Electrical resistance

Template:Electromagnetism3

File:Register.jpgA 750-kΩ resistor, as identified by its electronic color code. An ohmmeter could be used to verify this value.

Electrical resistance is a measure of the degree to which an object opposes an electric current through it, measured in ohms. Its reciprocal quantity is electrical conductance measured in siemens. Assuming a uniform current density, an object's electrical resistance is a function of both its physical geometry and the resistivity of the material it is made from:

<math>R = {l \cdot \rho \over A} \,</math>

where

"l" is the length
"A" is the cross sectional area, and
"ρ" is the resistivity of the material

Electrical resistance shares some conceptual parallels with the mechanical notion of friction. The SI unit of electrical resistance is the ohm, symbol Ω. The resistance of an object determines the amount of current through the object for a given potential difference across the object.

<math>R = \frac{V}{I}</math>

where

R is the resistance of the object, measured in ohms, equivalent to J·s/C2
V is the potential difference across the object, measured in volts
I is the current through the object, measured in amperes

For a wide variety of materials and conditions, the electrical resistance does not depend on the amount of current through or the amount of voltage across the object, meaning that the resistance R is constant.

## Contents

* 1 Resistance of a conductor
* 1.1 DC resistance
* 1.2 AC resistance
* 2 Causes of resistance
* 2.1 In metals
* 2.2 In semiconductors and insulators
* 2.3 In ionic liquids/electrolytes
* 2.4 Resistance of various materials
* 2.5 Band theory simplified
* 3 Differential resistance
* 4 Temperature-dependence
* 5 Measuring resistance
* 6 See also
* 7 References
* 8 External links

## Resistance of a conductor

[edit | edit source]

### DC resistance

[edit | edit source]

As long as the current density is totally uniform in the insulator, the DC resistance R of a conductor of regular cross section can be computed as

<math>R = {l \cdot \rho \over A} \,</math>

where

l is the length of the conductor, measured in meters

A is the cross-sectional area, measured in square meters

ρ (Greek: rho) is the electrical resistivity (also called specific electrical resistance) of the material, measured in ohm · meter. Resistivity is a measure of the material's ability to oppose electric current.

For practical reasons, almost any connections to a real conductor will almost certainly mean the current density is not totally uniform. However, this formula still provides a good approximation for long thin conductors such as wires.

### AC resistance

[edit | edit source]

If a wire conducts high-frequency alternating current then the effective cross sectional area of the wire is reduced because of the skin effect. This causes the wire resistance to increase at a rate of 10dB/decade for wire radius much greater than skin depth.

In a conductor close to others, the actual resistance is higher than that predicted by the skin effect because of the proximity effect.

## Causes of resistance

[edit | edit source]

### In metals

[edit | edit source]

A metal consists of a lattice of atoms, each with a shell of electrons. This can also be known as a positive ionic lattice. The outer electrons are free to dissociate from their parent atoms and travel through the lattice, creating a 'sea' of electrons, making the metal a conductor. When an electrical potential difference (a voltage) is applied across the metal, the electrons drift from one end of the conductor to the other under the influence of the electric field.

Near room temperatures, the thermal motion of ions is the primary source of scattering of electrons (due to destructive interference of free electron wave on non-correlating potentials of ions), and is thus the prime cause of metal resistance. Imperfections of lattice also contribute into resistance, although their contribution in pure metals is negligible.

The larger the cross-sectional area of the conductor, the more electrons are available to carry the current, so the lower the resistance. The longer the conductor, the more scattering events occur in each electron's path through the material, so the higher the resistance. Different materials also affect the resistance.[1]

### In semiconductors and insulators

[edit | edit source]

In metals, the fermi level lies in the conduction band (see Band Theory, below) giving rise to free conduction electrons. However, in semiconductors the position of the fermi level is within the band gap, exactly half way between the conduction band minimum and valence band maximum for intrinsic (undoped) semiconductors. This means that at 0 Kelvin, there are no free conduction electrons and the resistance is infinite. However, the resistance will continue to decrease as the charge carrier density in the conduction band increases. In extrinsic (doped) semiconductors, dopant atoms increase the majority charge carrier by donating electrons to the conduction band or accepting holes in the valence band. For both types of donor or acceptor atoms, increasing the dopant density leads to a reduction in the resistance. Highly doped semiconductors hence behave metallic. At very high temperatures, the contribution of thermally generated carriers will dominate over the contribution from dopant atoms and the resistance will decrease exponentially with temperature.

### In ionic liquids/electrolytes

[edit | edit source]

In electrolytes, electrical conduction happens not by band electrons or holes, but by full atomic species (ions) traveling, each carrying an electrical charge. The resistivity of ionic liquids varies tremendously by the salt concentration - while distilled water is almost an insulator, salt water is a very efficient electrical conductor. In biological membranes, currents are carried by ionic salts. Small holes in the membranes, called ion channels, are selective to specific ions and determine the membrane resistance.

### Resistance of various materials

[edit | edit source]

Material | Resistivity, <math> \rho </math>
ohm-meter

|

Metals | <math>10^{-8}</math>
Semiconductors | variable
Electrolytes | variable
Insulators | <math>10^{16}</math>
Superconductors | 0

### Band theory simplified

[edit | edit source]

File:Resistance band theory insulator.JPGElectron energy levels in an insulator.

