Design for manufacturability

Short description: Designing products to facilitate manufacturing

Redesigned for manufacturability

Design for manufacturability (DFM), also known as design for manufacturing, is the engineering practice of designing a product to reduce the cost of its manufacture and to make its manufacture easier, and often the two aspects are intertwined. Common factors that affect manufacturability include the type of raw material, the form of the raw material, dimensional tolerances, and secondary processing such as finishing.

## Contents

* 1 By manufacturing technology
* 1.1 Printed circuit board
* 1.2 Integrated circuit
* 1.2.1 Background
* 1.2.2 Key Concepts
* 1.2.3 Techniques
* 1.2.4 Design flow
* 1.2.5 Importance
* 1.3 Computer numerical control machining
* 1.3.1 Set-up time of operations (flip of the part)
* 1.3.2 Material type
* 1.3.3 Material form
* 1.3.4 Tolerances
* 1.3.5 Design and shape
* 2 Related
* 2.1 Design for inspection
* 2.2 Design for additive manufacturing
* 3 See also
* 4 References
* 5 Sources
* 6 External links

## By manufacturing technology

DFM applies broadly yet differs widely depending on the manufacturing technology.

### Printed circuit board

In the printed circuit board (PCB) design process, DFM leads to a set of design guidelines that attempt to ensure manufacturability. By doing so, probable production problems may be addressed during the design stage.

Ideally, DFM guidelines take into account the processes and capabilities of the manufacturing industry. Therefore, DFM is constantly evolving.

As manufacturing companies evolve and automate more and more stages of the processes, these processes tend to become cheaper. DFM is usually used to reduce these costs.[1] For example, if a process may be done automatically by machines (i.e. SMT component placement and soldering), such process is likely to be cheaper than doing so by hand.

### Integrated circuit

Semiconductor DFM is a set of principles and techniques used in integrated circuit (IC) design to ensure that those designs transition smoothly into high-volume manufacturing with optimal yield and reliability. DFM focuses on anticipating potential fabrication issues and proactively modifying chip layouts and circuits to mitigate their impact.

#### Background

As semiconductor technology scales to smaller nodes, transistors and interconnects become incredibly dense and sensitive to subtle variations in the manufacturing process. These variations can lead to defects that cause chips to malfunction or degrade their performance. DFM aims to minimize the impact of these variations, improving yield and making chip manufacturing more cost-effective.

#### Key Concepts

Design Rules
Foundries provide detailed design rules that specify minimum dimensions, spacing, and other geometrical constraints that must be adhered to for successful fabrication. DFM-aware design tools automatically check designs against these rules, flagging potential violations for correction.

Process Variability
DFM techniques account for inherent variability in manufacturing processes such as lithography, etching, and deposition. By simulating how variations might affect specific design structures, designers can modify layouts to minimize sensitivity to these variations.

Yield Optimization
DFM aims to maximize yield, the percentage of chips that function correctly out of a manufactured wafer. This involves identifying critical areas of the design, adding redundancy, and implementing layout strategies that improve the likelihood of successful fabrication.

Reliability
DFM encompasses techniques to ensure chips are reliable throughout their expected lifespan. This involves analyzing how design choices impact electromigration, hot carrier injection, and other potential failure mechanisms, and designing accordingly.

#### Techniques

Some common DFM techniques used in semiconductor design include:

Redundancy
Adding extra transistors or circuit elements to critical paths, so if one element fails, the chip can still function.

Fill Patterns
Adding non-functional geometrical shapes to empty areas of a layout to improve pattern density and minimize local manufacturing variations.

Optical proximity correction (OPC)
Modifying mask patterns to compensate for distortions that occur during the lithography process.

Restricted Design Rules (RDR)
A subset of design rules that are more conservative than standard rules, offering higher manufacturability.

Yield Simulations
Using statistical models to predict how design and process variations impact yield, allowing for informed design modification.

#### Design flow

DFM is integrated throughout the semiconductor design flow:

Design
Designers use DFM-aware tools that automatically check for rule violations and potential manufacturability issues.

