Asphalt concrete

Composite material used for paving

"Blacktop" redirects here. For other uses, see Blacktop (disambiguation).

Asphalt batch mix plant A machine laying asphalt concrete, fed from a dump truck

Asphalt concrete (commonly called asphalt,[1] blacktop, or pavement in North America, and tarmac or bitumen macadam in the United Kingdom and the Republic of Ireland) is a composite material commonly used to surface roads, parking lots, airports, and the core of embankment dams.[2] Asphalt mixtures have been used in pavement construction since the beginning of the twentieth century.[3] It consists of mineral aggregate bound together with bitumen (also known as asphalt), laid in layers, and compacted.

The process was refined and enhanced by Belgian-American inventor Edward De Smedt.[4]

The terms asphalt (or asphaltic) concrete, bituminous asphalt concrete, and bituminous mixture are typically used only in engineering and construction documents, which define concrete as any composite material composed of mineral aggregate adhered with a binder. The abbreviation, AC, is sometimes used for asphalt concrete but can also denote asphalt content or asphalt cement, referring to the liquid asphalt portion of the composite material.

## Mixture formulations[edit]

As shown in this cross-section, many older roadways are smoothed by applying a thin layer of asphalt concrete to the existing portland cement concrete, creating a composite pavement.

Mixing of asphalt and aggregate is accomplished in one of several ways:[5]

Hot-mix asphalt concrete (commonly abbreviated as HMA)
This is produced by heating the asphalt binder to decrease its viscosity and drying the aggregate to remove moisture from it prior to mixing. Mixing is generally performed with the aggregate at about 150 °C (300 °F) for virgin asphalt and 170 °C (330 °F) for polymer modified asphalt, and the asphalt cement at 93 °C (200 °F). Paving and compaction must be performed while the asphalt is sufficiently hot. In many locales paving is restricted to summer months because in winter the base will cool the asphalt too quickly before it can be packed to the required density. HMA is the form of asphalt concrete most commonly used on high traffic pavements such as those on major highways, racetracks and airfields. It is also used as an environmental liner for landfills, reservoirs, and fish hatchery ponds.[6]
Asphaltic concrete laying machine in operation in Laredo, Texas

Warm-mix asphalt concrete (commonly abbreviated as WMA)
This is produced by adding either zeolites, waxes, asphalt emulsions or sometimes water to the asphalt binder prior to mixing. This allows significantly lower mixing and laying temperatures and results in lower consumption of fossil fuels, thus releasing less carbon dioxide, aerosols and vapors. This improves working conditions, and lowers laying-temperature, which leads to more rapid availability of the surface for use, which is important for construction sites with critical time schedules. The usage of these additives in hot-mixed asphalt (above) may afford easier compaction and allow cold-weather paving or longer hauls. Use of warm mix is rapidly expanding. A survey of US asphalt producers found that nearly 25% of asphalt produced in 2012 was warm mix, a 416% increase since 2009.[7] Cleaner road pavements can be potentially developed by combining WMA and material recycling. Warm Mix Asphalt (WMA) technology has environmental, production, and economic benefits.[8]
Cold-mix asphalt concrete
This is produced by emulsifying the asphalt in water with an emulsifying agent before mixing with the aggregate. While in its emulsified state, the asphalt is less viscous and the mixture is easy to work and compact. The emulsion will break after enough water evaporates and the cold mix will, ideally, take on the properties of an HMA pavement. Cold mix is commonly used as a patching material and on lesser-trafficked service roads.
Cut-back asphalt concrete
Is a form of cold mix asphalt produced by dissolving the binder in kerosene or another lighter fraction of petroleum before mixing with the aggregate. While in its dissolved state, the asphalt is less viscous and the mix is easy to work and compact. After the mix is laid down the lighter fraction evaporates. Because of concerns with pollution from the volatile organic compounds in the lighter fraction, cut-back asphalt has been largely replaced by asphalt emulsion.[9]
Mastic asphalt concrete, or sheet asphalt
This is produced by heating hard grade blown bitumen (i.e., partly oxidised) in a green cooker (mixer) until it has become a viscous liquid after which the aggregate mix is then added.

