Single transferable vote

Short description: Proportional representation voting system

Simplified example of an STV ballot

The single transferable vote (STV), sometimes known as proportional ranked choice voting (P-RCV),[lower-alpha 1] is a multi-winner electoral system in which each voter casts a single vote in the form of a ranked-choice ballot. Voters have the option to rank candidates, and their vote may be transferred according to alternate preferences if their preferred candidate is eliminated or elected with surplus votes, so that their vote is used to elect someone they prefer over others in the running. STV aims to approach proportional representation based on votes cast in the district where it is used, so that each vote is worth about the same as another. Formally, STV satisfies a fairness criterion known as proportionality for solid coalitions.[1]

Under STV, no one party or voting bloc can take all the seats in a district unless the number of seats in the district is very small or almost all the votes cast are cast for one party's candidates (which is seldom the case). This makes it different from other district voting systems. In majoritarian or plurality systems - such as first-past-the-post (FPTP), instant-runoff voting (IRV; also known as the alternative vote), block voting, and ranked-vote block voting - one party or voting bloc can take all the seats in a district.

The key to STV's approximation of proportionality is that each voter effectively only casts a single vote in a district contest electing multiple winners, while the ranked ballots (and sufficiently large districts) allow the results to approach proportionality. The use of a quota means that, for the most part, each successful candidate is elected with the same number of votes. This equality produces fairness - a party taking twice the votes than another party will take twice the seats compared to that other party.

Under STV, multiple winners are selected for a constituency (a multi-member district). Every sizeable group within the district wins at least one seat: the more seats the district has, the smaller the size of the group needed to elect a member. In this way, STV provides approximately proportional representation, ensuring that substantial minority factions have some representation.

STV is distinguished from plurality voting systems, like FPTP, plurality block voting and the single non-transferable vote (SNTV) by the fact that votes are transferable under STV but are not under the other systems. STV reduces the number of "wasted" votes, votes which are cast for unsuccessful candidates by electing multiple representatives for a district. Additionally, surplus votes collected by successful candidates are transferred to aid other candidates, preventing waste caused by successful candidates receiving votes over and above those actually needed to secure the seat.

An important characteristic of STV is that it enables votes to be cast for individual candidates rather than for parties. Party lists are therefore not needed (as opposed to many other proportional electoral systems); it is the voters who create their own ordered list of candidates. The ranked voting also allows voters to form consensus behind the most popular candidates.[2]

## Contents

* 1 District magnitudes and proportionality
* 2 Process
* 2.1 Example for a non-partisan election
* 2.1.1 Compared to other systems
* 2.2 Example for an election with parties
* 2.2.1 First round
* 2.2.2 Second, third and fourth rounds
* 2.2.3 Fifth and sixth rounds
* 2.2.4 Seventh round
* 2.2.5 Compared to other systems
* 3 Related voting systems
* 4 Terminology
* 5 Balloting
* 6 Seat filling by quota
* 6.1 Election
* 6.2 Vote transfers and quota
* 6.3 Transfers of votes of eliminated candidates
* 6.4 Transfers of surplus votes
* 7 History
* 7.1 Origin
* 7.2 Australia
* 7.3 Canada
* 7.4 United States
* 8 List of users
* 8.1 National legislatures
* 8.2 Other bodies
* 8.2.1 Indirect
* 8.3 Historic use of STV for election of legislative bodies
* 9 Benefits
* 10 Issues
* 10.1 Degree of proportionality
* 10.2 Difficulty of implementation
* 10.3 Role of political parties
* 10.4 By-elections
* 10.5 Tactics
* 10.6 Elector confusion
* 10.7 Other
* 11 Analysis of results
* 11.1 Migration of preferences
* 11.2 Effective votes
* 12 See also
* 13 Notes
* 14 References
* 14.1 Bibliography
* 15 Further reading
* 16 External links

## District magnitudes and proportionality

Historically, the district magnitude under STV elections has ranged from two (the absolute minimum) to 21 (currently being used in New South Wales, Australia to elect the Legislative Council, half at a time). In higher-level government elections district magnitude is usually in the 3 to 5 or 7 range, with NSW being an obvious exception.[3][4] In local government elections such as city councils, STV elections are often held city wide with district magnitudes in the 6 to 13 range, or wards may be used, electing 2 to 5 members in each ward.[5][6][7]

If the Droop quota is used, for example, in a nine-seat district, the quota or threshold is 10% (plus one vote); in a three-seat district, it is 25% (plus one vote). This electoral threshold is significantly higher than for most party-list PR systems, but a set fraction of the votes cast in a district covering just part of a jurisdiction may involve an equivalent or fewer number of votes as compared to a smaller percentage across a whole jurisdiction.

District elections grow more proportionally representative in direct relation to the increase in the number of seats to be elected in a constituency - the more seats, the more the distribution of the seats in a district will be proportional. For example, in a three-seat STV election using the Hare quota of (valid votes cast)/(seats to fill), a candidate or party with at least one-third of the votes is guaranteed to win a seat. In a seven-seat STV contest using the Hare quota, any candidate with one-seventh of the vote (either first preferences alone, or a combination of first preferences and lower-ranked preferences transferred from other candidates) will win a seat. Many systems use the Droop quota, which is even smaller than the Hare for the same number of seats, as it produces more proportional results.

Because of this quota-based fairness, under STV it is extremely rare for a party to take a majority of the seats in a district without the support of a majority of the district's voters. Additionally, a large majority of voters (generally around 80 percent or more) see their vote used to elect someone. Thus under STV, the candidates who make up a majority of the district's elected members are supported directly by a majority of the voters in the district.

## Process

In a single transferable vote (STV) system, the voter ranks candidates in order of preference on their ballot. A vote is initially allocated to the voter's first preference.

A quota (the minimum number of votes that guarantees election) is calculated by a specified method (usually in STV using the Hare or Droop methods), and candidates who accumulate that many votes are declared elected. In many STV systems, the quota is also used to determine surplus votes, the number of votes received by successful candidates over and above the quota. Surplus votes are transferred to candidates ranked lower in the voters' preferences, so they would not be wasted by remaining with a candidate who does not need them.

If seats remain open after this first count, surplus votes are transferred to generate the necessary winners. The specific method of transferring votes varies in different systems (see § Vote transfers and quota). Transfer of any existing surplus votes is done before eliminations of candidates. This prevents a party from losing a candidate in the early stage who might be elected later through transfers.[8] When surplus votes are transferred under some systems, the vote is apportioned fractionally to different candidates. In others, transfers are done using whole votes.

If seats still remain to be filled, there are no surplus votes to transfer, and none of the remaining candidates' votes have reached the quota, the least popular candidate is eliminated. The votes are transferred to the next-preferred candidate rather than being discarded; if the next-preferred choice has already been eliminated or elected, the procedure is iterated to lower-ranked candidates.

Counting, eliminations, and vote transfers continue until enough candidates are declared elected (all seats are filled by candidates reaching the quota) or until there are only as many remaining candidates as there are unfilled seats, at which point the remaining candidates are declared elected.

### Example for a non-partisan election

Suppose an election is conducted to determine what three foods to serve at a party. There are seven choices: Oranges, Pears, Strawberries, Cake (of the strawberry/chocolate variety), Chocolate, Hamburgers and Chicken. Only three of these may be served to the 23 guests. STV is chosen to make the decision, with the whole-vote method used to transfer surplus votes. The hope is that each guest will be served at least one food that they are happy with.

To select the three foods, each guest is given one vote - they each mark their first preference and are also allowed to cast two back-up preferences to be used only if their first-preference food cannot be selected or to direct a transfer if the first-preference food is chosen with a surplus of votes. The 23 guests at the party mark their ballots: some mark first, second and third preferences; some mark only two preferences.

When the ballots are counted, it is found that the ballots are marked in seven distinct combinations, as shown in the table below:

1st preference  |  |  |  |  |  |  |

|
|
|
|
|
|
|

2nd preference  |  |  |  |  |  |  |
3rd preference  |  |  |  |  |  |  |
# of ballots  | 3  | 8  | 1  | 3  | 1  | 4  | 3

The table is read as columns: the left-most column shows that there were three ballots with Orange as the first choice and Pear as second, while the right-most column shows there were three ballots with Chicken as first choice, Chocolate as second, and Hamburger as third.

The election step-by-step:

Step  | Votes for each option

|

|  |  |  |  |  |
Setting the quota  | The quota is 6
Step 1  | 3  | 8

ELECTED

(2 surplus vote)

| 1  | 3  | 1  | 4  | 3
Step 2  | 3  | ELECTED  | 1 + 2 = 3 | 3  | 1  | 4  | 3
Step 3  | 3  | ELECTED  | 3  | 3 + 1 = 4 | eliminated | 4  | 3
Step 4  | 3 + 1 = 4 | ELECTED  | eliminated | 4 + 2 = 6

ELECTED

(0 surplus votes)

| eliminated | 4  | 3
Step 5  | 4  | ELECTED  | eliminated | ELECTED  | eliminated | 4 + 3 = 7

ELECTED

(1 surplus vote)

| eliminated
Result  |  | ELECTED  |  | ELECTED  |  | ELECTED  |
A Sankey chart illustrating the vote process. Not shown is the one-vote transfer from Strawberry to Oranges in Step 4.

Setting the quota: The Droop quota formula is used to produce the quota (the number of votes required to be automatically declared elected) = floor(valid votes / (seats to fill + 1)) + 1 = floor(23 / (3 + 1)) + 1 = floor(5.75) + 1 = 5 + 1 = 6

Step 1 and 2: First-preference votes are counted. Pears reaches the quota with 8 votes, and is therefore elected on the first count, with 2 surplus votes. All of the voters who gave first preference to Pears preferred Strawberry next, so the surplus votes are awarded to Strawberry.

No other option has reached the quota, and there are still two to elect with six options in the race, so elimination of lower-scoring options starts.

Step 3: Chocolate has the fewest votes and is eliminated. According to their only voter's next preference, this vote is transferred to Cake. No option has reached the quota, and there are still two to elect with five in the race, so elimination of options will continue next round.

Step 4: Of the remaining options, Strawberry and Chicken now are tied for the fewest votes. The tie is broken by seeing that Chicken had more first preference votes. Strawberry is eliminated. In accordance to the next preference marked on the vote cast by the voter who voted Strawberry as first preference, that vote is transferred to Orange. In accordance to the next preference marked on the two votes cast by the Pear–Strawberry–Cake voters (which had been transferred to Strawberry in step 2), the two votes are transferred to Cake. (The Cake preference had been "piggy-backed" along with the transfer to Strawberry.) Cake reaches the quota and is elected.

Cake has no surplus votes, no other option has reached the quota, and there is still one choice to select with three in the race, so the vote count proceeds, with the elimination of the least popular candidate.

Step 5: Chicken has the fewest votes and is eliminated. The Chicken voters' next preference is Chocolate but Chocolate has already been eliminated. The next usable preference is Hamburgers, so the three votes are transferred to Hamburgers.

Hamburgers is elected with 7 votes in total. Hamburgers now has a surplus vote, but this does not matter since the election is over. There are no more foods needing to be chosen - three have been chosen.

Result: The winners are Pears, Cake, and Hamburgers.

Orange ends up being neither elected nor eliminated.