Verification
Verification processes include extensive DFM checks to ensure the design meets all manufacturing requirements.

Physical implementation
During this stage, techniques like fill insertion and OPC are applied to the design for manufacturing optimization.

Signoff
A thorough design rule check (DRC) and layout vs. schematic (LVS) verification is performed to ensure the design is ready for fabrication.

#### Importance

DFM is essential for the successful and cost-effective production of advanced semiconductor devices.[2] By proactively addressing manufacturability issues during the design stage, DFM leads to:

* Higher yields
* Faster time-to-market
* Reduced risk of design re-spins
* Lower manufacturing costs

### Computer numerical control machining

For computer numerical control (CNC) machining, the objective is to design for lower cost. The cost is driven by time, so the design must minimize the time required to not just machine (remove the material), but also the set-up time of the CNC machine, NC programming, fixturing and many other activities that are dependent on the complexity and size of the part.

#### Set-up time of operations (flip of the part)

Unless a 4th and/or 5th axis is used, a CNC can only approach the part from a single direction. One side must be machined at a time (called an operation or op). Then the part must be flipped from side to side to machine all of the features. The geometry of the features dictates whether the part must be flipped over or not. The more ops (flip of the part), the more expensive the part because it incurs substantial set-up and load/unload time.

Each operation (flip of the part) has set-up time, machine time, time to load/unload tools, time to load/unload parts, and time to create the NC program for each operation. If a part has only 1 operation, then parts only have to be loaded/unloaded once. If it has 5 operations, then load/unload time is significant.

The low-hanging fruit is minimizing the number of operations (flip of the part) to create significant savings. For example, it may take only 2 minutes to machine the face of a small part, but it will take an hour to set the machine up to do it. Or, if there are 5 operations at 1.5 hours each, but only 30 minutes total machine time, then 7.5 hours is charged for just 30 minutes of machining.[3]

Lastly, the volume (number of parts to machine) plays a critical role in amortizing the set-up time, programming time and other activities into the cost of the part. In the example above, the part in quantities of 10 could cost 7–10 times the cost in quantities of 100.

Typically, the law of diminishing returns presents itself at volumes of 100–300 because set-up times, custom tooling and fixturing can be amortized into the noise.[4]

#### Material type

The most easily machined types of metals include aluminum, brass, and softer metals. As materials get harder, denser and stronger, such as steel, stainless steel, titanium, and exotic alloys, they become much harder to machine and take much longer, thus being less manufacturable. Most types of plastic are easy to machine, although additions of fiberglass or carbon fiber can reduce the machinability. Plastics that are particularly soft and gummy may have machinability problems of their own.

#### Material form

Metals come in all forms. In the case of aluminum as an example, bar stock and plate are the two most common forms from which machined parts are made. The size and shape of the component may determine which form of material must be used. It is common for engineering drawings to specify one form over the other. Bar stock is generally close to 1/2 of the cost of plate on a per pound basis. So although the material form isn't directly related to the geometry of the component, cost can be removed at the design stage by specifying the least expensive form of the material.

#### Tolerances

A significant contributing factor to the cost of a machined component is the tolerance to which the features must be made. The tighter the tolerance required, the more expensive the component will be to machine. When designing, specify the loosest tolerance that will serve the function of the component. Tolerances must be specified on a feature by feature basis. There are creative ways to engineer components with lower tolerances that still perform as well as ones with higher tolerances.

#### Design and shape

As machining is a subtractive process, the time to remove the material is a major factor in determining the machining cost. The volume and shape of the material to be removed as well as how fast the tools can be fed will determine the machining time. When using milling cutters, the strength and stiffness of the tool which is determined in part by the length to diameter ratio of the tool will play the largest role in determining that speed. The shorter the tool is relative to its diameter the faster it can be fed through the material. A ratio of 3:1 (L:D) or under is optimum.[5] If that ratio cannot be achieved, a solution like this depicted here can be used.[6] For holes, the length to diameter ratio of the tools are less critical, but should still be kept under 10:1.

