Type I and type II errors

Short description: Concepts from statistical hypothesis testing

In statistical hypothesis testing, a type I error is the mistaken rejection of an actually true null hypothesis (also known as a "false positive" finding or conclusion; example: "an innocent person is convicted"), while a type II error is the failure to reject a null hypothesis that is actually false (also known as a "false negative" finding or conclusion; example: "a guilty person is not convicted").[1] Much of statistical theory revolves around the minimization of one or both of these errors, though the complete elimination of either is a statistical impossibility if the outcome is not determined by a known, observable causal process. By selecting a low threshold (cut-off) value and modifying the alpha (α) level, the quality of the hypothesis test can be increased.[citation needed] The knowledge of type I errors and type II errors is widely used in medical science, biometrics and computer science.[clarification needed]

Intuitively, type I errors can be thought of as errors of commission (i.e., the researcher unluckily concludes that something is the fact). For instance, consider a study where researchers compare a drug with a placebo. If the patients who are given the drug get better than the patients given the placebo by chance, it may appear that the drug is effective, but in fact the conclusion is incorrect. In reverse, type II errors are errors of omission. In the example above, if the patients who got the drug did not get better at a higher rate than the ones who got the placebo, but this was a random fluke, that would be a type II error. The consequence of a type II error depends on the size and direction of the missed determination and the circumstances. An expensive cure for one in a million patients may be inconsequential even if it truly is a cure.

## Contents

* 1 Definition
* 1.1 Statistical background
* 1.2 Type I error
* 1.3 Type II error
* 1.4 Crossover error rate
* 1.5 False positive and false negative
* 1.6 Table of error types
* 2 Error rate
* 2.1 The quality of hypothesis test
* 3 Example
* 3.1 Vehicle speed measuring
* 4 Etymology
* 5 Related terms
* 5.1 Null hypothesis
* 5.2 Statistical significance
* 6 Application domains
* 6.1 Medicine
* 6.1.1 Medical screening
* 6.1.2 Medical testing
* 6.2 Biometrics
* 6.3 Security screening
* 6.4 Computers
* 7 See also
* 8 References
* 9 Bibliography
* 10 External links

## Definition

### Statistical background

In statistical test theory, the notion of a statistical error is an integral part of hypothesis testing. The test goes about choosing about two competing propositions called null hypothesis, denoted by H0 and alternative hypothesis, denoted by H1. This is conceptually similar to the judgement in a court trial. The null hypothesis corresponds to the position of the defendant: just as he is presumed to be innocent until proven guilty, so is the null hypothesis presumed to be true until the data provide convincing evidence against it. The alternative hypothesis corresponds to the position against the defendant. Specifically, the null hypothesis also involves the absence of a difference or the absence of an association. Thus, the null hypothesis can never be that there is a difference or an association.

If the result of the test corresponds with reality, then a correct decision has been made. However, if the result of the test does not correspond with reality, then an error has occurred. There are two situations in which the decision is wrong. The null hypothesis may be true, whereas we reject H0. On the other hand, the alternative hypothesis H1 may be true, whereas we do not reject H0. Two types of error are distinguished: type I error and type II error.[2]

### Type I error

The first kind of error is the mistaken rejection of a null hypothesis as the result of a test procedure. This kind of error is called a type I error (false positive) and is sometimes called an error of the first kind. In terms of the courtroom example, a type I error corresponds to convicting an innocent defendant.

### Type II error

The second kind of error is the mistaken failure to reject the null hypothesis as the result of a test procedure. This sort of error is called a type II error (false negative) and is also referred to as an error of the second kind. In terms of the courtroom example, a type II error corresponds to acquitting a criminal.[3]

### Crossover error rate

The crossover error rate (CER) is the point at which type I errors and type II errors are equal. A system with a lower CER value provides more accuracy than a system with a higher CER value.

