Boron

This article is about the chemical element. For other uses, see Boron (disambiguation).

Chemical element with atomic number 5 (B)

Boron, 5B

boron (β-rhombohedral)[1]

Boron
Pronunciation| /ˈbɔːrɒn/ ⓘ ​(BOR-on)
Allotropes| α-, β-rhombohedral, β-tetragonal (and more)
Appearance| black-brown
Standard atomic weight Ar°(B)

* [10.806, 10.821][2]
* 10.81±0.02 (abridged)[3]

Boron in the periodic table
|  |

| Hydrogen |  | Helium

|
|

Lithium | Beryllium |  | Boron | Carbon | Nitrogen | Oxygen | Fluorine | Neon
Sodium | Magnesium |  | Aluminium | Silicon | Phosphorus | Sulfur | Chlorine | Argon
Potassium | Calcium |  | Scandium | Titanium | Vanadium | Chromium | Manganese | Iron | Cobalt | Nickel | Copper | Zinc | Gallium | Germanium | Arsenic | Selenium | Bromine | Krypton
Rubidium | Strontium |  |  | Yttrium | Zirconium | Niobium | Molybdenum | Technetium | Ruthenium | Rhodium | Palladium | Silver | Cadmium | Indium | Tin | Antimony | Tellurium | Iodine | Xenon
Caesium | Barium | Lanthanum | Cerium | Praseodymium | Neodymium | Promethium | Samarium | Europium | Gadolinium | Terbium | Dysprosium | Holmium | Erbium | Thulium | Ytterbium | Lutetium | Hafnium | Tantalum | Tungsten | Rhenium | Osmium | Iridium | Platinum | Gold | Mercury (element) | Thallium | Lead | Bismuth | Polonium | Astatine | Radon
Francium | Radium | Actinium | Thorium | Protactinium | Uranium | Neptunium | Plutonium | Americium | Curium | Berkelium | Californium | Einsteinium | Fermium | Mendelevium | Nobelium | Lawrencium | Rutherfordium | Dubnium | Seaborgium | Bohrium | Hassium | Meitnerium | Darmstadtium | Roentgenium | Copernicium | Nihonium | Flerovium | Moscovium | Livermorium | Tennessine | Oganesson

beryllium ← boron → carbon
Atomic number (Z)| 5
Group| group 13 (boron group)
Period| period 2
Block|   p-block
Electron configuration| [He] 2s2 2p1
Electrons per shell| 2, 3
Physical properties
Phase at STP| solid
Melting point| 2349 K ​(2076 °C, ​3769 °F)
Boiling point| 4200 K ​(3927 °C, ​7101 °F)
Density when liquid (at m.p.)| 2.08 g/cm3
Heat of fusion| 50.2 kJ/mol
Heat of vaporization| 508 kJ/mol
Molar heat capacity| 11.087 J/(mol·K)
Vapor pressure

| P (Pa) | 1  | 10  | 100  | 1 k  | 10 k  | 100 k

|
|
|
|
|
|

at T (K) | 2348  | 2562  | 2822  | 3141  | 3545  | 4072

Atomic properties
Oxidation states| common: +3
−5,[4] −1,[5] 0,[6] +1,[7][8] +2[7]
Electronegativity| Pauling scale: 2.04
Ionization energies|

* 1st: 800.6 kJ/mol
* 2nd: 2427.1 kJ/mol
* 3rd: 3659.7 kJ/mol
* (more)

Atomic radius| empirical: 90 pm
Covalent radius| 84±3 pm
Van der Waals radius| 192 pm
Spectral lines of boron
Other properties
Natural occurrence| primordial
Crystal structure|  ​rhombohedral

Thermal expansion| β form: 5–7 µm/(m⋅K) (at 25 °C)[9]
Thermal conductivity| 27.4 W/(m⋅K)
Electrical resistivity| ~106 Ω⋅m (at 20 °C)
Magnetic ordering| diamagnetic[10]
Molar magnetic susceptibility| −6.7×10−6 cm3/mol[10]
Speed of sound thin rod| 16,200 m/s (at 20 °C)
Mohs hardness| ~9.5
CAS Number| 7440-42-8
History
Naming| after borax, from which it was isolated; Ultimately from Arabic بَوْرَق (bawraq)
Discovery| Joseph Louis Gay-Lussac and Louis Jacques Thénard[11] (30 June 1808)
First isolation| Humphry Davy[12] (9 July 1808)
Isotopes of boron

* v
* e

| Main isotopes  | Decay

|

| abun­dance | half-life (t1/2) | mode | pro­duct
8B  | synth | 771.9 ms  | β+ | 8Be
10B  | [18.9%, 20.4%]  | stable
11B  | [79.6%, 81.1%]  | stable
Category: Boron

* view
* talk
* edit

| references

Boron is a chemical element; it has symbol B and atomic number 5\. In its crystalline form it is a brittle, dark, lustrous metalloid; in its amorphous form it is a brown powder. As the lightest element of the boron group it has three valence electrons for forming covalent bonds, resulting in many compounds such as boric acid, the mineral sodium borate, and the ultra-hard crystals of boron carbide and boron nitride.

Boron is synthesized entirely by cosmic ray spallation and supernovas and not by stellar nucleosynthesis, so it is a low-abundance element in the Solar System and in the Earth's crust.[13] It constitutes about 0.001 percent by weight of Earth's crust.[14] It is concentrated on Earth by the water-solubility of its more common naturally occurring compounds, the borate minerals. These are mined industrially as evaporites, such as borax and kernite. The largest known deposits are in Turkey, the largest producer of boron minerals.

Elemental boron is found in small amounts in meteoroids, but chemically uncombined boron is not otherwise found naturally on Earth.

Several allotropes exist: amorphous boron is a brown powder; crystalline boron is silvery to black, extremely hard (9.3 on the Mohs scale), and a poor electrical conductor at room temperature (1.5 × 10−6 Ω−1 cm−1 room temperature electrical conductivity).[15] The primary use of the element itself is as boron filaments with applications similar to carbon fibers in some high-strength materials.

Boron is primarily used in chemical compounds. About half of all production consumed globally is an additive in fiberglass for insulation and structural materials. The next leading use is in polymers and ceramics in high-strength, lightweight structural and heat-resistant materials. Borosilicate glass is desired for its greater strength and thermal shock resistance than ordinary soda lime glass. As sodium perborate, it is used as a bleach. A small amount is used as a dopant in semiconductors, and reagent intermediates in the synthesis of organic fine chemicals. A few boron-containing organic pharmaceuticals are used or are in study. Natural boron is composed of two stable isotopes, one of which (boron-10) has a number of uses as a neutron-capturing agent.

Borates have low toxicity in mammals (similar to table salt) but are more toxic to arthropods and are occasionally used as insecticides. Boron-containing organic antibiotics are known. Although only traces are required, it is an essential plant nutrient.

## History

[edit]

Amorphous boron powder

The word boron was coined from borax, the mineral from which it was isolated, by analogy with carbon, which boron resembles chemically.[16]

Sassolite

Borax in its mineral form (then known as tincal) first saw use as a glaze, beginning in China circa 300 AD. Some crude borax traveled westward, and was apparently mentioned by the alchemist Jabir ibn Hayyan around 700 AD. Marco Polo brought some glazes back to Italy in the 13th century. Georgius Agricola, in around 1600, reported the use of borax as a flux in metallurgy. In 1777, boric acid was recognized in the hot springs (soffioni) near Florence, Italy, at which point it became known as sal sedativum, with ostensible medical benefits. The mineral was named sassolite, after Sasso Pisano in Italy. Sasso was the main source of European borax from 1827 to 1872, when American sources replaced it.[17][18] Boron compounds were rarely used until the late 1800s when Francis Marion Smith's Pacific Coast Borax Company first popularized and produced them in volume at low cost.[19]

Boron was not recognized as an element until it was isolated by Sir Humphry Davy[12] and by Joseph Louis Gay-Lussac and Louis Jacques Thénard.[11] In 1808 Davy observed that electric current sent through a solution of borates produced a brown precipitate on one of the electrodes. In his subsequent experiments, he used potassium to reduce boric acid instead of electrolysis. He produced enough boron to confirm a new element and named it boracium.[12] Gay-Lussac and Thénard used iron to reduce boric acid at high temperatures. By oxidizing boron with air, they showed that boric acid is its oxidation product.[11][20] Jöns Jacob Berzelius identified it as an element in 1824.[21] Pure boron was arguably first produced by the American chemist Ezekiel Weintraub in 1909.[22][23][24]

## Characteristics of the element

[edit]

### Isotopes

[edit]

Main article: Isotopes of boron

Boron has two naturally occurring and stable isotopes, 11B (80.1%) and 10B (19.9%). The mass difference results in a wide range of δ11B values, which are defined as a fractional difference between the 11B and 10B and traditionally expressed in parts per thousand, in natural waters ranging from −16 to +59. There are 13 known isotopes of boron; the shortest-lived isotope is 7B which decays through proton emission and alpha decay with a half-life of 3.5×10−22 s. Isotopic fractionation of boron is controlled by the exchange reactions of the boron species B(OH)3 and [B(OH)4]−. Boron isotopes are also fractionated during mineral crystallization, during H2O phase changes in hydrothermal systems, and during hydrothermal alteration of rock. The latter effect results in preferential removal of the [10B(OH)4]− ion onto clays. It results in solutions enriched in 11B(OH)3 and therefore may be responsible for the large 11B enrichment in seawater relative to both oceanic crust and continental crust; this difference may act as an isotopic signature.[25]

The exotic 17B exhibits a nuclear halo, i.e. its radius is appreciably larger than that predicted by the liquid drop model.[26]

#### NMR spectroscopy

[edit]

Both 10B and 11B possess nuclear spin. The nuclear spin of 10B is 3 and that of 11B is ⁠3/2⁠. These isotopes are, therefore, of use in nuclear magnetic resonance spectroscopy; and spectrometers specially adapted to detecting the boron-11 nuclei are available commercially. The 10B and 11B nuclei also cause splitting in the resonances of attached nuclei.[27]

### Allotropes

[edit]

Main article: Allotropes of boron

Boron chunks

Boron forms four major allotropes: α-rhombohedral[28] and β-rhombohedral[29] (α-R and β-R), γ-orthorhombic[30] (γ) and β-tetragonal[31] (β-T). All four phases are stable at ambient conditions, and β-rhombohedral is the most common and stable. An α-tetragonal phase also exists (α-T), but is very difficult to produce without significant contamination. Most of the phases are based on B12 icosahedra, but the γ phase can be described as a rocksalt-type arrangement of the icosahedra and B2 atomic pairs.[32] It can be produced by compressing other boron phases to 12–20 GPa and heating to 1500–1800 °C; it remains stable after releasing the temperature and pressure. The β-T phase is produced at similar pressures, but higher temperatures of 1800–2200 °C. The α-T and β-T phases might coexist at ambient conditions, with the β-T phase being the more stable.[32][33][34] Compressing boron above 160 GPa produces a boron phase with an as yet unknown structure, and this phase is a superconductor at temperatures below 6–12 K.[35][36]

Boron phase  | α-R  | β-R  | γ  | β-T

|
|
|
|

Symmetry  | Rhombohedral | Rhombohedral | Orthorhombic | Tetragonal
Atoms/unit cell[32] | 12  | ~105  | 28  |
Density (g/cm3)[37][38][39][40] | 2.46  | 2.35  | 2.52  | 2.36
Vickers hardness (GPa)[41][42] | 42  | 45  | 50–58  |
Bulk modulus (GPa)[42][43] | 185  | 224  | 227  |
Bandgap (eV)[42][44] | 2  | 1.6  | 2.1  |

### Atomic structure

[edit]

Atomic boron is the lightest element having an electron in a p-orbital in its ground state. Its first three ionization energies are higher than those for heavier group III elements, reflecting its electropositive character.[45]

## Chemistry of the element

[edit]

Main article: Boron compounds

### Preparation

[edit]

Elemental boron is rare and poorly studied because the pure material is extremely difficult to prepare. Most studies of "boron" involve samples that contain small amounts of carbon. Very pure boron is produced with difficulty because of contamination by carbon or other elements that resist removal.[46]

Some early routes to elemental boron involved the reduction of boric oxide with metals such as magnesium or aluminium. However, the product was often contaminated with borides of those metals.[47] Pure boron can be prepared by reducing volatile boron halides with hydrogen at high temperatures. Ultrapure boron for use in the semiconductor industry is produced by the decomposition of diborane at high temperatures and then further purified by the zone melting or Czochralski processes.[48]

### Reactions of the element

[edit]

Crystalline boron is a hard, black material with a melting point of above 2000 °C. Crystalline boron is chemically inert and resistant to attack by boiling hydrofluoric or hydrochloric acid. When finely divided, it is attacked slowly by hot concentrated hydrogen peroxide, hot concentrated nitric acid, hot sulfuric acid or hot mixture of sulfuric and chromic acids.[23]

Since elemental boron is very rare, its chemical reactions are of little significance practically speaking. The elemental form is not typically used as a precursor to compounds. Instead, the extensive inventory of boron compounds are produced from borates.[49]

When exposed to air, under normal conditions, a protective oxide or hydroxide layer forms on the surface of boron, which prevents further corrosion.[50] The rate of oxidation of boron depends on the crystallinity, particle size, purity and temperature. At higher temperatures boron burns to form boron trioxide:[51]

4 B + 3 O2 → 2 B2O3
Ball-and-stick model of tetraborate anion, [B4O5(OH)4]2−, as it occurs in crystalline borax, Na2[B4O5(OH)4]·8H2O. Boron atoms are pink, with bridging oxygens in red, and four hydroxyl hydrogens in white. Note two borons are trigonally bonded sp2 with no formal charge, while the other two borons are tetrahedrally bonded sp3, each carrying a formal charge of −1. The oxidation state of all borons is III. This mixture of boron coordination numbers and formal charges is characteristic of natural boron minerals.

