Hold down (structural engineering)

A hold down resisting uplift from a timber shear wall

Holdown (holdown, hold-down, or hold down) or tie-down in structural engineering refers to the steel device or hardware that is installed at the end of a plywood shear wall. The hold downs provide uplift resistance against the overturning moment imposed on the wall due to "in-plane" lateral load applied at the top of the wall. A hold-down may also refer to clamping device used to anchor a pipe to a structural steel element or concrete floor or allow movement of the pipe in an axial direction.[1]

At the bottom, the hold down is connected to the concrete foundation or structural slab by an embedded or epoxied anchor bolt. At the top, the hold down is connected to a wood post with screws, nails or bolts.

Hold-down clamp for anchoring pipes

## References

1. ↑ Hold-Down Pipe Clamps. Piping Technology and Products, (retrieved May 2012).

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Hold down (structural engineering). Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Hold_down_(structural_engineering)&oldid=2532332"