Water supply

"Waterworks" redirects here. For other uses, see Waterworks (disambiguation).

Water supply is the process of self-provision or provision by third parties of water of various qualities to different users. This article is so far limited to public water supply. It is expected to also cover industrial self-supply of water. Irrigation is covered separately.

Clean drinking water

## Contents

* 1 Global access to water supply
* 2 Water and public health
* 3 Technical overview of water supply
* 4 Service quality
* 4.1 Continuity of supply
* 4.2 Water quality
* 4.3 Water pressure
* 5 Comparing the performance of water and sanitation service providers
* 6 Institutional responsibility and governance
* 6.1 Policy and regulation
* 6.1.1 Regulatory agencies
* 6.2 Service provision
* 6.2.1 Geographical coverage
* 6.2.2 Sector coverage
* 6.2.3 Ownership and governance arrangements
* 6.2.3.1 Private sector participation
* 6.2.3.2 Governance arrangements
* 7 Tariffs
* 8 Metering
* 9 Costs and Financing
* 10 History of water supply
* 11 Footnotes
* 12 See also
* 13 External links

## Global access to water supply

[edit | edit source]

In 2004 about 3.5 billion people worldwide (54% of the global population) had access to piped water supply through house connections. Another 1.3 billion (20%) had access to safe water through other means than house connections, including standpipes, "water kiosks", protected springs and protected wells. Finally, more than 1 billion people (16%) did not have access to safe water, meaning that they have to revert to unprotected wells or springs, canals, lakes or rivers to fetch water.

## Water and public health

[edit | edit source]

File:BirminghamStopcock.jpgA cast-iron City of Birmingham stop-cock cover, from the time when the City Council was responsible for the supply of drinking water.

Both an adequate amount of water and adequate water quality are essential for public health and hygiene. Waterborne diseases are among the leading causes of morbidity and mortality in low- and middle-income countries, frequently called developing countries. For example, an estimated 900 million people suffer (and approximately 2 million die) from water-related diarrhoeal illnesses each year. At least 17 percent of the total burden of human diseases in many developing countries can be attributed to diarrhea and infestations by intestinal worms. The most common waterborne or waterwashed diseases are diarrhea, typhoid and cholera. Another example is trachoma, an infectious disease of the eye, which results in many cases of blindness in developing countries, which is associated with poor water supply, poor sanitation and failure to adequately process human excrement.

Sometimes, due to actual or suspected contamination by pathogens a boil water advisory, known as a Boiling water order in the UK, may be invoked.

The World Health Organization has defined around 20 liter per capita per day as basic access, which implies high health concerns, and 100 liter per capita per day as optimal access, associated with low health concerns. [6]

## Technical overview of water supply

[edit | edit source]

Further information: water supply network

Water supply systems get water from a variety of locations, including groundwater (aquifers), surface water (lakes and rivers), conservation and the sea through desalination. The water is then, in most cases, purified, disinfected through chlorination and sometimes fluoridated. Treated water then either flows by gravity or is pumped to reservoirs, which can be elevated such as water towers or on the ground (for indicators related to the efficiency of drinking water distribution see non-revenue water). Once water is used, wastewater is typically discharged in a sewer system and treated in a wastewater treatment plant before being discharged into a river, lake or the sea or reused for landscaping, irrigation or industrial use (see also sanitation).

## Service quality

[edit | edit source]

Many of the 3.5 billion people having access to piped water receive a poor or very poor quality of service, especially in developing countries where about 80% of the world population lives. Water supply service quality has many dimensions: continuity; water quality; pressure; and the degree of responsiveness of service providers to customer complaints.

### Continuity of supply

[edit | edit source]

Continuity of water supply is taken for granted in most developed countries, but is a severe problem in many developing countries, where sometimes water is only provided for a few hours every day or a few days a week. It is estimated that about half of the population of developing countries receives water on an intermittent basis.

### Water quality

[edit | edit source]

Drinking water quality has a micro-biological and a physico-chemical dimension. There are thousands of parameters of water quality. In public water supply systems water should, at a minimum, be disinfected - previously through chlorination, now using ultra violet light - or it may need to undergo treatment, especially in the case of surface water. For more details please see the separate entries on water quality, water treatment and drinking water.

### Water pressure

[edit | edit source]

Water pressures vary in different locations of a distribution system. Water mains below the street may operate at higher pressures, with a pressure reducer located at each point where the water enters a building or a house. In poorly managed systems, water pressure can be so low as to result only in a trickle of water or so high that it leads to damage to plumbing fixtures and waste of water. Pressure in an urban water system is typically maintained either by a pressurized water tank serving an urban area, by pumping the water up into a tower and relying on gravity to maintain a constant pressure in the system or solely by pumps at the water treatment plant and repeater pumping stations.

