Compare-and-swap

Short description: Atomic computer processor instruction

In computer science, compare-and-swap (CAS) is an atomic instruction used in multithreading to achieve synchronization. It compares the contents of a memory location with a given (the previous) value and, only if they are the same, modifies the contents of that memory location to a new given value. This is done as a single atomic operation. The atomicity guarantees that the new value is calculated based on up-to-date information; if the value had been updated by another thread in the meantime, the write would fail. The result of the operation must indicate whether it performed the substitution; this can be done either with a simple boolean response (this variant is often called compare-and-set), or by returning the value read from the memory location (not the value written to it), thus "swapping" the read and written values.

## Contents

* 1 Overview
* 1.1 Example application: atomic adder
* 1.2 ABA problem
* 1.3 Costs and benefits
* 2 Implementations
* 2.1 Implementation in C
* 3 Extensions
* 4 See also
* 5 References
* 6 External links

## Overview

A compare-and-swap operation is an atomic version of the following pseudocode, where * denotes access through a pointer:[1]

function cas(p: pointer to int, old: int, new: int) is
if *p ≠ old
return false

*p ← new

return true

This operation is used to implement synchronization primitives like semaphores and mutexes,[1] as well as more sophisticated lock-free and wait-free algorithms. Maurice Herlihy (1991) proved that CAS can implement more of these algorithms than atomic read, write, or fetch-and-add, and assuming a fairly large[clarification needed] amount of memory, that it can implement all of them.[2] CAS is equivalent to load-link/store-conditional, in the sense that a constant number of invocations of either primitive can be used to implement the other one in a wait-free manner.[3]

Algorithms built around CAS typically read some key memory location and remember the old value. Based on that old value, they compute some new value. Then they try to swap in the new value using CAS, where the comparison checks for the location still being equal to the old value. If CAS indicates that the attempt has failed, it has to be repeated from the beginning: the location is re-read, a new value is re-computed and the CAS is tried again. Instead of immediately retrying after a CAS operation fails, researchers have found that total system performance can be improved in multiprocessor systems—where many threads constantly update some particular shared variable—if threads that see their CAS fail use exponential backoff—in other words, wait a little before retrying the CAS.[4]

### Example application: atomic adder

As an example use case of compare-and-swap, here is an algorithm for atomically incrementing or decrementing an integer. This is useful in a variety of applications that use counters. The function add performs the action *p ← *p + a, atomically (again denoting pointer indirection by *, as in C) and returns the final value stored in the counter. Unlike in the cas pseudocode above, there is no requirement that any sequence of operations is atomic except for cas.

function add(p: pointer to int, a: int) returns int
done ← false
while not done
value ← *p  // Even this operation doesn't need to be atomic.
done ← cas(p, value, value + a)

return value + a

In this algorithm, if the value of *p changes after (or while!) it is fetched and before the CAS does the store, CAS will notice and report this fact, causing the algorithm to retry.[5]

### ABA problem

Main article: ABA problem

Some CAS-based algorithms are affected by and must handle the problem of a false positive match, or the ABA problem. It is possible that between the time the old value is read and the time CAS is attempted, some other processors or threads change the memory location two or more times such that it acquires a bit pattern which matches the old value. The problem arises if this new bit pattern, which looks exactly like the old value, has a different meaning: for instance, it could be a recycled address, or a wrapped version counter.

A general solution to this is to use a double-length CAS (DCAS). E.g., on a 32-bit system, a 64-bit CAS can be used. The second half is used to hold a counter. The compare part of the operation compares the previously read value of the pointer and the counter, with the current pointer and counter. If they match, the swap occurs - the new value is written - but the new value has an incremented counter. This means that if ABA has occurred, although the pointer value will be the same, the counter is exceedingly unlikely to be the same (for a 32-bit value, a multiple of 232 operations would have to have occurred, causing the counter to wrap and at that moment, the pointer value would have to also by chance be the same).

