Comparison of orthotics

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)

The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted.
Find sources: "Comparison of orthotics" – news · newspapers · books · scholar · JSTOR (March 2018) (Learn how and when to remove this message)

|

This article contains promotional content. Please help improve it by removing promotional language and inappropriate external links, and by adding encyclopedic text written from a neutral point of view. (March 2018) (Learn how and when to remove this message)

|

The neutrality of this article is disputed. Relevant discussion may be found on the talk page. Please do not remove this message until conditions to do so are met. (March 2018) (Learn how and when to remove this message)

|

This article's lead section contains information that is not included elsewhere in the article. If the information is appropriate for the lead of the article, this information should also be included in the body of the article. (September 2022) (Learn how and when to remove this message)

|

(Learn how and when to remove this message)

Podiatrists mold custom orthotics to address patients' foot malformations. There are multiple means developed to create the basis for the molds, including plaster casts, foam box impressions, and three-dimensional computer imaging. The molds are used to create custom inserts that tend to be firm, flexible, and relatively soft.

## History

[edit]

Over the years podiatrists have developed numerous means to create the basis for their molds, plaster casts, foam box impressions, or three-dimensional computer imaging. None is very accurate: all produce proper fit under 80% of the time.[1][2]

Traditionally, they were created from plaster casts made from the patient's foot. These casts were made by wrapping dipped plaster or fiberglass strips around the foot to capture the form, then letting it dry and harden. Once the cast was hardened, the doctor would carefully remove it from the patient's foot and ship the cast, along with a prescription, to an orthotics lab which would use the negative of the cast to create an orthopedic insert. Research studies demonstrate that inter-practitioner variability is a major factor in orthotic intervention in treating a single patient and for a specific pathology[3]

Recently, several companies have developed digital foot scanners that use specialized software to scan a patient's foot and create a "virtual" cast. These scans are made by having the patient place the foot onto a specialized flat image scanner that uses light and software to capture and create a 3D model. This 3D model is then electronically submitted (along with a prescription) to an orthotics lab, where it is used to program a CNC machine that will ultimately produce the orthopedic insert.

## Styles

[edit]

Manufacturers of these products choose various materials.

* Firm supports stay in one exact position.
* Flexible supports maintain the arch positions while moving with the foot through the stride.
* Soft supports might use materials like foam rubber of varying intensity, memory foam, EVA, carbon fiber, silicone gel or filled leather. Because they are soft, their contour is less relevant. Instead, these tend to flatten, serving as shock absorbers. These give the proprioception of support, causing muscles to trigger in response, without true articulated support of the firmer models. Many shoe manufacturers, including athletic shoes, include similar pads with their shoes. Some products might be rubber pads shaped for a specific problem spot. Some of those could include a wrapping apparatus to hold them in place. Currently, there is a paucity of research providing recommendations on the type of orthotic or material used in its construction for different patient requirements.[4]

The firm or flexible models might require a period of adjustment. Depending on the severity of the arch collapse and the body's previous conditioning in response to that collapse, sudden readjustment can seem painful. Many attribute the feeling to walking on a walnut. It is recommended new users build up to wearing firm arch supports, starting with only a couple of hours the first day and adding an hour each successive day until the foot is adjusted to full-time usage. To mitigate this adjustment period, many manufacturers sell covering pads or have different gradations to build up to solid support. Some manufacturers cover their products in leather, which somewhat moderates the intensity of the correction while also adding to the stylistic look.

## References

[edit]

1. ^ Ashish Singh (2021-11-19). "Orthotics and Support Braces". Yesmyhealth.com. Retrieved 2021-08-21.
2. ^ Telfer S.; Gibson KS; Hennessy K; Steultjens MP; Woodburn J. (2012). "Computer-aided design of customized foot orthoses: reproducibility and effect of method used to obtain foot shape". Arch Phys Med Rehabil. 93 (5): 863–70\. doi:10.1016/j.apmr.2011.12.019. PMID 22541310.863-70&rft.date=2012&rft_id=info:doi/10.1016/j.apmr.2011.12.019&rft_id=info:pmid/22541310&rft.au=Telfer+S.&rft.au=Gibson+KS&rft.au=Hennessy+K&rft.au=Steultjens+MP&rft.au=Woodburn+J.&rfr_id=info:sid/en.wikipedia.org:Comparison+of+orthotics" class="Z3988">
3. ^ Chevalier, Thierry L.; Chockalingam, Nachiappan (2012). "Effects of foot orthoses: How important is the practitioner?". Gait & Posture. 35 (3): 383–388\. doi:10.1016/j.gaitpost.2011.10.356. PMID 22104292.383-388&rft.date=2012&rft_id=info:doi/10.1016/j.gaitpost.2011.10.356&rft_id=info:pmid/22104292&rft.aulast=Chevalier&rft.aufirst=Thierry+L.&rft.au=Chockalingam,+Nachiappan&rft_id=https://doi.org/10.1016/j.gaitpost.2011.10.356&rfr_id=info:sid/en.wikipedia.org:Comparison+of+orthotics" class="Z3988">
4. ^ Healy, A., Dunning, D. N. and Chockalingam, N. (2012) ‘Effect of insole material on lower limb kinematics and plantar pressures during treadmill walking’, Prosthetics and Orthotics International, 36(1), pp. 53–62. doi: 10.1177/0309364611429986.

Superfeet Insoles