Plasmon

Short description: Quasiparticle of charge oscillations in condensed matter

Not to be confused with plasmaron. For the brand of dried milk biscuit, see Plasmon biscuit.

Condensed matter physics

Phases * Phase transition * QCP

States of matter

Solid * Liquid * Gas * Plasma * Bose–Einstein condensate * Bose gas * Fermionic condensate * Fermi gas * Fermi liquid * Supersolid * Superfluidity * Luttinger liquid * Time crystal

* v
* t
* e

In physics, a plasmon is a quantum of plasma oscillation. Just as light (an optical oscillation) consists of photons, the plasma oscillation consists of plasmons. The plasmon can be considered as a quasiparticle since it arises from the quantization of plasma oscillations, just like phonons are quantizations of mechanical vibrations. Thus, plasmons are collective (a discrete number) oscillations of the free electron gas density. For example, at optical frequencies, plasmons can couple with a photon to create another quasiparticle called a plasmon polariton.

## Contents

* 1 Derivation
* 2 Explanation
* 2.1 Role
* 3 Surface plasmons
* 4 Possible applications
* 5 Plasmon-soliton
* 6 See also
* 7 Footnotes
* 8 References
* 9 External links

## Derivation

The plasmon was initially proposed in 1952 by David Pines and David Bohm[1] and was shown to arise from a Hamiltonian for the long-range electron-electron correlations.[2]

Since plasmons are the quantization of classical plasma oscillations, most of their properties can be derived directly from Maxwell's equations.[3]

## Explanation

Plasmons can be described in the classical picture as an oscillation of electron density with respect to the fixed positive ions in a metal. To visualize a plasma oscillation, imagine a cube of metal placed in an external electric field pointing to the right. Electrons will move to the left side (uncovering positive ions on the right side) until they cancel the field inside the metal. If the electric field is removed, the electrons move to the right, repelled by each other and attracted to the positive ions left bare on the right side. They oscillate back and forth at the plasma frequency until the energy is lost in some kind of resistance or damping. Plasmons are a quantization of this kind of oscillation.

### Role

Plasmons play a huge role in the optical properties of metals and semiconductors. Frequencies of light below the plasma frequency are reflected by a material because the electrons in the material screen the electric field of the light. Light of frequencies above the plasma frequency is transmitted by a material because the electrons in the material cannot respond fast enough to screen it. In most metals, the plasma frequency is in the ultraviolet, making them shiny (reflective) in the visible range. Some metals, such as copper[4] and gold,[5] have electronic interband transitions in the visible range, whereby specific light energies (colors) are absorbed, yielding their distinct color. In semiconductors, the valence electron plasmon frequency is usually in the deep ultraviolet, while their electronic interband transitions are in the visible range, whereby specific light energies (colors) are absorbed, yielding their distinct color[6][7] which is why they are reflective. It has been shown that the plasmon frequency may occur in the mid-infrared and near-infrared region when semiconductors are in the form of nanoparticles with heavy doping.[8][9]

The plasmon energy can often be estimated in the free electron model as

Ep=ℏne2mϵ0=ℏωp,

where n is the conduction electron density, e is the elementary charge, m is the electron mass, ϵ0 the permittivity of free space, ℏ the reduced Planck constant and ωp the plasmon frequency.

## Surface plasmons

Surface plasmons are those plasmons that are confined to surfaces and that interact strongly with light resulting in a polariton.[10] They occur at the interface of a material exhibiting positive real part of their relative permittivity, i.e. dielectric constant, (e.g. vacuum, air, glass and other dielectrics) and a material whose real part of permittivity is negative at the given frequency of light, typically a metal or heavily doped semiconductors. In addition to opposite sign of the real part of the permittivity, the magnitude of the real part of the permittivity in the negative permittivity region should typically be larger than the magnitude of the permittivity in the positive permittivity region, otherwise the light is not bound to the surface (i.e. the surface plasmons do not exist) as shown in the famous book by Heinz Raether.[11] At visible wavelengths of light, e.g. 632.8 nm wavelength provided by a He-Ne laser, interfaces supporting surface plasmons are often formed by metals like silver or gold (negative real part permittivity) in contact with dielectrics such as air or silicon dioxide. The particular choice of materials can have a drastic effect on the degree of light confinement and propagation distance due to losses. Surface plasmons can also exist on interfaces other than flat surfaces, such as particles, or rectangular strips, v-grooves, cylinders, and other structures. Many structures have been investigated due to the capability of surface plasmons to confine light below the diffraction limit of light. One simple structure that was investigated was a multilayer system of copper and nickel. Mladenovic et al. report the use of the multilayers as if its one plasmonic material.[12] Oxidation of the copper layers is prevented with the addition of the nickel layers. It is an easy path the integration of plasmonics to use copper as the plasmonic material because it is the most common choice for metallic plating along with nickel. The multilayers serve as a diffractive grating for the incident light. Up to 40 percent transmission can be achieved at normal incidence with the multilayer system depending on the thickness ratio of copper to nickel. Therefore, the use of already popular metals in a multilayer structure prove to be solution for plasmonic integration.

