Iron

This article is about the metallic element. For other uses, see Iron (disambiguation).

Chemical element with atomic number 26 (Fe)

Iron, 26Fe

Iron
Pronunciation| /ˈaɪərn/ ⓘ
Allotropes| see Allotropes of iron
Appearance| lustrous metallic with a grayish tinge
Standard atomic weight Ar°(Fe)

* 55.845±0.002[1]
* 55.845±0.002 (abridged)[2]

Iron in the periodic table
|  |

| Hydrogen |  | Helium

|
|

Lithium | Beryllium |  | Boron | Carbon | Nitrogen | Oxygen | Fluorine | Neon
Sodium | Magnesium |  | Aluminium | Silicon | Phosphorus | Sulfur | Chlorine | Argon
Potassium | Calcium |  | Scandium | Titanium | Vanadium | Chromium | Manganese | Iron | Cobalt | Nickel | Copper | Zinc | Gallium | Germanium | Arsenic | Selenium | Bromine | Krypton
Rubidium | Strontium |  |  | Yttrium | Zirconium | Niobium | Molybdenum | Technetium | Ruthenium | Rhodium | Palladium | Silver | Cadmium | Indium | Tin | Antimony | Tellurium | Iodine | Xenon
Caesium | Barium | Lanthanum | Cerium | Praseodymium | Neodymium | Promethium | Samarium | Europium | Gadolinium | Terbium | Dysprosium | Holmium | Erbium | Thulium | Ytterbium | Lutetium | Hafnium | Tantalum | Tungsten | Rhenium | Osmium | Iridium | Platinum | Gold | Mercury (element) | Thallium | Lead | Bismuth | Polonium | Astatine | Radon
Francium | Radium | Actinium | Thorium | Protactinium | Uranium | Neptunium | Plutonium | Americium | Curium | Berkelium | Californium | Einsteinium | Fermium | Mendelevium | Nobelium | Lawrencium | Rutherfordium | Dubnium | Seaborgium | Bohrium | Hassium | Meitnerium | Darmstadtium | Roentgenium | Copernicium | Nihonium | Flerovium | Moscovium | Livermorium | Tennessine | Oganesson

manganese ← iron → cobalt
Atomic number (Z)| 26
Group| group 8
Period| period 4
Block|   d-block
Electron configuration| [Ar] 3d6 4s2
Electrons per shell| 2, 8, 14, 2
Physical properties
Phase at STP| solid
Melting point| 1811 K ​(1538 °C, ​2800 °F)
Boiling point| 3134 K ​(2861 °C, ​5182 °F)
Density (at 20° C)| 7.874 g/cm3 [3]
when liquid (at m.p.)| 6.98 g/cm3
Heat of fusion| 13.81 kJ/mol
Heat of vaporization| 340 kJ/mol
Molar heat capacity| 25.10 J/(mol·K)
Vapor pressure

| P (Pa) | 1  | 10  | 100  | 1 k  | 10 k  | 100 k

|
|
|
|
|
|

at T (K) | 1728  | 1890  | 2091  | 2346  | 2679  | 3132

Atomic properties
Oxidation states| common: +2, +3
−2,[4] −1,[4] 0,[4] +1,[5] +4,[4] +5,[6] +6,[4] +7[7]
Electronegativity| Pauling scale: 1.83
Ionization energies|

* 1st: 762.5 kJ/mol
* 2nd: 1561.9 kJ/mol
* 3rd: 2957 kJ/mol
* (more)

Atomic radius| empirical: 126 pm
Covalent radius| Low spin: 132±3 pm
High spin: 152±6 pm
Van der Waals radius| 194 [1] pm
Spectral lines of iron
Other properties
Natural occurrence| primordial
Crystal structure| α-Fe: ​body-centered cubic (bcc) (cI2)
Lattice constant|

a = 286.65 pm (at 20 °C)[3]
Crystal structure| γ-Fe (912–1394 °C): ​face-centered cubic (fcc) (cF4)
Lattice constant|

a = 364.68 pm (at 916 °C)[8]
Thermal expansion| 12.07×10−6/K (at 20 °C)[3]
Thermal conductivity| 80.4 W/(m⋅K)
Electrical resistivity| 96.1 nΩ⋅m (at 20 °C)
Curie point| 1043 K
Magnetic ordering| ferromagnetic
Young's modulus| 211 GPa
Shear modulus| 82 GPa
Bulk modulus| 170 GPa
Speed of sound thin rod| 5120 m/s (at r.t.) (electrolytic)
Poisson ratio| 0.29
Mohs hardness| 4
Vickers hardness| 608 MPa
Brinell hardness| 200–1180 MPa
CAS Number| 7439-89-6
History
Naming| probably from a PIE root meaning 'blood', for the color of its oxides
Discovery| before 5000 BC
Symbol| "Fe": from Latin ferrum
Isotopes of iron

* v
* e

| Main isotopes[9] | Decay

|

| abun­dance | half-life (t1/2) | mode | pro­duct
54Fe  | 5.85%  | stable
55Fe | synth | 2.73 y | ε | 55Mn
56Fe | 91.8%  | stable
57Fe  | 2.12%  | stable
58Fe  | 0.28%  | stable
59Fe  | synth  | 44.6 d | β− | 59Co
60Fe  | trace | 2.6×106 y | β− | 60Co
Category: Iron

* view
* talk
* edit

| references

Iron is a chemical element; it has symbol Fe (from Latin ferrum 'iron') and atomic number 26\. It is a metal that belongs to the first transition series and group 8 of the periodic table. It is, by mass, the most common element on Earth, forming much of Earth's outer and inner core. It is the fourth most abundant element in the Earth's crust, being mainly deposited by meteorites in its metallic state.

Extracting usable metal from iron ores requires kilns or furnaces capable of reaching 1,500 °C (2,730 °F), about 500 °C (900 °F) higher than that required to smelt copper. Humans started to master that process in Eurasia during the 2nd millennium BC and the use of iron tools and weapons began to displace copper alloys – in some regions, only around 1200 BC. That event is considered the transition from the Bronze Age to the Iron Age. In the modern world, iron alloys, such as steel, stainless steel, cast iron and special steels, are by far the most common industrial metals, due to their mechanical properties and low cost. The iron and steel industry is thus very important economically, and iron is the cheapest metal, with a price of a few dollars per kilogram or pound.

Pristine and smooth pure iron surfaces are a mirror-like silvery-gray. Iron reacts readily with oxygen and water to produce brown-to-black hydrated iron oxides, commonly known as rust. Unlike the oxides of some other metals that form passivating layers, rust occupies more volume than the metal and thus flakes off, exposing more fresh surfaces for corrosion. Chemically, the most common oxidation states of iron are iron(II) and iron(III). Iron shares many properties of other transition metals, including the other group 8 elements, ruthenium and osmium. Iron forms compounds in a wide range of oxidation states, −4 to +7. Iron also forms many coordination complexes; some of them, such as ferrocene, ferrioxalate, and Prussian blue have substantial industrial, medical, or research applications.

The body of an adult human contains about 4 grams (0.005% body weight) of iron, mostly in hemoglobin and myoglobin. These two proteins play essential roles in oxygen transport by blood and oxygen storage in muscles. To maintain the necessary levels, human iron metabolism requires a minimum of iron in the diet. Iron is also the metal at the active site of many important redox enzymes dealing with cellular respiration and oxidation and reduction in plants and animals.[10]

## Characteristics

[edit]

### Allotropes

[edit]

Main article: Allotropes of iron

Molar volume vs. pressure for α iron at room temperature

At least four allotropes of iron (differing atom arrangements in the solid) are known, conventionally denoted α, γ, δ, and ε.

The first three forms are observed at ordinary pressures. As molten iron cools past its freezing point of 1538 °C, it crystallizes into its δ allotrope, which has a body-centered cubic (bcc) crystal structure. As it cools further to 1394 °C, it changes to its γ-iron allotrope, a face-centered cubic (fcc) crystal structure, or austenite. At 912 °C and below, the crystal structure again becomes the bcc α-iron allotrope.[11]

The physical properties of iron at very high pressures and temperatures have also been studied extensively,[12][13] because of their relevance to theories about the cores of the Earth and other planets. Above approximately 10 GPa and temperatures of a few hundred kelvin or less, α-iron changes into another hexagonal close-packed (hcp) structure, which is also known as ε-iron. The higher-temperature γ-phase also changes into ε-iron,[13] but does so at higher pressure.

Some controversial experimental evidence exists for a stable β phase at pressures above 50 GPa and temperatures of at least 1500 K. It is supposed to have an orthorhombic or a double hcp structure.[14] (Confusingly, the term "β-iron" is sometimes also used to refer to α-iron above its Curie point, when it changes from being ferromagnetic to paramagnetic, even though its crystal structure has not changed.[11])

The Earth's inner core is generally presumed to consist of an iron-nickel alloy with ε (or β) structure.[15]

### Melting and boiling points

[edit]

Low-pressure phase diagram of pure iron

The melting and boiling points of iron, along with its enthalpy of atomization, are lower than those of the earlier 3d elements from scandium to chromium, showing the lessened contribution of the 3d electrons to metallic bonding as they are attracted more and more into the inert core by the nucleus;[16] however, they are higher than the values for the previous element manganese because that element has a half-filled 3d sub-shell and consequently its d-electrons are not easily delocalized. This same trend appears for ruthenium but not osmium.[17]

The melting point of iron is experimentally well defined for pressures less than 50 GPa. For greater pressures, published data (as of 2007) still varies by tens of gigapascals and over a thousand kelvin.[18]

### Magnetic properties

[edit]

Magnetization curves of 9 ferromagnetic materials, showing saturation. 1. Sheet steel, 2. Silicon steel, 3. Cast steel, 4. Tungsten steel, 5. Magnet steel, 6. Cast iron, 7. Nickel, 8. Cobalt, 9. Magnetite[19]

Below its Curie point of 770 °C (1,420 °F; 1,040 K), α-iron changes from paramagnetic to ferromagnetic: the spins of the two unpaired electrons in each atom generally align with the spins of its neighbors, creating an overall magnetic field.[20] This happens because the orbitals of those two electrons (dz2 and dx2 − y2) do not point toward neighboring atoms in the lattice, and therefore are not involved in metallic bonding.[11]

In the absence of an external source of magnetic field, the atoms get spontaneously partitioned into magnetic domains, about 10 micrometers across,[21] such that the atoms in each domain have parallel spins, but some domains have other orientations. Thus a macroscopic piece of iron will have a nearly zero overall magnetic field.

Application of an external magnetic field causes the domains that are magnetized in the same general direction to grow at the expense of adjacent ones that point in other directions, reinforcing the external field. This effect is exploited in devices that need to channel magnetic fields to fulfill design function, such as electrical transformers, magnetic recording heads, and electric motors. Impurities, lattice defects, or grain and particle boundaries can "pin" the domains in the new positions, so that the effect persists even after the external field is removed – thus turning the iron object into a (permanent) magnet.[20]

Similar behavior is exhibited by some iron compounds, such as the ferrites including the mineral magnetite, a crystalline form of the mixed iron(II,III) oxide Fe3O4 (although the atomic-scale mechanism, ferrimagnetism, is somewhat different). Pieces of magnetite with natural permanent magnetization (lodestones) provided the earliest compasses for navigation. Particles of magnetite were extensively used in magnetic recording media such as core memories, magnetic tapes, floppies, and disks, until they were replaced by cobalt-based materials.

### Isotopes

[edit]

Main article: Isotopes of iron

Iron has four stable isotopes: 54Fe (5.845% of natural iron), 56Fe (91.754%), 57Fe (2.119%) and 58Fe (0.282%). Twenty-four artificial isotopes have also been created. Of these stable isotopes, only 57Fe has a nuclear spin (−1⁄2). The nuclide 54Fe theoretically can undergo double electron capture to 54Cr, but the process has never been observed and only a lower limit on the half-life of 4.4×1020 years has been established.[22]

60Fe is an extinct radionuclide of long half-life (2.6 million years).[23] It is not found on Earth, but its ultimate decay product is its granddaughter, the stable nuclide 60Ni.[9] Much of the past work on isotopic composition of iron has focused on the nucleosynthesis of 60Fe through studies of meteorites and ore formation. In the last decade, advances in mass spectrometry have allowed the detection and quantification of minute, naturally occurring variations in the ratios of the stable isotopes of iron. Much of this work is driven by the Earth and planetary science communities, although applications to biological and industrial systems are emerging.[24]

In phases of the meteorites Semarkona and Chervony Kut, a correlation between the concentration of 60Ni, the granddaughter of 60Fe, and the abundance of the stable iron isotopes provided evidence for the existence of 60Fe at the time of formation of the Solar System. Possibly the energy released by the decay of 60Fe, along with that released by 26Al, contributed to the remelting and differentiation of asteroids after their formation 4.6 billion years ago. The abundance of 60Ni present in extraterrestrial material may bring further insight into the origin and early history of the Solar System.[25]

The most abundant iron isotope 56Fe is of particular interest to nuclear scientists because it represents the most common endpoint of nucleosynthesis.[26] Since 56Ni (14 alpha particles) is easily produced from lighter nuclei in the alpha process in nuclear reactions in supernovae (see silicon burning process), it is the endpoint of fusion chains inside extremely massive stars. Although adding more alpha particles is possible, but nonetheless the sequence does effectively end at 56Ni because conditions in stellar interiors cause the competition between photodisintegration and the alpha process to favor photodisintegration around 56Ni.[27][28] This 56Ni, which has a half-life of about 6 days, is created in quantity in these stars, but soon decays by two successive positron emissions within supernova decay products in the supernova remnant gas cloud, first to radioactive 56Co, and then to stable 56Fe. As such, iron is the most abundant element in the core of red giants, and is the most abundant metal in iron meteorites and in the dense metal cores of planets such as Earth.[29] It is also very common in the universe, relative to other stable metals of approximately the same atomic weight.[29][30] Iron is the sixth most abundant element in the universe, and the most common refractory element.[31]

Photon mass attenuation coefficient for iron

Although a further tiny energy gain could be extracted by synthesizing 62Ni, which has a marginally higher binding energy than 56Fe, conditions in stars are unsuitable for this process. Element production in supernovas greatly favor iron over nickel, and in any case, 56Fe still has a lower mass per nucleon than 62Ni due to its higher fraction of lighter protons.[32] Hence, elements heavier than iron require a supernova for their formation, involving rapid neutron capture by starting 56Fe nuclei.[29]

In the far future of the universe, assuming that proton decay does not occur, cold fusion occurring via quantum tunnelling would cause the light nuclei in ordinary matter to fuse into 56Fe nuclei. Fission and alpha-particle emission would then make heavy nuclei decay into iron, converting all stellar-mass objects to cold spheres of pure iron.[33]

## Origin and occurrence in nature

[edit]

### Cosmogenesis

[edit]

Iron's abundance in rocky planets like Earth is due to its abundant production during the runaway fusion and explosion of type Ia supernovae, which scatters the iron into space.[34][35]

### Metallic iron

[edit]

A polished and chemically etched piece of an iron meteorite, believed to be similar in composition to the Earth's metallic core, showing individual crystals of the iron-nickel alloy (Widmanstatten pattern)

Metallic or native iron is rarely found on the surface of the Earth because it tends to oxidize. However, both the Earth's inner and outer core, which together account for 35% of the mass of the whole Earth, are believed to consist largely of an iron alloy, possibly with nickel. Electric currents in the liquid outer core are believed to be the origin of the Earth's magnetic field. The other terrestrial planets (Mercury, Venus, and Mars) as well as the Moon are believed to have a metallic core consisting mostly of iron. The M-type asteroids are also believed to be partly or mostly made of metallic iron alloy.

