Hazard substitution

For broader coverage of this topic, see Hierarchy of hazard controls.

Short description: Replacing a material or process with a lower risk alternative

Occupational hazards

* Physical
* Chemical
* Biological
* Psychosocial

Hierarchy of hazard controls

* Elimination
* Substitution
* Engineering controls
* Administrative controls
* Personal protective equipment
* Prevention through design

Occupational hygiene

* Occupational exposure limit
* Exposure assessment
* Workplace health surveillance
* Occupational epidemiology
* Occupational toxicology

* v
* t
* e

Hazard substitution is a hazard control strategy in which a material or process is replaced with another that is less hazardous. Substitution is the second most effective of the five members of the hierarchy of hazard controls in protecting workers, after elimination.[1][2][3] Substitution and elimination are most effective early in the design process, when they may be inexpensive and simple to implement, while for an existing process they may require major changes in equipment and procedures.[1] The concept of prevention through design emphasizes integrating the more effective control methods such as elimination and substitution early in the design phase.[4]

Hazard substitutions can involve not only changing one chemical for another, but also using the same chemical in a less hazardous form. Substitutions can also be made to processes and equipment. In making a substitution, the hazards of the new material should be considered and monitored, so that a new hazard is not unwittingly introduced,[3] causing "regrettable substitutions".[5] Substitution can also fail as a strategy if the hazardous process or material is reintroduced at a later stage in the design or production phases,[6] or if cost or quality concerns cause a substitution to not be adopted.[7]

## Contents

* 1 Examples
* 1.1 Chemicals
* 1.2 Processes and equipment
* 2 Regrettable substitutions
* 3 References

## Examples

### Chemicals

A common substitution is to replace a toxic chemical with a less toxic one.[8] Some examples include replacing the solvent benzene, a carcinogen, with toluene; switching from organic solvents to water-based detergents; and replacing paints containing lead with those containing non-leaded pigments.[3] Dry cleaning can avoid the use of toxic perchloroethylene by using petroleum-based solvents, supercritical carbon dioxide, or wet cleaning techniques.[9] Chemical substitutions are an example of green chemistry.[5]

Chemicals can also be substituted with a different form of the same chemical. In general, inhalation exposure to dusty powders can be reduced by using a slurry or suspension of particles in a liquid solvent instead of a dry powder,[10] or substituting larger particles such as pellets or ingots.[3] Some chemicals, such as nanomaterials, often cannot be eliminated or substituted with conventional materials because their unique properties are necessary to the desired product or process.[10] However, it may be possible to choose properties of the nanoparticle such as size, shape, functionalization, surface charge, solubility, agglomeration, and aggregation state to improve their toxicological properties while retaining the desired functionality.[11]

In 2014, the U.S. National Academies released a recommended decision-making framework for chemical substitutions. The framework maintained health-related metrics used by previous frameworks, including carcinogenicity, mutagenicity, reproductive and developmental toxicity, endocrine disruption, acute and chronic toxicity, dermal and eye irritation, and dermal and respiratory sensitization, and ecotoxicity. It added an emphasis on assessing actual exposure rather than only the inherent hazards of the chemical itself, decision rules for resolving trade-offs among hazards, and consideration of novel data sources on hazards such as simulations. The assessment framework has 13 steps, many of which are unique, such as dedicated steps for scoping and problem formulation, assessing physicochemical properties, broader life-cycle assessment, and research and innovation. The framework also provides guidance on tools and sources for scientific information.[12]

### Processes and equipment

An aerosol droplet containing nanomaterials ejected from a vial during sonication. Eliminating or limiting sonication and other handling processes reduces inhalation hazards.

Hazards to workers can be reduced by limiting or replacing procedures that may aerosolize toxic materials contained in the item. Examples include limiting agitation procedures such as sonication, or by using a lower-temperature process in chemical reactors to minimize release of materials in exhaust.[13] Substituting a water-jet cutting process instead of mechanical sawing of a solid item also creates less dust.[14]

Equipment can also be substituted, for example using a self-retracting lifeline instead of a fixed rope for fall protection,[15] or packaging materials in smaller containers to prevent lifting injuries.[16] Health effects from noise can be controlled by purchasing or renting less noisy equipment. This topic has been the subject of several Buy Quiet campaigns, and the NIOSH Power Tools Database contains data on sound power, pressure, and vibration levels of many power tools.[17][18]

## Regrettable substitutions

The synthesis of N-vinyl formamide requires use of the highly toxic hydrogen cyanide (H-CN). Even though the end product is a less-toxic alternative to acrylamide for end users, the hazards to workers manufacturing the material should also be considered in an alternatives assessment.