STV in this case produced a higher number of effective votes - 19 votes were used to elect the successful candidates. (Only the votes for Oranges at the end were not used to select a food. The Orange voters have satisfaction of seeing their second choice - Pears - selected, even if their votes were not used to select any food.)

As well, there was general satisfaction with the choices selected. Nineteen voters saw either their first or second choice elected, although four of them did not actually have their vote used to achieve the result. Four saw their third choice elected. Fifteen voters saw their first preference chosen; eight of these 15 saw their first and third choices selected. Four others saw their second preference chosen, with one of them having their second and third choice selected.

Note that if Hamburger had received only one vote when Chicken was eliminated, it still would have won because the only other remaining candidate, Oranges, had fewer votes so would have been declared defeated in the next round. This would have left Hamburger as the last remaining candidate to fill the last open seat, even if it did not have quota.

As in many STV elections most of the candidates in winning position in the first round went on to be elected in the end. The leading front runners were Pears and Hamburgers, both of whom were elected. There was a three-way tie for third between Cake, Chicken and Oranges, Cake coming out on top in the end. Transfers seldom affect the election of more than one or two of the initial front runners and sometimes none at all.[9]

#### Compared to other systems

This result differs from the one that would have occurred if the voting system used had been non-PR, such as single non-transferable vote (SNTV), first-past-the-post (FPTP) in three districts, first-past-the-post at-large group ticket voting as used to elect members of the US electoral college, or a single-winner majoritarian system in three districts.

Single non-transferable vote would have seen a three-way tie for third place with Oranges, Cake and Chicken tied. The tie would have been resolved by the flip of a coin or the choice of an election official. Possibly Oranges or Chicken would have been determined to be the winner among the three, even though Cake was seen in the vote count process to have more general support. Under SNTV, 15 voters would have seen their first preference win - Oranges (or Chicken or Cake), Pears and Hamburgers. Eight voters would have not seen their first-preference food served. The pro-Oranges voter, if Oranges was not chosen, may have been consoled by their second choice, Pears, being served, but the others would not be served any of the foods they like, except maybe the voter who likes Strawberry and the one who likes Chocolate whose third choice, Hamburgers, was a winner. At least three voters would not be served any of their favourites.

Under first-past-the-post, the guests would have been split into three groups with one food chosen by each group based on just the most popular food in each group. The result in this case would have been dependent on how the groups are formed (gerrymandering of the groups to bias the election toward a particular result could occur). It might have been Strawberry cake, Pears and Hamburgers, but also the foods chosen might have been Pears in two groups (districts) and Hamburgers in the other. Or even just Pears alone might have won in each of the three "districts", in which case only 7 guests out of 23 would have seen their first choice served, a very unrepresentative outcome, given that three different foods could have been served.

Using FPTP, it could happen that under any three-district single-winner system, none of the groups elect Pears, if the 7 votes for it are split and in each "district" there is another food that beats it (e.g. Oranges, Hamburgers and Chicken).

Similar problems arise to a lesser degree if all districts use a majority system instead of plurality (for instance, two-round or instant-runoff voting) as at least in all districts the majority would have been quite happy, but that still leaves the minority unrepresented.

If the voters had been able to choose only one food to serve such as in the ticket voting system used in the US electoral college (first-past-the-post but without "districts"), it is likely that Pears, the choice of less than a third of the 23 party-goers, would have won, meaning Pears would be the only food served at the party. Even if they held two rounds of voting, the bare majority that prefers some other kind of fruit (Oranges, Pears, Strawberries) would have dominated all other choices.

Giving electors a single transferable vote is very different from simply having more seats to fill and giving each voter more votes to cast. Plurality block voting is such a system. Under it, each voter is given as many votes as there can be winners. This system can produce very unrepresentative results. In the example above, if every voter could vote for three options, the small majority of voters who chose a fruit could easily force all three outcomes to be fruit of some kind: an outcome that is unlikely to be more representative than simply choosing only one winner. In an extreme example, where no faction can command an absolute majority, the largest of the minority groups can force a one-outcome result by running clone candidates. For example, the seven supporters of Pears could arrange in advance to have three types of Pears included on the ballot, then vote for all three, and if no other option reaches more than 7 votes, all three foods served would be a type of Pear. The only way this could be avoided would be for those who do not want Pears to vote tactically by not choosing their preferred option, but instead whatever they consider to be the least bad outcome that is still likely to gain the required number of votes.

### Example for an election with parties

Elections with parties are conducted in very similar manner to the non-partisan STV election presented above. Parties actually play no role in STV elections – each voter marks preferences for individual candidates and his or her secondary preferences may cross party lines if so desired.

This example shows election of five members in a district. Party A runs five candidates, Party B runs three, and there is one independent in the race. The election is conducted under STV with the Hare quota, which for five seats is 20% (100% divided by five).

#### First round

Candidate  | Party  | Votes

(first preferences)

| Quota  | Elected?  | If elected: surplus votes

|
|
|
|
|

Candidate A1  |  | Party A  | 1%  | 20%  |  |
Candidate A2  |  | Party A  | 9%  |  |
Candidate A3 |  | Party A  | 25% | Yes | 5%
Candidate A4  |  | Party A  | 8%  |  |
Candidate A5  |  | Party A  | 5%  |  |
Candidate I  |  | Independent  | 7%  |  |
Candidate B1  |  | Party B  | 11%  |  |
Candidate B2  |  | Party B  | 18%  |  |
Candidate B3  |  | Party B  | 16%  |  |
TOTAL | 100% |  |  |

In the first round, the vote tally of the most popular candidate of Party A, Candidate A3, is more than quota, so they win a seat.

#### Second, third and fourth rounds

Surplus votes are distributed; the voters of Candidate A3 have put another politician from their party, Candidate A4, as their second preference, so A4 now receives Candidate A3's surplus votes. This transfer of 5 percent of the votes leaves A3 with the quota (20 percent) and A4 with 13 percent.

In the third and fourth rounds, the least popular candidates are eliminated (Candidates A1 and A5) and their votes transferred to their next preferences. Voters of Candidate A5 are not very partisan, preferring the independent candidate over the other candidates of Party A.

Candidate  | Party  | Votes  | Quota  | Elected?  | If elected: surplus votes

|
|
|
|
|

~~Candidate A1~~ |  | Party A  | 1% − 1% = 0%  | 20%  |  |
Candidate A2  |  | Party A  | 9% + 1% = 10%  |  |
Candidate A3 |  | Party A | 25% − 5% = 20%  | Yes | already elected
Candidate A4  |  | Party A  | 8% + 5% = 13%  |  |
~~Candidate A5~~ |  | Party A  | 5% − 5% = 0%  |  |
Candidate I  |  | Independent  | 7% + 5% = 12%  |  |
Candidate B1  |  | Party B  | 11%  |  |
Candidate B2  |  | Party B  | 18%  |  |
Candidate B3  |  | Party B  | 16%  |  |
TOTAL | 80% (1 already elected)  |  |  |

#### Fifth and sixth rounds

In the fifth round, Candidate A2 is eliminated with all their votes going to the candidate A4, the last remaining candidate from Party A, who is elected. The surplus votes of Candidate A4 are transferred. All the voters who helped elect Candidate A4 prefer the independent candidate to the candidates of the other party so their 3% surplus votes will go to Candidate I in the sixth round.

Candidate  | Party  | Votes  | Quota  | Elected?  | If elected: surplus votes

|
|
|
|
|

~~Candidate A1~~ |  | Party A  |  | 20%  |  |
~~Candidate A2~~ |  | Party A  | 10% − 10% = 0%  |  |
Candidate A3 |  | Party A | already elected | Yes |
Candidate A4 |  | Party A | 13% + 10% = 23% | Yes | 3%
~~Candidate A5~~ |  | Party A  |  |  |
Candidate I  |  | Independent  | 12% + 3% = 15%  |  |
Candidate B1  |  | Party B  | 11%  |  |
Candidate B2  |  | Party B  | 18%  |  |
Candidate B3  |  | Party B  | 16%  |  |
TOTAL | 80% (1 already elected)  |  |  |

#### Seventh round

There are now only four candidates remaining and three seats remaining open. The least popular candidate (Candidate B1) is declared defeated. The remaining three are declared elected regardless of whether they reached the quota.

If there is no reason to establish relative popularity of the elected members, the count ends there when the last seats are declared filled. If the ranking of the candidates is important, the votes belonging to the eliminated Candidate B1 might be transferred as per below, assuming voters' alternate preferences are marked that way.

Candidate  | Party  | Votes  | Quota  | Elected?  | If elected: surplus votes

|
|
|
|
|

~~Candidate A1~~ |  | Party A  |  | 20%  |  |
~~Candidate A2~~ |  | Party A  |  |  |
Candidate A3 |  | Party A | already elected | Yes |
Candidate A4 |  | Party A | already elected | Yes |
~~Candidate A5~~ |  | Party A  |  |  |
Candidate I |  | Independent  | 15% + 5% = 20%  | Yes |
~~Candidate B1~~ |  | Party B  | 11% − 11% = 0%  |  |
Candidate B2 |  | Party B  | 18% + 6% = 24%  | Yes |
Candidate B3 |  | Party B  | 16%  | Yes |
TOTAL | 60% (2 already elected)  |  |  |

Under STV, candidates A3, A4, I, B2 and B3 were elected.

This vote count varies from the reality of many STV systems because there were no "exhausted" non-transferable votes. In most real-life STV elections, some votes that are set to be transferred cannot be and the number of votes still in play at the end is lower than the number of votes cast and counted in the 1st round. As well, the Droop quota is usually used in real-life STV elections. With the Droop quota in effect and five seats, it would have taken 17 percent to be elected with quota, not 20 percent as under the Hare quota.

In the first round, 74 percent of votes were cast for candidates who were successful in the end. In this case, as in all STV elections, about 80 percent or more of the votes were used to actually elect someone. Only the 11 percent of votes cast in the end for B1 were not used to elect someone. The members elected in the district represent the sentiments of a large majority of the voters. Due to the diversity of members elected, each voter has someone elected who shares the party label that they voted for in the first place, even if not the individual candidate they preferred, or has seen the election of the independent candidate that they prefer.

#### Compared to other systems

This result differs from the one that would have occurred if the voting system used had been non-PR, such as single non-transferable vote (SNTV), first-past-the-post (FPTP) in five districts, first-past-the-post at-large general ticket voting (as used to elect members of the US electoral college), or a single-winner majoritarian system in five districts

This result is different from if all voters could only vote for their first preference but still all seats were filled in a single contest, which is called the single non-transferable vote. Under SNTV, the five candidates most popular when only first preferences are considered were candidates A2, A3, B1, B2 and B3. This means even though Party B's candidates had less support together, they would have received 60% of seats, and Party A only 40%. In this case, Party A overextended themselves by fielding too many candidates, but even if they had strategically nominated only three, they would not necessarily have been successful in gaining three seats instead of two seats, because one or two of their candidates might have taken the lion share of their party votes, leaving not enough votes for the other(s) to be elected. This could be addressed under SNTV if the party voters used coordinated strategic voting.

If voters could vote for five candidates (but not cast ranked votes) - ) as under the plurality block voting system, a type of multiple non-transferable vote - , Party A could have won all seats, leaving Party B and voters of the independent candidate without representation. This is because if all voters of Party A voted for all five of the Party A candidates, every Party A candidate would have been among the five candidates with the most votes and would have been declared elected. That would have meant that Party A with support of only 48 percent of voters would have had all the representation.