The rare iron meteorites are the main form of natural metallic iron on the Earth's surface. Items made of cold-worked meteoritic iron have been found in various archaeological sites dating from a time when iron smelting had not yet been developed; and the Inuit in Greenland have been reported to use iron from the Cape York meteorite for tools and hunting weapons.[36] About 1 in 20 meteorites consist of the unique iron-nickel minerals taenite (35–80% iron) and kamacite (90–95% iron).[37] Native iron is also rarely found in basalts that have formed from magmas that have come into contact with carbon-rich sedimentary rocks, which have reduced the oxygen fugacity sufficiently for iron to crystallize. This is known as telluric iron and is described from a few localities, such as Disko Island in West Greenland, Yakutia in Russia and Bühl in Germany.[38]

### Mantle minerals

[edit]

Ferropericlase (Mg,Fe)O, a solid solution of periclase (MgO) and wüstite (FeO), makes up about 20% of the volume of the lower mantle of the Earth, which makes it the second most abundant mineral phase in that region after silicate perovskite (Mg,Fe)SiO3; it also is the major host for iron in the lower mantle.[39] At the bottom of the transition zone of the mantle, the reaction γ-(Mg,Fe)2[SiO4] ↔ (Mg,Fe)[SiO3] + (Mg,Fe)O transforms γ-olivine into a mixture of silicate perovskite and ferropericlase and vice versa. In the literature, this mineral phase of the lower mantle is also often called magnesiowüstite.[40] Silicate perovskite may form up to 93% of the lower mantle,[41] and the magnesium iron form, (Mg,Fe)SiO3, is considered to be the most abundant mineral in the Earth, making up 38% of its volume.[42]

### Earth's crust

[edit]

Ochre path in Roussillon

While iron is the most abundant element on Earth, most of this iron is concentrated in the inner and outer cores.[43][44] The fraction of iron that is in Earth's crust only amounts to about 5% of the overall mass of the crust and is thus only the fourth most abundant element in that layer (after oxygen, silicon, and aluminium).[45]

Most of the iron in the crust is combined with various other elements to form many iron minerals. An important class is the iron oxide minerals such as hematite (Fe2O3), magnetite (Fe3O4), and siderite (FeCO3), which are the major ores of iron. Many igneous rocks also contain the sulfide minerals pyrrhotite and pentlandite.[46][47] During weathering, iron tends to leach from sulfide deposits as the sulfate and from silicate deposits as the bicarbonate. Both of these are oxidized in aqueous solution and precipitate in even mildly elevated pH as iron(III) oxide.[48]

Banded iron formation in McKinley Park, Minnesota

Large deposits of iron are banded iron formations, a type of rock consisting of repeated thin layers of iron oxides alternating with bands of iron-poor shale and chert. The banded iron formations were laid down in the time between 3,700 million years ago and 1,800 million years ago.[49][50]

Materials containing finely ground iron(III) oxides or oxide-hydroxides, such as ochre, have been used as yellow, red, and brown pigments since pre-historical times. They contribute as well to the color of various rocks and clays, including entire geological formations like the Painted Hills in Oregon and the Buntsandstein ("colored sandstone", British Bunter).[51] Through Eisensandstein (a jurassic 'iron sandstone', e.g. from Donzdorf in Germany)[52] and Bath stone in the UK, iron compounds are responsible for the yellowish color of many historical buildings and sculptures.[53] The proverbial red color of the surface of Mars is derived from an iron oxide-rich regolith.[54]

Significant amounts of iron occur in the iron sulfide mineral pyrite (FeS2), but it is difficult to extract iron from it and it is therefore not exploited.[55] In fact, iron is so common that production generally focuses only on ores with very high quantities of it.[56]

According to the International Resource Panel's Metal Stocks in Society report, the global stock of iron in use in society is 2,200 kg per capita. More-developed countries differ in this respect from less-developed countries (7,000–14,000 vs 2,000 kg per capita).[57]

### Oceans

[edit]

Ocean science demonstrated the role of the iron in the ancient seas in both marine biota and climate.[58]

## Chemistry and compounds

[edit]

Main article: Iron compounds

Oxidation
state | Representative compound

|

−2 (d10) | Disodium tetracarbonylferrate (Collman's reagent)
−1 (d9) | Fe
2(CO)2−

0 (d8) | Iron pentacarbonyl
1 (d7) | Cyclopentadienyliron dicarbonyl dimer ("Fp2")
2 (d6) | Ferrous sulfate, Ferrocene
3 (d5) | Ferric chloride, Ferrocenium tetrafluoroborate
4 (d4) | Fe(diars)
2Cl2+
2, FeO(BF4)2
5 (d3) | FeO3−

6 (d2) | Potassium ferrate
7 (d1)  | [FeO4]– (matrix isolation, 4K)

Iron shows the characteristic chemical properties of the transition metals, namely the ability to form variable oxidation states differing by steps of one and a very large coordination and organometallic chemistry: indeed, it was the discovery of an iron compound, ferrocene, that revolutionalized the latter field in the 1950s.[59] Iron is sometimes considered as a prototype for the entire block of transition metals, due to its abundance and the immense role it has played in the technological progress of humanity.[60] Its 26 electrons are arranged in the configuration [Ar]3d64s2, of which the 3d and 4s electrons are relatively close in energy, and thus a number of electrons can be ionized.[17]

Iron forms compounds mainly in the oxidation states +2 (iron(II), "ferrous") and +3 (iron(III), "ferric"). Iron also occurs in higher oxidation states, e.g., the purple potassium ferrate (K2FeO4), which contains iron in its +6 oxidation state. The anion [FeO4]– with iron in its +7 oxidation state, along with an iron(V)-peroxo isomer, has been detected by infrared spectroscopy at 4 K after cocondensation of laser-ablated Fe atoms with a mixture of O2/Ar.[61] Iron(IV) is a common intermediate in many biochemical oxidation reactions.[62][63] Numerous organoiron compounds contain formal oxidation states of +1, 0, −1, or even −2. The oxidation states and other bonding properties are often assessed using the technique of Mössbauer spectroscopy.[64] Many mixed valence compounds contain both iron(II) and iron(III) centers, such as magnetite and Prussian blue (Fe4(Fe[CN]6)3).[63] The latter is used as the traditional "blue" in blueprints.[65]

Iron is the first of the transition metals that cannot reach its group oxidation state of +8, although its heavier congeners ruthenium and osmium can, with ruthenium having more difficulty than osmium.[11] Ruthenium exhibits an aqueous cationic chemistry in its low oxidation states similar to that of iron, but osmium does not, favoring high oxidation states in which it forms anionic complexes.[11] In the second half of the 3d transition series, vertical similarities down the groups compete with the horizontal similarities of iron with its neighbors cobalt and nickel in the periodic table, which are also ferromagnetic at room temperature and share similar chemistry. As such, iron, cobalt, and nickel are sometimes grouped together as the iron triad.[60]

Unlike many other metals, iron does not form amalgams with mercury. As a result, mercury is traded in standardized 76 pound flasks (34 kg) made of iron.[66]

Iron is by far the most reactive element in its group; it is pyrophoric when finely divided and dissolves easily in dilute acids, giving Fe2+. However, it does not react with concentrated nitric acid and other oxidizing acids due to the formation of an impervious oxide layer, which can nevertheless react with hydrochloric acid.[11] High-purity iron, called electrolytic iron, is considered to be resistant to rust, due to its oxide layer.

### Binary compounds

[edit]

#### Oxides and sulfides

[edit]

Ferrous or iron(II) oxide, FeO

Ferric or iron(III) oxide Fe2O3

Ferrosoferric or iron(II,III) oxide Fe3O4

Iron forms various oxide and hydroxide compounds; the most common are iron(II,III) oxide (Fe3O4), and iron(III) oxide (Fe2O3). Iron(II) oxide also exists, though it is unstable at room temperature. Despite their names, they are actually all non-stoichiometric compounds whose compositions may vary.[67] These oxides are the principal ores for the production of iron (see bloomery and blast furnace). They are also used in the production of ferrites, useful magnetic storage media in computers, and pigments. The best known sulfide is iron pyrite (FeS2), also known as fool's gold owing to its golden luster.[63] It is not an iron(IV) compound, but is actually an iron(II) polysulfide containing Fe2+ and S2−
2 ions in a distorted sodium chloride structure.[67]

Pourbaix diagram of iron

#### Halides

[edit]

Hydrated iron(III) chloride (ferric chloride)

The binary ferrous and ferric halides are well-known. The ferrous halides typically arise from treating iron metal with the corresponding hydrohalic acid to give the corresponding hydrated salts.[63]

Fe + 2 HX → FeX2 \+ H2 (X = F, Cl, Br, I)

Iron reacts with fluorine, chlorine, and bromine to give the corresponding ferric halides, ferric chloride being the most common.[68]

2 Fe + 3 X2 → 2 FeX3 (X = F, Cl, Br)

Ferric iodide is an exception, being thermodynamically unstable due to the oxidizing power of Fe3+ and the high reducing power of I−:[68]

2 I− \+ 2 Fe3+ → I2 \+ 2 Fe2+ (E0 = +0.23 V)

Ferric iodide, a black solid, is not stable in ordinary conditions, but can be prepared through the reaction of iron pentacarbonyl with iodine and carbon monoxide in the presence of hexane and light at the temperature of −20 °C, with oxygen and water excluded.[68] Complexes of ferric iodide with some soft bases are known to be stable compounds.[69][70]

### Solution chemistry

[edit]

Comparison of colors of solutions of ferrate (left) and permanganate (right)

The standard reduction potentials in acidic aqueous solution for some common iron ions are given below:[11]

[Fe(H2O)6]2+ \+ 2 e− | ⇌ Fe | E0 = −0.447 V

|
|

[Fe(H2O)6]3+ \+ e− | ⇌ [Fe(H2O)6]2+ | E0 = +0.77 V
FeO2−
4 \+ 8 H3O+ \+ 3 e− | ⇌ [Fe(H2O)6]3+ \+ 6 H2O | E0 = +2.20 V

The red-purple tetrahedral ferrate(VI) anion is such a strong oxidizing agent that it oxidizes ammonia to nitrogen (N2) and water to oxygen:[68]

4 FeO2−
4 \+ 34 H
2O → 4 [Fe(H2O)6]3+ \+ 20 OH−
\+ 3 O2

The pale-violet hexaquo complex [Fe(H2O)6]3+ is an acid such that above pH 0 it is fully hydrolyzed:[71]

[Fe(H2O)6]3+ | ⇌ [Fe(H2O)5(OH)]2+ \+ H+ | K = 10−3.05 mol dm−3

|
|

[Fe(H2O)5(OH)]2+ | ⇌ [Fe(H2O)4(OH)2]+ \+ H+ | K = 10−3.26 mol dm−3
2[Fe(H2O)6]3+ | ⇌ [Fe(H2O)4(OH)]4+2 \+ 2H+ \+ 2H2O | K = 10−2.91 mol dm−3
Blue-green iron(II) sulfate heptahydrate

As pH rises above 0 the above yellow hydrolyzed species form and as it rises above 2–3, reddish-brown hydrous iron(III) oxide precipitates out of solution. Although Fe3+ has a d5 configuration, its absorption spectrum is not like that of Mn2+ with its weak, spin-forbidden d–d bands, because Fe3+ has higher positive charge and is more polarizing, lowering the energy of its ligand-to-metal charge transfer absorptions. Thus, all the above complexes are rather strongly colored, with the single exception of the hexaquo ion – and even that has a spectrum dominated by charge transfer in the near ultraviolet region.[71] On the other hand, the pale green iron(II) hexaquo ion [Fe(H2O)6]2+ does not undergo appreciable hydrolysis. Carbon dioxide is not evolved when carbonate anions are added, which instead results in white iron(II) carbonate being precipitated out. In excess carbon dioxide this forms the slightly soluble bicarbonate, which occurs commonly in groundwater, but it oxidises quickly in air to form iron(III) oxide that accounts for the brown deposits present in a sizeable number of streams.[72]

### Coordination compounds

[edit]

Due to its electronic structure, iron has a very large coordination and organometallic chemistry.

The two enantiomorphs of the ferrioxalate ion

Many coordination compounds of iron are known. A typical six-coordinate anion is hexachloroferrate(III), [FeCl6]3−, found in the mixed salt tetrakis(methylammonium) hexachloroferrate(III) chloride.[73][74] Complexes with multiple bidentate ligands have geometric isomers. For example, the trans-chlorohydridobis(bis-1,2-(diphenylphosphino)ethane)iron(II) complex is used as a starting material for compounds with the Fe(dppe)2 moiety.[75][76] The ferrioxalate ion with three oxalate ligands displays helical chirality with its two non-superposable geometries labelled Λ (lambda) for the left-handed screw axis and Δ (delta) for the right-handed screw axis, in line with IUPAC conventions.[71] Potassium ferrioxalate is used in chemical actinometry and along with its sodium salt undergoes photoreduction applied in old-style photographic processes. The dihydrate of iron(II) oxalate has a polymeric structure with co-planar oxalate ions bridging between iron centres with the water of crystallisation located forming the caps of each octahedron, as illustrated below.[77]

Crystal structure of iron(II) oxalate dihydrate, showing iron (gray), oxygen (red), carbon (black), and hydrogen (white) atoms. Blood-red positive thiocyanate test for iron(III)

Iron(III) complexes are quite similar to those of chromium(III) with the exception of iron(III)'s preference for O-donor instead of N-donor ligands. The latter tend to be rather more unstable than iron(II) complexes and often dissociate in water. Many Fe–O complexes show intense colors and are used as tests for phenols or enols. For example, in the ferric chloride test, used to determine the presence of phenols, iron(III) chloride reacts with a phenol to form a deep violet complex:[71]

3 ArOH + FeCl3 → Fe(OAr)3 \+ 3 HCl (Ar = aryl)

Among the halide and pseudohalide complexes, fluoro complexes of iron(III) are the most stable, with the colorless [FeF5(H2O)]2− being the most stable in aqueous solution. Chloro complexes are less stable and favor tetrahedral coordination as in [FeCl4]−; [FeBr4]− and [FeI4]− are reduced easily to iron(II). Thiocyanate is a common test for the presence of iron(III) as it forms the blood-red [Fe(SCN)(H2O)5]2+. Like manganese(II), most iron(III) complexes are high-spin, the exceptions being those with ligands that are high in the spectrochemical series such as cyanide. An example of a low-spin iron(III) complex is [Fe(CN)6]3−. Iron shows a great variety of electronic spin states, including every possible spin quantum number value for a d-block element from 0 (diamagnetic) to 5⁄2 (5 unpaired electrons). This value is always half the number of unpaired electrons. Complexes with zero to two unpaired electrons are considered low-spin and those with four or five are considered high-spin.[67]

Iron(II) complexes are less stable than iron(III) complexes but the preference for O-donor ligands is less marked, so that for example [Fe(NH3)6]2+ is known while [Fe(NH3)6]3+ is not. They have a tendency to be oxidized to iron(III) but this can be moderated by low pH and the specific ligands used.[72]

### Organometallic compounds

[edit]

Iron penta-
carbonyl

Organoiron chemistry is the study of organometallic compounds of iron, where carbon atoms are covalently bound to the metal atom. They are many and varied, including cyanide complexes, carbonyl complexes, sandwich and half-sandwich compounds.

Prussian blue

Prussian blue or "ferric ferrocyanide", Fe4[Fe(CN)6]3, is an old and well-known iron-cyanide complex, extensively used as pigment and in several other applications. Its formation can be used as a simple wet chemistry test to distinguish between aqueous solutions of Fe2+ and Fe3+ as they react (respectively) with potassium ferricyanide and potassium ferrocyanide to form Prussian blue.[63]

Another old example of an organoiron compound is iron pentacarbonyl, Fe(CO)5, in which a neutral iron atom is bound to the carbon atoms of five carbon monoxide molecules. The compound can be used to make carbonyl iron powder, a highly reactive form of metallic iron. Thermolysis of iron pentacarbonyl gives triiron dodecacarbonyl, Fe3(CO)12, a complex with a cluster of three iron atoms at its core. Collman's reagent, disodium tetracarbonylferrate, is a useful reagent for organic chemistry; it contains iron in the −2 oxidation state. Cyclopentadienyliron dicarbonyl dimer contains iron in the rare +1 oxidation state.[78]

Structural formula of ferrocene and a powdered sample

A landmark in this field was the discovery in 1951 of the remarkably stable sandwich compound ferrocene Fe(C5H5)2, by Pauson and Kealy[79] and independently by Miller and colleagues,[80] whose surprising molecular structure was determined only a year later by Woodward and Wilkinson[81] and Fischer.[82] Ferrocene is still one of the most important tools and models in this class.[83]

Iron-centered organometallic species are used as catalysts. The Knölker complex, for example, is a transfer hydrogenation catalyst for ketones.[84]

### Industrial uses

[edit]

The iron compounds produced on the largest scale in industry are iron(II) sulfate (FeSO4·7H2O) and iron(III) chloride (FeCl3). The former is one of the most readily available sources of iron(II), but is less stable to aerial oxidation than Mohr's salt ((NH4)2Fe(SO4)2·6H2O). Iron(II) compounds tend to be oxidized to iron(III) compounds in the air.[63]

## History

[edit]

Main article: History of ferrous metallurgy

### Development of iron metallurgy

[edit]

Iron is one of the elements undoubtedly known to the ancient world.[85] It has been worked, or wrought, for millennia. However, iron artefacts of great age are much rarer than objects made of gold or silver due to the ease with which iron corrodes.[86] The technology developed slowly, and even after the discovery of smelting it took many centuries for iron to replace bronze as the metal of choice for tools and weapons.

