Superconductivity

Editor-In-Chief: C. Michael Gibson, M.S., M.D. [1]

A magnet levitating above a high-temperature superconductor, cooled with liquid nitrogen. Persistent electric current flows on the surface of the superconductor, acting to exclude the magnetic field of the magnet (the Meissner effect). This current effectively forms an electromagnet that repels the magnet.

Superconductivity is a phenomenon occurring in certain materials generally at very low temperatures, characterized by exactly zero electrical resistance and the exclusion of the interior magnetic field (the Meissner effect). It was discovered by Heike Kamerlingh Onnes in 1911. Like ferromagnetism and atomic spectral lines, superconductivity is a quantum mechanical phenomenon. It cannot be understood simply as the idealization of perfect conductivity" in classical physics.

The electrical resistivity of a metallic conductor decreases gradually as the temperature is lowered. However, in ordinary conductors such as copper and silver, impurities and other defects impose a lower limit. Even near absolute zero a real sample of copper shows a non-zero resistance. The resistance of a superconductor, despite these imperfections, drops abruptly to zero when the material is cooled below its "critical temperature". An electric current flowing in a loop of superconducting wire can persist indefinitely with no power source. [1]

Superconductivity occurs in a wide variety of materials, including simple elements like tin and aluminium, various metallic alloys and some heavily-doped semiconductors. Superconductivity does not occur in noble metals like gold and silver, nor in pure samples of ferromagnetic metals.

In 1986 the discovery of a family of cuprate-perovskite ceramic materials known as high-temperature superconductors, with critical temperatures in excess of 90 kelvin, spurred renewed interest and research in superconductivity for several reasons. As a topic of pure research, these materials represented a new phenomenon not explained by the current theory. In addition, because the superconducting state persists up to more manageable temperatures, past the economically-important boiling point of liquid nitrogen (77 kelvin), more commercial applications are feasible, especially if materials with even higher critical temperatures could be discovered.

## Contents

* 1 Elementary properties of superconductors
* 1.1 Zero electrical "dc" resistance
* 1.2 Superconducting phase transition
* 1.3 Meissner effect
* 1.4 London moment
* 2 Theories of superconductivity
* 3 Classification
* 4 Applications
* 5 See also
* 6 Notes
* 7 References
* 8 External links

## Elementary properties of superconductors

[edit | edit source]

Most of the physical properties of superconductors vary from material to material, such as the heat capacity and the critical temperature, critical field, and critical current density at which superconductivity is destroyed.

On the other hand, there is a class of properties that are independent of the underlying material. For instance, all superconductors have exactly zero resistivity to low applied currents when there is no magnetic field present. The existence of these "universal" properties implies that superconductivity is a thermodynamic phase, and thus possess certain distinguishing properties which are largely independent of microscopic details.

### Zero electrical "dc" resistance

[edit | edit source]

The simplest method to measure the electrical resistance of a sample of some material is to place it in an electrical circuit in series with a current source I and measure the resulting voltage V across the sample. The resistance of the sample is given by Ohm's law as <math>R = \frac{V}{I}</math>. If the voltage is zero, this means that the resistance is zero and that the sample is in the superconducting state.

Superconductors are also able to maintain a current with no applied voltage whatsoever, a property exploited in superconducting electromagnets such as those found in MRI machines. Experiments have demonstrated that currents in superconducting coils can persist for years without any measurable degradation. Experimental evidence points to a current lifetime of at least 100,000 years. Theoretical estimates for the lifetime of a persistent current can exceed the estimated lifetime of the universe, depending on the wire geometry and the temperature. Thus, a superconductor does not have exactly zero resistance, however, the resistance is negligibly small. [1]

In a normal conductor, an electrical current may be visualized as a fluid of electrons moving across a heavy ionic lattice. The electrons are constantly colliding with the ions in the lattice, and during each collision some of the energy carried by the current is absorbed by the lattice and converted into heat, which is essentially the vibrational kinetic energy of the lattice ions. As a result, the energy carried by the current is constantly being dissipated. This is the phenomenon of electrical resistance.

