Frost line (polymers)

This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Frost line" polymers – news · newspapers · books · scholar · JSTOR (December 2009) (Learn how and when to remove this message)

|

The frost line is a term used in plastic film manufacturing by extrusion. It refers to the point beyond the die where the temperature of the molten plastic falls below the softening point and the diameter of the extruded plastic bubble stabilizes. The term was borrowed from the notion of "frost line" in soil science and refers to the frosted appearance of the plastic film above the "frost line".

The distance from the die is called the height of the frost line. It depends on various factors, including the melt temperature, the speed of cooling, the extrusion speed, and the diameter of the bubble. The notion is important, since the higher the frost line, the more difficult to control the uniformity of the film thickness.

For example, a higher frost line due to higher melt temperature and/or lower cooling rate means a longer time to solidify, and a more smooth and transparent film is produced.