Force field (chemistry)

For other uses, see Force field (disambiguation).

File:Bond stretching energy.pngA force field is used to minimize the bond stretching energy of this ethane molecule.

In the context of molecular mechanics, a force field (also called a forcefield) refers to the functional form and parameter sets used to describe the potential energy of a system of particles (typically but not necessarily atoms). Force field functions and parameter sets are derived from both experimental work and high-level quantum mechanical calculations. "All-atom" force fields provide parameters for every atom in a system, including hydrogen, while "united-atom" force fields treat the hydrogen and carbon atoms in methyl and methylene groups as a single interaction center. "Coarse-grained" force fields, which are frequently used in long-time simulations of proteins, provide even more abstracted representations for increased computational efficiency.

The usage of the term "force field" in chemistry and computational biology differs from the standard usage in physics. In chemistry usage a force field is defined as a potential function, while the term is used in physics to denote the negative gradient of a scalar potential.

## Contents

* 1 Functional form
* 2 Parameterization
* 3 Deficiencies
* 4 Popular force fields
* 4.1 Classical force fields
* 4.2 Second-generation force fields
* 4.3 Polarizable force field based on induced dipole
* 4.4 Polarizable Force Fields based on point charges
* 4.5 Polarizable Force Fields based on distributed multipoles
* 4.6 Polarizable Force Fields based on density
* 4.7 Reactive Force Fields
* 4.8 Other
* 4.9 Water Models
* 5 See also
* 6 References
* 7 Further reading

## Functional form

[edit | edit source]

Further information: [[:Molecular mechanics]]

File:MM PEF.pngMolecular mechanics potential energy function with continuum solvent.

The basic functional form of a force field encapsulates both bonded terms relating to atoms that are linked by covalent bonds, and nonbonded (also called "noncovalent") terms describing the long-range electrostatic and van der Waals forces. The specific decomposition of the terms depends on the force field, but a general form for the total energy in an additive force field can be written as <math>\ E_{total} = E_{bonded} + E_{nonbonded} </math> where the components of the covalent and noncovalent contributions are given by the following summations:

<math>\ E_{bonded} = E_{bond} + E_{angle} + E_{dihedral}</math>

<math>\ E_{nonbonded} = E_{electrostatic} + E_{van der Waals} </math>

The bond and angle terms are usually modeled as harmonic oscillators in force fields that do not allow bond breaking. A more realistic description of a covalent bond at higher stretching is provided by the more expensive Morse potential. The functional form for the rest of the bonded terms is highly variable. Proper dihedral potentials are usually included. Additionally, "improper torsional" terms may be added to enforce the planarity of aromatic rings and other conjugated systems, and "cross-terms" that describe coupling of different internal variables, such as angles and bond lengths. Some force fields also include explicit terms for hydrogen bonds.

The nonbonded terms are most computationally intensive because they include many more interactions per atom. A popular choice is to limit interactions to pairwise energies. The van der Waals term is usually computed with a Lennard-Jones potential and the electrostatic term with Coulomb's law, although both can be buffered or scaled by a constant factor to account for electronic polarizability  and produce better agreement with experimental observations.

## Parameterization

[edit | edit source]

In addition to the functional form of the potentials, a force field defines a set of parameters for each type of atom. For example, a force field would include distinct parameters for an oxygen atom in a carbonyl functional group and in a hydroxyl group. The typical parameter set includes values for atomic mass, van der Waals radius, and partial charge for individual atoms, and equilibrium values of bond lengths, bond angles, and dihedral angles for pairs, triplets, and quandruplets of bonded atoms, and values corresponding to the effective spring constant for each potential. Most current force fields use a "fixed-charge" model by which each atom is assigned a single value for the atomic charge that is not affected by the local electrostatic environment; proposed developments in next-generation force fields incorporate models for polarizability, in which a particle's charge is influenced by electrostatic interactions with its neighbors. For example, polarizability can be approximated by the introduction of induced dipoles; it can also be represented by Drude particles, or massless, charge-carrying virtual sites attached by a springlike harmonic potential to each polarizable atom. The introduction of polarizability into force fields in common use has been inhibited by the high computational expense associated with calculating the local electrostatic field.

Although many molecular simulations involve biological macromolecules such as proteins, DNA, and RNA, the parameters for given atom types are generally derived from observations on small organic molecules that are more tractable for experimental studies and quantum calculations. Different force fields can be derived from dissimilar types of experimental data, such as enthalpy of vaporization (OPLS), enthalpy of sublimation (CFF), dipole moments, or various spectroscopic parameters (CFF).

