Wheel arrangement

Short description: Classification system for rolling stocks

Locomotives of different types (Whyte and UIC wheel notation)

In rail transport, a wheel arrangement or wheel configuration is a system of classifying the way in which wheels are distributed under a locomotive.[1] Several notations exist to describe the wheel assemblies of a locomotive by type, position, and connections, with the adopted notations varying by country. Within a given country, different notations may also be employed for different kinds of locomotives, such as steam, electric, and diesel powered.

Especially in steam days, wheel arrangement was an important attribute of a locomotive because there were many different types of layout adopted, each wheel being optimised for a different use (often with only some being actually "driven"). Modern diesel and electric locomotives are much more uniform, usually with all axles driven.

## Contents

* 1 Major notation schemes
* 2 Comparison of wheel arrangements and wheel picture
* 3 Geared steam locomotives
* 4 See also
* 5 References

## Major notation schemes

The examples and perspective in this article may not represent a worldwide view of the subject. You may improve this article, discuss the issue on the talk page, or create a new article, as appropriate. (July 2024) (Learn how and when to remove this template message)

|

The main notations are the Whyte notation (based on counting the wheels), the AAR wheel arrangement notation (based on counting either the axles or the bogies), and the UIC classification of locomotive axle arrangements (based on counting either the axles or the bogies).

The Whyte notation is generally used for steam locomotives throughout the United States, Canada, the United Kingdom and Ireland. For diesels and electrics, North America uses the AAR wheel arrangement scheme while British practice uses a slightly simplified form of the European UIC classification scheme (except for small diesel shunters, where Whyte notation is used).

In mainland Europe, the UIC classification scheme is generally used for all locomotive types including steam, with some exceptions. In France, the UIC classification is used for diesels and electrics while a scheme similar to the Whyte notation, but counting axles instead of wheels, is used for steam locomotives. Notably, Switzerland had its own separate notation system until 1989, with the Swiss locomotive and railcar classification now only retained for its narrow-gauge railways.

* AAR wheel arrangement - Used largely throughout the US and Canada for diesel and electric locomotives.
* UIC classification - Used in mainland Europe for all locomotive types. Used in the UK for electric and large diesel locomotives.
* Whyte notation \- Used in North America, the UK and Ireland for steam locomotives, and for shunter locomotives (US: switcher locomotives) in the UK.

## Comparison of wheel arrangements and wheel picture

This American name column possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (August 2024) (Learn how and when to remove this template message)

|

VDEV/VMEV/UIC-system  | Whyte-notation  | American name  | Picture scheme
Locomotive front is to the left