#### Meteoritic iron

[edit]

Iron harpoon head from Greenland. The iron edge covers a narwhal tusk harpoon using meteorite iron from the Cape York meteorite, one of the largest iron meteorites known.

Beads made from meteoric iron in 3500 BC or earlier were found in Gerzeh, Egypt by G. A. Wainwright.[87] The beads contain 7.5% nickel, which is a signature of meteoric origin since iron found in the Earth's crust generally has only minuscule nickel impurities.

Meteoric iron was highly regarded due to its origin in the heavens and was often used to forge weapons and tools.[87] For example, a dagger made of meteoric iron was found in the tomb of Tutankhamun, containing similar proportions of iron, cobalt, and nickel to a meteorite discovered in the area, deposited by an ancient meteor shower.[88][89][90] Items that were likely made of iron by Egyptians date from 3000 to 2500 BC.[86]

Meteoritic iron is comparably soft and ductile and easily cold forged but may get brittle when heated because of the nickel content.[91]

#### Wrought iron

[edit]

Main article: Wrought iron

Further information: Ancient iron production

The symbol for Mars has been used since antiquity to represent iron. The iron pillar of Delhi is an example of the iron extraction and processing methodologies of early India.

The first iron production started in the Middle Bronze Age, but it took several centuries before iron displaced bronze. Samples of smelted iron from Asmar, Mesopotamia and Tall Chagar Bazaar in northern Syria were made sometime between 3000 and 2700 BC.[92] The Hittites established an empire in north-central Anatolia around 1600 BC. They appear to be the first to understand the production of iron from its ores and regard it highly in their society.[93] The Hittites began to smelt iron between 1500 and 1200 BC and the practice spread to the rest of the Near East after their empire fell in 1180 BC.[92] The subsequent period is called the Iron Age.

Artifacts of smelted iron are found in India dating from 1800 to 1200 BC,[94] and in the Levant from about 1500 BC (suggesting smelting in Anatolia or the Caucasus).[95][96] Alleged references (compare history of metallurgy in South Asia) to iron in the Indian Vedas have been used for claims of a very early usage of iron in India respectively to date the texts as such. The rigveda term ayas (metal) refers to copper, while iron which is called as śyāma ayas, literally "black copper", first is mentioned in the post-rigvedic Atharvaveda.[97]

Some archaeological evidence suggests iron was smelted in Zimbabwe and southeast Africa as early as the eighth century BC.[98] Iron working was introduced to Greece in the late 11th century BC, from which it spread quickly throughout Europe.[99]

Iron sickle from Ancient Greece

The spread of ironworking in Central and Western Europe is associated with Celtic expansion. According to Pliny the Elder, iron use was common in the Roman era.[87] In the lands of what is now considered China, iron appears approximately 700–500 BC.[100] Iron smelting may have been introduced into China through Central Asia.[101] The earliest evidence of the use of a blast furnace in China dates to the 1st century AD,[102] and cupola furnaces were used as early as the Warring States period (403–221 BC).[103] Usage of the blast and cupola furnace remained widespread during the Tang and Song dynasties.[104]

During the Industrial Revolution in Britain, Henry Cort began refining iron from pig iron to wrought iron (or bar iron) using innovative production systems. In 1783 he patented the puddling process for refining iron ore. It was later improved by others, including Joseph Hall.[105]

#### Cast iron

[edit]

Main article: Cast iron

Cast iron was first produced in China during 5th century BC,[106] but was hardly in Europe until the medieval period.[107][108] The earliest cast iron artifacts were discovered by archaeologists in what is now modern Luhe County, Jiangsu in China. Cast iron was used in ancient China for warfare, agriculture, and architecture.[109] During the medieval period, means were found in Europe of producing wrought iron from cast iron (in this context known as pig iron) using finery forges. For all these processes, charcoal was required as fuel.[110]

Coalbrookdale by Night, 1801. Blast furnaces light the iron making town of Coalbrookdale.

Medieval blast furnaces were about 10 feet (3.0 m) tall and made of fireproof brick; forced air was usually provided by hand-operated bellows.[108] Modern blast furnaces have grown much bigger, with hearths fourteen meters in diameter that allow them to produce thousands of tons of iron each day, but essentially operate in much the same way as they did during medieval times.[110]

In 1709, Abraham Darby I established a coke-fired blast furnace to produce cast iron, replacing charcoal, although continuing to use blast furnaces. The ensuing availability of inexpensive iron was one of the factors leading to the Industrial Revolution. Toward the end of the 18th century, cast iron began to replace wrought iron for certain purposes, because it was cheaper. Carbon content in iron was not implicated as the reason for the differences in properties of wrought iron, cast iron, and steel until the 18th century.[92]

Since iron was becoming cheaper and more plentiful, it also became a major structural material following the building of the innovative first iron bridge in 1778. This bridge still stands today as a monument to the role iron played in the Industrial Revolution. Following this, iron was used in rails, boats, ships, aqueducts, and buildings, as well as in iron cylinders in steam engines.[110] Railways have been central to the formation of modernity and ideas of progress[111] and various languages refer to railways as iron road (e.g. French chemin de fer, German Eisenbahn, Turkish demiryolu, Russian железная дорога, Chinese, Japanese, and Korean 鐵道, Vietnamese đường sắt).

#### Steel

[edit]

Main article: Steel

See also: Steelmaking

Steel (with smaller carbon content than pig iron but more than wrought iron) was first produced in antiquity by using a bloomery. Blacksmiths in Luristan in western Persia were making good steel by 1000 BC.[92] Then improved versions, Wootz steel by India and Damascus steel were developed around 300 BC and AD 500 respectively. These methods were specialized, and so steel did not become a major commodity until the 1850s.[112]

New methods of producing it by carburizing bars of iron in the cementation process were devised in the 17th century. In the Industrial Revolution, new methods of producing bar iron without charcoal were devised and these were later applied to produce steel. In the late 1850s, Henry Bessemer invented a new steelmaking process, involving blowing air through molten pig iron, to produce mild steel. This made steel much more economical, thereby leading to wrought iron no longer being produced in large quantities.[113]

### Foundations of modern chemistry

[edit]

In 1774, Antoine Lavoisier used the reaction of water steam with metallic iron inside an incandescent iron tube to produce hydrogen in his experiments leading to the demonstration of the conservation of mass, which was instrumental in changing chemistry from a qualitative science to a quantitative one.[114]

## Symbolic role

[edit]

"Ich gab Gold für Eisen" – "I gave gold for iron". German-American brooch from WWI.

Iron plays a certain role in mythology and has found various usage as a metaphor and in folklore. The Greek poet Hesiod's Works and Days (lines 109–201) lists different ages of man named after metals like gold, silver, bronze and iron to account for successive ages of humanity.[115] The Iron Age was closely related with Rome, and in Ovid's Metamorphoses

> The Virtues, in despair, quit the earth; and the depravity of man becomes universal and complete. Hard steel succeeded then.

— Ovid, Metamorphoses, Book I, Iron age, line 160 ff

An example of the importance of iron's symbolic role may be found in the German Campaign of 1813. Frederick William III commissioned then the first Iron Cross as military decoration. Berlin iron jewellery reached its peak production between 1813 and 1815, when the Prussian royal family urged citizens to donate gold and silver jewellery for military funding. The inscription Ich gab Gold für Eisen (I gave gold for iron) was used as well in later war efforts.[116]

## Production of metallic iron

[edit]

Iron powder

### Laboratory routes

[edit]

For a few limited purposes when it is needed, pure iron is produced in the laboratory in small quantities by reducing the pure oxide or hydroxide with hydrogen, or forming iron pentacarbonyl and heating it to 250 °C so that it decomposes to form pure iron powder.[48] Another method is electrolysis of ferrous chloride onto an iron cathode.[117]

### Main industrial route

[edit]

See also: Iron ore

Iron production 2009 (million tonnes)[118][World on iron ore??? (January 2023)">dubious – discuss] Country | Iron ore | Pig iron | Direct iron | Steel

|
|
|
|

China | 1,114.9 | 549.4 |  | 573.6
Australia | 393.9 | 4.4 |  | 5.2
Brazil | 305.0 | 25.1 | 0.011 | 26.5
Japan |  | 66.9 |  | 87.5
India | 257.4 | 38.2 | 23.4 | 63.5
Russia | 92.1 | 43.9 | 4.7 | 60.0
Ukraine | 65.8 | 25.7 |  | 29.9
South Korea | 0.1 | 27.3 |  | 48.6
Germany | 0.4 | 20.1 | 0.38 | 32.7
World | 1,594.9 | 914.0 | 64.5 | 1,232.4

Nowadays, the industrial production of iron or steel consists of two main stages. In the first stage, iron ore is reduced with coke in a blast furnace, and the molten metal is separated from gross impurities such as silicate minerals. This stage yields an alloy – pig iron – that contains relatively large amounts of carbon. In the second stage, the amount of carbon in the pig iron is lowered by oxidation to yield wrought iron, steel, or cast iron.[119] Other metals can be added at this stage to form alloy steels.

#### Blast furnace processing

[edit]

Main article: Blast furnace

The blast furnace is loaded with iron ores, usually hematite Fe2O3 or magnetite Fe3O4, along with coke (coal that has been separately baked to remove volatile components) and flux (limestone or dolomite). "Blasts" of air pre-heated to 900 °C (sometimes with oxygen enrichment) is blown through the mixture, in sufficient amount to turn the carbon into carbon monoxide:[119]

2 C + O2 → 2 CO

This reaction raises the temperature to about 2000 °C. The carbon monoxide reduces the iron ore to metallic iron:[119]

Fe2O3 \+ 3 CO → 2 Fe + 3 CO2

Some iron in the high-temperature lower region of the furnace reacts directly with the coke:[119]

2 Fe2O3 \+ 3 C → 4 Fe + 3 CO2

The flux removes silicaceous minerals in the ore, which would otherwise clog the furnace: The heat of the furnace decomposes the carbonates to calcium oxide, which reacts with any excess silica to form a slag composed of calcium silicate CaSiO3 or other products. At the furnace's temperature, the metal and the slag are both molten. They collect at the bottom as two immiscible liquid layers (with the slag on top), that are then easily separated.[119] The slag can be used as a material in road construction or to improve mineral-poor soils for agriculture.[108]

Steelmaking thus remains one of the largest industrial contributors of CO2 emissions in the world.[120]

* 17th century Chinese illustration of workers at a blast furnace, making wrought iron from pig iron[121]

* How iron was extracted in the 19th century

* Iron furnace in Columbus, Ohio, 1922

#### Steelmaking

[edit]

Main articles: Steelmaking and Ironworks

The pig iron produced by the blast furnace process contains up to 4–5% carbon (by mass), with small amounts of other impurities like sulfur, magnesium, phosphorus, and manganese. This high level of carbon makes it relatively weak and brittle. Reducing the amount of carbon to 0.002–2.1% produces steel, which may be up to 1000 times harder than pure iron. A great variety of steel articles can then be made by cold working, hot rolling, forging, machining, etc. Removing the impurities from pig iron, but leaving 2–4% carbon, results in cast iron, which is cast by foundries into articles such as stoves, pipes, radiators, lamp-posts, and rails.[119]

Steel products often undergo various heat treatments after they are forged to shape. Annealing consists of heating them to 700–800 °C for several hours and then gradual cooling. It makes the steel softer and more workable.[122]

* This heap of iron ore pellets will be used in steel production.

* A pot of molten iron being used to make steel

### Direct iron reduction

[edit]

Owing to environmental concerns, alternative methods of processing iron have been developed. "Direct iron reduction" reduces iron ore to a ferrous lump called "sponge" iron or "direct" iron that is suitable for steelmaking.[108] Two main reactions comprise the direct reduction process:

Natural gas is partially oxidized (with heat and a catalyst):[108]

2 CH4 \+ O2 → 2 CO + 4 H2

Iron ore is then treated with these gases in a furnace, producing solid sponge iron:[108]

Fe2O3 \+ CO + 2 H2 → 2 Fe + CO2 \+ 2 H2O

Silica is removed by adding a limestone flux as described above.[108]

### Thermite process

[edit]

Main article: Thermite

Ignition of a mixture of aluminium powder and iron oxide yields metallic iron via the thermite reaction:

Fe2O3 \+ 2 Al → 2 Fe + Al2O3

Alternatively pig iron may be made into steel (with up to about 2% carbon) or wrought iron (commercially pure iron). Various processes have been used for this, including finery forges, puddling furnaces, Bessemer converters, open hearth furnaces, basic oxygen furnaces, and electric arc furnaces. In all cases, the objective is to oxidize some or all of the carbon, together with other impurities. On the other hand, other metals may be added to make alloy steels.[110]

### Molten oxide electrolysis

[edit]

Molten oxide electrolysis (MOE) uses electrolysis of molten iron oxide to yield metallic iron. It is studied in laboratory-scale experiments and is proposed as a method for industrial iron production that has no direct emissions of carbon dioxide. It uses a liquid iron cathode, an anode formed from an alloy of chromium, aluminium and iron,[123] and the electrolyte is a mixture of molten metal oxides into which iron ore is dissolved. The current keeps the electrolyte molten and reduces the iron oxide. Oxygen gas is produced in addition to liquid iron. The only carbon dioxide emissions come from any fossil fuel-generated electricity used to heat and reduce the metal.[124][125][126]

## Applications

[edit]

Characteristic values of tensile strength (TS) and Brinell hardness (BH) of various forms of iron.[127][128] Material  | TS
(MPa)  | BH
(Brinell)

|
|

Iron whiskers | 11000  |
Ausformed (hardened)
steel  | 2930  | 850–1200
Martensitic steel | 2070  | 600
Bainitic steel | 1380  | 400
Pearlitic steel | 1200  | 350
Cold-worked iron  | 690  | 200
Small-grain iron  | 340  | 100
Carbon-containing iron  | 140  | 40
Pure, single-crystal iron  | 10  | 3

### As structural material

[edit]

Iron is the most widely used of all the metals, accounting for over 90% of worldwide metal production.[citation needed] Its low cost and high strength often make it the material of choice to withstand stress or transmit forces, such as the construction of machinery and machine tools, rails, automobiles, ship hulls, concrete reinforcing bars, and the load-carrying framework of buildings. Since pure iron is quite soft, it is most commonly combined with alloying elements to make steel.[129]

#### Mechanical properties

[edit]

The mechanical properties of iron and its alloys are extremely relevant to their structural applications. Those properties can be evaluated in various ways, including the Brinell test, the Rockwell test and the Vickers hardness test.

The properties of pure iron are often used to calibrate measurements or to compare tests.[128][130] However, the mechanical properties of iron are significantly affected by the sample's purity: pure, single crystals of iron are actually softer than aluminium,[127] and the purest industrially produced iron (99.99%) has a hardness of 20–30 Brinell.[131] The pure iron (99.9%～99.999%), especially called electrolytic iron, is industrially produced by electrolytic refining.