## Chemical compounds

[edit]

Main article: boron compounds

### General trends

[edit]

In some ways, boron is comparable to carbon in its capability to form stable covalently bonded molecular networks (even nominally disordered (amorphous) boron contains boron icosahedra, which are bonded randomly to each other without long-range order.[52][53]). In terms of chemical behavior, boron compounds resembles silicon. Aluminium, the heavier congener of boron, does not behave analogously to boron: it is far more electropositive, it is larger, and it tends not to form homoatomic Al-Al bonds. In the most familiar compounds, boron has the formal oxidation state III. These include the common oxides, sulfides, nitrides, and halides, as well as organic derivatives[51]

Boron compounds often violate the octet rule.[54][16]

### Halides

[edit]

Boron forms the complete series of trihalides, i.e. BX3 (X = F, Cl, Br, I). The trifluoride is produced by treating borate salts with hydrogen fluoride, while the trichloride is produced by carbothermic reduction of boron oxides in the presence of chlorine gas:[49][51]

B2O3 \+ 3 C + 6 Cl2 → 2 BCl3 \+ 3 CO
Boron (III) trifluoride structure, showing "empty" boron p orbital in pi-type coordinate covalent bonds

The trihalides adopt a planar trigonal structures, in contrast to the behavior of aluminium trihalides. All charge-neutral boron halides violate the octet rule, hence they typically are Lewis acidic. For example, boron trifluoride (BF3) combines eagerly with fluoride sources to give the tetrafluoroborate anion, BF4−. Boron trifluoride is used in the petrochemical industry as a catalyst. The halides react with water to form boric acid.[51] Other boron halides include those with B-B bonding, such as B2F4 and B4Cl4.[55]

### Oxide derivatives

[edit]

Boron-containing minerals exclusively exist as oxides of B(III), often associated with other elements. More than one hundred borate minerals are known. These minerals resemble silicates in some respect, although it is often found not only in a tetrahedral coordination with oxygen, but also in a trigonal planar configuration. The borates can be subdivided into two classes, anhydrous and the far more common hydrates. The hydrates contain B-OH groups and sometimes water of crystallization. A typical motif is exemplified by the tetraborate anions of the common mineral borax. The formal negative charge of the tetrahedral borate center is balanced by sodium (Na+).[51] Some idea of the complexity of these materials is provided by the inventory of zinc borates, which are common wood preservatives and fire retardants:[56] 4ZnO·B2O3·H2O, ZnO·B2O3·1.12H2O, ZnO·B2O3·2H2O, 6ZnO·5B2O3·3H2O, 2ZnO·3B2O3·7H2O, 2ZnO·3B2O3·3H2O, 3ZnO·5B2O3·14H2O, and ZnO·5B2O3·4.5H2O.[57]

As illustrated by the preceding examples, borate anions tend to condense by formation of B-O-B bonds. Borosilicates, with B-O-Si, and borophosphates, with B-O-P linkages, are also well represented in both minerals and synthetic compounds.[58]

Related to the oxides are the alkoxides and boronic acids with the formula B(OR)3 and R2BOH, respectively. Boron forms a wide variety of such metal-organic compounds, some of which are used in the synthesis of pharmaceuticals. These developments, especially the Suzuki reaction, was recognized with the 2010 Nobel Prize in Chemistry to Akira Suzuki.[59]

### Hydrides

[edit]

Main article: Boranes

Ball-and-stick models showing the structures of the boron skeletons of borane clusters. The structures can be rationalised by polyhedral skeletal electron pair theory.[60]

Boranes and borohydrides are neutral and anionic compounds of boron and hydrogen, respectively. Sodium borohydride is the progenitor of the boranes. Sodium borohydride is obtained by hydrogenation of trimethylborate:[49]

B(OCH3)3 \+ 4 Na + 2H2 → NaBH4 \+ 3 NaOCH3

Sodium borohydride is a white, fairly air-stable salt.

Sodium borohydride converts to diborane by treatment with boron trifluoride:[49]

3 NaBH4 \+ 4 BF3 → 2 (BH3)2 \+ 3 NaBF4

Diborane is the dimer of the elusive parent called borane, BH3. Having a formula akin to ethane's (C2H6), diborane adopts a very different structure, featuring a pair of bridging H atoms. This unusual structure, which was deduced only in the 1940s, was an early indication of the many surprises provided by boron chemistry.[49]

Structure of diborane

Pyrolysis of diborane gives boron hydride clusters, such as pentaborane(9) B5H9 and decaborane B10H14.[55]: 164, 170, 173  A large number of anionic boron hydrides are also known, e.g. [B12H12]2−. In these cluster compounds, boron has a coordination number greater than four.[51] The analysis of the bonding in these polyhedra clusters earned William N. Lipscomb the 1976 Nobel Prize in Chemistry for "studies on the structure of boranes illuminating problems of chemical bonding". Not only are their structures unusual, many of the boranes are extremely reactive. For example, a widely used procedure for pentaborane states that it will "spontaneously inflame or explode in air".[61]

### Organoboron compounds

[edit]

Main article: Organoboron chemistry

A large number of organoboron compounds, species with B-C bonds, are known. Many organoboron compounds are produced from hydroboration, the addition of B-H bonds to C=C and C≡C bonds.[62] Diborane is traditionally used for such reactions, as illustrated by the preparation of trioctylborane:[63]

B2H6 \+ 6 H2C=CH(CH2)5CH3 → 2 B((CH2)7CH3)3

This regiochemistry, i.e. the tendency of B to attach to the terminal carbon - is explained by the polarization of the bonds in boranes, which is indicated as Bδ+-Hδ-.[55]: 144, 166

Hydroboration opened the doors for many subsequent reactions, several of which are useful in the synthesis of complex organic compounds.[64] The significance of these methods was recognized by the award of Nobel Prize in Chemistry to H. C. Brown in 1979. Even complicated boron hydrides, such as decaborane undergo hydroboration.[65] Like the volatile boranes, the alkyl boranes ignite spontaneously in air.

In the 1950s, several studies examined the use of boranes as energy-increasing "Zip fuel" additives for jet fuel.[66]

Triorganoboron(III) compounds are trigonal planar and exhibit weak Lewis acidity. The resulting adducts are tetrahedral. This behavior contrasts with that of triorganoaluminium compounds (see trimethylaluminium), which are tetrahedral with bridging alkyl groups.[citation needed]

A compound with the B≡C triple bond was synthesized for the first time in 2025.[67]

### Nitrides

[edit]

Main article: Boron nitride

The boron-nitrides follow the pattern of avoiding B-B and N-N bonds: only B-N bonding is observed generally. The boron nitrides exhibit structures analogous to various allotropes of carbon, including graphite, diamond, and nanotubes. This similarity reflects the fact that B and N have eight valence electrons as does a pair of carbon atoms. In cubic boron nitride (tradename Borazon), boron and nitrogen atoms are tetrahedral, just like carbon in diamond. Cubic boron nitride, among other applications, is used as an abrasive, as its hardness is comparable with that of diamond. Hexagonal boron nitride (h-BN) is the BN analogue of graphite, consisting of sheets of alternating B and N atoms. These sheets stack with boron and nitrogen in registry between the sheets. Graphite and h-BN have very different properties, although both are lubricants, as these planes slip past each other easily. However, h-BN is a relatively poor electrical and thermal conductor in the planar directions.[68][69] Molecular analogues of boron nitrides are represented by borazine, (BH)3(NH)3.[citation needed]

### Carbides

[edit]

Unit cell of B4C. The green sphere and icosahedra consist of boron atoms, and black spheres are carbon atoms.[70]

Boron carbide is a ceramic material. It is obtained by carbothermal reduction of B2O3in an electric furnace:[71]

2 B2O3 \+ 7 C → B4C + 6 CO

Boron carbide's structure is only approximately reflected in its formula of B4C, and it shows a clear depletion of carbon from this suggested stoichiometric ratio. This is due to its very complex structure. The substance can be seen with empirical formula B12C3 (i.e., with B12 dodecahedra being a motif), but with less carbon, as the suggested C3 units are replaced with C-B-C chains, and some smaller (B6) octahedra are present as well (see the boron carbide article for structural analysis). The repeating polymer plus semi-crystalline structure of boron carbide gives it great structural strength per weight.[citation needed]

### Borides

[edit]

Ball-and-stick model of superconductor magnesium diboride. Boron atoms lie in hexagonal aromatic graphite-like layers, with a charge of −1 on each boron atom. Magnesium(II) ions lie between layers

Binary metal-boron compounds, the metal borides, contain only boron and a metal. They are metallic, very hard, with high melting points. TiB2, ZrB2, and HfB2 have melting points above 3000 °C.[69] Some metal borides find specialized applications as hard materials for cutting tools.[72]

## Occurrence

[edit]

Main article: Borate minerals

See also: Category:Borate minerals

Borax crystals

Boron is rare in the universe and solar system. The amount of boron formed in the Big Bang is negligible. Boron is not generated in the normal course of stellar nucleosynthesis and is destroyed in stellar interiors.[73]

In the high oxygen environment of the Earth's surface, boron is always found fully oxidized to borate. Boron does not appear on Earth in elemental form. Extremely small traces of elemental boron were detected in Lunar regolith.[74][75]

Although boron is a relatively rare element in the Earth's crust, representing only 0.001% of the crust mass, it can be highly concentrated by the action of water, in which many borates are soluble. It is found naturally combined in compounds such as borax and boric acid (sometimes found in volcanic spring waters). About a hundred borate minerals are known.[citation needed]

## Production

[edit]

A fragment of ulexite

Economically important sources of boron are the minerals colemanite, rasorite (kernite), ulexite and tincal. Together these constitute 90% of mined boron-containing ore. The largest global borax deposits known, many still untapped, are in Central and Western Turkey, including the provinces of Eskişehir, Kütahya and Balıkesir.[76][77][78] Global proven boron mineral mining reserves exceed one billion metric tonnes, against a yearly production of about four million tonnes.[79]

Turkey and the United States are the largest producers of boron products. Turkey produces about half of the global yearly demand, through Eti Mine Works (Turkish: Eti Maden İşletmeleri) a Turkish state-owned mining and chemicals company focusing on boron products. It holds a government monopoly on the mining of borate minerals in Turkey, which possesses 72% of the world's known deposits.[80] In 2012, it held a 47% share of production of global borate minerals, ahead of its main competitor, Rio Tinto Group.[81]

Almost a quarter (23%) of global boron production comes from the Rio Tinto Borax Mine (also known as the U.S. Borax Boron Mine) 35°2′34.447″N 117°40′45.412″W﻿ / ﻿35.04290194°N 117.67928111°W﻿ / 35.04290194; -117.67928111﻿ (Rio Tinto Borax Mine) near Boron, California.[82][83]

### Market trend

[edit]

The average cost of crystalline elemental boron is US$5/g.[84] Elemental boron is chiefly used in making boron fibers, where it is deposited by chemical vapor deposition on a tungsten core (see below). Boron fibers are used in lightweight composite applications, such as high strength tapes. This use is a very small fraction of total boron use. Boron is introduced into semiconductors as boron compounds, by ion implantation.[citation needed]

Estimated global consumption of boron (almost entirely as boron compounds) was about 4 million tonnes of B2O3 in 2012. As compounds such as borax and kernite its cost was US$377/tonne in 2019.[85]

Increasing demand for boric acid has led a number of producers to invest in additional capacity. Turkey's state-owned Eti Mine Works opened a new boric acid plant with the production capacity of 100,000 tonnes per year at Emet in 2003. Rio Tinto Group increased the capacity of its boron plant from 260,000 tonnes per year in 2003 to 310,000 tonnes per year by May 2005, with plans to grow this to 366,000 tonnes per year in 2006. Chinese boron producers have been unable to meet rapidly growing demand for high quality borates. This has led to imports of sodium tetraborate (borax) growing by a hundredfold between 2000 and 2005 and boric acid imports increasing by 28% per year over the same period.[86][87]