Parameter sets and functional forms are defined by force field developers to be self-consistent. Because the functional forms of the potential terms vary extensively between even closely related force fields (or successive versions of the same force field), the parameters from one force field should never be used in conjunction with the potential from another.

## Deficiencies

[edit | edit source]

All force fields are based on numerous approximations and derived from different types of experimental data. Therefore they are called empirical. Some existing force fields usually do not account for electronic polarization of the environment, an effect that can significantly reduce electrostatic interactions of partial atomic charges. This problem was addressed by developing “polarizable force fields” [1] [2] or using macroscopic dielectric constant. However, application of a single value of dielectric constant is questionable in the highly heterogeneous environments of proteins or biological membranes, and the nature of the dielectric depends on the model used [3].

All types of van der Waals forces are also strongly environment-dependent, because these forces originate from interactions of induced and “instantaneous” dipoles (see Intermolecular force). The original Fritz London theory of these forces can only be applied in vacuum. A more general theory of van der Waals forces in condensed media was developed by A. D. McLachlan in 1963 (this theory includes the original London’s approach as a special case) [4]. The McLachlan theory predicts that van der Waals attractions in media are weaker than in vacuum and follow the "like dissolves like" rule, which means that different types of atoms interact more weakly than identical types of atoms. [5]. This is in contrast to “combinatorial rules” or Slater-Kirkwood equation applied for development of the classical force fields. The “combinatorial rules” state that interaction energy of two dissimilar atoms (e.g. C…N) is an average of the interaction energies of corresponding identical atom pairs (i.e. C…C and N…N). According to McLachlan theory, the interactions of particles in a media can even be completely repulsive, as observed for liquid helium [4]. The conclusions of McLachlan theory are supported by direct measurements of attraction forces between different materials (Hamaker constant), as explained by Jacob Israelachvili in his book "Intermolecular and surface forces". It was concluded that "the interaction between hydrocarbons across water is about 10% of that across vacuum" [4]. Such effects are unaccounted in the standard molecular mechanics.

Another round of criticism came from practical applications, such as protein structure refinement. It was noted that CASP participants did not try to refine their models to avoid "a central embarrassment of molecular mechanics, namely that energy minimization or molecular dynamics generally leads to a model that is less like the experimental structure". [6] Actually, the force fields have been successfully applied for protein structure refinement in different X-ray crystallography and NMR spectroscopy applications, especially using program XPLOR [7]. However, such refinement is driven primarily by a set of experimental constraints, whereas the force fields serve merely to remove interatomic hindrances. The results of calculations are practically the same with rigid sphere potentials implemented in program DYANA [8] (calculations from NMR data), or with programs for crystallographic refinement that do not use any energy functions. The deficiencies of the force fields remain a major bottleneck in homology modeling of proteins [9]. Such situation gave rise to development of alternative empirical scoring functions specifically for ligand docking [10], protein folding [11] [12] [13], computational protein design [14] [15] [16], and modeling of proteins in membranes [17].

There is also an opinion that molecular mechanics may operate with energy which is irrelevant to protein folding or ligand binding [18]. The parameters of typical force fields reproduce enthalpy of sublimation, i.e. energy of evaporation of molecular crystals. However, it was recognized that protein folding and ligand binding are thermodynamically very similar to crystallization, or liquid-solid transitions, because all these processes represent “freezing” of mobile molecules in condensed media [19] [20] [21]. Therefore, free energy changes during protein folding or ligand binding are expected to represent a combination of an energy similar to heat of fusion (energy absorbed during melting of molecular crystals), a conformational entropy contribution, and solvation free energy. The heat of fusion is significantly smaller than enthalpy of sublimation [4]. Hence, the potentials describing protein folding or ligand binding must be weaker than potentials in molecular mechanics. Indeed, the energies of H-bonds in proteins are ~ -1.5 kcal/mol when estimated from protein engineering or alpha helix to coil transition data [22] [23], but the same energies estimated from sublimation enthalpy of molecular crystals were -4 to -6 kcal/mol [24]. The depths of modified Lennard-Jones potentials derived from protein engineering data were also smaller than in typical force fields and followed the “like dissolves like” rule, as predicted by McLachlan theory [18].