Typical UK pressures are 4-5 bar for an urban supply. However, some people can get over 8bars. A single iron main pipe may cross a deep valley, it will have the same nominal pressure, however each consumer will get a bit more or less because of the hydrostatic pressure (about 1 bar /10m height). So people at the bottom of a 100-foot hill will get about 3 bars more than those at the top.

The effective pressure also varies because of the supply resistance even for the same static pressure. An urban consumer may have 5 metres of 1/2" lead pipe running from the iron main, so the kitchen tap flow will be fairly unrestricted, so high flow. A rural consumer may have a kilometre of rusted and limed 3/4" iron pipe so their kitchen tap flow will be small.

For this reason the traditional UK domestic water system has a header/storage tank in the attic. Water can dribble into this tank through a 1/2" lead pipe, plus ball valve, and then supply the house on 22 or 28 mm pipes. Gravity water has a small pressure (say 1/4 bar in the bathroom) but needs wide pipes allow higher flows. This is fine for baths and toilets but is frequently inadequate for showers. People install shower booster pumps to increase the pressure. For this reason urban houses are increasingly using mains pressure boilers (combies) which take a long time to fill a bath but suit the high back pressure of a shower.

## Comparing the performance of water and sanitation service providers

[edit | edit source]

Comparing the performance of water and sanitation service providers (utilities) is needed, because the sector offers limited scope for direct competition (natural monopoly). Firms operating in competitive markets are under constant pressure to out perform each other. Water utilities are often sheltered from this pressure, and it frequently shows: some utilities are on a sustained improvement track, but many others keep falling further behind best practice. Benchmarking the performance of utilities allows to simulate competition, establish realistic targets for improvement and create pressure to catch up with better utilities. Information on benchmarks for water and sanitation utilities is provided by the International Benchmarking Network for Water and Sanitation Utilities.[1]

## Institutional responsibility and governance

[edit | edit source]

A great variety of institutions have responsibilities in water supply. A basic distinction is between institutions responsible for policy and regulation on the one hand; and institutions in charge of providing services on the other hand.

### Policy and regulation

[edit | edit source]

Water supply policies and regulation are usually defined by one or several Ministries, in consultation with the legislative branch. In the United States the EPA, whose administrator reports directly to the President, is responsible for water and sanitation policy and standard setting within the executive branch. In other countries responsibility for sector policy is entrusted to a Ministry of Environment (such as in Mexico and Colombia), to a Ministry of Health (such as in Panama, Honduras and Uruguay), a Ministry of Public Works (such as in Ecuador and Haiti), a Ministry of Economy (such as in German states) or a Ministry of Energy (such as in Iran). A few countries, such as Jordan and Bolivia, even have a Ministry of Water. Often several Ministries share responsibilities for water supply. In the European Union, important policy functions have been entrusted to the supranational level. Policy and regulatory functions include the setting of tariff rules and the approval of tariff increases; setting, monitoring and enforcing norms for quality of service and environmental protection; benchmarking the performance of service providers; and reforms in the structure of institutions responsible for service provision. The distinction between policy functions and regulatory functions is not always clear-cut. In some countries they are both entrusted to Ministries, but in others regulatory functions are entrusted to agencies that are separate from Ministries.

#### Regulatory agencies

[edit | edit source]

Dozens of countries around the world have established regulatory agencies for infrastructure services, including often water supply and sanitation, in order to better protect consumers and to improve efficiency. Regulatory agencies can be entrusted with a variety of responsibilities, including in particular the approval of tariff increases and the management of sector information systems, including benchmarking systems. Sometimes they also have a mandate to settle complaints by consumers that have not been dealt with satisfactorily by service providers. These specialized entities are expected to be more competent and objective in regulating service providers than departments of government Ministries. Regulatory agencies are supposed to be autonomous from the executive branch of government, but in many countries have often not been able to exercise a great degree of autonomy. In the United States regulatory agencies for utilities have existed for almost a century at the level of states, and in Canada at the level of provinces. In both countries they cover several infrastructure sectors. In many US states they are called Public Utility Commissions. For England and Wales, a regulatory agency for water (OFWAT) was created as part of the privatization of the water industry in 1989. In many developing countries, water regulatory agencies were created during the 1990s in parallel with efforts at increasing private sector participation. (for more details on regulatory agencies in Latin America, for example, please see Water and sanitation in Latin America and the regional association of water regulatory agencies ADERASA [http:/www.aderasa.org])

Many countries do not have regulatory agencies for water. In these countries service providers are regulated directly by local government, or the national government. This is, for example, the case in the countries of continental Europe, in China and India.