The rise in global demand has been driven by high growth rates in glass fiber, fiberglass and borosilicate glassware production. A rapid increase in the manufacture of reinforcement-grade boron-containing fiberglass in Asia, has offset the development of boron-free reinforcement-grade fiberglass in Europe and the US. The recent rises in energy prices may lead to greater use of insulation-grade fiberglass, with consequent growth in the boron consumption. Roskill Consulting Group forecasts that world demand for boron will grow by 3.4% per year to reach 21 million tonnes by 2010. The highest growth in demand is expected to be in Asia where demand could rise by an average 5.7% per year.[86][88]

## Applications

[edit]

Nearly all boron ore extracted from the Earth is refined as boric acid and sodium tetraborate pentahydrate. In the United States, 70% of the boron is used for the production of glass and ceramics.[89][90] The major global industrial-scale use of boron compounds (about 46% of end-use) is in production of glass fiber for boron-containing insulating and structural fiberglasses, especially in Asia. Boron is added to the glass as borax pentahydrate or boron oxide, to influence the strength or fluxing qualities of the glass fibers.[91] Another 10% of global boron production is for borosilicate glass as used in high strength glassware. About 15% of global boron is used in boron ceramics, including super-hard materials discussed below. Agriculture consumes 11% of global boron production, and bleaches and detergents about 6%.[92]

### Boronated fiberglass

[edit]

Main article: Fiberglass

Fiberglasses, a fiber reinforced polymer sometimes contain borosilicate, borax, or boron oxide, and is added to increase the strength of the glass. The highly boronated glasses, E-glass (named for "Electrical" use) are alumino-borosilicate glass. Another common high-boron glasses, C-glass, also has a high boron oxide content, used for glass staple fibers and insulation. D-glass, a borosilicate glass, named for its low dielectric constant.[93]

Because of the ubiquitous use of fiberglass in construction and insulation, boron-containing fiberglasses consume over half the global production of boron, and are the single largest commercial boron market.[94]

### Borosilicate glass

[edit]

Main article: Borosilicate glass

Borosilicate glassware. Displayed are two beakers and a test tube.

Borosilicate glass, which is typically 12–15% B2O3, 80% SiO2, and 2% Al2O3, has a low coefficient of thermal expansion, giving it a good resistance to thermal shock. Schott AG's "Duran" and Owens-Corning's trademarked Pyrex are two major brand names for this glass, used both in laboratory glassware and in consumer cookware and bakeware, chiefly for this resistance.[95]

### Elemental boron fiber

[edit]

Boron fibers (boron filaments) are high-strength, lightweight materials that are used chiefly for advanced aerospace structures as a component of composite materials, as well as limited production consumer and sporting goods such as golf clubs and fishing rods.[96][97] The fibers can be produced by chemical vapor deposition of boron on a tungsten filament.[98][99]

Boron fibers and sub-millimeter sized crystalline boron springs are produced by laser-assisted chemical vapor deposition. Translation of the focused laser beam allows production of even complex helical structures. Such structures show good mechanical properties (elastic modulus 450 GPa, fracture strain 3.7%, fracture stress 17 GPa) and can be applied as reinforcement of ceramics or in micromechanical systems.[100]

### Boron carbide ceramic

[edit]

Main article: Boron carbide

Boron carbide's ability to absorb neutrons without forming long-lived radionuclides (especially when doped with extra boron-10) makes the material attractive as an absorbent for neutron radiation arising in nuclear power plants.[101] Nuclear applications of boron carbide include shielding, control rods and shut-down pellets. Within control rods, boron carbide is often powdered, to increase its surface area.[102]

### High-hardness and abrasive compounds

[edit]

Main article: Superhard materials

Mechanical properties of BCN solids[103] and ReB2[104] Material  | Diamond  | cubic-BC2N  | cubic-BC5 | cubic-BN  | B4C  | ReB2

|
|
|
|
|
|

Vickers hardness (GPa)  | 115  | 76  | 71  | 62  | 38  | 22
Fracture toughness (MPa m1⁄2)  | 5.3  | 4.5  | 9.5  | 6.8  | 3.5  |

Boron carbide and cubic boron nitride powders are widely used as abrasives. Boron nitride is a material isoelectronic to carbon. Similar to carbon, it has both hexagonal (soft graphite-like h-BN) and cubic (hard, diamond-like c-BN) forms. h-BN is used as a high temperature component and lubricant. c-BN, also known under commercial name borazon, is a superior abrasive. Its hardness is only slightly smaller than, but its chemical stability is superior, to that of diamond.[105] Heterodiamond (also called BCN) is another diamond-like boron compound.[106]

### Metallurgy

[edit]

Main articles: Boron steel and Boriding

Boron is added to boron steels at the level of a few parts per million to increase hardenability. Higher percentages are added to steels used in the nuclear industry due to boron's neutron absorption ability.[citation needed]

Boron can also increase the surface hardness of steels and alloys through boriding. Additionally metal borides are used for coating tools through chemical vapor deposition or physical vapor deposition. Implantation of boron ions into metals and alloys, through ion implantation or ion beam deposition, results in a spectacular increase in surface resistance and microhardness. Laser alloying has also been successfully used for the same purpose. These borides are an alternative to diamond coated tools, and their (treated) surfaces have similar properties to those of the bulk boride.[107]

For example, rhenium diboride can be produced at ambient pressures, but is rather expensive because of rhenium. The hardness of ReB2 exhibits considerable anisotropy because of its hexagonal layered structure. Its value is comparable to that of tungsten carbide, silicon carbide, titanium diboride or zirconium diboride.[104] Similarly, AlMgB14 \+ TiB2 composites possess high hardness and wear resistance and are used in either bulk form or as coatings for components exposed to high temperatures and wear loads.[108]

### Detergent formulations and bleaching agents

[edit]

Borax is used in various household laundry and cleaning products.[109] It is also present in some tooth bleaching formulas.[90]

Sodium perborate serves as a source of active oxygen in many detergents, laundry detergents, cleaning products, and laundry bleaches. However, despite its name, "Borateem" laundry bleach no longer contains any boron compounds, using sodium percarbonate instead as a bleaching agent.[110]

### Insecticides and antifungals

[edit]

Zinc borates and boric acid, popularized as fire retardants, are widely used as wood preservatives and insecticides. Boric acid is also used as a domestic insecticide.[citation needed]

### Semiconductors

[edit]

Boron is a useful dopant for such semiconductors as silicon, germanium, and silicon carbide. Having one fewer valence electron than the host atom, it donates a hole resulting in p-type conductivity. Traditional method of introducing boron into semiconductors is via its atomic diffusion at high temperatures. This process uses either solid (B2O3), liquid (BBr3), or gaseous boron sources (B2H6 or BF3). However, after the 1970s, it was mostly replaced by ion implantation, which relies mostly on BF3 as a boron source.[111] Boron trichloride gas is also an important chemical in semiconductor industry, however, not for doping but rather for plasma etching of metals and their oxides.[112] Triethylborane is also injected into vapor deposition reactors as a boron source.[113] Examples are the plasma deposition of boron-containing hard carbon films, silicon nitride–boron nitride films, and for doping of diamond film with boron.[114]

### Magnets

[edit]

Boron is a component of neodymium magnets (Nd2Fe14B), which are among the strongest type of permanent magnet. These magnets are found in a variety of electromechanical and electronic devices, such as magnetic resonance imaging (MRI) medical imaging systems, in compact and relatively small motors and actuators. As examples, computer HDDs (hard disk drives), CD (compact disk) and DVD (digital versatile disk) players rely on neodymium magnet motors to deliver intense rotary power in a remarkably compact package. In mobile phones 'Neo' magnets provide the magnetic field which allows tiny speakers to deliver appreciable audio power.[115]

### Shielding and neutron absorber in nuclear reactors

[edit]

Boron shielding is used as a control for nuclear reactors, taking advantage of its high cross-section for neutron capture.[116]

In pressurized water reactors a variable concentration of boronic acid in the cooling water is used as a neutron poison to compensate the variable reactivity of the fuel. When new rods are inserted the concentration of boronic acid is maximal, and is reduced during the lifetime.[117]

### Other nonmedical uses

[edit]

Launch of Apollo 15 Saturn V rocket, using triethylborane ignitor

* Because of its distinctive green flame, amorphous boron is used in pyrotechnic flares.[118]
* Some anti-corrosion systems contain borax.[119]
* Sodium borates are used as a flux for soldering silver and gold and with ammonium chloride for welding ferrous metals.[120] They are also fire retarding additives to plastics and rubber articles.[121]
* Boric acid (also known as orthoboric acid) H3BO3 is used in the production of textile fiberglass and flat panel displays[90][122] and in many PVAc-[123] and PVOH-based[124] adhesives.
* Triethylborane is a substance which ignites the JP-7 fuel of the Pratt & Whitney J58 turbojet/ramjet engines powering the Lockheed SR-71 Blackbird.[125] It was also used to ignite the F-1 Engines on the Saturn V Rocket utilized by NASA's Apollo and Skylab programs from 1967 until 1973. Today SpaceX uses it to ignite the engines on their Falcon 9 rocket.[126] Triethylborane is suitable for this because of its pyrophoric properties, especially the fact that it burns with a very high temperature.[127] Triethylborane is an industrial initiator in radical reactions, where it is effective even at low temperatures.[128]
* Borates are used as environmentally benign wood preservatives.[129]

### Pharmaceutical and biological applications

[edit]

See also: Boron deficiency (plant disorder) and Boron deficiency (medicine)

Boron plays a role in pharmaceutical and biological applications as it is found in various antibiotics produced by bacteria, such as boromycins, aplasmomycins, borophycins, and tartrolons. These antibiotics have shown inhibitory effects on the growth of certain bacteria, fungi, and protozoa. Boron is also being studied for its potential medicinal applications, including its incorporation into biologically active molecules for therapies like boron neutron capture therapy for brain tumors. Some boron-containing biomolecules may act as signaling molecules interacting with cell surfaces, suggesting a role in cellular communication.[130]

Boric acid has antiseptic, antifungal, and antiviral properties and, for these reasons, is applied as a water clarifier in swimming pool water treatment.[131] Mild solutions of boric acid have been used as eye antiseptics.[citation needed]

Bortezomib (marketed as Velcade and Cytomib). Boron appears as an active element in the organic pharmaceutical bortezomib, a new class of drug called the proteasome inhibitor, for treating myeloma and one form of lymphoma (it is currently in experimental trials against other types of lymphoma). The boron atom in bortezomib binds the catalytic site of the 26S proteasome[132] with high affinity and specificity.

* A number of potential boronated pharmaceuticals using boron-10, have been prepared for use in boron neutron capture therapy (BNCT).[133]
* Some boron compounds show promise in treating arthritis, though none have as yet been generally approved for the purpose.[134]

Tavaborole (marketed as Kerydin) is an Aminoacyl tRNA synthetase inhibitor which is used to treat toenail fungus. It gained FDA approval in July 2014.[135]

Dioxaborolane chemistry enables radioactive fluoride (18F) labeling of antibodies or red blood cells, which allows for positron emission tomography (PET) imaging of cancer[136] and hemorrhages,[137] respectively. A Human-Derived, Genetic, Positron-emitting and Fluorescent (HD-GPF) reporter system uses a human protein, PSMA and non-immunogenic, and a small molecule that is positron-emitting (boron bound 18F) and fluorescence for dual modality PET and fluorescent imaging of genome modified cells, e.g. cancer, CRISPR/Cas9, or CAR T-cells, in an entire mouse.[138] The dual-modality small molecule targeting PSMA was tested in humans and found the location of primary and metastatic prostate cancer, fluorescence-guided removal of cancer, and detects single cancer cells in tissue margins.[139]

## Research

[edit]

### MgB2

[edit]

Magnesium diboride (MgB2) is a superconductor with the transition temperature of 39 K.[140][141] MgB2 wires are produced with the powder-in-tube process and applied in superconducting magnets.[142][143] A project at CERN to make MgB2 cables has resulted in superconducting test cables able to carry 20,000 amperes for extremely high current distribution applications, such as the contemplated high luminosity version of the Large Hadron Collider.[144]

### Commercial isotope enrichment

[edit]

Because of its high neutron cross-section, boron-10 is often used to control fission in nuclear reactors as a neutron-capturing substance.[145] Several industrial-scale enrichment processes have been developed; however, only the fractionated vacuum distillation of the dimethyl ether adduct of boron trifluoride (DME-BF3) and column chromatography of borates are being used.[146][147]

### Radiation-hardened semiconductors

[edit]