An increase in the carbon content will cause a significant increase in the hardness and tensile strength of iron. Maximum hardness of 65 Rc is achieved with a 0.6% carbon content, although the alloy has low tensile strength.[132] Because of the softness of iron, it is much easier to work with than its heavier congeners ruthenium and osmium.[17]

#### Types of steels and alloys

[edit]

See also: Steel

Iron-carbon phase diagram

α-Iron is a fairly soft metal that can dissolve only a small concentration of carbon (no more than 0.021% by mass at 910 °C).[133] Austenite (γ-iron) is similarly soft and metallic but can dissolve considerably more carbon (as much as 2.04% by mass at 1146 °C). This form of iron is used in the type of stainless steel used for making cutlery, and hospital and food-service equipment.[21]

Commercially available iron is classified based on purity and the abundance of additives. Pig iron has 3.5–4.5% carbon[134] and contains varying amounts of contaminants such as sulfur, silicon and phosphorus. Pig iron is not a saleable product, but rather an intermediate step in the production of cast iron and steel. The reduction of contaminants in pig iron that negatively affect material properties, such as sulfur and phosphorus, yields cast iron containing 2–4% carbon, 1–6% silicon, and small amounts of manganese.[119] Pig iron has a melting point in the range of 1420–1470 K, which is lower than either of its two main components, and makes it the first product to be melted when carbon and iron are heated together.[11] Its mechanical properties vary greatly and depend on the form the carbon takes in the alloy.[17]

"White" cast irons contain their carbon in the form of cementite, or iron carbide (Fe3C).[17] This hard, brittle compound dominates the mechanical properties of white cast irons, rendering them hard, but unresistant to shock. The broken surface of a white cast iron is full of fine facets of the broken iron carbide, a very pale, silvery, shiny material, hence the appellation. Cooling a mixture of iron with 0.8% carbon slowly below 723 °C to room temperature results in separate, alternating layers of cementite and α-iron, which is soft and malleable and is called pearlite for its appearance. Rapid cooling, on the other hand, does not allow time for this separation and creates hard and brittle martensite. The steel can then be tempered by reheating to a temperature in between, changing the proportions of pearlite and martensite. The end product below 0.8% carbon content is a pearlite-αFe mixture, and that above 0.8% carbon content is a pearlite-cementite mixture.[17]

In gray iron the carbon exists as separate, fine flakes of graphite, and also renders the material brittle due to the sharp edged flakes of graphite that produce stress concentration sites within the material.[135] A newer variant of gray iron, referred to as ductile iron, is specially treated with trace amounts of magnesium to alter the shape of graphite to spheroids, or nodules, reducing the stress concentrations and vastly increasing the toughness and strength of the material.[135]

Wrought iron contains less than 0.25% carbon but large amounts of slag that give it a fibrous characteristic.[134] Wrought iron is more corrosion resistant than steel. It has been almost completely replaced by mild steel, which corrodes more readily than wrought iron, but is cheaper and more widely available. Carbon steel contains 2.0% carbon or less,[136] with small amounts of manganese, sulfur, phosphorus, and silicon. Alloy steels contain varying amounts of carbon as well as other metals, such as chromium, vanadium, molybdenum, nickel, tungsten, etc. Their alloy content raises their cost, and so they are usually only employed for specialist uses. One common alloy steel, though, is stainless steel. Recent developments in ferrous metallurgy have produced a growing range of microalloyed steels, also termed 'HSLA' or high-strength, low alloy steels, containing tiny additions to produce high strengths and often spectacular toughness at minimal cost.[136][137][138]

Alloys with high purity elemental makeups (such as alloys of electrolytic iron) have specifically enhanced properties such as ductility, tensile strength, toughness, fatigue strength, heat resistance, and corrosion resistance.

Apart from traditional applications, iron is also used for protection from ionizing radiation. Although it is lighter than another traditional protection material, lead, it is much stronger mechanically.[139]

The main disadvantage of iron and steel is that pure iron, and most of its alloys, suffer badly from rust if not protected in some way, a cost amounting to over 1% of the world's economy.[140] Painting, galvanization, passivation, plastic coating and bluing are all used to protect iron from rust by excluding water and oxygen or by cathodic protection. The mechanism of the rusting of iron is as follows:[140]

Cathode: 3 O2 \+ 6 H2O + 12 e− → 12 OH−
Anode: 4 Fe → 4 Fe2+ \+ 8 e−; 4 Fe2+ → 4 Fe3+ \+ 4 e−
Overall: 4 Fe + 3 O2 \+ 6 H2O → 4 Fe3+ \+ 12 OH− → 4 Fe(OH)3 or 4 FeO(OH) + 4 H2O

The electrolyte is usually iron(II) sulfate in urban areas (formed when atmospheric sulfur dioxide attacks iron), and salt particles in the atmosphere in seaside areas.[140]

### Catalysts and reagents

[edit]

Because Fe is inexpensive and nontoxic, much effort has been devoted to the development of Fe-based catalysts and reagents. Iron is however less common as a catalyst in commercial processes than more expensive metals.[141] In biology, Fe-containing enzymes are pervasive.[142]

Iron catalysts are traditionally used in the Haber–Bosch process for the production of ammonia and the Fischer–Tropsch process for conversion of carbon monoxide to hydrocarbons for fuels and lubricants.[143] Powdered iron in an acidic medium is used in the Bechamp reduction, the conversion of nitrobenzene to aniline.[144]

### Iron compounds

[edit]

Iron(III) oxide mixed with aluminium powder can be ignited to create a thermite reaction, used in welding large iron parts (like rails) and purifying ores. Iron(III) oxide and oxyhydroxide are used as reddish and ocher pigments.

Iron(III) chloride finds use in water purification and sewage treatment, in the dyeing of cloth, as a coloring agent in paints, as an additive in animal feed, and as an etchant for copper in the manufacture of printed circuit boards.[145] It can also be dissolved in alcohol to form tincture of iron, which is used as a medicine to stop bleeding in canaries.[146]

Iron(II) sulfate is used as a precursor to other iron compounds. It is also used to reduce chromate in cement. It is used to fortify foods and treat iron deficiency anemia. Iron(III) sulfate is used in settling minute sewage particles in tank water. Iron(II) chloride is used as a reducing flocculating agent, in the formation of iron complexes and magnetic iron oxides, and as a reducing agent in organic synthesis.[145]

Sodium nitroprusside is a drug used as a vasodilator. It is on the World Health Organization's List of Essential Medicines.[147]

## Biological and pathological role

[edit]

Main article: Iron in biology

Iron is required for life.[10][148][149] The iron–sulfur clusters are pervasive and include nitrogenase, the enzymes responsible for biological nitrogen fixation. Iron-containing proteins participate in transport, storage and use of oxygen.[10] Iron proteins are involved in electron transfer.[150]

Simplified structure of Heme B; in the protein additional ligand(s) are attached to Fe.

Examples of iron-containing proteins in higher organisms include hemoglobin, cytochrome (see high-valent iron), and catalase.[10][151] The average adult human contains about 0.005% body weight of iron, or about four grams, of which three quarters is in hemoglobin—a level that remains constant despite only about one milligram of iron being absorbed each day,[150] because the human body recycles its hemoglobin for the iron content.[152]

Microbial growth may be assisted by oxidation of iron(II) or by reduction of iron(III).[153]

### Biochemistry

[edit]

Iron acquisition poses a problem for aerobic organisms because ferric iron is poorly soluble near neutral pH. Thus, these organisms have developed means to absorb iron as complexes, sometimes taking up ferrous iron before oxidising it back to ferric iron.[10] In particular, bacteria have evolved very high-affinity sequestering agents called siderophores.[154][155][156]

After uptake in human cells, iron storage is precisely regulated.[10][157] A major component of this regulation is the protein transferrin, which binds iron ions absorbed from the duodenum and carries it in the blood to cells.[10][158] Transferrin contains Fe3+ in the middle of a distorted octahedron, bonded to one nitrogen, three oxygens and a chelating carbonate anion that traps the Fe3+ ion: it has such a high stability constant that it is very effective at taking up Fe3+ ions even from the most stable complexes. At the bone marrow, transferrin is reduced from Fe3+ to Fe2+ and stored as ferritin to be incorporated into hemoglobin.[150]

The most commonly known and studied bioinorganic iron compounds (biological iron molecules) are the heme proteins: examples are hemoglobin, myoglobin, and cytochrome P450.[10] These compounds participate in transporting gases, building enzymes, and transferring electrons.[150] Metalloproteins are a group of proteins with metal ion cofactors. Some examples of iron metalloproteins are ferritin and rubredoxin.[150] Many enzymes vital to life contain iron, such as catalase,[159] lipoxygenases,[160] and IRE-BP.[161]

Hemoglobin is an oxygen carrier that occurs in red blood cells and contributes their color, transporting oxygen in the arteries from the lungs to the muscles where it is transferred to myoglobin, which stores it until it is needed for the metabolic oxidation of glucose, generating energy.[10] Here the hemoglobin binds to carbon dioxide, produced when glucose is oxidized, which is transported through the veins by hemoglobin (predominantly as bicarbonate anions) back to the lungs where it is exhaled.[150] In hemoglobin, the iron is in one of four heme groups and has six possible coordination sites; four are occupied by nitrogen atoms in a porphyrin ring, the fifth by an imidazole nitrogen in a histidine residue of one of the protein chains attached to the heme group, and the sixth is reserved for the oxygen molecule it can reversibly bind to.[150] When hemoglobin is not attached to oxygen (and is then called deoxyhemoglobin), the Fe2+ ion at the center of the heme group (in the hydrophobic protein interior) is in a high-spin configuration. It is thus too large to fit inside the porphyrin ring, which bends instead into a dome with the Fe2+ ion about 55 picometers above it. In this configuration, the sixth coordination site reserved for the oxygen is blocked by another histidine residue.[150]

When deoxyhemoglobin picks up an oxygen molecule, this histidine residue moves away and returns once the oxygen is securely attached to form a hydrogen bond with it. This results in the Fe2+ ion switching to a low-spin configuration, resulting in a 20% decrease in ionic radius so that now it can fit into the porphyrin ring, which becomes planar.[150] Additionally, this hydrogen bonding results in the tilting of the oxygen molecule, resulting in a Fe–O–O bond angle of around 120° that avoids the formation of Fe–O–Fe or Fe–O2–Fe bridges that would lead to electron transfer, the oxidation of Fe2+ to Fe3+, and the destruction of hemoglobin. This results in a movement of all the protein chains that leads to the other subunits of hemoglobin changing shape to a form with larger oxygen affinity. Thus, when deoxyhemoglobin takes up oxygen, its affinity for more oxygen increases, and vice versa.[150] Myoglobin, on the other hand, contains only one heme group and hence this cooperative effect cannot occur. Thus, while hemoglobin is almost saturated with oxygen in the high partial pressures of oxygen found in the lungs, its affinity for oxygen is much lower than that of myoglobin, which oxygenates even at low partial pressures of oxygen found in muscle tissue.[150] As described by the Bohr effect (named after Christian Bohr, the father of Niels Bohr), the oxygen affinity of hemoglobin diminishes in the presence of carbon dioxide.[150]

A heme unit of human carboxyhemoglobin, showing the carbonyl ligand at the apical position, trans to the histidine residue[162]

Carbon monoxide and phosphorus trifluoride are poisonous to humans because they bind to hemoglobin similarly to oxygen, but with much more strength, so that oxygen can no longer be transported throughout the body. Hemoglobin bound to carbon monoxide is known as carboxyhemoglobin. This effect also plays a minor role in the toxicity of cyanide, but there the major effect is by far its interference with the proper functioning of the electron transport protein cytochrome a.[150] The cytochrome proteins also involve heme groups and are involved in the metabolic oxidation of glucose by oxygen. The sixth coordination site is then occupied by either another imidazole nitrogen or a methionine sulfur, so that these proteins are largely inert to oxygen—with the exception of cytochrome a, which bonds directly to oxygen and thus is very easily poisoned by cyanide.[150] Here, the electron transfer takes place as the iron remains in low spin but changes between the +2 and +3 oxidation states. Since the reduction potential of each step is slightly greater than the previous one, the energy is released step-by-step and can thus be stored in adenosine triphosphate. Cytochrome a is slightly distinct, as it occurs at the mitochondrial membrane, binds directly to oxygen, and transports protons as well as electrons, as follows:[150]

4 Cytc2+ \+ O2 \+ 8H+
inside → 4 Cytc3+ \+ 2 H2O + 4H+
outside

Although the heme proteins are the most important class of iron-containing proteins, the iron–sulfur proteins are also very important, being involved in electron transfer, which is possible since iron can exist stably in either the +2 or +3 oxidation states. These have one, two, four, or eight iron atoms that are each approximately tetrahedrally coordinated to four sulfur atoms; because of this tetrahedral coordination, they always have high-spin iron. The simplest of such compounds is rubredoxin, which has only one iron atom coordinated to four sulfur atoms from cysteine residues in the surrounding peptide chains. Another important class of iron–sulfur proteins is the ferredoxins, which have multiple iron atoms. Transferrin does not belong to either of these classes.[150]

The ability of sea mussels to maintain their grip on rocks in the ocean is facilitated by their use of organometallic iron-based bonds in their protein-rich cuticles. Based on synthetic replicas, the presence of iron in these structures increased elastic modulus 770 times, tensile strength 58 times, and toughness 92 times. The amount of stress required to permanently damage them increased 76 times.[163]

### Nutrition

[edit]

#### Diet

[edit]

Iron is pervasive, but particularly rich sources of dietary iron include red meat, oysters, beans, poultry, fish, leaf vegetables, watercress, tofu, and blackstrap molasses.[10] Bread and breakfast cereals are sometimes specifically fortified with iron.[10][164]

Iron provided by dietary supplements is often found as iron(II) fumarate, although iron(II) sulfate is cheaper and is absorbed equally well.[145] Elemental iron, or reduced iron, despite being absorbed at only one-third to two-thirds the efficiency (relative to iron sulfate),[165] is often added to foods such as breakfast cereals or enriched wheat flour. Iron is most available to the body when chelated to amino acids[166] and is also available for use as a common iron supplement. Glycine, the least expensive amino acid, is most often used to produce iron glycinate supplements.[167]

#### Dietary recommendations

[edit]

The U.S. Institute of Medicine (IOM) updated Estimated Average Requirements (EARs) and Recommended Dietary Allowances (RDAs) for iron in 2001.[10] The current EAR for iron for women ages 14‍–‍18 is 7.9 mg/day, 8.1 mg/day for ages 19‍–‍50 and 5.0 mg/day thereafter (postmenopause). For men, the EAR is 6.0 mg/day for ages 19 and up. The RDA is 15.0 mg/day for women ages 15‍–‍18, 18.0 mg/day for ages 19‍–‍50 and 8.0 mg/day thereafter. For men, 8.0 mg/day for ages 19 and up. RDAs are higher than EARs so as to identify amounts that will cover people with higher-than-average requirements. RDA for pregnancy is 27 mg/day and, for lactation, 9 mg/day.[10] For children ages 1‍–‍3 years 7 mg/day, 10 mg/day for ages 4–8 and 8 mg/day for ages 9‍–‍13. As for safety, the IOM also sets Tolerable upper intake levels (ULs) for vitamins and minerals when evidence is sufficient. In the case of iron, the UL is set at 45 mg/day. Collectively the EARs, RDAs and ULs are referred to as Dietary Reference Intakes.[168]

The European Food Safety Authority (EFSA) refers to the collective set of information as Dietary Reference Values, with Population Reference Intake (PRI) instead of RDA, and Average Requirement instead of EAR. AI and UL are defined the same as in the United States. For women the PRI is 13 mg/day ages 15‍–‍17 years, 16 mg/day for women ages 18 and up who are premenopausal and 11 mg/day postmenopausal. For pregnancy and lactation, 16 mg/day. For men the PRI is 11 mg/day ages 15 and older. For children ages 1 to 14, the PRI increases from 7 to 11 mg/day. The PRIs are higher than the U.S. RDAs, with the exception of pregnancy.[169] The EFSA reviewed the same safety question did not establish a UL.[170]

Infants may require iron supplements if they are bottle-fed cow's milk.[171] Frequent blood donors are at risk of low iron levels and are often advised to supplement their iron intake.[172]

For U.S. food and dietary supplement labeling purposes, the amount in a serving is expressed as a percent of Daily Value (%DV). For iron labeling purposes, 100% of the Daily Value was 18 mg, and as of May 27, 2016[update] remained unchanged at 18 mg.[173][174] A table of the old and new adult daily values is provided at Reference Daily Intake.