For more information on utility regulation in the water sector see the body of knowledge on utility regulation [7] and the World Bank's knowledge base on the same topic at [8]

### Service provision

[edit | edit source]

Water supply service providers, which are often utilities, differ from each other in terms of their geographical coverage relative to administrative boundaries; their sectoral coverage; their ownership structure; and their governance arrangements.

#### Geographical coverage

[edit | edit source]

Many water utilities provide services in a single city, town or municipality. However, in many countries municipalities have associated in regional or inter-municipal or multi-jurisdictional utilities to benefit from economies of scale. In the United States these can take the form of special-purpose districts which may have independent taxing authority. An example of a multi-jurisdictional water utility in the United States is WASA, a utility serving Washington, DC and various localities in the state of Maryland. Multi-jurisdictional utilities are also common in Germany, where they are known as "Zweckverbaende", in France and in Italy. In some federal countries there are water service providers covering most or all cities and towns in an entire state, such as in all states of Brazil and some states in Mexico (see Water supply and sanitation in Mexico). In England and Wales water supply and sewerage is supplied almost entirely through ten regional companies. Some smaller countries, especially developed countries, have established service providers that cover the entire country or at least most of its cities and major towns. Such national service providers are especially prevalent in West Africa and Central America, but also exist, for example, in Tunisia, Jordan and Uruguay (see also water supply and sanitation in Uruguay). In rural areas, where about half the world population lives, water services are often not provided by utilities, but by community-based organizations which usually cover one or sometimes several villages.

#### Sector coverage

[edit | edit source]

Some water utilities provide only water supply services, while sewerage is under the responsibility of a different entity. This is for example the case in Tunisia. However, in most cases water utilities also provide sewer and wastewater treatment services. In some cities or countries utilities also distribute electricity. In a few cases such multi-utilities also collect solid waste and provide local telephone services. An example of such an integrated utility can be found in the Colombian city of Medellín. Utilities that provide water, sanitation and electricity can be found in Frankfurt, Germany (Mainova), in Casablanca, Morocco and in Gabon in West Africa. Multi-utilities provide certain benefits such as common billing and the option to cross-subsidize water services with revenues from electricity sales, if permitted by law.

#### Ownership and governance arrangements

[edit | edit source]

Water supply providers can be either public, private, mixed or cooperative. Most urban water supply services around the world are provided by public entities.

##### Private sector participation

[edit | edit source]

An estimated 10 percent of urban water supply is provided by private or mixed public-private companies, usually under concessions, leases or management contracts. Under these arrangements the public entity that is legally responsible for service provision delegates certain or all aspects of service provision to the private service provider for a period typically ranging from 4 to 30 years. The public entity continues to own the assets. These arrangements are common in France and in Spain. Only in few parts of the world water supply systems have been completely sold to the private sector (privatization), such as in England and Wales as well as in Chile. The largest private water companies in the world are SUEZ and Veolia Environnement from France; Aguas de Barcelona from Spain; and Thames Water from the UK, all of which are engaged internationally (see links to website of these companies below).

##### Governance arrangements

[edit | edit source]

Governance arrangements for both public and private utilities can take many forms. Governance arrangements define the relationship between the service provider, its owners, its customers and regulatory entities. They determine the financial autonomy of the service provider and thus its ability to maintain its assets, expand services, attract and retain qualified staff, and ulitmately to provide high-quality services. Key aspects of governance arrangements are the extent to which the entity in charge of providing services is insulated from arbitrary political intervention; and whether there is an explicit mandate and political will to allow the service provider to recover all or at least most of its costs through tariffs and retain these revenues. If water supply is the responsibility of a department that is integrated in the administration of a city, town or municipality, there is a risk that tariff revenues are diverted for other purposes. In some cases, there is also a risk that staff are appointed mainly on political grounds rather than based on their professional credentials. These risks are particularly high in developing countries. Municipal or inter-municipal utilities with a separate legal personality and budget as well as a certain extent of managerial autonomy can mitigate these risks.

## Tariffs

[edit | edit source]

Almost all service providers in the world charge tariffs to recover part of their costs. According to estimates by the World Bank the average (mean) global water tariff is US$ 0.53 per cubic meter. In developed countries the average tariff is US$ 1.04, while it is only U$ 0.11 in the poorest developing countries. The lowest tariffs in developing countries are found in South Asia (mean of US$ 0.09/m3), while the highest are found in Latin America (US$ 0.41/m3).[2] Few utilities do recover all their costs. According to the same World Bank study only 30% of utilities globally, and only 50% of utilities in developed countries, generate sufficient revenue to cover operation, maintenance and partial capital costs.