Cosmic radiation will produce secondary neutrons if it hits spacecraft structures. Those neutrons will be captured in 10B, if it is present in the spacecraft's semiconductors, producing a gamma ray, an alpha particle, and a lithium ion. Those resultant decay products may then irradiate nearby semiconductor "chip" structures, causing data loss (bit flipping, or single event upset). In radiation-hardened semiconductor designs, one countermeasure is to use depleted boron, which is greatly enriched in 11B and contains almost no 10B. This is useful because 11B is largely immune to radiation damage. Depleted boron is a byproduct of the nuclear industry (see above).[148]

### Proton-boron fusion

[edit]

Main article: Proton-boron fusion

11B is also a candidate as a fuel for aneutronic fusion. When struck by a proton with energy of about 500 keV, it produces three alpha particles and 8.7 MeV of energy. Most other fusion reactions involving hydrogen and helium produce penetrating neutron radiation, which weakens reactor structures and induces long-term radioactivity, thereby endangering operating personnel. The alpha particles from 11B fusion can be turned directly into electric power, and all radiation stops as soon as the reactor is turned off.[149]

### Enriched boron (boron-10)

[edit]

Neutron cross section of boron (top curve is for 10B and bottom curve for 11B)

The 10B isotope is useful for capturing thermal neutrons (see neutron cross section#Typical cross sections). The nuclear industry enriches natural boron to nearly pure 10B. The less-valuable by-product, depleted boron, is nearly pure 11B.[150]

Enriched boron or 10B is used in both radiation shielding and is the primary nuclide used in neutron capture therapy of cancer. In the latter ("boron neutron capture therapy" or BNCT), a compound containing 10B is incorporated into a pharmaceutical which is selectively taken up by a malignant tumor and tissues near it. The patient is then treated with a beam of low energy neutrons at a relatively low neutron radiation dose. The neutrons, however, trigger energetic and short-range secondary alpha particle and lithium-7 heavy ion radiation that are products of the boron-neutron nuclear reaction, and this ion radiation additionally bombards the tumor, especially from inside the tumor cells.[151][152][153][154]

In nuclear reactors, 10B is used for reactivity control and in emergency shutdown systems. It can serve either function in the form of borosilicate control rods or as boric acid. In pressurized water reactors, 10B boric acid is added to the reactor coolant after the plant is shut down for refueling. When the plant is started up again, the boric acid is slowly filtered out over many months as fissile material is used up and the fuel becomes less reactive.[148]

### Nuclear fusion

[edit]

Boron has been investigated for possible applications in nuclear fusion research. It is commonly used for conditioning the walls in fusion reactors by depositing boron coatings on plasma-facing components and walls to reduce the release of hydrogen and impurities from the surfaces.[155] It is also being used for the dissipation of energy in the fusion plasma boundary to suppress excessive energy bursts and heat fluxes to the walls.[156][157]

### Neutron capture therapy

[edit]

In neutron capture therapy (BNCT) for malignant brain tumors, boron is researched to be used for selectively targeting and destroying tumor cells. The goal is to deliver higher concentrations of the non-radioactive boron isotope (10B) to the tumor cells than to the surrounding normal tissues. When these 10B-containing cells are irradiated with low-energy thermal neutrons, they undergo nuclear capture reactions, releasing high linear energy transfer (LET) particles such as α-particles and lithium-7 nuclei within a limited path length. These high-LET particles can destroy the adjacent tumor cells without causing significant harm to nearby normal cells. Boron acts as a selective agent due to its ability to absorb thermal neutrons and produce short-range physical effects primarily affecting the targeted tissue region. This binary approach allows for precise tumor cell killing while sparing healthy tissues. The effective delivery of boron involves administering boron compounds or carriers capable of accumulating selectively in tumor cells compared to surrounding tissue. BSH and BPA have been used clinically, but research continues to identify more optimal carriers. Accelerator-based neutron sources have also been developed recently as an alternative to reactor-based sources, leading to improved efficiency and enhanced clinical outcomes in BNCT. By employing the properties of boron isotopes and targeted irradiation techniques, BNCT offers a potential approach to treating malignant brain tumors by selectively killing cancer cells while minimizing the damage caused by traditional radiation therapies.[158]

BNCT has shown promising results in clinical trials for various other malignancies, including glioblastoma, head and neck cancer, cutaneous melanoma, hepatocellular carcinoma, lung cancer, and extramammary Paget's disease. The treatment involves a nuclear reaction between nonradioactive boron-10 isotope and low-energy thermal or high-energy epithermal neutrons to generate α particles and lithium nuclei that selectively destroy DNA in tumor cells. The primary challenge lies in developing efficient boron agents with higher content and specific targeting properties tailored for BNCT. Integration of tumor-targeting strategies with BNCT could potentially establish it as a practical personalized treatment option for different types of cancers. Ongoing research explores new boron compounds, optimization strategies, theranostic agents, and radiobiological advances to overcome limitations and cost-effectively improve patient outcomes.[159][160][161]

## Biological role

[edit]

See also: Boron deficiency (plant disorder)

Boron is an essential plant nutrient, required primarily for maintaining the integrity of cell walls. However, high soil concentrations of greater than 1.0 ppm lead to marginal and tip necrosis in leaves as well as poor overall growth performance. Levels as low as 0.8 ppm produce these same symptoms in plants that are particularly sensitive to boron in the soil. Nearly all plants, even those somewhat tolerant of soil boron, will show at least some symptoms of boron toxicity when soil boron content is greater than 1.8 ppm. When this content exceeds 2.0 ppm, few plants will perform well and some may not survive.[162][163][164]

Some boron-containing antibiotics exist in nature.[165] The first one found was boromycin, isolated from streptomyces in the 1960s.[166][167] Others are tartrolons, a group of antibiotics discovered in the 1990s from culture broth of the myxobacterium Sorangium cellulosum.[168]

In 2013, chemist and synthetic biologist Steve Benner suggested that the conditions on Mars three billion years ago were much more favorable to the stability of RNA and formation of oxygen-containing[note 1] boron and molybdenum catalysts found in life. According to Benner's theory, primitive life, which is widely believed to have originated from RNA,[171][172] first formed on Mars before migrating to Earth.[173]

### In human health

[edit]

It is thought that boron plays several essential roles in animals, including humans, but the exact physiological role is poorly understood.[174][175] Boron deficiency has only been clearly established in livestock;[176][177] in humans, boron deficiency may affect bone mineral density, though it has been noted that additional research on the effects of bone health is necessary.[178]

Boron is not classified as an essential human nutrient because research has not established a clear biological function for it.[179][180] The U.S. Food and Nutrition Board (FNB) found the existing data insufficient to derive a Recommended Dietary Allowance (RDA), Adequate Intake (AI), or Estimated Average Requirement (EAR) for boron and the U.S. Food and Drug Administration (FDA) has not established a daily value for boron for food and dietary supplement labeling purposes.[179][180] While low boron status can be detrimental to health, probably increasing the risk of osteoporosis, poor immune function, and cognitive decline, high boron levels are associated with cell damage and toxicity.[181]

Still, studies suggest that boron may exert beneficial effects on reproduction and development, calcium metabolism, bone formation, brain function, insulin and energy substrate metabolism, immunity, and steroid hormone (including estrogen) and vitamin D function, among other functions.[182][180] A small human trial published in 1987 reported on postmenopausal women first made boron deficient and then repleted with 3 mg/day. Boron supplementation markedly reduced urinary calcium excretion and elevated the serum concentrations of 17 beta-estradiol and testosterone.[183] Environmental boron appears to be inversely correlated with arthritis.[184]

The exact mechanism by which boron exerts its physiological effects is not fully understood, but may involve interactions with adenosine monophosphate (ADP) and S-adenosyl methionine (SAM-e), two compounds involved in important cellular functions. Furthermore, boron appears to inhibit cyclic ADP-ribose, thereby affecting the release of calcium ions from the endoplasmic reticulum and affecting various biological processes.[181] Some studies suggest that boron may reduce levels of inflammatory biomarkers.[182] Congenital endothelial dystrophy type 2, a rare form of corneal dystrophy, is linked to mutations in SLC4A11 gene that encodes a transporter reportedly regulating the intracellular concentration of boron.[185]

In humans, boron is usually consumed with food that contains boron, such as fruits, leafy vegetables, and nuts.[179] Foods that are particularly rich in boron include avocados, dried fruits such as raisins, peanuts, pecans, prune juice, grape juice, wine and chocolate powder.[182][179] According to 2-day food records from the respondents to the Third National Health and Nutrition Examination Survey (NHANES III), adult dietary intake was recorded at 0.9 to 1.4 mg/day.[186]

### Health issues and toxicity

[edit]

Boron  Hazards

GHS labelling:[187]

Pictograms

Signal word

| Warning

Hazard statements

| H302, H412

Precautionary statements

| P264, P270, P273, P301+P312, P501
NFPA 704 (fire diamond)  |

[188]

Chemical compound

Elemental boron, boron oxide, boric acid, borates, and many organoboron compounds are relatively nontoxic to humans and animals (with toxicity similar to that of table salt). The LD50 (dose at which there is 50% mortality) for animals is about 6 g per kg of body weight. Substances with an LD50 above 2 g/kg are considered nontoxic. An intake of 4 g/day of boric acid was reported without incident, but more than this is considered toxic in more than a few doses. Intakes of more than 0.5 grams per day for 50 days cause minor digestive and other problems suggestive of toxicity.[189]

Boric acid is more toxic to insects than to mammals, and is routinely used as an insecticide.[190] However, it has been used in neutron capture therapy alongside other boron compounds such as sodium borocaptate and boronophenylalanine with reported low toxicity levels.[191]

The boranes (boron hydrogen compounds) and similar gaseous compounds are quite poisonous. As usual, boron is not an element that is intrinsically poisonous, but the toxicity of these compounds depends on structure (for another example of this phenomenon, see phosphine).[17][18] The boranes are also highly flammable and require special care when handling, some combinations of boranes and other compounds are highly explosive. Sodium borohydride presents a fire hazard owing to its reducing nature and the liberation of hydrogen on contact with acid. Boron halides are corrosive.[192]

Boron toxicity in rose leaves.

Boron is necessary for plant growth, but an excess of boron is toxic to plants, and occurs particularly in acidic soil.[193][194] It presents as a yellowing from the tip inwards of the oldest leaves and black spots in barley leaves, but it can be confused with other stresses such as magnesium deficiency in other plants.[195]

## See also

[edit]

* Allotropes of boron
* Boron deficiency
* Boron oxide
* Boron nitride
* Boron neutron capture therapy
* Boronic acid
* Hydroboration-oxidation reaction
* Suzuki coupling

## Notes

[edit]

1. ^ The earth's atmosphere and prehistoric oceans three billion years ago had much lower oxygen levels than Earth's modern climate.[169][170]

## References

[edit]