Surface plasmons can play a role in surface-enhanced Raman spectroscopy and in explaining anomalies in diffraction from metal gratings (Wood's anomaly), among other things. Surface plasmon resonance is used by biochemists to study the mechanisms and kinetics of ligands binding to receptors (i.e. a substrate binding to an enzyme). Multi-parametric surface plasmon resonance can be used not only to measure molecular interactions but also nanolayer properties or structural changes in the adsorbed molecules, polymer layers or graphene, for instance.

Surface plasmons may also be observed in the X-ray emission spectra of metals. A dispersion relation for surface plasmons in the X-ray emission spectra of metals has been derived (Harsh and Agarwal).[13]

Gothic stained glass rose window of Notre-Dame de Paris. Some colors were achieved by colloids of gold nano-particles.

More recently surface plasmons have been used to control colors of materials.[14] This is possible since controlling the particle's shape and size determines the types of surface plasmons that can be coupled into and propagate across it. This, in turn, controls the interaction of light with the surface. These effects are illustrated by the historic stained glass which adorn medieval cathedrals. Some stained glass colors are produced by metal nanoparticles of a fixed size which interact with the optical field to give glass a vibrant red color. In modern science, these effects have been engineered for both visible light and microwave radiation. Much research goes on first in the microwave range because at this wavelength, material surfaces and samples can be produced mechanically because the patterns tend to be on the order of a few centimeters. The production of optical range surface plasmon effects involves making surfaces which have features <400 nm. This is much more difficult and has only recently become possible to do in any reliable or available way.

Recently, graphene has also been shown to accommodate surface plasmons, observed via near field infrared optical microscopy techniques[15][16] and infrared spectroscopy.[17] Potential applications of graphene plasmonics mainly addressed the terahertz to midinfrared frequencies, such as optical modulators, photodetectors, biosensors.[18]

## Possible applications

The position and intensity of plasmon absorption and emission peaks are affected by molecular adsorption, which can be used in molecular sensors. For example, a fully operational device detecting casein in milk has been prototyped, based on detecting a change in absorption of a gold layer.[19] Localized surface plasmons of metal nanoparticles can be used for sensing different types of molecules, proteins, etc.

Plasmons are being considered as a means of transmitting information on computer chips, since plasmons can support much higher frequencies (into the 100 THz range, whereas conventional wires become very lossy in the tens of GHz). However, for plasmon-based electronics to be practical, a plasmon-based amplifier analogous to the transistor, called a plasmonstor, needs to be created.[20]

Plasmons have also been proposed as a means of high-resolution lithography and microscopy due to their extremely small wavelengths; both of these applications have seen successful demonstrations in the lab environment.

Finally, surface plasmons have the unique capacity to confine light to very small dimensions, which could enable many new applications.

Surface plasmons are very sensitive to the properties of the materials on which they propagate. This has led to their use to measure the thickness of monolayers on colloid films, such as screening and quantifying protein binding events. Companies such as Biacore have commercialized instruments that operate on these principles. Optical surface plasmons are being investigated with a view to improve makeup by L'Oréal and others.[21]

In 2009, a Korean research team found a way to greatly improve organic light-emitting diode efficiency with the use of plasmons.[22]

A group of European researchers led by IMEC has begun work to improve solar cell efficiencies and costs through incorporation of metallic nanostructures (using plasmonic effects) that can enhance absorption of light into different types of solar cells: crystalline silicon (c-Si), high-performance III-V, organic, and dye-sensitized. [23] However, for plasmonic photovoltaic devices to function optimally, ultra-thin transparent conducting oxides are necessary.[24] Full color holograms using plasmonics[25] have been demonstrated.