The situation is different in a superconductor. In a conventional superconductor, the electronic fluid cannot be resolved into individual electrons. Instead, it consists of bound pairs of electrons known as Cooper pairs. This pairing is caused by an attractive force between electrons from the exchange of phonons. Due to quantum mechanics, the energy spectrum of this Cooper pair fluid possesses an energy gap, meaning there is a minimum amount of energy ΔE that must be supplied in order to excite the fluid. Therefore, if ΔE is larger than the thermal energy of the lattice, given by kT, where k is Boltzmann's constant and T is the temperature, the fluid will not be scattered by the lattice. The Cooper pair fluid is thus a superfluid, meaning it can flow without energy dissipation.

In a class of superconductors known as Type II superconductors, including all known high-temperature superconductors, an extremely small amount of resistivity appears at temperatures not too far below the nominal superconducting transition when an electrical current is applied in conjunction with a strong magnetic field, which may be caused by the electrical current. This is due to the motion of vortices in the electronic superfluid, which dissipates some of the energy carried by the current. If the current is sufficiently small, the vortices are stationary, and the resistivity vanishes. The resistance due to this effect is tiny compared with that of non-superconducting materials, but must be taken into account in sensitive experiments. However, as the temperature decreases far enough below the nominal superconducting transition, these vortices can become frozen into a disordered but stationary phase known as a "vortex glass". Below this vortex glass transition temperature, the resistance of the material becomes truly zero.

### Superconducting phase transition

[edit | edit source]

File:Cvandrhovst.pngBehavior of heat capacity (cv, blue) and resistivity (ρ, green) at the superconducting phase transition

In superconducting materials, the characteristics of superconductivity appear when the temperature T is lowered below a critical temperature Tc. The value of this critical temperature varies from material to material. Conventional superconductors usually have critical temperatures ranging from around 20 K (kelvins) to less than 1 K. Solid mercury, for example, has a critical temperature of 4.2 K. As of 2001, the highest critical temperature found for a conventional superconductor is 39 K for magnesium diboride (MgB2)[2], although this material displays enough exotic properties that there is doubt about classifying it as a "conventional" superconductor. Cuprate superconductors can have much higher critical temperatures: YBa2Cu3O7, one of the first cuprate superconductors to be discovered, has a critical temperature of 92 K, and mercury-based cuprates have been found with critical temperatures in excess of 130 K. The explanation for these high critical temperatures remains unknown. Electron pairing due to phonon exchanges explains superconductivity in conventional superconductors, but it does not explain superconductivity in the newer superconductors that have a very high critical temperature.

Similarly, at a fixed temperature below the critical temperature, superconducting materials cease to superconduct when an external magnetic field is applied which is greater than the critical magnetic field. This is because the Gibbs free energy of the superconducting phase increases quadratically with the magnetic field while the free energy of the normal phase is roughly independent of the magnetic field. If the material superconducts in the absence of a field, then the superconducting phase free energy is lower than that of the normal phase and so for some finite value of the magnetic field (proportional to the square root of the difference of the free energies at zero magnetic field) the two free energies will be equal and a phase transition to the normal phase will occur. More generally, a higher temperature and a stronger magnetic field lead to a smaller fraction of the electrons in the superconducting band and consequently a longer London penetration depth of external magnetic fields and currents. The penetration depth becomes infinite at the phase transition.

The onset of superconductivity is accompanied by abrupt changes in various physical properties, which is the hallmark of a phase transition. For example, the electronic heat capacity is proportional to the temperature in the normal (non-superconducting) regime. At the superconducting transition, it suffers a discontinuous jump and thereafter ceases to be linear. At low temperatures, it varies instead as e−α /T for some constant α. This exponential behavior is one of the pieces of evidence for the existence of the energy gap.