The bitumen aggregate mixture is cooked (matured) for around 6–8 hours and once it is ready, the mastic asphalt mixer is transported to the work site where experienced layers empty the mixer and either machine or hand lay the mastic asphalt contents on to the road. Mastic asphalt concrete is generally laid to a thickness of around 20–30 millimetres (13⁄16–1+3⁄16 in) for footpath and road applications and around 10 millimetres (3⁄8 in) for flooring or roof applications.
High-modulus asphalt concrete, sometimes referred to by the French-language acronym EMÉ (enrobé à module élevé)
This uses a very hard bituminous formulation (penetration 10/20), sometimes modified, in proportions close to 6% by weight of the aggregates, as well as a high proportion of mineral powder (between 8–10%) to create an asphalt concrete layer with a high modulus of elasticity (of the order of 13000 MPa). This makes it possible to reduce the thickness of the base layer up to 25% (depending on the temperature) in relation to conventional bitumen,[10] while offering as very high fatigue strengths.[11] High-modulus asphalt layers are used both in reinforcement operations and in the construction of new reinforcements for medium and heavy traffic. In base layers, they tend to exhibit a greater capacity of absorbing tensions and, in general, better fatigue resistance.[12]

In addition to the asphalt and aggregate, additives, such as polymers, and antistripping agents may be added to improve the properties of the final product.

Areas paved with asphalt concrete—especially airport aprons—have been called "the tarmac" at times, despite not being constructed using the tarmacadam process.[13]

A variety of specialty asphalt concrete mixtures have been developed to meet specific needs, such as stone-matrix asphalt, which is designed to ensure a strong wearing surface, or porous asphalt pavements, which are permeable and allow water to drain through the pavement for controlling storm water.

## Roadway performance characteristics[edit]

An airport taxiway, one of the uses of asphalt concrete

Different types of asphalt concrete have different performance characteristics in roads in terms of surface durability, tire wear, braking efficiency and roadway noise. In principle, the determination of appropriate asphalt performance characteristics must take into account the volume of traffic in each vehicle category, and the performance requirements of the friction course. In general, the viscosity of asphalt allows it to be applied directly to form a convex surface, which increases the drainage of streets and roads. This is an advantage over concrete. Concrete can be screeded to form many types of shapes and curves, yet it is impractical to use that method on an area as long as a street or road. As a disadvantage of asphalt, however, concrete is more durable, and the preference for surface is weighed against this depending on the situation.

Asphalt concrete generates less roadway noise than a Portland cement concrete surface, and is typically less noisy than chip seal surfaces.[14][15] Because tire noise is generated through the conversion of kinetic energy to sound waves, more noise is produced as the speed of a vehicle increases. The notion that highway design might take into account acoustical engineering considerations, including the selection of the type of surface paving, arose in the early 1970s.[14][15]

With regard to structural performance, the asphalt behaviour depends on a variety of factors including the material, loading and environmental condition. Furthermore, the performance of pavement varies over time. Therefore, the long-term behaviour of asphalt pavement is different from its short-term performance. The LTPP is a research program by the FHWA, which is specifically focusing on long-term pavement behaviour.[16][17]

## Degradation and restoration[edit]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (February 2017) (Learn how and when to remove this template message)

|

Asphalt damaged by frost heaves

Asphalt deterioration can include crocodile cracking, potholes, upheaval, raveling, bleeding, rutting, shoving, stripping, and grade depressions. In cold climates, frost heaves can crack asphalt even in one winter. Filling the cracks with bitumen is a temporary fix, but only proper compaction and drainage can slow this process.

Factors that cause asphalt concrete to deteriorate over time mostly fall into one of three categories: construction quality, environmental considerations, and traffic loads. Often, damage results from combinations of factors in all three categories.

Construction quality is critical to pavement performance. This includes the construction of utility trenches and appurtenances that are placed in the pavement after construction. Lack of compaction in the surface of the asphalt, especially on the longitudinal joint, can reduce the life of a pavement by 30 to 40%. Service trenches in pavements after construction have been said to reduce the life of the pavement by 50%,[18] mainly due to the lack of compaction in the trench, and also because of water intrusion through improperly sealed joints.