## Plasmon-soliton

Plasmon-soliton mathematically refers to the hybrid solution of nonlinear amplitude equation e.g. for a metal-nonlinear media considering both the plasmon mode and solitary solution. A soliplasmon resonance is on the other hand considered as a quasiparticle combining the surface plasmon mode with spatial soliton as a result of a resonant interaction.[26][27][28][29] To achieve one dimensional solitary propagation in a plasmonic waveguide while the surface plasmons should be localized at the interface, the lateral distribution of the field envelope should also be unchanged.

Graphene-based waveguide is a suitable platform for supporting hybrid plasmon-solitons due to the large effective area and huge nonlinearity.[30] For example, the propagation of solitary waves in a graphene-dielectric heterostructure may appear as in the form of higher order solitons or discrete solitons resulting from the competition between diffraction and nonlinearity.[31][32]

## See also

* Surface plasmon resonance
* Multi-parametric surface plasmon resonance
* Waves in plasmas
* Plasma oscillation
* Spinplasmonics
* Transformation optics
* Extraordinary optical transmission
* Phonon
* Graphene plasmonics
* Pines' demon

## Footnotes

1. ↑ Pines, David; Bohm, David (15 January 1952). "A Collective Description of Electron Interactions: II. Collective vs Individual Particle Aspects of the Interactions". Physical Review 85 (2): 338–353. doi:10.1103/PhysRev.85.338. Bibcode: 1952PhRv...85..338P. Cited after: Dror Sarid; William Challener (6 May 2010). Modern Introduction to Surface Plasmons: Theory, Mathematica Modeling, and Applications. Cambridge University Press. p. 1. ISBN 978-0-521-76717-0. https://books.google.com/books?id=rXU1OLdjFUsC&pg=PA1.
2. ↑ David Bohm, David Pines (1 November 1953). "Coulomb Interactions in a Degenerate Electron Gas". Phys. Rev.. A Collective Description of Electron Interactions: III. 92 (3): 609–625. doi:10.1103/physrev.92.609. Bibcode: 1953PhRv...92..609B. Cited after: N. J. Shevchik (1974). "Alternative derivation of the Bohm-Pines theory of electron-electron interactions". J. Phys. C: Solid State Phys. 7 (21): 3930–3936. doi:10.1088/0022-3719/7/21/013. Bibcode: 1974JPhC....7.3930S.
3. ↑ Jackson, J. D. (1975). "10.8 Plasma Oscillations". Classical Electrodynamics (2nd ed.). New York: John Wiley & Sons. ISBN 978-0-471-30932-1. OCLC 535998. https://archive.org/details/classicalelectro00jack_0.
4. ↑ Burdick, Glenn (1963). "Energy Band Structure of Copper". Physical Review 129 (1): 138–150. doi:10.1103/PhysRev.129.138. Bibcode: 1963PhRv..129..138B.
5. ↑ S. Zeng (2011). "A review on functionalized gold nanoparticles for biosensing applications". Plasmonics 6 (3): 491–506. doi:10.1007/s11468-011-9228-1.
6. ↑ Kittel, C. (2005). Introduction to Solid State Physics (8th ed.). John Wiley & Sons. p. 403, table 2.
7. ↑ Böer, K. W. (2002). Survey of Semiconductor Physics. 1 (2nd ed.). John Wiley & Sons. p. 525.
