Hare-Clark electoral system

Hare-Clark is a type of single transferable vote electoral system of proportional representation used for elections in Tasmania and the Australian Capital Territory. The method for the distribution of preferences is similar to other voting systems in Australia , such as for the Australian Senate, however, the Hare-Clark method gives precedence to individual candidates. Voters are not given the option to vote for parties 'above the line', but instead must number individual candidates in order of preference. The name is derived from English barrister, Thomas Hare, and the Tasmanian Attorney General, Andrew Inglis Clark, who first introduced the modified counting system to Tasmania in 1896.

## Contents

* 1 History
* 1.1 Evolution
* 2 Counting
* 2.1 Counting method with example
* 3 See also
* 4 References
* 5 Further reading
* 6 External links

## History

Thomas Hare (1806–91) is generally credited with the conception of the single transferable vote, while Andrew Inglis Clark (1848-1907) introduced the system to Tasmania with a modified counting method. "The specific modification introduced by Mr A I Clark, Attorney-General for Tasmania, is the provision devised by him for eliminating the element of chance in the selection and distribution of quota-excesses or surplus transfer votes."[1] The provision described as "Clark's own" was to transfer all votes to 'next order of preference', rather than a random sample.[2]

In 1896, after several failed attempts, Clark was able to get a system of proportional representation adopted by the Tasmanian Parliament, but it was to be only on a trial basis for both Hobart (to elect 6 MPs) and Launceston (to elect 4 MPs). This first 'Hare-Clark system', as it was immediately known, was renewed annually until suspended in 1902. Clark, never in robust health, died at his home 'Rosebank' in Battery Point on 14 November 1907, just as permanent proportional representation struggled through Parliament and over a year before it was used for the first time throughout Tasmania at the general election in April 1909.[2]

Hare-Clark has been used continuously for Tasmanian state elections since 1909[3] for the House of Assembly. The Legislative Council[4] is elected by the same system as is used to elect members of the Australian House of Representatives.[5] The Hare-Clark System was adopted to be used for the Australian Capital Territory Legislative Assembly in 1992.[6][7]

### Evolution

Features of Hare-Clark have evolved over time. Until 1942, candidates were listed in alphabetic order rather than grouped together by party.[3] Robson rotation, where the order candidates appeared on ballot papers is randomised, was introduced in 1980. This has the effect of reducing any advantage a candidate has by appearing at the top of a party list,[8] so as to eliminate any influence of the so-called "donkey vote".

## Counting

After a candidate reaches a quota and is elected, all of their ballot papers are distributed to elect further candidates (according to the voters next preference on each ballot paper). The distributed votes have a lesser transfer value which depends on the excess number of votes the previously elected candidate received. If no candidates are elected, the candidate with the fewest votes is eliminated and their preferences are distributed accordingly.

In terms of how the count is conducted, there are only minor differences between Hare-Clark and Australian Senate-style systems. Senate systems allow 'above the line' voting (voters preference political parties) and the parties determine the order their candidates appear on the ballot paper. Under Hare-Clark, preferences are always determined by voters (voters preference individual candidates). The distribution of how-to-vote cards outside polling places on election day is also banned.[3]

### Counting method with example

1\. Initial count

Any invalid votes are excluded (e.g. no boxes marked) and then the first preferences from each ballot paper is tallied

Example:

Of the total 10,500 votes cast by the electorate, 500 are invalid.
There are 10,000 valid votes remaining.

2\. Determining the quota

The total count of valid votes is used to calculate the quota of votes required for a candidate to be declared elected.

quota to be elected=(total valid votes +1number of vacancies+1)

Example:

There are 10,000 valid votes and 3 vacancies to be filled.

2,500.25=(10,000 +13+1)

The quota to be elected is 2501 votes.

3\. Declaring candidates elected

Candidates are elected when they have the required quota of votes, any surplus votes are distributed as outlined in 4 below. If no candidates have a surplus of votes and there are vacancies remaining the count proceeds to 5. The count is complete if there are no remaining vacancies.

Example:

Candidate PLATYPUS receives 3,000 first preference votes, and is more than the quota of 2,501.
Candidate PLATYPUS is declared elected.

4\. Candidates with surplus votes

The number of votes in excess of the quota is a surplus of votes. The number of surplus votes is used to determine the transfer value of distributed preferences from the candidate.

4a. The transfer value is determined

transfer value=(surplus voteslast votes received)

Example:

Candidate PLATYPUS has 3,000 first preference votes, which is a 499 surplus above the quota.

0.17=(4993,000)

The transfer value from PLATYPUS is 0.17.

4b. Distribution of preferences

The preferences from the elected candidate is tallied using all of their ballot papers, and is distributed at the rate of the transfer value.

value of distributed preferences=transfer value*number of preferences

Example:

Of the 3,000 first preference votes for Candidate PLATYPUS, 1,000 had Candidate WOMBAT as second preference. WOMBAT receives these votes but at the value of the transfer rate.

170=0.17*1,000

Candidate WOMBAT has 170 added to their total.

4c. Counting the new totals

The new candidate totals are counted (return to 3).

5\. Remaining candidates have not reached the quota

When there are still vacancies, but all the remaining candidates are equal to or less than the quota, the candidate with the lowest current vote is excluded. The preferences of the excluded candidate is then distributed and new candidate totals are counted (return to 3). The count is complete if the number of candidates remaining is the same as remaining vacancies.

## See also

* Hare quota

## References

1. ↑ Johnston, R. M. (1897). Observations on the working results of the Hare System of Election in Tasmania. (p.13)
2. ↑ 2.0 2.1 "Founders of our Electoral System". Parliament of Tasmania. 2005. Archived from the original on 15 May 2009. https://web.archive.org/web/20090515042210/http://www.parliament.tas.gov.au/tpl/backg/Founders.htm. Retrieved 2009-04-12.
3. ↑ 3.0 3.1 3.2 Green, Antony (2 February 2006). "Hare-Clark Explained". Australian Broadcasting Corporation. http://www.abc.net.au/elections/tas/2006/guide/hareclark.htm.
4. ↑ "Legislative Council 2013 Annual Review". http://www.parliament.tas.gov.au/lc/lcarep1213.pdf.
5. ↑ "Legislative Council 2013 Annual Review". http://www.parliament.tas.gov.au/lc/lcarep1213.pdf.
6. ↑ "The Hare-Clark System of Proportional Representation". Proportional Representation Society of Australia. http://prsa.org.au/hareclar.htm.
7. ↑ "Clark, Andrew Inglis (1848 -1907)". Australian Dictionary of Biography. 1969. http://adbonline.anu.edu.au/biogs/A030378b.htm. Retrieved 2009-04-07.
8. ↑ Green, Antony (3 July 2008). "Review of Robson Rotation in Tasmania". Australian Broadcasting Corporation. http://blogs.abc.net.au/antonygreen/2008/07/review-of-robso.html.

## Further reading

* Election 2014: Tasmania's Hare-Clark Electoral System
* Hare-Clark Explained - Tasmanian Electoral Commission (video)

## External links

* Parliament of Tasmania
* Tasmanian Electoral Commission
* ACT Electoral Commission

0.00

(0 votes)

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Social:Hare-Clark_electoral_system&oldid=1061402"