Asphalt

Template:Pp-semi-protected

The term asphalt is often used as an abbreviation for asphalt concrete. For the film, see Asphalt (film); for the novel, see Carl Hancock Rux.

File:Asphalt base.jpgBase layer of asphalt concrete in a road under construction.

Asphalt (Template:Audio-IPA) is a sticky, black and highly viscous liquid or semi-solid that is present in most crude petroleums and in some natural deposits sometimes termed asphaltum. It is most commonly modeled as a colloid, with asphaltenes as the dispersed phase and maltenes as the continuous phase (though there is some disagreement amongst chemists regarding its structure). In U.S. terminology, asphalt (or asphalt cement) is the carefully refined residue from the distillation process of selected crude oils. Outside North America, the product is called bitumen.

The primary use of asphalt (Bitumen) is in road construction, where it is used as the glue or binder for the aggregate particles. The road surfacing material is usually called 'asphalt concrete' in North America or simply 'asphalt' elsewhere. The apparent interchangeability of the words 'asphalt' and 'bitumen' causes confusion outside of the road construction industry despite quite clear definitions within industry circles.

## Contents

* 1 Background
* 2 Known uses
* 2.1 Ancient times
* 2.2 Rolled asphalt concrete
* 2.3 Mastic asphalt
* 2.4 Asphalt emulsion
* 2.5 Mixing with petroleum-contaminated soil
* 2.6 Alternatives
* 3 Etymology
* 4 References
* 5 See also
* 6 External links

## Background

[edit | edit source]

Asphalt or bitumen can sometimes be confused with tar, which is a similar black thermo-plastic material produced by the destructive distillation of coal. During the early and mid twentieth century when town gas was produced, tar was a readily available product and extensively used as the binder for road aggregates. The addition of tar to macadam roads led to the word tarmac, which is now used in common parlance to refer to road making materials. However, since the 1970s, when natural gas succeeded town gas, asphalt (bitumen) has completely overtaken the use of tar in these applications.

Asphalt can be separated from the other components in crude oil (such as naphtha, gasoline and diesel) by the process of fractional distillation, usually under vacuum conditions. A better separation can be achieved by further processing of the heavier fractions of the crude oil in a de-asphalting unit, which uses either propane or butane in a supercritical phase to dissolve the lighter molecules which are then separated. Further processing is possible by "blowing" the product: namely reacting it with oxygen. This makes the product harder and more viscous.

Natural deposits of asphalt include lake asphalts (primarily from the Pitch Lake in Trinidad and Tobago and Bermudez Lake in Venezuela), Gilsonite, the Dead Sea between Israel & Jordan, and Tar Sands.

Asphalt is typically stored and transported at temperatures around 150 degrees Celsius (300 °F). Sometimes diesel oil or kerosene are mixed in before shipping to retain liquidity; upon delivery, these lighter materials are separated out of the mixture. This mixture is often called bitumen feedstock, or BFS. Some dump trucks route the hot engine exhaust through pipes in the dump body to keep the material warm. The backs of tippers carrying asphalt, as well as some handling equipment, are also commonly sprayed with a releasing agent before filling to aid release. Diesel oil is sometimes used as a release agent, although it can mix with and thereby reduce the quality of the asphalt.

## Known uses

[edit | edit source]

### Ancient times

[edit | edit source]

In the ancient Middle East, natural asphalt deposits were used for mortar between bricks and stones, ship caulking, and waterproofing. The Persian word for asphalt is mumiya, which may be related to the English word mummy. Asphalt was also used by ancient Egyptians to embalm mummies.

In the ancient Far East, natural asphalt was slowly boiled to get rid of the higher fractions, leaving a material of higher molecular weight which is thermoplastic and when layered on objects, became quite hard upon cooling. This was used to cover scabbards and other objects that needed water-proofing. Statuettes of household deities were also cast with this type of material in Japan, and probably also in China.Template:Facts

Poured bitumen has also been used as a damp-proof course in building.

### Rolled asphalt concrete

[edit | edit source]

The largest use of asphalt is for making asphalt concrete for road surfaces and accounts for approximately 80% of the asphalt consumed in the United States. Roofing shingles account for most of the remaining asphalt consumption. Other uses include cattle sprays, fence post treatments, and waterproofing for fabrics.

Asphalt road surface is the most widely recycled material in the US, both by gross tonnage and by percentage. According to a report issued by the Federal Highway Administration and the United States Environmental Protection Agency, 80% of the asphalt from road surfaces' that is removed each year during widening and resurfacing projects is reused as part of new roads, roadbeds, shoulders and embankments.

