings Classic Car, April, P. 37.
* Doty, Dennis. 1999a. Speedsters Fast and Furious, Collectible Automobile, 15/5:88-90.
* Doty, Dennis. 1999b. Sedan Deliveries by the Dozens, Collectible Automobile, 15/6:86-89.
* Doty, Dennis. 1999c. Crowning Achievements in Little Imperials, Collectible Automobile, 16/2:88-90.
* Doty, Dennis. 2000a. Shades of Difference, Collectible Automobile, 17/4:87-89.
* Doty, Dennis. 2000b. Generous with Jaguars, Collectible Automobile, 16/5:88-90.
* Doty, Dennis. 2001. Some New Oldsmobiles, Collectible Automobile, 18/288-90.
* Doty, Dennis. 2002a. Soaring With the Falcons, Collectible Automobile, 18/6: 88-90.
* Doty, Dennis. 2002b. Rampant Horsepower, Collectible Automobile, 19/1:87-90.
* Doty, Dennis. 2003. Looking Back on Little Cadillacs, Collectible Automobile, 20/3:87-89.
* Doty, Dennis. 2004a. '54s for Every Taste, Collectible Automobile, 20/5:86-89.
* Doty, Dennis. 2004b. 'Birds in the Hand, Collectible Automobile, 21/1:88-90.
* Doty, Dennis. 2007. A Ton of '61s, Collectible Automobile, 24/3:86-89.
* Doty, Dennis. 2008. Ta-da! Here Are Some TDs, Collectible Automobile, 24/6:88-90.
* Doty, Dennis. 2009a. You Might Need Another Shelf!, Collectible Automobile, 25/5:96-89.
* Doty, Dennis. 2009b. A Mountain of Models to Scale, Collectible Automobile, 25/6:86-89.
* Feder, Ann. 1990. Preoccupied by Promotionals, AutoWeek, December 3, pp. 20–21.
* Ford Times. 1961. Treasure in the Toy Box? February.
* Gibson, Cecil. 1970. Commercial Vehicles. A book of the Troy Model Club Series. Thomas Nelson and Sons, Ltd. London, United Kingdom.
* Ostrander, Steve. 2011. Michigan Scale Model Companies, in Seeking Michigan, an on-line source of the Michigan Historical Museum. [2]
* Young, Clarence. 2010. Clarence Young Autohobby website. Accessed February 5.

## External links

* AMT website
* Clarence Young Autohobby
* Leif Ericson plastic model

0.00

(0 votes)

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Company:Aluminum_Model_Toys&oldid=223951"