Environmental factors include heat and cold, the presence of water in the subbase or subgrade soil underlying the pavement, and frost heaves.

High temperatures soften the asphalt binder, allowing heavy tire loads to deform the pavement into ruts. Paradoxically, high heat and strong sunlight also cause the asphalt to oxidize, becoming stiffer and less resilient, leading to crack formation. Cold temperatures can cause cracks as the asphalt contracts. Cold asphalt is also less resilient and more vulnerable to cracking.

Water trapped under the pavement softens the subbase and subgrade, making the road more vulnerable to traffic loads. Water under the road freezes and expands in cold weather, causing and enlarging cracks. In spring thaw, the ground thaws from the top down, so water is trapped between the pavement above and the still-frozen soil underneath. This layer of saturated soil provides little support for the road above, leading to the formation of potholes. This is more of a problem for silty or clay soils than sandy or gravelly soils. Some jurisdictions pass frost laws to reduce the allowable weight of trucks during the spring thaw season and protect their roads.

The damage a vehicle causes is roughly proportional to the axle load raised to the fourth power, so doubling the weight an axle carries actually causes 16 times as much damage.[19] Wheels cause the road to flex slightly, resulting in fatigue cracking, which often leads to crocodile cracking. Vehicle speed also plays a role. Slowly moving vehicles stress the road over a longer period of time, increasing ruts, cracking, and corrugations in the asphalt pavement.

Other causes of damage include heat damage from vehicle fires, or solvent action from chemical spills.

### Prevention and repair of degradation[edit]

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Asphalt concrete" – news · newspapers · books · scholar · JSTOR (April 2021) (Learn how and when to remove this template message)

|

Machine sealcoating asphalt pavement

The life of a road can be prolonged through good design, construction and maintenance practices. During design, engineers measure the traffic on a road, paying special attention to the number and types of trucks. They also evaluate the subsoil to see how much load it can withstand. The pavement and subbase thicknesses are designed to withstand the wheel loads. Sometimes, geogrids are used to reinforce the subbase and further strengthen the roads. Drainage, including ditches, storm drains and underdrains are used to remove water from the roadbed, preventing it from weakening the subbase and subsoil.[20]

Sealcoating asphalt is a maintenance measure that helps keep water and petroleum products out of the pavement.

Maintaining and cleaning ditches and storm drains will extend the life of the road at low cost. Sealing small cracks with bituminous crack sealer prevents water from enlarging cracks through frost weathering, or percolating down to the subbase and softening it.

For somewhat more distressed roads, a chip seal or similar surface treatment may be applied. As the number, width and length of cracks increases, more intensive repairs are needed. In order of generally increasing expense, these include thin asphalt overlays, multicourse overlays, grinding off the top course and overlaying, in-place recycling, or full-depth reconstruction of the roadway.

It is far less expensive to keep a road in good condition than it is to repair it once it has deteriorated. This is why some agencies place the priority on preventive maintenance of roads in good condition, rather than reconstructing roads in poor condition. Poor roads are upgraded as resources and budget allow. In terms of lifetime cost and long term pavement conditions, this will result in better system performance. Agencies that concentrate on restoring their bad roads often find that by the time they have repaired them all, the roads that were in good condition have deteriorated.[21]

Some agencies use a pavement management system to help prioritize maintenance and repairs.

## Recycling[edit]

Chunks of Reclaimed Asphalt Pavement (RAP) are deposited for recycling.

