Upwind differencing scheme for convection

The upwind differencing scheme is a method used in numerical methods in computational fluid dynamics for convection–diffusion problems. This scheme is specific for Peclet number greater than 2 or less than −2

## Contents

* 1 Description
* 2 Use
* 3 Assessment
* 4 References
* 5 See also

## Description

By taking into account the direction of the flow, the upwind differencing scheme overcomes that inability of the central differencing scheme. This scheme is developed for strong convective flows with suppressed diffusion effects. Also known as ‘Donor Cell’ Differencing Scheme, the convected value of property ϕ at the cell face is adopted from the upstream node.

It can be described by Steady convection-diffusion partial Differential Equation:[1]: 103 [2][circular reference] ∂∂t(ρϕ)+∇⋅(ρ𝐮ϕ)=∇⋅(Γ∇ϕ)+Sϕ

Continuity equation: (ρuA)e−(ρuA)w=0[1]: 104 [3][circular reference]

where ρ is density, Γ is the diffusion coefficient, 𝐮 is the velocity vector, ϕ is the property to be computed, Sϕ is the source term, and the subscripts e and w refer to the "east" and "west" faces of the cell (see Fig. 1 below).

After discretization, applying continuity equation, and taking source term equals to zero we get[4][circular reference]

Central difference discretized equation[1]: 105

Feϕe−Fwϕw=De(ϕE−ϕP)−Dw(ϕP−ϕW)

|
|

(1)

Fe−Fw=0

|
|

(2)

Lower case denotes the face and upper case denotes node; E, W, and P refer to the "East," "West," and "Central" cell. (again, see Fig. 1 below).

Defining variable F as convection mass flux and variable D as diffusion conductance F=ρuA and D=ΓAδx

Peclet number (Pe) is a non-dimensional parameter determining the comparative strengths of convection and diffusion

Peclet number: Pe=FD=ρuΓ/δx

For a Peclet number of lower value (|Pe| < 2), diffusion is dominant and for this the central difference scheme is used. For other values of the Peclet number, the upwind scheme is used for convection-dominated flows with Peclet number (|Pe| > 2).

For positive flow direction

uw>0ue>0 Corresponding upwind scheme equation:[1]: 115

FeϕP−FwϕW=De(ϕE−ϕP)−Dw(ϕP−ϕW)

|
|

(3)

Fig 1:Upwind scheme for positive flow direction

Due to strong convection and suppressed diffusion[1]: 115 ϕe=ϕPϕw=ϕW

Rearranging equation (3) gives [(Dw+Fw)+De+(Fe−Fw)]ϕP=(Dw+Fw)ϕW+DeϕE)

Identifying coefficients, aP=[(Dw+Fw)+De+(Fe−Fw)]aW=(Dw+Fw)aE=De

For negative flow direction uw<0ue<0

Corresponding upwind scheme equation:[1]: 115

FeϕE−FwϕP=De(ϕE−ϕP)−Dw(ϕP−ϕW)

|
|

(4)

Fig 2: Upwind scheme for negative flow direction

ϕw=ϕPϕe=ϕE

Rearranging equation (4) gives [(De−Fe)+Dw+(Fe−Fw)]ϕP=DwϕW+(De−Fe)ϕE

Identifying coefficients, aW=DwaE=De−Fe

We can generalize coefficients as[1]: 116 aW=Dw+max⁡(Fw,0)aE=De+max⁡(0,−Fe)

Fig 3: Upwind difference versus central difference

## Use

Solution in the central difference scheme fails to converge for Peclet number greater than 2 which can be overcome by using an upwind scheme to give a reasonable result.[1]: Fig. 5.5, 5.13 Therefore the upwind differencing scheme is applicable for Pe > 2 for positive flow and Pe < −2 for negative flow. For other values of Pe, this scheme doesn’t give effective solution.

## Assessment

Conservativeness[1]: 118(5.6.1.1)

The upwind differencing scheme formulation is conservative.

Boundedness[1]: 118 (5.6.1.2)

As the coefficients of the discretised equation are always positive hence satisfying the requirements for boundedness and also the coefficient matrix is diagonally dominant therefore no irregularities occur in the solution.

Fig 4: Accuracy and false deviation variation with the grid size

Transportiveness[1]: 118\. (5.6.1.3)

Transportiveness is built into the formulation as the scheme already accounts for the flow direction.

Accuracy

Based on the backward differencing formula, the accuracy is only first order on the basis of the Taylor series truncation error. It gives error when flow is not aligned with grid lines. Distribution of transported properties become marked giving diffusion-like appearance, called as the false diffusion. Refinement of grid serves in overcoming the issue of false diffusion. With decrease in the grid size, false diffusion decrease thus increasing the accuracy.

## References

1. ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 Versteeg, H. K.; Malalasekera, W. (2007). An Introduction to Computational Fluid Dynamics: the Finite Volume Method (2nd ed.). Harlow, England: Pearson Education Ltd. ISBN 978-0-13-127498-3. OCLC 76821177. https://www.worldcat.org/oclc/76821177.
2. ↑ Central differencing scheme
3. ↑ Central differencing scheme
4. ↑ Central differencing scheme

## See also

* Central differencing scheme
* Finite difference
* Upwind scheme

0.00

(0 votes)

Original source: https://en.wikipedia.org/wiki/Upwind differencing scheme for convection. Read more

|

Retrieved from "https://handwiki.org/wiki/index.php?title=Upwind_differencing_scheme_for_convection&oldid=216437"