### False positive and false negative

Further information: False positives and false negatives

In terms of false positives and false negatives, a positive result corresponds to rejecting the null hypothesis, while a negative result corresponds to failing to reject the null hypothesis; "false" means the conclusion drawn is incorrect. Thus, a type I error is equivalent to a false positive, and a type II error is equivalent to a false negative.

### Table of error types

Tabularised relations between truth/falseness of the null hypothesis and outcomes of the test:[4]

Table of error types  |
Null hypothesis (H0) is

|

True  | False
Decision
about null
hypothesis (H0)  |
Fail to reject  |
Correct inference
(true negative)

(probability = 1−α)

| Type II error
(false negative)
(probability = β)
Reject  | Type I error
(false positive)
(probability = α)  |
Correct inference
(true positive)

(probability = 1−β)

##  Error rate

The results obtained from negative sample (left curve) overlap with the results obtained from positive samples (right curve). By moving the result cutoff value (vertical bar), the rate of false positives (FP) can be decreased, at the cost of raising the number of false negatives (FN), or vice versa (TP = True Positives, TPR = True Positive Rate, FPR = False Positive Rate, TN = True Negatives).

A perfect test would have zero false positives and zero false negatives. However, statistical methods are probabilistic, and it cannot be known for certain whether statistical conclusions are correct. Whenever there is uncertainty, there is the possibility of making an error. Considering this nature of statistics science, all statistical hypothesis tests have a probability of making type I and type II errors.[citation needed]

* The type I error rate is the probability of rejecting the null hypothesis given that it is true. The test is designed to keep the type I error rate below a prespecified bound called the significance level, usually denoted by the Greek letter α (alpha) and is also called the alpha level. Usually, the significance level is set to 0.05 (5%), implying that it is acceptable to have a 5% probability of incorrectly rejecting the true null hypothesis.[5]
* The rate of the type II error is denoted by the Greek letter β (beta) and related to the power of a test, which equals 1−β.[citation needed]

These two types of error rates are traded off against each other: for any given sample set, the effort to reduce one type of error generally results in increasing the other type of error.[citation needed]

### The quality of hypothesis test

The same idea can be expressed in terms of the rate of correct results and therefore used to minimize error rates and improve the quality of hypothesis test. To reduce the probability of committing a type I error, making the alpha value more stringent is quite simple and efficient. To decrease the probability of committing a type II error, which is closely associated with analyses' power, either increasing the test's sample size or relaxing the alpha level could increase the analyses' power.[citation needed] A test statistic is robust if the type I error rate is controlled.

Varying different threshold (cut-off) value could also be used to make the test either more specific or more sensitive, which in turn elevates the test quality. For example, imagine a medical test, in which an experimenter might measure the concentration of a certain protein in the blood sample. The experimenter could adjust the threshold (black vertical line in the figure) and people would be diagnosed as having diseases if any number is detected above this certain threshold. According to the image, changing the threshold would result in changes in false positives and false negatives, corresponding to movement on the curve.[citation needed]

## Example

Since in a real experiment it is impossible to avoid all type I and type II errors, it is important to consider the amount of risk one is willing to take to falsely reject H0 or accept H0. The solution to this question would be to report the p-value or significance level α of the statistic. For example, if the p-value of a test statistic result is estimated at 0.0596, then there is a probability of 5.96% that we falsely reject H0. Or, if we say, the statistic is performed at level α, like 0.05, then we allow to falsely reject H0 at 5%. A significance level α of 0.05 is relatively common, but there is no general rule that fits all scenarios.

### Vehicle speed measuring

The speed limit of a freeway in the United States is 120 kilometers per hour (75 mph). A device is set to measure the speed of passing vehicles. Suppose that the device will conduct three measurements of the speed of a passing vehicle, recording as a random sample X1, X2, X3. The traffic police will or will not fine the drivers depending on the average speed [math]\displaystyle{ \bar X }[/math]. That is to say, the test statistic

[math]\displaystyle{ T=\frac{X_1+X_2+X_3}{3}=\bar X }[/math]

In addition, we suppose that the measurements X1, X2, X3 are modeled as normal distribution N(μ,4). Then, T should follow N(μ,4/3) and the parameter μ represents the true speed of passing vehicle. In this experiment, the null hypothesis H0 and the alternative hypothesis H1 should be

H0: μ=120  against  H1: μ>120\.