A regrettable substitution occurs when a material or process believed to be less hazardous turns out to have an unexpected hazard. One well-known example occurred when dichloromethane was phased out as a brake cleaner due to its environmental effects, but its replacement n-hexane was subsequently found to be neurotoxic.[5][12] Often the substances being replaced have well-studied hazards, but the alternatives may have little or no toxicity data, making alternatives assessments difficult.[5] Often, chemicals with no toxicity data are considered preferable since they do not prompt such concerns as a California Proposition 65 warning.[19]

Another type of regrettable substitution involves shifting the burden of a hazard to another party. One example is that the potent neurotoxin acrylamide can be replaced with the safer N-vinyl formamide, but the synthesis of the latter requires use of the highly toxic hydrogen cyanide, increasing the hazards to workers in the manufacturing firm. In performing an alternatives assessment, including the effects over the entire product lifecycle as part of a life-cycle assessment can mitigate this.[12]

## References

1. ↑ 1.0 1.1 "Hierarchy of Controls" (in en-us). 2016-07-18. https://www.cdc.gov/niosh/topics/hierarchy/.
2. ↑ "Hierarchy of Hazard Controls". http://nycosh.org/index.php?page=Hierarchy-of-Hazard-Controls.
3. ↑ 3.0 3.1 3.2 3.3 "Hazard Control". 2006-04-20. http://www.ccohs.ca/oshanswers/hsprograms/hazard_control.html.
4. ↑ "Prevention through Design" (in en-us). 2016-07-29. https://www.cdc.gov/niosh/topics/ptd/.
5. ↑ 5.0 5.1 5.2 5.3 Hogue, Cheryl. "Assessing Alternatives To Toxic Chemicals". http://cen.acs.org/articles/91/i50/Assessing-Alternatives-Toxic-Chemicals.html.
6. ↑ Nix, Doug (2011-02-28). "Understanding the Hierarchy of Controls". http://machinerysafety101.com/2011/02/28/understanding-the-hierarchy-of-controls/.
7. ↑ Braun, John. "The Hierarchy of Controls, Part One: Elimination and Substitution". http://simplifiedsafety.com/blog/the-hierarchy-of-controls-part-one-elimination-and-substitution/.
8. ↑ "Substitution of Chemicals: Considerations for Selection" (in en). http://www.ccohs.ca/oshanswers/chemicals/substitution.html.
9. ↑ (in en-us) Control of Exposure to Perchloroethylene in Commercial Drycleaning (Substitution). 1997. doi:10.26616/NIOSHPUB97155. https://www.cdc.gov/niosh/docs/hazardcontrol/hc17.html. Retrieved 2017-03-27.
10. ↑ 10.0 10.1 (in en-us) Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes. November 2013. pp. 9–20, 28. doi:10.26616/NIOSHPUB2014102. https://www.cdc.gov/niosh/docs/2014-102/default.html. Retrieved 2017-03-05.
11. ↑ (in en-us) Building a Safety Program to Protect the Nanotechnology Workforce: A Guide for Small to Medium-Sized Enterprises. March 2016. pp. 6–14. doi:10.26616/NIOSHPUB2016102. https://www.cdc.gov/niosh/docs/2016-102/. Retrieved 2017-03-05.
12. ↑ 12.0 12.1 12.2 Committee on the Design Evaluation of Safer Chemical Substitutions: A Framework to Inform Government Industry Decision; Board on Chemical Sciences Technology; Board on Environmental Studies Toxicology; Division on Earth Life Studies; National Research Council (2014-10-10) (in en). A Framework to Guide Selection of Chemical Alternatives. U.S. National Research Council. pp. 1-4, 10, 140. doi:10.17226/18872. ISBN 9780309310130. https://www.nap.edu/catalog/18872/a-framework-to-guide-selection-of-chemical-alternatives.
13. ↑ (in en-us) General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories. May 2012. pp. 10–28. doi:10.26616/NIOSHPUB2012147. https://www.cdc.gov/niosh/docs/2012-147/. Retrieved 2017-03-05.
14. ↑ Nix, Doug (2011-02-28). "Understanding the Hierarchy of Controls". http://machinerysafety101.com/2011/02/28/understanding-the-hierarchy-of-controls/.
15. ↑ Mlynek, Joe. "Hierarchy of Controls Prioritizes Action on Workplace Hazards" (in en-US). Progressive Safety Services. http://progressivesafety.us/uncategorized/hierarchy-of-controls-prioritizes-action-on-workplace-hazards/.
16. ↑ "Hierarchy of Controls". http://www.saunions.org.au/ohs/hierachy_of_controls.htm.
17. ↑ "Engineering Noise Control" (in en-us). 2016-12-02. https://www.cdc.gov/niosh/topics/noisecontrol.
18. ↑ "Buy Quiet" (in en-us). 2016-12-13. https://www.cdc.gov/niosh/topics/buyquiet.
19. ↑ Maertens, Alexandra; Golden, Emily; Hartung, Thomas (2021). "Avoiding Regrettable Substitutions: Green Toxicology for Sustainable Chemistry". ACS Sustainable Chemistry & Engineering 9 (23): 7749–7758. doi:10.1021/acssuschemeng.0c09435. PMID 36051558.