An alternative form of this (useful on CPUs which lack DCAS) is to use an index into a freelist, rather than a full pointer, e.g. with a 32-bit CAS, use a 16-bit index and a 16-bit counter. However, the reduced counter lengths begin to make ABA possible at modern CPU speeds.

One simple technique which helps alleviate this problem is to store an ABA counter in each data structure element, rather than using a single ABA counter for the whole data structure.

A more complicated but more effective solution is to implement safe memory reclamation (SMR). This is in effect lock-free garbage collection. The advantage of using SMR is the assurance a given pointer will exist only once at any one time in the data structure, thus the ABA problem is completely solved. (Without SMR, something like a freelist will be in use, to ensure that all data elements can be accessed safely (no memory access violations) even when they are no longer present in the data structure. With SMR, only elements actually currently in the data structure will be accessed).

### Costs and benefits

CAS, and other atomic instructions, are sometimes thought to be unnecessary in uniprocessor systems, because the atomicity of any sequence of instructions can be achieved by disabling interrupts while executing it. However, disabling interrupts has numerous downsides. For example, code that is allowed to do so must be trusted not to be malicious and monopolize the CPU, as well as to be correct and not accidentally hang the machine in an infinite loop or page fault. Further, disabling interrupts is often deemed too expensive to be practical. Thus, even programs only intended to run on uniprocessor machines will benefit from atomic instructions, as in the case of Linux's futexes.

In multiprocessor systems, it is usually impossible to disable interrupts on all processors at the same time. Even if it were possible, two or more processors could be attempting to access the same semaphore's memory at the same time, and thus atomicity would not be achieved. The compare-and-swap instruction allows any processor to atomically test and modify a memory location, preventing such multiple-processor collisions.

On server-grade multi-processor architectures of the 2010s, compare-and-swap is cheap relative to a simple load that is not served from cache. A 2013 paper points out that a CAS is only 1.15 times more expensive than a non-cached load on Intel Xeon (Westmere-EX) and 1.35 times on AMD Opteron (Magny-Cours).[6]

## Implementations

Compare-and-swap (and compare-and-swap-double) has been an integral part of the IBM 370 (and all successor) architectures since 1970. The operating systems that run on these architectures make extensive use of this instruction to facilitate process (i.e., system and user tasks) and processor (i.e., central processors) parallelism while eliminating, to the greatest degree possible, the "disabled spinlocks" which had been employed in earlier IBM operating systems. Similarly, the use of test-and-set was also eliminated. In these operating systems, new units of work may be instantiated "globally", into the global service priority list, or "locally", into the local service priority list, by the execution of a single compare-and-swap instruction. This substantially improved the responsiveness of these operating systems.

In the x86 (since 80486) and Itanium architectures this is implemented as the compare and exchange (CMPXCHG) instruction (on a multiprocessor the LOCK prefix must be used).

As of 2013, most multiprocessor architectures support CAS in hardware, and the compare-and-swap operation is the most popular synchronization primitive for implementing both lock-based and non-blocking concurrent data structures.[4]

The atomic counter and atomic bitmask operations in the Linux kernel typically use a compare-and-swap instruction in their implementation. The SPARC-V8 and PA-RISC architectures are two of the very few recent architectures that do not support CAS in hardware; the Linux port to these architectures uses a spinlock.[7]

### Implementation in C

Many C compilers support using compare-and-swap either with the C11 `<stdatomic.h>` functions,[8] or some non-standard C extension of that particular C compiler,[9] or by calling a function written directly in assembly language using the compare-and-swap instruction.

The following C function shows the basic behavior of a compare-and-swap variant that returns the old value of the specified memory location; however, this version does not provide the crucial guarantees of atomicity that a real compare-and-swap operation would:

int compare_and_swap(int* reg, int oldval, int newval)

ATOMIC();
int old_reg_val = *reg;
if (old_reg_val == oldval)
*reg = newval;
END_ATOMIC();
return old_reg_val;

`old_reg_val` is always returned, but it can be tested following the `compare_and_swap` operation to see if it matches `oldval`, as it may be different, meaning that another process has managed to succeed in a competing `compare_and_swap` to change the reg value from `oldval`.