Asphalt concrete is a recyclable material that can be reclaimed and reused both on-site and in asphalt plants.[22] The most common recycled component in asphalt concrete is reclaimed asphalt pavement (RAP). RAP is recycled at a greater rate than any other material in the United States.[23] Many roofing shingles also contain asphalt, and asphalt concrete mixes may contain reclaimed asphalt shingles (RAS). Research has demonstrated that RAP and RAS can replace the need for up to 100% of the virgin aggregate and asphalt binder in a mix,[24] but this percentage is typically lower due to regulatory requirements and performance concerns. In 2019, new asphalt pavement mixtures produced in the United States contained, on average, 21.1% RAP and 0.2% RAS.[23]

### Recycling methods[edit]

Recycled asphalt components may be reclaimed and transported to an asphalt plant for processing and use in new pavements, or the entire recycling process may be conducted in-place.[22] While in-place recycling typically occurs on roadways and is specific to RAP, recycling in asphalt plants may utilize RAP, RAS, or both. In 2019, an estimated 97.0 million tons of RAP and 1.1 million tons of RAS were accepted by asphalt plants in the United States.[23]

RAP is typically received by plants after being milled on-site, but pavements may also be ripped out in larger sections and crushed in the plant. RAP millings are typically stockpiled at plants before being incorporated into new asphalt mixes. Prior to mixing, stockpiled millings may be dried and any that have agglomerated in storage may have to be crushed.[22]

RAS may be received by asphalt plants as post-manufacturer waste directly from shingle factories, or they may be received as post-consumer waste at the end of their service life.[23] Processing of RAS includes grinding the shingles and sieving the grinds to remove oversized particles. The grinds may also be screened with a magnetic sieve to remove nails and other metal debris. The ground RAS is then dried, and the asphalt cement binder can be extracted.[25] For further information on RAS processing, performance, and associated health and safety concerns, see Asphalt Shingles.

In-place recycling methods allow roadways to be rehabilitated by reclaiming the existing pavement, remixing, and repaving on-site. In-place recycling techniques include rubblizing, hot in-place recycling, cold in-place recycling, and full-depth reclamation.[22][26] For further information on in-place methods, see Road Surface.

### Performance[edit]

During its service life, the asphalt cement binder, which makes up about 5–6% of a typical asphalt concrete mix,[27] naturally hardens and becomes stiffer.[28][29][22] This aging process primarily occurs due to oxidation, evaporation, exudation, and physical hardening.[22] For this reason, asphalt mixes containing RAP and RAS are prone to exhibiting lower workability and increased susceptibility to fatigue cracking.[24][25] These issues are avoidable if the recycled components are apportioned correctly in the mix.[28][24] Practicing proper storage and handling, such as by keeping RAP stockpiles out of damp areas or direct sunlight, is also important in avoiding quality issues.[24][22] The binder aging process may also produce some beneficial attributes, such as by contributing to higher levels of rutting resistance in asphalts containing RAP and RAS.[29][30]

One approach to balancing the performance aspects of RAP and RAS is to combine the recycled components with virgin aggregate and virgin asphalt binder. This approach can be effective when the recycled content in the mix is relatively low,[28] and has a tendency to work more effectively with soft virgin binders.[29] A 2020 study found that the addition of 5% RAS to a mix with a soft, low-grade virgin binder significantly increased the mix's rutting resistance while maintaining adequate fatigue cracking resistance.[30]

In mixes with higher recycled content, the addition of virgin binder becomes less effective, and rejuvenators may be used.[28] Rejuvenators are additives that restore the physical and chemical properties of the aged binder.[29] When conventional mixing methods are used in asphalt plants, the upper limit for RAP content before rejuvenators become necessary has been estimated at 50%.[24] Research has demonstrated that the use of rejuvenators at optimal doses can allow for mixes with 100% recycled components to meet the performance requirements of conventional asphalt concrete.[24][28]

### Other recycled materials in asphalt concrete[edit]

Beyond RAP and RAS, a range of waste materials can be re-used in place of virgin aggregate, or as rejuvenators. Crumb rubber, generated from recycled tires, has been demonstrated to improve the fatigue resistance and flexural strength of asphalt mixes that contain RAP.[31][32] In California, legislative mandates require the Department of Transportation to incorporate crumb rubber into asphalt paving materials.[33] Other recycled materials that are actively included in asphalt concrete mixes across the United States include steel slag, blast furnace slag, and cellulose fibers.[23]

