Ammunition boot

Footwear for the British Army

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)

This article's factual accuracy is disputed. Relevant discussion may be found on the talk page. Please help to ensure that disputed statements are reliably sourced. (June 2015) (Learn how and when to remove this message)

|

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Ammunition boot" – news · newspapers · books · scholar · JSTOR (June 2015) (Learn how and when to remove this message)

|

This article possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (June 2015) (Learn how and when to remove this message)

|

(Learn how and when to remove this message)

Soldier of the British Army's Army Air Corps wearing Boots, Ankle, General Service ("ammo boots") as part of ceremonial No 2 Dress in 2011

Ammunition boots are a form of military footwear. They were the standard combat boot for the British Army and other forces around the British Empire and Commonwealth from at least the mid-1860s[a] until their replacement a century later in the 1960s with the rubber-soled Boots DMS (for 'Direct Moulded Sole').[2]

They replaced the earlier ankle boots that had been in service since the early 1800s. Ammunition boots (now known as Boots, Ankle, General Service) remain in use today by British and Commonwealth armies for ceremonial public duties, most notably by the British Army's Household Division, who provide the King's Guard.

The term "Ammunition boots" is a generic term for these heavy, studded ankle boots, which were produced in a variety of patterns. The name supposedly comes from the boots' being historically procured by the Master Gunner and the Munitions Board at Woolwich (the Regiment of Artillery's headquarters) rather than Horse Guards (the headquarters of the British Army), and being of 'ammunition quality'.

## History

[edit]

A Royal Marine being issued ammunition boots during the Second World War

Ammunition boots were unlined ankle-boots, usually with leather laces, iron heel-plate and toe-plate, and an iron-studded leather sole. The vamp (front) and quarters (sides) were often made of a contrasting type of leather than the toe case (toe cap) and counter (heel cap), one made of "pebble-grained" (dimpled) leather and the other of smooth leather. They were designed to be hard-wearing and long-lasting rather than comfortable. The hobnail-studded soles made a loud crunching sound when the wearer was marching, earning them the nickname "crunchies".

Prior to the First World War, British soldiers were issued two pairs of boots, both made with a brown finish that had to be polished black. There was a brief period (1908 to 1914) where they were issued one pair that was hand-polished in black for parade and drill, and one pair finished in raw brown hide for fatigue duty and field service. World War I forced the reversion to brown leather boots for Other Ranks, and a simplification of the patterns, but polished black boots were still worn by some individuals or units out of habit. Officers, who purchased their own uniforms, were still required to wear polished brown boots and matching leather Sam Browne belt with their field service uniform, marking them apart from their men. Officers' boots had heel plates, but lacked the sole studs and toe plates because they could afford to have the soles replaced. The later Boots, General Service adopted in 1927 were issued from the factory in black leather.

## Patterns

[edit]

The original Pattern 1037 was made from 1887 to 1907. During the Second Boer War (1899–1902), civilian manufacturers made a series of variants on the Pattern 1037 due to differing manufacturing techniques (like machine-sewn uppers or glued-on outer soles).

Royal Bermuda Regiment soldiers in No.3 dress and ammunition boots.

An improved 1037i pattern was adopted from 1907 to 1911. It was temporarily replaced by the similar 7325 and 7326 patterns from 1911 to 1914 while they did research for a replacement boot. The experimental "A" and "HN" series were also made during this time but were obsolete by the dawn of World War I.

By 1915, the "B" series was begun, consisting chiefly of the "B2" and "B5". It was a pattern of ammunition boot with woven cotton laces, a plain-leather counter, and lacked the leather toe cap. It was created to save leather and increase production. To reinforce the boot and increase wear the B2 series had a horizontal seam between the parts of the upper and the "B5" series had rivets between the vamp and quarters.

In 1918, the post-war 9902 pattern came into service. It had a "clump sole" (one-piece sole and heel), smooth leather vamp and quarters, and pebbled-leather counter and toe-cap. It came in brown leather, but was polished black.

In 1924, the Pattern 4055 boot, forerunner of the Boot, General Service (BGS) was issued. It came in brown leather and had 25 hobnails. In 1927, the later Pattern 10085 boot, the BGS, was similar except it came in black leather.

### Variant patterns

[edit]

Ammunition boots worn by World War II reenactors

Vehicle drivers wore boots without hobnails because they would damage the pedals and create sparks. This was extended to armoured vehicle crews in the Royal Tank Regiment and Reconnaissance Corps in 1942, as well as to the crews of waterborne craft of the Royal Army Service Corps in 1943.[3]

Specialists and ammunition storemen were issued regular ammunition boots with rubber heels and rubber crepe soles that lacked the hobnails and steel heel- and toe-plates. This was to avoid creating sparks near flammable or explosive stores (like gunpowder or gasoline). Commandos were issued them to make it easier for them to move silently.