## Popular force fields

[edit | edit source]

Different force fields are designed for different purposes.

MM2 was developed primarily for conformational analysis of small organic molecules. It is designed to reproduce the equilibrium covalent geometry of molecules as precisely as possible. It implements a large set of parameters that is continuously refined and updated for many different classes of organic compounds (MM3 and MM4).

CFF was developed by Warshel, Lifson and coworkers as a general method for unifying studies of energies, structures and vibration of general molecules and molecular crystals. The CFF program, developed by Levitt and Warshel, is based on the Cartesian representation of all the atoms, and it served as the basis for many subsequent simulation programs.

ECEPP was developed specifically for modeling of peptides and proteins. It uses fixed geometries of amino acid residues to simplify the potential energy surface. Thus, the energy minimization is conducted in the space of protein torsion angles. Both MM2 and ECEPP include potentials for H-bonds and torsion potentials for describing rotations around single bonds. ECEPP/3 was implemented (with some modifications) in Internal Coordinate Mechanics and FANTOM [25].

AMBER, CHARMM and GROMOS have been developed primarily for molecular dynamics of macromolecules, although they are also commonly applied for energy minimization. Therefore, the coordinates of all atoms are considered as free variables.

### Classical force fields

[edit | edit source]

* AMBER (Assisted Model Building and Energy Refinement) - widely used for proteins and DNA
* CHARMM \- originally developed at Harvard, widely used for both small molecules and macromolecules
* CHARMm \- commercial version of CHARMM, available through Accelrys
* CVFF \- also broadly used for small molecules and macromolecules
* GROMACS \- The force field optimized for the package of the same name
* GROMOS \- A force field that comes as part of the GROMOS (GROningen MOlecular Simulation package), a general-purpose molecular dynamics computer simulation package for the study of biomolecular systems. GROMOS force field (A-version) has been developed for application to aqueous or apolar solutions of proteins, nucleotides and sugars. However, a gas phase version (B-version) for simulation of isolated molecules is also available
* OPLS-AA, OPLS-UA, OPLS-2001, OPLS-2005 - Members of the OPLS family of force fields developed by William L. Jorgensen at the Yale University Department of Chemistry.
* ENZYMIX – A general polarizable force field for modeling chemical reactions in biological molecules. This force field is implemented with the empirical valence bond (EVB) method and is also combined with the semimacroscopic PDLD approach in the program in the MOLARIS package.
* ECEPP/2 \- First force field for polypeptide molecules - developed by F.A.Momany, H.A.Scheraga and colleagues.
* QCFF/PI – A general force field for conjugated molecules. [26]. [27]

### Second-generation force fields

[edit | edit source]

* CFF \- a family of forcefields adapted to a broad variety of organic compounds, includes forcefields for polymers, metals, etc.
* MMFF \- developed at Merck, for a broad range of chemicals
* MM2, MM3, MM4 \- developed by Norman L. Allinger, for a broad range of chemicals

### Polarizable force field based on induced dipole

[edit | edit source]

* -CFF/ind and ENZYMIX – The first polarizable force field [28] which has subsequently been used in many applications to biological systems.[2].

### Polarizable Force Fields based on point charges

[edit | edit source]

* \- PFF (Polarizable Force Field) developed by Richard A. Friesner and coworkers
* \- DRF90 developed by P. Th. van Duijnen and coworkers.
* \- SP-basis Chemical Potential Equalization (CPE) approach developed by R. Chelli and P. Procacci
* \- CHARMM polarizable force field developed by B. Brooks and coworkers.
* \- AMBER polarizable force field developed by Jim Caldwell and coworkers.

### Polarizable Force Fields based on distributed multipoles

[edit | edit source]

* \- The SIBFA (Sum of Interactions Between Fragments Ab initio computed) force field [29] for small molecules and flexible proteins, developed by Nohad Gresh (Paris V, René Descartes University) and Jean-Philip Piquemal (Paris VI, Pierre & Marie Curie University). SIBFA is a molecular mechanics procedure formulated and calibrated on the basis of ab initio supermolecule computations. Its purpose is to enable the simultaneous and reliable computations of both intermolecular and conformational energies governing the binding specificities of biologically and pharmacologically relevant molecules. This procedure enables an accurate treatment of transition metals. The inclusion of a ligand field contribution allows computations on "open-shell" metalloproteins.
* \- AMOEBA force field. developed by Pengyu Ren (University of Texas at Austin) and Jay W. Ponder (Washington University).
* \- ORIENT procedure developed by Anthony J. Stone (Cambridge University) and coworkers.
* \- Non-Empirical Molecular Orbital (NEMO) procedure developed by Gunnar Karlström and coworkers at Lund University (Sweden).