Under majority block voting, if voters voted along party lines, every Party A candidate would have received a vote from 48 percent of the voters, and some even up to 55% if voters of Candidate I also voted for some Party A candidates with their 4 other votes. At the same time, Party B's candidates could only get up to 52% of the votes with the same tactics. If the voters are partisan enough, the likely outcome is that party A would take all the seats although Party A took less than half the votes (minority representation) and all other votes are wasted.

In single-winner systems, whether First past the post or majoritarian, the outcome is uncertain. It likely would be that Party A with 48 percent of the votes might achieve a clean sweep of all five seats or easily Party A might take four of the five with Party B taking just one. (The first case would have been achieved by Party B votes being cracked by the district boundaries; the second case would have been achieved by Party B voters being mostly packed into just one district, leaving Party A with easy victories in the other four districts.) On the other hand, if districts were drawn in different fashion, Party A and Party B might have divided the seats in a three to two ratio. Even under certain circumstances, the independent candidate might take a seat if their supporters are sufficiently concentrated in one district.

STV election results are roughly proportional (as much as the number of seats allows) and take into account more than the first preferences of voters. However, it could be that the independent candidate would be eliminated in an early round, and that therefore the five seats would be divided among the two main parties, in a more or less fair fashion.

However, under STV (as seen in the example above), the final result may be modulated by cross-party transfers, say from a party A or B candidate to a candidate of the other party or to the independent candidate. When secondary preferences are applied, some voters who gave their first preference to a candidate from a certain party, if that person cannot be elected, might prefer an independent (or even a rival party candidate) before other candidates of their first choice's party. This means that even if it seems that the outcome over-represents or under-represents some faction (based on first preferences), the outcome actually closely adheres to a combination of the first preferences of many voters and secondary preferences of most of the other voters. Under STV, about 80 percent of voters see their vote used to elect someone they prefer (and even more than that portion see someone they prefer elected, even if their vote itself was not used to elect anyone), while under FPTP, often less than half of the votes are used to elect anyone and only the largest group in each district is represented.

Party  | Popular vote[lower-alpha 2] | STV - Hare quota  | SNTV[lower-alpha 3] | Plurality block voting[lower-alpha 4] | Party-list PR[lower-alpha 2]

|
|
|
|
|

%  | Seats  | %  | Seats  | %  | Seats  | %  | Seats  | %
| Party A  | 48%  | 2  | 40%  | 2  | 40%  | 5  | 100%  | 3  | 60%
| Party B  | 45%  | 2  | 40%  | 3  | 60%  | 0  | 0%  | 2  | 40%
| Independent  | 7%  | 1  | 20%  | 0  | 0%  | 0  | 0%  | 0  | 0%

## Related voting systems

Instant-runoff voting (IRV) is the single-winner analogue of STV. It is also called "single-winner ranked-choice voting". Its goal is representation of a majority of the voters in a district by a single official, as opposed to STV's goals of not only the representation of a majority of voters through the election of multiple officials but also of proportional representation of all the substantial voting blocks in the district.

Single non-transferable vote (SNTV) produces much the same representation as STV, without the work and complication of preferential ballots and vote transfers. Single voting in a multiple-member district produces mixed roughly proportional representation, which STV's vote transfers sometimes does not alter. (An example was the election of Edmonton, Alberta, MLAs through STV in 1930. The winners were the same under STV as would have been elected under SNTV.)

The spare vote[10] is a version of single transferable voting applied to the ranking of parties, first proposed for elections in Germany in 2013.[11] The spare vote system includes the step of transferring the votes of eliminated choices to the next-indicated choice, but it does not transfer surplus votes.

The mixed ballot transferable vote (MBTV) is a mixed version of STV, where voters may rank both candidates and parties, even both interchangeably, depending on the ballot type, but must choose at least a local (district) candidate (1st preference) and a national list (2nd preference). The list preferences are used if the vote is unused in the district election, which may use FPTP, IRV or STV rules; in the STV case, the vote is transferred to another tier in favour of the chosen party list. (This is in contrast to the mixed single vote, which is currently used in Hungary, where voters may not define a separate party-list preference and do not cast preferential votes.)

Indirect single transferable voting is a non-ranked-vote version of STV. Single voting in a multi-seat district is retained. Voters do not mark their ballots with rankings, but votes are transferred, as needed, based on the eliminated or elected candidate's pre-set instructions. This is a useful system to achieve many of the benefits of STV in districts where it is difficult to collect all the ballots in one central place to conduct STV transfers or where X voting is preferred over ranked voting due to voters' inability or disinterest in ranking candidates. Once known as the Gove system, or the schedule system of PR, it was invented by Massachusetts legislator William H. Gove of Salem and Archibald E. Dobbs of Ireland, author of Representative Reform for Ireland (1879).[12][13] (STV with group ticket Voting also conducts transfers without reference to alternate preferences marked by voters.) In 1884, Charles L. Dodgson (Lewis Caroll) argued for a proportional representation system based on multi-member districts similar to indirect STV, with each voter casting only a single vote, quotas as minimum requirements to take seats, and votes transferable by candidates through what is now called liquid democracy. The difference from "indirect STV" is that under liquid democracy, candidates and members may transfer votes after the votes are cast to build coalitions; they do not have to publish their list beforehand.

The modified d'Hondt electoral system[14] is a variant of STV, where an electoral threshold for parties is applied.

Two-vote MMP and additional member system systems may also be interpreted as a related, effectively preferential mixed system. Votes are not transferred, but a voter may vote differently for the local election and the overall party vote, with one, both or neither of those votes electing someone.[citation needed]

Sequential proportional approval voting is similar to STV by awarding seats to winners in a round-by-round basis and resulting in proportional representation but contrasts to STV by utilizing approval voting and re-weighting ballots between rounds instead of ranking candidates and transferring votes.[15]

## Terminology

When single transferable voting is used for single-winner elections, it produces a system that is formally called instant-runoff voting or alternative vote.[16]

STV uses preferential votes cast in multi-seat districts, but some use the term "preferential voting" when they are talking only about instant-runoff voting. "Preferential voting" can also refer to a broader category, ranked voting systems. In the United States, STV is sometimes also called preferential voting, choice voting, preference voting, multi-winner ranked choice voting, and proportional ranked-choice voting.

STV used for multi-winner elections is sometimes called "proportional representation through the single transferable vote", or PR-STV or STV-PR (in Scotland). "STV" usually refers to the multi-winner version, as it does in this article.

Hare–Clark is the name given to PR-STV elections in Tasmania and the Australian Capital Territory.[17][18]

## Balloting

A single transferable vote ballot paper for the electorate of Brindabella in the 2016 Australian Capital Territory general election

In STV, each voter casts just one vote although multiple seats are to be filled in the district. Voters mark first preference and can provide alternate preferences, to be used if needed.

Alternate (secondary) preferences may be required or strictly optional depending on the system used. Some systems declare a ballot spoiled if it is not marked with at least a set number or minimum number of preferences. Rules vary. Sometimes a voter is allowed to mark just their first preference (plump) and not mark any more. In Australian Capital Territory elections, voters are told they must mark at least five preferences if the ballot is to be counted.[19] Even where second and subsequent preferences are marked, in some cases they may not be consulted at all, such as if the first preference candidate is elected at the end of the count to fill the last seat.

Under full-preferential voting, a voter must rank all candidates. Under "optional preferential voting," a voter can mark as many preferences as they desire. Under semi-optional preferential voting, the voter is required to rank some number of candidates greater than one but less than the total number of candidates in the running. A vote not fully marked as per requirement under full-preferential voting or semi-optional preferential voting may be declared rejected altogether or declared rejected when, in the course of the vote count process, the vote's insufficiency has an effect on the count. Under some full-preferential voting systems, it is impossible to have many votes declared exhausted and thus, in systems that use the Droop quota and sometimes under systems that use the Hare, all, or almost all, winners will receive quota. But where there are many exhausted votes, as happens often under optional or semi-optional preferential voting systems, it is possible to have three winners in a district elected with partial quota, even if the Droop quota is used.[20][21]

In practice, the candidates' names are usually organized in columns so that voters are informed of the candidates' party affiliations or whether they are standing as independents. Voters indicate their preferences by ranking the candidates in order of preference. They usually use numbers (1, 2, 3 etc.) to show this, with 1 representing the voter's first preference.

An alternative way to mark preferences for candidates is to use columns for the voters' preference with the name of each candidate appearing in each column. The first column is used to indicate first preference. An X there goes beside the most preferred candidate. The next column is for the second preference. An X there marks the second-preference candidate, etc.

Some balloting systems allow ticket voting, where a voter simply indicates preference for a party slate, sometimes even ranking party slates, instead of marking preferences for individual candidates.

## Seat filling by quota

In most STV elections, a quota is established to ensure that all elected candidates are elected with approximately equal numbers of votes. In some STV varieties, votes are totalled, and a quota (the minimum number of votes that guarantees election) is derived. Those who are elected are the most popular, and attainment of quota is the benchmark of that popularity. Some say that the importance of quota is to set the number of votes that are surplus; that is, the number that should be transferred away from successful candidates.

A common formula sets quota as a fraction of the votes cast. A four-seat district using the Hare quota sets quota as one-fourth of the valid votes; a four-seat district using the Droop quota sets the quota as one more than one-fifth of the valid votes.[22]

In some implementations, a "uniform quota" is simply set by law - any candidate receiving that set number of votes is declared elected, with surplus transferred away. Something like this system was used in New York City from 1937 to 1947, where seats were allocated to each borough based on voter turnout. Under such a system, the number of representatives elected varied from election to election depending on voter turnout. In the 1937 New York City Council election, 26 councillors were elected; in the 1939 New York City Council election, newspapers reported that it was expected that the number of councillors would drop to 17 due to lower voter turnout.[23] Under NYC's STV, total seats on council varied: 1937 New York City Council election 25 seats, 1939 New York City Council election 21 seats, 1941 26 seats, 1943 17 seats, and 1945 23 seats.[24]

Once a quota is determined, candidates' vote tallies are consulted. If at any time a candidate achieves the quota, they are declared elected. Then if there are still unfilled seats, in some STV systems, any surplus votes (those over and above the quota) are transferred to other candidates in proportion to the next-highest preference marked on the ballots received by that candidate, if any.

Usually one or more candidates achieve quota in the first count. If there are still unfilled seats after the surplus is transferred, the count would proceed with the candidate with the fewest votes being eliminated. Their votes would be transferred to other candidates as determined by those voters' next preference, if any. Elections and eliminations, and vote transfers where applicable, continue until enough candidates are declared elected to fill the open seats or until there are only as many remaining candidates as there are unfilled seats, at which point the remaining candidates are declared elected. These last candidates may be elected without surpassing quota, but their survival until the end is taken as proof of their general acceptability by the voters.