Further research has been conducted to discover new forms of waste that may be recycled into asphalt mixes. A 2020 study conducted in Melbourne, Australia presented a range of strategies for incorporating waste materials into asphalt concrete. The strategies presented in the study include the use of plastics, particularly high-density polyethylene, in asphalt binders, and the use of glass, brick, ceramic, and marble quarry waste in place of traditional aggregate.[34]

Rejuvenators may also be produced from recycled materials, including waste engine oil, waste vegetable oil, and waste vegetable grease.[28]

Recently, discarded face masks have been incorporated into stone mastic.[35]

## See also[edit]

* Free floating screed – Part of a paving machine that spreads and smooths paving material
* Pavement engineering
* Marshall Stability Method
* Paver – Construction equipment used to lay asphalt
* Plastic armour – British World War II stone aggregate ship armour
* Road surface – Road covered with durable surface material
* Sealcoat
* Stamped asphalt – imitation stone product made from asphaltPages displaying wikidata descriptions as a fallback

## References[edit]

1. ^ The American Heritage Dictionary of the English Language. Boston: Houghton Mifflin Harcourt. 2011. p. 106\. ISBN 978-0-547-04101-8.
2. ^ "Asphalt concrete cores for embankment dams". International Water Power and Dam Construction. Archived from the original on 7 July 2012. Retrieved 3 April 2011.
3. ^ Polaczyk, Pawel; Huang, Baoshan; Shu, Xiang; Gong, Hongren (September 2019). "Investigation into Locking Point of Asphalt Mixtures Utilizing Superpave and Marshall Compactors". Journal of Materials in Civil Engineering. 31 (9): 04019188. doi:10.1061/(ASCE)MT.1943-5533.0002839. S2CID 197635732.
4. ^ Reid, Carlton (2015). Roads Were Not Built for Cars: How Cyclists Were the First to Push for Good Roads & Became the Pioneers of Motoring. Island Press. p. 120\. ISBN 978-1-61091-689-9.
5. ^ "Asphalt Pavement Technologies". Asphalt Pavement Alliance. Retrieved 2014-09-13.
6. ^ "Asphalt for Environmental Liners (PS 17)" (PDF). National Asphalt Pavement Association. 1984-11-15. Retrieved 2014-09-13.
7. ^ "Survey finds growth in recycled materials for asphalt". Construction Demolition Recycling. February 5, 2014. Archived from the original on 2014-02-23.
8. ^ Cheraghian, Goshtasp; Cannone Falchetto, Augusto; You, Zhanping; Chen, Siyu; Kim, Yun Su; Westerhoff, Jan; Moon, Ki Hoon; Wistuba, Michael P. (September 2020). "Warm mix asphalt technology: An up to date review". Journal of Cleaner Production. 268: 122128. doi:10.1016/j.jclepro.2020.122128. S2CID 219437990.
9. ^ Asphalt Paving Principles (PDF). Cornell Local Roads Program. 2003.
10. ^ Espersson, Maria (November 2014). "Effect in the high modulus asphalt concrete with the temperature". Construction and Building Materials. 71: 638–643. doi:10.1016/j.conbuildmat.2014.08.088.
11. ^ Jones, Jason; Bryant, Peter (March 2015). High Modulus Asphalt (EME2) Pavement Design (Technical Note 142) (PDF). Fortitude Valley, Queensland, Australia: State of Queensland (Australia) Department of Transport and Main Roads. Archived from the original (PDF) on 2016-12-21. Retrieved 2016-12-20.
12. ^ Balkema, AA; Choi, YK; Collop, AC; Airey, GD (March 2002). Assessment of Durability of High Modulus Base (HMB) Materials. 6th International Conference on the Bearing Capacity of Roads and Airfields. ISBN 90-5809-398-0.
13. ^ Valdes, Fred (2009-08-21). Tarmac. Xlibris Corporation. ISBN 978-1-4653-2242-5.
14. ^ a b John Shadely, Acoustical analysis of the New Jersey Turnpike widening project between Raritan and East Brunswick, Bolt Beranek and Newman, 1973
15. ^ a b Hogan, C. Michael (September 1973). "Analysis of highway noise". Water, Air, and Soil Pollution. 2 (3): 387–392. Bibcode:1973WASP....2..387H. doi:10.1007/BF00159677. S2CID 109914430.
16. ^ "Federal Highway Administration Research and Technology Coordinating, Developing, and Delivering Highway Transportation Innovations". fhwa.dot.gov.