There are many other types of features which are more or less expensive to machine. Generally chamfers cost less to machine than radii on outer horizontal edges. 3D interpolation is used to create radii on edges that are not on the same plane which incur 10X the cost.[7] Undercuts are more expensive to machine. Features that require smaller tools, regardless of L:D ratio, are more expensive.

## Related

### Design for inspection

The concept of design for inspection (DFI) should complement and work in collaboration with design for manufacturability (DFM) and design for assembly (DFA) to reduce product manufacturing cost and increase manufacturing practicality. There are instances when this method could cause calendar delays since it consumes many hours of additional work such as the case of the need to prepare for design review presentations and documents. To address this, it is proposed that instead of periodic inspections, organizations could adopt the framework of empowerment, particularly at the stage of product development, wherein the senior management empowers the project leader to evaluate manufacturing processes and outcomes against expectations on product performance, cost, quality and development time.[8] Experts, however, cite the necessity for the DFI because it is crucial in performance and quality control, determining key factors such as product reliability, safety, and life cycles.[9] For an aerospace components company, where inspection is mandatory, there is the requirement for the suitability of the manufacturing process for inspection. Here, a mechanism is adopted such as an inspectability index, which evaluates design proposals.[10] Another example of DFI is the concept of cumulative count of conforming chart (CCC chart), which is applied in inspection and maintenance planning for systems where different types of inspection and maintenance are available.[11]

### Design for additive manufacturing

Additive manufacturing broadens the ability of a designer to optimize the design of a product or part (to save materials for example). Designs tailored for additive manufacturing are sometimes very different from designs tailored for machining or forming manufacturing operations.

In addition, due to some size constraints of additive manufacturing machines, sometimes the related bigger designs are split into smaller sections with self-assembly features or fasteners locators.

A common characteristic of additive manufacturing methods, such as fused deposition modeling, is the need for temporary support structures for overhanging part features. Post-processing removal of these temporary support structures increases the overall cost of fabrication. Parts can be designed for additive manufacturing by eliminating or reducing the need for temporary support structures. This can be done by limiting the angle of overhanging structures to less than the limit of the given additive manufacturing machine, material, and process (for example, less than 70 degrees from vertical).

## See also

* Design for Six Sigma
* Design for X
* Electronic design automation
* Reliability engineering
* Six Sigma
* Statistical process control
* DFMA
* Rule-based DFM analysis for direct metal laser sintering
* Rule-based analysis of extrusion process
* Rule-based DFM analysis for metal spinning
* Rule-based DFM analysis for deep drawing
* Rule-based DFM analysis for forging
* DFM analysis for stereolithography
* Rule-based DFM analysis for electric discharge machining

## References

1. ↑ Dolcemascolo, Darren. "DFM helps manufacturers reduce cost while maintaining value". https://www.reliableplant.com/Read/11600/dfm-reduce-cost.
2. ↑ Owusu-Boahen, Kwame; Han, Carl; Hsueh, Ching; Kim, Chulwoo; Vijayakumar, Arun; Devender, Fnu; Moreau, David (2021). "E-Beam detection of over-etch in semiconductor processing and how over-etch level is related to defect detection parameters". Metrology, Inspection, and Process Control for Semiconductor Manufacturing XXXV. p. 18. doi:10.1117/12.2584652. ISBN 978-1-5106-4055-9.
3. ↑ "How to Design Cheap Machined Parts and Why? - Parametric Manufacturing". 3 September 2016. http://parametric-usa.com/how-to-design-low-price-machined-parts-and-why/.
4. ↑ "Guide to CNC Machining Prototype & Production - Parametric Manufacturing". August 2016. http://parametric-usa.com/quick-guide-cnc-machining-prototype-production/.
5. ↑ "Milling: Design Rules". http://www.efunda.com/processes/machining/mill_design.cfm.
6. ↑ "Design Guide". Pro CNC. http://procnc.com/images/content/Design_Guide_Rev_C.pdf.
7. ↑ "The #1 Killer to a Low Price CNC Machined Part - Parametric Manufacturing - CNC Machine Shop + Wire EDM". 17 July 2016. http://parametric-usa.com/1-killer-low-price-cnc-machined-part/.
8. ↑ Anderson, David (2004). Design for Manufacturability & Concurrent Engineering: How to Design for Low Cost, Design in High Quality, Design for Lean Manufacture, and Design Quickly for Fast Production. Cambria, CA: CIM Press. pp. 28. ISBN 978-1878072238.
9. ↑ Gupta, Praveen (2006). Six Sigma Business Scorecard, Chapter 3 - Need for the Six Sigma Business Scorecard. New York: McGraw Hill Professional. pp. 4. ISBN 9780071735117.
10. ↑ Stolt, Roland; Elgh, Fredrik; Andersson, Petter (2017). "Design for Inspection - Evaluating the Inspectability of Aerospace Components in the Early Stages of Design". Procedia Manufacturing 11: 1193–1199. doi:10.1016/j.promfg.2017.07.244.
11. ↑ Chan, Ling-Yau; Wu, Shaomin (October 2009). "Optimal design for inspection and maintenance policy based on the CCC chart". Computers & Industrial Engineering 57 (3): 667–676. doi:10.1016/j.cie.2008.12.009.