* v
* t
* e

Occupational safety and health

Occupational diseases
and injuries|

* Acrodynia
* Asbestosis
* Asthma
* Barotrauma
* Berylliosis
* Brucellosis
* Byssinosis ("brown lung")
* Chalicosis
* Chimney sweeps' carcinoma
* Chronic solvent-induced encephalopathy (CSE)
* Coalworker's pneumoconiosis ("black lung")
* Concussions in sport
* Decompression sickness
* De Quervain syndrome
* Exposure to human nail dust
* Farmer's lung
* Fiddler's neck
* Flock worker's lung
* Glassblower's cataract
* Golfer's elbow
* Hearing Loss
* Hospital-acquired infection
* Indium lung
* Laboratory animal allergy
* Lead poisoning
* Mad hatter disease
* Mesothelioma
* Metal fume fever
* Mule spinners' cancer
* Noise-induced hearing loss
* Phossy jaw
* Pneumoconiosis
* Radium jaw
* Repetitive strain injury
* Silicosis
* Silo-filler's disease
* Sports injury
* Surfer's ear
* Tennis elbow
* Tinnitus
* Writer's cramp

Occupational hygiene|

* Occupational hazard
* Biological hazard
* Chemical hazard
* Physical hazard
* Psychosocial hazard
* Hierarchy of hazard controls
* Prevention through design
* Exposure assessment
* Occupational exposure limit
* Occupational epidemiology
* Workplace health surveillance

Professions|

* Environmental health
* Industrial engineering
* Occupational health nursing
* Occupational health psychology
* Occupational medicine
* Occupational therapist
* Safety engineering

Agencies and organizations|

* Canadian Centre for Occupational Health and Safety
* European Agency for Safety and Health at Work
* UK Health and Safety Executive
* International Labour Organization
* U.S. National Institute for Occupational Safety and Health
* U.S. Occupational Safety and Health Administration
* World Health Organization

Standards|

* Bangladesh Accord
* ISO 45001
* Occupational Safety and Health Convention, 1981
* Worker Protection Standard (US)
* Working Environment Convention, 1977

Safety|

* Checklist
* Code of practice
* Contingency plan
* Diving safety
* Emergency procedure
* Emergency evacuation
* Hazard
* Hierarchy of hazard controls
* Hazard elimination
* Administrative controls
* Engineering controls
* Hazard substitution
* Personal protective equipment
* Job safety analysis
* Lockout-tagout
* Permit To Work
* Operations manual
* Redundancy (engineering)
* Risk assessment
* Safety culture
* Standard operating procedure

Legislation|

* Diving regulations

See also|

* Environment, health and safety
* Environmental toxicology
* Ergonomics
* Health physics
* Indoor air quality
* International Chemical Safety Card
* National Day of Mourning (Canadian observance)
* Process safety management
* Public health
* Risk management
* Safety data sheet (SDS)
* Toxic tort
* Workers' compensation

* Category
* Occupational diseases
* Journals
* Organizations
* Commons
* Glossary

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Hazard substitution. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Hazard_substitution&oldid=4346249"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template