### Election

An STV election count starts with a count of each voter's first choice, recording how many for each candidate, calculation of the total number of votes and the quota and then taking the following steps:

1. A candidate who has reached or exceeded the quota is declared elected.
2. If any such elected candidate has more votes than the quota, surplus votes are then transferred to other candidates proportionally based on their next-indicated choice on all the ballots that had been received by that candidate. There are several different ways to do this. (see § Vote transfers and quota ).
3. If there are still seats to be filled after the surplus votes of all candidates elected in the first count have been transferred, if any new candidates have been elected, their surplus votes are transferred proportionally.
4. If there are still seats to be filled after all surplus votes have been transferred, the candidate with the fewest votes is eliminated and their votes are transferred to the next candidate marked on each ballot. Candidates already elected or eliminated cannot receive votes in most systems.
5. This process repeats until either every seat has been filled by candidates surpassing quota or until there are only as many remaining candidates as there are remaining seats, at which point the remaining candidates are declared elected.

There are variations in conducting transfers (see § Vote transfers and quota).

When the number of votes transferred from the losing candidate with the fewest votes is too small to change the ordering of remaining candidates, no transfer is made or more than one candidate is eliminated simultaneously. In most systems, once a candidate has been eliminated or elected, they do not receive any more votes.[25]

### Vote transfers and quota

STV systems primarily differ in how they transfer surplus votes and in the size of the quota. For this reason, it has been suggested that STV can be considered a family of voting systems rather than a single system.

If fair results are to be produced and the number of candidates is fixed, a quota must be set such that any candidate who receives that many votes is elected. The quota, if used, must be set at a level where no more candidates can reach quota than there are seats to be filled. It cannot be so small that more candidates can be elected than the number of open seats, but the smaller it is, the fairer the result. There are several ways to specify quotas.

The Droop quota is the one most commonly used. It is generally considered to be the absolute lowest number that elects the correct number of candidates to fill the available seats, at least based on the original number of votes cast.

The Droop quota is given by the floor function formula:

votes needed to win=⌊valid votes castseats to fill+1⌋+1

The Droop quota is an extension of the majoritarian principle of requiring a 50% + 1 majority in single-winner elections under instant-runoff voting. Using Droop means 25% plus 1 is the quota in a three-seat contest because no more than three people can each have 25% of the vote + 1; using Droop means 10% of the vote + 1 is the quota in a nine-seat district because no more than nine people can each have 10% of the vote + 1, and so on.

Droop being relatively low means that the largest party, if it has the majority of votes, is likely to take the majority of the seats in a district.

The Hare quota was used in the original proposals by Thomas Hare.[26] It is larger than the Droop and sometimes ensures greater representation to less-popular parties within a district. But also, being larger than Droop, Hare presents more of an obstacle to small parties that hope to take just one seat. Being smaller than Hare, the Droop quota may give a seat to a small party that does not have the votes to take a seat under Hare.

STV minimizes wasted votes - votes cast for a candidate with no chance of winning. Surplus votes cast for a winning candidate are sometimes transferred to the voter's next choice candidate, who is also preferred by the voter. (Any vote is only used once but may be allocated to different candidates along the way until it finds its final place.) Most first-count votes cast for a candidate who wins in the end are never transferred – just the surplus votes are transferred (unless all seats are already filled). Alternate preferences are only consulted if the candidate is unpopular or elected, and not always then. Votes lie where they are when the last seats filled so even under STV not all votes are used to elect someone.[27]

There are variations in the conduct of transfers in different variations of STV, such as how to transfer surplus votes from winning candidates and whether to transfer votes to already-elected candidates.

It can happen that a vote is eligible to be transferred but cannot be because it bears no subsequent preference for any remaining candidate. In the case of transfers of surplus votes, an "exhausted" vote remains with the victorious candidates and only transferable votes (votes bearing a usable alternate preference) are used to determine the transfer of the surplus. If the number of transferable votes is less than the number of the surplus, no calculations are needed to make the transfer. Transfer of the transferable votes is done simply by reference to subsequent preference on the votes. Not all the surplus will be transferred if there are not enough transferable votes.

If the variation of STV used allows transfers to candidates already elected, when a candidate is eliminated and the next preference on the ballot shows preference for a candidate already elected, votes are transferred to already victorious candidate, forming a new surplus. The new surplus votes for the victorious candidate (transferred from the eliminated candidate) are then transferred to the next preference of the victorious candidate, as happened with their initial surplus, but just using the recently transferred votes as guide. Vote transfers from the victorious candidate to a candidate who has been eliminated are impossible, and reference must be made to the next marked preference, if any. See § Filling seats under STV for details.

A quota set lower than Droop is sometimes workable. If fractional votes are used in an STV method, the Droop quota may be modified so that the fraction is not rounded down.

Frank Britton, of the Election Ballot Services at the Electoral Reform Society, observed that the final plus one of the Droop quota is not needed; the exact quota is then simply (valid votes cast)/(seats to fill+1). Without fractional votes, the equivalent integer quota may be written:

votes needed to win=⌈valid votes castseats to fill+1⌉

So, the quota for one seat is 50 of 100 votes, not 51.[28]

In any case, in most STV elections the appearance of non-transferable votes means that the quota could be lowered significantly during the counting of the vote with no danger of having too many elected.

In STV, vote transfers are of two types - transfers of votes of eliminated candidates and transfers of surplus votes of elected candidates. The first type happens more often than the second type. Surplus votes are transferred only after a candidate is elected and then only if there are still open seats to be filled and if the transfers may affect the ranking of the remaining candidates.

### Transfers of votes of eliminated candidates

Transfers of votes of eliminated candidates is done simply, without the use of complex math. The next usable preference on the vote gives the destination for the transfer of the vote. If there is no usable preference on the ballot, the vote goes to the "exhausted" or non-transferable pile.

### Transfers of surplus votes

Various methods are used in STV systems to transfer surplus votes held by elected candidates. The transfer of surplus votes of an elected candidate may be very simply done or may be done more intricately, depending on the circumstances and the choice of the government or election officials.

It can happen that a vote is set to be transferred but cannot be because it bears no subsequent preference for any remaining candidate. In transfers of surplus votes, any non-transferable votes are left with the elected candidate.

If the number of transferable votes is less than the surplus, the transfer of surplus votes can be performed just as it is done in the case of transfer of votes of eliminated candidates, the only difference being that non-transferable votes remain with the elected candidate. They do not go to the exhausted pile. Transfer of the transferable votes is done in these cases simply by reference to the next usable preference on the vote.

In cases where the number of transferable votes is more than the surplus, a more-involved method may be used to make the transfer proportional and to ensure that the quota left with the successful candidate is proportional as well. But election officials here have a choice of using simpler methods or more involved methods.

Votes to the number of the surplus can be drawn at random from the candidate's votes. Choosing the votes at random from the pile means that each transfer should be mixed and will likely closely resemble the composition of the entire pile. (This is the system used in Cambridge, Massachusetts, city elections.) [29]

In the STV systems used in the Republic of Ireland (except Senate elections) and Malta, the next preference is examined and then surplus votes are transferred as whole votes in proportion to the proportions of votes marked for each of the other candidates. This is called the "exact method".[30] Randomness may arise from the later preferences, if any, if they have to be used later. But if they do have to be used later, choosing the votes at random to compose each transfer means that the votes that make up each transfer should carry back-up preferences in approximately true proportion to the whole.

The basic formula for how to transfer surplus votes when there are more transferable votes than the surplus to be transferred is:

transferred votes given to the next preference=(votes for next preference belonging to the original candidatetotal votes for the original candidate or total transferable votes)×surplus votes for original candidate

This can produce fractional votes, which are handled differently under different counting methods.

Transferring votes without considering later preferences may influence later transfers and such systems are sometimes thought of as being random. Alternatively, some jurisdictions use systems that break down the elected candidate's votes into many separate piles, separating the various combinations of marked preferences on the ballots, or do the same by transferring part of each vote at the transfer value rate. The vote is transferred in the form of the ballot paper, carrying its own back-up preferences with it for possible later use. This is the Gregory method.

The Gregory method (also known as Newland–Britain or Senatorial rules) eliminates randomness by examining all the preferences marked on the last parcel of ballots received by the elected candidate. The later preferences dictate how later transfers, if any, will go. Votes are transferred as fractions of votes. Gregory is in use in Northern Ireland, the Republic of Ireland (Senate elections) and in some electoral systems used in Australia.

As well, there are variants named the inclusive Gregory method (IGM) and the weighted inclusive Gregory method (WIGM).[31][32] WIGM is used in the Scottish Assembly elections.[citation needed] Unlike the ordinary Gregory method, these systems look at secondary preferences on all the votes held by the elected candidate, not just the votes that make up the last parcel of votes received.[33]

Both Gregory and earlier methods have the problem that, in some circumstances, they do not treat all votes equally. For this reason, Meek's method, Warren's method and the Wright system were invented.

Meek, in 1969,[34] was the first to realize that computers make it possible to count votes in a way that is conceptually simpler and closer to the original concept of STV. One advantage of Meek's method is that the quota is adjusted at each stage of counting when the number of votes decreases because some become non-transferable. Meek also considered a variant of his system which allows for equal preferences to be expressed.[35] This has subsequently (since 1998) been used by the John Muir Trust for electing its trustees.[36]

## History

Carl Andræ

### Origin

The concept of transferable voting was first proposed by Thomas Wright Hill in 1819. The system remained unused in public elections until 1855, when Carl Andræ proposed a transferable vote system for elections in Denmark, and his system was used in 1856 to elect the Rigsraad and from 1866 it was also adapted for indirect elections to the second chamber, the Landsting, until 1915.[37]

Thomas Hare

Although he was not the first to propose transferable votes, the British barrister Thomas Hare is generally credited with the conception of STV, and he may have independently developed the idea in 1857. Hare's view was that STV should be a means of "making the exercise of the suffrage a step in the elevation of the individual character, whether it be found in the majority or the minority." In Hare's original system, he further proposed that electors should have the opportunity of discovering which candidate their vote had ultimately counted for, to improve their personal connection with voting.[26] At the time of Hare's original proposal, the UK did not use the secret ballot, so not only could the voter determine the ultimate role of their vote in the election, the elected MPs would have been able to determine who had voted for them. As Hare envisaged that the whole House of Commons be elected "at large" this would have replaced geographical constituencies with what Hare called "constituencies of interest" – those people who had actually voted for each MP.

In the 1890s in Australia, Catherine Helen Spence amended Hare's proposal by adding multi-member districts instead of at-large voting. Instead of a single member being said to represent a whole district of varied sentiment, as under first-past-the-post, under STV multiple members represent the range of sentiments of the district, each one representing a "constituency of interest" made up of only those who voted for them.[38]

In modern elections, held by secret ballot, a voter may discover how their vote was distributed by viewing detailed election results (or at least trace the routes along which their vote, or other votes identical to the one they cast, may have been transferred and see to whom it may have been used to elect). This is particularly easy to do using Meek's method, where only the final weightings of each candidate need to be published. However, the elected member cannot verify who their supporters are.