According to another study undertaken in 2006 by NUS Consulting, the average water and sewerage tariff in 14 mainly OECD countries excluding VAT varied between US$ 0.66 per cubic meter in the United States and the equivalent of US$ 2.25 per cubic meter in Denmark.[3] However, it should be noted that water consumption in the US is much higher than in Europe. Therefore, residential water bills may be very similar, even if the tariff per unit of consumption tends to be higher in Europe than in the US.

A typical family on the US East Coast paid between US$30 and US$70 per month for water and sewer services in 2005.[4]

In developing countries tariffs are usually much further from covering costs. Residential water bills for a typical consumption of 15 cubic meters per month vary between less than US$ 1 and US$ 12 per month.[5]

Water and sanitation tariffs, which are almost always billed together, can take many different forms. Where meters are installed, tariffs are typically volumetric (per usage), sometimes combined with a small monthly fixed charge. In the absence of meters, flat or fixed rates - which are independent of actual consumption - are being charged. In developed countries, tariffs are usually the same for different categories of users and for different levels of consumption.

In developing countries, are often characterized by cross-subsidies with the intent to make water more affordable for residential low-volume users that are assumed to be poor. For example, industrial and commercial users are often charged higher tariffs than public or residential users. Also, metered users are often charged higher tariffs for higher levels of consumption (increasing-block tariffs). However, cross-subsidies between residential users do not always reach their objective. Given the overall low level of water tariffs in developing countries even at higher levels of consumption, most consumption subsidies benefit the wealthier segments of society.[6] Also, high industrial and commercial tariffs can provide an incentive for these users to supply water from other sources than the utility (own wells, water tankers) and thus actually erode the utility's revenue base.

## Metering

[edit | edit source]

File:Water meter.jpgA typical residential water meter

Metering of water supply is usually motivated by one or several of four objectives: First, it provides an incentive to conserve water which protects water resources (environmental objective). Second, it can postpone costly system expansion and saves energy and chemical costs (economic objective). Third, it allows a utility to better locate distribution losses (technical objective). Fourth, it allows to charge for water based on use, which is perceived by many as the fairest way to allocate the costs of water supply to users. Metering is considered good practice in water supply and is widespread in developed countries, except for the United Kingdom. In developing countries it is estimated that half of all urban water supply systems are metered and the tendency is increasing.

Water meters are read by one of several methods:

* the water customer writes down the meter reading and mails in a postcard with this info to the water department;
* the water customer writes down the meter reading and uses a phone dial-in system to transfer this info to the water department;
* the water customer logs in to the website of the water supply company, enters the address, meter ID and meter readings [9]
* a meter reader comes to the premise and enters the meter reading into a handheld computer;
* the meter reading is echoed on a display unit mounted to the outside of the premise, where a meter reader records them;
* a small radio is hooked up to the meter to automatically transmit readings to corresponding receivers in handheld computers, utility vehicles or distributed collectors
* a small computer is hooked up to the meter that can either dial out or receive automated phone calls that give the reading to a central computer system.

Most cities are increasingly installing Automatic Meter Reading (AMR) systems to prevent fraud, to lower ever-increasing labor and liability costs and to improve customer service and satisfaction.

## Costs and Financing

[edit | edit source]

The cost of supplying water consists to a very large extent of fixed costs (capital costs and personnel costs) and only to a small extent of variable costs that depend on the amount of water consumed (mainly energy and chemicals). The full cost of supplying water in urban areas in developed countries is about US$1-2 per cubic meter depending on local costs and local water consumption levels. The cost of sanitation (sewerage and wastewater treatment) is another US$1-2 per cubic meter. These costs are somewhat lower in developing countries. Throughout the world, only part of these costs is usually billed to consumers, the remainder being financed through direct or indirect subsidies from local, regional or national governments (see section on tariffs).

Besides subsidies water supply investments are financed through internally generated revenues as well as through debt. Debt financing can take the form of credits from commercial Banks, credits from international financial institutions such as the World Bank and regional development banks (in the case of developing countries), and bonds (in the case of some developed countries and some upper middle-income countries).

## History of water supply

[edit | edit source]

Throughout history people have devised systems to make getting and using water more convenient. Early Rome had indoor plumbing, meaning a system of aqueducts and pipes that terminated in homes and at public wells and fountains for people to use.