### Mastic asphalt

[edit | edit source]

Mastic asphalt is a type of asphalt which differs from dense graded asphalt (asphalt concrete) in that it has a higher bitumen (binder) content, usually around 7-10% of the whole aggregate mix, as opposed to roller asphalt, which has only around 5% added bitumen. Another asphalt which is fast gaining global popularity is stone mastic asphalt (SMA). SMA's advantages over rolled asphalt is its high anti skid qualities due to its high aggregate density and the lack of void content (air pockets). Another advantage of SMA is its longer durability over alternative road asphalt surfaces, but its manufacture and application, if not controlled closely, can result in slippery road surfaces due to excess bitumen pooling (bleeding) onto the surface.

### Asphalt emulsion

[edit | edit source]

A number of technologies allow asphalt to be mixed at much lower temperatures. These involve mixing the asphalt with petroleum solvents to form "cutbacks" with reduced melting point or mixtures with water to turn the asphalt into an emulsion. Asphalt emulsions contain up to 70% asphalt and typically less than 1.5% chemical additives. There are two main types of emulsions with different affinity for aggregates, cationic and anionic. Asphalt emulsions are used in a wide variety of applications. Chipseal involves spraying the road surface with asphalt emulsion followed by a layer of crushed rock or gravel. Slurry Seal involves the creation of a mixture of asphalt emulsion and fine crushed aggregate that is spread on the surface of a road. Cold mixed asphalt can also be made from asphalt emulsion to create pavements similar to hot-mixed asphalt, several inches in depth and asphalt emulsions are also blended into recycled hot-mix asphalt to create low cost pavements.

### Mixing with petroleum-contaminated soil

[edit | edit source]

Sometimes asphalt can be mixed with the output from low-temperature thermal desorption.

### Alternatives

[edit | edit source]

The world has become increasingly concerned over the global climate change problem in recent years due to the pollution that is released into the atmosphere. Most of the emissions are derived primarily from burning fossil fuels. This has led to the introduction of bitumen alternatives that are more environmentally friendly and non toxic. Bitumen can now be made from non-petroleum based renewable resources such as sugar, molasses and rice, corn and potato starches etc. To further help the environment bitumen can also be made from the waste material vacuum tower bottoms produced in the process of cleaning used motor oils which helps the recycling industries, this waste is normally disposed by burning or dumping into land fills. These new non-petroleum based bitumen binders can be colored, which thereby help reduce the temperatures of road surfaces which contribute to the Urban heat island which in turn contributes to global climate change. For millions of people living in and around cities, heat islands are of growing concern. This phenomenon describes urban and suburban temperatures that are 2 to 10°F (1 to 6°C) hotter than nearby rural areas Elevated temperatures can impact communities by increasing peak energy demand, air conditioning costs, air pollution levels, and heat-related illness and mortality. Fortunately, there are common-sense measures that communities can take to reduce the negative effects of heat islands, such as replacing conventional black asphalt road surfaces with the new pigmentable bitumen that gives lighter colors [1] [2].

Asphalt made with vegetable oil based binders was patented by Colas SA in France in 2004 (Vegecol), Colas was originally owned by the Royal Dutch Shell [3]. [4]

A number of homeowners seeking an environmentally-friendly alternative to asphalt for paving have experimented with waste vegetable oil as a binder for driveways and parking areas in single-family applications. The earliest known test occurred in 2002 in Ohio, where the homeowner combined waste vegetable oil with dry aggregate to create a low-cost and non-polluting paving material for his 200-foot driveway. After five years, he reports the driveway is performing as well or better than petroleum-based materials.

This movement has led the Shell Oil Company (see also, Controversies surrounding Royal Dutch Shell) to pave two public roads in Norway in 2007 with the Colas vegetable-oil-based asphalt. Results of this study are still premature.

## Etymology

[edit | edit source]

File:Wiktionary-logo-en-v2.svg | Look up asphalt in Wiktionary, the free dictionary.

|

The word asphalt is derived from the late Middle English : from French asphalte, based on late Latin asphalton, asphaltum, from Greek asphalton, asphaltos (άσφαλτος), ásphaltos, -on, akin to asphalízein to make firm, to secure.

## References

[edit | edit source]

* Barth, Edwin J., Asphalt: Science and Technology Gordon and Breach (1962). ISBN 0-677-00040-5.

## See also

[edit | edit source]

* Blacktop
* Good Times (it's mentioned in the TV Series Ending Theme Song)

## External links

[edit | edit source]

* Template:ICSC
* U.S EPA
* Vegetable oil based Asphalt Binders
* National Institute for Occupational Safety and Health - Asphalt Fumes

bg:Асфалт ca:Asfalt cs:Asfalt da:Asfalt de:Asphalt el:Άσφαλτος eo:Asfalto et:Asfalt fa:آسفالت fi:Asfaltti gl:Asfalto he:אספלט id:Aspal it:Asfalto ku:Asfalt lt:Asfaltas nl:Asfalt no:Asfalt nn:Asfalt sk:Asfalt sv:Asfalt th:ยางมะตอย uk:Асфальт