1. ^ Van Setten et al. 2007, pp. 2460–1
2. ^ "Standard Atomic Weights: Boron". CIAAW. 2009.
3. ^ Prohaska T, Irrgeher J, Benefield J, Böhlke JK, Chesson LA, Coplen TB, et al. (4 May 2022). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
4. ^ B(−5) has been observed in Al3BC, see Schroeder M. "Eigenschaften von borreichen Boriden und Scandium-Aluminium-Oxid-Carbiden" (in German). p. 139.
5. ^ B(−1) has been observed in magnesium diboride (MgB2), see Keeler J, Wothers P (2014). Chemical Structure and Reactivity: An Integrated Approach. Oxford University Press. ISBN 9780199604135.
6. ^ Braunschweig H, Dewhurst RD, Hammond K, Mies J, Radacki K, Vargas A (2012). "Ambient-Temperature Isolation of a Compound with a Boron-Boron Triple Bond". Science. 336 (6087): 1420–2\. Bibcode:2012Sci...336.1420B. doi:10.1126/science.1221138. PMID 22700924. S2CID 206540959.
7. ^ a b Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 28\. ISBN 978-0-08-037941-8.
8. ^ Zhang, K.Q., Guo, B., Braun, V., Dulick, M., Bernath, P.F. (1995). "Infrared Emission Spectroscopy of BF and AIF" (PDF). J. Molecular Spectroscopy. 170 (1): 82. Bibcode:1995JMoSp.170...82Z. doi:10.1006/jmsp.1995.1058.
9. ^ Holcombe Jr., C. E., Smith, D. D., Lorc, J. D., Duerlesen, W. K., Carpenter, D. A. (October 1973). "Physical-Chemical Properties of beta-Rhombohedral Boron". High Temp. Sci. 5 (5): 349–57.
10. ^ a b Haynes, William M., ed. (2016). CRC Handbook of Chemistry and Physics (97th ed.). CRC Press. p. 4.127. ISBN 9781498754293.
11. ^ a b c Gay Lussac, J.L., Thenard, L.J. (1808). "Sur la décomposition et la recomposition de l'acide boracique". Annales de chimie. 68: 169–174.
12. ^ a b c Davy H (1809). "An account of some new analytical researches on the nature of certain bodies, particularly the alkalies, phosphorus, sulphur, carbonaceous matter, and the acids hitherto undecomposed: with some general observations on chemical theory". Philosophical Transactions of the Royal Society of London. 99: 39–104\. doi:10.1098/rstl.1809.0005.
13. ^ "Q & A: Where does the element Boron come from?". physics.illinois.edu. Archived from the original on 29 May 2012. Retrieved 4 December 2011.
14. ^ "Boron". Britannica encyclopedia. Archived from the original on 4 August 2020. Retrieved 4 August 2020.
15. ^ Kirk-Othmer, ed. (26 January 2001). Kirk-Othmer Encyclopedia of Chemical Technology (1 ed.). Wiley. doi:10.1002/0471238961.0215181510011419.a01.pub2. ISBN 978-0-471-48494-3.
16. ^ a b Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 139\. ISBN 978-0-08-037941-8.
17. ^ a b Garrett, Donald E. (1998). Borates: handbook of deposits, processing, properties, and use. Academic Press. pp. 102, 385–386\. ISBN 978-0-12-276060-0.
18. ^ a b Calvert, J. B. "Boron". University of Denver. Archived from the original on 24 September 2018. Retrieved 5 May 2009.
19. ^ Hildebrand, G. H. (1982) "Borax Pioneer: Francis Marion Smith." San Diego: Howell-North Books. p. 267 ISBN 0-8310-7148-6
20. ^ Weeks ME (1933). "XII. Other Elements Isolated with the Aid of Potassium and Sodium: Beryllium, Boron, Silicon and Aluminum". The Discovery of the Elements. Easton, PA: Journal of Chemical Education. p. 156\. ISBN 978-0-7661-3872-8. Archived from the original on 20 September 2014. Retrieved 5 January 2016. `{{cite book}}`: ISBN / Date incompatibility (help)
21. ^ Berzelius produced boron by reducing a borofluoride salt; specifically, by heating potassium borofluoride with potassium metal. See: Berzelius, J. (1824) "Undersökning af flusspatssyran och dess märkvärdigaste föreningar" Archived 13 June 2016 at the Wayback Machine (Part 2) (Investigation of hydrofluoric acid and of its most noteworthy compounds), Kongliga Vetenskaps-Academiens Handlingar (Proceedings of the Royal Science Academy), vol. 12, pp. 46–98; see especially pp. 88ff. Reprinted in German as: Berzelius, J. J. (1824) "Untersuchungen über die Flußspathsäure und deren merkwürdigste Verbindungen" Archived 8 January 2017 at the Wayback Machine, Poggendorff's Annalen der Physik und Chemie, vol. 78, pages 113–150.
22. ^ Weintraub, Ezekiel (1910). "Preparation and properties of pure boron". Transactions of the American Electrochemical Society. 16: 165–184\. Archived from the original on 9 May 2016. Retrieved 5 January 2016.
23. ^ a b Laubengayer AW, Hurd DT, Newkirk AE, Hoard JL (1943). "Boron. I. Preparation and Properties of Pure Crystalline Boron". Journal of the American Chemical Society. 65 (10): 1924–1931\. Bibcode:1943JAChS..65.1924L. doi:10.1021/ja01250a036.
24. ^ Borchert, W., Dietz, W., Koelker, H. (1970). "Crystal Growth of Beta–Rhombohedrical Boron". Zeitschrift für Angewandte Physik. 29: 277. OSTI 4098583.
25. ^ Barth S (1997). "Boron isotopic analysis of natural fresh and saline waters by negative thermal ionization mass spectrometry". Chemical Geology. 143 (3–4): 255–261\. Bibcode:1997ChGeo.143..255B. doi:10.1016/S0009-2541(97)00107-1.3–4&rft.pages=255-261&rft.date=1997&rft_id=info:doi/10.1016/S0009-2541(97)00107-1&rft_id=info:bibcode/1997ChGeo.143..255B&rft.aulast=Barth&rft.aufirst=S.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
26. ^ Liu Z (2003). "Two-body and three-body halo nuclei". Science China Physics, Mechanics & Astronomy. 46 (4): 441. Bibcode:2003ScChG..46..441L. doi:10.1360/03yw0027 (inactive 3 May 2025). S2CID 121922481.`{{cite journal}}`: CS1 maint: DOI inactive as of May 2025 (link)
27. ^ "Boron NMR". BRUKER Biospin. Archived from the original on 2 May 2009. Retrieved 5 May 2009.
28. ^ "visualisisation of the crystal structure". Archived from the original on 4 November 2023. Retrieved 4 November 2023.
29. ^ "visualisisation of the crystal structure". Archived from the original on 4 November 2023. Retrieved 4 November 2023.
30. ^ "visualisisation of the crystal structure". Archived from the original on 4 November 2023. Retrieved 4 November 2023.
31. ^ "visualisisation of the crystal structure". Archived from the original on 4 November 2023. Retrieved 4 November 2023.
32. ^ a b c Oganov A.R., Chen J., Gatti C., Ma Y.-M., Yu T., Liu Z., et al. (2009). "Ionic high-pressure form of elemental boron" (PDF). Nature. 457 (7231): 863–867\. arXiv:0911.3192. Bibcode:2009Natur.457..863O. doi:10.1038/nature07736. PMID 19182772. S2CID 4412568. Archived (PDF) from the original on 28 July 2018. Retrieved 9 May 2009.
33. ^ van Setten M.J., Uijttewaal M.A., de Wijs G.A., de Groot R.A. (2007). "Thermodynamic stability of boron: The role of defects and zero point motion" (PDF). J. Am. Chem. Soc. 129 (9): 2458–2465\. Bibcode:2007JAChS.129.2458V. doi:10.1021/ja0631246. PMID 17295480. S2CID 961904. Archived from the original (PDF) on 15 April 2021. Retrieved 14 July 2019.
34. ^ Widom M., Mihalkovic M. (2008). "Symmetry-broken crystal structure of elemental boron at low temperature". Phys. Rev. B. 77 (6): 064113. arXiv:0712.0530. Bibcode:2008PhRvB..77f4113W. doi:10.1103/PhysRevB.77.064113. S2CID 27321818.
35. ^ Eremets, M. I., Struzhkin VV, Mao H, Hemley RJ (2001). "Superconductivity in Boron". Science. 293 (5528): 272–4\. Bibcode:2001Sci...293..272E. doi:10.1126/science.1062286. PMID 11452118. S2CID 23001035.
36. ^ Zarechnaya E. Y., et al. (2009). "Superhard semiconducting optically transparent high pressure phase of boron". Physical Review Letters. 102 (18): 185501–185501–4. Bibcode:2009PhRvL.102r5501Z. doi:10.1103/PhysRevLett.102.185501. PMID 19518885. structure determination
37. ^ Wentorf RH Jr (1 January 1965). "Boron: Another Form". Science. 147 (3653): 49–50\. Bibcode:1965Sci...147...49W. doi:10.1126/science.147.3653.49. PMID 17799779. S2CID 20539654.
38. ^ Hoard, J. L., Sullenger, D. B., Kennard, C. H. L., Hughes, R. E. (1970). "The structure analysis of β-rhombohedral boron". J. Solid State Chem. 1 (2): 268–277\. Bibcode:1970JSSCh...1..268H. doi:10.1016/0022-4596(70)90022-8.
39. ^ Will, G., Kiefer, B. (2001). "Electron Deformation Density in Rhombohedral a-Boron". Zeitschrift für Anorganische und Allgemeine Chemie. 627 (9): 2100. doi:10.1002/1521-3749(200109)627:9<2100::AID-ZAAC2100>3.0.CO;2-G.
40. ^ Talley, C. P., LaPlaca, S., Post, B. (1960). "A new polymorph of boron". Acta Crystallogr. 13 (3): 271–272\. Bibcode:1960AcCry..13..271T. doi:10.1107/S0365110X60000613.
41. ^ Solozhenko VL, Kurakevych OO, Oganov AR (2008). "On the hardness of a new boron phase, orthorhombic γ-B28". Journal of Superhard Materials. 30 (6): 428–429\. arXiv:1101.2959. Bibcode:2008JSMat..30..428S. doi:10.3103/S1063457608060117. S2CID 15066841.
42. ^ a b c Zarechnaya EY, Dubrovinsky L, Dubrovinskaia N, Filinchuk Y, Chernyshov D, Dmitriev V, et al. (2009). "Superhard Semiconducting Optically Transparent High Pressure Phase of Boron". Phys. Rev. Lett. 102 (18): 185501. Bibcode:2009PhRvL.102r5501Z. doi:10.1103/PhysRevLett.102.185501. PMID 19518885.
43. ^ Nelmes, R. J., Loveday JS, Allan DR, Hull S, Hamel G, Grima P, et al. (1993). "Neutron- and x-ray-diffraction measurements of the bulk modulus of boron". Phys. Rev. B. 47 (13): 7668–7673\. Bibcode:1993PhRvB..47.7668N. doi:10.1103/PhysRevB.47.7668. PMID 10004773.
44. ^ Madelung, O., ed. (1983). Landolt-Bornstein, New Series. Vol. 17e. Berlin: Springer-Verlag.
45. ^ Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 144\. ISBN 978-0-08-037941-8.
46. ^ Hobbs DZ, Campbell TT, Block FE (1964). Methods Used in Preparing Boron. U.S. Department of the Interior, Bureau of Mines. p. 14\. Archived from the original on 8 March 2024. Retrieved 25 February 2022.
47. ^ Springborg M (1 September 2011). Chemical Modelling: Applications and Theory Volume 8. Royal Society of Chemistry. pp. 2–3\. ISBN 978-1-84973-278-9.
48. ^ Berger, L. I. (1996). Semiconductor materials. CRC Press. pp. 37–43. ISBN 978-0-8493-8912-2.
49. ^ a b c d e Brotherton RJ, Weber CJ, Guibert CR, Little JL (2000). "Boron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a04_309. ISBN 978-3-527-30385-4.
50. ^ Chintersingh KL, Schoenitz M, Dreizin EL (November 2016). "Oxidation kinetics and combustion of boron particles with modified surface". Combustion and Flame. 173: 288–295\. Bibcode:2016CoFl..173..288C. doi:10.1016/j.combustflame.2016.08.027.
51. ^ a b c d e f Holleman AF, Wiberg E, Wiberg N (1985). "Bor". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 814–864\. ISBN 978-3-11-007511-3.
52. ^ Delaplane, R.G., Dahlborg U, Graneli B, Fischer P, Lundstrom T (1988). "A neutron diffraction study of amorphous boron". Journal of Non-Crystalline Solids. 104 (2–3): 249–252\. Bibcode:1988JNCS..104..249D. doi:10.1016/0022-3093(88)90395-X.2–3&rft.pages=249-252&rft.date=1988&rft_id=info:doi/10.1016/0022-3093(88)90395-X&rft_id=info:bibcode/1988JNCS..104..249D&rft.au=Delaplane,+R.G.&rft.au=Dahlborg,+U.&rft.au=Graneli,+B.&rft.au=Fischer,+P.&rft.au=Lundstrom,+T.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
53. ^ R.G. Delaplane, Dahlborg U, Howells W, Lundstrom T (1988). "A neutron diffraction study of amorphous boron using a pulsed source". Journal of Non-Crystalline Solids. 106 (1–3): 66–69\. Bibcode:1988JNCS..106...66D. doi:10.1016/0022-3093(88)90229-3.1–3&rft.pages=66-69&rft.date=1988&rft_id=info:doi/10.1016/0022-3093(88)90229-3&rft_id=info:bibcode/1988JNCS..106...66D&rft.au=R.G.+Delaplane&rft.au=Dahlborg,+U.&rft.au=Howells,+W.&rft.au=Lundstrom,+T.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
54. ^ Key JA (14 September 2014). "Violations of the Octet Rule". Introductory Chemistry. Archived from the original on 17 May 2019. Retrieved 14 August 2019.
55. ^ a b c Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
56. ^ Schubert DM (2015). "Boric Oxide, Boric Acid, and Borates". Ullmann's Encyclopedia of Industrial Chemistry. pp. 1–32\. doi:10.1002/14356007.a04_263.pub2. ISBN 978-3-527-30385-4.
57. ^ Schubert DM, Alam F, Visi MZ, Knobler CB (2003). "Structural Characterization and Chemistry of the Industrially Important Zinc Borate, Zn[B3O4(OH)3]". Chemistry of Materials. 15 (4): 866–871\. doi:10.1021/cm020791z.
58. ^ "Mindat.org - Mines, Minerals and More". mindat.org. Archived from the original on 22 April 2011. Retrieved 4 August 2019.
59. ^ Nobelprize.org. "The Nobel Prize in Chemistry 2010". Nobel Prize Foundation. Retrieved 25 October 2013.
60. ^ Welch AJ (2013). "The significance and impact of Wade's rules". Chem. Commun. 49 (35): 3615–3616\. doi:10.1039/C3CC00069A. PMID 23535980.
61. ^ Miller VR, Ryschkewitsch GE, Gaines DF, Keipe N (1974). "Pentaborane(9) (B 5 H 9 )". Inorganic Syntheses. Vol. 15\. pp. 118–122\. doi:10.1002/9780470132463.ch26. ISBN 978-0-470-13176-3.
62. ^ Smith MB, March J (2007), Advanced Organic Chemistry: Reactions, Mechanisms, and Structure (6th ed.), New York: Wiley-Interscience, p. 1075, ISBN 978-0-471-72091-1
63. ^ Kono H, Hooz J (1973). "Ketones and Alcohols from Organoboranes: Phenyl Heptyl Ketone, 1-Hexanol, and 1-Octanol". Organic Syntheses. 53: 77. doi:10.15227/orgsyn.053.0077.
64. ^ Herbert C. Brown (1975). Organic Syntheses via Boranes. New York: John Wiley and Sons. ISBN 0471112801.
65. ^ Greenwood NN, Earnshaw A (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 181\. ISBN 978-0-08-037941-8.
66. ^ Griswold W (October 1957). "Super-Potent 'Zip' Fuels Pack More WHOOSH". Popular Science. Bonnier Corporation. pp. 86–89.
67. ^ Michel M, Kar S, Endres L, Dewhurst RD, Engels B, Braunschweig H (4 March 2025). "The synthesis of a neutral boryne". Nature Synthesis: 1–8\. doi:10.1038/s44160-025-00763-1. ISSN 2731-0582.
68. ^ Engler, M. (2007). "Hexagonal Boron Nitride (hBN) – Applications from Metallurgy to Cosmetics" (PDF). Cfi/Ber. DKG. 84: D25. ISSN 0173-9913. Archived (PDF) from the original on 13 June 2013. Retrieved 8 January 2012.