### Polarizable Force Fields based on density

[edit | edit source]

* \- Gaussian Electrostatic Model (GEM)[29][30][31], a polarizable force field based on Density Fitting developed by Thomas A. Darden and G. Andrés Cisneros at NIEHS; and Jean-Philip Piquemal (Paris VI University).
* \- Polarizable procedure based on the Kim-Gordon approach developed by Jürg Hutter and coworkers (University of Zurick)

### Reactive Force Fields

[edit | edit source]

* ReaxFF \- reactive force field developed by Adri van Duin, William Goddard and coworkers. It is fast, transferable and is the computational method of choice for atomistic-scale dynamical simulations of chemical reactions.
* EVB (empirical valence bond) – This reactive force field, introduced by Warshel and coworkers, is probably the most reliable and physically consistent way of using force fields in modeling chemical reactions in different environments. The EVB facilitates calculations of actual activation free energies in condensed phases and in enzymes.

### Other

[edit | edit source]

* VALBOND \- a function for angle bending that is based on valence bond theory and works for large angular distortions, hypervalent molecules, and transition metal complexes. It can be incorporated into other force fields such as CHARMM and UFF.

### Water Models

[edit | edit source]

Main article: water model

The set of parameters used to model water or aqueous solutions (basically a force field for water) is called a water model. Water has attracted a great deal of attention due to its unusual properties and its importance as a solvent. Many water models have been proposed; some examples are TIP3P, TIP4P, SPC, and ST2.

## See also

[edit | edit source]

* Comparisons and Evaluations of various forcefields
* Molecular dynamics
* Molecular modelling
* Molecular model construction with proper Force field association. (AGM Build)

## References

[edit | edit source]