If we perform the statistic level at α=0.05, then a critical value c should be calculated to solve

[math]\displaystyle{ P\left(Z\geqslant\frac{c-120}{\frac{2}{\sqrt{3}}}\right)=0.05 }[/math]

According to change-of-units rule for the normal distribution. Referring to Z-table, we can get

[math]\displaystyle{ \frac{c-120}{\frac{2}{\sqrt{3}}}=1.645\Rightarrow c=121.9 }[/math]

Here, the critical region. That is to say, if the recorded speed of a vehicle is greater than critical value 121.9, the driver will be fined. However, there are still 5% of the drivers are falsely fined since the recorded average speed is greater than 121.9 but the true speed does not pass 120, which we say, a type I error.

The type II error corresponds to the case that the true speed of a vehicle is over 120 kilometers per hour but the driver is not fined. For example, if the true speed of a vehicle μ=125, the probability that the driver is not fined can be calculated as

[math]\displaystyle{ P=(T\lt 121.9|\mu=125)=P\left(\frac{T-125}{\frac{2}{\sqrt{3}}}\lt \frac{121.9-125}{\frac{2}{\sqrt{3}}}\right)=\phi(-2.68)=0.0036 }[/math]

which means, if the true speed of a vehicle is 125, the driver has the probability of 0.36% to avoid the fine when the statistic is performed at level α=0.05, since the recorded average speed is lower than 121.9. If the true speed is closer to 121.9 than 125, then the probability of avoiding the fine will also be higher.

The tradeoffs between type I error and type II error should also be considered. That is, in this case, if the traffic police do not want to falsely fine innocent drivers, the level α can be set to a smaller value, like 0.01. However, if that is the case, more drivers whose true speed is over 120 kilometers per hour, like 125, would be more likely to avoid the fine.

## Etymology

In 1928, Jerzy Neyman (1894–1981) and Egon Pearson (1895–1980), both eminent statisticians, discussed the problems associated with "deciding whether or not a particular sample may be judged as likely to have been randomly drawn from a certain population":[6] and, as Florence Nightingale David remarked, "it is necessary to remember the adjective 'random' [in the term 'random sample'] should apply to the method of drawing the sample and not to the sample itself".[7]

They identified "two sources of error", namely:

(a) the error of rejecting a hypothesis that should have not been rejected, and

(b) the error of failing to reject a hypothesis that should have been rejected.

In 1930, they elaborated on these two sources of error, remarking that:

> ...in testing hypotheses two considerations must be kept in view, we must be able to reduce the chance of rejecting a true hypothesis to as low a value as desired; the test must be so devised that it will reject the hypothesis tested when it is likely to be false.

In 1933, they observed that these "problems are rarely presented in such a form that we can discriminate with certainty between the true and false hypothesis" . They also noted that, in deciding whether to fail to reject, or reject a particular hypothesis amongst a "set of alternative hypotheses", H1, H2..., it was easy to make an error:

> ...[and] these errors will be of two kinds:

>     (I) we reject H0 [i.e., the hypothesis to be tested] when it is true,[8]
>     (II) we fail to reject H0 when some alternative hypothesis HA or H1 is true. (There are various notations for the alternative).

In all of the papers co-written by Neyman and Pearson the expression H0 always signifies "the hypothesis to be tested".

In the same paper they call these two sources of error, errors of type I and errors of type II respectively.[9]

## Related terms

### Null hypothesis

Main page: Null hypothesis

It is standard practice for statisticians to conduct tests in order to determine whether or not a "speculative hypothesis" concerning the observed phenomena of the world (or its inhabitants) can be supported. The results of such testing determine whether a particular set of results agrees reasonably (or does not agree) with the speculated hypothesis.