69. ^ a b Greim, Jochen, Schwetz, Karl A. (2005). "Boron Carbide, Boron Nitride, and Metal Borides". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH: Weinheim. doi:10.1002/14356007.a04_295.pub2. ISBN 978-3527306732.
70. ^ Zhang F X, Xu F F, Mori T, Liu Q L, Sato A, Tanaka T (2001). "Crystal structure of new rare-earth boron-rich solids: REB28.5C4". J. Alloys Compd. 329 (1–2): 168–172\. doi:10.1016/S0925-8388(01)01581-X.1–2&rft.pages=168-172&rft.date=2001&rft_id=info:doi/10.1016/S0925-8388(01)01581-X&rft.au=Zhang+F+X&rft.au=Xu+F+F&rft.au=Mori+T&rft.au=Liu+Q+L&rft.au=Sato+A&rft.au=Tanaka+T&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
71. ^ Weimer, Alan W. (1997). Carbide, Nitride and Boride Materials Synthesis and Processing. Chapman & Hall (London, New York). p. 131\. ISBN 0-412-54060-6.
72. ^ Cardarelli, François (2008). "Titanium Diboride". Materials handbook: A concise desktop reference. Springer. pp. 638–639\. ISBN 978-1-84628-668-1. Archived from the original on 8 January 2017. Retrieved 5 January 2016.
73. ^ Vangioni-Flam E, Cassé M, Audouze J (2000). "Lithium–beryllium–boron: origin and evolution". Physics Reports. 333–334: 365–387\. arXiv:astro-ph/9907171. Bibcode:2000PhR...333..365V. doi:10.1016/S0370-1573(00)00030-2.
74. ^ Mokhov, A.V., Kartashov, P.M., Gornostaeva, T.A., Asadulin, A.A., Bogatikov, O.A., 2013: Complex nanospherulites of zinc oxide and native amorphous boron in the Lunar regolith from Mare Crisium. Doklady Earth Sciences 448(1) 61–63
75. ^ Mindat, http://www.mindat.org/min-43412.html Archived 6 March 2016 at the Wayback Machine
76. ^ Kistler RB (1994). "Boron and Borates" (PDF). Industrial Minerals and Rocks (6th ed.): 171–186\. Archived from the original (PDF) on 4 June 2016. Retrieved 20 September 2008.
77. ^ Zbayolu, G., Poslu, K. (1992). "Mining and Processing of Borates in Turkey". Mineral Processing and Extractive Metallurgy Review. 9 (1–4): 245–254\. Bibcode:1992MPEMR...9..245O. doi:10.1080/08827509208952709.1–4&rft.pages=245-254&rft.date=1992&rft_id=info:doi/10.1080/08827509208952709&rft_id=info:bibcode/1992MPEMR...9..245O&rft.au=Zbayolu,+G.&rft.au=Poslu,+K.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
78. ^ Kar Y, Şen N, Demİrbaş A (2006). "Boron Minerals in Turkey, Their Application Areas and Importance for the Country's Economy". Minerals & Energy – Raw Materials Report. 20 (3–4): 2–10\. Bibcode:2006MERMR..20....2K. doi:10.1080/14041040500504293.3–4&rft.pages=2-10&rft.date=2006&rft_id=info:doi/10.1080/14041040500504293&rft_id=info:bibcode/2006MERMR..20....2K&rft.aulast=Kar&rft.aufirst=Y.&rft.au=Şen,+Nejdet&rft.au=Demİrbaş,+Ayhan&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
79. ^ Global reserves chart Archived 31 October 2014 at the Wayback Machine. Retrieved 14 August 2014.
80. ^ Şebnem Önder, Ayşe Eda Biçer, Işıl Selen Denemeç (September 2013). "Are certain minerals still under state monopoly?" (PDF). Mining Turkey. Archived from the original (PDF) on 3 March 2016. Retrieved 21 December 2013.
81. ^ "Turkey as the global leader in boron export and production" (PDF). European Association of Service Providers for Persons with Disabilities Annual Conference 2013. Archived from the original (PDF) on 3 March 2016. Retrieved 18 December 2013.
82. ^ "U.S. Borax Boron Mine". The Center for Land Use Interpretation, Ludb.clui.org. Archived from the original on 11 February 2012. Retrieved 26 April 2013.
83. ^ "Boras". Rio Tinto. 10 April 2012. Archived from the original on 18 September 2012. Retrieved 26 April 2013.
84. ^ "Boron Properties". Los Alamos National Laboratory. Archived from the original on 26 September 2018. Retrieved 18 September 2008.
85. ^ "BORON" (PDF). USGS. Archived (PDF) from the original on 9 October 2022. Retrieved 27 July 2022.
86. ^ a b The Economics of Boron (11th ed.). Roskill Information Services, Ltd. 2006. ISBN 978-0-86214-516-3.
87. ^ "Raw and Manufactured Materials 2006 Overview". Archived from the original on 8 July 2011. Retrieved 5 May 2009.
88. ^ "Roskill reports: boron". Roskill. Archived from the original on 4 October 2003. Retrieved 5 May 2009.
89. ^ "Boron: Statistics and Information". USGS. Archived from the original on 16 September 2008. Retrieved 5 May 2009.
90. ^ a b c Hammond, C. R. (2004). The Elements, in Handbook of Chemistry and Physics (81st ed.). CRC press. ISBN 978-0-8493-0485-9.
91. ^ [1] Archived 6 October 2014 at the Wayback Machine Discussion of various types of boron addition to glass fibers in fiberglass. Retrieved 14 August 2014.
92. ^ Global end use of boron in 2011 Archived 22 April 2016 at the Wayback Machine. Retrieved 14 August 2014
93. ^ E. Fitzer, et al. (2000). "Fibers, 5. Synthetic Inorganic". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a11_001. ISBN 978-3527306732.
94. ^ "Boron Market Analysis". Chemanalyst. March 2024. Retrieved 3 September 2024.
95. ^ Pfaender HG (1996). Schott guide to glass (2nd ed.). Springer. p. 122. ISBN 978-0-412-62060-7.
96. ^ Herring HW (1966). "Selected Mechanical and Physical Properties of Boron Filaments" (PDF). NASA. Archived (PDF) from the original on 22 February 2014. Retrieved 20 September 2008.
97. ^ Layden GK (1973). "Fracture behaviour of boron filaments". Journal of Materials Science. 8 (11): 1581–1589\. Bibcode:1973JMatS...8.1581L. doi:10.1007/BF00754893. S2CID 136959123.
98. ^ Kostick DS (2006). "Mineral Yearbook: Boron" (PDF). United States Geological Survey. Archived (PDF) from the original on 20 September 2008. Retrieved 20 September 2008.
99. ^ Cooke TF (1991). "Inorganic Fibers—A Literature Review". Journal of the American Ceramic Society. 74 (12): 2959–2978\. doi:10.1111/j.1151-2916.1991.tb04289.x.
100. ^ Johansson S, Schweitz JÅ, Westberg H, Boman M (1992). "Microfabrication of three-dimensional boron structures by laser chemical processing". Journal of Applied Physics. 72 (12): 5956–5963\. Bibcode:1992JAP....72.5956J. doi:10.1063/1.351904.
101. ^ Fabrication and Evaluation of Urania-Alumina Fuel Elements and Boron Carbide Burnable Poison Elements Archived 27 July 2020 at the Wayback Machine, Wisnyi, L. G. and Taylor, K.M., in "ASTM Special Technical Publication No. 276: Materials in Nuclear Applications", Committee E-10 Staff, American Society for Testing Materials, 1959
102. ^ Weimer AW (1997). Carbide, Nitride and Boride Materials Synthesis and Processing. Chapman & Hall (London, New York). ISBN 978-0-412-54060-8.
103. ^ Solozhenko VL, Kurakevych OO, Le Godec Y, Mezouar M, Mezouar M (2009). "Ultimate Metastable Solubility of Boron in Diamond: Synthesis of Superhard Diamondlike BC5" (PDF). Phys. Rev. Lett. 102 (1): 015506. Bibcode:2009PhRvL.102a5506S. doi:10.1103/PhysRevLett.102.015506. PMID 19257210. Archived (PDF) from the original on 21 September 2017. Retrieved 23 October 2017.
104. ^ a b Qin J, He D, Wang J, Fang L, Lei L, Li Y, et al. (2008). "Is Rhenium Diboride a Superhard Material?". Advanced Materials. 20 (24): 4780–4783\. Bibcode:2008AdM....20.4780Q. doi:10.1002/adma.200801471. S2CID 98327405.
105. ^ Wentorf RH (1957). "Cubic form of boron nitride". J. Chem. Phys. 26 (4): 956. Bibcode:1957JChPh..26..956W. doi:10.1063/1.1745964.
106. ^ Komatsu, T., Samedima, M., Awano, T., Kakadate, Y., Fujiwara, S. (1999). "Creation of Superhard B–C–N Heterodiamond Using an Advanced Shock Wave Compression Technology". Journal of Materials Processing Technology. 85 (1–3): 69–73\. doi:10.1016/S0924-0136(98)00263-5.1–3&rft.pages=69-73&rft.date=1999&rft_id=info:doi/10.1016/S0924-0136(98)00263-5&rft.au=Komatsu,+T.&rft.au=Samedima,+M.&rft.au=Awano,+T.&rft.au=Kakadate,+Y.&rft.au=Fujiwara,+S.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
107. ^ Gogotsi, Y. G., Andrievski, R.A. (1999). Materials Science of Carbides, Nitrides and Borides. Springer. pp. 270. ISBN 978-0-7923-5707-0.
108. ^ Schmidt J, Boehling M, Burkhardt U, Grin Y (2007). "Preparation of titanium diboride TiB2 by spark plasma sintering at slow heating rate". Science and Technology of Advanced Materials. 8 (5): 376–382\. Bibcode:2007STAdM...8..376S. doi:10.1016/j.stam.2007.06.009.
109. ^ Sodium borate decahydrate (borax) in the Consumer Product Information Database
110. ^ Thompson R (1974). "Industrial applications of boron compounds". Pure and Applied Chemistry. 39 (4): 547. doi:10.1351/pac197439040547.
111. ^ May GS, Spanos CJ (2006). Fundamentals of semiconductor manufacturing and process control. John Wiley and Sons. pp. 51–54. ISBN 978-0-471-78406-7.
112. ^ Sherer JM (2005). Semiconductor industry: wafer fab exhaust management. CRC Press. pp. 39–60\. ISBN 978-1-57444-720-0.
113. ^ Jeong H, Kim DY, Kim J, Moon S, Han N, Lee SH, et al. (5 April 2019). "Wafer-scale and selective-area growth of high-quality hexagonal boron nitride on Ni(111) by metal-organic chemical vapor deposition". Scientific Reports. 9 (1): 5736. Bibcode:2019NatSR...9.5736J. doi:10.1038/s41598-019-42236-4. ISSN 2045-2322. PMC 6450880. PMID 30952939.
114. ^ Zschech, Ehrenfried, Whelan, Caroline, Mikolajick, Thomas (2005). Materials for information technology: devices, interconnects and packaging. Birkhäuser. p. 44\. ISBN 978-1-85233-941-8.
115. ^ Campbell P (1996). Permanent magnet materials and their application. Cambridge University Press. p. 45\. ISBN 978-0-521-56688-9.
116. ^ Martin, James E (2008). Physics for Radiation Protection: A Handbook. John Wiley & Sons. pp. 660–661\. ISBN 978-3-527-61880-4. Archived from the original on 3 June 2016. Retrieved 5 January 2016.
117. ^ Pastina B, Isabey J, Hickel B (1999). "The influence of water chemistry on the radiolysis of the primary coolant water in pressurized water reactors". Journal of Nuclear Materials. 264 (3): 309–318\. Bibcode:1999JNuM..264..309P. doi:10.1016/S0022-3115(98)00494-2. ISSN 0022-3115.
118. ^ Kosanke, B. J., et al. (2004). Pyrotechnic Chemistry. Journal of Pyrotechnics. p. 419\. ISBN 978-1-889526-15-7.
119. ^ "Borax Decahydrate". Archived from the original on 20 April 2009. Retrieved 5 May 2009.
120. ^ Davies, A. C. (1992). The Science and Practice of Welding: Welding science and technology. Cambridge University Press. p. 56\. ISBN 978-0-521-43565-9.
121. ^ Horrocks, A.R., Price, D. (2001). Fire Retardant Materials. Woodhead Publishing Ltd. p. 55. ISBN 978-1-85573-419-7.
122. ^ Ide, F. (2003). "Information technology and polymers. Flat panel display". Engineering Materials. 51: 84. Archived from the original on 13 March 2012. Retrieved 28 May 2009.
123. ^ Geng S, Shah FU, Liu P, Antzutkin ON, Oksman K (20 January 2017). "Plasticizing and crosslinking effects of borate additives on the structure and properties of poly(vinyl acetate)". RSC Advances. 7 (13): 7483–7491\. Bibcode:2017RSCAd...7.7483G. doi:10.1039/C6RA28574K. ISSN 2046-2069.
124. ^ Choe S, You S, Park K, Kim Y, Park J, Cho Y, et al. (15 July 2024). "Boric acid-crosslinked poly(vinyl alcohol): biodegradable, biocompatible, robust, and high-barrier paper coating". Green Chemistry. 26 (14): 8230–8241\. doi:10.1039/D4GC00618F. ISSN 1463-9270.
125. ^ "Lockheed SR-71 Blackbird". March Field Air Museum. Archived from the original on 4 March 2000. Retrieved 5 May 2009.
126. ^ Mission Status Center, June 2, 2010, 1905 GMT Archived 30 May 2010 at the Wayback Machine, SpaceflightNow, accessed 2010-06-02, Quotation: "The flanges will link the rocket with ground storage tanks containing liquid oxygen, kerosene fuel, helium, gaseous nitrogen and the first stage ignitor source called triethylaluminum-triethylborane, better known as TEA-TEB."
127. ^ Young, A. (2008). The Saturn V F-1 Engine: Powering Apollo into History. Springer. p. 86\. ISBN 978-0-387-09629-2.
128. ^ Brotherton RJ, Weber CJ, Guibert CR, Little JL (15 June 2000). "Boron Compounds". Ullmann's Encyclopedia of Industrial Chemistry (1 ed.). Wiley. doi:10.1002/14356007.a04_309. ISBN 978-3-527-30385-4.
129. ^ Carr JM, Duggan PJ, Humphrey DG, Platts JA, Tyndall EM (2010). "Wood Protection Properties of Quaternary Ammonium Arylspiroborate Esters Derived from Naphthalene 2,3-Diol, 2,2'-Biphenol and 3-Hydroxy-2-naphthoic Acid". Australian Journal of Chemistry. 63 (10): 1423. doi:10.1071/CH10132.
130. ^ Rezanka T, Sigler K (February 2008). "Biologically active compounds of semi-metals". Phytochemistry. 69 (3): 585–606\. Bibcode:2008PChem..69..585R. doi:10.1016/j.phytochem.2007.09.018. PMID 17991498.
131. ^ "Boric acid". chemicalland21.com. Archived from the original on 3 June 2009. Retrieved 28 May 2009.
132. ^ Bonvini P, Zorzi E, Basso G, Rosolen A (2007). "Bortezomib-mediated 26S proteasome inhibition causes cell-cycle arrest and induces apoptosis in CD-30+ anaplastic large cell lymphoma". Leukemia. 21 (4): 838–42\. doi:10.1038/sj.leu.2404528. PMID 17268529. S2CID 23570446.
133. ^ "Overview of neutron capture therapy pharmaceuticals". Pharmainfo.net. 22 August 2006. Archived from the original on 23 July 2011. Retrieved 26 April 2013.
134. ^ Travers RL, Rennie G, Newnham R (1990). "Boron and Arthritis: The Results of a Double-blind Pilot Study". Journal of Nutritional Medicine. 1 (2): 127–132\. doi:10.3109/13590849009003147.
135. ^ Thompson C (8 July 2014). "FDA Approves Boron-based Drug to Treat Toenail Fungal Infections". ashp. Archived from the original on 8 December 2015. Retrieved 7 October 2015.
136. ^ Rodriguez EA, Wang Y, Crisp JL, Vera DR, Tsien RY, Ting R (27 April 2016). "New Dioxaborolane Chemistry Enables [18F]-Positron-Emitting, Fluorescent [18F]-Multimodality Biomolecule Generation from the Solid Phase". Bioconjugate Chemistry. 27 (5): 1390–1399\. doi:10.1021/acs.bioconjchem.6b00164. PMC 4916912. PMID 27064381.