For example, an election protocol can be implemented such that every process checks the result of `compare_and_swap` against its own PID (= newval). The winning process finds the `compare_and_swap` returning the initial non-PID value (e.g., zero). For the losers it will return the winning PID.

This is the logic in the Intel Software Manual Vol 2A:

bool compare_and_swap(int *accum, int *dest, int newval)

if (*accum == *dest) {
*dest = newval;
return true;
} else {
*accum = *dest;
return false;

## Extensions

Since CAS operates on a single pointer-sized memory location, while most lock-free and wait-free algorithms need to modify multiple locations, several extensions have been implemented.

Double compare-and-swap (DCAS)
Compares two unrelated memory locations with two expected values, and if they're equal, sets both locations to new values. The generalization of DCAS to multiple (non-adjacent) words is called MCAS or CASN. DCAS and MCAS are of practical interest in the convenient (concurrent) implementation of some data structures like deques or binary search trees.[10][11] DCAS and MCAS may be implemented however using the more expressive hardware transactional memory[12] present in some recent processors such as IBM POWER8 or in Intel processors supporting Transactional Synchronization Extensions (TSX).
Double-wide compare-and-swap
Operates on two adjacent pointer-sized locations (or, equivalently, one location twice as big as a pointer). On later x86 processors, the CMPXCHG8B and CMPXCHG16B instructions[13] serve this role, although early 64-bit AMD CPUs did not support CMPXCHG16B (modern AMD CPUs do). Some Intel motherboards from the Core 2 era also hamper its use, even though the processors support it. These issues came into the spotlight at the launch of Windows 8.1 because it required hardware support for CMPXCHG16B.[14]
Single compare, double swap
Compares one pointer but writes two. The Itanium's cmp8xchg16 instruction implements this,[15] where the two written pointers are adjacent.
Multi-word compare-and-swap
Is a generalisation of normal compare-and-swap. It can be used to atomically swap an arbitrary number of arbitrarily located memory locations. Usually, multi-word compare-and-swap is implemented in software using normal double-wide compare-and-swap operations.[16] The drawback of this approach is a lack of scalability.
Persistent compare-and-swap
Is a combination of persist operation and the normal compare-and-swap. It can be used to atomically compare-and-swap a value and then persist the value, so there is no gap between concurrent visibility and crash visibility. The extension solves the read-of-non-persistent-write problem.[17]
Versioned compare-and-swap
Stores a history of previous values of the memory location, with timestamps, to allow a process to obtain a consistent view (or snapshot) of the values that were stored in multiple locations at an earlier time. This extension can be implemented from ordinary compare-and-swap instructions.[18]

## See also

* Conditional Put and Delete
* Fetch-and-add
* Load-link/store-conditional
* Non-blocking synchronization
* Read–modify–write
* Test-and-set
* Transactional memory
* Treiber stack