On the basis that it is always assumed, by statistical convention, that the speculated hypothesis is wrong, and the so-called "null hypothesis" that the observed phenomena simply occur by chance (and that, as a consequence, the speculated agent has no effect) – the test will determine whether this hypothesis is right or wrong. This is why the hypothesis under test is often called the null hypothesis (most likely, coined by Fisher (1935, p. 19)), because it is this hypothesis that is to be either nullified or not nullified by the test. When the null hypothesis is nullified, it is possible to conclude that data support the "alternative hypothesis" (which is the original speculated one).

The consistent application by statisticians of Neyman and Pearson's convention of representing "the hypothesis to be tested" (or "the hypothesis to be nullified") with the expression H0 has led to circumstances where many understand the term "the null hypothesis" as meaning "the nil hypothesis" – a statement that the results in question have arisen through chance. This is not necessarily the case – the key restriction, as per Fisher (1966), is that "the null hypothesis must be exact, that is free from vagueness and ambiguity, because it must supply the basis of the 'problem of distribution,' of which the test of significance is the solution."[10] As a consequence of this, in experimental science the null hypothesis is generally a statement that a particular treatment has no effect; in observational science, it is that there is no difference between the value of a particular measured variable, and that of an experimental prediction.[citation needed]

### Statistical significance

If the probability of obtaining a result as extreme as the one obtained, supposing that the null hypothesis were true, is lower than a pre-specified cut-off probability (for example, 5%), then the result is said to be statistically significant and the null hypothesis is rejected.

British statistician Sir Ronald Aylmer Fisher (1890–1962) stressed that the "null hypothesis":

> ... is never proved or established, but is possibly disproved, in the course of experimentation. Every experiment may be said to exist only in order to give the facts a chance of disproving the null hypothesis.

> --Fisher, 1935, p.19

## Application domains

### Medicine

In the practice of medicine, the differences between the applications of screening and testing are considerable.

#### Medical screening

Screening involves relatively cheap tests that are given to large populations, none of whom manifest any clinical indication of disease (e.g., Pap smears).

Testing involves far more expensive, often invasive, procedures that are given only to those who manifest some clinical indication of disease, and are most often applied to confirm a suspected diagnosis.

For example, most states in the USA require newborns to be screened for phenylketonuria and hypothyroidism, among other congenital disorders.

Hypothesis: "The newborns have phenylketonuria and hypothyroidism"

Null Hypothesis (H0): "The newborns do not have phenylketonuria and hypothyroidism",

Type I error (false positive): The true fact is that the newborns do not have phenylketonuria and hypothyroidism but we consider they have the disorders according to the data.

Type II error (false negative): The true fact is that the newborns have phenylketonuria and hypothyroidism but we consider they do not have the disorders according to the data.

Although they display a high rate of false positives, the screening tests are considered valuable because they greatly increase the likelihood of detecting these disorders at a far earlier stage.

The simple blood tests used to screen possible blood donors for HIV and hepatitis have a significant rate of false positives; however, physicians use much more expensive and far more precise tests to determine whether a person is actually infected with either of these viruses.

Perhaps the most widely discussed false positives in medical screening come from the breast cancer screening procedure mammography. The US rate of false positive mammograms is up to 15%, the highest in world. One consequence of the high false positive rate in the US is that, in any 10-year period, half of the American women screened receive a false positive mammogram. False positive mammograms are costly, with over $100 million spent annually in the U.S. on follow-up testing and treatment. They also cause women unneeded anxiety. As a result of the high false positive rate in the US, as many as 90–95% of women who get a positive mammogram do not have the condition. The lowest rate in the world is in the Netherlands, 1%. The lowest rates are generally in Northern Europe where mammography films are read twice and a high threshold for additional testing is set (the high threshold decreases the power of the test).