The order of the superconducting phase transition was long a matter of debate. Experiments indicate that the transition is second-order, meaning there is no latent heat. However in the presence of an external magnetic field there is latent heat, as a result of the fact that the superconducting phase has a lower entropy below the critical temperature than the normal phase. It has experimentally demonstrated [3] that, as a consequence, when the magnetic field is increased beyond the critical field, the resulting phase transition leads to a decrease in the temperature of the superconducting material.

Calculations in the 1970s suggested that it may actually be weakly first-order due to the effect of long-range fluctuations in the electromagnetic field. In the 1980s it was shown theoretically with the help of a disorder field theory, in which the vortex lines of the superconductor play a major role, that the transition is of second order within the type II regime and of first order (i.e., latent heat) within the type I regime, and that the two regions are separated by a tricritical point [4]. The results were confirmed by Monte Carlo computer simulations in Ref. [5]

### Meissner effect

[edit | edit source]

When a superconductor is placed in a weak external magnetic field H, the field penetrates the superconductor only a small distance λ, called the London penetration depth, decaying exponentially to zero within the bulk of the material. This is called the Meissner effect, and is a defining characteristic of superconductivity. For most superconductors, the London penetration depth is on the order of 100 nm.

The Meissner effect is sometimes confused with the kind of diamagnetism one would expect in a perfect electrical conductor: according to Lenz's law, when a changing magnetic field is applied to a conductor, it will induce an electrical current in the conductor that creates an opposing magnetic field. In a perfect conductor, an arbitrarily large current can be induced, and the resulting magnetic field exactly cancels the applied field.

The Meissner effect is distinct from this because a superconductor expels all magnetic fields, not just those that are changing. Suppose we have a material in its normal state, containing a constant internal magnetic field. When the material is cooled below the critical temperature, we would observe the abrupt expulsion of the internal magnetic field, which we would not expect based on Lenz's law.

The Meissner effect was explained by the brothers Fritz and Heinz London, who showed that the electromagnetic free energy in a superconductor is minimized provided

<math> \nabla^2\mathbf{H} = \lambda^{-2} \mathbf{H}\, </math>

where H is the magnetic field and λ is the London penetration depth.

This equation, which is known as the London equation, predicts that the magnetic field in a superconductor decays exponentially from whatever value it possesses at the surface.

The Meissner effect breaks down when the applied magnetic field is too large. Superconductors can be divided into two classes according to how this breakdown occurs. In Type I superconductors, superconductivity is abruptly destroyed when the strength of the applied field rises above a critical value Hc. Depending on the geometry of the sample, one may obtain an intermediate state consisting of regions of normal material carrying a magnetic field mixed with regions of superconducting material containing no field. In Type II superconductors, raising the applied field past a critical value Hc1 leads to a mixed state in which an increasing amount of magnetic flux penetrates the material, but there remains no resistance to the flow of electrical current as long as the current is not too large. At a second critical field strength Hc2, superconductivity is destroyed. The mixed state is actually caused by vortices in the electronic superfluid, sometimes called fluxons because the flux carried by these vortices is quantized. Most pure elemental superconductors, except niobium, technetium, vanadium and carbon nanotubes, are Type I, while almost all impure and compound superconductors are Type II.

### London moment

[edit | edit source]

Conversely, a spinning superconductor generates a magnetic field, precisely aligned with the spin axis. The effect, the London moment, was put to good use in Gravity Probe B. This experiment measured the magnetic fields of four superconducting gyroscopes to determine their spin axes. This was critical to the experiment since it is one of the few ways to accurately determine the spin axis of an otherwise featureless sphere.