The political essayist John Stuart Mill was a friend of Hare's and an early proponent of STV, praising it at length in his essay Considerations on Representative Government, in which he writes: "Of all modes in which a national representation can possibly be constituted, this one affords the best security for the intellectual qualifications desirable in the representatives. At present... the only persons who can get elected are those who possess local influence, or make their way by lavish expenditure...."[39] His contemporary, Walter Bagehot, also praised the Hare system for allowing everyone to elect an MP, even ideological minorities, but also argued that the Hare system would create more problems than it solved: "[the Hare system] is inconsistent with the extrinsic independence as well as the inherent moderation of a Parliament – two of the conditions we have seen, are essential to the bare possibility of parliamentary government."[40]

Advocacy of STV spread throughout the British Empire, leading it to be sometimes known as British Proportional Representation. In 1896, Andrew Inglis Clark was successful in persuading the Tasmanian House of Assembly to be the first parliament in the world elected by what became known as the Hare-Clark electoral system, named after himself and Thomas Hare. H. G. Wells was a strong advocate, calling it "Proportional Representation".[41] The HG Wells formula for scientific voting, repeated, over many years, in his PR writings, to avoid misunderstanding, is Proportional Representation by the single transferable vote in large constituencies.[42]

STV in large constituencies and multiple-member districts permits an approach to the Hare-Mill-Wells ideal of mirror representation. The UK National Health Service used to elect, through the first-past-the-post system in local or regional elections, only white male general practitioners to the General Medical Council. In 1979, the UK National Health Service used STV to proportionally elect women and immigrant GPs, and specialists, to the General Medical Council.[43]

### Australia

Australian Senate ballot paper used in Victoria for 2016

Tasmania first used STV for election of members of the Tasmanian House of Assembly from 1896 to 1902. In 1909, it began to be used on a permanent basis for Assembly elections. (Instant-runoff voting was used for elections to the Tasmania Legislative Council (its upper house), with some of the members elected through STV prior to 1946.)

In 1948, single transferable vote proportional representation on a state-by-state basis became the method for electing Senators to the Australian Senate. This change has led to the rise of a number of minor parties such as the Democratic Labor Party, Australian Democrats and Australian Greens who have taken advantage of this system to achieve parliamentary representation and the balance of power. From the 1984 election, group ticket voting was introduced to reduce a high rate of informal voting but in 2016, group tickets were abolished to avoid undue influence of preference deals amongst parties that were seen as distorting election results[44] and a form of optional preferential voting was introduced.

Beginning in the 1970s, Australian states began to reform their upper houses to introduce proportional representation in line with the Federal Senate. The first was the South Australian Legislative Council in 1973, which initially used a party list system (replaced with STV in 1982),[45] followed by the single transferable vote being introduced for the New South Wales Legislative Council in 1978,[46] the Western Australian Legislative Council in 1987[47] and the Victorian Legislative Council in 2003.[48] The single transferable vote was also introduced for the elections to the Australian Capital Territory Legislative Assembly after a 1992 referendum.[49]

The term STV in Australia refers to the Senate electoral system, a variant of Hare-Clark characterized by the "above the line" group voting ticket, a party list option. It is used in the Australian upper house, the Senate, most state upper houses, the Tasmanian lower house and the Capital Territory assembly. There is a compulsory number of preferences for a vote for candidates (below-the-line) to be valid: for the Senate a minimum of 90% of candidates must be scored, in 2013 in New South Wales that meant writing 99 preferences on the ballot.[50] Therefore, 95% and more of voters use the above-the-line option, making the system, in all but name, a party list system.[51][52][53] Parties determine the order in which candidates are elected and also control transfers to other lists and this has led to anomalies: preference deals between parties, and "micro parties" which rely entirely on these deals. Additionally, independent candidates are unelectable unless they form, or join, a group above-the-line.[54][55] Concerning the development of STV in Australia researchers have observed: "... we see real evidence of the extent to which Australian politicians, particularly at national levels, are prone to fiddle with the electoral system".[56]: 86

As a result of a parliamentary commission investigating the 2013 election, from 2016 the system has been considerably reformed (see 2016 Australian federal election), with group voting tickets (GVTs) abolished and voters no longer required to fill all boxes.

In 2023, the single transferable vote was also chosen as the electoral method in South Australia for the state's First Nation's Voice to Parliament.[57]

### Canada

STV was used to elect legislators in two Canadian provinces between 1920 and 1955. The cities of Edmonton and Calgary elected their MLAs through STV from 1924 to 1956, when the Alberta provincial government changed those elections to use the first-past-the-post system. The city of Winnipeg elected its MLAs through STV from 1920 to 1955, when the Manitoba provincial government changed those elections to use first-past-the-post.[27]

Less well known is STV use at the municipal level in western Canada. Calgary and Winnipeg used STV for more than 50 years before city elections were changed to use the first-past-the-post system. Nineteen other municipalities, including the capital cities of the other three western provinces, also used STV For elections in about 100 elections during the 1918 to 1931 period.[58]

In British Columbia, Canada, a type of STV called BC-STV was recommended for provincial elections by the British Columbia Citizens' Assembly on Electoral Reform in 2004. In a 2005 provincial referendum, it received 58 percent support and achieved a simple majority in 77 of 79 electoral districts. It was rejected for falling short of the 60 percent threshold that had been set by the BC Liberal provincial government.[59] In a second referendum, on 12 May 2009, BC-STV was defeated 61 percent to 39 percent.

### United States

In the United States, the Proportional Representation League was founded in 1893 to promote STV, and their efforts resulted in its adoption by many city councils in the first half of the 20th century. More than twenty cities have used STV, including Cleveland, Cincinnati and New York City. As of January 2010, it is used to elect the city council and school committee in Cambridge, Massachusetts, the park board in Minneapolis, Minnesota, and the board of assessors in Arden, Delaware. STV has also been adopted for student government elections at several American universities, including Carnegie Mellon,[60][61] MIT, Oberlin, Reed, UC Berkeley, UC Davis, Vassar, UCLA, Whitman, and UT Austin. The Fair Representation Act, introduced in Congress in June 2017, would have established STV for US House elections starting in 2022.[62]

## List of users

STV has seen its widest adoption in the English-speaking world.

### National legislatures

The table below lists countries that use STV to fill a nationally elected legislative body by direct elections.

Country  | Body  | Type of body  | Quota  | Constituencies  | District magnitude | Governmental system  | Since  | Notes

|
|
|
|
|
|
|
|

Australia  | Senate  | Upper house of legislature  | Droop quota  | States and territories of Australia  |

* 6 (for each state)
* 2 (for the ACT and NT)

| Parliamentary system | 1948[lower-alpha 5] | With the option of using a group voting ticket from 1983 until 2016

At a full senate election triggered by a double dissolution, all 12 senators for each state are elected.

Ireland  | Dáil Éireann  | Lower house of legislature  | Droop quota  | Constituencies  | 3–5  | Parliamentary system | 1921[lower-alpha 6] | Constituencies have a constitutionally mandated minimum magnitude of 3, and a legally mandated maximum magnitude of 5
Malta  | House of Representatives  | Unicameral legislature  | Hagenbach-Bischoff quota  | Constituencies  | 5  | Parliamentary system | 1921  | If elected members are from only two parties, the party with the highest first-preference vote is allocated additional members to reach majority if necessary

### Other bodies

Country  | Body/region  | Notes

|
|

Australia  | Australian Capital Territory  | Legislative Assembly elections (since 1992)
Norfolk Island | Local government elections (since 2016)
Northern Territory  | Local government elections (since 2011)
New South Wales  |

* Legislative Council elections (since 1978 – with the option of using a group voting ticket until 2003)
* Local government elections (since 2012)

South Australia  |

* Legislative Council elections (since 1982 – with the option of using a group voting ticket from 1985 until 2017)
* Local government elections (since 1999)
* Local First Nations Voice elections (since 2023)

Tasmania  |

* House of Assembly elections (since 1896)
* Local government elections (since 1993)

Victoria  |

* Legislative Council elections (since 2003 – with the option of using a group voting ticket)
* Local government elections (since 2003)

Western Australia  |

* Legislative Council elections (since 1987 – with the option of using a group voting ticket until 2021)
* Local government elections (since 2023)

Ireland  | Ireland's delegation to the European Parliament  | Since 1979
Local government elections  | Since 1920[lower-alpha 7]
Malta  | Malta's delegation to the European Parliament  |
Local government elections  | Local councils established in 1993. 2015 reform abolished staggered terms and half-council elections. Range of district magnitude: 5 (Mosta) to 13 (Birkirkara).[63][64]
New Zealand[65] | Local government elections  |

* Regional council elections: Wellington Regional Council
* Unitary authority elections: Marlborough District Council
* Territorial authority elections:
* Dunedin City Council, Kaipara District Council, Kāpiti Coast District Council, New Plymouth District Council, Palmerston North City Council, Porirua City Council, Ruapehu District Council, Tauranga City Council, Wellington City Council[66]

* Later additions – Hamilton City Council (2020);[67] in 2022, this number further increased.[68]

* District health board elections: all 20 boards (until the district health boards were replaced in 2021)

United Kingdom  | Northern Ireland  |

* Northern Ireland Assembly elections (since 1998)[lower-alpha 8]
* Local government elections

Scotland  | Local government elections (since May 2007)[69] (districts of 1 to 5 members)[70]
United States  | Local government elections  |

* City elections in Cambridge, Massachusetts (multi-member, at-large district), Eastpointe, Michigan, Palm Desert, California, Albany (NY), St. Paul (MN), St. Louis Park (MN), and Portland, Maine (multi-member, at-large district).[71][72]
* At-large municipal board seats[73] in Minneapolis, Minnesota
* Historically, during the Progressive Era, in 21 other cities between 1915 and 1960, including New York City for New York City Council from 1937 to 1947 (multi-winner districts)[74][75][76]

#### Indirect

Country  | Body/region  | Notes

|
|

Ireland  | Seanad general elections  | Upper house, since 1925
India  | Rajya Sabha  |
Vidhan Parishad (in few states)  |
Nepal  | National Assembly  | Upper house elections by provinces and local assemblies since 2018
Pakistan  | Senate  | Indirect by provincial assemblies and direct by Federally Administered Tribal Areas)

### Historic use of STV for election of legislative bodies

Country  | Body/region  | Direct/indirect  | From  | Until  | Replaced by  | Notes

|
|
|
|
|
|

Estonian SSR  | Supreme Soviet  | Direct  | 1990  | 1992  | Party-list proportional representation[77]
Canada  | Provincial legislative assemblies of Alberta and Manitoba  | Direct  | 1920s  | 1950s  | First-past-the-post voting[78]
Ireland  | Seanad  | Direct (19 elected in single country-wide contest)[79] | 1925  | 1925  | Indirect elections, university elections  |

## Benefits

Advocates[who?] for STV argue it is an improvement over winner-take-all non-proportional voting systems such as first-past-the-post, where vote splits commonly result in a majority of voters electing no one and the successful candidate having support from just a minority of the district voters. STV prevents in most cases one party taking all the seats and in its thinning out of the candidates in the field prevents the election of an extreme candidate or party if it does not have enough overall general appeal.

STV is the system of choice of the Proportional Representation Society of Australia (which calls it quota-preferential proportional representation),[80] the Electoral Reform Society in the United Kingdom[81] and FairVote in the United States (which refers to STV as proportional ranked choice voting[82] and instant-runoff voting as "ranked choice voting",[83] although there are other preferential voting methods that use ranked-choice ballots).

## Issues

### Degree of proportionality

The degree of proportionality of STV election results depends directly on the district magnitude (i.e. the number of seats in each district). While Ireland originally had a median district magnitude of five (ranging from three to nine) in 1923, successive governments lowered this. Systematically lowering the number of representatives from a given district directly benefits larger parties at the expense of smaller ones.

Supposing that the Droop quota is used: in a nine-seat district, the quota or threshold is 10% (plus one vote); in a three-seat district, it would be 25% (plus one vote). This electoral threshold is significantly higher than for most party-list PRs.