8. ↑ Xin Liu; Mark T. Swihart (2014). "Heavily-doped colloidal semiconductor and metal oxide nanocrystals: an emerging new class of plasmonic nanomaterials". Chem. Soc. Rev. 43 (11): 3908–3920. doi:10.1039/c3cs60417a. PMID 24566528.
9. ↑ Xiaodong Pi, Christophe Delerue (2013). "Tight-binding calculations of the optical response of optimally P-doped Si nanocrystals: a model for localized surface plasmon resonance". Physical Review Letters 111 (17): 177402. doi:10.1103/PhysRevLett.111.177402. PMID 24206519. Bibcode: 2013PhRvL.111q7402P. https://hal.archives-ouvertes.fr/hal-00877649/file/plasmon_Si_PRL_13.pdf.
10. ↑ Zeng, Shuwen; Yu, Xia; Law, Wing-Cheung; Zhang, Yating et al. (2013). "Size dependence of Au NP-enhanced surface plasmon resonance based on differential phase measurement". Sensors and Actuators B: Chemical 176: 1128–1133. doi:10.1016/j.snb.2012.09.073. http://www.unilim.fr/pages_perso/zeng/a13.pdf.
11. ↑ Raether, Heinz (1988). Surface Plasmons on Smooth and Rough Surfaces and on Gratings. Springer. p. 119. ISBN 978-3-540-17363-2.
12. ↑ Mladenović, I.; Jakšić, Z.; Obradov, M.; Vuković, S.; Isić, G.; Tanasković, D.; Lamovec, J. (17 April 2018). "Subwavelength nickel-copper multilayers as an alternative plasmonic material". Optical and Quantum Electronics 50 (5). doi:10.1007/s11082-018-1467-3. http://cer.ihtm.bg.ac.rs/bitstream/id/23832/bitstream_23832.pdf.
13. ↑ Harsh, O. K; Agarwal, B. K (1988). "Surface plasmon dispersion relation in the X-ray emission spectra of a semi-infinite rectangular metal bounded by a plane". Physica B+C 150 (3): 378–384. doi:10.1016/0378-4363(88)90078-2. Bibcode: 1988PhyBC.150..378H.
14. ↑ "LEDs work like butterflies' wings". BBC News. November 18, 2005. http://news.bbc.co.uk/1/hi/sci/tech/4443854.stm.
15. ↑ Jianing Chen; Michela Badioli; Pablo Alonso-González; Sukosin Thongrattanasiri; Florian Huth; Johann Osmond; Marko Spasenović; Alba Centeno et al. (5 July 2012). "Optical nano-imaging of gate-tunable graphene plasmons". Nature 487 (7405): 77–81. doi:10.1038/nature11254. PMID 22722861. Bibcode: 2012Natur.487...77C.
16. ↑ Z. Fei; A. S. Rodin; G. O. Andreev; W. Bao; A. S. McLeod; M. Wagner; L. M. Zhang; Z. Zhao et al. (5 July 2012). "Gate-tuning of graphene plasmons revealed by infrared nano-imaging". Nature 487 (7405): 82–85. doi:10.1038/nature11253. PMID 22722866. Bibcode: 2012Natur.487...82F.
17. ↑ Hugen Yan; Tony Low; Wenjuan Zhu; Yanqing Wu; Marcus Freitag; Xuesong Li; Francisco Guinea; Phaedon Avouris et al. (2013). "Damping pathways of mid-infrared plasmons in graphene nanostructures". Nature Photonics 7 (5): 394–399. doi:10.1038/nphoton.2013.57. Bibcode: 2013NaPho...7..394Y.
18. ↑ Tony Low; Phaedon Avouris (2014). "Graphene Plasmonics for Terahertz to Mid-Infrared Applications". ACS Nano 8 (2): 1086–1101. doi:10.1021/nn406627u. PMID 24484181. Bibcode: 2014arXiv1403.2799L.
19. ↑ Heip, H. M. (2007). "A localized surface plasmon resonance based immunosensor for the detection of casein in milk". Science and Technology of Advanced Materials 8 (4): 331–338. doi:10.1016/j.stam.2006.12.010. Bibcode: 2007STAdM...8..331M.