### Deficiency

[edit]

Main article: Iron deficiency

Iron deficiency is the most common nutritional deficiency in the world.[10][175][176][177] When loss of iron is not adequately compensated by adequate dietary iron intake, a state of latent iron deficiency occurs, which over time leads to iron-deficiency anemia if left untreated, which is characterised by an insufficient number of red blood cells and an insufficient amount of hemoglobin.[178] Children, pre-menopausal women (women of child-bearing age), and people with poor diet are most susceptible to the disease. Most cases of iron-deficiency anemia are mild, but if not treated can cause problems like fast or irregular heartbeat, complications during pregnancy, and delayed growth in infants and children.[179]

The brain is resistant to acute iron deficiency due to the slow transport of iron through the blood brain barrier.[180] Acute fluctuations in iron status (marked by serum ferritin levels) do not reflect brain iron status, but prolonged nutritional iron deficiency is suspected to reduce brain iron concentrations over time.[181][182] In the brain, iron plays a role in oxygen transport, myelin synthesis, mitochondrial respiration, and as a cofactor for neurotransmitter synthesis and metabolism.[183] Animal models of nutritional iron deficiency report biomolecular changes resembling those seen in Parkinson's and Huntington's disease.[184][185] However, age-related accumulation of iron in the brain has also been linked to the development of Parkinson's.[186]

### Excess

[edit]

Main article: Iron overload

Iron uptake is tightly regulated by the human body, which has no regulated physiological means of excreting iron. Only small amounts of iron are lost daily due to mucosal and skin epithelial cell sloughing, so control of iron levels is primarily accomplished by regulating uptake.[187] Regulation of iron uptake is impaired in some people as a result of a genetic defect that maps to the HLA-H gene region on chromosome 6 and leads to abnormally low levels of hepcidin, a key regulator of the entry of iron into the circulatory system in mammals.[188] In these people, excessive iron intake can result in iron overload disorders, known medically as hemochromatosis.[10] Many people have an undiagnosed genetic susceptibility to iron overload, and are not aware of a family history of the problem. For this reason, people should not take iron supplements unless they suffer from iron deficiency and have consulted a doctor. Hemochromatosis is estimated to be the cause of 0.3–0.8% of all metabolic diseases of Caucasians.[189]

Overdoses of ingested iron can cause excessive levels of free iron in the blood. High blood levels of free ferrous iron react with peroxides to produce highly reactive free radicals that can damage DNA, proteins, lipids, and other cellular components. Iron toxicity occurs when the cell contains free iron, which generally occurs when iron levels exceed the availability of transferrin to bind the iron. Damage to the cells of the gastrointestinal tract can also prevent them from regulating iron absorption, leading to further increases in blood levels. Iron typically damages cells in the heart, liver and elsewhere, causing adverse effects that include coma, metabolic acidosis, shock, liver failure, coagulopathy, long-term organ damage, and even death.[190] Humans experience iron toxicity when the iron exceeds 20 milligrams for every kilogram of body mass; 60 milligrams per kilogram is considered a lethal dose.[191] Overconsumption of iron, often the result of children eating large quantities of ferrous sulfate tablets intended for adult consumption, is one of the most common toxicological causes of death in children under six.[191] The Dietary Reference Intake (DRI) sets the Tolerable Upper Intake Level (UL) for adults at 45 mg/day. For children under fourteen years old the UL is 40 mg/day.[192]

The medical management of iron toxicity is complicated, and can include use of a specific chelating agent called deferoxamine to bind and expel excess iron from the body.[190][193][194]

### ADHD

[edit]

Some research has suggested that low thalamic iron levels may play a role in the pathophysiology of ADHD.[195] Some researchers have found that iron supplementation can be effective especially in the inattentive subtype of the disorder.[196]

Some researchers in the 2000s suggested a link between low levels of iron in the blood and ADHD. A 2012 study found no such correlation.[197]

### Cancer

[edit]

The role of iron in cancer defense can be described as a "double-edged sword" because of its pervasive presence in non-pathological processes.[198] People having chemotherapy may develop iron deficiency and anemia, for which intravenous iron therapy is used to restore iron levels.[199] Iron overload, which may occur from high consumption of red meat,[10] may initiate tumor growth and increase susceptibility to cancer onset,[199] particularly for colorectal cancer.[10]

### Marine systems

[edit]

Iron plays an essential role in marine systems and can act as a limiting nutrient for planktonic activity.[200] Because of this, too much of a decrease in iron may lead to a decrease in growth rates in phytoplanktonic organisms such as diatoms.[201] Iron can also be oxidized by marine microbes under conditions that are high in iron and low in oxygen.[202]

Iron can enter marine systems through adjoining rivers and directly from the atmosphere. Once iron enters the ocean, it can be distributed throughout the water column through ocean mixing and through recycling on the cellular level.[203] In the arctic, sea ice plays a major role in the store and distribution of iron in the ocean, depleting oceanic iron as it freezes in the winter and releasing it back into the water when thawing occurs in the summer.[204] The iron cycle can fluctuate the forms of iron from aqueous to particle forms altering the availability of iron to primary producers.[205] Increased light and warmth increases the amount of iron that is in forms that are usable by primary producers.[206]

## See also

[edit]

* Chemistry portal

* Economically important iron deposits include:
* Carajás Mine in the state of Pará, Brazil, is thought to be the largest iron deposit in the world.
* El Mutún in Bolivia, where 10% of the world's accessible iron ore is located.
* Hamersley Basin is the largest iron ore deposit in Australia.
* Kiirunavaara in Sweden, where one of the world's largest deposits of iron ore is located
* The Mesabi Iron Range is the chief iron ore mining district in the United States.
* Iron and steel industry
* Iron cycle
* Iron nanoparticle
* Iron–platinum nanoparticle
* Iron fertilization – proposed fertilization of oceans to stimulate phytoplankton growth
* Iron-oxidizing bacteria
* List of countries by iron production
* Pelletising – process of creation of iron ore pellets
* Rustproof iron
* Steel

## References

[edit]