|
|
|

A1  | 0-2-2  | Northumbrian  | 30px
A2  | 0-2-4  |  |
1A  | 2-2-0  | Planet  | 35px
1A1  | 2-2-2  | Single, Jenny Lind, Patentee  | 40px
1A2  | 2-2-4  | Aerolite  | 45px
2′A  | 4-2-0  | Jervis  | 35px
2′A1  | 4-2-2  |  | 40px
2A2  | 4-2-4  | Huntington  | 50px
3A  | 6-2-0  | Crampton  | 40px
N/A  | 0-3-0  |  | 35px
B  | 0-4-0  | Four-Wheel-Switcher  | 30px
B1  | 0-4-2  | Olomana  | 35px
B2′ | 0-4-4  | Forney four-coupled  | 40px
B3′ | 0-4-6  |  |
1B  | 2-4-0  | Porter  | 40px
1′B1′ | 2-4-2  | Columbia  | 40px
1B2′ | 2-4-4  | Forney, Mason Bogie  | 45px
1B3′ | 2-4-6  |  |
2′B  | 4-4-0  | American, Eight-Wheeler  | 45px
2′B1′ | 4-4-2  | Atlantic  | 50px
2′B2′ | 4-4-4  | Jubilee (CA), Reading (US)  | 55px
2′B3′ | 4-4-6  |  |
C  | 0-6-0  | Six-Wheel-Switcher  | 40px
C1  | 0-6-2  | Webb, Branchline  | 45px
C2′ | 0-6-4  |  | 50px
1′C  | 2-6-0  | Mogul  | 45px
1′C1′ | 2-6-2  | Prairie  | 50px
1′C2′ | 2-6-4  | Adriatic, Lionel  | 55px
1′C3′ | 2-6-6  |  | 60px
2′C  | 4-6-0  | Ten-Wheeler  | 50px
2′C1′ | 4-6-2  | Pacific  | 55px
2′C2′ | 4-6-4  | Hudson (NYC), Baltic (MR), Shore Line (NH)  | 60px
D  | 0-8-0  | Eight-Wheel-Switcher  | 45px
D1  | 0-8-2  | Transfer  | 50px
D2′ | 0-8-4  |  | 55px
D3′ | 0-8-6  |  |
1′D  | 2-8-0  | Consolidation  | 50px
1′D1′ | 2-8-2  | Mikado, MacArthur (USATC)  | 55px
1′D2′ | 2-8-4  | Berkshire, Kanawha (C&O), Lima (B&M)&(IC)  | 60px
1′D3′ | 2-8-6  |  | 65px
2′D  | 4-8-0  | Twelve-Wheeler, Mastodon  | 55px
2′D1′ | 4-8-2  | Mountain, Mohawk (NYC), New Haven (NH)  | 60px
2′D2′ | 4-8-4  | Northern, General Service (SP), Golden State (SP), Niagara (NYC), Wyoming (LV), Potomac (WM), Confederation (CN), Dixie (NC&St.L), Greenbrier (C&O), Laurentian (D&H), Montana (GN), Pocono (Lackawanna),  | 65px
2D3  | 4-8-6  |  | 70px
3′D3′ | 6-8-6  | Turbine (Pennsylvania Railroad Steam Turbine)  | 75px
E  | 0-10-0  | Ten-Wheel Switcher  | 60px
E1′ | 0-10-2  | Union  | 65px
1′E  | 2-10-0  | Decapod  | 65px
2′E  | 4-10-0  | Mastodon, El Gobernador,  | 70px
1′E1′ | 2-10-2  | Santa Fe, Decapod (SP), Central (IC)  | 70px
1′E2′ | 2-10-4  | Texas, Selkirk (CP), Colorado (CB&Q)  | 75px
2′E1′ | 4-10-2  | Southern Pacific, Overland (UP)  | 75px
F  | 0-12-0  | Pennsylvania, Twelve-Wheel-Switcher  | 70px
1′F  | 2-12-0  | Centipede  | 75px
1′F1′ | 2-12-2  | Javanic  | 80px
2′F1′ | 4-12-2  | Union Pacific  | 85px
2′G2′ | 4-14-4  | Soviet (AA)  | 95px
A′A  | 0-2-2-0  |  |
B′B  | 0-4-4-0  | nameless (Mallet)  |
B′B1  | 0-4-4-2  | nameless (Mallet)  |
2′BB2′ | 4-4-4-4  | nameless (Pennsylvania Railroad Duplex)  | 80px
3′BB3′ | 6-4-4-6  |  | 90px
2′CB2′ | 4-6-4-4  | nameless (Pennsylvania Railroad Duplex)  | 85px
C′C  | 0-6-6-0  | Old Maude (Mallet)  | 90px
(1′C)C  | 2-6-6-0  | nameless (Mallet)  | 90px
(1′C)C1′ | 2-6-6-2  | nameless (Mallet)  | 90px
(1′C)C2′ | 2-6-6-4  | nameless (Simple articulated)  | 90px
(2′C)C2′ | 4-6-6-4  | Challenger (Simple articulated)  | 90px
(1′C)C3′ | 2-6-6-6  | Allegheny, Blue Ridge (Simple articulated)  | 90px
D′D  | 0-8-8-0  | Angus (Mallet)  | 90px
(1′D)D  | 2-8-8-0  | Bull Moose (Mallet)  | 90px
(1′D)D1′ | 2-8-8-2  | Chesapeake (C&O), Cab Forward (SP) (Mallet)  | 90px
(1′D)D2′ | 2-8-8-4  | Yellowstone (Simple articulated)  | 90px
(2′D)D1′ | 4-8-8-2  | Cab Forward (Simple articulated)  | 90px
(2′D)D2′ | 4-8-8-4  | Big Boy (Simple articulated)  | 90px
(1′E)E1′ | 2-10-10-2  | Virginian (Mallet)  | 90px
(1′D1′)(1′D1′)  | 2-8-2+2-8-2  | Nameless, Garratt | 100px
(2′C1′)(1′C2′)  | 4-6-2+2-6-4  | nameless (Garratt)  | 100px
(2′C2′)(2′C2′)  | 4-6-4+4-6-4  | nameless (Garratt)  | 100px
(2′D)(D2′)  | 4-8-0+0-8-4  | nameless (Garratt)  |
(2′D1′)(1′D2′)  | 4-8-2+2-8-4  | Double Mountain (Garratt)  | 100px
(2′D2′)(2′D2′)  | 4-8-4+4-8-4  | nameless (Garratt)  | 100px

## Geared steam locomotives

Geared steam locomotives such as Shays, Heislers, and Climaxes do not have a standard wheel arrangement classification system. Instead of being classified by wheel arrangement, they are instead classified by their design and their number of trucks.

No. of trucks  | American name  | Picture scheme

|
|

2-truck  | Class A Shay, Class B Shay, Class A Climax, Class B Climax, Heisler  | oo oo
3-truck  | Class C Shay, Class C Climax, Heisler  | oo oo oo
4-truck  | Class D Shay  | oo oo oo oo

## See also

| Wikidata has the property:

* NO LABEL (P2978) (see uses)

|

* Bo-Bo
* Bo-Bo-Bo
* Co-Co locomotives

## References

1. ↑ "Wheel Arrangements". Railway Technical Web Pages. 1 August 2011. http://www.railway-technical.com/whlarr.shtml.

Template:Locostyles

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Wheel arrangement. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Engineering:Wheel_arrangement&oldid=4122620"