## Theories of superconductivity

[edit | edit source]

Since discovery of superconductivity, great efforts have been devoted to finding out how and why it works. During the 1950s, theoretical condensed matter physicists arrived at a solid understanding of "conventional" superconductivity, through a pair of remarkable and important theories: the phenomenological Ginzburg-Landau theory (1950) and the microscopic BCS theory (1957)[6][7]. Generalizations of these theories form the basis for understanding the closely related phenomenon of superfluidity, because they fall into the Lambda transition universality class, but the extent to which similar generalizations can be applied to unconventional superconductors as well is still controversial. The four-dimensional extension of the Ginzburg-Landau theory, the Coleman-Weinberg model, is important in quantum field theory and cosmology.

## Classification

[edit | edit source]

There is not just one criterion to classify superconductors. The most common are:

* By their physical properties: they can be Type I (if their phase transition is of first order) or Type II (if their phase transition is of second order).
* By the theory to explain them: they can be conventional (if they are explained by the BCS theory or its derivatives) or unconventional (if not).
* By their critical temperature: they can be high temperature (generally considered if they reach the superconducting state just cooling them with liquid nitrogen, that is, if Tc > 77 K), or low temperature (generally if they need other techniques to be cooled under their critical temperature).
* By material: they can be chemical elements (as mercury or lead), alloys (as niobium-titanium or germanium-niobium), ceramics (as YBCO or the magnesium diboride), or organic superconductors (as fullerenes or carbon nanotubes, which technically might be included between the chemical elements as they are made of carbon).

## Applications

[edit | edit source]

File:Flyingsuperconductor.oggVideo of superconducting levitation of YBCO

Superconducting magnets are some of the most powerful electromagnets known. They are used in MRI and NMR machines, mass spectrometers, and the beam-steering magnets used in particle accelerators. They can also be used for magnetic separation, where weakly magnetic particles are extracted from a background of less or non-magnetic particles, as in the pigment industries.

Superconductors have also been used to make digital circuits (e.g. based on the Rapid Single Flux Quantum technology) and RF and microwave filters for mobile phone base stations.

Superconductors are used to build Josephson junctions which are the building blocks of SQUIDs (superconducting quantum interference devices), the most sensitive magnetometers known. SQUIDs are used in Scanning SQUID microscopes. Series of Josephson devices are used to define the SI volt. Depending on the particular mode of operation, a Josephson junction can be used as a photon detector or as a mixer. The large resistance change at the transition from the normal- to the superconducting state is used to build thermometers in cryogenic micro-calorimeter photon detectors.

Other early markets are arising where the relative efficiency, size and weight advantages of devices based on high-temperature superconductivity outweigh the additional costs involved.

Promising future applications include high-performance Smart Grid electric power transmission, transformers, power storage devices, electric motors (e.g. for vehicle propulsion, as in vactrains or maglev trains), magnetic levitation devices, Fault Current Limiters, nanoscopic materials such as buckyballs, nanotubes, composite materials, and superconducting magnetic refrigeration. However, superconductivity is sensitive to moving magnetic fields so applications that use alternating current (e.g. transformers) will be more difficult to develop than those that rely upon direct current.

Finding a cost effective room-temperature superconductor has been an elusive dream of superconductivity research scientists for generations. IF such materials could be developed in the future, they might revolutionize our understanding and use of nearly everything that is electric.

## See also

[edit | edit source]

* Charge transfer complex
* High-temperature superconductivity
* Spallation Neutron Source
* Unconventional superconductor

## Notes

[edit | edit source]

