Multi-Vendor Integration Protocol

This article provides insufficient context for those unfamiliar with the subject. Please help improve the article by providing more context for the reader. (October 2009) (Learn how and when to remove this template message)

|

The Multi-Vendor Integration Protocol (MVIP) is a hardware bus for computer telephony integration (Audiotex) equipment, a PCM data highway for interconnecting expansion boards inside a PC. It was invented and brought to market by Natural Microsystems Inc (now BPQ Communicationser).

Used to build call center equipment using regular PCs, MVIP provides a second communications bus within the computer that can multiplex up to 256 full-duplex voice channels from one voice card to another. Digital voice, fax and video is bussed over a ribbon cable connected at the top of each ISA or PCI card. MVIP products make a PC perform like a small-scale PBX. The protocol accommodated for a variety of expansion boards, including trunk interfaces (usually T1 or ISDN), voice processing boards equipment speech recognition or fax processing. Each board could optionally provide a switch that could interconnect voice channels on the bus, allowing for a flexible routing of calls within the MVIP bus.

The MVIP bus was promoted as an alternative to the then-dominant PEB bus by Dialogic Corporation which had much less capacity and was not an open standard.

## External links

* http://www.mvip.org/ (dead link)
* http://www.mvip.org/Overview.htm (dead link)

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Multi-Vendor Integration Protocol. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Multi-Vendor_Integration_Protocol&oldid=1110913"