Wake

Short description: Region of recirculating flow immediately behind or downstream of a moving or stationary solid body

Kelvin wake pattern generated by a small boat.

In fluid dynamics, a wake may either be:

* the region of recirculating flow immediately behind a moving or stationary blunt body, caused by viscosity, which may be accompanied by flow separation and turbulence, or
* the wave pattern on the water surface downstream of an object in a flow, or produced by a moving object (e.g. a ship), caused by density differences of the fluids above and below the free surface and gravity (or surface tension).

## Contents

* 1 Viscosity
* 2 Density differences
* 2.1 Kelvin wake pattern
* 3 Other effects
* 4 Recreation
* 5 See also
* 6 References
* 7 External links

## Viscosity

Visualisation of the Kármán vortex street in the wake behind a circular cylinder in air; the flow is made visible through release of oil vapour in the air near the cylinder.

The wake is the region of disturbed flow (often turbulent) downstream of a solid body moving through a fluid, caused by the flow of the fluid around the body.

For a blunt body in subsonic external flow, for example the Apollo or Orion capsules during descent and landing, the wake is massively separated and behind the body is a reverse flow region where the flow is moving toward the body. This phenomenon is often observed in wind tunnel testing of aircraft, and is especially important when parachute systems are involved, because unless the parachute lines extend the canopy beyond the reverse flow region, the chute can fail to inflate and thus collapse. Parachutes deployed into wakes suffer dynamic pressure deficits which reduce their expected drag forces. High-fidelity computational fluid dynamics simulations are often undertaken to model wake flows, although such modeling has uncertainties associated with turbulence modeling (for example RANS versus LES implementations), in addition to unsteady flow effects. Example applications include rocket stage separation and aircraft store separation.

## Density differences

In incompressible fluids (liquids) such as water, a bow wake is created when a watercraft moves through the medium; as the medium cannot be compressed, it must be displaced instead, resulting in a wave. As with all wave forms, it spreads outward from the source until its energy is overcome or lost, usually by friction or dispersion.

The non-dimensional parameter of interest is the Froude number.

Wave cloud pattern in the wake of the Île Amsterdam (lower left, at the "tip" of the triangular formation of clouds) in the southern Indian Ocean

Cloud wakes from the Juan Fernández Islands

Wake patterns in cloud cover over Possession Island, East Island, Ile aux Cochons, Île des Pingouins

### Kelvin wake pattern

This section is an excerpt from Kelvin wake pattern[ edit ]

## Other effects

The above describes an ideal wake, where the body's means of propulsion has no other effect on the water. In practice the wave pattern between the V-shaped wavefronts is usually mixed with the effects of propeller backwash and eddying behind the boat's (usually square-ended) stern.

The Kelvin angle is also derived for the case of deep water in which the fluid is not flowing in different speed or directions as a function of depth ("shear"). In cases where the water (or fluid) has shear, the results may be more complicated.[1] Also, the deep water model neglects surface tension, which implies that the wave source is large compared to capillary length.

## Recreation

"No wake zones" may prohibit wakes in marinas, near moorings and within some distance of shore[2] in order to facilitate recreation by other boats and reduce the damage wakes cause. Powered narrowboats on British canals are not permitted to create a breaking wash (a wake large enough to create a breaking wave) along the banks, as this erodes them. This rule normally restricts these vessels to 4 knots (4.6 mph; 7.4 km/h) or less.

Wakes are occasionally used recreationally. Swimmers, people riding personal watercraft, and aquatic mammals such as dolphins can ride the leading edge of a wake. In the sport of wakeboarding the wake is used as a jump. The wake is also used to propel a surfer in the sport of wakesurfing. In the sport of water polo, the ball carrier can swim while advancing the ball, propelled ahead with the wake created by alternating armstrokes in crawl stroke, a technique known as dribbling.

## See also

* Bow shock (aerodynamics)
* Slipstream
* Wake turbulence
* Karman vortex street

## References

1. ↑ Norwegian University of Science and Technology, "A 127-year-old physics riddle solved", Phys.org, Aug 21, 2019. Retrieved 22 August 2019
2. ↑ BoatWakes.org, Table of distances

## External links

* Erosion caused by boat wakes
* NIST detailed derivation

0.00

(0 votes)

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Physics:Wake&oldid=407311"