137. ^ Wang Y, An FF, Chan M, Friedman B, Rodriguez EA, Tsien RY, et al. (5 January 2017). "18F-positron-emitting/fluorescent labeled erythrocytes allow imaging of internal hemorrhage in a murine intracranial hemorrhage model". Journal of Cerebral Blood Flow & Metabolism. 37 (3): 776–786\. doi:10.1177/0271678x16682510. PMC 5363488. PMID 28054494.
138. ^ Guo H, Harikrishna K, Vedvyas Y, McCloskey JE, Zhang W, Chen N, et al. (23 May 2019). "A fluorescent, [ 18 F]-positron-emitting agent for imaging PMSA allows genetic reporting in adoptively-transferred, genetically-modified cells". ACS Chemical Biology. 14 (7): 1449–1459\. doi:10.1021/acschembio.9b00160. ISSN 1554-8929. PMC 6775626. PMID 31120734.
139. ^ Aras O, Demirdag C, Kommidi H, Guo H, Pavlova I, Aygun A, et al. (March 2021). "Small Molecule, Multimodal [18F]-PET and Fluorescence Imaging Agent Targeting Prostate Specific Membrane Antigen: First-in-Human Study". Clinical Genitourinary Cancer. 19 (5): 405–416\. doi:10.1016/j.clgc.2021.03.011. PMC 8449790. PMID 33879400.
140. ^ Jones, Morton E., Marsh, Richard E. (1954). "The Preparation and Structure of Magnesium Boride, MgB2". Journal of the American Chemical Society. 76 (5): 1434–1436\. Bibcode:1954JAChS..76.1434J. doi:10.1021/ja01634a089.
141. ^ Canfield PC, Crabtree GW (2003). "Magnesium Diboride: Better Late than Never" (PDF). Physics Today. 56 (3): 34–40\. Bibcode:2003PhT....56c..34C. doi:10.1063/1.1570770. Archived (PDF) from the original on 26 February 2012. Retrieved 8 January 2012.
142. ^ Canfield PC, Crabtree GW (2003). "Magnesium Diboride: Better Late than Never" (PDF). Physics Today. 56 (3): 34–41\. Bibcode:2003PhT....56c..34C. doi:10.1063/1.1570770. Archived from the original (PDF) on 17 December 2008. Retrieved 22 September 2008.
143. ^ Braccini V, Nardelli D, Penco R, Grasso G (2007). "Development of ex situ processed MgB2 wires and their applications to magnets". Physica C: Superconductivity. 456 (1–2): 209–217\. Bibcode:2007PhyC..456..209B. doi:10.1016/j.physc.2007.01.030.1–2&rft.pages=209-217&rft.date=2007&rft_id=info:doi/10.1016/j.physc.2007.01.030&rft_id=info:bibcode/2007PhyC..456..209B&rft.aulast=Braccini&rft.aufirst=Valeria&rft.au=Nardelli,+D.&rft.au=Penco,+R.&rft.au=Grasso,+G.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
144. ^ "Category "News+Articles" not found - CERN Document Server". cds.cern.ch. Archived from the original on 20 February 2022. Retrieved 9 October 2020.
145. ^ Steinbrück, Martin (2004). "Results of the B4C Control Rod Test QUENCH-07" (PDF). Forschungszentrum Karlsruhe in der Helmholtz-Gemeinschaft. Archived from the original (PDF) on 19 July 2011.
146. ^ "Commissioning of Boron Enrichment Plant". Indira Gandhi Centre for Atomic Research. Archived from the original on 8 December 2008. Retrieved 21 September 2008.
147. ^ Aida M, Fujii Y, Okamoto M (1986). "Chromatographic Enrichment of 10B by Using Weak-Base Anion-Exchange Resin". Separation Science and Technology. 21 (6): 643–654\. doi:10.1080/01496398608056140. showing an enrichment from 18% to above 94%.
148. ^ a b Duderstadt JJ, Hamilton LJ (1976). Nuclear Reactor Analysis. Wiley-Interscience. p. 245. ISBN 978-0-471-22363-4.
149. ^ Nevins WM (1998). "A Review of Confinement Requirements for Advanced Fuels". Journal of Fusion Energy. 17 (1): 25–32\. Bibcode:1998JFuE...17...25N. doi:10.1023/A:1022513215080. S2CID 118229833.
150. ^ Hawthorne MF (July 1993). "The Role of Chemistry in the Development of Boron Neutron Capture Therapy of Cancer". Angewandte Chemie International Edition in English. 32 (7): 950–984\. doi:10.1002/anie.199309501. ISSN 0570-0833.
151. ^ Barth RF (2003). "A Critical Assessment of Boron Neutron Capture Therapy: An Overview". Journal of Neuro-Oncology. 62 (1): 1–5\. doi:10.1023/A:1023262817500. PMID 12749698. S2CID 31441665.
152. ^ Coderre JA, Morris GM (1999). "The Radiation Biology of Boron Neutron Capture Therapy". Radiation Research. 151 (1): 1–18\. Bibcode:1999RadR..151....1C. doi:10.2307/3579742. JSTOR 3579742. PMID 9973079.
153. ^ Barth RF, S, F (1990). "Boron Neutron Capture Therapy of Cancer". Cancer Research. 50 (4): 1061–1070\. PMID 2404588.
154. ^ "Boron Neutron Capture Therapy – An Overview". Pharmainfo.net. 22 August 2006. Archived from the original on 23 July 2011. Retrieved 7 November 2011.
155. ^ Winter J (1996). "Wall conditioning in fusion devices and its influence on plasma performance" (PDF). Plasma Physics and Controlled Fusion. 38 (9): 1503–1542\. doi:10.1088/0741-3335/38/9/001. S2CID 250792253. Archived (PDF) from the original on 8 February 2024. Retrieved 2 February 2024.
156. ^ Gilson EP, Lee H (2021). "Wall conditioning and ELM mitigation with boron nitride powder injection in KSTAR". Nuclear Materials and Energy. 28: 101043. Bibcode:2021NMEne..2801043G. doi:10.1016/j.nme.2021.101043. OSTI 1822213.
157. ^ Effenberg F, Bortolon A (2022). "Mitigation of plasma–wall interactions with low-Z powders in DIII-D high confinement plasmas". Nuclear Fusion. 62 (10): 106015. arXiv:2203.15204. Bibcode:2022NucFu..62j6015E. doi:10.1088/1741-4326/ac899d. S2CID 247778852. Archived from the original on 20 August 2022. Retrieved 30 April 2023.
158. ^ Miyatake SI, Wanibuchi M, Hu N, Ono K (August 2020). "Boron neutron capture therapy for malignant brain tumors". J Neurooncol. 149 (1): 1–11\. doi:10.1007/s11060-020-03586-6. hdl:2433/226821. PMID 32676954. S2CID 220577322.
159. ^ Luo T, Huang W, Chu F, Zhu T, Feng B, Huang S, et al. (October 2023). "The Dawn of a New Era: Tumor-Targeting Boron Agents for Neutron Capture Therapy". Mol Pharm. 20 (10): 4942–4970\. doi:10.1021/acs.molpharmaceut.3c00701. PMID 37728998. S2CID 262086894.
160. ^ Coghi P, Li J, Hosmane NS, Zhu Y (September 2023). "Next generation of boron neutron capture therapy (BNCT) agents for cancer treatment". Med Res Rev. 43 (5): 1809–1830\. doi:10.1002/med.21964. PMID 37102375. S2CID 258355021.
161. ^ Takahara K, Miyatake SI, Azuma H, Shiroki R (July 2022). "Boron neutron capture therapy for urological cancers". Int J Urol. 29 (7): 610–616\. doi:10.1111/iju.14855. PMID 35240726. S2CID 247229359.
162. ^ Mahler RL. "Essential Plant Micronutrients. Boron in Idaho" (PDF). University of Idaho. Archived from the original (PDF) on 1 October 2009. Retrieved 5 May 2009.
163. ^ "Functions of Boron in Plant Nutrition" (PDF). U.S. Borax Inc. Archived from the original (PDF) on 20 March 2009.
164. ^ Blevins DG, Lukaszewski KM (1998). "Functions of Boron in Plant Nutrition". Annual Review of Plant Physiology and Plant Molecular Biology. 49: 481–500\. doi:10.1146/annurev.arplant.49.1.481. PMID 15012243.
165. ^ Irschik H, Schummer D, Gerth K, Höfle G, Reichenbach H (1995). "The tartrolons, new boron-containing antibiotics from a myxobacterium, Sorangium cellulosum". The Journal of Antibiotics. 48 (1): 26–30\. doi:10.7164/antibiotics.48.26. PMID 7532644. Archived from the original on 10 May 2020. Retrieved 28 August 2019.
166. ^ Hütter R, Keller-Schien W, Knüsel F, Prelog V, Rodgers Jr GC, Suter P, et al. (1967). "Stoffwechselprodukte von Mikroorganismen. 57. Mitteilung. Boromycin". Helvetica Chimica Acta. 50 (6): 1533–1539\. doi:10.1002/hlca.19670500612. PMID 6081908.
167. ^ Dunitz JD, Hawley DM, Miklos D, White DN, Berlin Y, Marusić R, et al. (1971). "Structure of boromycin". Helvetica Chimica Acta. 54 (6): 1709–1713\. doi:10.1002/hlca.19710540624. PMID 5131791.
168. ^ Schummer D, Irschik H, Reichenbach H, Höfle G (11 March 1994). "Antibiotics from gliding bacteria, LVII. Tartrolons: New boron-containing macrodiolides fromSorangium cellulosum". Liebigs Annalen der Chemie (in German). 1994 (3): 283–289\. doi:10.1002/jlac.199419940310. Archived from the original on 8 March 2024. Retrieved 19 October 2023.
169. ^ Lyons TW, Reinhard CT, Planavsky NJ (February 2014). "The rise of oxygen in Earth's early ocean and atmosphere". Nature. 506 (7488): 307–315\. Bibcode:2014Natur.506..307L. doi:10.1038/nature13068. PMID 24553238. S2CID 4443958.
170. ^ Catling DC, Zahnle KJ (February 2020). "The Archean atmosphere". Science Advances. 6 (9): eaax1420. Bibcode:2020SciA....6.1420C. doi:10.1126/sciadv.aax1420. PMC 7043912. PMID 32133393.
171. ^ Neveu M, Kim HJ, Benner SA (April 2013). "The "strong" RNA world hypothesis: fifty years old". Astrobiology. 13 (4): 391–403\. Bibcode:2013AsBio..13..391N. doi:10.1089/ast.2012.0868. PMID 23551238. "[The RNA world's existence] has broad support within the community today."
172. ^ Copley SD, Smith E, Morowitz HJ (December 2007). "The origin of the RNA world: co-evolution of genes and metabolism". Bioorganic Chemistry. 35 (6): 430–443\. doi:10.1016/j.bioorg.2007.08.001. PMID 17897696.
173. ^ "Primordial broth of life was a dry Martian cup-a-soup". New Scientist. 29 August 2013. Archived from the original on 24 April 2015. Retrieved 29 August 2013.
174. ^ "Boron". PDRhealth. Archived from the original on 11 October 2007. Retrieved 18 September 2008.
175. ^ Nielsen FH (1998). "Ultratrace elements in nutrition: Current knowledge and speculation". The Journal of Trace Elements in Experimental Medicine. 11 (2–3): 251–274\. doi:10.1002/(SICI)1520-670X(1998)11:2/3<251::AID-JTRA15>3.0.CO;2-Q.2–3&rft.pages=251-274&rft.date=1998&rft_id=info:doi/10.1002/(SICI)1520-670X(1998)11:2/3<251::AID-JTRA15>3.0.CO;2-Q&rft.aulast=Nielsen&rft.aufirst=Forrest+H.&rfr_id=info:sid/en.wikipedia.org:Boron" class="Z3988">
176. ^ Abdelnour SA, Abd El-Hack ME, Swelum AA, Perillo A, Losacco C (December 2018). "The vital roles of boron in animal health and production: A comprehensive review". Journal of Trace Elements in Medicine and Biology. 50: 296–304\. Bibcode:2018JTEMB..50..296A. doi:10.1016/j.jtemb.2018.07.018. ISSN 0946-672X. PMID 30262295.
177. ^ Sobiech P, Żarczyńska K, Milewska W, Kabu M, Uyarlar CU (1 April 2015). "The role of boron in animal health". Journal of Elementology. 20 (2). doi:10.5601/jelem.2014.19.3.706. ISSN 1644-2296.
178. ^ "Boron". Office of Dietary Supplements. 9 June 2022. Retrieved 3 September 2024.
179. ^ a b c d Nielsen FH, Eckhert CD (March 2020). "Boron". Adv Nutr. 11 (2): 461–462\. doi:10.1093/advances/nmz110. PMC 7442337. PMID 31639188.
180. ^ a b c "Office of Dietary Supplements - Boron". ods.od.nih.gov. Archived from the original on 21 October 2023. Retrieved 19 October 2023.
181. ^ a b Khaliq H, Juming Z, Ke-Mei P (November 2018). "The Physiological Role of Boron on Health". Biol Trace Elem Res. 186 (1): 31–51\. Bibcode:2018BTER..186...31K. doi:10.1007/s12011-018-1284-3. PMID 29546541. S2CID 255445828.
182. ^ a b c Pizzorno L (August 2015). "Nothing Boring About Boron". Integr Med (Encinitas). 14 (4): 35–48\. PMC 4712861. PMID 26770156.
183. ^ Nielsen FH, Hunt CD, Mullen LM, Hunt JR (1987). "Effect of dietary boron on mineral, estrogen, and testosterone metabolism in postmenopausal women". FASEB J. 1 (5): 394–7\. doi:10.1096/fasebj.1.5.3678698. PMID 3678698. S2CID 93497977.
184. ^ Jansen LH, et al., "Boron, Elemental", Kirk-Othmer Encyclopedia of Chemical Technology, New York: John Wiley, pp. 4–5, doi:10.1002/0471238961.0215181510011419.a01.pub3, ISBN 9780471238966
185. ^ Vithana, En, Morgan, P, Sundaresan, P, Ebenezer, Nd, Tan, Dt, Mohamed, Md, et al. (July 2006). "Mutations in sodium-borate cotransporter SLC4A11 cause recessive congenital hereditary endothelial dystrophy (CHED2)". Nature Genetics. 38 (7): 755–7\. doi:10.1038/ng1824. ISSN 1061-4036. PMID 16767101. S2CID 11112294.
186. ^ Boron. IN: Dietary Reference Intakes for Vitamin A, Vitamin K, Arsenic, Boron, Chromium, Copper, Iodine, Iron, Manganese, Molybdenum, Nickel, Silicon, Vanadium, and Copper Archived 22 September 2017 at the Wayback Machine. National Academy Press. 2001, pp. 510–521.
187. ^ "Boron 266620". Sigma-Aldrich. 3 October 2021. Archived from the original on 20 February 2022. Retrieved 21 December 2021.
188. ^ "MSDS - 266620". sigmaaldrich.com. Archived from the original on 2 February 2021. Retrieved 20 February 2022.
189. ^ Nielsen FH (1997). "Boron in human and animal nutrition". Plant and Soil. 193 (2): 199–208\. Bibcode:1997PlSoi.193..199N. doi:10.1023/A:1004276311956. S2CID 12163109. Archived from the original on 12 March 2020. Retrieved 29 April 2018.
190. ^ Klotz JH, Moss JI, Zhao R, Davis Jr LR, Patterson RS (1994). "Oral toxicity of boric acid and other boron compounds to immature cat fleas (Siphonaptera: Pulicidae)". J. Econ. Entomol. 87 (6): 1534–1536\. doi:10.1093/jee/87.6.1534. PMID 7836612.
191. ^ Hughes AM, Hu N (August 2023). "Optimizing Boron Neutron Capture Therapy (BNCT) to Treat Cancer: An Updated Review on the Latest Developments on Boron Compounds and Strategies". Cancers. 15 (16): 4091. doi:10.3390/cancers15164091. PMC 10452654. PMID 37627119.
192. ^ "Environmental Health Criteria 204: Boron". the IPCS. 1998. Archived from the original on 3 April 2019. Retrieved 5 May 2009.
193. ^ Zekri M, Obreza T. "Boron (B) and Chlorine (Cl) for Citrus Trees" (PDF). IFAS Extension. University of Florida. Archived (PDF) from the original on 9 September 2016. Retrieved 30 June 2017.
194. ^ K. I. Peverill, L. A. Sparrow, Douglas J. Reuter (1999). Soil Analysis: An Interpretation Manual. Csiro Publishing. pp. 309–311\. ISBN 978-0-643-06376-1. Archived from the original on 12 March 2020. Retrieved 30 June 2017.
195. ^ M. P. Reynolds (2001). Application of Physiology in Wheat Breeding. CIMMYT. p. 225\. ISBN 978-970-648-077-4. Archived from the original on 10 March 2020. Retrieved 30 June 2017.