1. ^ "Standard Atomic Weights: Iron". CIAAW. 1993.
2. ^ Prohaska, Thomas; Irrgeher, Johanna; Benefield, Jacqueline; Böhlke, John K.; Chesson, Lesley A.; Coplen, Tyler B.; Ding, Tiping; Dunn, Philip J. H.; Gröning, Manfred; Holden, Norman E.; Meijer, Harro A. J. (4 May 2022). "Standard atomic weights of the elements 2021 (IUPAC Technical Report)". Pure and Applied Chemistry. doi:10.1515/pac-2019-0603. ISSN 1365-3075.
3. ^ a b c Arblaster, John W. (2018). Selected Values of the Crystallographic Properties of Elements. Materials Park, Ohio: ASM International. ISBN 978-1-62708-155-9.
4. ^ a b c d e Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 28\. ISBN 978-0-08-037941-8.
5. ^ Ram, R. S.; Bernath, P. F. (2003). "Fourier transform emission spectroscopy of the g4Δ–a4Δ system of FeCl". Journal of Molecular Spectroscopy. 221 (2): 261. Bibcode:2003JMoSp.221..261R. doi:10.1016/S0022-2852(03)00225-X.
6. ^ Demazeau, G.; Buffat, B.; Pouchard, M.; Hagenmuller, P. (1982). "Recent developments in the field of high oxidation states of transition elements in oxides stabilization of six-coordinated Iron(V)". Zeitschrift für anorganische und allgemeine Chemie. 491: 60–66\. doi:10.1002/zaac.19824910109.
7. ^ Lu, J.; Jian, J.; Huang, W.; Lin, H.; Li, J; Zhou, M. (2016). "Experimental and theoretical identification of the Fe(VII) oxidation state in FeO4−". Physical Chemistry Chemical Physics. 18 (45): 31125–31131\. Bibcode:2016PCCP...1831125L. doi:10.1039/C6CP06753K. PMID 27812577.
8. ^ Cardarelli, François (2008). Materials Handbook: A Concise Desktop Reference. London: Springer. p. 65\. ISBN 1-84628-668-9.
9. ^ a b Kondev, F. G.; Wang, M.; Huang, W. J.; Naimi, S.; Audi, G. (2021). "The NUBASE2020 evaluation of nuclear properties" (PDF). Chinese Physics C. 45 (3): 030001. doi:10.1088/1674-1137/abddae.
10. ^ a b c d e f g h i j k l m n o p q "Iron". Micronutrient Information Center, Linus Pauling Institute, Oregon State University, Corvallis, Oregon. April 2016. Retrieved 6 March 2018.
11. ^ a b c d e f g h Greenwood & Earnshaw 1997, pp. 1075–79.
12. ^ Tateno S, Hirose K (2010). "The Structure of Iron in Earth's Inner Core". Science. 330 (6002). American Association for the Advancement of Science: 359–361\. Bibcode:2010Sci...330..359T. doi:10.1126/science.1194662. PMID 20947762. S2CID 206528628.
13. ^ a b Chamati, Gaminchev (2014). "Dynamic stability of Fe under high pressure". Journal of Physics. 558 (1). IOP Publishing: 012013. Bibcode:2014JPhCS.558a2013G. doi:10.1088/1742-6596/558/1/012013.
14. ^ Boehler, Reinhard (2000). "High-pressure experiments and the phase diagram of lower mantle and core materials". Reviews of Geophysics. 38 (2). American Geophysical Union: 221–45\. Bibcode:2000RvGeo..38..221B. doi:10.1029/1998RG000053. S2CID 33458168.
15. ^ Stixrude, Lars; Wasserman, Evgeny; Cohen, Ronald E. (10 November 1997). "Composition and temperature of Earth's inner core". Journal of Geophysical Research: Solid Earth. 102 (B11): 24729–39\. Bibcode:1997JGR...10224729S. doi:10.1029/97JB02125.
16. ^ Greenwood & Earnshaw 1997, p. 1116.
17. ^ a b c d e f Greenwood & Earnshaw 1997, pp. 1074–75.
18. ^ Boehler, Reinhard; Ross, M. (2007). "Properties of Rocks and Minerals_High-Pressure Melting". Mineral Physics. Treatise on Geophysics. Vol. 2\. Elsevier. pp. 527–41\. doi:10.1016/B978-044452748-6.00047-X. ISBN 9780444527486.
19. ^ Steinmetz, Charles (1917). "fig. 42". Theory and Calculation of Electric Circuits. McGraw-Hill.
20. ^ a b Cullity; C. D. Graham (2008). Introduction to Magnetic Materials, 2nd. New York: Wiley–IEEE. p. 116\. ISBN 978-0-471-47741-9.
21. ^ a b Bramfitt, B.L.; Benscoter, Arlan O. (2002). "The Iron Carbon Phase Diagram". Metallographer's guide: practice and procedures for irons and steels. ASM International. pp. 24–28\. ISBN 978-0-87170-748-2.
22. ^ Bikit, I.; Krmar, M.; Slivka, J.; Vesković, M.; Čonkić, Lj.; Aničin, I. (1 October 1998). "New results on the double β decay of iron". Physical Review C. 58 (4): 2566–2567\. Bibcode:1998PhRvC..58.2566B. doi:10.1103/PhysRevC.58.2566. ISSN 0556-2813.
23. ^ Rugel, G.; Faestermann, T.; Knie, K.; Korschinek, G.; Poutivtsev, M.; Schumann, D.; Kivel, N.; Günther-Leopold, I.; Weinreich, R.; Wohlmuther, M. (2009). "New Measurement of the 60Fe Half-Life". Physical Review Letters. 103 (7): 072502. Bibcode:2009PhRvL.103g2502R. doi:10.1103/PhysRevLett.103.072502. PMID 19792637.
24. ^ Dauphas, N.; Rouxel, O. (2006). "Mass spectrometry and natural variations of iron isotopes" (PDF). Mass Spectrometry Reviews. 25 (4): 515–50\. Bibcode:2006MSRv...25..515D. doi:10.1002/mas.20078. PMID 16463281. Archived from the original (PDF) on 10 June 2010.
25. ^ Mostefaoui, S.; Lugmair, G.W.; Hoppe, P.; El Goresy, A. (2004). "Evidence for live 60Fe in meteorites". New Astronomy Reviews. 48 (1–4): 155–59\. Bibcode:2004NewAR..48..155M. doi:10.1016/j.newar.2003.11.022.1–4&rft.pages=155-59&rft.date=2004&rft_id=info:doi/10.1016/j.newar.2003.11.022&rft_id=info:bibcode/2004NewAR..48..155M&rft.aulast=Mostefaoui&rft.aufirst=S.&rft.au=Lugmair,+G.W.&rft.au=Hoppe,+P.&rft.au=El+Goresy,+A.&rfr_id=info:sid/en.wikipedia.org:Iron" class="Z3988">
26. ^ Fewell, M. P. (1995). "The atomic nuclide with the highest mean binding energy". American Journal of Physics. 63 (7): 653. Bibcode:1995AmJPh..63..653F. doi:10.1119/1.17828.
27. ^ Fewell, M.P. (1 July 1995). "The atomic nuclide with the highest mean binding energy". American Journal of Physics. 63 (7): 653–658\. Bibcode:1995AmJPh..63..653F. doi:10.1119/1.17828. ISSN 0002-9505.
28. ^ Burbidge, E. Margaret; Burbidge, G.R.; Fowler, William A.; Hoyle, F. (1 October 1957). "Synthesis of the elements in stars". Reviews of Modern Physics. 29 (4): 547–650\. Bibcode:1957RvMP...29..547B. doi:10.1103/RevModPhys.29.547.
29. ^ a b c Greenwood & Earnshaw 1997, p. 12.
30. ^ Woosley, S.; Janka, T. (2006). "The physics of core collapse supernovae". Nature Physics. 1 (3): 147–54\. arXiv:astro-ph/0601261. Bibcode:2005NatPh...1..147W. doi:10.1038/nphys172. S2CID 118974639.
31. ^ McDonald, I.; Sloan, G. C.; Zijlstra, A. A.; Matsunaga, N.; Matsuura, M.; Kraemer, K. E.; Bernard-Salas, J.; Markwick, A. J. (2010). "Rusty Old Stars: A Source of the Missing Interstellar Iron?". The Astrophysical Journal Letters. 717 (2): L92 – L97. arXiv:1005.3489. Bibcode:2010ApJ...717L..92M. doi:10.1088/2041-8205/717/2/L92. S2CID 14437704.
32. ^ Bautista, Manuel A.; Pradhan, Anil K. (1995). "Iron and Nickel Abundances in H~II Regions and Supernova Remnants". Bulletin of the American Astronomical Society. 27: 865. Bibcode:1995AAS...186.3707B.
33. ^ Dyson, Freeman J. (1979). "Time without end: Physics and biology in an open universe". Reviews of Modern Physics. 51 (3): 447–60\. Bibcode:1979RvMP...51..447D. doi:10.1103/RevModPhys.51.447.
34. ^ Aron, Jacob. "Supernova space bullets could have seeded Earth's iron core". New Scientist. Retrieved 2 October 2020.
35. ^ Croswell, Ken. "Iron in the Fire: The Little-Star Supernovae That Could". Scientific American. Retrieved 3 January 2021.
36. ^ Buchwald, V F (1992). "On the Use of Iron by the Eskimos in Greenland". Materials Characterization. 29 (2): 139–176\. doi:10.1016/1044-5803(92)90112-U.
37. ^ Emiliani, Cesare (1992). Planet earth: cosmology, geology, and the evolution of life and environment. Cambridge University Press. p. 152\. Bibcode:1992pecg.book.....E. ISBN 978-0-521-40949-0.
38. ^ Pernet-Fisher, J.; Day, J.M.D.; Howarth, G.H.; Ryabov, V.V.; Taylor, L.A. (2017). "Atmospheric outgassing and native-iron formation during carbonaceous sediment–basalt melt interactions". Earth and Planetary Science Letters. 460: 201–212\. Bibcode:2017E&PSL.460..201P. doi:10.1016/j.epsl.2016.12.022.
39. ^ Stark, Anne M. (20 September 2007) Researchers locate mantle's spin transition zone, leading to clues about earth's structure. Lawrence Livermore National Laboratory
40. ^ Ferropericlase. Mindat.org
41. ^ Murakami, M.; Ohishi Y.; Hirao N.; Hirose K. (2012). "A perovskitic lower mantle inferred from high-pressure, high-temperature sound velocity data". Nature. 485 (7396): 90–94\. Bibcode:2012Natur.485...90M. doi:10.1038/nature11004. PMID 22552097. S2CID 4387193.
42. ^ Sharp, T. (27 November 2014). "Bridgmanite – named at last". Science. 346 (6213): 1057–58\. Bibcode:2014Sci...346.1057S. doi:10.1126/science.1261887. PMID 25430755. S2CID 206563252.
43. ^ Kong, L. T.; Li, J. F.; Shi, Q. W.; Huang, H. J.; Zhao, K. (6 March 2012). "Dynamical stability of iron under high-temperature and high-pressure conditions". EPL. 97 (5): 56004p1–56004p5. Bibcode:2012EL.....9756004K. doi:10.1209/0295-5075/97/56004. S2CID 121861429.
44. ^ Gaminchev, K. G.; Chamati, H. (3 December 2014). "Dynamic stability of Fe under high pressure". J. Phys. 558 (1): 012013(1–7). Bibcode:2014JPhCS.558a2013G. doi:10.1088/1742-6596/558/1/012013.
45. ^ Morgan, John W. & Anders, Edward (1980). "Chemical composition of Earth, Venus, and Mercury". Proc. Natl. Acad. Sci. 77 (12): 6973–77\. Bibcode:1980PNAS...77.6973M. doi:10.1073/pnas.77.12.6973. PMC 350422. PMID 16592930.
46. ^ "Pyrrhotite". Mindat.org. Retrieved 7 July 2009.
47. ^ Klein, Cornelis and Cornelius S. Hurlbut, Jr. (1985) Manual of Mineralogy, Wiley, 20th ed, pp. 278–79 ISBN 0-471-80580-7
48. ^ a b Greenwood & Earnshaw 1997, p. 1071.
49. ^ Lyons, T. W.; Reinhard, C. T. (2009). "Early Earth: Oxygen for heavy-metal fans". Nature. 461 (7261): 179–181\. Bibcode:2009Natur.461..179L. doi:10.1038/461179a. PMID 19741692. S2CID 205049360.
50. ^ Cloud, P. (1973). "Paleoecological Significance of the Banded Iron-Formation". Economic Geology. 68 (7): 1135–43\. Bibcode:1973EcGeo..68.1135C. doi:10.2113/gsecongeo.68.7.1135.
51. ^ Dickinson, Robert E. (1964). Germany: A regional and economic geography (2nd ed.). London: Methuen.
52. ^ Naturwerksteine in Baden-Württemberg. Landesamt für Geologie, Rohstoffe und Bergbau, Baden-Württemberg
53. ^ "Tales From The Riverbank". Minerva Stone Conservation. Archived from the original on 28 September 2015. Retrieved 22 September 2015.
54. ^ Klingelhöfer, G.; Morris, R. V.; Souza, P. A.; Rodionov, D.; Schröder, C. (2007). "Two earth years of Mössbauer studies of the surface of Mars with MIMOS II". Hyperfine Interactions. 170 (1–3): 169–77\. Bibcode:2006HyInt.170..169K. doi:10.1007/s10751-007-9508-5. S2CID 98227499.1–3&rft.pages=169-77&rft.date=2007&rft_id=https://api.semanticscholar.org/CorpusID:98227499#id-name=S2CID&rft_id=info:doi/10.1007/s10751-007-9508-5&rft_id=info:bibcode/2006HyInt.170..169K&rft.aulast=Klingelhöfer&rft.aufirst=G.&rft.au=Morris,+R.+V.&rft.au=Souza,+P.+A.&rft.au=Rodionov,+D.&rft.au=Schröder,+C.&rfr_id=info:sid/en.wikipedia.org:Iron" class="Z3988">
55. ^ Winderlich, R.; Peter, W. (1954). Lehrbuch der Chemie für Höhere Lehranstalten : Einheitsausgabe für Unter- und Oberstufe (in German). Wiesbaden: Vieweg+Teubner Verlag. p. 75\. ISBN 978-3-663-04370-6. OCLC 913701506. `{{cite book}}`: ISBN / Date incompatibility (help)
56. ^ Bertau, Martin (2013). Industrielle Anorganische Chemie (in German). Weinheim: Wiley-VCH. p. 696\. ISBN 978-3-527-64956-3. OCLC 855858511.
57. ^ Metal Stocks in Society: Scientific synthesis, 2010, International Resource Panel, UNEP
58. ^ Stoll, Heather (17 February 2020). "30 years of the iron hypothesis of ice ages". Nature. 578 (7795). Springer Science and Business Media LLC: 370–371\. Bibcode:2020Natur.578..370S. doi:10.1038/d41586-020-00393-x. ISSN 0028-0836. PMID 32066927. S2CID 211139074.
59. ^ Greenwood & Earnshaw 1997, p. 905.
60. ^ a b Greenwood & Earnshaw 1997, p. 1070.
61. ^ Lu, Jun-Bo; Jian, Jiwen; Huang, Wei; Lin, Hailu; Li, Jun; Zhou, Mingfei (16 November 2016). "Experimental and theoretical identification of the Fe(VII) oxidation state in FeO4−". Phys. Chem. Chem. Phys. 18 (45): 31125–31131\. Bibcode:2016PCCP...1831125L. doi:10.1039/c6cp06753k. PMID 27812577.
62. ^ Nam, Wonwoo (2007). "High-Valent Iron(IV)–Oxo Complexes of Heme and Non-Heme Ligands in Oxygenation Reactions" (PDF). Accounts of Chemical Research. 40 (7): 522–531\. doi:10.1021/ar700027f. PMID 17469792. Archived from the original (PDF) on 15 June 2021. Retrieved 22 February 2022.
63. ^ a b c d e f Holleman, Arnold F.; Wiberg, Egon; Wiberg, Nils (1985). "Iron". Lehrbuch der Anorganischen Chemie (in German) (91–100 ed.). Walter de Gruyter. pp. 1125–46\. ISBN 3-11-007511-3.
64. ^ Reiff, William Michael; Long, Gary J. (1984). "Mössbauer Spectroscopy and the Coordination Chemistry of Iron". Mössbauer spectroscopy applied to inorganic chemistry. Springer. pp. 245–83\. ISBN 978-0-306-41647-7.
65. ^ Ware, Mike (1999). "An introduction in monochrome". Cyanotype: the history, science and art of photographic printing in Prussian blue. NMSI Trading Ltd. pp. 11–19\. ISBN 978-1-900747-07-3.
66. ^ Gmelin, Leopold (1852). "Mercury and Iron". Hand-book of chemistry. Vol. 6\. Cavendish Society. pp. 128–29.
67. ^ a b c Greenwood & Earnshaw 1997, p. 1079.
68. ^ a b c d Greenwood & Earnshaw 1997, pp. 1082–84.
69. ^ Siegfried Pohl, Ulrich Bierbach, Wolfgang Saak; "FeI3SC(NMe2)2, a Neutral Thiourea Complex of Iron(III) Iodide", Angewandte Chemie International Edition in English (1989) 28 (6), 776–777. https://doi.org/10.1002/anie.198907761
70. ^ Nicholas A. Barnes, Stephen M.Godfrey, Nicholas Ho, Charles A.McAuliffe, Robin G.Pritchard; "Facile synthesis of a rare example of an iron(III) iodide complex, [FeI3(AsMe3)2], from the reaction of Me3AsI2 with unactivated iron powder", Polyhedron (2013) 55, 67–72. https://doi.org/10.1016/j.poly.2013.02.066
71. ^ a b c d Greenwood & Earnshaw 1997, pp. 1088–91.
72. ^ a b Greenwood & Earnshaw 1997, pp. 1091–97.
73. ^ Clausen, C.A.; Good, M.L. (1968). "Stabilization of the hexachloroferrate(III) anion by the methylammonium cation". Inorganic Chemistry. 7 (12): 2662–63\. doi:10.1021/ic50070a047.
74. ^ James, B.D.; Bakalova, M.; Lieseganga, J.; Reiff, W.M.; Hockless, D.C.R.; Skelton, B.W.; White, A.H. (1996). "The hexachloroferrate(III) anion stabilized in hydrogen bonded packing arrangements. A comparison of the X-ray crystal structures and low temperature magnetism of tetrakis(methylammonium) hexachloroferrate(III) chloride (I) and tetrakis(hexamethylenediammonium) hexachloroferrate(III) tetrachloroferrate(III) tetrachloride (II)". Inorganica Chimica Acta. 247 (2): 169–74\. doi:10.1016/0020-1693(95)04955-X.
75. ^ Giannoccaro, P.; Sacco, A. (1977). "Bis[Ethylenebis(Diphenylphosphine)]-Hydridoiron Complexes". Inorganic Syntheses. Vol. 17\. pp. 69–72\. doi:10.1002/9780470132487.ch19. ISBN 978-0-470-13248-7.
76. ^ Lee, J.; Jung, G.; Lee, S.W. (1998). "Structure of trans-chlorohydridobis(diphenylphosphinoethane)iron(II)". Bull. Korean Chem. Soc. 19 (2): 267–69\. doi:10.1007/BF02698412. S2CID 35665289.
77. ^ Echigo, Takuya; Kimata, Mitsuyoshi (2008). "Single-crystal X-ray diffraction and spectroscopic studies on humboldtine and lindbergite: weak Jahn–Teller effect of Fe2+ ion". Phys. Chem. Miner. 35 (8): 467–75\. Bibcode:2008PCM....35..467E. doi:10.1007/s00269-008-0241-7. S2CID 98739882.
78. ^ Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. pp. 1282–86\. ISBN 978-0-08-022057-4..
79. ^ Kealy, T.J.; Pauson, P.L. (1951). "A New Type of Organo-Iron Compound". Nature. 168 (4285): 1039–40\. Bibcode:1951Natur.168.1039K. doi:10.1038/1681039b0. S2CID 4181383.
80. ^ Miller, S. A.; Tebboth, J. A.; Tremaine, J. F. (1952). "114. Dicyclopentadienyliron". J. Chem. Soc.: 632–635\. doi:10.1039/JR9520000632.
81. ^ Wilkinson, G.; Rosenblum, M.; Whiting, M. C.; Woodward, R. B. (1952). "The Structure of Iron Bis-Cyclopentadienyl". J. Am. Chem. Soc. 74 (8): 2125–2126\. Bibcode:1952JAChS..74.2125W. doi:10.1021/ja01128a527.
82. ^ Okuda, Jun (28 December 2016). "Ferrocene – 65 Years After". European Journal of Inorganic Chemistry. 2017 (2): 217–219\. doi:10.1002/ejic.201601323. ISSN 1434-1948.
83. ^ Greenwood & Earnshaw 1997, p. 1104.
84. ^ Bullock, R.M. (11 September 2007). "An Iron Catalyst for Ketone Hydrogenations under Mild Conditions". Angew. Chem. Int. Ed. 46 (39): 7360–63\. Bibcode:2007ACIE...46.7360B. doi:10.1002/anie.200703053. PMID 17847139.
85. ^ Weeks 1968, p. 4.
86. ^ a b Weeks 1968, p. 29.
87. ^ a b c Weeks 1968, p. 31.
88. ^ Bjorkman, Judith Kingston (1973). "Meteors and Meteorites in the ancient Near East". Meteoritics. 8 (2): 91–132\. Bibcode:1973Metic...8...91B. doi:10.1111/j.1945-5100.1973.tb00146.x.
89. ^ Comelli, Daniela; d'Orazio, Massimo; Folco, Luigi; El-Halwagy, Mahmud; Frizzi, Tommaso; Alberti, Roberto; Capogrosso, Valentina; Elnaggar, Abdelrazek; Hassan, Hala; Nevin, Austin; Porcelli, Franco; Rashed, Mohamed G; Valentini, Gianluca (2016). "The meteoritic origin of Tutankhamun's iron dagger blade". Meteoritics & Planetary Science. 51 (7): 1301–09\. Bibcode:2016M&PS...51.1301C. doi:10.1111/maps.12664. hdl:11568/794614.
90. ^ Walsh, Declan (2 June 2016). "King Tut's Dagger Made of 'Iron From the Sky,' Researchers Say". The New York Times. Archived from the original on 3 January 2022. Retrieved 4 June 2016. "the blade's composition of iron, nickel and cobalt was an approximate match for a meteorite that landed in northern Egypt. The result "strongly suggests an extraterrestrial origin""
91. ^ Ure, Andrew (1843). Technisches wörterbuch oder Handbuch der Gewerbskunde ... : Bearb. nach Dr. Andrew Ure's Dictionary of arts, manufactures and mines (in German). G. Haase. p. 492.
92. ^ a b c d Weeks 1968, p. 32.
93. ^ McNutt, Paula (1990 1). The Forging of Israel: Iron Technology, Symbolism and Tradition in Ancient Society. A&C Black.
94. ^ Tewari, Rakesh. "The origins of Iron Working in India: New evidence from the Central Ganga plain and the Eastern Vindhyas" (PDF). State Archaeological Department. Retrieved 23 May 2010.
95. ^ Photos, E. (1989). "The Question of Meteoritic versus Smelted Nickel-Rich Iron: Archaeological Evidence and Experimental Results". World Archaeology. 20 (3). Taylor & Francis, Ltd.: 403–21\. doi:10.1080/00438243.1989.9980081. JSTOR 124562.
96. ^ Muhly, James D. (2003). "Metalworking/Mining in the Levant". In Lake, Richard Winona (ed.). Near Eastern Archaeology IN: Eisenbrauns. Vol. 180\. pp. 174–83.
97. ^ Witzel, Michael (2001), "Autochthonous Aryans? The Evidence from Old Indian and Iranian Texts", in Electronic Journal of Vedic Studies (EJVS) 7-3, pp. 1–93
98. ^ Weeks, p. 33, quoting Cline, Walter (1937) "Mining and Metallurgy in Negro Africa", George Banta Publishing Co., Menasha, Wis., pp. 17–23.
99. ^ Riederer, Josef; Wartke, Ralf-B. (2009) "Iron", Cancik, Hubert; Schneider, Helmuth (eds.): Brill's New Pauly, Brill.
100. ^ Sawyer, Ralph D. and Sawyer, Mei-chün (1993). The Seven Military Classics of Ancient China. Boulder: Westview. ISBN 0-465-00304-4. p. 10.
101. ^ Pigott, Vincent C. (1999). The Archaeometallurgy of the Asian Old World. Philadelphia: University of Pennsylvania Museum of Archaeology and Anthropology. ISBN 0-924171-34-0, p. 8.
102. ^ Golas, Peter J. (1999). Science and Civilisation in China: Volume 5, Chemistry and Chemical Technology, Part 13, Mining. Cambridge University Press. p. 152\. ISBN 978-0-521-58000-7. "earliest blast furnace discovered in China from about the first century AD"
103. ^ Pigott, Vincent C. (1999). The Archaeometallurgy of the Asian Old World. Philadelphia: University of Pennsylvania Museum of Archaeology and Anthropology. ISBN 0-924171-34-0, p. 191.
104. ^ The Coming of the Ages of Steel. Brill Archive. 1961. p. 54.
105. ^ Mott, R.A (2014). "Dry and Wet Puddling". Transactions of the Newcomen Society. 49: 156–57\. doi:10.1179/tns.1977.011.
106. ^ Wagner, Donald B. (2003). "Chinese blast furnaces from the 10th to the 14th century" (PDF). Historical Metallurgy. 37 (1): 25–37\. Archived from the original (PDF) on 7 January 2018. Retrieved 7 January 2018. originally published in Wagner, Donald B. (2001). "Chinese blast furnaces from the 10th to the 14th century". West Asian Science, Technology, and Medicine. 18: 41–74\. doi:10.1163/26669323-01801008.
107. ^ Giannichedda, Enrico (2007): "Metal production in Late Antiquity", in Technology in Transition AD 300–650 Lavan, L.; Zanini, E. and Sarantis, A.(eds.), Brill, Leiden; ISBN 90-04-16549-5, p. 200.
108. ^ a b c d e f g Biddle, Verne; Parker, Gregory. Chemistry, Precision and Design. A Beka Book, Inc.
109. ^ Wagner, Donald B. (1993). Iron and Steel in Ancient China. Brill. pp. 335–340\. ISBN 978-90-04-09632-5.
110. ^ a b c d Greenwood & Earnshaw 1997, p. 1072.
111. ^ Schivelbusch, G. (1986) The Railway Journey: Industrialization and Perception of Time and Space in the 19th Century. Oxford: Berg.
112. ^ Spoerl, Joseph S. A Brief History of Iron and Steel Production Archived 2 June 2010 at the Wayback Machine. Saint Anselm College