During World War II, a pattern without the toecap was used by the Canadian Army and was issued to the Royal Air Force and the Royal Marines. As an economy measure the number of hobnails were reduced in April, 1942 to 15 hobnails, later reduced to 13 hobnails in September, 1942.

Ammunitions boots are often bulled using shoe polish and beeswax

The boots were the focus of much drill and attention. Achieving a high polish was often the aim and required hours of "bulling" (vigorous polishing) until it achieved a mirror like shine. Experienced soldiers would "burn-down" the dimpled surface of the boots with beeswax and a heated spoon to make them smooth and easier to shine.

## See also

[edit]

* List of shoe styles

## Notes

[edit]

1. ^ The term “Ammunition Boot” has been used since at least 1864.[1]

## References

[edit]

1. ^ R.U.S.I. Journal (vol. 8). Royal United Services Institute for Defence Studies. 1864. p. 388.
2. ^ "Boots, ankle length DMS". Imperial War Museums. Retrieved 2022-11-24.
3. ^ "Boots, ankle length ('ammunition boots'), O/Rs".

* Army Boots - British

* v
* t
* e

Footwear

* List of shoe styles
* List of boots
* Shoe
* Shoemaking
* Shoe size

Dress shoes|

* Blucher
* Brogues
* Brothel creepers
* Derby
* Monks
* Oxfords
* Spectator shoes (Co-respondent shoes)
* Winklepickers
* Wholecuts

| Slip-on shoes|

* Court shoes
* Prince Albert slippers
* Loafers
* Venetian-style shoes

|

Women's|

* Ballet flats
* High-heeled footwear
* Mary Janes
* Mojari
* Mules
* Peep-toe shoes
* Saddle shoes
* Slingbacks
* T-bar sandals

Other shoes|

* Driving moccasins
* Flip-flops
* Galoshes
* Platform shoes
* Sandals
* Self-tying shoes
* Slides
* Slippers (Uwabaki)
* Tiger-head shoes
* Veldskoens
* Zōri

Wooden footwear|

* Bakya
* British clogs
* Cantabrian albarcas
* Clogs
* Geta
* Klompen
* Namaksin
* Okobo
* Padukas
* Pattens
* Sabot
* Träskor

Boots|

| Military|

* Ammunition
* Bunny
* Combat
* Jack
* Jump
* Jungle
* Patauga
* Tanker
* Trench

|

Work|

* Australian work
* Cowboy
* Engineer
* Hip
* Jika-tabi
* Rigger
* Steel-toe
* Waders

Fashion boots|

* Chelsea (Beatle)
* Chukka
* Go-go
* Knee-high
* Over-the-knee
* Platform
* Thigh-high
* Ugg

Other|

* Jodhpur
* Wellington
* Ballet
* Bean

Sport-related footwear|

* Ballet shoes
* Boat shoes
* Climbing shoes
* Cross country running shoes
* Cycling shoes
* Football boots
* Ghillies
* Hiking boots
* Ice skates
* Inline skates
* Kung fu shoes
* Minimalist shoes
* Motorcycle boots
* Mountaineering boots
* Plimsolls
* Pointe shoes
* Racing flats
* Racing shoes
* Riding boots
* Roller shoes
* Roller skates
* Sabatons
* Safari boots
* Skate shoes
* Ski boots
* Sneakers
* Swimfins
* Water shoes
* Wrestling shoes

Folk footwear|

* Abacas
* Abarkas
* Alpargatas
* Avarcas
* Balghas
* Bast shoes
* Ciocie
* Clogs
* Espadrilles
* Furlane
* Galesh
* Geta
* Giveh
* Haferlschuh
* Hnyat-phanats
* Huarache
* Hwa
* Jipsin
* Jorabs
* Kamiks
* Kolhapuri chappals
* Moccasins
* Mojaris
* Mukluks
* Nalins
* Okobo
* Opanci
* Peshawari chappals
* Snowshoes
* Tsarouchi
* Takunya
* Upanah
* Valenkis
* Waraji
* Zōri

Historical footwear|

* Areni-1 shoes
* Buskins
* Calcei
* Caligae
* Carbatina
* Cavalier boots
* Chinese styles
* Chopines
* Duckbill shoes
* Flowerpot shoes
* Hessians
* Lotus shoes
* Pampooties
* Pigaches
* Poulaines
* Socci
* Turnshoes

Shoe construction|

* Bespoke shoes
* Blake construction
* Goodyear welt
* Shoe buckle
* Shoelaces
* Toe box

| High heels|

* Clear heels
* Kitten heels
* Spool heels
* Stiletto heels
* Wedges

|

Hosiery|

* Anklets
* Bobby socks
* Dress socks
* Footwraps
* Knee highs
* Pantyhose
* Sock
* Stocking
* Tights
* Toe socks
* Tabi

Related|

* Abandoned footwear
* Spats

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template