Label Information Base

The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted.
Find sources: "Label Information Base" – news · newspapers · books · scholar · JSTOR (December 2020) (Learn how and when to remove this message)

|

Label Information Base (LIB) is the software table maintained by IP/MPLS capable routers to store the details of port and the corresponding MPLS router label to be popped/pushed on incoming/outgoing MPLS packets.

Entries are populated from label-distribution protocols.

LDP is a protocol that automatically generates and exchanges labels between routers. Each router will locally generate labels for its prefixes and will then advertise the label values to its neighbors. It's a standard, based on Cisco's proprietary TDP (Tag Distribution Protocol). Nowadays almost everyone uses LDP instead of TDP.

LDP first establishes a neighbor adjacency before it exchanges label information. It works a bit differently than most protocols though. LIB functions in the control plane of router's MPLS layer. It is used by the label distribution protocol for mapping the next hop labels. [1]

## References

[edit]

1. ^ "MPLS LDP (Label Distribution Protocol)". 20 August 2015.

This computer networking article is a stub. You can help Wikipedia by expanding it.

|

* v
* t
* e

*[v]: View this template
*[t]: Discuss this template
*[e]: Edit this template