The ideal population screening test would be cheap, easy to administer, and produce zero false-negatives, if possible. Such tests usually produce more false-positives, which can subsequently be sorted out by more sophisticated (and expensive) testing.

#### Medical testing

False negatives and false positives are significant issues in medical testing.

Hypothesis: "The patients have the specific disease".

Null hypothesis (H0): "The patients do not have the specific disease".

Type I error (false positive): "The true fact is that the patients do not have a specific disease but the physicians judges the patients was ill according to the test reports".

False positives can also produce serious and counter-intuitive problems when the condition being searched for is rare, as in screening. If a test has a false positive rate of one in ten thousand, but only one in a million samples (or people) is a true positive, most of the positives detected by that test will be false. The probability that an observed positive result is a false positive may be calculated using Bayes' theorem.

Type II error (false negative): "The true fact is that the disease is actually present but the test reports provide a falsely reassuring message to patients and physicians that the disease is absent".

False negatives produce serious and counter-intuitive problems, especially when the condition being searched for is common. If a test with a false negative rate of only 10% is used to test a population with a true occurrence rate of 70%, many of the negatives detected by the test will be false.

This sometimes leads to inappropriate or inadequate treatment of both the patient and their disease. A common example is relying on cardiac stress tests to detect coronary atherosclerosis, even though cardiac stress tests are known to only detect limitations of coronary artery blood flow due to advanced stenosis.

### Biometrics

Biometric matching, such as for fingerprint recognition, facial recognition or iris recognition, is susceptible to type I and type II errors.

Hypothesis: "The input does not identify someone in the searched list of people"

Null hypothesis: "The input does identify someone in the searched list of people"

Type I error (false reject rate): "The true fact is that the person is someone in the searched list but the system concludes that the person is not according to the data".

Type II error (false match rate): "The true fact is that the person is not someone in the searched list but the system concludes that the person is someone whom we are looking for according to the data".

The probability of type I errors is called the "false reject rate" (FRR) or false non-match rate (FNMR), while the probability of type II errors is called the "false accept rate" (FAR) or false match rate (FMR).

If the system is designed to rarely match suspects then the probability of type II errors can be called the "false alarm rate". On the other hand, if the system is used for validation (and acceptance is the norm) then the FAR is a measure of system security, while the FRR measures user inconvenience level.

### Security screening

False positives are routinely found every day in airport security screening, which are ultimately visual inspection systems. The installed security alarms are intended to prevent weapons being brought onto aircraft; yet they are often set to such high sensitivity that they alarm many times a day for minor items, such as keys, belt buckles, loose change, mobile phones, and tacks in shoes.

Here, the null hypothesis is that the item is not a weapon, while the alternative hypothesis is that the item is a weapon.

A type I error (false positive): "The true fact is that the item is not a weapon but the system still alarms".

Type II error (false negative) "The true fact is that the item is a weapon but the system keeps silent at this time".

The ratio of false positives (identifying an innocent traveler as a terrorist) to true positives (detecting a would-be terrorist) is, therefore, very high; and because almost every alarm is a false positive, the positive predictive value of these screening tests is very low.

The relative cost of false results determines the likelihood that test creators allow these events to occur. As the cost of a false negative in this scenario is extremely high (not detecting a bomb being brought onto a plane could result in hundreds of deaths) whilst the cost of a false positive is relatively low (a reasonably simple further inspection) the most appropriate test is one with a low statistical specificity but high statistical sensitivity (one that allows a high rate of false positives in return for minimal false negatives).

### Computers

The notions of false positives and false negatives have a wide currency in the realm of computers and computer applications, including computer security, spam filtering, Malware, Optical character recognition and many others.

For example, in the case of spam filtering the hypothesis here is that the message is a spam.

Thus, null hypothesis: "The message is not a spam".

Type I error (false positive): "Spam filtering or spam blocking techniques wrongly classify a legitimate email message as spam and, as a result, interferes with its delivery".