17. ^ "TRB: Long-Term Pavement Performance Studies".
18. ^ "Can Permeable Pavements Help Solve Australian Flooding?". AZoM.com. 2022-04-22. Retrieved 2022-05-21.
19. ^ Delatte, Norbert J. (22 May 2014). Concrete pavement design, construction, and performance (Second ed.). Boca Raton. p. 125\. ISBN 978-1-4665-7511-0. OCLC 880702362.`{{cite book}}`: CS1 maint: location missing publisher (link)
20. ^ "Pavement Drainage". Virginia Asphalt Association. Retrieved 2 May 2023.
21. ^ "Pavement Management Primer" (PDF). Federal Highway Administration, U.S Department of Transportation. Retrieved 9 January 2011.
22. ^ a b c d e f g Karlsson, Robert; Isacsson, Ulf (2006-02-01). "Material-Related Aspects of Asphalt Recycling—State-of-the-Art". Journal of Materials in Civil Engineering. 18 (1): 81–92. doi:10.1061/(asce)0899-1561(2006)18:1(81). ISSN 0899-1561.
23. ^ a b c d e Williams, Brett. "Asphalt Pavement Industry Survey on Recycled Materials and Warm-Mix Asphalt Usage 2019 (Information Series 138) 10th Annual Survey". National Asphalt Pavement Association. Retrieved 2020-12-14.
24. ^ a b c d e f Silva, Hugo; Oliveira, Joel; Jesus, Carlos (2012-03-01). "Are totally recycled hot mix asphalts a sustainable alternative for road paving?". Resources, Conservation, and Recycling. 60: 38–48. doi:10.1016/j.resconrec.2011.11.013.
25. ^ a b Haas, Edwin; Ericson, Christopher L.; Bennert, Thomas (2019-11-30). "Laboratory designed hot mix asphalt mixtures with post-consumer Recycled Asphalt Shingles (RAS) utilizing AASHTO PP78". Construction and Building Materials. 226: 662–672. doi:10.1016/j.conbuildmat.2019.07.314. ISSN 0950-0618. S2CID 201284220.
26. ^ Blades, Christopher; Kearney, Edward; Nelson, Gary (2018-05-01). "Asphalt Paving Principles". Cornell Local Roads Program.
27. ^ Speight, James G. (2016-01-01), Speight, James G. (ed.), "Chapter 9 - Asphalt Technology", Asphalt Materials Science and Technology, Boston: Butterworth-Heinemann, pp. 361–408, doi:10.1016/b978-0-12-800273-5.00009-x, ISBN 978-0-12-800273-5, retrieved 2020-12-16
28. ^ a b c d e f Zaumanis, Martins; Mallick, Rajib B.; Frank, Robert (2014-10-30). "Determining optimum rejuvenator dose for asphalt recycling based on Superpave performance grade specifications". Construction and Building Materials. 69: 159–166. doi:10.1016/j.conbuildmat.2014.07.035. ISSN 0950-0618.
29. ^ a b c d Al-Qadi, Imad; Elseifi, Mostafa; Carpenter, Samuel (2007-03-01). "Reclaimed Asphalt Pavement – A Literature Review". CiteSeerX 10.1.1.390.3460.
30. ^ a b Wang, He; Rath, Punyaslok; Buttlar, William G. (2020-04-01). "Recycled asphalt shingle modified asphalt mixture design and performance evaluation". Journal of Traffic and Transportation Engineering (English Edition). 7 (2): 205–214. doi:10.1016/j.jtte.2019.09.004. ISSN 2095-7564.
31. ^ Saberi.K, Farshad; Fakhri, Mansour; Azami, Ahmad (2017-11-01). "Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement and crumb rubber". Journal of Cleaner Production. 165: 1125–1132. doi:10.1016/j.jclepro.2017.07.079. ISSN 0959-6526.
32. ^ Kocak, Salih; Kutay, M. Emin (2017-01-02). "Use of crumb rubber in lieu of binder grade bumping for mixtures with high percentage of reclaimed asphalt pavement". Road Materials and Pavement Design. 18 (1): 116–129. doi:10.1080/14680629.2016.1142466. ISSN 1468-0629. S2CID 137932692.
33. ^ "Bill Text - AB-338 Recycling: crumb rubber". leginfo.legislature.ca.gov. Retrieved 2020-12-17.
34. ^ Rahman, Md Tareq; Mohajerani, Abbas; Giustozzi, Filippo (2020-03-25). "Recycling of Waste Materials for Asphalt Concrete and Bitumen: A Review". Materials. 13 (7): 1495. Bibcode:2020Mate...13.1495R. doi:10.3390/ma13071495. PMC 7177983. PMID 32218261.
35. ^ Zhu, Jiasheng; Saberian, Mohammad; Li, Jie; Yaghoubi, Ehsan; Rahman, Md Tareq (2023-09-22). "Sustainable use of COVID-19 discarded face masks to improve the performance of stone mastic asphalt". Construction and Building Materials. 398: 132524. doi:10.1016/j.conbuildmat.2023.132524. ISSN 0950-0618. S2CID 260027537.