## Sources

* Mentor Graphics - DFM: What is it and what will it do? (must fill request form).
* Mentor Graphics - DFM: Magic Bullet or Marketing Hype (must fill request form).
* Electronic Design Automation For Integrated Circuits Handbook, by Lavagno, Martin, and Scheffer, ISBN 0-8493-3096-3 A survey of the field of EDA. The above summary was derived, with permission, from Volume II, Chapter 19, Design for Manufacturability in the Nanometer Era, by Nicola Dragone, Carlo Guardiani, and Andrzej J. Strojwas.
* Design for Manufacturability And Statistical Design: A Constructive Approach, by Michael Orshansky, Sani Nassif, Duane Boning ISBN 0-387-30928-4
* Estimating Space ASICs Using SEER-IC/H, by Robert Cisneros, Tecolote Research, Inc. (2008) Complete Presentation

## External links

| Wikibooks has a book on the topic of: Practical Electronics/PCB Layout

|

* Why DFM/DFMA is Business Critical
* Design for manufacturing checklist – DFM,DFA(Design for assembly checklist from Quick-teck PCB manufacturer
* Arc Design for Manufacturability Tips
* Design for Manufacturing and Assembly
* Turning designs into reality: The Manufacturability paradigm

* v
* t
* e

Design

* Outline
* Designer

Disciplines

| Communication
design|

* Advertising
* Book design
* Corporate design
* Exhibit design
* Film title design
* Graphic design
* Motion
* Postage stamp design
* Print design
* Illustration
* Information design
* Instructional design
* News design
* Photography
* Retail design
* Signage / Traffic sign design
* Typography / Type design
* Video design
* Visual merchandising

|

Environmental
design|

* Architecture
* Architectural lighting design
* Building design
* Passive solar
* Ecological design
* Environmental impact design
* Garden design
* Computer-aided
* Healthy community design
* Hotel design
* Interior architecture
* Interior design
* EID
* Keyline design
* Landscape architecture
* Sustainable
* Landscape design
* Spatial design
* Urban design

Industrial
design|

* Automotive design
* Automotive suspension design
* CMF design
* Corrugated box design
* Electric guitar design
* Furniture design
* Sustainable
* Hardware interface design
* Motorcycle design
* Packaging and labeling
* Photographic lens design
* Product design
* Production design
* Sensory design
* Service design

Interaction
design|

* Experience design
* EED
* Game design
* Level design
* Video game design
* Hardware interface design
* Icon design
* Immersive design
* Information design
* Sonic interaction design
* User experience design
* User interface design
* Web design

Other
applied arts|

* Public art design
* Ceramic / glass design
* Fashion design
* Costume design
* Jewelry design
* Floral design
* Game art design
* Property design
* Scenic design
* Sound design
* Stage/set lighting design
* Textile design