While most anti-spam tactics can block or filter a high percentage of unwanted emails, doing so without creating significant false-positive results is a much more demanding task.

Type II error (false negative): "Spam email is not detected as spam, but is classified as non-spam". A low number of false negatives is an indicator of the efficiency of spam filtering.

## See also

* Binary classification
* Detection theory
* Egon Pearson
* Ethics in mathematics
* False positive paradox
* False discovery rate
* Family-wise error rate
* Information retrieval performance measures
* Neyman–Pearson lemma
* Null hypothesis
* Probability of a hypothesis for Bayesian inference
* Precision and recall
* Prosecutor's fallacy
* Prozone phenomenon
* Receiver operating characteristic
* Sensitivity and specificity
* Statisticians' and engineers' cross-reference of statistical terms
* Testing hypotheses suggested by the data
* Type III error

## References

1. ↑ "Type I Error and Type II Error". https://explorable.com/type-i-error.
2. ↑ A modern introduction to probability and statistics : understanding why and how. Dekking, Michel, 1946-. London: Springer. 2005. ISBN 978-1-85233-896-1. OCLC 262680588.
3. ↑ A modern introduction to probability and statistics : understanding why and how. Dekking, Michel, 1946-. London: Springer. 2005. ISBN 978-1-85233-896-1. OCLC 262680588.
4. ↑ Sheskin, David (2004). Handbook of Parametric and Nonparametric Statistical Procedures. CRC Press. p. 54. ISBN 1584884401.
5. ↑ Lindenmayer, David. (2005). Practical conservation biology. Burgman, Mark A.. Collingwood, Vic.: CSIRO Pub. ISBN 0-643-09310-9. OCLC 65216357.
6. ↑ NEYMAN, J.; PEARSON, E. S. (1928). "On the Use and Interpretation of Certain Test Criteria for Purposes of Statistical Inference Part I". Biometrika 20A (1–2): 175–240. doi:10.1093/biomet/20a.1-2.175. ISSN 0006-3444.
7. ↑ C.I.K.F. (July 1951). "Probability Theory for Statistical Methods. By F. N. David. [Pp. ix + 230. Cambridge University Press. 1949. Price 155.]". Journal of the Staple Inn Actuarial Society 10 (3): 243–244. doi:10.1017/s0020269x00004564. ISSN 0020-269X.
8. ↑ Note that the subscript in the expression H0 is a zero (indicating null), and is not an "O" (indicating original).
9. ↑ Neyman, J.; Pearson, E. S. (1933-10-30). "The testing of statistical hypotheses in relation to probabilities a priori". Mathematical Proceedings of the Cambridge Philosophical Society 29 (4): 492–510. doi:10.1017/s030500410001152x. ISSN 0305-0041. Bibcode: 1933PCPS...29..492N.
10. ↑ Fisher, R.A. (1966). The design of experiments. 8th edition. Hafner:Edinburgh.

## Bibliography

* Betz, M.A. & Gabriel, K.R., "Type IV Errors and Analysis of Simple Effects", Journal of Educational Statistics, Vol.3, No.2, (Summer 1978), pp. 121–144.
* David, F.N., "A Power Function for Tests of Randomness in a Sequence of Alternatives", Biometrika, Vol.34, Nos.3/4, (December 1947), pp. 335–339.
* Fisher, R.A., The Design of Experiments, Oliver & Boyd (Edinburgh), 1935.
* Gambrill, W., "False Positives on Newborns' Disease Tests Worry Parents", Health Day, (5 June 2006). [1]
* Kaiser, H.F., "Directional Statistical Decisions", Psychological Review, Vol.67, No.3, (May 1960), pp. 160–167.
* Kimball, A.W., "Errors of the Third Kind in Statistical Consulting", Journal of the American Statistical Association, Vol.52, No.278, (June 1957), pp. 133–142.
* Lubin, A., "The Interpretation of Significant Interaction", Educational and Psychological Measurement, Vol.21, No.4, (Winter 1961), pp. 807–817.
* Marascuilo, L.A. & Levin, J.R., "Appropriate Post Hoc Comparisons for Interaction and nested Hypotheses in Analysis of Variance Designs: The Elimination of Type-IV Errors", American Educational Research Journal, Vol.7., No.3, (May 1970), pp. 397–421.
* Mitroff, I.I. & Featheringham, T.R., "On Systemic Problem Solving and the Error of the Third Kind", Behavioral Science, Vol.19, No.6, (November 1974), pp. 383–393.
* Mosteller, F., "A k-Sample Slippage Test for an Extreme Population", The Annals of Mathematical Statistics, Vol.19, No.1, (March 1948), pp. 58–65.
* Moulton, R.T., "Network Security", Datamation, Vol.29, No.7, (July 1983), pp. 121–127.
* Raiffa, H., Decision Analysis: Introductory Lectures on Choices Under Uncertainty, Addison–Wesley, (Reading), 1968.