The technique of purification of drinking water by use of compressed liquefied chlorine gas was developed in 1910 by U.S. Army Major (later Brig. Gen.) Carl Rogers Darnall (1867-1941), Professor of Chemistry at the Army Medical School. Shortly thereafter, Major (later Col.) William J. L. Lyster (1869-1947) of the Army Medical Department used a solution of calcium hypochlorite in a linen bag to treat water. For many decades, Lyster's method remained the standard for U.S. ground forces in the field and in camps, implemented in the form of the familiar Lyster Bag (also spelled Lister Bag). Darnall's work became the basis for present day systems of municipal water purification.

Template:Sect-stub

## Footnotes

[edit | edit source]

1. ↑ IBNET [1]
2. ↑ World Bank 2006: Water, Electricity and the Poor. Who Benefits from Utility Subsidies?, p. 21 [2] Data for 132 cities were assessed. The tariff is estimate for a consumption level of 15 cubic meters per month
3. ↑ NUS Consulting 2005-2006 International Water Report & Cost Survey [3] The study covered Denmark, Germany, the UK, Belgium, France, The Netherlands, Italy, Finland, Australia, Spain, South Africa, Sweden, Canada and the US. The methodology for assessing tariffs may be different from the methodology of the World Bank study cited above. It should be noted that the report means by "costs" average tariffs and not the costs of the utility, which can be lower or higher than average tariffs
4. ↑ quoted from a comparison of 24 utilities on the US East Coast in the 2005 Annual Report of DC WASA, p. 38 [4] The comparison refers to a consumption level of 25 cubic feet per quarter
5. ↑ World Bank, op.cit., calculated from Table 2.3 on p. 21
6. ↑ World Bank 2006: Water, Electricity and the Poor. Who Benefits from Utility Subsidies? [5]

## See also

[edit | edit source]

* Carl Rogers Darnall
* Drinking water
* Tap water
* Safe water
* Sanitation
* Domestic water system
* Non-revenue water
* Water crisis
* Water supply and sanitation in Colombia
* Water supply and sanitation in Ecuador
* Water supply and sanitation in El Salvador
* Water supply and sanitation in France
* Public water supply and sanitation in Germany
* Water and sanitation in Latin America
* Water supply and sanitation in Mexico
* Water supply and sanitation in the United States
* Water supply and sanitation in the United Kingdom
* Water supply and sanitation in Uruguay

## External links

[edit | edit source]

Global water supply issues

* Appropedia:Water supply \- a wiki focusing on sustainability and developing world issues.
* Safe Drinking Water Is Essential \- An online exhibit of the Marian Koshland Science Museum of the National Academy of Sciences that examines the state of the world's water supply and what can be done to improve it.

Professional associations

* The International Water Association (IWA), an association of water professionals [10]
* The American Waterworks Association (AWWA) [11]

Organizations and programs affiliated with the UN

* The UN Secretary-General’s Advisory Board on Water and Sanitation
* [12]
* The Joint Monitoring Program (JMP) for water and sanitation of UNICEF and the WHO [13]
* The World Health Organization (WHO) [14]

International financial institutions supporting water supply and sanitation

* The World Bank, the largest international financial institution providing finance and knowledge for water supply and sanitation in developing countries [15]
* The African Development Bank [16]
* The Asian Development Bank [17]
* The Inter-American Development Bank [18]

Other international bodies, programs, organizations and units

* The Water and Sanitation Program, an international partnership affiliated with the World Bank to help the poor gain sustained access to improved water supply and sanitation services [19]
* The International Benchmarking Network for Water and Sanitation Utilities (IBNET) [20]
* The World Water Council, an international body that organizes the World Water Fora [21]
* The water and sanitation site of the Organisation for Economic Cooperation and Development (OECD) [22]
* The Utility Regulation site of the IFC's and World Bank's Knowledge Services for the Financial and Private Sector Development, with a focus on water supply [23]
* Water Aid, an international NGO dedicated exclusively to the provision of safe domestic water, sanitation and hygiene education [24]
* The Public Services International Research Unit (PSIRU), the research unit of the global confederation of public service trade unions Public Services International. PSIRU has done extensive research on private sector participation in water supply and sanitation [25]
* The Solar Water Disinfection Process, a simple low cost method for purifying water, developed by the Swiss Federal Institute for Environmental Science and Technology. [26]

International private water companies

* Veolia Water, an international water company based in France (ex-Compagnie Generale des Eaux) [27]
* Suez Environnement, an international water company based in France (ex-Compagnie Lyonnaise des Eaux) [28]
* Aguas de Barcelona, an international water company based in Spain [29]
* Thames Water, an international water company based in the UK [30]

de:Trinkwasser hr:Vodovod sl:vodovod