## External links

[edit]

* Boron at The Periodic Table of Videos (University of Nottingham)
* J. B. Calvert: Boron, 2004, private website (archived version)

* v
* t
* e

Periodic table

|  | 1 | 2 |  | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

1 | H |  | He
2 | Li | Be |  | B | C | N | O | F | Ne
3 | Na | Mg |  | Al | Si | P | S | Cl | Ar
4 | K | Ca |  | Sc | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn | Ga | Ge | As | Se | Br | Kr
5 | Rb | Sr |  | Y | Zr | Nb | Mo | Tc | Ru | Rh | Pd | Ag | Cd | In | Sn | Sb | Te | I | Xe
6 | Cs | Ba | La | Ce | Pr | Nd | Pm | Sm | Eu | Gd | Tb | Dy | Ho | Er | Tm | Yb | Lu | Hf | Ta | W | Re | Os | Ir | Pt | Au | Hg | Tl | Pb | Bi | Po | At | Rn
7 | Fr | Ra | Ac | Th | Pa | U | Np | Pu | Am | Cm | Bk | Cf | Es | Fm | Md | No | Lr | Rf | Db | Sg | Bh | Hs | Mt | Ds | Rg | Cn | Nh | Fl | Mc | Lv | Ts | Og

| s-block | f-block | d-block | p-block

|
|
|

* v
* t
* e

Boron compounds

Boron pnictogenides|

* BAs
* BN
* BP

Boron halides|

* BBr3
* BCl3
* BF
* BFO
* BF3
* BI3
* B2F4
* B2Cl4

Acids|

* B(NO3)3
* B(OH)3
* BPO4
* B2(OH)4
* BH3O

Boranes|

* BH3
* B2H4
* B2H6
* BH3NH3
* B4H10
* B5H9
* B5H11
* B6H10
* B6H12
* B10H14
* B18H22

Boron oxides and sulfides|

* BO
* B2O3
* B2S3
* B6O

Carbides|

* B4C

Organoboron compounds|

* (BH2Me)2
* BMe3
* BEt3
* Ac4(BO3)2
* COBH3

Portal:

* Chemistry

Boron at Wikipedia's sister projects:

* Definitions from Wiktionary
* Media from Commons
* Resources from Wikiversity

Authority control databases: National |

* Germany
* United States
* France
* BnF data
* Japan
* Czech Republic
* Latvia
* Israel

|

*[P]: Pressure
*[T]: Temperature
*[v]: View this template
*[e]: Edit this template
*[H302]: H302: Harmful if swallowed
*[H412]: H412: Harmful to aquatic life with long lasting effects
*[P264]: P264: Wash ... thoroughly after handling.
*[P270]: P270: Do not eat, drink or smoke when using this product.
*[P273]: P273: Avoid release to the environment.
*[P301+P312]: P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
*[P501]: P501: Dispose of contents/container to ...
*[t]: Discuss this template