Reflector (photography)

Short description: Reflective surface used to redirect light towards a given subject or scene, used in photography

A traditional umbrella-style reflector, used to diffuse light from a photographic lamp to which it is normally attached.

In photography and cinematography, a reflector is an improvised or specialised reflective surface used to redirect light towards a given subject or scene.

## Contents

* 1 Types
* 1.1 Lamp reflectors
* 1.2 Board reflectors
* 2 Techniques with board reflectors
* 2.1 Bounce lighting
* 2.2 Outdoor techniques
* 3 See also
* 4 References

## Types

Apart from certain highly specialized components found in enlargers, projectors and scanners, photographic reflectors fall into two main groups:

### Lamp reflectors

Diagram of a lamp reflector, showing path that light typically takes from a light source.

Umbrella - studio flash.

Similar to a domestic lampshade, these reflectors are fixed to an artificial light source (for example, a filament bulb or flash tube) to direct and shape the otherwise scattered light, reflecting it off their concave inner surfaces and directing it towards the scene to be photographed. Although there are a large number of variants, the most common types are:

* spherical, short-sided, giving a relatively broad spread of light;
* parabolic, providing a tighter, parallel beam of light.

The reflector factor is the ratio of the illumination provided by a lamp fitted within a reflector to the illumination provided without any reflector fitted. A matte reflector will typically have a reflector factor of around 2, due to its more diffuse effect, while a polished or metallic-finished reflector may have a factor of up to 6.[1]

### Board reflectors

Also known as plane reflectors, "flats" or bounce boards, this kind of reflector is located independent of a light source; the light is reflected off its surface, either to achieve a broader light source, or control shadows and highlights, or both. This kind of reflector generally has a very low reflectivity factor that varies widely according to surface texture and colour.[2] As a result, it is most commonly used to control contrast in both artificial and natural lighting, in place of a fill light or "kick" light. In this case, light "spilling" from the main ambient or key light illuminating a scene is reflected back into the scene with a varying degrees of precision and intensity, according to the chosen reflective surface and its position relative to the scene.

Reflectors may also be used as a means of increasing the size of the main light source, which may (or may not) retain a direct path to the scene. By positioning a board reflector close to a light source, its effective size can be increased by "bouncing" the light off it.[3] A very common example of this technique is the traditional umbrella reflector, invented by George Larson,[4] typically having a gold, silver or matte white interior onto which a lamp fitted with a circular reflector is projected, providing a broad, soft illumination. The lamp faces away from the scene to be photographed, allowing only reflected light to be thrown forward. Types of Reflector. 1 Dispersive reflector. 2 Holophane. 3 optical combination 4 concentrating 5 Angle.

## Techniques with board reflectors

A portable folding reflector positioned to "bounce" sunlight onto a model

Reflectors vary enormously in size, colour, reflectivity and portability. In tabletop still life photography, small mirrors and card stock are used extensively, both to reduce lighting contrast and create highlights on reflective subjects such as glassware and jewelry. Larger-scale subjects such as motor vehicles require the use of huge "flats", often requiring specialised motorized winches to position them accurately.
Location photography calls for much more portable materials and a large range of lightweight, folding reflectors are commercially available in a variety of colors.

### Bounce lighting

Photographers make regular use of walls, ceilings and even entire rooms as reflectors, especially with the interior of buildings which may lack sufficient available light. Often known as "bounce flash" photography, but equally common with Tungsten lights in cinematography. Used extensively throughout film history, in 1956 Subrata Mitra further pioneered the technique with the use of large scale diffusers to match studio lighting with location shooting.[5][6]

The area to be photographed is lit by walls off-camera, which then provide illumination similar to that of a large window. When "bounced" off a ceiling, the lighting resembles that of fluorescent tubes. As this very broad, flat lighting is more typical of an overcast day outdoors, a more realistic interior illumination is achieved by reducing the power of additional lighting relative to the available light, so that either source may act as a fill to the other. Hence bounce lighting may provide either the primary or secondary (fill) light source, depending on its intensity.

### Outdoor techniques

Walls also make ideal reflectors outdoors, reflecting sunlight back upon a subject and reducing shadows (and hence overall contrast) according to the color, size and proximity of the wall. A more readily available alternative is the portable, lightweight, collapsible reflector, commercially available in a range of sizes and colors, or improvised using a sheet of card stock or even a bed sheet. Stands may be erected to retain these reflectors, although it is often much more convenient and practical to have an assistant hold and move them.[citation needed]

