Global Engine Alliance

Dundee Engine Plant
formerly Global Engine Alliance LLCGEMA corporate logo

Type| Joint venture
Industry| Automotive engineering
Founded| May 2002
Headquarters| Dundee, Michigan

Key people

| Bruce A. Braumbach (General Manager)
Products| Engines
Parent| Chrysler
Website| GEMAengine.com

Global Engine Alliance LLC, began as a joint venture of Chrysler, Mitsubishi Motors, and Hyundai Motor Company for developing a line of shared engines.

In September 2009, Chrysler purchased Mitsubishi and Hyundai's shares, after 5 years of allied research and development, making its Dundee, Michigan plant a wholly owned subsidiary of what was then Chrysler Group LLC.[1][2][3][4][5][6]

## Contents

* 1 Global Engine Manufacturing Alliance
* 2 Design
* 3 See also
* 4 References
* 5 External links

## Global Engine Manufacturing Alliance

Global Engine Manufacturing Alliance, LLC (GEMA) was the manufacturing arm of the Global Engine Alliance and consisted of five factories worldwide. Production began in 2005, with an annual capacity of approximately two million engines; each plant was capable of producing 420,000. Twenty different automobile models from the three companies were to use the engines. Chrysler had expected to use GEMA engines in ten models and projects, and buy up to 840,000 GEMA engines annually.

The Dundee plants were purchased by Chrysler in December, 2012, and renamed the Chrysler Dundee Engine Plant(s).[7] After Chrysler's assimilation into FCA, the plant simply became known as the Dundee Engine Plant.

## Design

Hyundai was initially responsible for leading the design of the base engine, while the Chrysler Group and Mitsubishi were involved in making other important engineering contributions pertaining to the design.[8] The design features Siamese bores, an aluminium block with cast-iron cylinder liners, and an aluminium head. Different cylinder liners could be fitted to increase or decrease displacement depending on manufacturers needs. Each manufacturer configured their variants of the initial design differently based on their engineering needs and standards, so consumers may experience very different power, fuel efficiency, and "feel" from each manufacturer.

## See also

* Chrysler World engine - Chrysler's GEMA built engines
* Mitsubishi 4B1 engine - Mitsubishi's GEMA built engines
* Hyundai Theta engine - Hyundai's GEMA built engines

## References

1. ↑ "GEMA takes off: although some people think that the only place to build new manufacturing plants in the U.S. is in the southern states, a team of global companies has constructed one of the most flexible powertrain plants in the world in Michigan. Why? One answer is talent", Kevin M. Kelly, Automotive Design & Production, October 2005, FindArticles.com, 18 November 2007
2. ↑ "Looking @ DCX's Global Engine" , Automotive Design and Production, February 2005 issue
3. ↑ "Global Engine Manufacturing Alliance World Engine Plant: Open for Business", Global Engine Alliance LLC press release, October 3, 2005. Retrieved on September 1, 2006.
4. ↑ "DaimlerChrysler, Hyundai, and Mitsubishi Motors to Form Global Engine Alliance" , Mitsubishi Motors website
5. ↑ "Lean and Flexible Manufacturing", Waurzyniak, Patrick, Manufacturing Engineering, September 2006, FindArticles.com, 18 November 2007
6. ↑ "Chrysler Buys GEMA Stakes from Mitsubishi and Hyundai" , Holmes, Jake, Car and Driver Blog, September 2009
7. ↑ "FCA US Media - Dundee Engine Plant". media.fcanorthamerica.com (Press release). Retrieved 2019-09-01.[|permanent dead link|dead link}}]
8. ↑ Noria Corporation. "Global Engine Manufacturing Alliance opens new plant" (in en). Reliable Plant. https://www.reliableplant.com/Read/3001/global-engine-manufacturing-alliance-opens-new-plant.

## External links

* Official site

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Global Engine Alliance. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Company:Global_Engine_Alliance&oldid=784511"