Other
design
& engineering|

* Algorithm design
* Behavioural design
* Boiler design
* Database design
* Drug design
* Electrical system design
* Experimental design
* Filter design
* Geometric design
* Job design
* Integrated circuit design
* Circuit design
* Physical design
* Power network design
* Mechanism design
* Nuclear weapon design
* Nucleic acid design
* Organization design
* Process design
* Processor design
* Protein design
* Research design
* Social design
* Software design
* Spacecraft design
* Strategic design
* Systems design

Approaches

* Activity-centered
* Adaptive web
* Affective
* Brainstorming
* By committee
* By contract
* C-K theory
* Closure
* Co-design
* Concept-oriented
* Configuration
* Contextual
* Continuous
* Cradle-to-cradle
* Creative problem-solving
* Creativity techniques
* Critical
* Design fiction
* Defensive
* Design–bid–build
* Design–build
* architect-led
* Domain-driven
* Ecodesign
* Energy neutral
* Engineering design process
* Probabilistic design
* Error-tolerant
* Fault-tolerant
* Framework-oriented
* For assembly
* For behaviour change
* For manufacturability
* For Six Sigma
* For testing
* For X
* Functional
* Generative
* Geodesign
* HCD
* High-level
* Inclusive
* Integrated
* Integrated topside
* Intelligence-based
* Iterative
* KISS principle
* Low-level
* Metadesign
* Mind mapping
* Modular
* New Wave
* Object-oriented
* Open
* Parametric
* Participatory
* Platform-based
* Policy-based
* Process-centered
* Public interest
* Rational
* Regenerative
* Reliability engineering
* Research-based
* Responsibility-driven
* RWD
* Safe-life
* Sustainable
* Systemic
* SOD
* Tableless web
* Theory of constraints
* Top-down and bottom-up
* Transformation
* Transgenerational
* TRIZ
* Universal
* Design for All
* Usage-centered
* Use-centered
* User-centered
* Empathic
* User innovation
* Value-driven
* Value sensitive
* Privacy by

* Design choice
* computing
* controls
* flow
* leadership
* management
* marker
* methods
* pattern
* research
* science
* sprint
* strategy
* theory
* thinking

* Tools
* Intellectual property
* Organizations
* Awards

| Tools|

* AAD
* Architectural model
* Blueprint
* Comprehensive layout
* CAD
* CAID
* Virtual home design software
* CAutoD
* Design quality indicator
* Electronic design automation
* Flowchart
* Mockup
* Product design specification
* Prototype
* Sketch
* Storyboard
* Technical drawing
* Web design program
* Website wireframe

|

Intellectual
property|

* Community design
* Design around
* Design patent
* Fashion design copyright
* Geschmacksmuster
* Industrial design rights
* European Union

Organizations|

* AIGA
* Chartered Society of Designers
* Design and Industries Association
* Design Council
* International Forum Design
* The Design Society
* Design Research Society

Awards|

* European Design Award
* German Design Award
* Good Design Award (Museum of Modern Art)
* Good Design Award (Chicago Athenaeum)
* Good Design Award (Japan)
* Graphex
* IF product design award
* James Dyson Award
* Prince Philip Designers Prize
* Prix Versailles

Related topics

* Aesthetics
* Agile
* Concept art
* Conceptual design
* Creative industries
* Cultural icon
* .design
* Enterprise architecture
* Futures studies
* Indie design
* Innovation Management
* Intelligent design
* Lean Startup
* New product development
* OODA Loop
* Philosophy of design
* Process simulation
* Slow design
* STEAM fields
* Unintelligent design
* Visualization
* Wicked problem

* Design brief
* change
* classic
* competition
* architectural
* student
* director
* education
* elements and principles
* engineer
* firm
* history
* knowledge
* language
* life
* load
* museum
* paradigm
* rationale
* review
* specification
* studio
* technology

* Commons
* Wikibooks
* Wikinews
* Wikiquote
* Wikisource
* Wiktionary

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Design for manufacturability. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Design_for_manufacturability&oldid=3898743"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template