Quantum mechanics states that the energy of an electron in an atom cannot be any arbitrary value. Rather, there are fixed energy levels which the electrons can occupy, and values in between these levels are impossible. The energy levels are grouped into two bands: the valence band and the conduction band (the latter is generally above the former). Electrons in the conduction band may move freely throughout the substance in the presence of an electrical field.

In insulators and semiconductors, the atoms in the substance influence each other so that between the valence band and the conduction band there exists a forbidden band of energy levels, which the electrons cannot occupy. In order for a current to flow, a relatively large amount of energy must be furnished to an electron for it to leap across this forbidden gap and into the conduction band. Thus, even large voltages can yield relatively small currents.

## Differential resistance

[edit | edit source]

When resistance may depend on voltage and current, differential resistance, incremental resistance or slope resistance is defined as the slope of the U-I graph at a particular point, thus:

<math>R = \frac {\mathrm{d}U} {\mathrm{d}I} \,</math>

This quantity is sometimes called simply resistance, although the two definitions are equivalent only for an ohmic component such as an ideal resistor. If the U-I graph is not monotonic (i.e. it has a peak or a trough), the differential resistance will be negative for some values of voltage and current. This property is often known as negative resistance, although it is more correctly called negative differential resistance, since the absolute resistance U/I is still positive.

## Temperature-dependence

[edit | edit source]

Near room temperature, the electric resistance of a typical metal varies linearly with the temperature. At lower temperatures (less than the Debye temperature), the resistance decreases as T5 due to the electrons scattering off of phonons. At even lower temperatures, the dominant scattering mechanism for electrons is other electrons, and the resistance decreases as T². At some point, the impurities in the metal will dominate the behavior of the electrical resistance which causes it to saturate to a constant value. Matthiessen's Rule[1][2] says that all of these different behaviors can be summed up to get the total resistance as a function of temperature,

<math>R = R_{imp} + a T^2 + b T^5 + cT \,</math>

where Rimp is the temperature independent electrical resistivity due to impurities, and a, b, and c are coefficients which depend upon the metal's properties.

The electric resistance of a typical intrinsic (non doped) semiconductor decreases exponentially with the temperature:

<math>R= R_0 e^{-aT}\,</math>

Extrinsic (doped) semiconductors have a far more complicated temperature profile. As temperature increases starting from absolute zero they first decrease steeply in resistance as the carriers leave the donors or acceptors. After most of the donors or acceptors have lost their carriers the resistance starts to increase again slightly due to the reducing mobility of carriers (much as in a metal). At higher temperatures it will behave like intrinsic semiconductors as the carriers from the donors/acceptors become insignificant compared to the thermally generated carriers.

The electric resistance of electrolytes and insulators is highly nonlinear, and case by case dependent, therefore no generalized equations are given.

## Measuring resistance

[edit | edit source]

An instrument for measuring resistance is called a resistance meter or ohmmeter. Simple ohmmeters cannot measure low resistances accurately because the resistance of their measuring leads causes a voltage drop that interferes with the measurement, so more accurate devices use four-terminal sensing.

## See also

[edit | edit source]

Template:Portalpar

* Resistor
* Electrical conduction for more information about the physical mechanisms for conduction in materials.
* Ohm's Law
* Voltage divider
* Voltage drop
* Current divider
* Thermal resistance
* Sheet resistance
* Electrical resistivity
* Electrical impedance
* SI electromagnetism units
* Quantum Hall effect, a new standard for measuring resistance.
* Series and parallel circuits
* Proximity effect (electromagnetism)
* Skin effect

## References

[edit | edit source]

1. ↑ A. Matthiessen, Rep. Brit. Ass. 32, 144 (1862)
2. ↑ A. Matthiessen, Progg. Anallen, 122, 47 (1864)

## External links

[edit | edit source]

* Circuits
* Resistance, Reactance, and Impedance
* Calculation: Electrical resistance, voltage, current, and power
* Software for Electrical Resistance

ar:مقاومة كهربائية bg:Електрическо съпротивление ca:Resistència elèctrica (propietat) cs:Elektrický odpor da:Elektrisk resistans de:Elektrischer Widerstand et:Elektritakistus el:Ηλεκτρική αντίσταση eo:Elektra rezistanco eu:Erresistentzia elektriko fa:مقاومت الکتریکی ko:전기저항 hr:Električni otpor io:Elektra rezistiero id:Hambatan listrik is:Rafviðnám it:Resistenza elettrica he:מוליכות חשמלית lv:Elektriskā pretestība lt:Elektrinė varža hu:Elektromos ellenállás ml:വൈദ്യുത പ്രതിരോധം nl:Elektrische weerstand (eigenschap) no:Motstand (resistans) nn:Elektrisk motstand qu:Pinchikilla hark'ay simple:Electrical resistance sk:Elektrický odpor sl:Električni upor sr:Електрични отпор sh:Električni otpor fi:Resistanssi sv:Resistans th:ความต้านทานไฟฟ้า uk:Електричний опір wo:Jànkoonteb mbëj

Template:WH Template:WS