20. ↑ Lewotsky, Kristin (2007). "The Promise of Plasmonics". SPIE Professional. doi:10.1117/2.4200707.07.
21. ↑ "The L'Oréal Art & Science of Color Prize – 7th Prize Winners". http://www.loreal.com/_en/_ww/loreal-art-science/2004winners.aspx?#part2.
22. ↑ "Prof. Choi Unveils Method to Improve Emission Efficiency of OLED". KAIST. 9 July 2009. http://www.kaist.edu/english/01_about/06_news_01.php?req_P=bv&req_BIDX=10&req_BNM=ed_news&pt=17&req_VI=2181.
23. ↑ "EU partners eye metallic nanostructures for solar cells". ElectroIQ. 30 March 2010. http://www.electroiq.com/index/display/photovoltaics-article-display/1202724884/articles/Photovoltaics-World/industry-news/2010/march/eu-partners_eye_metallic.html.
24. ↑ Jephias Gwamuri; Ankit Vora; Rajendra R. Khanal; Adam B. Phillips; Michael J. Heben; Durdu O. Guney; Paul Bergstrom; Anand Kulkarni et al. (2015). "Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices". Materials for Renewable and Sustainable Energy 4 (12). doi:10.1007/s40243-015-0055-8.
25. ↑ Kawata, Satoshi. "New technique lights up the creation of holograms". Phys.org. http://phys.org/news/2012-03-technique-creation-holograms.html.
26. ↑ Ferrando, Albert (9 January 2017). "Nonlinear plasmonic amplification via dissipative soliton-plasmon resonances". Physical Review A 95 (1): 013816. doi:10.1103/PhysRevA.95.013816. Bibcode: 2017PhRvA..95a3816F.
27. ↑ Feigenbaum, Eyal; Orenstein, Meir (15 February 2007). "Plasmon-soliton". Optics Letters 32 (6): 674–6. doi:10.1364/OL.32.000674. PMID 17308598. Bibcode: 2007OptL...32..674F.
28. ↑ Milián, C.; Ceballos-Herrera, D. E.; Skryabin, D. V.; Ferrando, A. (5 October 2012). "Soliton-plasmon resonances as Maxwell nonlinear bound states". Optics Letters 37 (20): 4221–3. doi:10.1364/OL.37.004221. PMID 23073417. http://opus.bath.ac.uk/31812/1/Milian_Optics_Letters_2012_37_20_4221.pdf.
29. ↑ Bliokh, Konstantin Y.; Bliokh, Yury P.; Ferrando, Albert (9 April 2009). "Resonant plasmon-soliton interaction". Physical Review A 79 (4): 041803. doi:10.1103/PhysRevA.79.041803. Bibcode: 2009PhRvA..79d1803B.
30. ↑ Nesterov, Maxim L.; Bravo-Abad, Jorge; Nikitin, Alexey Yu.; García-Vidal, Francisco J.; Martin-Moreno, Luis (March 2013). "Graphene supports the propagation of subwavelength optical solitons". Laser & Photonics Reviews 7 (2): L7–L11. doi:10.1002/lpor.201200079. Bibcode: 2013LPRv....7L...7N.
31. ↑ Bludov, Yu. V.; Smirnova, D. A.; Kivshar, Yu. S.; Peres, N. M. R.; Vasilevskiy, M. I. (21 January 2015). "Discrete solitons in graphene metamaterials". Physical Review B 91 (4): 045424. doi:10.1103/PhysRevB.91.045424. Bibcode: 2015PhRvB..91d5424B.
32. ↑ Sharif, Morteza A. (January 2019). "Spatio-temporal modulation instability of surface plasmon polaritons in graphene-dielectric heterostructure". Physica E: Low-dimensional Systems and Nanostructures 105: 174–181. doi:10.1016/j.physe.2018.09.011. Bibcode: 2019PhyE..105..174S.