113. ^ Enghag, Per (8 January 2008). Encyclopedia of the Elements: Technical Data – History – Processing – Applications. John Wiley & Sons. pp. 190–91\. ISBN 978-3-527-61234-5.
114. ^ Whitaker, Robert D (1975). "An historical note on the conservation of mass". Journal of Chemical Education. 52 (10): 658. Bibcode:1975JChEd..52..658W. doi:10.1021/ed052p658.
115. ^ Fontenrose, Joseph (1974). "Work, Justice, and Hesiod's Five Ages". Classical Philology. 69 (1): 1–16\. doi:10.1086/366027. JSTOR 268960. S2CID 161808359.
116. ^ Schmidt, Eva (1981) Der preußische Eisenkunstguss. (Art of Prussian cast iron) Technik, Geschichte, Werke, Künstler. Verlag Mann, Berlin, ISBN 3-7861-1130-8
117. ^ Lux, H. (1963) "Metallic Iron" in Handbook of Preparative Inorganic Chemistry, 2nd Ed. G. Brauer (ed.), Academic Press, NY. Vol. 2. pp. 1490–91.
118. ^ Steel Statistical Yearbook 2010. World Steel Association
119. ^ a b c d e f g Greenwood & Earnshaw 1997, p. 1073.
120. ^ Wang, Peng; Ryberg, Morten; Yang, Yi; Feng, Kuishuang; Kara, Sami; Hauschild, Michael; Chen, Wei-Qiang (6 April 2021). "Efficiency stagnation in global steel production urges joint supply- and demand-side mitigation efforts". Nature Communications. 12 (1): 2066. Bibcode:2021NatCo..12.2066W. doi:10.1038/s41467-021-22245-6. ISSN 2041-1723. PMC 8024266. PMID 33824307.
121. ^ Song Yingxing (1637): The Tiangong Kaiwu encyclopedia.
122. ^ Verhoeven, J.D. (1975) Fundamentals of Physical Metallurgy, Wiley, New York, p. 326
123. ^ Allanore, Antoine; Yin, Lan; Sadoway, Donald R. (2013). "A new anode material for oxygen evolution in molten oxide electrolysis". Nature. 497 (7449): 353–356\. Bibcode:2013Natur.497..353A. doi:10.1038/nature12134. hdl:1721.1/82073. ISSN 0028-0836. PMID 23657254.
124. ^ Wiencke, Jan; Lavelaine, Hervé; Panteix, Pierre-Jean; Petitjean, Carine; Rapin, Christophe (2018). "Electrolysis of iron in a molten oxide electrolyte". Journal of Applied Electrochemistry. 48 (1): 115–126\. doi:10.1007/s10800-017-1143-5. ISSN 0021-891X.
125. ^ Fan, Zhiyuan; Friedmann, S. Julio (2021). "Low-carbon production of iron and steel: Technology options, economic assessment, and policy". Joule. 5 (4): 829–862\. Bibcode:2021Joule...5..829F. doi:10.1016/j.joule.2021.02.018.
126. ^ Gallucci, Maria (7 September 2023). "Boston Metal gets big funding boost to make green steel". Canary Media. Rocky Mountain Institute. Retrieved 11 March 2024.
127. ^ a b Kohl, Walter H. (1995). Handbook of materials and techniques for vacuum devices. Springer. pp. 164–67\. ISBN 1-56396-387-6.
128. ^ a b Kuhn, Howard; Medlin, Dana; et al., eds. (2000). ASM Handbook – Mechanical Testing and Evaluation (PDF). Vol. 8\. ASM International. p. 275\. ISBN 0-87170-389-0. Archived from the original (PDF) on 9 February 2019. Retrieved 22 February 2022.
129. ^ Greenwood & Earnshaw 1997, pp. 1070–71.
130. ^ "Hardness Conversion Chart". Maryland Metrics. Archived from the original on 18 June 2015. Retrieved 23 May 2010.
131. ^ Takaji, Kusakawa; Toshikatsu, Otani (1964). "Properties of Various Pure Irons: Study on pure iron I". Tetsu-to-Hagane. 50 (1): 42–47\. doi:10.2355/tetsutohagane1955.50.1_42.
132. ^ Raghavan, V. (2004). Materials Science and Engineering. PHI Learning Pvt. Ltd. p. 218\. ISBN 81-203-2455-2.
133. ^ Martin, John Wilson (2007). Concise encyclopedia of the structure of materials. Elsevier. p. 183\. ISBN 978-0-08-045127-5.
134. ^ a b Camp, James McIntyre; Francis, Charles Blaine (1920). The Making, Shaping and Treating of Steel. Pittsburgh: Carnegie Steel Company. pp. 173–74\. ISBN 1-147-64423-3. `{{cite book}}`: ISBN / Date incompatibility (help)
135. ^ a b Smith, William F.; Hashemi, Javad (2006), Foundations of Materials Science and Engineering (4th ed.), McGraw-Hill, p. 431, ISBN 0-07-295358-6.
136. ^ a b "Classification of Carbon and Low-Alloy Steels". Archived from the original on 2 January 2011. Retrieved 5 January 2008.
137. ^ "HSLA Steel". 15 November 2002. Archived from the original on 30 December 2009. Retrieved 11 October 2008.
138. ^ Oberg, E.; et al. (1996). Machinery's Handbook (25th ed.). New York: Industrial Press. pp. 440–42\. Bibcode:1984msh..book.....R.
139. ^ Rokni, Sayed H.; Cossairt, J. Donald; Liu, James C. (January 2008). "Radiation Shielding at High-Energy Electron and Proton Accelerators" (PDF). Retrieved 6 August 2016.
140. ^ a b c Greenwood & Earnshaw 1997, p. 1076.
141. ^ Fürstner, Alois (2016). "Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes to Make This Base Metal a Multitasking Champion". ACS Central Science. 2 (11): 778–789\. doi:10.1021/acscentsci.6b00272. PMC 5140022. PMID 27981231.
142. ^ Bullock, R. Morris; et al. (2020). "Using nature's blueprint to expand catalysis with Earth-abundant metals". Science. 369 (6505): eabc3183. doi:10.1126/science.abc3183. PMC 7875315. PMID 32792370.
143. ^ Kolasinski, Kurt W. (2002). "Where are Heterogenous Reactions Important". Surface science: foundations of catalysis and nanoscience. John Wiley and Sons. pp. 15–16\. ISBN 978-0-471-49244-3.
144. ^ McKetta, John J. (1989). "Nitrobenzene and Nitrotoluene". Encyclopedia of Chemical Processing and Design: Volume 31 – Natural Gas Liquids and Natural Gasoline to Offshore Process Piping: High Performance Alloys. CRC Press. pp. 166–67\. ISBN 978-0-8247-2481-8.
145. ^ a b c Wildermuth, Egon; Stark, Hans; Friedrich, Gabriele; Ebenhöch, Franz Ludwig; Kühborth, Brigitte; Silver, Jack; Rituper, Rafael (2000). "Iron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a14_591. ISBN 3-527-30673-0.
146. ^ Stroud, Robert (1933). Diseases of Canaries. Canary Publishers Company. p. 203\. ISBN 978-1-4465-4656-7. `{{cite book}}`: ISBN / Date incompatibility (help)
147. ^ World Health Organization (2021). World Health Organization model list of essential medicines: 22nd list (2021). Geneva: World Health Organization. hdl:10665/345533. WHO/MHP/HPS/EML/2021.02.
148. ^ Dlouhy, Adrienne C.; Outten, Caryn E. (2013). "The Iron Metallome in Eukaryotic Organisms". In Banci, Lucia (ed.). Metallomics and the Cell. Metal Ions in Life Sciences. Vol. 12\. Springer. pp. 241–78\. doi:10.1007/978-94-007-5561-1_8. ISBN 978-94-007-5560-4. PMC 3924584. PMID 23595675. electronic-book ISBN 978-94-007-5561-1
149. ^ Yee, Gereon M.; Tolman, William B. (2015). "Transition Metal Complexes and the Activation of Dioxygen". In Peter M.H. Kroneck; Martha E. Sosa Torres (eds.). Sustaining Life on Planet Earth: Metalloenzymes Mastering Dioxygen and Other Chewy Gases. Metal Ions in Life Sciences. Vol. 15\. Springer. pp. 131–204\. doi:10.1007/978-3-319-12415-5_5. ISBN 978-3-319-12414-8. PMID 25707468.
150. ^ a b c d e f g h i j k l m n o p Greenwood & Earnshaw 1997, pp. 1098–104.
151. ^ Lippard, S.J.; Berg, J.M. (1994). Principles of Bioinorganic Chemistry. Mill Valley: University Science Books. ISBN 0-935702-73-3.
152. ^ Kikuchi, G.; Yoshida, T.; Noguchi, M. (2005). "Heme oxygenase and heme degradation". Biochemical and Biophysical Research Communications. 338 (1): 558–67\. Bibcode:2005BBRC..338..558K. doi:10.1016/j.bbrc.2005.08.020. PMID 16115609.
153. ^ "Contents of Volumes in the Metal Ions in Life Sciences Series". Metals, Microbes, and Minerals - the Biogeochemical Side of Life. De Gruyter. 2021. pp. xxv–xlvi. doi:10.1515/9783110589771-006. ISBN 9783110589771. S2CID 196704759.
154. ^ Neilands, J.B. (1995). "Siderophores: structure and function of microbial iron transport compounds". The Journal of Biological Chemistry. 270 (45): 26723–26\. doi:10.1074/jbc.270.45.26723. PMID 7592901.
155. ^ Neilands, J.B. (1981). "Microbial Iron Compounds". Annual Review of Biochemistry. 50 (1): 715–31\. doi:10.1146/annurev.bi.50.070181.003435. PMID 6455965.
156. ^ Boukhalfa, Hakim; Crumbliss, Alvin L. (2002). "Chemical aspects of siderophore mediated iron transport". BioMetals. 15 (4): 325–39\. doi:10.1023/A:1020218608266. PMID 12405526. S2CID 19697776.
157. ^ Nanami, M.; Ookawara, T.; Otaki, Y.; Ito, K.; Moriguchi, R.; Miyagawa, K.; Hasuike, Y.; Izumi, M.; Eguchi, H.; Suzuki, K.; Nakanishi, T. (2005). "Tumor necrosis factor-α-induced iron sequestration and oxidative stress in human endothelial cells". Arteriosclerosis, Thrombosis, and Vascular Biology. 25 (12): 2495–501\. doi:10.1161/01.ATV.0000190610.63878.20. PMID 16224057.
158. ^ Rouault, Tracey A. (2003). "How Mammals Acquire and Distribute Iron Needed for Oxygen-Based Metabolism". PLOS Biology. 1 (3): e9. doi:10.1371/journal.pbio.0000079. PMC 300689. PMID 14691550.
159. ^ Boon EM, Downs A, Marcey D. "Proposed Mechanism of Catalase". Catalase: H2O2: H2O2 Oxidoreductase: Catalase Structural Tutorial. Retrieved 11 February 2007.
160. ^ Boyington JC, Gaffney BJ, Amzel LM (1993). "The three-dimensional structure of an arachidonic acid 15-lipoxygenase". Science. 260 (5113): 1482–86\. Bibcode:1993Sci...260.1482B. doi:10.1126/science.8502991. PMID 8502991.
161. ^ Gray, N.K.; Hentze, M.W. (August 1994). "Iron regulatory protein prevents binding of the 43S translation pre-initiation complex to ferritin and eALAS mRNAs". EMBO J. 13 (16): 3882–91\. doi:10.1002/j.1460-2075.1994.tb06699.x. PMC 395301. PMID 8070415.
162. ^ Gregory B. Vásquez; Xinhua Ji; Clara Fronticelli; Gary L. Gilliland (1998). "Human Carboxyhemoglobin at 2.2 Å Resolution: Structure and Solvent Comparisons of R-State, R2-State and T-State Hemoglobins". Acta Crystallogr. D. 54 (3): 355–66\. Bibcode:1998AcCrD..54..355V. doi:10.1107/S0907444997012250. PMID 9761903.
163. ^ Sanderson, K (2017). "Mussels' iron grip inspires strong and stretchy polymer". Chemical & Engineering News. 95 (44). American Chemical Society: 8. doi:10.1021/cen-09544-notw3. Retrieved 2 November 2017.
164. ^ Food Standards Agency – Eat well, be well – Iron deficiency Archived 8 August 2006 at the Wayback Machine. Eatwell.gov.uk (5 March 2012). Retrieved on 27 June 2012.
165. ^ Hoppe, M.; Hulthén, L.; Hallberg, L. (2005). "The relative bioavailability in humans of elemental iron powders for use in food fortification". European Journal of Nutrition. 45 (1): 37–44\. doi:10.1007/s00394-005-0560-0. PMID 15864409. S2CID 42983904.
166. ^ Pineda, O.; Ashmead, H. D. (2001). "Effectiveness of treatment of iron-deficiency anemia in infants and young children with ferrous bis-glycinate chelate". Nutrition. 17 (5): 381–4\. doi:10.1016/S0899-9007(01)00519-6. PMID 11377130.
167. ^ Ashmead, H. DeWayne (1989). Conversations on Chelation and Mineral Nutrition. Keats Publishing. ISBN 0-87983-501-X.
168. ^ Institute of Medicine (US) Panel on Micronutrients (2001). "Iron" (PDF). Dietary Reference Intakes for Vitamin A, Vitamin K, Arsenic, Boron, Chromium, Copper, Iodine, Iron, Manganese, Molybdenum, Nickel, Silicon, Vanadium, and Iron. National Academy Press. pp. 290–393\. ISBN 0-309-07279-4. PMID 25057538. Archived from the original (PDF) on 9 September 2017. Retrieved 9 March 2017.
169. ^ "Overview on Dietary Reference Values for the EU population as derived by the EFSA Panel on Dietetic Products, Nutrition and Allergies" (PDF). European Food Safety Authority. 2017.
170. ^ "Tolerable Upper Intake Levels For Vitamins And Minerals" (PDF). European Food Safety Authority. 2006.
171. ^ "Iron Deficiency Anemia". MediResource. Archived from the original on 16 December 2008. Retrieved 17 December 2008.
172. ^ Milman, N. (1996). "Serum ferritin in Danes: studies of iron status from infancy to old age, during blood donation and pregnancy". International Journal of Hematology. 63 (2): 103–35\. doi:10.1016/0925-5710(95)00426-2. PMID 8867722.
173. ^ "Federal Register May 27, 2016 Food Labeling: Revision of the Nutrition and Supplement Facts Labels. FR page 33982" (PDF).
174. ^ "Daily Value Reference of the Dietary Supplement Label Database (DSLD)". Dietary Supplement Label Database (DSLD). Archived from the original on 7 April 2020. Retrieved 16 May 2020.
175. ^ Centers for Disease Control and Prevention (2002). "Iron deficiency – United States, 1999–2000". MMWR. 51 (40): 897–99\. PMID 12418542.
176. ^ Hider, Robert C.; Kong, Xiaole (2013). "Chapter 8. Iron: Effect of Overload and Deficiency". In Astrid Sigel, Helmut Sigel and Roland K.O. Sigel (ed.). Interrelations between Essential Metal Ions and Human Diseases. Metal Ions in Life Sciences. Vol. 13\. Springer. pp. 229–94\. doi:10.1007/978-94-007-7500-8_8. ISBN 978-94-007-7499-5. PMID 24470094.
177. ^ Dlouhy, Adrienne C.; Outten, Caryn E. (2013). "The Iron Metallome in Eukaryotic Organisms". In Banci, Lucia (ed.). Metallomics and the Cell. Metal Ions in Life Sciences. Vol. 12\. Springer. pp. 241–78\. doi:10.1007/978-94-007-5561-1_8. ISBN 978-94-007-5560-4. PMC 3924584. PMID 23595675. electronic-book ISBN 978-94-007-5561-1
178. ^ CDC Centers for Disease Control and Prevention (3 April 1998). "Recommendations to Prevent and Control Iron Deficiency in the United States". Morbidity and Mortality Weekly Report. 47 (RR3): 1. Retrieved 12 August 2014.
179. ^ Centers for Disease Control and Prevention. "Iron and Iron Deficiency". Retrieved 12 August 2014.
180. ^ Youdim, M. B.; Ben-Shachar, D.; Yehuda, S. (September 1989). "Putative biological mechanisms of the effect of iron deficiency on brain biochemistry and behavior". The American Journal of Clinical Nutrition. 50 (3 Suppl): 607–615, discussion 615–617. doi:10.1093/ajcn/50.3.607. ISSN 0002-9165. PMID 2773840.
181. ^ Erikson, K. M.; Pinero, D. J.; Connor, J. R.; Beard, J. L. (October 1997). "Regional brain iron, ferritin and transferrin concentrations during iron deficiency and iron repletion in developing rats". The Journal of Nutrition. 127 (10): 2030–2038\. doi:10.1093/jn/127.10.2030. ISSN 0022-3166. PMID 9311961.
182. ^ Unger, Erica L.; Bianco, Laura E.; Jones, Byron C.; Allen, Richard P.; Earley, Christopher J. (November 2014). "Low brain iron effects and reversibility on striatal dopamine dynamics". Experimental Neurology. 261: 462–468\. doi:10.1016/j.expneurol.2014.06.023. PMC 4318655. PMID 24999026.
183. ^ Ward, Roberta J.; Zucca, Fabio A.; Duyn, Jeff H.; Crichton, Robert R.; Zecca, Luigi (October 2014). "The role of iron in brain ageing and neurodegenerative disorders". The Lancet. Neurology. 13 (10): 1045–1060\. doi:10.1016/S1474-4422(14)70117-6. ISSN 1474-4465. PMC 5672917. PMID 25231526.
184. ^ Pino, Jessica M. V.; da Luz, Marcio H. M.; Antunes, Hanna K. M.; Giampá, Sara Q. de Campos; Martins, Vilma R.; Lee, Kil S. (17 May 2017). "Iron-Restricted Diet Affects Brain Ferritin Levels, Dopamine Metabolism and Cellular Prion Protein in a Region-Specific Manner". Frontiers in Molecular Neuroscience. 10: 145. doi:10.3389/fnmol.2017.00145. ISSN 1662-5099. PMC 5434142. PMID 28567002.
185. ^ Beard, John; Erikson, Keith M.; Jones, Byron C. (1 April 2003). "Neonatal Iron Deficiency Results in Irreversible Changes in Dopamine Function in Rats". The Journal of Nutrition. 133 (4): 1174–1179\. doi:10.1093/jn/133.4.1174. ISSN 0022-3166. PMID 12672939.
186. ^ Dominic J. Hare; Kay L. Double (April 2016). "Iron and dopamine: a toxic couple". Brain. 139 (4): 1026–1035\. doi:10.1093/brain/aww022. PMID 26962053.
187. ^ Ramzi S. Cotran; Vinay Kumar; Tucker Collins; Stanley Leonard Robbins (1999). Robbins pathologic basis of disease. Saunders. ISBN 978-0-7216-7335-6. Retrieved 27 June 2012.
188. ^ Ganz T (August 2003). "Hepcidin, a key regulator of iron metabolism and mediator of anemia of inflammation". Blood. 102 (3): 783–8\. doi:10.1182/blood-2003-03-0672. PMID 12663437. S2CID 28909635.
189. ^ Durupt, S.; Durieu, I.; Nové-Josserand, R.; Bencharif, L.; Rousset, H.; Vital Durand, D. (2000). "Hereditary hemochromatosis". Rev Méd Interne. 21 (11): 961–71\. doi:10.1016/S0248-8663(00)00252-6. PMID 11109593.
190. ^ a b Cheney, K.; Gumbiner, C.; Benson, B.; Tenenbein, M. (1995). "Survival after a severe iron poisoning treated with intermittent infusions of deferoxamine". J Toxicol Clin Toxicol. 33 (1): 61–66\. doi:10.3109/15563659509020217. PMID 7837315.
191. ^ a b "Toxicity, Iron". Medscape. Retrieved 23 May 2010.
192. ^ Dietary Reference Intakes (DRIs): Recommended Intakes for Individuals (PDF), Food and Nutrition Board, Institute of Medicine, National Academies, 2004, archived from the original (PDF) on 14 March 2013, retrieved 9 June 2009
193. ^ Tenenbein, M. (1996). "Benefits of parenteral deferoxamine for acute iron poisoning". J Toxicol Clin Toxicol. 34 (5): 485–89\. doi:10.3109/15563659609028005. PMID 8800185.
194. ^ Wu H, Wu T, Xu X, Wang J, Wang J (May 2011). "Iron toxicity in mice with collagenase-induced intracerebral hemorrhage". J Cereb Blood Flow Metab. 31 (5): 1243–50\. doi:10.1038/jcbfm.2010.209. PMC 3099628. PMID 21102602.
195. ^ Robberecht, Harry; et al. (2020). "Magnesium, Iron, Zinc, Copper and Selenium Status in Attention-Deficit/Hyperactivity Disorder (ADHD)". Molecules. 25 (19): 4440. doi:10.3390/molecules25194440. PMC 7583976. PMID 32992575.
196. ^ Soto-Insuga, V; et al. (2013). "[Role of iron in the treatment of attention deficit-hyperactivity disorder]". An Pediatr (Barc). 79 (4): 230–235\. doi:10.1016/j.anpedi.2013.02.008. PMID 23582950.
197. ^ Donfrancesco, Renato; Parisi, Pasquale; Vanacore, Nicola; Martines, Francesca; Sargentini, Vittorio; Cortese, Samuele (May 2013). "Iron and ADHD: Time to Move Beyond Serum Ferritin Levels". Journal of Attention Disorders. 17 (4): 347–357\. doi:10.1177/1087054711430712. ISSN 1087-0547. PMID 22290693. S2CID 22445593.
198. ^ Thévenod, Frank (2018). "Chapter 15. Iron and Its Role in Cancer Defense: A Double-Edged Sword". In Sigel, Astrid; Sigel, Helmut; Freisinger, Eva; Sigel, Roland K. O. (eds.). Metallo-Drugs: Development and Action of Anticancer Agents. Metal Ions in Life Sciences 18. Vol. 18\. Berlin: de Gruyter GmbH. pp. 437–67\. doi:10.1515/9783110470734-021. PMID 29394034.
199. ^ a b Beguin, Y; Aapro, M; Ludwig, H; Mizzen, L; Osterborg, A (2014). "Epidemiological and nonclinical studies investigating effects of iron in carcinogenesis--a critical review". Critical Reviews in Oncology/Hematology. 89 (1): 1–15\. doi:10.1016/j.critrevonc.2013.10.008. PMID 24275533.
200. ^ Morel, F.M.M.; Hudson, R.J.M.; Price, N.M. (1991). "Limitation of productivity by trace metals in the sea". Limnology and Oceanography. 36 (8): 1742–1755\. Bibcode:1991LimOc..36.1742M. doi:10.4319/lo.1991.36.8.1742.
201. ^ Brezezinski, M.A.; Baines, S.B.; Balch, W.M.; Beucher, C.P.; Chai, F.; Dugdale, R.C.; Krause, J.W.; Landry, M.R.; Marchi, A.; Measures, C.I.; Nelson, D.M.; Parker, A.E.; Poulton, A.J.; Selph, K.E.; Strutton, P.G.; Taylor, A.G.; Twining, B.S. (2011). "Co-limitation of diatoms by iron and silicic acid in the equatorial Pacific". Deep-Sea Research Part II: Topical Studies in Oceanography. 58 (3–4): 493–511\. Bibcode:2011DSRII..58..493B. doi:10.1016/j.dsr2.2010.08.005.3–4&rft.pages=493-511&rft.date=2011&rft_id=info:doi/10.1016/j.dsr2.2010.08.005&rft_id=info:bibcode/2011DSRII..58..493B&rft.aulast=Brezezinski&rft.aufirst=M.A.&rft.au=Baines,+S.B.&rft.au=Balch,+W.M.&rft.au=Beucher,+C.P.&rft.au=Chai,+F.&rft.au=Dugdale,+R.C.&rft.au=Krause,+J.W.&rft.au=Landry,+M.R.&rft.au=Marchi,+A.&rft.au=Measures,+C.I.&rft.au=Nelson,+D.M.&rft.au=Parker,+A.E.&rft.au=Poulton,+A.J.&rft.au=Selph,+K.E.&rft.au=Strutton,+P.G.&rft.au=Taylor,+A.G.&rft.au=Twining,+B.S.&rfr_id=info:sid/en.wikipedia.org:Iron" class="Z3988">
202. ^ Field, E. K.; Kato, S.; Findlay, A. J.; MacDonald, D. J.; Chiu, B. K.; Luther, G. W.; Chan, C. S. (2016). "Planktonic marine iron oxidizers drive iron mineralization under low-oxygen conditions". Geobiology. 14 (5): 499–508\. Bibcode:2016Gbio...14..499F. doi:10.1111/gbi.12189. PMID 27384464.
203. ^ Wells, M.L.; Price, N.M.; Bruland, K.W. (1995). "Iron chemistry in seawater and its relationship to phytoplankton: a workshop report". Marine Chemistry. 48 (2): 157–182\. Bibcode:1995MarCh..48..157W. doi:10.1016/0304-4203(94)00055-I.
204. ^ Lannuzel, D.; Vancoppenolle, M.; van der Merwe, P.; de Jong, J.; Meiners, K.M.; Grotti, M.; Nishioska, J.; Schoemann (2016). "Iron in sea ice: Review and new insights". Elementa: Science of the Anthropocene. 4: 000130. Bibcode:2016EleSA...4.0130L. doi:10.12952/journal.elementa.000130. hdl:2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/247732.
205. ^ Raiswell, R (2011). "Iron Transport from the Continents to the Open Ocean: The Aging–Rejuvenation Cycle". Elements. 7 (2): 101–106\. Bibcode:2011Eleme...7..101R. doi:10.2113/gselements.7.2.101.
206. ^ Tagliabue, A.; Bopp, L.; Aumont, O.; Arrigo, K.R. (2009). "Influence of light and temperature on the marine iron cycle: From theoretical to global modeling" (PDF). Global Biogeochemical Cycles. 23 (2). Bibcode:2009GBioC..23.2017T. doi:10.1029/2008GB003214.