A parliamentary committee in 2010 discussed the "increasing trend towards the creation of three-seat constituencies in Ireland" and recommended not less than four-seaters, except where the geographic size of such a constituency would be disproportionately large.[84]

STV provides proportionality by transferring votes to minimize waste, and therefore also minimizes the number of unrepresented or disenfranchised voters.

### Difficulty of implementation

A frequent concern about STV is its complexity compared with single-mark voting methods, such as plurality voting or party-list proportional representation. Before the advent of computers, this complexity made ballot-counting more difficult than in other methods, though Winnipeg used it to elect ten MLAs in seven elections (1920–1945).[85]

The algorithm is complicated, particularly if Gregory or another fractional-vote method is used. In large elections with many candidates, a computer may be required. (This is because after several rounds of counting, there may be many different categories of previously transferred votes, each with a different permutation of early preferences and thus each with a different carried-forward weighting, all of which have to be kept track of.)

### Role of political parties

STV differs from other proportional representation systems in that candidates of one party can be elected on transfers from voters for other parties. Hence, STV may reduce the role of political parties in the electoral process and corresponding partisanship in the resulting government. A district only needs to have four members to be proportional for the major parties, but may under-represent smaller parties, even though they may well be more likely to be elected under STV than under first-past-the-post.

### By-elections

As STV is a multi-member system, filling vacancies between elections can be problematic, and a variety of methods have been devised:

* The countback method is used in the Australian Capital Territory, Tasmania, Victoria, Malta, and Cambridge, Massachusetts. Casual vacancies can be filled by re-examining the ballot papers data from the previous election.[86]
* Another option is to have a head official or remaining members of the elected body appoint a new member to fulfill the vacancy.
* A third way to fill a vacancy is to hold a single-winner by-election (effectively instant-runoff voting); this allows each party to choose a new candidate and all voters to participate. This is the method used in the Republic of Ireland in national elections, and in Scotland's local elections.
* Yet another option is to allow the party of the vacant member to nominate a successor, possibly subject to the approval of the voting population or the rest of the government. This is the method used in the Republic of Ireland in local elections.[87]
* Another possibility is to have the candidates themselves create an ordered list of successors before leaving their seats. In the European Parliament, a departing member from the Republic of Ireland or Northern Ireland is replaced with the top eligible name from a replacement list submitted by the candidate at the time of the original election. This method was also used in the Northern Ireland Assembly, until 2009, when the practice was changed to allow political parties to nominate new MLAs in the event of vacancies. Independent MLAs may still draw up lists of potential replacements.[88]
* For its 2009 European elections, Malta introduced a one-off policy to elect the candidate eliminated last to fill the prospective vacancy for the extra seat that arose from the Lisbon Treaty.

### Tactics

If there are not enough candidates to represent one of the priorities the electorate vote for (such as a party), all of them may be elected in the early stages, with votes being transferred to candidates with other views. On the other hand, putting up too many candidates might result in first-preference votes being spread too thinly among them, and consequently several potential winners with broad second-preference appeal may be eliminated before others are elected and their second-preference votes distributed. In practice, the majority of voters express preference for candidates from the same party in order,[citation needed] which minimizes the impact of this potential effect of STV.

The outcome of voting under STV is proportional within a single election to the collective preference of voters, assuming voters have ranked their real preferences. Due to other voting mechanisms usually used in conjunction with STV, such as a district or constituency system, an election by STV does not guarantee proportionality across all districts. If proportionality is measured by looking at first preference votes, the final result may vary from that proportionality due to some votes being transferred from one party to another during the vote count procedure.

Accordingly, in many elections, each party has their vote spread over the party's slate (if the party runs multiple candidates so that all the large parties' votes are spread somewhat equally), and candidates of popular parties are mostly all more popular than candidates of less-popular parties. This happened in Cavan-Monaghan in the 2020 Irish general election, where Labour, PBP, Green and Aontu parties were the least popular. Their candidates were four of the five least-popular candidates in the first count and were eliminated quickly. SF, FG and FF parties were more popular - their candidates took the five seats - and candidates of those parties were already leading in the first count.[89]

A number of methods of tactical or strategic voting exist that can be used in STV elections but much less so than with first-past-the-post elections. In STV elections, most constituencies will be marginal, at least with regard to the allocation of a final seat. Manipulating STV requires knowledge of the contents of all the ballots, effectively only being possible after the ballots are counted; and discovering the correct votes to cast to manipulate the outcome strategically is NP-complete.[90]

The difficulty of manipulating results under STV is credited with why it is chosen for use in part of the process of allocating the Academy Awards. As part of the process of selecting winners for the Academy Awards, STV is used to choose nominees within each category. The Academy of Motion Picture Arts and Sciences claims that STV is preferred because "[a]lthough there are always instances in which an election procedure can be manipulated, an advantage of STV procedures is that the computations are too complex to be manipulated by a voter attempting to rank competitors of its most preferred candidate at the bottom of its preference list."[91]

While STV generally does not satisfy the Condorcet criterion, Condorcet method variants like Schulze STV and CPO-STV do.

### Elector confusion

Critics[who?] contend that some voters find the mechanisms behind STV difficult to understand, but this does not make it more difficult for voters to rank the list of candidates in order of preference on an STV ballot paper (see § Voting).[92]

STV systems vary, both in ballot design and in whether or not voters are obliged to provide a full list of preferences.

In jurisdictions such as Malta, Republic of Ireland and Northern Ireland, voters may rank as many or as few candidates as they wish. Consequently, voters sometimes, for example, rank only the candidates of a single party, or of their most preferred parties. Voters who do not fully understand the system may only vote for as many candidates as the instruction on the ballot gives before "and so on",[93] and may even "bullet vote", only expressing a first preference, or indicate a first preference for multiple candidates, especially when both STV and plurality are being used in concurrent elections.[94]

Allowing voters to rank only as many candidates as they wish grants them greater freedom, but can also lead to some voters ranking so few candidates that their vote eventually becomes exhausted – that is, at a certain point during the count, it can no longer be transferred and influence the result. Some are non-transferable because the choices marked have already been elected, so the voter may be pleased with the overall election result even though their first preference was not elected and their vote itself was not used to elect anyone. Even if a voter marks many preferences, the vote may still be found to be non-transferable, if at any point the vote needs to be transferred and all the preferences ranked lower have already been eliminated or elected. But the number of non-transferable votes is fewer than the number of ignored votes under first-past-the-post and the number of effective votes, votes actually used to elect someone, is higher than under all but the most landslide first-past-the-post election contests.

The STV method may be confusing to some and may cause some people to vote incorrectly with respect to their actual preferences.

STV ballots can also be long; having multiple pages increases the chances of people not marking multiple preferences and thus missing later opportunities to have their vote transferred. After a vote is transferred twice, is at the end of the count and three candidates remain in the running for the last seat, the voter may have little interest in the choice. None of them were the voter's first choice, nor their second or third preference. And perhaps the voter has already seen one or two of their earlier choices already elected. Many votes up for transfer are found to be non-transferable in the last vote transfers. One to three members at the end are often elected with partial quotas, due to the number of exhausted votes. In STV elections, a majority of votes are used to elect the members who are elected.

### Other

Some opponents[who?] argue that larger, multi-seat districts would require more campaign funds to reach the voters. Proponents[who?] argue that STV can lower campaign costs because like-minded candidates can share some expenses. Proponents reason that negative advertising is disincentivized in such a system, as its effect is diluted among a larger pool of candidates.

In addition, candidates do not have to secure the support of the largest voting block to be elected as under FPTP. STV ensures that each substantial group gets at least one seat, allowing candidates to focus campaign spending primarily on supportive voters. Under STV, it is not necessary to be the most popular candidate in the district to be elected; it is only necessary to have quota (or survive to the end when the remaining candidates are declared elected). To have quota, you do not need support from across the district necessarily. If a corner of the district has a quota worth of votes and the voters there support a candidate, that candidate will be elected and there is nothing the others elsewhere in the district can do about it. So, at least theoretically, you would not need to campaign across the district.[95]

The larger, multi-member constituencies can result in less, rather than more, representation of local communities within the electoral district. The representatives could potentially all be from one part of the region, leaving other communities without representation.

Furthermore, STV requires multi-member districts (MMDs). It is thus impossible to use MMDs in the Scottish Highlands to elect member of the UK Parliament because only one member is elected in that area.[96] To create an MMD in a sparsely-settled area, an electoral district would have to cover a large area just to capture the required population to be represented by multiple members. There can be a greater disconnect between the voter, or community, and their representatives. If areas with low population density were using multi-member districts to elect the relatively few high-level members of Parliament in Scotland or of the UK Parliament, constituencies could become so large as to seem to be impractical.[97] However, Scotland successfully uses multiple-member regions in its Scottish Parliament elections and STV in its Local Authority elections. The large number of Local Authority or Scottish Parliament members allows the creation of MMDs without having each district cover too large an area.[98] Meanwhile, MMDs even of immense size can be used successfully. In New South Wales, Australia, the whole state elects 21 members of the upper house in one single STV contest and has done so since 1991.[99]

## Analysis of results

Academic analysis of voting systems such as STV generally centres on the voting system criteria that they pass. No preference voting system satisfies all the criteria in Arrow's impossibility theorem: in particular, STV fails to achieve independence of irrelevant alternatives (like most other vote-based ordering systems) and monotonicity.[100]

### Migration of preferences

The relative performance of political parties in STV systems is sometimes analysed in a different fashion from that used in other electoral schemes. For example, seeing which candidates are declared elected on first-preference votes alone in the 2012 Scottish local elections, where 1223 members were elected, can be shown as follows:

2012 Scottish local elections[101] Party | Total elected | Elected on 1st prefs alone

|
|

Total | % | % (2007)
115 | 46 | 40 | 41
394 | 199 | 51 | 37
71 | 20 | 28 | 22
425 | 185 | 44 | 57
14 | 1 | 7 | –
200 | 79 | 40 | 32
| Other  | 4 | 2 | 50 | 14
Totals | 1,223 | 532 | 44 | 40

The data can also be analysed to find the proportion of voters who express only a single preference,[102] or those who express a minimum number of preferences,[103] to assess party strength. Where parties nominate multiple candidates in an electoral district, analysis can also be done to assess their relative strength.[104]

Other useful information can be found by analysing terminal transfers—i.e., when the votes of a candidate are transferred and no other candidate from that party remains in the count[103]—especially with respect to the first instance in which that occurs:

Average first terminal transfer rates (2012)[105] Transferred from | % non-transferable | % transferred to

|
|

Con | Lab | LD | SNP | Ind/Other
34 | – | 8 | 32 | 8 | 18
48 | 6 | – | 13 | 17 | 17
23 | 22 | 20 | – | 16 | 19
44 | 6 | 18 | 14 | – | 18
20 | 5 | 19 | 20 | 18 | 17

The transfers of votes under STV mean that candidates who did well on first-preference votes in the first count (but not well enough to be immediately declared elected) may not be elected in the end, and those who did poorly on the first count may be elected in the end. This is due to transfers made according to second and later preferences. This can also be analysed, again using the 1223 members elected in the Scottish local elections. Some of the leading candidates in the first count were not elected but, comparing the number to the total number of members elected in these elections, the successful candidates were mostly set in the first count (through the simple mechanics of single voting in multi-member districts), before any vote transfers are done. Only about ten percent or less of the front runners in the first count were not elected in the end.