## References

1. ↑ 1.0 1.1 Mullender, Sape; Cox, Russ (2008). "Semaphores in Plan 9". 3rd International Workshop on Plan 9. http://doc.cat-v.org/plan_9/IWP9/2008/iwp9_proceedings08.pdf#page=62.
2. ↑ Herlihy, Maurice (January 1991). "Wait-free synchronization". ACM Trans. Program. Lang. Syst. 13 (1): 124–149. doi:10.1145/114005.102808. https://www.cs.brown.edu/~mph/Herlihy91/p124-herlihy.pdf. Retrieved 2007-05-20.
3. ↑ J. H. Anderson and M. Moir. "Universal constructions for multi-object operations". In Proc. 14th Annual ACM Symposium on Principles of Distributed Computing, pages 184–193, 1995. See their Table 1, Figures 1 & 2 and Section 2 in particular.
4. ↑ 4.0 4.1 Dice, Dave; Hendler, Danny; Mirsky, Ilya (2013). "Lightweight Contention Management for Efficient Compare-and-Swap Operations". arXiv:1305.5800 [cs.DC].
5. ↑ Goetz, Brian (23 November 2004). "Java theory and practice: Going atomic". https://www.ibm.com/developerworks/library/j-jtp11234/index.html.
6. ↑ Tudor David, Rachid Guerraoui, and Vasileios Trigonakis. "Everything you always wanted to know about synchronization but were afraid to ask." Proceedings of the Twenty-Fourth ACM Symposium on Operating Systems Principles. ACM, 2013, pp. 33-48. Detail on p. 34
7. ↑ David S. Miller. "Semantics and Behavior of Atomic and Bitmask Operations, for Linux port maintainers" .
8. ↑ "atomic_compare_exchange_weak, atomic_compare_exchange_strong, atomic_compare_exchange_weak_explicit, atomic_compare_exchange_strong_explicit". https://en.cppreference.com/w/c/atomic/atomic_compare_exchange.
9. ↑ "GNU C Extensions to the C Language Family: Built-in functions for atomic memory access"
10. ↑ Simon Doherty et al., "DCAS is not a silver bullet for nonblocking algorithm design". 16th annual ACM symposium on Parallelism in algorithms and architectures, 2004, pp. 216–224. doi:10.1145/1007912.1007945
11. ↑ Keir Fraser (2004), "Practical lock-freedom" UCAM-CL-TR-579.pdf
12. ↑ Dave Dice, Yossi Lev, Mark Moir, Dan Nussbaum, and Marek Olszewski. (2009) "Early experience with a commercial hardware transactional memory implementation." Sun Microsystems technical report (60 pp.) SMLI TR-2009-180. A short version appeared at ASPLOS’09 doi:10.1145/1508244.1508263. The full-length report discusses how to implement DCAS using HTM in section 5.
13. ↑ "Intel 64 and IA-32 Architectures Software Developer's Manual Volume 2A: Instruction Set Reference, A-M". http://www.intel.com/Assets/en_US/PDF/manual/253666.pdf. Retrieved 2007-12-15.
14. ↑ Chacos, Brad (October 29, 2013). "New Windows 8.1 requirements strand some users on Windows 8". PC World. https://www.pcworld.com/article/448350/new-windows-8-1-requirements-strand-some-users-on-windows-8.html.
15. ↑ "Intel Itanium Architecture Software Developer's Manual Volume 3: Instruction Set Reference". http://download.intel.com/design/Itanium/manuals/24531905.pdf. Retrieved 2007-12-15.
16. ↑ "A Practical Multi-Word Compare-and-Swap Operation". https://www.cl.cam.ac.uk/research/srg/netos/papers/2002-casn.pdf. Retrieved 2009-08-08.
17. ↑ Wang, William; Diestelhorst, Stephan (June 17, 2019). "Persistent Atomics for Implementing Durable Lock-Free Data Structures for Non-Volatile Memory (Brief Announcement)". The 31st ACM Symposium on Parallelism in Algorithms and Architectures. Association for Computing Machinery. pp. 309–311. doi:10.1145/3323165.3323166. ISBN 9781450361842. https://doi.org/10.1145/3323165.3323166.
18. ↑ Wei, Yuanhao; Ben-David, Naama; Blelloch, Guy; Fatourou, Panagiota; Ruppert, Eric; Sun, Yihan (2021). "Constant-time snapshots with applications to concurrent data structures". Proceedings of the 26th ACM SIGPLAN Symposium on Principles and Practice of Parallel Programming. Association for Computing Machinery. pp. 31-46. doi:10.1145/3437801.3441602. https://doi.org/10.1145/3437801.3441602.

## External links

* AIX compare_and_swap Kernel Service
* Java package `java.util.concurrent.atomic` implements 'compareAndSet' in various classes
* .NET Class methods Interlocked::CompareExchange

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Compare-and-swap. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Compare-and-swap&oldid=4155079"