## References

* Stefan Maier (2007). Plasmonics: Fundamentals and Applications. Springer. ISBN 978-0-387-33150-8.
* Michael G. Cottam; David R. Tilley (1989). Introduction to Surface and Superlattice Excitations. Cambridge University Press. ISBN 978-0-521-32154-9.
* Heinz Raether (1980). Excitation of plasmons and interband transitions by electrons. Springer-Verlag. ISBN 978-0-387-09677-3.
* Barnes, W. L.; Dereux, A.; Ebbesen, Thomas W. (2003). "Surface plasmon subwavelength optics". Nature 424 (6950): 824–830. doi:10.1038/nature01937. PMID 12917696. Bibcode: 2003Natur.424..824B.
* Zayats, Anatoly V.; Smolyaninov, Igor I.; Maradudin, Alexei A. (2005). "Nano-optics of surface plasmon polaritons". Physics Reports 408 (3–4): 131–314. doi:10.1016/j.physrep.2004.11.001. Bibcode: 2005PhR...408..131Z.
* Atwater, Harry A. (2007). "The Promise of Plasmonics". Scientific American 296 (4): 56–63. doi:10.1038/scientificamerican0407-56. PMID 17479631. Bibcode: 2007SciAm.296d..56A.
* Ozbay, Ekmel (2006). "Plasmonics: Merging Photonics and Electronics at Nanoscale Dimensions". Science 311 (5758): 189–193. doi:10.1126/science.1114849. PMID 16410515. Bibcode: 2006Sci...311..189O. http://repository.bilkent.edu.tr/bitstream/11693/38263/1/Plasmonics Merging Photonics and Electronics at Nanoscale Dimensions.pdf.
* Schuller, Jon; Barnard, Edward; Cai, Wenshan; Jun, Young Chul et al. (2010). "Plasmonics for Extreme Light Concentration and Manipulation". Nature Materials 9 (3): 193–204. doi:10.1038/nmat2630. PMID 20168343. Bibcode: 2010NatMa...9..193S.
* Brongersma, Mark; Shalaev, Vladimir (2010). "The case for plasmonics". Science 328 (5977): 440–441. doi:10.1126/science.1186905. PMID 20413483. Bibcode: 2010Sci...328..440B.

## External links

* Active plasmonics
* Reactive plasmonics
* Plasmonic computer chips move closer

* v
* t
* e

Particles in physics

Elementary|

| Fermions|

| Quarks|

* Up (quark
* antiquark)
* Down (quark
* antiquark)
* Charm (quark
* antiquark)
* Strange (quark
* antiquark)
* Top (quark
* antiquark)
* Bottom (quark
* antiquark)

|

Leptons|

* Electron
* Positron
* Muon
* Antimuon
* Tau
* Antitau
* Electron neutrino
* Electron antineutrino
* Muon neutrino
* Muon antineutrino
* Tau neutrino
* Tau antineutrino

Bosons|

| Gauge|

* Photon
* Gluon
* W and Z bosons

|

Scalar|

* Higgs boson

Ghost fields|

* Faddeev–Popov ghosts

Hypothetical|

| Superpartners|

| Gauginos|

* Gluino
* Gravitino
* Photino

|

Others|

* Higgsino
* Neutralino
* Chargino
* Axino
* Sfermion (Stop squark)

Others|

* Planck particle
* Axion
* Dilaton
* Dual graviton
* Graviton
* Leptoquark
* Majoron
* Majorana fermion
* Magnetic monopole
* Preon
* Sterile neutrino
* Tachyon
* W′ and Z′ bosons
* X and Y bosons

Composite|

| Hadrons|

| Baryons / hyperons|

* Nucleon
* Proton
* Antiproton
* Neutron
* Antineutron
* Delta baryon
* Lambda baryon
* Sigma baryon
* Xi baryon
* Omega baryon

|

Mesons / quarkonia|

* Pion
* Rho meson
* Eta and eta prime mesons
* Phi meson
* J/psi meson
* Omega meson
* Upsilon meson
* Kaon
* B meson
* D meson

Exotic hadrons|

* Tetraquark
* Pentaquark

Others|

* Atomic nuclei
* Atoms
* Exotic atoms
* Positronium
* Muonium
* Tauonium
* Onia
* Superatoms
* Molecules

Hypothetical|

| Hypothetical baryons|

* Hexaquark
* Skyrmion

|

Hypothetical mesons|

* Glueball
* Theta meson
* T meson

Others|

* Mesonic molecule
* Pomeron
* Diquarks

Quasiparticles|

* Davydov soliton
* Dropleton
* Exciton
* Hole
* Magnon
* Phonon
* Plasmaron
* Plasmon
* Polariton
* Polaron
* Roton
* Trion

Lists|

* Baryons
* Mesons
* Particles
* Quasiparticles
* Timeline of particle discoveries

Related|

* History of subatomic physics
* timeline
* Standard Model
* mathematical formulation
* Subatomic particles
* Particles
* Antiparticles
* Nuclear physics
* Eightfold Way
* Quark model
* Exotic matter
* Massless particle
* Relativistic particle
* Virtual particle
* Wave–particle duality
* Particle chauvinism

Wikipedia books|

* Hadronic Matter
* Particles of the Standard Model
* Leptons
* Quarks

Physics portal

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Plasmon. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Plasmon&oldid=416163"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template