Only 68 of the elected members, of the overall 1,223 successful candidates, were not already in a winning position in the first count, thus showing that vote transfers merely put a polish on the first-count ranking of candidates established through single voting in multi-seat districts.

Candidates not in a winning position on 1st preference who secured election, by party (2012)[106] Political party | Elected though not in top 3 or 4 | Not elected though in top 3 or 4 | Net gain/loss

|
|
|

2012 | 2007
1 | 16 | −15 | −24
21 | 8 | +13 | −17
4 | 3 | +1 | +29
19 | 29 | −10 | –
1 | 1 | – | +1
22 | 9 | +13 | +8
| Other  | – | 2 | −2 | +3

Thus, of 1223 seats filled in 2012, only 68 were filled by candidates who were not in top three or four spots in the first count. Therefore, transfers changed the outcome of only about 6 percent of the spots. Single non-transferable vote would have provided the same results in a great majority of cases.

### Effective votes

In the 2020 Irish election where members of Dáil Éireann, known as TDs (Dáil deputies), were elected by single transferable vote from 39 constituencies, each with between three and five seats, members were elected under STV with about the same number of votes and a large proportion of votes cast in each district were used to actually elect someone.

Most elected members were elected by achieving the quota. Thus they were elected by receiving approximately the same number of votes. The few elected without quota received a number of votes close to quota as well.[89] A large proportion of the votes were used to elect someone, with relatively few being wasted. Perhaps one full quota or less is not used to elect someone.[89]

In Cambridge, Massachusetts, under STV in 2021, 90 percent of voters saw their vote help to elect a candidate, more than 65 percent of voters saw their first choice candidate elected, and more than 95 percent of voters saw at least one of their top three choices elected.[107]

## See also

* Tally (voting)
* None of the above
* Approval voting
* Single non-transferable vote
* Table of voting systems by country
* Voting matters, a journal concerned with the technical aspects of STV

## Notes

1. ↑ FairVote, the leading advocacy organization for STV in American elections, exclusively uses the term P-RCV.
2. ↑ 2.0 2.1 Based on 1st preference candidates
3. ↑ Based on single vote cast for 1st preferences, no tactical voting
4. ↑ Likely outcome based on first preferences and assuming most voters also cast their second and third votes for candidates of the same party
5. ↑ STV was previously used to elect the Tasmanian members of both the Senate and the House of Representatives in the inaugural 1901 federal election.
6. ↑ STV was previously used for the Dublin University constituency in the 1918 general election.
7. ↑ STV was previously used for the 1919 special election for Sligo Corporation.
8. ↑ STV was previously used for the 1921 and 1925 elections to the Northern Ireland parliament.

## References

1. ↑ Tideman, Nicolaus (March 1995). "The Single Transferable Vote" (in en). Journal of Economic Perspectives 9 (1): 27–38. doi:10.1257/jep.9.1.27. ISSN 0895-3309. https://www.aeaweb.org/articles?id=10.1257/jep.9.1.27.
2. ↑ "Single Transferable Vote". Electoral Reform Society. http://www.electoral-reform.org.uk/single-transferable-vote.
3. ↑ Electoral Commission of Malta (gov.mt)
4. ↑ constituency-review-report-2023.pdf (amazonaws.com), p. 5
5. ↑ https://electoral.gov.mt/ElectionResults/LocalCouncil?v=808. (Birkirkara elects 13 members)
6. ↑ "Mayor and Councillors" (in mt). https://localgovernmentdivision.gov.mt/en/lc/Mosta/Pages/The-Local-Council/Mayor-and-Councillors.aspx.
7. ↑ "Scotland council elections 2022: A really simple guide" (in en-GB). 2022-03-28. https://www.bbc.com/news/uk-scotland-scotland-politics-60764222.
8. ↑ Which quota?. http://www.prsa.org.au/quota_droop_vs_hare_voting_in_democracies_lakeman_&_lambert.pdf. Retrieved 27 February 2023.
9. ↑ A Report on Alberta Elections. Alberta Legislature. 1982. pp. 38-81.
10. ↑ Björn Benken: What is Dual Level Voting?, retrieved on 14 May 2022.
11. ↑ German state parliament faction of the pirates in Schleswig-Holstein: Alternativen zum Gesetzentwurf aus Drucksache 18/385, 4 November 2013, in German
12. ↑ Eisner, Jason (2015). ﻿Indirect STV Election: A Voting System for South Africa﻿ (Report). https://www.cs.jhu.edu/~jason/papers/eisner.istv91.pdf. Retrieved 27 February 2023.
13. ↑ Hoag, Effective Voting (1914)
14. ↑ Australian Capital Territory Electoral Commission, Modified d'Hondt Electoral System
15. ↑ Brams, S. J.; Kilgour, D. M.; Potthoff, R. F. (2019). "Multiwinner approval voting: an apportionment approach". Public Choice 178 (67–93): 67–93. doi:10.1007/s11127-018-0609-2. https://doi.org/10.1007/s11127-018-0609-2.
16. ↑ "How RCV Works". https://www.fairvote.org/how_rcv_works.
17. ↑ Terry Newman, Hare-Clark in Tasmania
18. ↑ George Howatt, Democratic Representation under the Hare-Clark System – The Need for Seven-Member Electorates
19. ↑ "the instructions on the ballot papers ask electors to show preferences for at least as many candidates as there are vacancies" https://www.elections.act.gov.au/education/act_electoral_commission_fact_sheets/fact_sheets_-_general_html/elections_act_factsheet_ballot_papers
20. ↑ Farrell and McAllister,The Australian Electoral System, p. 57-60
21. ↑ A Report on Alberta Elections (1948 election in Calgary)
22. ↑ Sandford Fleming, Essays on the Rectification of Parliament (1892)
23. ↑ "Proportional Representation in New York City, 1936-1947". https://fairvote.org/report/proportion_representation_in_new_york_city_1936_1947/.
24. ↑ https://repository.library.georgetown.edu/bitstream/handle/10822/1044631/Santucci_georgetown_0076D_13763.pdf?sequence=1&isAllowed=y)
25. ↑ Hoag and Hallett, Proportional Representation, p. 88
26. ↑ 26.0 26.1 Lambert & Lakeman 1955, p. 245.
27. ↑ 27.0 27.1 A Report on Alberta Elections (1982)
28. ↑ Newland 1984.
29. ↑ https://www.opavote.com/methods/cambridge-stv-rules
30. ↑ Hoag, Clarence Gilbert; Hallett, George Hervey (1926). Proportional representation. New York: The Macmillan Company.
31. ↑ Hill, Wichmann & Woodall 1987.
32. ↑ Gilmour, James (March 2021). "Review of some aspects the Single Transferable Voting system for local elections in Wales". https://www.researchgate.net/publication/350495590.
33. ↑ https://citizensassembly.arts.ubc.ca/resources/TechReport(full).pdf
34. ↑ Meek 1994a.
35. ↑ Meek 1994b.
36. ↑ "Examples of STV elections". Heriot-Watt University. http://www.macs.hw.ac.uk/~denis/stv_elections.
37. ↑ "Andræs metode | Gyldendal – Den Store Danske". http://denstoredanske.dk/Samfund,_jura_og_politik/Samfund/Valgteorier_og_valgmetoder/Andræs_metode.
38. ↑ Farrell and McAllister, The Australian Electoral System, p. 26
39. ↑ Mill 1861, p. 144.
40. ↑ Bagehot 1894,  p. 158.
41. ↑ Wells 1918, pp. 121–129.
42. ↑ HG Wells 1916: The Elements of Reconstruction. HG Wells 1918: In The Fourth Year.
43. ↑ Electoral Reform Society, 1979 audit, which records the gratitude of the British medical profession for introducing STV.
44. ↑ Anderson, Stephanie (25 April 2016). "Senate Voting Changes Explained in Australian Electoral Commission Advertisements". ABC News. http://www.abc.net.au/news/2016-04-26/aec-advertising-campaign-on-way-senators-are-elected/7356308.
45. ↑ Dunstan, Don (1981). Felicia: The political memoirs of Don Dunstan. Griffin Press Limited. pp. 214–215. ISBN 0333338154.
46. ↑ "Role and History of the Legislative Assembly". Parliament of New South Wales. http://www.parliament.nsw.gov.au/prod/web/common.nsf/key/LARole.
47. ↑ Electoral Reform expected to alter balance of power, The Australian, 11 June 1987, p.5
48. ↑ Constitution (Parliamentary Reform) Act 2003
49. ↑ "1992 Referendum". 6 January 2015. https://www.elections.act.gov.au/elections_and_voting/act_legislative_assembly_referendums/1992_referendum.
50. ↑ "The Hare-Clark System of Proportional Representation". Melbourne: Proportional Representation Society of Australia. http://www.prsa.org.au/hareclar.htm.
51. ↑ "Above the line voting". Perth: University of Western Australia. http://elections.uwa.edu.au/glossaryc.lasso?CondensedGlossary=abovethelinevoting.
52. ↑ "Glossary of Election Terms". Sydney: Australian Broadcasting Corporation. http://www.abc.net.au/elections/federal/2010/guide/glossary.htm#group_voting_ticket.
53. ↑ Hill, I.D. (November 2000). "How to ruin STV". Voting Matters (12). http://www.votingmatters.org.uk/ISSUE12/P7.htm. Retrieved 10 August 2013.
54. ↑ Green, Anthony (20 April 2005). "Above or below the line? Managing preference votes". Australia: On Line Opinion. http://www.onlineopinion.com.au/view.asp?article=3359&page=0.
55. ↑ Terry, Chris (5 April 2012). "Serving up a dog's breakfast". London: Electoral Reform Society. http://devers2.speedster-it.com/blog/serving-up-a-dogs-breakfast.
56. ↑ David M. Farrell; Ian McAllister (2006). The Australian Electoral System: Origins, Variations, and Consequences. Sydney: UNSW Press. ISBN 978-0868408583.
57. ↑ "First Nations Voice Act 2023 (SA) - Schedule 1 — Rules of election for Local First Nations Voices - Section 13". https://www.legislation.sa.gov.au/__legislation/lz/v/a/2023/first nations voice act 2023_9/2023.9.un.pdf.
58. ↑ Monto, When Canada Had Proportional Representation
59. ↑ "Report of the Chief Electoral Office". https://www.elections.bc.ca/docs/rpt/2005-CEOreportRefOnElectoralReform.pdf.
60. ↑ "Elect@CMU | About single transferable voting". https://stugov.andrew.cmu.edu/elections/statics/aboutstv.
61. ↑ Gund, Devin. "CMU Fair Ranked Voting". https://dgund.com/projects/fair-voting.
62. ↑ Donald, Beyer (14 July 2017). "H.R.3057 – 115th Congress (2017–2018): Fair Representation Act". https://www.congress.gov/bill/115th-congress/house-bill/3057.
63. ↑ https://electoral.gov.mt/ElectionResults/LocalCouncil?v=808
64. ↑ https://localgovernmentdivision.gov.mt/en/lc/Mosta/Pages/The-Local-Council/Mayor-and-Councillors.aspx
65. ↑ "Single Transferable Vote". The Department of Internal Affairs, NZ. https://www.stv.govt.nz/index.shtml.
66. ↑ "STV Information". http://www.stv.govt.nz/stv/index.htm.
67. ↑ "Hamilton City Council switches to STV system for elections". 6 August 2020. https://www.stuff.co.nz/waikato-times/news/122356263/hamilton-city-council-switches-to-stv-system-for-elections.
68. ↑ Edgeler, Graeme (12 September 2022). "As easy as 1, 2, 3: How to vote using STV". https://thespinoff.co.nz/local-elections-2022/12-09-2022/as-easy-as-1-2-3-how-to-vote-using-stv.
69. ↑ https://www.researchgate.net/publication/233430071_Detailed_description_of_the_stv_count_in_accordance_with_the_rules_in_the_scottish_local_government_elections_order_2007
70. ↑ "News Release: Final Proposals for Na h-Eileanan an Iar, Orkney Islands and Shetland Islands council areas submitted to Scottish Ministers" (PDF) (Press release). Boundaries Scotland. 28 May 2021
71. ↑ Amherst Town Council. "Ranked-Choice Voting Commission Report". https://www.amherstma.gov/DocumentCenter/View/53914/RCVC_Report_2020-12-01.
72. ↑ "Portland, Maine, Question 4, Proportional Ranked-Choice Voting Amendment (November 2022)". https://ballotpedia.org/Portland,_Maine,_Question_4,_Proportional_Ranked-Choice_Voting_Amendment_(November_2022).
73. ↑ "What offices are elected using Ranked-Choice Voting?". City of Minneapolis Elections & Voter Services. http://vote.minneapolismn.gov/rcv/what-is-rcv.
74. ↑ FairVote.org (3 May 2019). "Learning from the past to prepare for the future: RCV in NYC". https://www.fairvote.org/_learning_from_the_past_to_prepare_for_the_future_rcv_in_nyc.
75. ↑ "History of RCV". https://www.rankedchoicevoting.org/history_rcv.
76. ↑ "A short history of STV in the US". https://www.electoral-reform.org.uk/latest-news-and-research/publications/a-short-history-of-stv-in-the-us/.
77. ↑ Bernard Grofman. "Electoral systems change in Estonia". https://escholarship.org/content/qt9510610w/qt9510610w_noSplash_f408452bfb6b7384fad96622f560cbef.pdf.
78. ↑ A Report on Alberta Elections; Parliamentary Guide
79. ↑ "The Irish Senate elections of 1925". https://www.ark.ac.uk/elections/h1925.htm.
80. ↑ "Proportional Representation and its Importance". Proportional Representation Society of Australia. http://www.prsa.org.au/pr.html.
81. ↑ "Our mission". Electoral Reform Society. http://www.electoral-reform.org.uk/our-mission/.
82. ↑ "Proportional Ranked Choice Voting". FairVote. https://fairvote.org/our-reforms/proportional-ranked-choice-voting/.
83. ↑ "Ranked Choice Voting". FairVote. http://www.fairvote.org/rcv#rcvbenefits.
84. ↑ Ireland 2010, p. 177.
85. ↑ Monto, When Canada Had Proportional Representation, p. 33
86. ↑ "Do all countries have by-elections? Filling parliamentary vacancies around the world". https://www.electoral-reform.org.uk/do-all-countries-have-by-elections-filling-parliamentary-vacancies-around-the-world/.
87. ↑ "Local Elections Regulations, 1965. Section 87". http://www.irishstatutebook.ie/eli/1965/si/128/made/en/print.
88. ↑ "Change to the System for Filling Vacancies in the NI Assembly" (Press release). Northern Ireland Office. 10 February 2009. Archived from the original on 7 March 2012. Retrieved 5 October 2011.
89. ↑ 89.0 89.1 89.2 "33rd Dáil election results". https://data.oireachtas.ie/ie/oireachtas/electoralProcess/electionResults/dail/2020/2020-05-01_33rd-dail-general-election-results_en.pdf.
90. ↑ "Single Transferable Vote Resists Strategic Voting". https://courses.cs.duke.edu/fall06/cps296.2/stv_hard.pdf.
91. ↑ "Why Do Math?". https://www.whydomath.org/node/voting/academy_awards.html.
92. ↑ Margetts 2003, p. 68.
93. ↑ Scotl, Ballot Box (5 August 2022). "LE22: STV, it's only 1, 2, 3?". https://ballotbox.scot/le22-stv-1-2-3.
94. ↑ Ombler 2006.
95. ↑ Hoag, Effective Voting, (1914)
96. ↑ "Scotland". https://ukchristianparty.org/where-are-you/scotland/.
97. ↑ "Advantages and Disadvantages of Using the Single Transferable Vote System". 18 June 2013. https://www.uk-engage.org/2013/06/what-are-the-advantages-and-disadvantages-of-using-the-single-transferable-vote-stv-system/.
98. ↑ "The Highlands | Scotland.org". https://www.scotland.org/live-in-scotland/where-to-live-in-scotland/the-highlands.
99. ↑ "Legislative Council - State Election 2019". vtr.elections.nsw.gov.au. Archived from the original on 26 March 2019. Retrieved 26 March 2019
100. ↑ "Monotonicity Failure Under STV And Related Systems". https://userpages.umbc.edu/~nmiller/RESEARCH/MONOTONICITY.pdf.
101. ↑ Curtice 2012, p. 22.
102. ↑ Curtice 2012, p. 13.
103. ↑ 103.0 103.1 Curtice 2012, p. 14.
104. ↑ Curtice 2012, pp. 17–18.
105. ↑ Curtice 2012, pp. 15–16.
106. ↑ Curtice 2012, p. 23.
107. ↑ Model City Charter National Civic League