## External links

* Bias and Confounding – presentation by Nigel Paneth, Graduate School of Public Health, University of Pittsburgh

* v
* t
* e

Statistics

* Outline
* Index

Descriptive statistics

| Continuous data|

| Center|

* Mean
* arithmetic
* geometric
* harmonic
* Median
* Mode

|

Dispersion|

* Variance
* Standard deviation
* Coefficient of variation
* Percentile
* Range
* Interquartile range

Shape|

* Central limit theorem
* Moments
* Skewness
* Kurtosis
* L-moments

Count data|

* Index of dispersion

Summary tables|

* Grouped data
* Frequency distribution
* Contingency table

Dependence|

* Pearson product-moment correlation
* Rank correlation
* Spearman's rho
* Kendall's tau
* Partial correlation
* Scatter plot

Graphics|

* Bar chart
* Biplot
* Box plot
* Control chart
* Correlogram
* Fan chart
* Forest plot
* Histogram
* Pie chart
* Q–Q plot
* Run chart
* Scatter plot
* Stem-and-leaf display
* Radar chart
* Violin plot

Data collection

| Study design|

* Population
* Statistic
* Effect size
* Statistical power
* Optimal design
* Sample size determination
* Replication
* Missing data

|

Survey methodology|

* Sampling
* stratified
* cluster
* Standard error
* Opinion poll
* Questionnaire

Controlled experiments|

* Scientific control
* Randomized experiment
* Randomized controlled trial
* Random assignment
* Blocking
* Interaction
* Factorial experiment

Adaptive Designs|

* Adaptive clinical trial
* Up-and-Down Designs
* Stochastic approximation

Observational Studies|

* Cross-sectional study
* Cohort study
* Natural experiment
* Quasi-experiment

Statistical inference

| Statistical theory|

* Population
* Statistic
* Probability distribution
* Sampling distribution
* Order statistic
* Empirical distribution
* Density estimation
* Statistical model
* Model specification
* Lp space
* Parameter
* location
* scale
* shape
* Parametric family
* Likelihood (monotone)
* Location–scale family
* Exponential family
* Completeness
* Sufficiency
* Statistical functional
* Bootstrap
* U
* V
* Optimal decision
* loss function
* Efficiency
* Statistical distance
* divergence
* Asymptotics
* Robustness

|

Frequentist inference|

| Point estimation|

* Estimating equations
* Maximum likelihood
* Method of moments
* M-estimator
* Minimum distance
* Unbiased estimators
* Mean-unbiased minimum-variance
* Rao–Blackwellization
* Lehmann–Scheffé theorem
* Median unbiased
* Plug-in

|

Interval estimation|

* Confidence interval
* Pivot
* Likelihood interval
* Prediction interval
* Tolerance interval
* Resampling
* Bootstrap
* Jackknife

Testing hypotheses|

* 1- & 2-tails
* Power
* Uniformly most powerful test
* Permutation test
* Randomization test
* Multiple comparisons