1. ↑ 1.0 1.1 SQUIDS, the Josephson Effects and Superconducting Electronics, John C. Gallop, CRC Press, 1990, pg. 20. ISBN 0750300515
2. ↑ A theory to explain superconductivity in MgB2. Berkeley Lab News (August 2002)
3. ↑ R.L. Dolecek (1954). "Adiabatic Magnetization of a Superconducting Sphere". Phys.Rev. 96: 25–28. doi:10.1103/PhysRev.96.25. External link in `|title=` (help)
4. ↑ H. Kleinert (1982). "Disorder Version of the Abelian Higgs Model and the Order of the Superconductive Phase Transition" (PDF). Lett. Nuovo Cimento. 35: 405–412. doi:10.1007/BF02754760.
5. ↑ J. Hove,S. Mo, A. Sudbo (2002). "Vortex interactions and thermally induced crossover from type-I to type-II superconductivity" (PDF). Phys. Rev. B 66: 064524. doi:10.1103/PhysRevB.66.064524.CS1 maint: Multiple names: authors list (link)
6. ↑ J. Bardeen, L.N. Cooper, and J.R. Schrieffer (1957). "Microscopic Theory of Superconductivity". Phys. Rev. 106 (1): 162–164. doi:10.1103/PhysRev.106.162.CS1 maint: Multiple names: authors list (link)
7. ↑ J. Bardeen, L.N. Cooper, and J.R. Schrieffer (1957). "Theory of Superconductivity". Phys. Rev. 108 (5): 1175–1205. doi:10.1103/PhysRev.108.1175.CS1 maint: Multiple names: authors list (link)

## References

[edit | edit source]

* Kleinert, Hagen, Gauge Fields in Condensed Matter, Vol. I, " SUPERFLOW AND VORTEX LINES"; Disorder Fields, Phase Transitions, pp. 1--742, World Scientific (Singapore, 1989); Paperback ISBN 9971-5-0210-0  (also readable online: Vol. I)
* Larkin, Anatoly; Varlamov, Andrei, Theory of Fluctuations in Superconductors, Oxford University Press, Oxford, United Kingdom, 2005 (ISBN 0198528159)
* A.G. Lebed (Ed.) (2008). The Physics of Organic Superconductors and Conductors (1nd ed.). Springer Series in Materials Science , Vol. 110. ISBN 978-3-540-76667-4 (Paperback) Check `|isbn=` value: invalid character (help).
* Matricon, Jean; Waysand, Georges; Glashausser, Charles; The Cold Wars: A History of Superconductivity, Rutgers University Press, 2003, ISBN 0813532957
* ScienceDaily: Physicist Discovers Exotic Superconductivity (University of Arizona) August 17, 2006
* Tinkham, Michael (2004). Introduction to Superconductivity (2nd ed.). Dover Books on Physics. ISBN 0-486-43503-2 (Paperback) Check `|isbn=` value: invalid character (help).
* Tipler, Paul; Llewellyn, Ralph (2002). Modern Physics (4th ed.). W. H. Freeman. ISBN 0-7167-4345-0.CS1 maint: Multiple names: authors list (link)

## External links

[edit | edit source]

* "Type 1 superconductors". Retrieved 2009-05-05.
* "Type 2 superconductors". Retrieved 2009-05-05.
* Superconductivity: Current in a Cape and Thermal Tights. An introduction to the topic for non-scientists National High Magnetic Field Laboratory
* Introduction to superconductivity
* Lectures on Superconductivity (series of videos, including interviews with leading experts)
* Superconducting Niobium Cavities
* Superconductivity in everyday life : Interactive exhibition
* Videos for various types of superconducting levitations including trains and hoolahoops - also videos of Ohm's law in a superconductor
* Video of the Meissner effect from the NJIT Mathclub
* Superconductivity News Update
* Superconductor Week Newsletter - industry news, links, et cetera
* Superconducting Magnetic Levitation Video
* Superconductor Science and Technology (journal)
* Why does a levitated magnet start to rotate? (German)
* National Superconducting Cyclotron Laboratory at Michigan State University
* High Temperature Superconducting and Cryogenics in RF applications
* CERN Superconductors Database
* High Temperature Superconductivity
* Magnetisation of High Temperature superconductors by the flux pumping method
* YouTube Video Levitating magnet
* Isotope effect in superconductivity
* International Workshop on superconductivity in Diamond and Related Materials (free download papers)
* New Diamond and Frontier Carbon Technology Volume 17, No.1 Special Issue on Superconductivity in CVD Diamond

Template:Link FA

((SIB}}

Template:WH

Template:WS