### Bibliography

* Bagehot, Walter (1894), The English Constitution (7th ed.), London: Kegan Paul, Trench, Trübner & Co.
* Curtice, John (2012). "2012 Scottish Local Government Elections". London: Electoral Reform Society. http://www.electoral-reform.org.uk/sites/default/files/2012-Scottish-Local-Government-Elections.pdf.
* Hill, I. D.; Wichmann, B. A.; Woodall, D. R. (1987). "Algorithm 123: Single Transferable Vote by Meek's Method". The Computer Journal 30 (3): 277–281. doi:10.1093/comjnl/30.3.277. ISSN 1460-2067.
* Ireland. Oireachtas. Joint Committee on the Constitution (2010). Article 16 of the Constitution: Review of the Electoral System for the Election of Members to Dáil Éireann. Dublin: Stationery Office. ISBN 978-1406425017. http://www.rte.ie/news/2010/0722/election.pdf. Retrieved 20 November 2010.
* Lambert, Enid; Lakeman, James D. (1955). Voting in Democracies. London: Faber and Faber.
* Margetts, Helen (2003). "Electoral Reform". in Fisher, Justin; Denver, David; Benyon, John. Central Debates in British Politics. Abingdon, England: Routledge. 2014. pp. 64–82. ISBN 978-0582437272.
* Meek, B. L. (1994a). "A New Approach to the Single Transferable Vote. Paper I: Equality of Treatment of Voters and a Feedback Mechanism for Vote Counting". Voting Matters (1): 1–7. ISSN 1745-6231. http://www.mcdougall.org.uk/VM/ISSUE1/P1.HTM. Retrieved 30 August 2017.
* ——— (1994b). "A New Approach to the Single Transferable Vote. Paper II: The Problem of Non-transferable Votes". Voting Matters (1): 7–11. ISSN 1745-6231. http://www.mcdougall.org.uk/VM/ISSUE1/P2.HTM. Retrieved 30 August 2017.
* Mill, John Stuart (1861). Considerations on Representative Government. London: Parker, Son, and Bourn. ISBN 978-1414254685. https://books.google.com/books?id=emABAAAAYAAJ. Retrieved 20 June 2014.
* Newland, Robert A. (1984). "The STV Quota". Representation 24 (95): 14–17. doi:10.1080/00344898408459347. ISSN 0034-4893.
* Ombler, Franz (2006). "Booklet Position Effects, and Two New statistics to Gauge Voter Understanding of the Need to Rank Candidates in Preferential Elections". Voting Matters (21): 12–21. ISSN 1745-6231. http://www.votingmatters.org.uk/ISSUE21/I21P3.pdf. Retrieved 30 August 2017.
* Wells, H. G. (1918). In the Fourth Year: Anticipation of a World Peace. London: Chatto & Windus. https://archive.org/stream/infourthyear00well#page/120/mode/2up. Retrieved 6 May 2016.
* Bach, Stanley (2003). Platypus and Parliament: The Australian Senate in Theory and Practice. Department of the Senate. ISBN 978-0642712912. http://www.aph.gov.au/About_Parliament/Senate/Powers_practice_n_procedures/platparl.
* Ashworth, H.P.C.; Ashworth, T.R. (1900). Proportional Representation Applied to Party Government. Melbourne: Robertson and Co.

## Further reading

* Bartholdi, John J. III; Orlin, James B. (1991). "Single Transferable Vote Resists Strategic Voting". Social Choice and Welfare 8 (4): 341–354. doi:10.1007/BF00183045. ISSN 0176-1714. http://www.isye.gatech.edu/~jjb/papers/stv.pdf. Retrieved 30 August 2017.
* Benade, Gerdus; Buck, Ruth; Duchin, Moon; Gold, Dara; Weighill, Thomas (2021). "Ranked Choice Voting and Minority Representation". SSRN. doi:10.2139/ssrn.3778021. https://papers.ssrn.com/sol3/Delivery.cfm/SSRN_ID3778021_code4567889.pdf. Retrieved 2 March 2021.
* Geller, Chris (2002). "Single Transferable Vote with Borda Elimination: A New Vote-Counting System". Deakin University, Faculty of Business and Law. https://www.deakin.edu.au/__data/assets/pdf_file/0005/402575/wp2201.pdf.
* ——— (2004). "Single Transferable Vote with Borda Elimination: Proportional Representation, Moderation, Quasi-chaos and Stability". Electoral Studies 24 (2): 265–280. doi:10.1016/j.electstud.2004.06.004. ISSN 1873-6890.
* O'Neill, Jeffrey C. (2004). "Tie-Breaking with the Single Transferable Vote". Voting Matters (18): 14–17. ISSN 1745-6231. http://www.votingmatters.org.uk/ISSUE18/I18P6.PDF. Retrieved 30 August 2017.
* Sawer, Marian; Miskin, Sarah (1999). Papers on Parliament No. 34 Representation and Institutional Change: 50 Years of Proportional Representation in the Senate. Department of the Senate. ISBN 0642710619. https://www.aph.gov.au/binaries/senate/pubs/pops/pop34/pop34.pdf.
* Stone, Bruce (2008). "State legislative councils: designing for accountability." In N. Aroney, S. Prasser, & J. R. Nethercote (Eds.), Restraining Elective Dictatorship. UWA Publishing. pp. 175–195. ISBN 978-1921401-091. https://research-repository.uwa.edu.au/files/1485835/5257_PID5257.pdf.

## External links

* ACE Project
* A concise STV analogy – from Accurate Democracy
* Accurate Democracy lists a dozen programs for computing the single transferable vote.
* Australia's Upper Houses – ABC Rear Vision A podcast about the development of Australia's upper houses into STV elected chambers.

0.00

(0 votes)

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Social:Single_transferable_vote&oldid=3850738"
*[SNTV]: Single non-transferable vote