## See also

* Beauty dish
* Flash
* Lighting
* Softbox
* Striplight

## References

1. ↑ Focal Encyclopedia of Photography, Leslie Stroebel, Richard D. Zakia, (Focal Press, 3rd edn.) p. 689
2. ↑ Focal Encyclopedia of Photography, Leslie Stroebel, Richard D. Zakia, (Focal Press, 3rd edn.) p. 60
3. ↑ Basic Photography Course
4. ↑ Grommet secured and reversible light reflecting device, 1973-11-09, https://patents.google.com/patent/US3873821A/en, retrieved 2018-05-16
5. ↑ "Subrata Mitra". Internet Encyclopedia of Cinematographers. http://www.cinematographers.nl/GreatDoPh/mitra.htm.
6. ↑ Cardullo, Bert (November 2005). "Revisiting Satyajit Ray: An Interview with a Cinema Master". Bright Lights Film Journal (50). http://www.brightlightsfilm.com/50/rayiv.htm. Retrieved 2009-05-24.

* v
* t
* e

Photography

Terminology|

* 35 mm equivalent focal length
* Angle of view
* Aperture
* Black and white
* Chromatic aberration
* Circle of confusion
* Color balance
* Color temperature
* Depth of field
* Depth of focus
* Exposure
* Exposure compensation
* Exposure value
* Zebra patterning
* F-number
* Film format
* Large
* Medium
* Film speed
* Focal length
* Guide number
* Hyperfocal distance
* Metering mode
* Orb (optics)
* Perspective distortion
* Photograph
* Photographic printing
* Photographic processes
* Reciprocity
* Red-eye effect
* Science of photography
* Shutter speed
* Sync
* Zone System

Genres|

* Abstract
* Aerial
* Aircraft
* Architectural
* Astrophotography
* Banquet
* Conceptual
* Conservation
* Cloudscape
* Documentary
* Ethnographic
* Erotic
* Fashion
* Fine-art
* Fire
* Forensic
* Glamour
* High-speed
* Landscape
* Lomography
* Nature
* Neues Sehen
* Nude
* Photojournalism
* Pornography
* Portrait
* Post-mortem
* Selfie
* Social documentary
* Sports
* Still life
* Stock
* Street
* Vernacular
* Underwater
* Wedding
* Wildlife

Techniques|

* Afocal
* Bokeh
* Brenizer
* Burst mode
* Contre-jour
* Cyanotype
* ETTR
* Fill flash
* Fireworks
* Harris shutter
* HDRI
* High-speed
* Holography
* Infrared
* Intentional camera movement
* Kirlian
* Kite aerial
* Long-exposure
* Macro
* Mordançage
* Multiple exposure
* Night
* Panning
* Panoramic
* Photogram
* Print toning
* Redscale
* Rephotography
* Rollout
* Scanography
* Schlieren photography
* Sabattier effect
* Slow motion
* Stereoscopy
* Stopping down
* Strip
* Slit-scan
* Sun printing
* Tilt–shift
* Miniature faking
* Time-lapse
* Ultraviolet
* Vignetting
* Xerography

Composition|

* Diagonal method
* Framing
* Headroom
* Lead room
* Rule of thirds
* Simplicity
* Golden triangle (composition)

Equipment|

* Camera
* light-field
* field
* instant
* pinhole
* press
* rangefinder
* SLR
* still
* TLR
* toy
* view
* Darkroom
* enlarger
* safelight
* Film
* base
* format
* holder
* stock
* available films
* discontinued films
* Filter
* Flash
* beauty dish
* cucoloris
* gobo
* hood
* hot shoe
* monolight
* Reflector
* snoot
* Softbox
* Lens
* Wide-angle lens
* Zoom lens
* Telephoto lens
* Manufacturers
* Monopod
* Movie projector
* Slide projector
* Tripod
* head
* Zone plate

History|

* Timeline of photography technology
* Analog photography
* Autochrome Lumière
* Box camera
* Calotype
* Camera obscura
* Daguerreotype
* Dufaycolor
* Heliography
* Painted photography backdrops
* Photography and the law
* Glass plate
* Visual arts

Digital
photography|

* Digital camera
* D-SLR
* comparison
* MILC
* camera back
* Digiscoping
* Digital versus film photography
* Film scanner
* Image sensor
* CMOS APS
* CCD
* Three-CCD camera
* Foveon X3 sensor
* Image sharing
* Pixel

Color
photography|

* Color
* Print film
* Chromogenic print
* Reversal film
* Color management
* color space
* primary color
* CMYK color model
* RGB color model

Photographic
processing|

* Bleach bypass
* C-41 process
* Cross processing
* Developer
* Digital image processing
* Dye coupler
* E-6 process
* Fixer
* Gelatin silver process
* Gum printing
* Instant film
* K-14 process
* Print permanence
* Push processing
* Stop bath

Lists|

* Most expensive photographs
* Photographers
* Norwegian
* Polish
* street
* women

* Category
* Portal
* Outline

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Reflector (photography). Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Reflector_(photography)&oldid=2931466"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template