Amplitude distortion

This page needs additional or more specific categories. Please help out by adding categories to it so that it can be listed with similar articles. (June 2025)

|

This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. Please help to improve this article by introducing more precise citations. (March 2013) (Learn how and when to remove this template message)

|

Amplitude distortion is distortion occurring in a system, subsystem, or device when the output amplitude is not a linear function of the input amplitude under specified conditions.

Generally, output is a linear function of input only for a fixed portion of the transfer characteristics. In this region, Ic=βIb where Ic is collector current and Ib is base current, following linear relation y=mx.

## Contents

* 1 Forms
* 2 Measurement
* 3 See also
* 4 External links

## Forms

When output is not in this portion, two forms of amplitude distortion might arise:

1. Harmonic distortion: The creation of harmonics of the fundamental frequency of a sine wave input to a system.
2. Intermodulation distortion: This form of distortion occurs when two sine waves of frequencies X and Y are present at the input, resulting in the creation of several other frequency components, whose frequencies include (X+Y), (X-Y), (2X-Y), (2Y-X), and generally (mX ± nY) for integer m and n. Generally the size of the unwanted output falls rapidly as m and n increase.

Due to the additional outputs, this form of distortion is definitely unwanted in audio, radio and telecommunication amplifiers, and it occurs for more than two waves as well.

In a narrowband system such as a radio communication system, unwanted outputs such as X-Y and 2X+Y will be remote from the wanted band and so be ignored by the system. In contrast, 2X-Y and 2Y-X will be close to the wanted signals. These so-called third order distortion products (third order as m+n = 3) tend to dominate the non-linear distortion of narrowband systems.

## Measurement

Amplitude distortion is measured with the system operating under steady-state conditions with a sinusoidal input signal. When other frequencies are present, the term "amplitude" refers to that of the fundamental only.

## See also

* Audio quality measurement
* Noise measurement
* Headroom

## External links

* Arcane Radio Trivia amplitude distortion article w/ examples
* RF article with trigonometry

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Amplitude distortion. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Amplitude_distortion&oldid=4109145"