## Bibliography

[edit]

* Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
* Weeks, Mary Elvira; Leichester, Henry M. (1968). "Elements known to the ancients". Discovery of the elements. Easton, PA: Journal of Chemical Education. pp. 29–40. ISBN 0-7661-3872-0. LCCN 68-15217.

## Further reading

[edit]

* H.R. Schubert, History of the British Iron and Steel Industry ... to 1775 AD (Routledge, London, 1957)
* R.F. Tylecote, History of Metallurgy (Institute of Materials, London 1992).
* R.F. Tylecote, "Iron in the Industrial Revolution" in J. Day and R.F. Tylecote, The Industrial Revolution in Metals (Institute of Materials 1991), 200–60.

## External links

[edit]

Wikiquote has quotations related to Iron.

Look up iron in Wiktionary, the free dictionary.

Wikimedia Commons has media related to Iron.

Wikisource has the text of the 1905 New International Encyclopedia article "Iron".

* It's Elemental – Iron
* Iron at The Periodic Table of Videos (University of Nottingham)
* Metallurgy for the non-Metallurgist
* Iron by J. B. Calvert

* v
* t
* e

Periodic table

|  | 1 | 2 |  | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

1 | H |  | He
2 | Li | Be |  | B | C | N | O | F | Ne
3 | Na | Mg |  | Al | Si | P | S | Cl | Ar
4 | K | Ca |  | Sc | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn | Ga | Ge | As | Se | Br | Kr
5 | Rb | Sr |  | Y | Zr | Nb | Mo | Tc | Ru | Rh | Pd | Ag | Cd | In | Sn | Sb | Te | I | Xe
6 | Cs | Ba | La | Ce | Pr | Nd | Pm | Sm | Eu | Gd | Tb | Dy | Ho | Er | Tm | Yb | Lu | Hf | Ta | W | Re | Os | Ir | Pt | Au | Hg | Tl | Pb | Bi | Po | At | Rn
7 | Fr | Ra | Ac | Th | Pa | U | Np | Pu | Am | Cm | Bk | Cf | Es | Fm | Md | No | Lr | Rf | Db | Sg | Bh | Hs | Mt | Ds | Rg | Cn | Nh | Fl | Mc | Lv | Ts | Og

| s-block | f-block | d-block | p-block

|
|
|

* v
* t
* e

Iron compounds

Fe(−II)|

* H2Fe(CO)4
* Na2Fe(CO)4

Fe(0)|

* Fe(CO)5
* Fe2(CO)9
* Fe3(CO)12
* Fe(CO)3CH3COC2H2C6H6

Fe(I)|

* FeH

| Organoiron(I) compounds|

* (C5H5FeCO)2(CO)2

|

Fe(0,II)|

* Fe3C

Fe(II)|

* FeH2
* Mg2FeH6
* FeF2
* FeCl2
* Fe(ClO4)2
* FeBr2
* FeI2
* FeO
* Fe(OH)2
* FeS
* FeSO4
* (NH4)2Fe(SO4)2·6H2O
* FeSe
* FeSeO4
* Fe(NO3)2
* Fe3(PO4)2
* FeSi2
* Fe(BF4)2
* FeCr2O4
* FeMoO4
* FeTiO3
* FeCO3
* FeC2O4
* Fe(C2H3O2)2
* Fe(C3H5O3)2
* FeC6H6O7
* FeC12H22O14
* FeI2(CO)4
* K4Fe(CN)6
* Na3Fe(C2O4)3 / K2Fe(C2O4)2

| Organoiron(II) compounds|

* Fe(C5H5)2
* Fe(C5H5)(CO)2I
* Fe(C5H4P(C6H5)2)2
* C4H4Fe(CO)3
* C4H6Fe(CO)3

|

Fe(0,III)|

* FeSi
* FeGe

Fe(II,III)|

* Fe3O4
* Fe3S4
* Prussian blue

Fe(III)|

* FeI3
* FeBr3
* FeCl3
* FeF3
* FeP
* Fe(NO3)3
* Fe(acac)3
* FeOCl
* [(C2H5)4N][O(FeCl3)2]
* FeO(OH)
* FePO4
* Fe4(P2O7)3
* Fe2(CrO4)3
* Fe2(C2O4)3
* Fe2O3
* Fe2(SeO3)3
* Fe2S3
* Fe2(SO4)3
* Fe(N3)3
* NH4Fe(SO4)2·12H2O
* C6H8O7·xFe3+·yNH3
* C
54H
105FeO

* K3Fe(CN)6
* K3Fe(C2O4)3

| Organoiron(III) compounds|

* Fe(C5H5)2BF4

|

Fe(IV)|

* FeF4

Fe(VI)|

* K2FeO4
* BaFeO4

Purported|

* Hemolithin (protein)

Authority control databases

National|

* Germany
* United States
* France
* BnF data
* Japan
* Czech Republic
* Spain
* Israel

Other|

* Historical Dictionary of Switzerland
* Yale LUX

*[P]: Pressure
*[T]: Temperature
*[v]: View this template
*[e]: Edit this template
*[t]: Discuss this template