1. ↑ Ponder JW and Case DA. (2003) Force fields for protein simulations. Adv. Prot. Chem. 66: 27-85.
2. ↑ 2.0 2.1 Warshel A, Sharma PK, Kato M and Parson WW (2006) Modeling Electrostatic Effects in Proteins. Biochim. Biophys. Acta 1764:1647-1676.
3. ↑ Schutz CN. and Warshel A. 2001. What are the dielectric "constants" of proteins and how to validate electrostatic models? Proteins 44: 400-417.
4. ↑ 4.0 4.1 4.2 4.3 Israelachvili, J.N. 1992. Intermolecular and surface forces. Academic Press, San Diego.
5. ↑ Leckband, D. and Israelachvili, J. (2001) Intermolecular forces in biology. Quart. Rev. Biophys. 34: 105-267.
6. ↑ Koehl P. and Levitt M. (1999) A brighter future for protein structure prediction. Nature Struct. Biol. 6: 108-111.
7. ↑ Brunger AT and Adams PD. (2002) Molecular dynamics applied to X-ray structure refinement. Acc. Chem. Res. 35: 404-412.
8. ↑ Guntert P. (1998) Structure calculation of biological macromolecules from NMR data. Quart. Rev. Biophys. 31: 145-237.
9. ↑ Tramontano A. and Morea V. 2003. Assessment of homology-based predictions in CASP5. Proteins. 53: 352-368.
10. ↑ Gohlke H. and Klebe G. (2002) Approaches to the description and prediction of the binding affinity of small-molecule ligands to macromolecular receptors. Angew. Chem. Internat. Ed. 41: 2644-2676.
11. ↑ Edgcomb SP. and Murphy KP. (2000) Structural energetics of protein folding and binding. Current Op. Biotechnol. 11: 62-66.
12. ↑ Lazaridis T. and Karplus (2000) Effective energy functions for protein structure prediction. Curr. Op. Struct. Biol. 10: 139-145
13. ↑ Levitt M. and Warshel A. (1975) Computer Simulations of Protein Folding, Nature 253: 694-698
14. ↑ Gordon DB, Marshall SA, and Mayo SL (1999) Energy functions for protein design. Curr. Op. Struct. Biol. 9: 509-513.
15. ↑ Mendes J., Guerois R, and Serrano L (2002) Energy estimation in protein design. Curr. Op. Struct. Biol. 12: 441-446.
16. ↑ Rohl CA, Strauss CEM, Misura KMS, and Baker D. (2004) Protein structure prediction using Rosetta. Meth. Enz. 383: 66-93.
17. ↑ Lomize AL, Pogozheva ID, Lomize MA, Mosberg HI (2006) Positioning of proteins in membranes: A computational approach. Protein Sci. 15, 1318-1333.
18. ↑ 18.0 18.1 Lomize A.L., Reibarkh M.Y. and Pogozheva I.D. (2002) Interatomic potentials and solvation parameters from protein engineering data for buried residues. Protein Sci., 11:1984-2000.
19. ↑ Murphy K.P. and Gill S.J. 1991. Solid model compounds and the thermodynamics of protein unfolding. J. Mol. Biol., 222: 699-709.
20. ↑ Shakhnovich, E.I. and Finkelstein, A.V. (1989) Theory of cooperative transitions in protein molecules. I. Why denaturation of globular proteins is a first-order phase transition. Biopolymers 28: 1667-1680.
21. ↑ Graziano, G., Catanzano, F., Del Vecchio, P., Giancola, C., and Barone, G. (1996) Thermodynamic stability of globular proteins: a reliable model from small molecule studies. Gazetta Chim. Italiana 126: 559-567.
22. ↑ Myers J.K. and Pace C.N. (1996) Hydrogen bonding stabilizes globular proteins, Biophys. J. 71: 2033-2039.
23. ↑ Scholtz J.M., Marqusee S., Baldwin R.L., York E.J., Stewart J.M., Santoro M., and Bolen D.W. (1991) Calorimetric determination of the enthalpy change for the alpha-helix to coil transition of an alanine peptide in water. Proc. Natl. Acad. Sci. USA 88: 2854-2858.
24. ↑ Gavezotti A. and Filippini G. (1994) Geometry of intermolecular X-H...Y (X,Y=N,O) hydrogen bond and the calibration of empirical hydrogen-bond potentials. J. Phys. Chem. 98: 4831-4837.
25. ↑ Schaumann, T., Braun, W. and Wutrich, K. (1990) The program FANTOM for energy refinement of polypeptides and proteins using a Newton-Raphson minimizer in torsion angle space. Biopolymers 29: 679-694.
26. ↑ Warshel A (1973). Quantum Mechanical Consistent Force Field (QCFF/PI) Method: Calculations of Energies, Conformations and Vibronic Interactions of Ground and Excited States of Conjugated Molecules, Israel J. Chem. 11: 709.
27. ↑ Warshel A and Levitt M (1974). QCFF/PI: A Program for the Consistent Force Field Evaluation of Equilibrium Geometries and Vibrational Frequencies of Molecules, QCPE 247, Quantum Chemistry Program Exchange, Indiana University.
28. ↑ Warshel A. and Levitt M. (1976) Theoretical Studies of Enzymatic Reactions: Dielectric Electrostatic and Steric Stabilization of the Carbonium Ion in the Reaction of Lysozyme, J. Mol. Biol. 103: 227-249
29. ↑ 29.0 29.1 N. Gresh, G. A. Cisneros, T. A. Darden and J-P Piquemal(2007) Anisotropic, polarizable molecular mechanics studies of inter-, intra-molecular interactions, and ligand-macromolecule complexes. A bottom-up strategy, J. Chem. Theory. Comput. 3: 1960
30. ↑ J.-P. Piquemal, G. A. Cisneros, P. Reinhardt, N. Gresh and T. A. Darden (2006), Towards a a Force Field based on Density Fitting., J. Chem. Phys. 124: 104101
31. ↑ G. A. Cisneros, J-P. Piquemal and T. A. Darden (2006), Generalization of the Gaussian Electrostatic Model: extension to arbitrary angular momentum, distributed multipoles and speedup with reciprocal space methods, J. Chem. Phys. 125:184101

## Further reading

[edit | edit source]

1. Schlick T. (2000). Molecular Modeling and Simulation: An Interdisciplinary Guide Interdisciplinary Applied Mathematics: Mathematical Biology. Springer-Verlag New York, NY.
2. Israelachvili, J.N. (1992) Intermolecular and surface forces. Academic Press, San Diego.
3. Warshel A (1991). "Computer Modeling of Chemical Reactions in Enzymes and Solutions" John Wiley & Sons New York.

it:Force field nl:Krachtveld

Template:WS