[1]

* v
* t
* e

Road hierarchy

Types of road|

| Limited-access|

* Bike freeway
* Freeway / Motorway
* Dual carriageway / Divided highway / Expressway
* Elevated highway

|

By country|

* Australia
* Belgium
* Brazil
* Canada
* China (Hong Kong)
* Croatia
* Czech Republic
* Germany
* Greece
* India
* Ireland
* Italy
* Nepal
* Pakistan
* Poland
* Portugal
* Spain
* Taiwan
* United Kingdom
* United States

Main roads|

* Arterial road
* Collector road
* County highway
* Express-collector setup
* Farm-to-market road
* Highway
* Link road
* Two-lane expressway
* 2+1 road
* 2+2 road
* Parkway
* Ring road
* Super two
* Trunk road
* Highway systems by country

Local roads|

* Alley
* Avenue
* Backroad
* Bicycle boulevard
* Boulevard
* Country lane
* Dead end
* Driveway
* Frontage road
* Green lane
* Main street
* Primitive road
* Road
* Side road
* Single carriageway
* Single-track road
* Street
* Sunken lane

Other terms|

* Channelization
* Concurrency
* Detour
* Hierarchy of roads
* Private highway
* Route number
* special route
* business route
* Street hierarchy
* Stroad
* Toll road
* Winter road

Road junctions|

Interchanges
(grade-separated)

* Cloverleaf
* Diamond
* Free-flow
* Directional T
* Diverging diamond
* Parclo
* Raindrop
* Roundabout
* Single-point urban (SPUI)
* Stack
* Three-level diamond
* Trumpet

|

Intersections
(at-grade)

* 3-way junction
* Bowtie
* Box junction
* Continuous flow
* Hook turn
* Jughandle
* Michigan left
* Offset T-intersection
* Protected intersection
* Quadrant roadway
* Right-in/right-out (RIRO)
* Roundabout
* Seagull intersection
* Split intersection
* Superstreet
* Texas U-turn
* Turnaround

Surfaces|

* Asphalt concrete
* Bioasphalt
* Brick
* Chipseal
* Cobblestone
* Concrete
* Reinforced concrete
* Corduroy
* Crocodile cracking
* Crushed stone
* Diamond grinding of pavement
* Dirt
* Full depth recycling
* Glassphalt
* Gravel
* Ice
* Macadam
* Pavement milling
* Permeable
* Plank
* Plastic
* Rubberized asphalt
* Sealcoat
* Sett
* Stamped asphalt
* Tarmac
* Texture

Road safety
factors|

| Road and
environment|

* Aquaplaning
* Avalanche
* Black ice
* Bleeding
* Crosswind
* Dead Man's Curve
* Expansion joint
* Fog
* Ford
* Hairpin turn
* Level crossing
* Manhole cover
* Oil spill
* Oversize load
* Pothole
* Road debris
* Road slipperiness
* Road train
* Roadkill
* Rockfall
* Rut
* Speed bump
* Storm drain
* Washboarding
* Washout
* Whiteout
* Snowsquall

|

Human factors|

* Driver's education
* Driving under the influence
* Drowsy driving
* Road rage
* Single-vehicle crash

