Flat spot (reflection seismology)

Flat spot in 2D seismic line.

In reflection seismology, a flat spot is a seismic attribute anomaly that appears as a horizontal reflector cutting across the stratigraphy elsewhere present on the seismic image.[1] Its appearance can indicate the presence of hydrocarbons. Therefore, it is known as a direct hydrocarbon indicator and is used by geophysicists in hydrocarbon exploration.

## Contents

* 1 Theory
* 2 Caution
* 3 See also
* 4 References

## Theory

A flat spot can result from the increase in acoustic impedance when a gas-filled porous rock (with a lower acoustic impedance) overlies a liquid-filled porous rock (with a higher acoustic impedance). It may stand out on a seismic image because it is flat and will contrast with surrounding dipping reflections.[2]

## Caution

There are a number of other possible reasons for there being a flat spot on a seismic image. It could be representative of a mineralogical change in the subsurface or an unresolved shallower multiple. Additionally, the interpretation of a flat spot should be attempted after depth conversion to confirm that the anomaly is actually flat.[1]

## See also

* Bright spot
* Seismic attribute
* Reflection seismology

## References

1. ↑ 1.0 1.1 Gluyas, J.; Swarbrick, R. (2011). Petroleum Geoscience (2nd ed.). Blackwell Publishing. p. 242. ISBN 978-0-632-03767-4.
2. ↑ Sheriff, R. E.; Geldart, L. P. (1995). Exploration Seismology (2nd ed.). Cambridge University Press. p. 416. ISBN 0-521-46826-4.

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Flat spot (reflection seismology). Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Earth:Flat_spot_(reflection_seismology)&oldid=276397"