Parametric tests|

* Likelihood-ratio
* Score/Lagrange multiplier
* Wald

Specific tests|

* Z-test (normal)
* Student's t-test
* F-test

Goodness of fit|

* Chi-squared
* G-test
* Kolmogorov–Smirnov
* Anderson–Darling
* Lilliefors
* Jarque–Bera
* Normality (Shapiro–Wilk)
* Likelihood-ratio test
* Model selection
* Cross validation
* AIC
* BIC

Rank statistics|

* Sign
* Sample median
* Signed rank (Wilcoxon)
* Hodges–Lehmann estimator
* Rank sum (Mann–Whitney)
* Nonparametric anova
* 1-way (Kruskal–Wallis)
* 2-way (Friedman)
* Ordered alternative (Jonckheere–Terpstra)

Bayesian inference|

* Bayesian probability
* prior
* posterior
* Credible interval
* Bayes factor
* Bayesian estimator
* Maximum posterior estimator

* Correlation
* Regression analysis

| Correlation|

* Pearson product-moment
* Partial correlation
* Confounding variable
* Coefficient of determination

|

Regression analysis|

* Errors and residuals
* Regression validation
* Mixed effects models
* Simultaneous equations models
* Multivariate adaptive regression splines (MARS)

Linear regression|

* Simple linear regression
* Ordinary least squares
* General linear model
* Bayesian regression

Non-standard predictors|

* Nonlinear regression
* Nonparametric
* Semiparametric
* Isotonic
* Robust
* Heteroscedasticity
* Homoscedasticity

Generalized linear model|

* Exponential families
* Logistic (Bernoulli) / Binomial / Poisson regressions

Partition of variance|

* Analysis of variance (ANOVA, anova)
* Analysis of covariance
* Multivariate ANOVA
* Degrees of freedom

Categorical / Multivariate / Time-series / Survival analysis

| Categorical|

* Cohen's kappa
* Contingency table
* Graphical model
* Log-linear model
* McNemar's test

|

Multivariate|

* Regression
* Manova
* Principal components
* Canonical correlation
* Discriminant analysis
* Cluster analysis
* Classification
* Structural equation model
* Factor analysis
* Multivariate distributions
* Elliptical distributions
* Normal

Time-series|

| General|

* Decomposition
* Trend
* Stationarity
* Seasonal adjustment
* Exponential smoothing
* Cointegration
* Structural break
* Granger causality

|

Specific tests|

* Dickey–Fuller
* Johansen
* Q-statistic (Ljung–Box)
* Durbin–Watson
* Breusch–Godfrey

Time domain|

* Autocorrelation (ACF)
* partial (PACF)
* Cross-correlation (XCF)
* ARMA model
* ARIMA model (Box–Jenkins)
* Autoregressive conditional heteroskedasticity (ARCH)
* Vector autoregression (VAR)

Frequency domain|

* Spectral density estimation
* Fourier analysis
* Wavelet
* Whittle likelihood

Survival|

| Survival function|

* Kaplan–Meier estimator (product limit)
* Proportional hazards models
* Accelerated failure time (AFT) model
* First hitting time

|

Hazard function|

* Nelson–Aalen estimator

Test|

* Log-rank test

Applications

| Biostatistics|

* Bioinformatics
* Clinical trials / studies
* Epidemiology
* Medical statistics

|

Engineering statistics|

* Chemometrics
* Methods engineering
* Probabilistic design
* Process / quality control
* Reliability
* System identification

Social statistics|

* Actuarial science
* Census
* Crime statistics
* Demography
* Econometrics
* Jurimetrics
* National accounts
* Official statistics
* Population statistics
* Psychometrics

Spatial statistics|

* Cartography
* Environmental statistics
* Geographic information system
* Geostatistics
* Kriging

* Category
* '
* Commons
* WikiProject

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Type I and type II errors. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Type_I_and_type_II_errors&oldid=2995939"
*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template