Vehicles|

* Airbag
* Automotive safety
* Seat belts
* Risk compensation (road transport)
* Underride guard

Space and
time allocation|

* Barrier transfer machine
* Bicycle lane
* Climbing lane
* Complete streets
* Contraflow lane
* Contraflow lane reversal
* High-occupancy toll lane
* High-occupancy vehicle lane
* Lane
* Living street
* Managed lane
* Median / Central reservation
* Motorcycle lane
* Passing lane
* Pedestrian crossing
* Pedestrian zone
* Refuge island
* Reversible lane
* Road diet
* Road verge
* Runaway truck ramp
* Shared space
* Sidewalk / Pavement
* Shoulder
* Street running railway
* Traffic calming
* Traffic directionality
* Traffic island
* Traffic lanes
* Traffic signal preemption
* Truck bypass
* Unused highway
* Wide outside lane
* Woonerf

Demarcation|

* Bollard
* Botts' dots
* Cable barrier
* Cat's eye (road)
* Concrete step barrier
* Constant-slope barrier
* Curb
* F-Shape barrier
* Guard rail
* Jersey barrier
* Kassel kerb
* Noise barrier
* Raised pavement marker
* Road surface marking
* Rumble strip
* Traffic barrier
* Traffic cone

Structures|

* Bridge
* Causeway
* Overpass / Flyover
* Underpass / Tunnel

Performance
indicators|

* Pavement condition index
* International roughness index
* Present serviceability index
* Pavement performance modeling
* Granular base equivalency

* Glossary of road transport terms
* Road types by features

* v
* t
* e

Recycling

Materials|

* Aluminium
* Asphalt
* Concrete
* Copper
* Cotton
* Energy
* Glass
* Gypsum
* Paper
* Plastic
* Refrigerant
* Scrap
* Timber
* Cooking oil
* Water

Products|

* Appliances
* Automotive oil
* Batteries
* Bottles
* PET bottles
* Computers
* Drugs
* Fluorescent lamps
* Lumber
* Mobile phones
* Paint
* Ships
* Textiles
* Tires
* Vehicles

Apparatus|

* Bins
* Blue bags
* Blue boxes
* Codes
* Collection
* Materials recovery facility
* Waste sorting

Countries|

* Rate by country
* Australia
* Brazil
* Canada
* Ireland
* Israel
* Japan
* Malaysia
* The Netherlands
* Switzerland
* Taiwan
* United Kingdom
* Northern Ireland
* United States

Concepts|

* Circular economy
* Dematerialization
* Downcycling
* Durable good
* Eco-industrial park
* Ecodesign
* Extended producer responsibility
* Green economy
* Industrial ecology
* Industrial metabolism
* Interchangeable parts
* Land recycling
* Material flow analysis
* Precycling
* Product stewardship
* Recycling (ecological)
* Refill (scheme)
* Repairability
* Resource recovery
* Reusable packaging
* Reuse of bottles
* Reuse of excreta
* Repurposing
* Reuse
* Right to repair
* Symbol (Green Dot)
* Upcycling
* Urban lumberjacking
* Waste hierarchy
* Waste minimisation
* Waste picking
* Wishcycling
* Zero waste

See also|

* Cogeneration
* Composting
* Container deposit legislation
* Dumpster diving
* Ethical consumerism
* Freeganism
* Reverse vending machine
* Simple living
* Waste
* Waste-to-energy
* Waste collection
* Waste management law
* Waste management

* Environment portal
* Category
* by country
* by material
* by product
* organizations
* Index
* Commons

Authority control databases

National|

* France
* BnF data
* Germany
* Israel
* United States
* Latvia
* Czech Republic

Other|

* NARA

1. ^ "Asphalt Calculator". asphaltcalculators.com. 2023-08-12. Retrieved 2023-09-17.

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template